{"title":"Cementitious","description":"\u003cp\u003ePowder or premixed mineral-based adhesives, grouts and repair mortars for masonry, tile and concrete. Apply by trowel; match notch size, water ratio and open time to the substrate. Consider compressive strength and flexibility requirements. Use filters to refine by set speed and application method. Always review the product page and TDS\/SDS.\u003c\/p\u003e","products":[{"product_id":"davco-smp-evo-tile-adhesive-5kg","title":"Davco SMP Evo Tile Adhesive 5kg","description":"\u003cp data-end=\"652\" data-start=\"253\"\u003eDavco SMP Evo Tile Adhesive is a high-performance, flexible cement-based adhesive ideal for the installation of natural stone, porcelain, and marble tiles. Specially designed with advanced low-dust technology, it provides a cleaner and safer working environment. Its superior non-slump properties make it perfect for wall and floor tiling, including large-format tiles.\u003c\/p\u003e\n\n\u003cp data-end=\"922\" data-start=\"654\"\u003e\u003cstrong data-end=\"678\" data-start=\"654\"\u003eSurface Preparation:\u003c\/strong\u003e\u003cbr data-end=\"681\" data-start=\"678\"\u003e\nEnsure surfaces are structurally sound, dry, and free from contaminants like dust, oil, and wax. Smooth surfaces should be roughened slightly, and absorbent substrates should be primed. Existing tiles must be clean, dry, and securely bonded.\u003c\/p\u003e\n\n\u003cp data-end=\"1151\" data-start=\"924\"\u003e\u003cstrong data-end=\"935\" data-start=\"924\"\u003eMixing:\u003c\/strong\u003e\u003cbr data-end=\"938\" data-start=\"935\"\u003e\nMix 5kg of powder with approximately 1.4–1.5L of clean water using a mechanical mixer until a smooth, lump-free paste is formed. Allow it to stand for 5 minutes before remixing. Do not add more water after mixing.\u003c\/p\u003e\n\n\u003cp data-end=\"1433\" data-start=\"1153\"\u003e\u003cstrong data-end=\"1169\" data-start=\"1153\"\u003eApplication:\u003c\/strong\u003e\u003cbr data-end=\"1172\" data-start=\"1169\"\u003e\nApply the adhesive with a notched trowel over an area no larger than can be tiled within the open time. Firmly press tiles into the adhesive bed with a twisting motion to ensure full contact. Back-buttering may be necessary for large tiles or uneven substrates.\u003c\/p\u003e\n\n\u003cp data-end=\"1514\" data-start=\"1435\"\u003e\u003cstrong data-end=\"1448\" data-start=\"1435\"\u003eCoverage:\u003c\/strong\u003e\u003cbr data-end=\"1451\" data-start=\"1448\"\u003e\nApproximately 1.5–1.75m² per 5kg bag using a 10mm notch trowel.\u003c\/p\u003e\n\n\u003cp data-end=\"1676\" data-start=\"1516\"\u003e\u003cstrong data-end=\"1532\" data-start=\"1516\"\u003eDrying Time:\u003c\/strong\u003e\u003cbr data-end=\"1535\" data-start=\"1532\"\u003e\nTiles can generally be grouted after 24 hours. Allow 2 days before exposure to water in wet areas and 21 days for submerged areas like pools.\u003c\/p\u003e\n\n\u003cp data-end=\"1803\" data-start=\"1678\"\u003e\u003cstrong data-end=\"1691\" data-start=\"1678\"\u003eClean-up:\u003c\/strong\u003e\u003cbr data-end=\"1694\" data-start=\"1691\"\u003e\nClean tools and excess adhesive with water before it sets. Once cured, adhesive must be removed mechanically.\u003c\/p\u003e\n\n\u003cp data-end=\"1826\" data-start=\"1805\"\u003e\u003cstrong data-end=\"1824\" data-start=\"1805\"\u003eTechnical Data:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul data-end=\"1986\" data-start=\"1827\"\u003e\n\u003cli data-end=\"1853\" data-start=\"1827\"\u003e\n\u003cp data-end=\"1853\" data-start=\"1829\"\u003eClassification: C2S1TE\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"1877\" data-start=\"1854\"\u003e\n\u003cp data-end=\"1877\" data-start=\"1856\"\u003ePot life: 1.5 hours\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"1903\" data-start=\"1878\"\u003e\n\u003cp data-end=\"1903\" data-start=\"1880\"\u003eOpen time: 30 minutes\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"1938\" data-start=\"1904\"\u003e\n\u003cp data-end=\"1938\" data-start=\"1906\"\u003eAdjustability time: 20 minutes\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"1959\" data-start=\"1939\"\u003e\n\u003cp data-end=\"1959\" data-start=\"1941\"\u003eVOC content: Low\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"1986\" data-start=\"1960\"\u003e\n\u003cp data-end=\"1986\" data-start=\"1962\"\u003eAppearance: White powder\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Davco","offers":[{"title":"Default Title","offer_id":52323813556590,"sku":"GA9312095008788","price":30.14,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/files\/9312095008788_9a4ef395-98ac-4cc6-b2aa-4357b7d06642.jpg?v=1754712591"},{"product_id":"dunlop-floor-repairer-rapid-patch-mortar-5kg","title":"Dunlop Floor Repairer Rapid Patch Mortar – 5kg","description":"\u003cp data-end=\"655\" data-start=\"238\"\u003eDunlop Floor Repairer Rapid Patch Mortar is a high-performance, fast-setting compound ideal for repairing holes, cracks, and uneven surfaces on internal floors. Suitable for use prior to the installation of tiles, vinyl, carpet, or other floor coverings, it delivers a smooth, level finish ready for light foot traffic within 45 minutes and covering applications in as little as 2 hours.\u003c\/p\u003e\n\n\u003cp data-end=\"1069\" data-start=\"657\"\u003e\u003cstrong data-end=\"681\" data-start=\"657\"\u003eSurface Preparation:\u003c\/strong\u003e\u003cbr data-end=\"684\" data-start=\"681\"\u003e\nEnsure the substrate is clean, sound, and free of grease, dust, oil, paint, or other contaminants. Surfaces should be dry and firm. Smooth or sealed surfaces must be roughened or etched. For porous substrates like timber, fibre-cement, or plasterboard, priming may be required. For floors in direct contact with soil, a moisture barrier should be used before applying the patch mortar.\u003c\/p\u003e\n\n\u003cp data-end=\"1294\" data-start=\"1071\"\u003e\u003cstrong data-end=\"1095\" data-start=\"1071\"\u003eMixing Instructions:\u003c\/strong\u003e\u003cbr data-end=\"1098\" data-start=\"1095\"\u003e\nAdd 5kg of product into approximately 1.5L of clean water in a clean container. Mix thoroughly with a mixing paddle to a lump-free, smooth consistency. Mix only what can be used within 15 minutes.\u003c\/p\u003e\n\n\u003cp data-end=\"1603\" data-start=\"1296\"\u003e\u003cstrong data-end=\"1325\" data-start=\"1296\"\u003eApplication Instructions:\u003c\/strong\u003e\u003cbr data-end=\"1328\" data-start=\"1325\"\u003e\nApply with a steel trowel to the required thickness (up to 20mm in a single application). Shape and smooth the surface before the material begins to set. For deeper repairs, additional layers can be applied once the initial layer has set. Avoid adding extra water once mixed.\u003c\/p\u003e\n\n\u003cp data-end=\"1728\" data-start=\"1605\"\u003e\u003cstrong data-end=\"1618\" data-start=\"1605\"\u003eCoverage:\u003c\/strong\u003e\u003cbr data-end=\"1621\" data-start=\"1618\"\u003e\nApproximately 3m² at 1mm thickness per 5kg bag. Coverage varies with surface texture and thickness applied.\u003c\/p\u003e\n\n\u003cp data-end=\"1748\" data-start=\"1730\"\u003e\u003cstrong data-end=\"1746\" data-start=\"1730\"\u003eDrying Time:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul data-end=\"1905\" data-start=\"1749\"\u003e\n\u003cli data-end=\"1777\" data-start=\"1749\"\u003e\n\u003cp data-end=\"1777\" data-start=\"1751\"\u003eInitial set: ~45 minutes\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"1834\" data-start=\"1778\"\u003e\n\u003cp data-end=\"1834\" data-start=\"1780\"\u003eReady for coverings (tiles, vinyl, carpet): ~2 hours\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"1905\" data-start=\"1835\"\u003e\n\u003cp data-end=\"1905\" data-start=\"1837\"\u003eFinal cure: 24 hours (depending on thickness and ambient conditions)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp data-end=\"1995\" data-start=\"1907\"\u003e\u003cstrong data-end=\"1920\" data-start=\"1907\"\u003eClean Up:\u003c\/strong\u003e\u003cbr data-end=\"1923\" data-start=\"1920\"\u003e\nClean tools and equipment immediately with water before the mortar sets.\u003c\/p\u003e\n\n\u003cp data-end=\"2018\" data-start=\"1997\"\u003e\u003cstrong data-end=\"2016\" data-start=\"1997\"\u003eTechnical Data:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul data-end=\"2287\" data-start=\"2019\"\u003e\n\u003cli data-end=\"2069\" data-start=\"2019\"\u003e\n\u003cp data-end=\"2069\" data-start=\"2021\"\u003eType: Rapid-setting cementitious repair mortar\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2107\" data-start=\"2070\"\u003e\n\u003cp data-end=\"2107\" data-start=\"2072\"\u003eApplication Thickness: Up to 20mm\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2132\" data-start=\"2108\"\u003e\n\u003cp data-end=\"2132\" data-start=\"2110\"\u003ePot Life: 15 minutes\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2161\" data-start=\"2133\"\u003e\n\u003cp data-end=\"2161\" data-start=\"2135\"\u003eFoot Traffic: 45 minutes\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2194\" data-start=\"2162\"\u003e\n\u003cp data-end=\"2194\" data-start=\"2164\"\u003eReady for Coverings: 2 hours\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2211\" data-start=\"2195\"\u003e\n\u003cp data-end=\"2211\" data-start=\"2197\"\u003eColour: Grey\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2287\" data-start=\"2212\"\u003e\n\u003cp data-end=\"2287\" data-start=\"2214\"\u003eShelf Life: 12 months in original unopened packaging stored in a dry area\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Dunlop","offers":[{"title":"Default Title","offer_id":52323813753198,"sku":"GA9315021022674","price":39.52,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/files\/Dunlop-FloorRepairerRapidPatch5kg-20050_1.jpg?v=1783140254"},{"product_id":"dunlop-multipurpose-floor-leveller-5kg","title":"Dunlop Multipurpose Floor Leveller – 5kg","description":"\u003cp data-end=\"659\" data-start=\"239\"\u003eDunlop Multipurpose Floor Leveller is a high-flow, cement-based compound ideal for smoothing and levelling uneven internal concrete surfaces before applying tiles, vinyl, carpet, or other floor coverings. Designed for ease of use, it pours and spreads to form a smooth surface ready for foot traffic and covering in minimal time. It’s perfect for domestic and light commercial applications.\u003c\/p\u003e\n\n\u003cp data-end=\"987\" data-start=\"661\"\u003e\u003cstrong data-end=\"685\" data-start=\"661\"\u003eSurface Preparation:\u003c\/strong\u003e\u003cbr data-end=\"688\" data-start=\"685\"\u003e\nEnsure the surface is sound, dry, and clean. Remove all traces of dust, grease, oil, curing compounds, wax, or any loose particles. New concrete must be fully cured. Mechanically remove surface laitance or contamination. Porous surfaces may require priming to reduce absorption and improve adhesion.\u003c\/p\u003e\n\n\u003cp data-end=\"1181\" data-start=\"989\"\u003e\u003cstrong data-end=\"1015\" data-start=\"989\"\u003ePriming (if required):\u003c\/strong\u003e\u003cbr data-end=\"1018\" data-start=\"1015\"\u003e\nApply a compatible primer using a broom or roller and allow it to dry before applying the leveller. On extremely porous substrates, a second coat may be necessary.\u003c\/p\u003e\n\n\u003cp data-end=\"1439\" data-start=\"1183\"\u003e\u003cstrong data-end=\"1207\" data-start=\"1183\"\u003eMixing Instructions:\u003c\/strong\u003e\u003cbr data-end=\"1210\" data-start=\"1207\"\u003e\nSlowly add the contents of the 5kg bag to approximately 1L of clean water while stirring with a mixing paddle. Mix for 2–3 minutes until a lump-free, smooth consistency is achieved. Do not retemper once the mixture begins to set.\u003c\/p\u003e\n\n\u003cp data-end=\"1723\" data-start=\"1441\"\u003e\u003cstrong data-end=\"1470\" data-start=\"1441\"\u003eApplication Instructions:\u003c\/strong\u003e\u003cbr data-end=\"1473\" data-start=\"1470\"\u003e\nPour the mixed product onto the floor and spread using a steel trowel or smoothing blade. The product will self-level and settle to a smooth finish. Apply at a thickness of 1–10mm in one application. Protect from foot traffic until it is fully cured.\u003c\/p\u003e\n\n\u003cp data-end=\"1851\" data-start=\"1725\"\u003e\u003cstrong data-end=\"1738\" data-start=\"1725\"\u003eCoverage:\u003c\/strong\u003e\u003cbr data-end=\"1741\" data-start=\"1738\"\u003e\nCovers approximately 3.5m² at 1mm thickness per 5kg bag. Coverage varies with substrate texture and thickness.\u003c\/p\u003e\n\n\u003cp data-end=\"1871\" data-start=\"1853\"\u003e\u003cstrong data-end=\"1869\" data-start=\"1853\"\u003eDrying Time:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul data-end=\"2042\" data-start=\"1872\"\u003e\n\u003cli data-end=\"1893\" data-start=\"1872\"\u003e\n\u003cp data-end=\"1893\" data-start=\"1874\"\u003eWalkable: 4 hours\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"1925\" data-start=\"1894\"\u003e\n\u003cp data-end=\"1925\" data-start=\"1896\"\u003eReady for tiling: 4–6 hours\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2042\" data-start=\"1926\"\u003e\n\u003cp data-end=\"2042\" data-start=\"1928\"\u003eReady for other coverings: 24 hours\u003cbr data-end=\"1966\" data-start=\"1963\"\u003e\nDry times will vary depending on temperature, humidity, and layer thickness.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp data-end=\"2180\" data-start=\"2044\"\u003e\u003cstrong data-end=\"2057\" data-start=\"2044\"\u003eClean Up:\u003c\/strong\u003e\u003cbr data-end=\"2060\" data-start=\"2057\"\u003e\nClean tools and mixing equipment with water immediately after use. Do not allow the product to dry on tools or surfaces.\u003c\/p\u003e\n\n\u003cp data-end=\"2203\" data-start=\"2182\"\u003e\u003cstrong data-end=\"2201\" data-start=\"2182\"\u003eTechnical Data:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul data-end=\"2461\" data-start=\"2204\"\u003e\n\u003cli data-end=\"2250\" data-start=\"2204\"\u003e\n\u003cp data-end=\"2250\" data-start=\"2206\"\u003eType: Cement-based self-levelling compound\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2289\" data-start=\"2251\"\u003e\n\u003cp data-end=\"2289\" data-start=\"2253\"\u003eApplication Thickness: 1mm to 10mm\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2321\" data-start=\"2290\"\u003e\n\u003cp data-end=\"2321\" data-start=\"2292\"\u003eWorking Time: 15–20 minutes\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2349\" data-start=\"2322\"\u003e\n\u003cp data-end=\"2349\" data-start=\"2324\"\u003eWalkable: After 4 hours\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2380\" data-start=\"2350\"\u003e\n\u003cp data-end=\"2380\" data-start=\"2352\"\u003eFinal Cure: Up to 24 hours\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2397\" data-start=\"2381\"\u003e\n\u003cp data-end=\"2397\" data-start=\"2383\"\u003eColour: Grey\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2461\" data-start=\"2398\"\u003e\n\u003cp data-end=\"2461\" data-start=\"2400\"\u003eShelf Life: 12 months if stored in original, sealed packaging\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Dunlop","offers":[{"title":"Default Title","offer_id":52323813884270,"sku":"GA9315021021318","price":40.2,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/files\/9315021021318_23476d37-d896-4e7e-b36b-16b7a72f53bd.jpg?v=1754712578"},{"product_id":"dunlop-tile-adhesive-wall-floor-indoor-outdoor-2kg","title":"Dunlop Tile Adhesive Wall \u0026 Floor Indoor \u0026 Outdoor 2Kg","description":"\u003cp\u003eThis versatile adhesive is specially formulated for fixing most tile types, offering excellent flexibility and suitability for various surfaces.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features:\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003eSuitable for most tile types\u003c\/li\u003e\n\u003cli\u003eCan be applied over a variety of surfaces\u003c\/li\u003e\n\u003cli\u003eSuitable for interior timber (with proper preparation)\u003c\/li\u003e\n\u003cli\u003eHighly flexible\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTile Types:\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003eCeramic tiles\u003c\/li\u003e\n\u003cli\u003eFully vitrified tiles\u003c\/li\u003e\n\u003cli\u003eMosaics\u003c\/li\u003e\n\u003cli\u003ePorcelain tiles\u003c\/li\u003e\n\u003cli\u003eNatural stone (excluding moisture-sensitive stone)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSuitable Surfaces:\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003eCement render and concrete\u003c\/li\u003e\n\u003cli\u003eFibre-cement sheets\u003c\/li\u003e\n\u003cli\u003eExisting ceramic and vinyl tiles\u003c\/li\u003e\n\u003cli\u003eDunlop Undertile Waterproofing\u003c\/li\u003e\n\u003cli\u003eMetal surfaces\u003c\/li\u003e\n\u003cli\u003eOil-based painted surfaces\u003c\/li\u003e\n\u003cli\u003ePlasterboard\u003c\/li\u003e\n\u003cli\u003eIndoor timber (must be adequately prepared)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplication Areas:\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003eWalls and floors\u003c\/li\u003e\n\u003cli\u003eIndoor and outdoor use (as long as there’s no standing water and proper water run-off is ensured)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCoverage:\u003c\/h3\u003e\n\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eTile Size\u003c\/th\u003e\n\u003cth\u003eTrowel Size\u003c\/th\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eUp to 250 x 250mm\u003c\/td\u003e\n\u003ctd\u003e6-8mm\u003c\/td\u003e\n\u003ctd\u003e0.8m²\/kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e250 x 250mm and larger\u003c\/td\u003e\n\u003ctd\u003e10-12mm\u003c\/td\u003e\n\u003ctd\u003e0.5m²\/kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n","brand":"Dunlop","offers":[{"title":"Default Title","offer_id":52323814310254,"sku":"GA9315021021158","price":39.01,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/files\/9315021021158_01df39a8-7122-4d11-953f-99cd1ef07698.png?v=1754712567"},{"product_id":"dunlop-tile-all-tile-adhesive-indoor-outdoor-2kg","title":"Dunlop Tile-All Tile Adhesive Indoor \u0026 Outdoor 2Kg","description":"\u003cp\u003e\u003cstrong\u003eHigh-Performance Multipurpose Wall \u0026amp; Floor Tile Adhesive\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis versatile adhesive is designed for fixing almost all tile types to a wide range of challenging surfaces, including water features and swimming pools.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features:\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003eSuitable for both walls and floors\u003c\/li\u003e\n\u003cli\u003eCan be applied over difficult surfaces, including water features\u003c\/li\u003e\n\u003cli\u003eAllows tiling over existing tiles\u003c\/li\u003e\n\u003cli\u003eCompatible with most types of ceramic and natural stone (excluding moisture-sensitive stone)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTile Types:\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003eCeramic tiles\u003c\/li\u003e\n\u003cli\u003eFully vitrified tiles\u003c\/li\u003e\n\u003cli\u003eNatural stone (excluding moisture-sensitive stone)\u003c\/li\u003e\n\u003cli\u003eMosaics\u003c\/li\u003e\n\u003cli\u003ePorcelain\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSuitable Surfaces:\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003eExisting tiles\u003c\/li\u003e\n\u003cli\u003eGlazed ceramic tiles\u003c\/li\u003e\n\u003cli\u003eMetal\u003c\/li\u003e\n\u003cli\u003eRoughened fibreglass\u003c\/li\u003e\n\u003cli\u003eTimber (particleboard only)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplication Areas:\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003eWalls and floors\u003c\/li\u003e\n\u003cli\u003eIndoor and outdoor\u003c\/li\u003e\n\u003cli\u003eWater features and swimming pools\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCoverage:\u003c\/h3\u003e\n\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eTile Size\u003c\/th\u003e\n\u003cth\u003eTrowel Size\u003c\/th\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eUp to 250 x 250mm\u003c\/td\u003e\n\u003ctd\u003e6-8mm\u003c\/td\u003e\n\u003ctd\u003e0.4m²\/kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e250 x 250mm and larger\u003c\/td\u003e\n\u003ctd\u003e10-12mm\u003c\/td\u003e\n\u003ctd\u003e0.25m²\/kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n","brand":"Dunlop","offers":[{"title":"Default Title","offer_id":52323814343022,"sku":"GA9315021021967","price":49.42,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/files\/9315021021967_53e503ee-fc64-4133-b9a9-a93944e7a3e9.png?v=1754712566"},{"product_id":"parfix-multipurpose-filler-powder-sandable-paintable-x-500g","title":"Parfix Multipurpose Filler Powder Sandable Paintable x 500g","description":"\u003cp\u003ePartix Multipurpose Filler Powder This product is ideal for filling cracks, holes and gaps inside the home. It is strong and can be easily sanded to a smooth finish ready for painting. When dry, it can be nailed or screwed without splitting or breaking.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSUITABLE FOR\u003c\/strong\u003e\u003cbr\u003e\nInterior repairs to plaster, brick, plasterboard, masonry and timber. For repairs where movement occurs, use Parfix Gap Filler.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003ePREPARATION\u003c\/strong\u003e\u003cbr\u003e\nEnsure surfaces are clean, dry and free from dust and loose material. Glossy surfaces should be roughened with sandpaper to provide key.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eMIXING\u003c\/strong\u003e\u003cbr\u003e\nAdd 2½ parts of Parfix Multi-Purpose Filler to 1 part water (by volume) and mix thoroughly into a smooth paste with a clean filling knife.\u003cbr\u003e\nOnce mixed, stays workable for up to 45 minutes.\u003cbr\u003e\nDo not add water to extend working time. 4 Contamination with dried filler will shorten the working time.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eAPPLICATION\u003c\/strong\u003e\u003cbr\u003e\nPress filler into crack with a flexible filling blade (overfilling slightly to allow for sanding back) then smooth off.\u003cbr\u003e\nWait 3-4 hours for filler to dry before sanding with a medium grade sandpaper Use a damp sponge to wipe away dist\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCLEANING\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eClean tools with water and reseal pack after use. Store in a cool, dry place.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003ePAINT PREPARATION\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBefore painting, apply a suitable primer\/undercoat\u003c\/p\u003e\n","brand":"Parfix","offers":[{"title":"Default Title","offer_id":52323820929390,"sku":"GA9300697116222","price":14.75,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/files\/9300697116222_63669c48-a873-43d9-aa23-a92d1ebb732e.jpg?v=1754712255"},{"product_id":"poly-multipurpose-exterior-powder-filler-2kg","title":"Poly Multipurpose Exterior Powder Filler 2Kg","description":"\u003cp\u003eA vinyl reinforced cement-based filler that is water and weather resistant.\u003cbr\u003e\nMatches cement grey when set and easily sands whilst maintaining the strength of cement.\u003c\/p\u003e\n\n\u003cp\u003eCan be nailed and screwed without splitting or breaking. \u003c\/p\u003e\n\n\u003cp\u003eWill not shrink when used in accordance with directions, making it suitable for use in patching steps, paths, paving etc.\u003c\/p\u003e\n\n\u003cp\u003eFor use on: Bricks, cement, stone and other masonry surfaces (EXTERIOR). May be used in interior wet areas and as ceramic floor tile cement.\u003cbr\u003e\nFill depth: Dependent on mix ratio\u003cbr\u003e\nDries in: 5-6 hours for sanding. Allow 24 hours before painting.\u003cbr\u003e\nReady to use: NO (mix with water)\u003cbr\u003e\nAvailable in: 500g \u0026amp; 2kg\u003cbr\u003e\nColour: Grey and can be tinted by adding cement colorants to the mixing water.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eApplication tips:\u003c\/strong\u003e\u003cbr\u003e\n• Surface to be filled should be clean and dry with no loose or powdery material. Do not wet or prime surfaces before filling.\u003cbr\u003e\n• Coat nail heads with oil based paint prior to filling to prevent rust staining.\u003cbr\u003e\n• Add 4 parts Polyfilla Exterior Powder Filler to 1 part water in a clean container and mix thoroughly into a smooth paste. Use mix within 30 minutes and do not add water to extend working time.\u003cbr\u003e\n• For deeper cracks and holes and on very absorbent surfaces it is advisable to use a slightly stiffer (less water) mix.\u003cbr\u003e\n• Use a clothes peg to reseal the pack.\u003cbr\u003e\n• Press in the mixed filler with a filling knife or trowel and finish with a slightly rounded surface. Where a smooth surface is required, slightly overfill the surface, allow to dry (approx. 5-6 hours), then sand smooth with medium grade sandpaper.\u003cbr\u003e\n• Leave for 24 hours, and then apply a suitable primer\/undercoat before painting.\u003cbr\u003e\n• When applying in thin layers, do not over trowel.\u003cbr\u003e\n• Clean up with water before filler dries\u003c\/p\u003e\n","brand":"Poly","offers":[{"title":"Default Title","offer_id":52323823681902,"sku":"GA9310168101510","price":54.08,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/files\/9310168101510_6e5151e0-f66c-449e-9c39-ead70ef6a15e.jpg?v=1754712207"},{"product_id":"poly-multipurpose-exterior-powder-filler-500g","title":"Poly Multipurpose Exterior Powder Filler 500g","description":"\u003cp\u003eA vinyl reinforced cement-based filler that is water and weather resistant.\u003cbr\u003e\nMatches cement grey when set and easily sands whilst maintaining the strength of cement.\u003c\/p\u003e\n\n\u003cp\u003eCan be nailed and screwed without splitting or breaking. \u003c\/p\u003e\n\n\u003cp\u003eWill not shrink when used in accordance with directions, making it suitable for use in patching steps, paths, paving etc.\u003c\/p\u003e\n\n\u003cp\u003eFor use on: Bricks, cement, stone and other masonry surfaces (EXTERIOR). May be used in interior wet areas and as ceramic floor tile cement.\u003cbr\u003e\nFill depth: Dependent on mix ratio\u003cbr\u003e\nDries in: 5-6 hours for sanding. Allow 24 hours before painting.\u003cbr\u003e\nReady to use: NO (mix with water)\u003cbr\u003e\nAvailable in: 500g \u0026amp; 2kg\u003cbr\u003e\nColour: Grey and can be tinted by adding cement colorants to the mixing water.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eApplication tips:\u003c\/strong\u003e\u003cbr\u003e\n• Surface to be filled should be clean and dry with no loose or powdery material. Do not wet or prime surfaces before filling.\u003cbr\u003e\n• Coat nail heads with oil based paint prior to filling to prevent rust staining.\u003cbr\u003e\n• Add 4 parts Polyfilla Exterior Powder Filler to 1 part water in a clean container and mix thoroughly into a smooth paste. Use mix within 30 minutes and do not add water to extend working time.\u003cbr\u003e\n• For deeper cracks and holes and on very absorbent surfaces it is advisable to use a slightly stiffer (less water) mix.\u003cbr\u003e\n• Use a clothes peg to reseal the pack.\u003cbr\u003e\n• Press in the mixed filler with a filling knife or trowel and finish with a slightly rounded surface. Where a smooth surface is required, slightly overfill the surface, allow to dry (approx. 5-6 hours), then sand smooth with medium grade sandpaper.\u003cbr\u003e\n• Leave for 24 hours, and then apply a suitable primer\/undercoat before painting.\u003cbr\u003e\n• When applying in thin layers, do not over trowel.\u003cbr\u003e\n• Clean up with water before filler dries\u003c\/p\u003e\n","brand":"Poly","offers":[{"title":"Default Title","offer_id":52323823714670,"sku":"GA9310168101411","price":21.6,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/files\/9310168101411_f2f3d642-6082-439b-8edb-6dc15fcb4be1.jpg?v=1754712205"},{"product_id":"poly-multipurpose-interior-powder-filler-1kg","title":"Poly Multipurpose Interior Powder Filler 1Kg","description":"\u003cp\u003e\u003cstrong\u003eA cellulose reinforced plaster-based filler for filling interior cracks and holes that won't shrink.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eFor use on: Plasterboard, brick, masonry \u0026amp; wood. Can be used also for modelling \u0026amp; sculpting (INTERIOR)\u003cbr\u003e\nFill depth: Dependent on mix ratio\u003cbr\u003e\nDries in: 2-3 hours\u003cbr\u003e\nReady to use: NO (mix with water)\u003cbr\u003e\nAvailable in: 500g, 1kg, 2kg \u0026amp; 6kg\u003cbr\u003e\nColour: Off-white\u003c\/p\u003e\n\n\u003cp\u003e• Surface to be filled should be clean and dry with no loose or powdery material. Roughen glossy surfaces to provide a key.\u003cbr\u003e\n• Ensure tools and mixing vessels are clean, as dried residue filler will  accelerate drying rate.\u003cbr\u003e\n• Add 2.5 parts Polyfilla Interior Powder Filler to 1 part tap water and mix thoroughly into a paste with a clean knife. Once mixed, filler should be used within 1 hour. For deep cracks and holes it is advisable to use a slightly stiffer (less water) mix.\u003cbr\u003e\n• Use a clothes peg to reseal the pack.\u003cbr\u003e\n• Using a filling knife or applicator, press the mixed filler into the crack and smooth off. Slightly overfill and allow to dry before sanding. Use medium grade sandpaper and dust off. Wipe the dusted surface with a damp sponge.\u003cbr\u003e\n• Leave for 2-3 hours before sanding and decorating.\u003cbr\u003e\n• For best results prime repaired surface with paint undercoat paint or sealer prior to repainting the whole area.\u003cbr\u003e\n• Clean up with water before filler dries\u003c\/p\u003e\n","brand":"Poly","offers":[{"title":"Default Title","offer_id":52323823747438,"sku":"GA9310168100711","price":28.08,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/files\/9310168100711_1be07da6-3800-48f9-8784-319944a22437.jpg?v=1754712204"},{"product_id":"poly-multipurpose-interior-powder-filler-2kg","title":"Poly Multipurpose Interior Powder Filler 2Kg","description":"\u003cp\u003e\u003cstrong\u003eA cellulose reinforced plaster-based filler for filling interior cracks and holes that won't shrink.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eFor use on: Plasterboard, brick, masonry \u0026amp; wood. Can be used also for modelling \u0026amp; sculpting (INTERIOR)\u003cbr\u003e\nFill depth: Dependent on mix ratio\u003cbr\u003e\nDries in: 2-3 hours\u003cbr\u003e\nReady to use: NO (mix with water)\u003cbr\u003e\nAvailable in: 500g, 1kg, 2kg \u0026amp; 6kg\u003cbr\u003e\nColour: Off-white\u003c\/p\u003e\n\n\u003cp\u003e• Surface to be filled should be clean and dry with no loose or powdery material. Roughen glossy surfaces to provide a key.\u003cbr\u003e\n• Ensure tools and mixing vessels are clean, as dried residue filler will  accelerate drying rate.\u003cbr\u003e\n• Add 2.5 parts Polyfilla Interior Powder Filler to 1 part tap water and mix thoroughly into a paste with a clean knife. Once mixed, filler should be used within 1 hour. For deep cracks and holes it is advisable to use a slightly stiffer (less water) mix.\u003cbr\u003e\n• Use a clothes peg to reseal the pack.\u003cbr\u003e\n• Using a filling knife or applicator, press the mixed filler into the crack and smooth off. Slightly overfill and allow to dry before sanding. Use medium grade sandpaper and dust off. Wipe the dusted surface with a damp sponge.\u003cbr\u003e\n• Leave for 2-3 hours before sanding and decorating.\u003cbr\u003e\n• For best results prime repaired surface with paint undercoat paint or sealer prior to repainting the whole area.\u003cbr\u003e\n• Clean up with water before filler dries\u003c\/p\u003e\n","brand":"Poly","offers":[{"title":"Default Title","offer_id":52323823780206,"sku":"GA93101681","price":46.15,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/files\/93101681_8deca3e5-b849-46f6-b64e-c2af9b52bd52.jpg?v=1754712202"},{"product_id":"poly-multipurpose-interior-powder-filler-500g","title":"Poly Multipurpose Interior Powder Filler 500g","description":"\u003cp\u003e\u003cstrong\u003eA cellulose reinforced plaster-based filler for filling interior cracks and holes that won't shrink.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eFor use on: Plasterboard, brick, masonry \u0026amp; wood. Can be used also for modelling \u0026amp; sculpting (INTERIOR)\u003cbr\u003e\nFill depth: Dependent on mix ratio\u003cbr\u003e\nDries in: 2-3 hours\u003cbr\u003e\nReady to use: NO (mix with water)\u003cbr\u003e\nAvailable in: 500g, 1kg, 2kg \u0026amp; 6kg\u003cbr\u003e\nColour: Off-white\u003c\/p\u003e\n\n\u003cp\u003e• Surface to be filled should be clean and dry with no loose or powdery material. Roughen glossy surfaces to provide a key.\u003cbr\u003e\n• Ensure tools and mixing vessels are clean, as dried residue filler will  accelerate drying rate.\u003cbr\u003e\n• Add 2.5 parts Polyfilla Interior Powder Filler to 1 part tap water and mix thoroughly into a paste with a clean knife. Once mixed, filler should be used within 1 hour. For deep cracks and holes it is advisable to use a slightly stiffer (less water) mix.\u003cbr\u003e\n• Use a clothes peg to reseal the pack.\u003cbr\u003e\n• Using a filling knife or applicator, press the mixed filler into the crack and smooth off. Slightly overfill and allow to dry before sanding. Use medium grade sandpaper and dust off. Wipe the dusted surface with a damp sponge.\u003cbr\u003e\n• Leave for 2-3 hours before sanding and decorating.\u003cbr\u003e\n• For best results prime repaired surface with paint undercoat paint or sealer prior to repainting the whole area.\u003cbr\u003e\n• Clean up with water before filler dries\u003c\/p\u003e\n","brand":"Poly","offers":[{"title":"Default Title","offer_id":52323823812974,"sku":"GA9310168100612","price":23.38,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/files\/9310168100612_620ee40d-b54f-43dd-ac15-5b7be0e6424b.jpg?v=1754712201"},{"product_id":"polyfilla-exterior-masonry-filler-x-2-2kg","title":"Polyfilla Exterior Masonry Filler x 2.2Kg","description":"\u003cp\u003eA ready-mixed filler that dries hard to a durable finish for deep and wide cracks in mortar, concrete, cement render and brick.\u003c\/p\u003e\n\n\u003cp\u003eWater, weather, UV, algae and mould resistant\u003c\/p\u003e\n\n\u003cp\u003eCan be tooled to a render texture or sanded to a smooth finish.\u003c\/p\u003e\n\n\u003cp\u003eFor use on: Bricks, concrete, bare or painted cement render \u0026amp; other masonry surfaces (EXTERIOR \u0026amp; INTERIOR)\u003cbr\u003e\nFill depth: Up to 10mm\u003cbr\u003e\nDries in: 3 hours\u003cbr\u003e\nReady to use: YES\u003cbr\u003e\n\u003cbr\u003e\nColour: Cement grey in colour but can be painted over with both oil and water based paints\u003c\/p\u003e\n\n\u003cp\u003e• Ensure surfaces are clean and free from dust, grease, mould\/algae and  flaking\/powdery paint or material. If necessary wash with Poly Sugar Soap.\u003cbr\u003e\n• Rinse thoroughly and allow surface to dry.\u003cbr\u003e\n• Use flexible filling blade to press filler into hole, or trowel to spread a thin\u003cbr\u003e\nlayer over surface, and tool to a feathered edge.\u003cbr\u003e\n• Allow to dry (2–3 hours in thin 2–3mm applications, depending on\u003cbr\u003e\ntemperature and humidity) before sanding and painting. Allow longer drying times (24 hours minimum) if painting with oil based  paints, for deeper applications or in colder weather.\u003cbr\u003e\n• For deeper jobs apply in 10mm layers, allowing each layer to dry before\u003cbr\u003e\napplying the rest.\u003cbr\u003e\n• Protect from rain until dry. If required, paint with a quality exterior coating.\u003cbr\u003e\n• For a render texture smooth out with trowel or filling blade when applying the product and do not sand. For a smoother texture sand surface after drying.\u003cbr\u003e\n• For best results, apply undercoat before applying water or oil based top coat.\u003cbr\u003e\n• Where joint movement occurs, use a flexible Poly sealant.\u003cbr\u003e\n• Clean up with water before filler dries.\u003c\/p\u003e\n","brand":"Poly","offers":[{"title":"Default Title","offer_id":52323824107886,"sku":"GA9311531002465","price":83.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/files\/9311531002465_75e3155d-19b8-4086-a6f4-acfc1dd4ef06.png?v=1754712191"},{"product_id":"polyfilla-exterior-masonry-filler-x-500g","title":"Polyfilla Exterior Masonry Filler x 500g","description":"\u003cp\u003eA ready-mixed filler that dries hard to a durable finish for deep and wide cracks in mortar, concrete, cement render and brick.\u003c\/p\u003e\n\n\u003cp\u003eWater, weather, UV, algae and mould resistant\u003c\/p\u003e\n\n\u003cp\u003eCan be tooled to a render texture or sanded to a smooth finish.\u003c\/p\u003e\n\n\u003cp\u003eFor use on: Bricks, concrete, bare or painted cement render \u0026amp; other masonry surfaces (EXTERIOR \u0026amp; INTERIOR)\u003cbr\u003e\nFill depth: Up to 10mm\u003cbr\u003e\nDries in: 3 hours\u003cbr\u003e\nReady to use: YES\u003cbr\u003e\nAvailable in: 500g and 2.2kg\u003cbr\u003e\nColour: Cement grey in colour but can be painted over with both oil and water based paints\u003c\/p\u003e\n\n\u003cp\u003e• Ensure surfaces are clean and free from dust, grease, mould\/algae and  flaking\/powdery paint or material. If necessary wash with Poly Sugar Soap.\u003cbr\u003e\n• Rinse thoroughly and allow surface to dry.\u003cbr\u003e\n• Use flexible filling blade to press filler into hole, or trowel to spread a thin\u003cbr\u003e\nlayer over surface, and tool to a feathered edge.\u003cbr\u003e\n• Allow to dry (2–3 hours in thin 2–3mm applications, depending on\u003cbr\u003e\ntemperature and humidity) before sanding and painting. Allow longer drying times (24 hours minimum) if painting with oil based  paints, for deeper applications or in colder weather.\u003cbr\u003e\n• For deeper jobs apply in 10mm layers, allowing each layer to dry before\u003cbr\u003e\napplying the rest.\u003cbr\u003e\n• Protect from rain until dry. If required, paint with a quality exterior coating.\u003cbr\u003e\n• For a render texture smooth out with trowel or filling blade when applying the product and do not sand. For a smoother texture sand surface after drying.\u003cbr\u003e\n• For best results, apply undercoat before applying water or oil based top coat.\u003cbr\u003e\n• Where joint movement occurs, use a flexible Poly sealant.\u003cbr\u003e\n• Clean up with water before filler dries.\u003c\/p\u003e\n","brand":"Poly","offers":[{"title":"Default Title","offer_id":52323824140654,"sku":"GA9311531002205","price":22.91,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/files\/9311531002205_420b875e-2fa9-40fd-ace1-98f2b1046a5c.jpg?v=1754712189"},{"product_id":"polyfilla-rapid-30-100g-your-go-to-quick-set-filler-for-interior-and-exterior-surfaces","title":"Polyfilla Rapid 30 100g: Your Go-To Quick-Set Filler for Interior and Exterior Surfaces","description":"\u003ctitle\u003e\u003c\/title\u003e\n\u003ch1\u003ePolyfilla Rapid 30 100g: Your Go-To Quick-Set Filler for Interior and Exterior Surfaces\u003c\/h1\u003e\n\n\u003ch2\u003eQuick, Reliable, and Versatile Filler for All Surface Types\u003c\/h2\u003e\n\n\u003cp\u003eIf speed is of the essence, \u003cstrong\u003ePolyfilla Rapid 30 100g\u003c\/strong\u003e is your ultimate choice for a high-quality plasterboard filler. Fill cracks, gaps, dents, and holes effortlessly in both interior and exterior surfaces.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features:\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003eExtremely easy to sand\u003c\/li\u003e\n\u003cli\u003eSets to a hard finish\u003c\/li\u003e\n\u003cli\u003eHighly crack-resistant\u003c\/li\u003e\n\u003cli\u003eFills up to 50mm deep holes\u003c\/li\u003e\n\u003cli\u003eDries in as fast as 30 minutes*\u003c\/li\u003e\n\u003cli\u003eSuitable for multiple surfaces: plasterboard, brick, timber, and concrete\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow to Use:\u003c\/h3\u003e\n\n\u003col\u003e\n\u003cli\u003eClean and dry the surface, ensuring no loose or powdery material.\u003c\/li\u003e\n\u003cli\u003ePress the filler firmly into dents and holes, feathering edges to minimize sanding.\u003c\/li\u003e\n\u003cli\u003eAllow 30-60 minutes drying time for thin applications, longer for oil-based paints and deeper applications.\u003c\/li\u003e\n\u003cli\u003eFor the smoothest finish, top with Poly Small Cracks and apply a paint undercoat before the final top coat.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch3\u003eLimitations \u0026amp; Tips:\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003eUse Poly Gap filler where joint movement occurs.\u003c\/li\u003e\n\u003cli\u003eDo not fill more than 50mm deep.\u003c\/li\u003e\n\u003cli\u003eClean up with water before the filler dries.\u003c\/li\u003e\n\u003cli\u003eFor quick paint-over solutions, consider using Poly Quick Dry.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e*Drying time is based on a 2mm application.\u003c\/p\u003e\n\n\u003cp\u003eWith \u003cstrong\u003ePolyfilla Rapid 30 100g\u003c\/strong\u003e, you are not just buying a filler; you are investing in speed, quality, and versatility for your home improvement projects.\u003c\/p\u003e\n","brand":"Poly","offers":[{"title":"Default Title","offer_id":52323824566638,"sku":"GA9311531002014","price":12.35,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/files\/9311531002014_38d9b33c-5c1b-4f0c-b83e-6ad0b767ef1e.png?v=1754712169"},{"product_id":"polyfilla-rapid-30-140g-your-go-to-quick-set-filler-for-interior-and-exterior-surfaces","title":"Polyfilla Rapid 30 140g: Your Go-To Quick-Set Filler for Interior and Exterior Surfaces","description":"\u003ctitle\u003e\u003c\/title\u003e\n\u003ch1\u003ePolyfilla Rapid 30 140g: Your Go-To Quick-Set Filler for Interior and Exterior Surfaces\u003c\/h1\u003e\n\n\u003ch2\u003eQuick, Reliable, and Versatile Filler for All Surface Types\u003c\/h2\u003e\n\n\u003cp\u003eIf speed is of the essence, \u003cstrong\u003ePolyfilla Rapid 30 140g\u003c\/strong\u003e is your ultimate choice for a high-quality plasterboard filler. Fill cracks, gaps, dents, and holes effortlessly in both interior and exterior surfaces.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features:\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003eExtremely easy to sand\u003c\/li\u003e\n\u003cli\u003eSets to a hard finish\u003c\/li\u003e\n\u003cli\u003eHighly crack-resistant\u003c\/li\u003e\n\u003cli\u003eFills up to 50mm deep holes\u003c\/li\u003e\n\u003cli\u003eDries in as fast as 30 minutes*\u003c\/li\u003e\n\u003cli\u003eSuitable for multiple surfaces: plasterboard, brick, timber, and concrete\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow to Use:\u003c\/h3\u003e\n\n\u003col\u003e\n\u003cli\u003eClean and dry the surface, ensuring no loose or powdery material.\u003c\/li\u003e\n\u003cli\u003ePress the filler firmly into dents and holes, feathering edges to minimize sanding.\u003c\/li\u003e\n\u003cli\u003eAllow 30-60 minutes drying time for thin applications, longer for oil-based paints and deeper applications.\u003c\/li\u003e\n\u003cli\u003eFor the smoothest finish, top with Poly Small Cracks and apply a paint undercoat before the final top coat.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch3\u003eLimitations \u0026amp; Tips:\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003eUse Poly Gap filler where joint movement occurs.\u003c\/li\u003e\n\u003cli\u003eDo not fill more than 50mm deep.\u003c\/li\u003e\n\u003cli\u003eClean up with water before the filler dries.\u003c\/li\u003e\n\u003cli\u003eFor quick paint-over solutions, consider using Poly Quick Dry.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e*Drying time is based on a 2mm application.\u003c\/p\u003e\n\n\u003cp\u003eWith \u003cstrong\u003ePolyfilla Rapid 30 140g\u003c\/strong\u003e, you are not just buying a filler; you are investing in speed, quality, and versatility for your home improvement projects.\u003c\/p\u003e\n","brand":"Poly","offers":[{"title":"Default Title","offer_id":52323824599406,"sku":"GA9311531002854","price":21.59,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/files\/9311531002854_9d4114d3-8113-48e8-8592-e0725a5c1ac8.png?v=1754712168"},{"product_id":"polyfilla-rapid-30-340g-your-go-to-quick-set-filler-for-interior-and-exterior-surfaces","title":"Polyfilla Rapid 30 340g Your Go-To Quick-Set Filler for Interior and Exterior Surfaces","description":"\u003ctitle\u003e\u003c\/title\u003e\n\u003ch1\u003ePolyfilla Rapid 30 340g: Your Go-To Quick-Set Filler for Interior and Exterior Surfaces\u003c\/h1\u003e\n\n\u003ch2\u003eQuick, Reliable, and Versatile Filler for All Surface Types\u003c\/h2\u003e\n\n\u003cp\u003eIf speed is of the essence, \u003cstrong\u003ePolyfilla Rapid 30 340g\u003c\/strong\u003e is your ultimate choice for a high-quality plasterboard filler. Fill cracks, gaps, dents, and holes effortlessly in both interior and exterior surfaces.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features:\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003eExtremely easy to sand\u003c\/li\u003e\n\u003cli\u003eSets to a hard finish\u003c\/li\u003e\n\u003cli\u003eHighly crack-resistant\u003c\/li\u003e\n\u003cli\u003eFills up to 50mm deep holes\u003c\/li\u003e\n\u003cli\u003eDries in as fast as 30 minutes*\u003c\/li\u003e\n\u003cli\u003eSuitable for multiple surfaces: plasterboard, brick, timber, and concrete\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow to Use:\u003c\/h3\u003e\n\n\u003col\u003e\n\u003cli\u003eClean and dry the surface, ensuring no loose or powdery material.\u003c\/li\u003e\n\u003cli\u003ePress the filler firmly into dents and holes, feathering edges to minimize sanding.\u003c\/li\u003e\n\u003cli\u003eAllow 30-60 minutes drying time for thin applications, longer for oil-based paints and deeper applications.\u003c\/li\u003e\n\u003cli\u003eFor the smoothest finish, top with Poly Small Cracks and apply a paint undercoat before the final top coat.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch3\u003eLimitations \u0026amp; Tips:\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003eUse Poly Gap filler where joint movement occurs.\u003c\/li\u003e\n\u003cli\u003eDo not fill more than 50mm deep.\u003c\/li\u003e\n\u003cli\u003eClean up with water before the filler dries.\u003c\/li\u003e\n\u003cli\u003eFor quick paint-over solutions, consider using Poly Quick Dry.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e*Drying time is based on a 2mm application.\u003c\/p\u003e\n\n\u003cp\u003eWith \u003cstrong\u003ePolyfilla Rapid 30 340g\u003c\/strong\u003e, you are not just buying a filler; you are investing in speed, quality, and versatility for your home improvement projects.\u003c\/p\u003e\n","brand":"Poly","offers":[{"title":"Default Title","offer_id":52323824632174,"sku":"GA9311531002861","price":36.88,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/files\/9311531002861_030541f8-6a5f-4d5b-ac13-1bf230e3a5b9.jpg?v=1754712166"},{"product_id":"prep-fx-exterior-super-base-coat-x-12kg","title":"Prep Fx Exterior Super Base Coat X 12Kg","description":"\u003cp\u003eFX Super Base Coat X is a revolutionary joint compound. It has remarkable flexibility, minimal shrinkage and extraordinary strength, outperforming current industry leaders’ compounds, both pre-mixed and dry products. * Its flexibility helps with remediation of hairline cracks due to minor structural movement. It is suitable for substrates such as fibre cement sheeting and Magnum Boards. FX Super Base Coat X is part 1 of a high-performance, integrated compound system. Developed by FX Australia and manufactured locally, the use of all products in the Compound System guarantees a time-saving, superior finish and greater strength for substrates.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures Benefits\u003c\/strong\u003e\u003cbr\u003e\nWater-based Ease of application\u003cbr\u003e\nStrong Easy spreading\u003cbr\u003e\nFlexible Time-saving\u003cbr\u003e\nWater-resistant Easy clean-up\u003cbr\u003e\nPre-mixed\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eUses\u003c\/strong\u003e\u003cbr\u003e\nFX Super Base Coat X is used for fixing fibre cement sheets and Magnum Board joints.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSurface Preparation\u003c\/strong\u003e\u003cbr\u003e\nAll surfaces must be thoroughly cleaned and free of dirt, dust and grease. Substrates need to be constructed or installed to industry\/Australian Standards.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eLoad FX Super Base Coat X onto hawke using a 150 mm – 200 mm broad knife\/trowel and place in to the joint recess, working steadily from one end to the other of the joint recess, ensuring the Compound fills the joint recess and is evenly and smoothly applied. Next embed fibre-fuse tape into the Compound. Scrape off any excess Compound. Note, for added strength and confidence load FX Super Base Coat X in to the joint recess over the fibrefuse tape, working steadily from one end to the other of the joint recess, ensuring the Compound fills the joint recess and is evenly and smoothly applied. Ensure force is applied to properly embed Compound and fibre-fuse tape into the recess. Allow first coat of FX  uper Base Coat X to dry for a minimum of 3–4 hours at 25 °C and 50% humidity. Apply a second coat of FX Super Base Coat X using the same method as the first coat. Ensure the  compound is flush with the sheets. Scrape off any excess Compound. Allow to dry for 3–4 hours at 25 °C and 50% humidity before proceeding to product 2, FX Topping Compound X, or proceed straight to water-proofing system or texture-coating system.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eImportant Note:\u003c\/strong\u003e Clean tools frequently with water and a sponge to stop Compound drying on tools.\u003cbr\u003e\nApproximate Spreading Rate: N\/A. Approximate Film Thickness per coat: Wet: 2000 Microns; Dry: 1500 Microns.\u003cbr\u003e\nRequires: 2 coats.\u003cbr\u003e\n\u003cbr\u003e\nMethod: Trowel or broad knife.\u003cbr\u003e\nDrying Times (at 25 °C and 50% humidity): Touch: 1Hour; Recoat: 3–4 Hours.\u003cbr\u003e\nNote: Do not apply product if the air temperature or substrate temperature is below 12.5 °C or above 35 °C.\u003cbr\u003e\nThe temperature should not fall below 10 °C during the drying process.\u003cbr\u003e\nClean-up: Water. Safety: Dust Mask\u003c\/p\u003e\n","brand":"Prep Productions","offers":[{"title":"Default Title","offer_id":52323825156462,"sku":"GA9352956000025","price":175.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/files\/9352956000025_a46a7e29-77d4-478d-bbe4-c2129776832e.jpg?v=1754712139"},{"product_id":"prep-fx-exterior-super-base-coat-x-1kg","title":"Prep Fx Exterior Super Base Coat X 1Kg","description":"\u003cp\u003eFX Super Base Coat X is a revolutionary joint compound. It has remarkable flexibility, minimal shrinkage and extraordinary strength, outperforming current industry leaders’ compounds, both pre-mixed and dry products. * Its flexibility helps with remediation of hairline cracks due to minor structural movement. It is suitable for substrates such as fibre cement sheeting and Magnum Boards. FX Super Base Coat X is part 1 of a high-performance, integrated compound system. Developed by FX Australia and manufactured locally, the use of all products in the Compound System guarantees a time-saving, superior finish and greater strength for substrates.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures Benefits\u003c\/strong\u003e\u003cbr\u003e\nWater-based Ease of application\u003cbr\u003e\nStrong Easy spreading\u003cbr\u003e\nFlexible Time-saving\u003cbr\u003e\nWater-resistant Easy clean-up\u003cbr\u003e\nPre-mixed\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eUses\u003c\/strong\u003e\u003cbr\u003e\nFX Super Base Coat X is used for fixing fibre cement sheets and Magnum Board joints.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSurface Preparation\u003c\/strong\u003e\u003cbr\u003e\nAll surfaces must be thoroughly cleaned and free of dirt, dust and grease. Substrates need to be constructed or installed to industry\/Australian Standards.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eLoad FX Super Base Coat X onto hawke using a 150 mm – 200 mm broad knife\/trowel and place in to the joint recess, working steadily from one end to the other of the joint recess, ensuring the Compound fills the joint recess and is evenly and smoothly applied. Next embed fibre-fuse tape into the Compound. Scrape off any excess Compound. Note, for added strength and confidence load FX Super Base Coat X in to the joint recess over the fibrefuse tape, working steadily from one end to the other of the joint recess, ensuring the Compound fills the joint recess and is evenly and smoothly applied. Ensure force is applied to properly embed Compound and fibre-fuse tape into the recess. Allow first coat of FX  uper Base Coat X to dry for a minimum of 3–4 hours at 25 °C and 50% humidity. Apply a second coat of FX Super Base Coat X using the same method as the first coat. Ensure the  compound is flush with the sheets. Scrape off any excess Compound. Allow to dry for 3–4 hours at 25 °C and 50% humidity before proceeding to product 2, FX Topping Compound X, or proceed straight to water-proofing system or texture-coating system.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eImportant Note:\u003c\/strong\u003e Clean tools frequently with water and a sponge to stop Compound drying on tools.\u003cbr\u003e\nApproximate Spreading Rate: N\/A. Approximate Film Thickness per coat: Wet: 2000 Microns; Dry: 1500 Microns.\u003cbr\u003e\nRequires: 2 coats.\u003cbr\u003e\n\u003cbr\u003e\nMethod: Trowel or broad knife.\u003cbr\u003e\nDrying Times (at 25 °C and 50% humidity): Touch: 1Hour; Recoat: 3–4 Hours.\u003cbr\u003e\nNote: Do not apply product if the air temperature or substrate temperature is below 12.5 °C or above 35 °C.\u003cbr\u003e\nThe temperature should not fall below 10 °C during the drying process.\u003cbr\u003e\nClean-up: Water. Safety: Dust Mask\u003c\/p\u003e\n","brand":"Prep Productions","offers":[{"title":"Default Title","offer_id":52323825189230,"sku":"GA9352956000001","price":9.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/files\/9352956000001_c5ff3759-a74c-4db5-a368-aa759b55d6df.jpg?v=1754712138"},{"product_id":"prep-fx-exterior-super-base-coat-x-5kg","title":"Prep Fx Exterior Super Base Coat X 5Kg","description":"\u003cp\u003eFX Super Base Coat X is a revolutionary joint compound. It has remarkable flexibility, minimal shrinkage and extraordinary strength, outperforming current industry leaders’ compounds, both pre-mixed and dry products. * Its flexibility helps with remediation of hairline cracks due to minor structural movement. It is suitable for substrates such as fibre cement sheeting and Magnum Boards. FX Super Base Coat X is part 1 of a high-performance, integrated compound system. Developed by FX Australia and manufactured locally, the use of all products in the Compound System guarantees a time-saving, superior finish and greater strength for substrates.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures Benefits\u003c\/strong\u003e\u003cbr\u003e\nWater-based Ease of application\u003cbr\u003e\nStrong Easy spreading\u003cbr\u003e\nFlexible Time-saving\u003cbr\u003e\nWater-resistant Easy clean-up\u003cbr\u003e\nPre-mixed\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eUses\u003c\/strong\u003e\u003cbr\u003e\nFX Super Base Coat X is used for fixing fibre cement sheets and Magnum Board joints.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSurface Preparation\u003c\/strong\u003e\u003cbr\u003e\nAll surfaces must be thoroughly cleaned and free of dirt, dust and grease. Substrates need to be constructed or installed to industry\/Australian Standards.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eLoad FX Super Base Coat X onto hawke using a 150 mm – 200 mm broad knife\/trowel and place in to the joint recess, working steadily from one end to the other of the joint recess, ensuring the Compound fills the joint recess and is evenly and smoothly applied. Next embed fibre-fuse tape into the Compound. Scrape off any excess Compound. Note, for added strength and confidence load FX Super Base Coat X in to the joint recess over the fibrefuse tape, working steadily from one end to the other of the joint recess, ensuring the Compound fills the joint recess and is evenly and smoothly applied. Ensure force is applied to properly embed Compound and fibre-fuse tape into the recess. Allow first coat of FX  uper Base Coat X to dry for a minimum of 3–4 hours at 25 °C and 50% humidity. Apply a second coat of FX Super Base Coat X using the same method as the first coat. Ensure the  compound is flush with the sheets. Scrape off any excess Compound. Allow to dry for 3–4 hours at 25 °C and 50% humidity before proceeding to product 2, FX Topping Compound X, or proceed straight to water-proofing system or texture-coating system.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eImportant Note:\u003c\/strong\u003e Clean tools frequently with water and a sponge to stop Compound drying on tools.\u003cbr\u003e\nApproximate Spreading Rate: N\/A. Approximate Film Thickness per coat: Wet: 2000 Microns; Dry: 1500 Microns.\u003cbr\u003e\nRequires: 2 coats.\u003cbr\u003e\n\u003cbr\u003e\nMethod: Trowel or broad knife.\u003cbr\u003e\nDrying Times (at 25 °C and 50% humidity): Touch: 1Hour; Recoat: 3–4 Hours.\u003cbr\u003e\nNote: Do not apply product if the air temperature or substrate temperature is below 12.5 °C or above 35 °C.\u003cbr\u003e\nThe temperature should not fall below 10 °C during the drying process.\u003cbr\u003e\nClean-up: Water. Safety: Dust Mask\u003c\/p\u003e\n","brand":"Prep Productions","offers":[{"title":"Default Title","offer_id":52323825221998,"sku":"GA9352956000018","price":25.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/files\/9352956000018_f47dcf65-561c-4764-91e8-ae060ce529dc.jpg?v=1754712136"},{"product_id":"prep-multi-purpose-filler-interior-exterior-1kg","title":"Prep Multi-Purpose Filler Interior \u0026 Exterior 1Kg","description":"\u003cp\u003eA ready-mixed heavy duty bonded filler for filling holes internally and externally. PREP Multi-Purpose Filler can be used to fill holes in concrete, cement, brickwork, timber and plasterboard, as well as many other porous substrates.\u003c\/p\u003e\n\n\u003cp\u003eEasy to use\u003cbr\u003e\nCan be tinted\u003cbr\u003e\nReady-mixed\u003cbr\u003e\nInterior \u0026amp; exterior\u003cbr\u003e\nEnvironmentally friendly\u003cbr\u003e\nHeavy-duty bonded filler\u003cbr\u003e\nIdeal for floors, walls, ceilings, roofs\u003c\/p\u003e\n","brand":"Prep Productions","offers":[{"title":"Default Title","offer_id":52323826106734,"sku":"GA9314261008882","price":17.04,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/files\/9314261008882_26138022-889f-4941-a013-de33799ffd3a.jpg?v=1754712087"},{"product_id":"prep-multi-purpose-filler-interior-exterior-500g","title":"Prep Multi-Purpose Filler Interior \u0026 Exterior 500g","description":"\u003cp\u003eA ready-mixed heavy duty bonded filler for filling holes internally and externally. PREP Multi-Purpose Filler can be used to fill holes in concrete, cement, brickwork, timber and plasterboard, as well as many other porous substrates.\u003c\/p\u003e\n\n\u003cp\u003eEasy to use\u003cbr\u003e\nCan be tinted\u003cbr\u003e\nReady-mixed\u003cbr\u003e\nInterior \u0026amp; exterior\u003cbr\u003e\nEnvironmentally friendly\u003cbr\u003e\nHeavy-duty bonded filler\u003cbr\u003e\nIdeal for floors, walls, ceilings, roofs\u003c\/p\u003e\n","brand":"Prep Productions","offers":[{"title":"Default Title","offer_id":52323826139502,"sku":"GA9314261008875","price":9.25,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/files\/9314261008875_c721a4a8-b634-4dca-a2df-a38cf0036de9.jpg?v=1754712085"},{"product_id":"prep-multi-purpose-interior-exterior-filler-10kg","title":"Prep Multi-Purpose Interior \u0026 Exterior Filler 10Kg","description":"\u003cp\u003eA ready-mixed heavy duty bonded filler for filling holes internally and externally. PREP Multi-Purpose Filler can be used to fill holes in concrete, cement, brickwork, timber and plasterboard, as well as many other porous substrates.\u003c\/p\u003e\n\n\u003cp\u003eEasy to use\u003cbr\u003e\nCan be tinted\u003cbr\u003e\nReady-mixed\u003cbr\u003e\nInterior \u0026amp; exterior\u003cbr\u003e\nEnvironmentally friendly\u003cbr\u003e\nHeavy-duty bonded filler\u003cbr\u003e\nIdeal for floors, walls, ceilings, roofs\u003c\/p\u003e\n","brand":"Prep Productions","offers":[{"title":"Default Title","offer_id":52323826172270,"sku":"GA9314261009247","price":135.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/files\/9314261009247_880e355b-5040-4ee4-a22d-6bf85704b36b.png?v=1754712081"},{"product_id":"prep-multi-purpose-interior-exterior-filler-200g","title":"Prep Multi-Purpose Interior \u0026 Exterior Filler 200g","description":"\u003cp\u003eA ready-mixed heavy duty bonded filler for filling holes internally and externally. PREP Multi-Purpose Filler can be used to fill holes in concrete, cement, brickwork, timber and plasterboard, as well as many other porous substrates.\u003c\/p\u003e\n\n\u003cp\u003eEasy to use\u003cbr\u003e\nCan be tinted\u003cbr\u003e\nReady-mixed\u003cbr\u003e\nInterior \u0026amp; exterior\u003cbr\u003e\nEnvironmentally friendly\u003cbr\u003e\nHeavy-duty bonded filler\u003cbr\u003e\nIdeal for floors, walls, ceilings, roofs\u003c\/p\u003e\n","brand":"Prep Productions","offers":[{"title":"Default Title","offer_id":52323826205038,"sku":"GA9314261008868","price":6.07,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/files\/9314261008868_97052dc2-5f22-4b50-84e0-2cb9fdcba5bc.png?v=1754712079"},{"product_id":"prep-multi-purpose-interior-exterior-filler-2kg","title":"Prep Multi-Purpose Interior \u0026 Exterior Filler 2Kg","description":"\u003cp\u003eA ready-mixed heavy duty bonded filler for filling holes internally and externally. PREP Multi-Purpose Filler can be used to fill holes in concrete, cement, brickwork, timber and plasterboard, as well as many other porous substrates.\u003c\/p\u003e\n\n\u003cp\u003eEasy to use\u003cbr\u003e\nCan be tinted\u003cbr\u003e\nReady-mixed\u003cbr\u003e\nInterior \u0026amp; exterior\u003cbr\u003e\nEnvironmentally friendly\u003cbr\u003e\nHeavy-duty bonded filler\u003cbr\u003e\nIdeal for floors, walls, ceilings, roofs\u003c\/p\u003e\n","brand":"Prep Productions","offers":[{"title":"Default Title","offer_id":52323826237806,"sku":"GA9314261008899","price":33.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/files\/9314261008899_fa0f0cfa-eb22-434d-aa7f-e6fad8a8a1aa.png?v=1754712076"},{"product_id":"prep-multi-purpose-interior-exterior-filler-4kg","title":"Prep Multi-Purpose Interior \u0026 Exterior Filler 4Kg","description":"\u003cp\u003eA ready-mixed heavy duty bonded filler for filling holes internally and externally. PREP Multi-Purpose Filler can be used to fill holes in concrete, cement, brickwork, timber and plasterboard, as well as many other porous substrates.\u003c\/p\u003e\n\n\u003cp\u003eEasy to use\u003cbr\u003e\nCan be tinted\u003cbr\u003e\nReady-mixed\u003cbr\u003e\nInterior \u0026amp; exterior\u003cbr\u003e\nEnvironmentally friendly\u003cbr\u003e\nHeavy-duty bonded filler\u003cbr\u003e\nIdeal for floors, walls, ceilings, roofs\u003c\/p\u003e\n","brand":"Prep Productions","offers":[{"title":"Default Title","offer_id":52323826270574,"sku":"GA9314261008912","price":71.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/files\/9314261008912_ada5f58a-a82e-4ba8-aa62-850239b078b5.png?v=1754712074"},{"product_id":"prep-plaster-of-paris-for-sculpting-casting-easy-to-shape-dries-white-10kg","title":"Prep Plaster Of Paris For Sculpting Casting Easy to Shape Dries White 10Kg","description":"\u003cp\u003eIdeal for craft, PREP Plaster of Paris can be used for sculpting, casting, and many other applications.\u003c\/p\u003e\n\n\u003cp\u003eOnce set, it can be sanded, drilled, and chiseled to the required shape and size, then painted and kiln-dried.\u003c\/p\u003e\n\n\u003cp\u003eEnvironmentally friendly\u003cbr\u003e\nDries white\u003cbr\u003e\nDries fast\u003cbr\u003e\nVery high weather resistance\u003cbr\u003e\nUnique properties make this product easy to shape and sand\u003cbr\u003e\nIdeal for schools and craft classes or just having fun!\u003c\/p\u003e\n","brand":"Prep Productions","offers":[{"title":"Default Title","offer_id":52323826794862,"sku":"GA9314261120485","price":39.15,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/files\/9314261120485_7d74b6b0-ca4e-4ec5-87d9-2b796b0fe2df.jpg?v=1754712045"},{"product_id":"prep-plaster-of-paris-for-sculpting-casting-easy-to-shape-dries-white-1kg","title":"Prep Plaster Of Paris For Sculpting Casting Easy to Shape Dries White 1Kg","description":"\u003cp\u003eIdeal for craft, PREP Plaster of Paris can be used for sculpting, casting, and many other applications.\u003c\/p\u003e\n\n\u003cp\u003eOnce set, it can be sanded, drilled, and chiseled to the required shape and size, then painted and kiln-dried.\u003c\/p\u003e\n\n\u003cp\u003eEnvironmentally friendly\u003cbr\u003e\nDries white\u003cbr\u003e\nDries fast\u003cbr\u003e\nVery high weather resistance\u003cbr\u003e\nUnique properties make this product easy to shape and sand\u003cbr\u003e\nIdeal for schools and craft classes or just having fun!\u003c\/p\u003e\n","brand":"Prep Productions","offers":[{"title":"Default Title","offer_id":52323826827630,"sku":"GA9314261120461","price":9.35,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/files\/9314261120461_9180d583-cbfa-49ea-b2f3-59b04c5115a3.jpg?v=1754712043"},{"product_id":"prep-plaster-of-paris-for-sculpting-casting-easy-to-shape-dries-white-3kg","title":"Prep Plaster Of Paris For Sculpting Casting Easy to Shape Dries White 3Kg","description":"\u003cp\u003eIdeal for craft, PREP Plaster of Paris can be used for sculpting, casting, and many other applications.\u003c\/p\u003e\n\n\u003cp\u003eOnce set, it can be sanded, drilled, and chiseled to the required shape and size, then painted and kiln-dried.\u003c\/p\u003e\n\n\u003cp\u003eEnvironmentally friendly\u003cbr\u003e\nDries white\u003cbr\u003e\nDries fast\u003cbr\u003e\nVery high weather resistance\u003cbr\u003e\nUnique properties make this product easy to shape and sand\u003cbr\u003e\nIdeal for schools and craft classes or just having fun!\u003c\/p\u003e\n","brand":"Prep Productions","offers":[{"title":"Default Title","offer_id":52323826860398,"sku":"GA9314261120478","price":16.5,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/files\/9314261120478_d1496b55-59c2-4bb7-a5e3-0c55d5b5d374.jpg?v=1754712041"},{"product_id":"quickset-watercrete-multi-purpose-patching-cement-sets-underwater-10kg","title":"Quickset Watercrete Multi Purpose Patching Cement Sets Underwater 10Kg","description":"\u003cp\u003eQuickset WATERCRETE\u003cbr\u003e\nIs a unique product that provides a simple, fast, concrete solution to a multitude of awkward repair problems large and small…from re-forming\u003cbr\u003e\ngrating ledges to repairing the Owen Falls Dam in Uganda.\u003c\/p\u003e\n\n\u003cp\u003eQuickset WATERCRETE is a multi purpose patching cement that sets in five minutes …even underwater! Bonds to concrete, masonry, wood, steel and glass fibre.\u003c\/p\u003e\n\n\u003cp\u003eQuickset WATERCRETE is an all purpose patching and bonding compound which is very effective where the presence of water makes repairing and sealing difficult. It will repair leaks in pools, tanks and bonds earth ware pipes and tiles, without the need to drain the water. It is ideal for repairs in wet or dry situations where delays are inconvenient as it can be walked on, or driven over in 30 minutes.\u003c\/p\u003e\n\n\u003cp\u003eQuickset WATERCRETE is a fast setting, high compressive strength compound that shows its initial set in 4-6 minutes, even underwater. It reaches maximum compressive strength in 24 hours and bonds to CLEAN CONCRETE, MASONRY, STONE, TIMBER and STEEL. Contains no calcium chloride. It is suitable for use with drinking water.\u003c\/p\u003e\n\n\u003cp\u003e\u003cbr\u003e\n\u003cstrong\u003eBRIEF TECHNICAL SPECIFICATIONS\u003c\/strong\u003e\u003cbr\u003e\n Initial set 5 minutes. Curing set 15-30 minutes.\u003cbr\u003e\n Compressive strength of 2,000psi or greater in 24 hours\u003cbr\u003e\n Maximum strength in 28 days\u003cbr\u003e\n Non-toxic\u003cbr\u003e\n Volume change: Expansion after 24 hours 0.1%\u003cbr\u003e\n Contraction after 28 days 0.01%\u003cbr\u003e\n Water absorption 1.7% after 14 days\u003cbr\u003e\n Factory Production to BS 5750 Part II\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eBONDS TO:\u003c\/strong\u003e\u003cbr\u003e\n CEMENT\u003cbr\u003e\n TIMBER\u003cbr\u003e\n MASONRY\u003cbr\u003e\n FIBREGLASS\u003cbr\u003e\n STEEL\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eINSTRUCTIONS FOR USE\u003c\/strong\u003e\u003cbr\u003e\nRemove all loose material from the area to be treated to ensure a solid bond. Slowly add one part of water to 4 parts Quickset WATERCRETE and mix for 1 to 2 minutes to the CONSISTENCY OF PUTTY. Add more product if mix is too wet as wet mix seriously reduces effectiveness. Avoid contact with skin. Press the mix firmly into the prepared area. The product can be moulded to shape. When filling a hole against running water, hold the mixed product in position with a trowel or piece of timber until it cures. The product hardens rapidly after 4 minutes. If sealing a leak underwater, increase the size of the hole on the surface to create a taper. Before applying Quickset WATERCRETE to dry work, generously soak the location with water. Damp conditions assist curing. For repairs less than 1.5cms thick in a dry situation, it is best kept damp for 24 hours.\u003c\/p\u003e\n","brand":"Prep Productions","offers":[{"title":"Default Title","offer_id":52323827024238,"sku":"GA9314261001807","price":165.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/files\/9314261001807_eb49062e-db15-424c-beac-e368b9288624.jpg?v=1754712033"},{"product_id":"quickset-watercrete-multi-purpose-patching-cement-sets-underwater-4-5kg","title":"Quickset Watercrete Multi Purpose Patching Cement Sets Underwater 4.5Kg","description":"\u003cp\u003eQuickset WATERCRETE\u003cbr\u003e\nIs a unique product that provides a simple, fast, concrete solution to a multitude of awkward repair problems large and small…from re-forming\u003cbr\u003e\ngrating ledges to repairing the Owen Falls Dam in Uganda.\u003c\/p\u003e\n\n\u003cp\u003eQuickset WATERCRETE is a multi purpose patching cement that sets in five minutes …even underwater! Bonds to concrete, masonry, wood, steel and glass fibre.\u003c\/p\u003e\n\n\u003cp\u003eQuickset WATERCRETE is an all purpose patching and bonding compound which is very effective where the presence of water makes repairing and sealing difficult. It will repair leaks in pools, tanks and bonds earth ware pipes and tiles, without the need to drain the water. It is ideal for repairs in wet or dry situations where delays are inconvenient as it can be walked on, or driven over in 30 minutes.\u003c\/p\u003e\n\n\u003cp\u003eQuickset WATERCRETE is a fast setting, high compressive strength compound that shows its initial set in 4-6 minutes, even underwater. It reaches maximum compressive strength in 24 hours and bonds to CLEAN CONCRETE, MASONRY, STONE, TIMBER and STEEL. Contains no calcium chloride. It is suitable for use with drinking water.\u003c\/p\u003e\n\n\u003cp\u003e\u003cbr\u003e\n\u003cstrong\u003eBRIEF TECHNICAL SPECIFICATIONS\u003c\/strong\u003e\u003cbr\u003e\n Initial set 5 minutes. Curing set 15-30 minutes.\u003cbr\u003e\n Compressive strength of 2,000psi or greater in 24 hours\u003cbr\u003e\n Maximum strength in 28 days\u003cbr\u003e\n Non-toxic\u003cbr\u003e\n Volume change: Expansion after 24 hours 0.1%\u003cbr\u003e\n Contraction after 28 days 0.01%\u003cbr\u003e\n Water absorption 1.7% after 14 days\u003cbr\u003e\n Factory Production to BS 5750 Part II\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eBONDS TO:\u003c\/strong\u003e\u003cbr\u003e\n CEMENT\u003cbr\u003e\n TIMBER\u003cbr\u003e\n MASONRY\u003cbr\u003e\n FIBREGLASS\u003cbr\u003e\n STEEL\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eINSTRUCTIONS FOR USE\u003c\/strong\u003e\u003cbr\u003e\nRemove all loose material from the area to be treated to ensure a solid bond. Slowly add one part of water to 4 parts Quickset WATERCRETE and mix for 1 to 2 minutes to the CONSISTENCY OF PUTTY. Add more product if mix is too wet as wet mix seriously reduces effectiveness. Avoid contact with skin. Press the mix firmly into the prepared area. The product can be moulded to shape. When filling a hole against running water, hold the mixed product in position with a trowel or piece of timber until it cures. The product hardens rapidly after 4 minutes. If sealing a leak underwater, increase the size of the hole on the surface to create a taper. Before applying Quickset WATERCRETE to dry work, generously soak the location with water. Damp conditions assist curing. For repairs less than 1.5cms thick in a dry situation, it is best kept damp for 24 hours.\u003c\/p\u003e\n","brand":"Prep Productions","offers":[{"title":"Default Title","offer_id":52323827057006,"sku":"GA9314261001029","price":101.37,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/files\/9314261001029_6cfdf494-29f7-4e33-856d-4743ad575f22.jpg?v=1754712031"},{"product_id":"quickset-watercrete-multi-purpose-patching-cement-sets-underwater-750g","title":"Quickset Watercrete Multi Purpose Patching Cement Sets Underwater 750g","description":"\u003cp\u003eQuickset WATERCRETE\u003cbr\u003e\nIs a unique product that provides a simple, fast, concrete solution to a multitude of awkward repair problems large and small…from re-forming\u003cbr\u003e\ngrating ledges to repairing the Owen Falls Dam in Uganda.\u003c\/p\u003e\n\n\u003cp\u003eQuickset WATERCRETE is a multi purpose patching cement that sets in five minutes …even underwater! Bonds to concrete, masonry, wood, steel and glass fibre.\u003c\/p\u003e\n\n\u003cp\u003eQuickset WATERCRETE is an all purpose patching and bonding compound which is very effective where the presence of water makes repairing and sealing difficult. It will repair leaks in pools, tanks and bonds earth ware pipes and tiles, without the need to drain the water. It is ideal for repairs in wet or dry situations where delays are inconvenient as it can be walked on, or driven over in 30 minutes.\u003c\/p\u003e\n\n\u003cp\u003eQuickset WATERCRETE is a fast setting, high compressive strength compound that shows its initial set in 4-6 minutes, even underwater. It reaches maximum compressive strength in 24 hours and bonds to CLEAN CONCRETE, MASONRY, STONE, TIMBER and STEEL. Contains no calcium chloride. It is suitable for use with drinking water.\u003c\/p\u003e\n\n\u003cp\u003e\u003cbr\u003e\n\u003cstrong\u003eBRIEF TECHNICAL SPECIFICATIONS\u003c\/strong\u003e\u003cbr\u003e\n Initial set 5 minutes. Curing set 15-30 minutes.\u003cbr\u003e\n Compressive strength of 2,000psi or greater in 24 hours\u003cbr\u003e\n Maximum strength in 28 days\u003cbr\u003e\n Non-toxic\u003cbr\u003e\n Volume change: Expansion after 24 hours 0.1%\u003cbr\u003e\n Contraction after 28 days 0.01%\u003cbr\u003e\n Water absorption 1.7% after 14 days\u003cbr\u003e\n Factory Production to BS 5750 Part II\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eBONDS TO:\u003c\/strong\u003e\u003cbr\u003e\n CEMENT\u003cbr\u003e\n TIMBER\u003cbr\u003e\n MASONRY\u003cbr\u003e\n FIBREGLASS\u003cbr\u003e\n STEEL\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eINSTRUCTIONS FOR USE\u003c\/strong\u003e\u003cbr\u003e\nRemove all loose material from the area to be treated to ensure a solid bond. Slowly add one part of water to 4 parts Quickset WATERCRETE and mix for 1 to 2 minutes to the CONSISTENCY OF PUTTY. Add more product if mix is too wet as wet mix seriously reduces effectiveness. Avoid contact with skin. Press the mix firmly into the prepared area. The product can be moulded to shape. When filling a hole against running water, hold the mixed product in position with a trowel or piece of timber until it cures. The product hardens rapidly after 4 minutes. If sealing a leak underwater, increase the size of the hole on the surface to create a taper. Before applying Quickset WATERCRETE to dry work, generously soak the location with water. Damp conditions assist curing. For repairs less than 1.5cms thick in a dry situation, it is best kept damp for 24 hours.\u003c\/p\u003e\n","brand":"Prep Productions","offers":[{"title":"Default Title","offer_id":52323827089774,"sku":"GA9314261001012","price":25.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/files\/9314261001012_47a5ecbe-aaa5-45be-a9d4-70ef4c5b2589.jpg?v=1754712029"},{"product_id":"selleys-fireproof-heat-resistant-cement-white-x-850g","title":"Selleys Fireproof Heat Resistant Cement White x 850g","description":"\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e\nResists intense heat\u003cbr\u003e\nSets hard\u003cbr\u003e\nWater clean up\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhere can this product be used?\u003c\/strong\u003e\u003cbr\u003e\nRepairing bricks in fireplaces and chimneys\u003cbr\u003e\nSealing flues in pot-belly stoves\u003cbr\u003e\nFilling cracks in ironworks and bricks \u003cbr\u003e\nWhat materials is this product suitable for?\u003cbr\u003e\nBrick\u003cbr\u003e\nMetal\u003cbr\u003e\nConcrete\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eHow to Use:\u003c\/strong\u003e\u003cbr\u003e\nRemove all dust, grease and loose debris before applying material.\u003cbr\u003e\nDampen the cavities on porous surfaces for better adhesion.\u003cbr\u003e\nApply Fireproof Cement firmly into holes and cracks with a damp knife or spatula.\u003cbr\u003e\nAllow Fireproof Cement to dry a minimum of 48 hours before exposure to heat.\u003cbr\u003e\nIf Fireproof Cement is stiff slacken with a little water.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eLimitations:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eFireproof Cement is not an adhesive - it is a filling compound.\u003cbr\u003e\nNot recommended for external use e.g. BBQ's, incinerators etc.\u003cbr\u003e\nFireproof Cement is not suitable for use in kilns.\u003cbr\u003e\nFireproof Cement is not recommended for moving joints such as expansion joints as it sets rigidly\u003cbr\u003e\nHardened material cannot be resoftened with water.\u003c\/p\u003e\n","brand":"Selleys","offers":[{"title":"Default Title","offer_id":52323829514606,"sku":"GA9300697118813","price":48.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/files\/77d93440b6ed490bb27bbb0dbfb686c8.jpg?v=1757753253"},{"product_id":"selleys-spakfilla-heavy-duty-for-large-cracks-int-ext-435g","title":"Selleys Spakfilla Heavy Duty For Large Cracks Int \u0026 Ext 435g","description":"\u003cp\u003eSelleys Spakfilla Heavy Duty is a multi-purpose, tough and durable, light grey ready-mixed filler. \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e\nSuitable for interior and exterior applications\u003cbr\u003e\nGood adhesions to most surfaces\u003cbr\u003e\nWater and weather resistant\u003cbr\u003e\nFill cracks and holes in a single application\u003cbr\u003e\nPre-mixed and ready to use\u003cbr\u003e\nMinimal shrinkage so no need to overfill\u003cbr\u003e\nVery fast drying allowing sanding and painting in a short time period\u003cbr\u003e\nComes complete with a filling spatula for ease of use\u003cbr\u003e\nWater-based, so can be cleaned up with water\u003cbr\u003e\nPaintable with oil and water-based paints\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhere can this product be used?\u003c\/strong\u003e\u003cbr\u003e\nFilling holes, dents, cracks or chips in interior and exterior applications where no structural movement occurs \u003cbr\u003e\n \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat materials is this product suitable for?\u003c\/strong\u003e\u003cbr\u003e\nMortar\u003cbr\u003e\nMasonry\u003cbr\u003e\nConcrete\u003cbr\u003e\nWood\u003cbr\u003e\nStone\u003cbr\u003e\nPrimed metal surfaces\u003cbr\u003e\nBrick\u003cbr\u003e\nPlaster\u003c\/p\u003e\n\n\u003cp\u003eEnsure surfaces are clean, dry and free of loose material. Using the flexible spatula provided on the lid, press the filler firmly into the crack or hole and smooth off surface; there is no need to overfill. For deeper cracks, apply in 6mm layers allowing each layer to dry before applying the next.\u003cbr\u003e\nLightly sand back any excess filler from the surface after product dries (2-3 hours for 2mm applications).\u003cbr\u003e\nDust off any loose dust before applying undercoat and painting with water-based paints or oil-based paints. \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eLimitations:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eProduct is not flexible so not suitable for use between surfaces that are subject to the structural movement - use Selleys No More Gaps.\u003cbr\u003e\nAvoid using below 5°C or in wet conditions.\u003c\/p\u003e\n\n\u003cp\u003ePainting with oil-based paints is not recommended until 24 hours after the filler has been applied.\u003cbr\u003e\nWater-based paints may be used immediately after the filler has set.\u003cbr\u003e\nIf the filler is found to have stiffened prior to use, stir product. The product that has actually hardened should be discarded. If still too dry add one teaspoon of water and stir again to desired consistency.\u003c\/p\u003e\n\n\u003cp\u003eApplication tools may be cleaned with water.\u003cbr\u003e\nBefore painting, clean dust and filler particles using Selleys Sugar Soap or Selleys Super Kleen.\u003cbr\u003e\nIn exterior applications, protect from rain until dry and painted over with 2 coats of paint.\u003cbr\u003e\nSome paints may temporarily discolour when applied over the filler, but will revert to the correct colour once dry.\u003cbr\u003e\nFor applications more than 2mm deep, or in cold or humid conditions, expect longer drying times.\u003cbr\u003e\nKeep container closed when not in use.\u003c\/p\u003e\n","brand":"Selleys","offers":[{"title":"Default Title","offer_id":52323831939438,"sku":"GA9300697110220","price":22.66,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/files\/b530a8b01f914ad1a2226402263f8730.jpg?v=1757752968"},{"product_id":"uni-pro-plaster-of-paris-fine-plaster-1kg","title":"Uni-Pro Plaster Of Paris Fine Plaster 1Kg","description":"\u003cp\u003eCasting, modelling, moulding, sculpting, carving.\u003cbr\u003e\nFine quality to hold detail.\u003cbr\u003e\nSands smooth.\u003c\/p\u003e\n","brand":"Uni-Pro","offers":[{"title":"Default Title","offer_id":52323838034286,"sku":"GA9314885032010","price":8.5,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/files\/9314885032010_2128ee70-0b3f-4b98-b3da-b1ceeaf6e3ee.jpg?v=1754711533"},{"product_id":"uni-pro-plaster-of-paris-fine-plaster-3kg","title":"Uni-Pro Plaster Of Paris Fine Plaster 3Kg","description":"\u003cp\u003eCasting, modelling, moulding, sculpting, carving.\u003cbr\u003e\nFine quality to hold detail.\u003cbr\u003e\nSands smooth.\u003c\/p\u003e\n","brand":"Uni-Pro","offers":[{"title":"Default Title","offer_id":52323838067054,"sku":"GA9314885032034","price":16.64,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/files\/9314885032034_336c390b-0197-4fce-9e3b-b61ada082343.jpg?v=1754711531"},{"product_id":"agnews-water-putty-multi-purpose-filler-floor-leveler-interior-exterior-grade","title":"Agnews Water Putty - Multi-Purpose Filler \u0026 Floor Leveler (Interior\/Exterior Grade)","description":"\u003cdiv class=\"product-description\"\u003e\n\u003ch2\u003eAgnews Water Putty - Hard-Setting Filler for Wood, Plasterboard, Concrete \u0026amp; More\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eAgnews Water Putty\u003c\/strong\u003e is a professional, powder-based repair and levelling compound for durable, long-lasting results. Mix only what you need with clean water, then patch, level or rebuild surfaces with confidence. Once cured, it sets rock hard, bonds permanently, and can be sawn, drilled and sanded to a smooth, paint-ready finish.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Agnews\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnlimited shelf life\u003c\/strong\u003e when stored dry\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNon cracking\u003c\/strong\u003e, \u003cstrong\u003enon shrinking\u003c\/strong\u003e, \u003cstrong\u003enon sinking\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWon't fall out\u003c\/strong\u003e – adheres firmly and fills to any depth\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInterior \u0026amp; exterior grade\u003c\/strong\u003e (seal exterior applications after full dry)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNon flammable\u003c\/strong\u003e and \u003cstrong\u003eno VOCs\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMix what you need\u003c\/strong\u003e for minimal waste\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSuitable substrates\u003c\/h3\u003e\n\u003cp\u003ePlasterboard, concrete, wood\/timber, cement sheet, masonry. Also suitable for minor floor levelling and feathering on concrete, timber and ceramic tile substrates.\u003c\/p\u003e\n\u003ch3\u003eTypical applications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFill holes in wood:\u003c\/strong\u003e knotholes, nail and screw holes, dents, edge build-ups\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWall patching:\u003c\/strong\u003e cracks and cavities in plasterboard and cement sheet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFurniture repair:\u003c\/strong\u003e tighten loose joints, reset fasteners, rebuild profiles\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloor levelling:\u003c\/strong\u003e ramp or smooth minor level variations before floor coverings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim and fixtures:\u003c\/strong\u003e refit loose door bumpers and trims with reliable hold\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArchitectural \u0026amp; hobby moulding:\u003c\/strong\u003e casting and shaping durable components\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy choose Agnews\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eAgnews Water Putty\u003c\/strong\u003e cures to a dense, stone-hard finish that resists shrinkage and cracking even in deep fills. It bonds securely, stays put, and finishes cleanly, delivering a stable base for sanding, priming and painting. From small touch-ups to larger restorations, it provides consistent, professional results.\u003c\/p\u003e\n\u003ch3\u003eDirections (general guide)\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface prep:\u003c\/strong\u003e Ensure the area is clean, dry, sound and free of dust, oil or loose material. For very porous substrates, lightly dampen to reduce rapid suction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMix:\u003c\/strong\u003e Add powder to clean water and blend to a smooth, lump-free paste. Adjust water to suit application (thicker for filling, looser for fairing\/skim).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApply:\u003c\/strong\u003e Press firmly into cracks or voids with a putty knife or trowel. Overfill slightly so you can sand back flush.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCure:\u003c\/strong\u003e Allow to dry thoroughly. Dry time varies with thickness, temperature and humidity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Sand to profile. Prime and paint or seal. For exterior applications, always seal after full dry.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eExterior use guidance\u003c\/h3\u003e\n\u003cp\u003eThis is a hard-setting, non-flexible compound. For exterior use, only apply over stable substrates with minimal expansion and contraction from temperature changes. Ensure the putty is fully dry before sealing with a suitable exterior-grade coating.\u003c\/p\u003e\n\u003ch3\u003eFinishing \u0026amp; compatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePaintable and sealable after full dry; prime as required for best results.\u003c\/li\u003e\n\u003cli\u003eCan be cut, carved, drilled and sanded after cure without crumbling.\u003c\/li\u003e\n\u003cli\u003eFor stained timber finishes, test a small area first for colour and absorption.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePro tips\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMix small batches and use promptly.\u003c\/li\u003e\n\u003cli\u003eFor deep voids, apply in layers if needed, allowing each layer to firm before the next.\u003c\/li\u003e\n\u003cli\u003eStore powder in a cool, dry place to maintain its unlimited shelf life.\u003c\/li\u003e\n\u003cli\u003eClean tools with water before material cures.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSubstrates: plasterboard, concrete, wood\/timber, cement sheet, masonry\u003c\/li\u003e\n\u003cli\u003eUses: patching, levelling, rebuilding, moulding\u003c\/li\u003e\n\u003cli\u003eProperties: non cracking, non shrinking, non sinking, non flammable, no VOCs\u003c\/li\u003e\n\u003cli\u003eFinish: hard, dense, smooth and paint-ready after sanding\/priming\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Timbermate","offers":[{"title":"500g","offer_id":52652968771950,"sku":"GA9313302000014","price":8.77,"currency_code":"AUD","in_stock":true},{"title":"1Kg","offer_id":52652968804718,"sku":"GA9313302000021","price":15.33,"currency_code":"AUD","in_stock":true},{"title":"5Kg","offer_id":52652968837486,"sku":"GA9313302000038","price":42.95,"currency_code":"AUD","in_stock":true},{"title":"20Kg","offer_id":53380030988654,"sku":"GA9313302000045","price":86.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/files\/Agnews_500g.jpg?v=1757643414"},{"product_id":"concremate-expanding-anchoring-cement-fast-set-grout-patch","title":"Concremate Expanding Anchoring Cement - Fast Set Grout \u0026 Patch","description":"\u003cdiv class=\"product-description\"\u003e\n\u003ch1\u003eConcremate Expanding Anchoring Cement\u003c\/h1\u003e\n\u003cp\u003e\u003cstrong\u003eAnchor, patch and lock in place with confidence.\u003c\/strong\u003e Concremate is a high-performance expanding cement designed for rapid, reliable anchoring and structural patching. Mixed to a workable, mortar-like consistency, it expands slightly as it cures to counteract drying shrinkage. That controlled expansion grips embedded items and surrounding material tightly, delivering a secure, long-lasting hold that stands up to strain, stress and vibration.\u003c\/p\u003e\n\u003ch2\u003eWhy choose Concremate\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast turnaround:\u003c\/strong\u003e initial set in about 30 minutes and hard in approximately 1 hour, so many jobs can progress the same day.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExpands and grips:\u003c\/strong\u003e engineered expansion of about 0.125% offsets shrinkage and locks into the substrate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh ultimate strength:\u003c\/strong\u003e cures to a finish that becomes harder than standard concrete at 28 days when properly mixed and applied.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile application:\u003c\/strong\u003e ideal for anchoring bolts, rails, brackets and fixtures, as well as patching holes, chases and cracks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable performance:\u003c\/strong\u003e forms a robust, long-term bond that resists severe mechanical stress and vibration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhere it excels\u003c\/h2\u003e\n\u003cp\u003eUse Concremate for secure embedment and structural repairs on common mineral surfaces. It is suitable for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eConcrete and masonry\u003c\/li\u003e\n\u003cli\u003eBrickwork and stone\u003c\/li\u003e\n\u003cli\u003eTiles and terrazzo\u003c\/li\u003e\n\u003cli\u003ePlaster and similar mineral substrates\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTypical projects\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAnchoring handrails, posts, machine base bolts, threaded rods and heavy brackets\u003c\/li\u003e\n\u003cli\u003eFixing door and window hardware to masonry openings\u003c\/li\u003e\n\u003cli\u003eHigh-pressure grouting under plates, around pipe sleeves and service penetrations\u003c\/li\u003e\n\u003cli\u003ePatching voids, chased conduits, spalled edges and impact damage in floors, walls and ceilings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow it works\u003c\/h2\u003e\n\u003cp\u003eConcremate is a mineral-based expanding cement. After mixing with clean water, the paste hydrates and begins to set. A small, controlled expansion during cure offsets natural drying shrinkage. The result is a tight, interference-style fit that increases grip on embedded items and keys the patch into surrounding material. For best results, the material must be able to expand slightly while drying and should not be constrained in a completely sealed cavity.\u003c\/p\u003e\n\u003ch2\u003eDirections for use\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface preparation:\u003c\/strong\u003e Remove dust, loose material, laitance, oil and contaminants. Roughen smooth surfaces and blow or brush clean. Pre-dampen porous substrates to a surface-saturated dry condition; do not leave standing water.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMixing:\u003c\/strong\u003e Add powder to clean water while stirring until a smooth, lump-free, mortar-like consistency is reached. Mix only what you can place within the working time. Do not over-water.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlacement for anchoring:\u003c\/strong\u003e Fill the prepared hole or pocket from the bottom up to avoid entrapped air. Insert the fixture or fastener while the mix is workable and align immediately. Hold steady until initial set.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlacement for patching:\u003c\/strong\u003e Tightly pack the mix into the void in layers, compacting each layer to ensure full contact. Strike off and finish the surface as required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCuring:\u003c\/strong\u003e Protect from rapid drying, wind and direct sun during early cure. Avoid vibration or load until the material has hardened.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCleanup:\u003c\/strong\u003e Clean tools and splashes with water while product is fresh. Once hardened, mechanical removal may be required.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eGood practice tips\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePlan the job so placement occurs immediately after mixing for best expansion and bond.\u003c\/li\u003e\n\u003cli\u003eFor deep holes or large voids, place in lifts and compact each lift.\u003c\/li\u003e\n\u003cli\u003eDo not confine completely in a sealed cavity; allow space for controlled expansion.\u003c\/li\u003e\n\u003cli\u003eAvoid adding sand, cement or other admixtures that can change performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePerformance and durability\u003c\/h2\u003e\n\u003cp\u003eWhen correctly mixed and applied, Concremate develops a hard, dense matrix with strong adhesion to mineral substrates and embedded metals. The slight expansion on cure reduces micro-gapping at the interface, improving load transfer and long-term durability. After full cure at 28 days, the set material achieves hardness that exceeds standard concrete, supporting demanding anchoring and patching tasks.\u003c\/p\u003e\n\u003ch2\u003eSafety and handling\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eWear suitable gloves, eye protection and a dust mask when mixing and placing.\u003c\/li\u003e\n\u003cli\u003eAvoid contact with skin and eyes. In case of contact, rinse with plenty of water.\u003c\/li\u003e\n\u003cli\u003eStore in a cool, dry place in the original, tightly closed container.\u003c\/li\u003e\n\u003cli\u003eKeep out of reach of children and pets.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProduct type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eExpanding cement anchoring and patching compound\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eForm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePremixed dry powder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eColor\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eGrey\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMix consistency\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMortar-like paste when mixed with clean water\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInitial set\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAbout 30 minutes (conditions dependent)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHard set\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eApproximately 1 hour (conditions dependent)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUltimate hardness\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eHarder than standard concrete at 28 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eExpansion\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eApprox. 0.125% during cure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRecommended substrates\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eConcrete, brick, stone, tiles, plaster, terrazzo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePrimary uses\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAnchoring bolts, rails, brackets and fixtures; patching holes, chases and cracks; high-pressure grouting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCleanup\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eWater while fresh\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStorage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCool, dry conditions in sealed container\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWhat to expect on the job\u003c\/h2\u003e\n\u003cp\u003eWith suitable surface preparation and correct mixing, you can expect a smooth placement, quick set and a dense, high-integrity bond. The expansion action helps lock hardware and patches into place. Protect new work from early movement and moisture loss, then return to service once the hard set has been achieved and the repair or anchorage has reached the necessary strength for your application.\u003c\/p\u003e\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eNot for use where the mix cannot expand slightly during cure.\u003c\/li\u003e\n\u003cli\u003eDo not apply over active movement joints or flexible substrates.\u003c\/li\u003e\n\u003cli\u003eWorking and set times vary with temperature, humidity and mix ratio.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eNote: Always trial on a small, inconspicuous area or non-critical hole to confirm suitability for your specific substrate and conditions.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Timbermate","offers":[{"title":"500g","offer_id":52653006881134,"sku":"GA9315284500056","price":17.95,"currency_code":"AUD","in_stock":true},{"title":"1Kg","offer_id":52653006913902,"sku":"GA9315284500018","price":23.5,"currency_code":"AUD","in_stock":true},{"title":"4Kg","offer_id":52653006946670,"sku":"GA9315284500049","price":53.2,"currency_code":"AUD","in_stock":true},{"title":"10Kg","offer_id":52653006979438,"sku":"GA9315284500100","price":115.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/files\/Earls_Concremate_500g_Tub.jpg?v=1757644477"},{"product_id":"dunlop-ready-to-go-coloured-grout-anti-mould-no-mix-800g","title":"Dunlop Ready-to-Go Coloured Grout, Anti-Mould No-Mix - 800g","description":"\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eDunlop Ready-to-Go Coloured Grout\u003c\/strong\u003e is a premium, pre-mixed grout for fast, clean results on walls and floors. No mixing, no mess, just open, apply, and buff for a smooth, long-lasting finish. The formula includes \u003cem\u003eGrout Shield\u003c\/em\u003e for anti-mould and anti-bacterial protection to help surfaces stay cleaner for longer. Suitable for interior and exterior applications, and available in a wide colour range to match or contrast your tiles.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eReady-mixed convenience, apply straight from the tub\u003c\/li\u003e\n\u003cli\u003eContains Grout Shield for mould and bacteria resistance\u003c\/li\u003e\n\u003cli\u003eUse on walls \u0026amp; floors, indoors \u0026amp; outdoors*\u003c\/li\u003e\n\u003cli\u003eIdeal for joint widths from \u003cstrong\u003e1–5 mm\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eGreat for rejuvenating old grout (min. removal depth: \u003cstrong\u003e1 mm walls\u003c\/strong\u003e, \u003cstrong\u003e2 mm floors\u003c\/strong\u003e)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003csmall\u003e*Always follow the data sheet guidance for your specific area and exposure.\u003c\/small\u003e\u003c\/p\u003e\n\u003c!-- cites: ready-mix, Grout Shield, walls\/floors, joint widths, rejuvenation --\u003e \u003c!-- Dunlop datasheet confirms suitability, joint sizes, rejuvenation depths; Bunnings page confirms anti-mould\/anti-bacterial --\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch3\u003eWhere to Use\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCeramic, porcelain and most glazed tiles\u003c\/li\u003e\n\u003cli\u003eBathrooms, kitchens, splashbacks, laundries, living areas\u003c\/li\u003e\n\u003cli\u003eLight-duty exterior tiled areas (check exposure \u0026amp; substrate)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis grout is designed for typical domestic and light commercial tiling where a smooth, uniform finish is desired.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch3\u003eColours \u0026amp; Finish\u003c\/h3\u003e\n\u003cp\u003eAvailable in a contemporary colour palette (e.g. whites and greys) to complement most tile styles. Use Dunlop’s colour selector to visualise combinations before you start.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch3\u003eCoverage\u003c\/h3\u003e\n\u003cp\u003eCoverage varies by tile size, joint width and depth. As a guide (per \u003cstrong\u003ekg\u003c\/strong\u003e) of grout:\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eTile size (L×W×Thickness)\u003c\/th\u003e\n\u003cth\u003eJoint width 1.5 mm\u003c\/th\u003e\n\u003cth\u003eJoint width 3 mm\u003c\/th\u003e\n\u003cth\u003eJoint width 5 mm\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e25×25×4 mm mosaics\u003c\/td\u003e\n\u003ctd\u003e≈1.04 m²\/kg\u003c\/td\u003e\n\u003ctd\u003e≈0.52 m²\/kg\u003c\/td\u003e\n\u003ctd\u003e≈0.31 m²\/kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e100×100×8 mm\u003c\/td\u003e\n\u003ctd\u003e≈2.08 m²\/kg\u003c\/td\u003e\n\u003ctd\u003e≈1.04 m²\/kg\u003c\/td\u003e\n\u003ctd\u003e≈0.63 m²\/kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e200×200×8 mm\u003c\/td\u003e\n\u003ctd\u003e≈4.17 m²\/kg\u003c\/td\u003e\n\u003ctd\u003e≈2.08 m²\/kg\u003c\/td\u003e\n\u003ctd\u003e≈1.25 m²\/kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eTip:\u003c\/em\u003e Allow an extra \u003cstrong\u003e10–15%\u003c\/strong\u003e for wastage due to technique, tile type and site conditions.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch3\u003eDirections (Summary)\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrep:\u003c\/strong\u003e Ensure joints are clean, dry, and free from dust, adhesive residue and contaminants. For rejuvenation, remove at least 1 mm (walls) or 2 mm (floors) of old grout.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApply:\u003c\/strong\u003e Using a rubber grout float, force grout firmly into joints at a 45° angle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrike \u0026amp; shape:\u003c\/strong\u003e Allow grout to firm in the joint (~15 mins). Shape joints as required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean:\u003c\/strong\u003e Wipe diagonally with a dense, damp sponge, rinsing frequently. Use minimal water to reduce shade variation and shrinkage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuff:\u003c\/strong\u003e When touch-dry (typically \u003cstrong\u003e6–24 hrs\u003c\/strong\u003e), buff tile faces with a clean, dry cloth.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch3\u003eDrying \u0026amp; Use\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInitial set at ~\u003cstrong\u003e24 hrs\u003c\/strong\u003e at 23 °C \/ 50% RH\u003c\/li\u003e\n\u003cli\u003eShower walls can be exposed to water after ~\u003cstrong\u003e24 hrs\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch3\u003eClean-Up \u0026amp; Storage\u003c\/h3\u003e\n\u003cp\u003eClean tools and residue with water while the grout is still wet. Reseal the tub between uses to prevent skinning. Store upright in a cool, dry place.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eRead the Safety Data Sheet before use and follow PPE guidance. Avoid contact with eyes and prolonged skin contact. Keep out of reach of children.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Dunlop","offers":[{"title":"White","offer_id":52745127657838,"sku":"GA9315021022124","price":20.13,"currency_code":"AUD","in_stock":true},{"title":"Ultrawhite","offer_id":52745127821678,"sku":"GA9315021023442","price":16.3,"currency_code":"AUD","in_stock":true},{"title":"Misty Grey","offer_id":52745128837486,"sku":"GA9315021022209","price":20.13,"currency_code":"AUD","in_stock":true},{"title":"Slate Grey","offer_id":52745129001326,"sku":"GA9315021022148","price":20.18,"currency_code":"AUD","in_stock":true},{"title":"Jet Black","offer_id":52745129132398,"sku":"GA9315021022131","price":16.3,"currency_code":"AUD","in_stock":true},{"title":"Charred Ash","offer_id":54246017073518,"sku":"GA9315021023800","price":22.13,"currency_code":"AUD","in_stock":true},{"title":"Magellan Grey","offer_id":54246017106286,"sku":"GA9315021023909","price":22.09,"currency_code":"AUD","in_stock":true},{"title":"Travertine","offer_id":54246017139054,"sku":"GA9315021022216","price":22.13,"currency_code":"AUD","in_stock":true},{"title":"Buff","offer_id":54246017171822,"sku":"GA9315021022155","price":22.13,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/files\/white.png?v=1760231596"},{"product_id":"bastion-superlite-lightweight-tile-adhesive-11-kg","title":"Bastion Superlite Lightweight Tile Adhesive 11 kg","description":"\u003cp\u003e\u003cstrong\u003eBastion Superlite Lightweight Tile Adhesive 11 kg\u003c\/strong\u003e is a reliable lightweight polymer modified tile adhesive with excellent spread chosen for home repairs, trade work, and craft builds when you want a bond you can trust. Designed for Australian conditions, it balances strength, ease of use, and clean application so you can get professional results without special tools. The 11 kg pack is ideal for general work and keeps neatly in a toolbox or caddy.\u003c\/p\u003e\n\n\u003ch3\u003eWhy choose Bastion Superlite for your next project\u003c\/h3\u003e\n\u003cp\u003eEveryday jobs often involve mixed materials and imperfect surfaces. Bastion Superlite Lightweight Tile Adhesive 11 kg has been formulated to wet out well, grab quickly, and cure to a tough finish that resists movement and contact stress. It maintains bond integrity across common temperature swings and has dependable resistance to moisture and most household chemicals. Whether you are fixing, building, sealing, or assembling, this product gives you confidence from first squeeze through final set.\u003c\/p\u003e\n\n\u003ch3\u003eBest for\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eLarge format wall and floor tiles\u003c\/li\u003e\n\u003cli\u003eSubstrates where reduced slump is beneficial\u003c\/li\u003e\n\u003cli\u003eRenovations that require easy trowelling\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSuitable surfaces\u003c\/h3\u003e\n\u003cp\u003eThe adhesive works well on the following surface types when properly prepared:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConcrete and screeds\u003c\/li\u003e\n\u003cli\u003eFibre cement sheet\u003c\/li\u003e\n\u003cli\u003eExisting tiles suitably prepared\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSurface preparation\u003c\/h3\u003e\n\u003cp\u003eGood preparation is the key to a long lasting repair. Remove loose material, dust, and grease. Wipe glossy areas with methylated spirits or an approved cleaner and allow to dry. On very smooth plastics and metals, lightly roughen with fine abrasive paper to give the adhesive a mechanical key. Dry fit parts first and mark alignment points so you can assemble accurately within the open time. If bonding porous materials, ensure both faces are dry and free of surface chalking.\u003c\/p\u003e\n\n\u003ch3\u003eHow to use\u003c\/h3\u003e\n\u003col\u003e\n  \u003cli\u003eCheck fit and plan clamping. Do a trial run without adhesive so you know the order of steps.\u003c\/li\u003e\n  \u003cli\u003eApply a thin, continuous bead to one surface. For wide pieces, use a zig zag pattern to maximise wetting.\u003c\/li\u003e\n  \u003cli\u003eBring surfaces together within the stated open time of per data on the bag for open time and adjust for ambient conditions. Reseat once if needed, then hold steady.\u003c\/li\u003e\n  \u003cli\u003eApply even pressure using clamps, tape, weights, or temporary fasteners. Avoid squeezing all adhesive out of the joint.\u003c\/li\u003e\n  \u003cli\u003eAllow to cure undisturbed. Initial handling strength will develop as the adhesive sets, with a full cure reached based on the chemistry described below.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch3\u003eCure profile\u003c\/h3\u003e\n\u003cp\u003eObserve recommended open time and bed thickness. Allow the adhesive to set before grouting and traffic.\u003c\/p\u003e\n\n\u003ch3\u003eTemperature and environmental performance\u003c\/h3\u003e\n\u003cp\u003eInstall in mild weather to ensure predictable curing. Avoid application to very cold, sweating, or waterlogged surfaces. For outdoor use protect fresh bonds from rain until the skin has formed and the core has progressed in cure. Once fully cured, the bond resists normal weathering, splash water, and intermittent UV exposure based on the substrate and paint systems used.\u003c\/p\u003e\n\n\u003ch3\u003eClean up and finishing\u003c\/h3\u003e\n\u003cp\u003eClean trowels and buckets with water before the mix hardens. When cured, excess can be carefully trimmed or sanded. For painted finishes, allow the adhesive to fully cure before priming. Test paint on a small area to confirm compatibility and drying behaviour.\u003c\/p\u003e\n\n\u003ch3\u003eCoverage guide\u003c\/h3\u003e\n\u003cp\u003eCoverage varies with bead size, surface porosity, and technique. As a general guide, a 3 mm bead yields approximately 10 to 12 linear meters per 310 mL cartridge. Smaller packs scale proportionally. Gaps, rough edges, and highly absorbent materials will reduce coverage. Plan an extra margin for offcuts and practice passes.\u003c\/p\u003e\n\n\u003ch3\u003eTips for best results\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eWork within the recommended open time so the adhesive can properly wet the surfaces.\u003c\/li\u003e\n  \u003cli\u003eUse light clamping pressure to keep parts aligned while maintaining a film thickness for strength.\u003c\/li\u003e\n  \u003cli\u003eFor very porous substrates, apply a thin precoat as a primer layer and allow it to tack before final assembly.\u003c\/li\u003e\n  \u003cli\u003eKeep joint lines clean by masking edges with painter tape and removing it before the adhesive skins.\u003c\/li\u003e\n  \u003cli\u003eWhere movement or vibration is expected, design the joint to share load across a large area.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTroubleshooting\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoor adhesion:\u003c\/strong\u003e Check for oil, release agents, or surface dust. Reclean and lightly abrade if necessary.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSlow cure:\u003c\/strong\u003e Low temperature and low humidity extend cure time. Maintain moderate conditions for best results.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVisible squeeze out:\u003c\/strong\u003e Wipe fresh material with a suitable solvent and a soft cloth. Once cured, trim carefully.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBond line prints through paint:\u003c\/strong\u003e Allow a full cure, then prime and apply thin coats of paint, allowing proper drying between coats.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eStorage and shelf life\u003c\/h3\u003e\n\u003cp\u003eStore the bag sealed in a dry place off the ground. Always check the pack for a lot code and use by guidance. Reseal immediately after use and store upright. Dispose of empty containers responsibly.\u003c\/p\u003e\n\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eRead the label before use. Wear gloves when handling uncured material. Provide ventilation in enclosed areas. Avoid contact with skin and eyes. Keep out of reach of children and pets. If sensitivity occurs, stop use and seek advice. Do not ingest. First aid directions and detailed handling information are available on the package and the safety data sheet.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCan I bond dissimilar materials?\u003c\/strong\u003e Yes, provided each surface is clean and sound. Differences in expansion are managed by the adhesive film thickness and the inherent flexibility after cure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs clamping required?\u003c\/strong\u003e Light clamping improves alignment and final strength. Excessive pressure can starve the joint of adhesive which reduces performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the bond water resistant?\u003c\/strong\u003e Once cured the bond resists splash water and routine humidity. For permanent immersion choose an adhesive designed for underwater service and follow the manufacturer guidance.\u003c\/p\u003e\n\n\u003ch3\u003ePlanning your job\u003c\/h3\u003e\n\u003cp\u003eMeasure twice and cut once. Dry assemble parts so you can confirm squareness and alignment before adhesive is involved. Keep rags, clamps, and spacers ready. If you are new to the product, test on offcuts to get a feel for bead size and squeeze out. A consistent 1 to 2 mm bond line is a good starting point for most rigid materials. Thicker lines help when surfaces are uneven. Avoid starving the joint by pressing too hard without giving the adhesive a place to reside.\u003c\/p\u003e\n\n\u003ch3\u003eResponsible use\u003c\/h3\u003e\n\u003cp\u003eChoose an adhesive that suits the materials and the environment the finished piece will face. If a joint will be submerged, carry structural loads, or be exposed to strong chemicals, check the technical data sheet for specific guidance. Many general purpose products are perfect for day to day work, while specialised tasks call for a system designed and tested for that environment. Using the right product first saves time, money, and rework.\u003c\/p\u003e\n\n\u003ch3\u003eAftercare and maintenance\u003c\/h3\u003e\n\u003cp\u003eAdhesive joints are remarkably strong when used correctly. Design repairs so that routine loads are shared across a generous area. Where heavy vibration is present, pair the adhesive bond with appropriate mechanical fasteners. Keep cleaning chemicals mild, and avoid abrasive pads on visible joints. If a bond will be repainted, choose flexible paint where movement is expected, and keep edges sealed to prevent dirt tracking along the bond line.\u003c\/p\u003e\n\n\u003ch3\u003eRecycling and disposal\u003c\/h3\u003e\n\u003cp\u003eAllow empty containers to cure before disposal. Check local council guidance for recycling of plastics and metal cartridges. Never pour uncured product into drains or soil. Wipe tools on scrap material and let residue harden before placing in general waste. Smart handling keeps the workspace clean and reduces environmental impact.\u003c\/p\u003e","brand":"Bastion","offers":[{"title":"Default Title","offer_id":52763345846638,"sku":"GA616072","price":41.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/files\/d83a0314e04b41e5869db74ad0c4e110.png?v=1760667789"},{"product_id":"dunlop-aac-block-construction-adhesive-15-kg","title":"Dunlop AAC Block Construction Adhesive 15 kg","description":"\u003cp\u003e\u003cstrong\u003eDunlop AAC Block Construction Adhesive 15 kg\u003c\/strong\u003e is a reliable thin bed adhesive for autoclaved aerated concrete blockwork chosen for home repairs, trade work, and craft builds when you want a bond you can trust. Designed for Australian conditions, it balances strength, ease of use, and clean application so you can get professional results without special tools. The 15 kg pack is ideal for general work and keeps neatly in a toolbox or caddy.\u003c\/p\u003e\n\n\u003ch3\u003eWhy choose Dunlop AAC for your next project\u003c\/h3\u003e\n\u003cp\u003eEveryday jobs often involve mixed materials and imperfect surfaces. Dunlop AAC Block Construction Adhesive 15 kg has been formulated to wet out well, grab quickly, and cure to a tough finish that resists movement and contact stress. It maintains bond integrity across common temperature swings and has dependable resistance to moisture and most household chemicals. Whether you are fixing, building, sealing, or assembling, this product gives you confidence from first squeeze through final set.\u003c\/p\u003e\n\n\u003ch3\u003eBest for\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eLaying AAC blocks in internal and external walls\u003c\/li\u003e\n\u003cli\u003eCreating straight and plumb courses with minimal waste\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSuitable surfaces\u003c\/h3\u003e\n\u003cp\u003eThe adhesive works well on the following surface types when properly prepared:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAAC blocks and panels\u003c\/li\u003e\n\u003cli\u003eSuitable primed substrates as per system design\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSurface preparation\u003c\/h3\u003e\n\u003cp\u003eGood preparation is the key to a long lasting repair. Remove loose material, dust, and grease. Wipe glossy areas with methylated spirits or an approved cleaner and allow to dry. On very smooth plastics and metals, lightly roughen with fine abrasive paper to give the adhesive a mechanical key. Dry fit parts first and mark alignment points so you can assemble accurately within the open time. If bonding porous materials, ensure both faces are dry and free of surface chalking.\u003c\/p\u003e\n\n\u003ch3\u003eHow to use\u003c\/h3\u003e\n\u003col\u003e\n  \u003cli\u003eCheck fit and plan clamping. Do a trial run without adhesive so you know the order of steps.\u003c\/li\u003e\n  \u003cli\u003eApply a thin, continuous bead to one surface. For wide pieces, use a zig zag pattern to maximise wetting.\u003c\/li\u003e\n  \u003cli\u003eBring surfaces together within the stated open time of follow bag guidance for open time and pot life. Reseat once if needed, then hold steady.\u003c\/li\u003e\n  \u003cli\u003eApply even pressure using clamps, tape, weights, or temporary fasteners. Avoid squeezing all adhesive out of the joint.\u003c\/li\u003e\n  \u003cli\u003eAllow to cure undisturbed. Initial handling strength will develop as the adhesive sets, with a full cure reached based on the chemistry described below.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch3\u003eCure profile\u003c\/h3\u003e\n\u003cp\u003eMix to a creamy consistency and apply with a notched trowel. Align blocks within the open time and tap to level. Allow to set before further work.\u003c\/p\u003e\n\n\u003ch3\u003eTemperature and environmental performance\u003c\/h3\u003e\n\u003cp\u003eProtect fresh work from rain, frost, and high heat. Avoid application to very cold, sweating, or waterlogged surfaces. For outdoor use protect fresh bonds from rain until the skin has formed and the core has progressed in cure. Once fully cured, the bond resists normal weathering, splash water, and intermittent UV exposure based on the substrate and paint systems used.\u003c\/p\u003e\n\n\u003ch3\u003eClean up and finishing\u003c\/h3\u003e\n\u003cp\u003eWash tools with water while material is fresh. Remove spills promptly. When cured, excess can be carefully trimmed or sanded. For painted finishes, allow the adhesive to fully cure before priming. Test paint on a small area to confirm compatibility and drying behaviour.\u003c\/p\u003e\n\n\u003ch3\u003eCoverage guide\u003c\/h3\u003e\n\u003cp\u003eCoverage varies with bead size, surface porosity, and technique. As a general guide, a 3 mm bead yields approximately 10 to 12 linear meters per 310 mL cartridge. Smaller packs scale proportionally. Gaps, rough edges, and highly absorbent materials will reduce coverage. Plan an extra margin for offcuts and practice passes.\u003c\/p\u003e\n\n\u003ch3\u003eTips for best results\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eWork within the recommended open time so the adhesive can properly wet the surfaces.\u003c\/li\u003e\n  \u003cli\u003eUse light clamping pressure to keep parts aligned while maintaining a film thickness for strength.\u003c\/li\u003e\n  \u003cli\u003eFor very porous substrates, apply a thin precoat as a primer layer and allow it to tack before final assembly.\u003c\/li\u003e\n  \u003cli\u003eKeep joint lines clean by masking edges with painter tape and removing it before the adhesive skins.\u003c\/li\u003e\n  \u003cli\u003eWhere movement or vibration is expected, design the joint to share load across a large area.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTroubleshooting\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoor adhesion:\u003c\/strong\u003e Check for oil, release agents, or surface dust. Reclean and lightly abrade if necessary.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSlow cure:\u003c\/strong\u003e Low temperature and low humidity extend cure time. Maintain moderate conditions for best results.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVisible squeeze out:\u003c\/strong\u003e Wipe fresh material with a suitable solvent and a soft cloth. Once cured, trim carefully.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBond line prints through paint:\u003c\/strong\u003e Allow a full cure, then prime and apply thin coats of paint, allowing proper drying between coats.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eStorage and shelf life\u003c\/h3\u003e\n\u003cp\u003eKeep dry and use within shelf life. Always check the pack for a lot code and use by guidance. Reseal immediately after use and store upright. Dispose of empty containers responsibly.\u003c\/p\u003e\n\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eRead the label before use. Wear gloves when handling uncured material. Provide ventilation in enclosed areas. Avoid contact with skin and eyes. Keep out of reach of children and pets. If sensitivity occurs, stop use and seek advice. Do not ingest. First aid directions and detailed handling information are available on the package and the safety data sheet.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCan I bond dissimilar materials?\u003c\/strong\u003e Yes, provided each surface is clean and sound. Differences in expansion are managed by the adhesive film thickness and the inherent flexibility after cure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs clamping required?\u003c\/strong\u003e Light clamping improves alignment and final strength. Excessive pressure can starve the joint of adhesive which reduces performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the bond water resistant?\u003c\/strong\u003e Once cured the bond resists splash water and routine humidity. For permanent immersion choose an adhesive designed for underwater service and follow the manufacturer guidance.\u003c\/p\u003e\n\n\u003ch3\u003ePlanning your job\u003c\/h3\u003e\n\u003cp\u003eMeasure twice and cut once. Dry assemble parts so you can confirm squareness and alignment before adhesive is involved. Keep rags, clamps, and spacers ready. If you are new to the product, test on offcuts to get a feel for bead size and squeeze out. A consistent 1 to 2 mm bond line is a good starting point for most rigid materials. Thicker lines help when surfaces are uneven. Avoid starving the joint by pressing too hard without giving the adhesive a place to reside.\u003c\/p\u003e\n\n\u003ch3\u003eResponsible use\u003c\/h3\u003e\n\u003cp\u003eChoose an adhesive that suits the materials and the environment the finished piece will face. If a joint will be submerged, carry structural loads, or be exposed to strong chemicals, check the technical data sheet for specific guidance. Many general purpose products are perfect for day to day work, while specialised tasks call for a system designed and tested for that environment. Using the right product first saves time, money, and rework.\u003c\/p\u003e\n\n\u003ch3\u003eAftercare and maintenance\u003c\/h3\u003e\n\u003cp\u003eAdhesive joints are remarkably strong when used correctly. Design repairs so that routine loads are shared across a generous area. Where heavy vibration is present, pair the adhesive bond with appropriate mechanical fasteners. Keep cleaning chemicals mild, and avoid abrasive pads on visible joints. If a bond will be repainted, choose flexible paint where movement is expected, and keep edges sealed to prevent dirt tracking along the bond line.\u003c\/p\u003e\n\n\u003ch3\u003eRecycling and disposal\u003c\/h3\u003e\n\u003cp\u003eAllow empty containers to cure before disposal. Check local council guidance for recycling of plastics and metal cartridges. Never pour uncured product into drains or soil. Wipe tools on scrap material and let residue harden before placing in general waste. Smart handling keeps the workspace clean and reduces environmental impact.\u003c\/p\u003e","brand":"Dunlop","offers":[{"title":"Default Title","offer_id":52763345879406,"sku":"GA9315021023886","price":32.41,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/files\/a6481492858d4912b26f05d347397e7d.jpg?v=1760667790"},{"product_id":"dunlop-floorfix-professional-tile-adhesive-15-kg","title":"Dunlop Floorfix Professional Tile Adhesive 15 kg","description":"\u003cp\u003e\u003cstrong\u003eDunlop Floorfix Professional Tile Adhesive 15 kg\u003c\/strong\u003e is a reliable cement based floor tile adhesive for porcelain and ceramic tiles chosen for home repairs, trade work, and craft builds when you want a bond you can trust. Designed for Australian conditions, it balances strength, ease of use, and clean application so you can get professional results without special tools. The 15 kg pack is ideal for general work and keeps neatly in a toolbox or caddy.\u003c\/p\u003e\n\n\u003ch3\u003eWhy choose Dunlop Floorfix for your next project\u003c\/h3\u003e\n\u003cp\u003eEveryday jobs often involve mixed materials and imperfect surfaces. Dunlop Floorfix Professional Tile Adhesive 15 kg has been formulated to wet out well, grab quickly, and cure to a tough finish that resists movement and contact stress. It maintains bond integrity across common temperature swings and has dependable resistance to moisture and most household chemicals. Whether you are fixing, building, sealing, or assembling, this product gives you confidence from first squeeze through final set.\u003c\/p\u003e\n\n\u003ch3\u003eBest for\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eGeneral floor tiling\u003c\/li\u003e\n\u003cli\u003eHigh traffic residential areas\u003c\/li\u003e\n\u003cli\u003eBack buttering dense porcelain tiles\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSuitable surfaces\u003c\/h3\u003e\n\u003cp\u003eThe adhesive works well on the following surface types when properly prepared:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConcrete slabs and screeds\u003c\/li\u003e\n\u003cli\u003eCement sheet underlay\u003c\/li\u003e\n\u003cli\u003eExisting tiles that are clean and sound\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSurface preparation\u003c\/h3\u003e\n\u003cp\u003eGood preparation is the key to a long lasting repair. Remove loose material, dust, and grease. Wipe glossy areas with methylated spirits or an approved cleaner and allow to dry. On very smooth plastics and metals, lightly roughen with fine abrasive paper to give the adhesive a mechanical key. Dry fit parts first and mark alignment points so you can assemble accurately within the open time. If bonding porous materials, ensure both faces are dry and free of surface chalking.\u003c\/p\u003e\n\n\u003ch3\u003eHow to use\u003c\/h3\u003e\n\u003col\u003e\n  \u003cli\u003eCheck fit and plan clamping. Do a trial run without adhesive so you know the order of steps.\u003c\/li\u003e\n  \u003cli\u003eApply a thin, continuous bead to one surface. For wide pieces, use a zig zag pattern to maximise wetting.\u003c\/li\u003e\n  \u003cli\u003eBring surfaces together within the stated open time of as indicated on the bag for best wetting and transfer. Reseat once if needed, then hold steady.\u003c\/li\u003e\n  \u003cli\u003eApply even pressure using clamps, tape, weights, or temporary fasteners. Avoid squeezing all adhesive out of the joint.\u003c\/li\u003e\n  \u003cli\u003eAllow to cure undisturbed. Initial handling strength will develop as the adhesive sets, with a full cure reached based on the chemistry described below.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch3\u003eCure profile\u003c\/h3\u003e\n\u003cp\u003eRespect open time and bed thickness. Allow adequate set before grouting and opening to traffic.\u003c\/p\u003e\n\n\u003ch3\u003eTemperature and environmental performance\u003c\/h3\u003e\n\u003cp\u003eApply in suitable ambient conditions for predictable cure. Avoid application to very cold, sweating, or waterlogged surfaces. For outdoor use protect fresh bonds from rain until the skin has formed and the core has progressed in cure. Once fully cured, the bond resists normal weathering, splash water, and intermittent UV exposure based on the substrate and paint systems used.\u003c\/p\u003e\n\n\u003ch3\u003eClean up and finishing\u003c\/h3\u003e\n\u003cp\u003eDamp sponge on fresh residue, water clean-up for tools. When cured, excess can be carefully trimmed or sanded. For painted finishes, allow the adhesive to fully cure before priming. Test paint on a small area to confirm compatibility and drying behaviour.\u003c\/p\u003e\n\n\u003ch3\u003eCoverage guide\u003c\/h3\u003e\n\u003cp\u003eCoverage varies with bead size, surface porosity, and technique. As a general guide, a 3 mm bead yields approximately 10 to 12 linear meters per 310 mL cartridge. Smaller packs scale proportionally. Gaps, rough edges, and highly absorbent materials will reduce coverage. Plan an extra margin for offcuts and practice passes.\u003c\/p\u003e\n\n\u003ch3\u003eTips for best results\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eWork within the recommended open time so the adhesive can properly wet the surfaces.\u003c\/li\u003e\n  \u003cli\u003eUse light clamping pressure to keep parts aligned while maintaining a film thickness for strength.\u003c\/li\u003e\n  \u003cli\u003eFor very porous substrates, apply a thin precoat as a primer layer and allow it to tack before final assembly.\u003c\/li\u003e\n  \u003cli\u003eKeep joint lines clean by masking edges with painter tape and removing it before the adhesive skins.\u003c\/li\u003e\n  \u003cli\u003eWhere movement or vibration is expected, design the joint to share load across a large area.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTroubleshooting\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoor adhesion:\u003c\/strong\u003e Check for oil, release agents, or surface dust. Reclean and lightly abrade if necessary.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSlow cure:\u003c\/strong\u003e Low temperature and low humidity extend cure time. Maintain moderate conditions for best results.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVisible squeeze out:\u003c\/strong\u003e Wipe fresh material with a suitable solvent and a soft cloth. Once cured, trim carefully.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBond line prints through paint:\u003c\/strong\u003e Allow a full cure, then prime and apply thin coats of paint, allowing proper drying between coats.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eStorage and shelf life\u003c\/h3\u003e\n\u003cp\u003eStore sealed and dry to prevent lumping. Always check the pack for a lot code and use by guidance. Reseal immediately after use and store upright. Dispose of empty containers responsibly.\u003c\/p\u003e\n\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eRead the label before use. Wear gloves when handling uncured material. Provide ventilation in enclosed areas. Avoid contact with skin and eyes. Keep out of reach of children and pets. If sensitivity occurs, stop use and seek advice. Do not ingest. First aid directions and detailed handling information are available on the package and the safety data sheet.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCan I bond dissimilar materials?\u003c\/strong\u003e Yes, provided each surface is clean and sound. Differences in expansion are managed by the adhesive film thickness and the inherent flexibility after cure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs clamping required?\u003c\/strong\u003e Light clamping improves alignment and final strength. Excessive pressure can starve the joint of adhesive which reduces performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the bond water resistant?\u003c\/strong\u003e Once cured the bond resists splash water and routine humidity. For permanent immersion choose an adhesive designed for underwater service and follow the manufacturer guidance.\u003c\/p\u003e\n\n\u003ch3\u003ePlanning your job\u003c\/h3\u003e\n\u003cp\u003eMeasure twice and cut once. Dry assemble parts so you can confirm squareness and alignment before adhesive is involved. Keep rags, clamps, and spacers ready. If you are new to the product, test on offcuts to get a feel for bead size and squeeze out. A consistent 1 to 2 mm bond line is a good starting point for most rigid materials. Thicker lines help when surfaces are uneven. Avoid starving the joint by pressing too hard without giving the adhesive a place to reside.\u003c\/p\u003e\n\n\u003ch3\u003eResponsible use\u003c\/h3\u003e\n\u003cp\u003eChoose an adhesive that suits the materials and the environment the finished piece will face. If a joint will be submerged, carry structural loads, or be exposed to strong chemicals, check the technical data sheet for specific guidance. Many general purpose products are perfect for day to day work, while specialised tasks call for a system designed and tested for that environment. Using the right product first saves time, money, and rework.\u003c\/p\u003e\n\n\u003ch3\u003eAftercare and maintenance\u003c\/h3\u003e\n\u003cp\u003eAdhesive joints are remarkably strong when used correctly. Design repairs so that routine loads are shared across a generous area. Where heavy vibration is present, pair the adhesive bond with appropriate mechanical fasteners. Keep cleaning chemicals mild, and avoid abrasive pads on visible joints. If a bond will be repainted, choose flexible paint where movement is expected, and keep edges sealed to prevent dirt tracking along the bond line.\u003c\/p\u003e\n\n\u003ch3\u003eRecycling and disposal\u003c\/h3\u003e\n\u003cp\u003eAllow empty containers to cure before disposal. Check local council guidance for recycling of plastics and metal cartridges. Never pour uncured product into drains or soil. Wipe tools on scrap material and let residue harden before placing in general waste. Smart handling keeps the workspace clean and reduces environmental impact.\u003c\/p\u003e","brand":"Dunlop","offers":[{"title":"Default Title","offer_id":52763345912174,"sku":"GA9315021021226","price":18.53,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/files\/f2d8239c7c8a4ceb8f633715c0434240_7871b1ef-b64f-4539-b3d9-c498e64f8fca.jpg?v=1760667789"},{"product_id":"davco-smp-evo-flexible-tile-adhesive-5-kg","title":"Davco SMP Evo Flexible Tile Adhesive 5 kg","description":"\u003cp\u003e\u003cstrong\u003eDavco SMP Evo Flexible Tile Adhesive 5 kg\u003c\/strong\u003e is a reliable polymer modified flexible tile adhesive for demanding substrates chosen for home repairs, trade work, and craft builds when you want a bond you can trust. Designed for Australian conditions, it balances strength, ease of use, and clean application so you can get professional results without special tools. The 5 kg pack is ideal for general work and keeps neatly in a toolbox or caddy.\u003c\/p\u003e\n\n\u003ch3\u003eWhy choose Davco SMP for your next project\u003c\/h3\u003e\n\u003cp\u003eEveryday jobs often involve mixed materials and imperfect surfaces. Davco SMP Evo Flexible Tile Adhesive 5 kg has been formulated to wet out well, grab quickly, and cure to a tough finish that resists movement and contact stress. It maintains bond integrity across common temperature swings and has dependable resistance to moisture and most household chemicals. Whether you are fixing, building, sealing, or assembling, this product gives you confidence from first squeeze through final set.\u003c\/p\u003e\n\n\u003ch3\u003eBest for\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eBathrooms, kitchens, and balconies\u003c\/li\u003e\n\u003cli\u003eTiling over existing tiles where movement accommodation is needed\u003c\/li\u003e\n\u003cli\u003eFloor and wall applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSuitable surfaces\u003c\/h3\u003e\n\u003cp\u003eThe adhesive works well on the following surface types when properly prepared:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConcrete and screeds\u003c\/li\u003e\n\u003cli\u003eFibre cement sheeting\u003c\/li\u003e\n\u003cli\u003eExisting glazed tiles after scuffing and cleaning\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSurface preparation\u003c\/h3\u003e\n\u003cp\u003eGood preparation is the key to a long lasting repair. Remove loose material, dust, and grease. Wipe glossy areas with methylated spirits or an approved cleaner and allow to dry. On very smooth plastics and metals, lightly roughen with fine abrasive paper to give the adhesive a mechanical key. Dry fit parts first and mark alignment points so you can assemble accurately within the open time. If bonding porous materials, ensure both faces are dry and free of surface chalking.\u003c\/p\u003e\n\n\u003ch3\u003eHow to use\u003c\/h3\u003e\n\u003col\u003e\n  \u003cli\u003eCheck fit and plan clamping. Do a trial run without adhesive so you know the order of steps.\u003c\/li\u003e\n  \u003cli\u003eApply a thin, continuous bead to one surface. For wide pieces, use a zig zag pattern to maximise wetting.\u003c\/li\u003e\n  \u003cli\u003eBring surfaces together within the stated open time of per data on the bag, adjust for weather. Reseat once if needed, then hold steady.\u003c\/li\u003e\n  \u003cli\u003eApply even pressure using clamps, tape, weights, or temporary fasteners. Avoid squeezing all adhesive out of the joint.\u003c\/li\u003e\n  \u003cli\u003eAllow to cure undisturbed. Initial handling strength will develop as the adhesive sets, with a full cure reached based on the chemistry described below.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch3\u003eCure profile\u003c\/h3\u003e\n\u003cp\u003eObserve open time, bed thickness, and traffic restrictions. The polymer modification gives improved flexibility once cured.\u003c\/p\u003e\n\n\u003ch3\u003eTemperature and environmental performance\u003c\/h3\u003e\n\u003cp\u003eInstall in moderate conditions and shield fresh work from wind and direct sun. Avoid application to very cold, sweating, or waterlogged surfaces. For outdoor use protect fresh bonds from rain until the skin has formed and the core has progressed in cure. Once fully cured, the bond resists normal weathering, splash water, and intermittent UV exposure based on the substrate and paint systems used.\u003c\/p\u003e\n\n\u003ch3\u003eClean up and finishing\u003c\/h3\u003e\n\u003cp\u003eWater clean-up while fresh. Remove haze before it hardens. When cured, excess can be carefully trimmed or sanded. For painted finishes, allow the adhesive to fully cure before priming. Test paint on a small area to confirm compatibility and drying behaviour.\u003c\/p\u003e\n\n\u003ch3\u003eCoverage guide\u003c\/h3\u003e\n\u003cp\u003eCoverage varies with bead size, surface porosity, and technique. As a general guide, a 3 mm bead yields approximately 10 to 12 linear meters per 310 mL cartridge. Smaller packs scale proportionally. Gaps, rough edges, and highly absorbent materials will reduce coverage. Plan an extra margin for offcuts and practice passes.\u003c\/p\u003e\n\n\u003ch3\u003eTips for best results\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eWork within the recommended open time so the adhesive can properly wet the surfaces.\u003c\/li\u003e\n  \u003cli\u003eUse light clamping pressure to keep parts aligned while maintaining a film thickness for strength.\u003c\/li\u003e\n  \u003cli\u003eFor very porous substrates, apply a thin precoat as a primer layer and allow it to tack before final assembly.\u003c\/li\u003e\n  \u003cli\u003eKeep joint lines clean by masking edges with painter tape and removing it before the adhesive skins.\u003c\/li\u003e\n  \u003cli\u003eWhere movement or vibration is expected, design the joint to share load across a large area.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTroubleshooting\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoor adhesion:\u003c\/strong\u003e Check for oil, release agents, or surface dust. Reclean and lightly abrade if necessary.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSlow cure:\u003c\/strong\u003e Low temperature and low humidity extend cure time. Maintain moderate conditions for best results.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVisible squeeze out:\u003c\/strong\u003e Wipe fresh material with a suitable solvent and a soft cloth. Once cured, trim carefully.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBond line prints through paint:\u003c\/strong\u003e Allow a full cure, then prime and apply thin coats of paint, allowing proper drying between coats.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eStorage and shelf life\u003c\/h3\u003e\n\u003cp\u003eKeep the bag closed and dry between uses. Always check the pack for a lot code and use by guidance. Reseal immediately after use and store upright. Dispose of empty containers responsibly.\u003c\/p\u003e\n\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eRead the label before use. Wear gloves when handling uncured material. Provide ventilation in enclosed areas. Avoid contact with skin and eyes. Keep out of reach of children and pets. If sensitivity occurs, stop use and seek advice. Do not ingest. First aid directions and detailed handling information are available on the package and the safety data sheet.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCan I bond dissimilar materials?\u003c\/strong\u003e Yes, provided each surface is clean and sound. Differences in expansion are managed by the adhesive film thickness and the inherent flexibility after cure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs clamping required?\u003c\/strong\u003e Light clamping improves alignment and final strength. Excessive pressure can starve the joint of adhesive which reduces performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the bond water resistant?\u003c\/strong\u003e Once cured the bond resists splash water and routine humidity. For permanent immersion choose an adhesive designed for underwater service and follow the manufacturer guidance.\u003c\/p\u003e\n\n\u003ch3\u003ePlanning your job\u003c\/h3\u003e\n\u003cp\u003eMeasure twice and cut once. Dry assemble parts so you can confirm squareness and alignment before adhesive is involved. Keep rags, clamps, and spacers ready. If you are new to the product, test on offcuts to get a feel for bead size and squeeze out. A consistent 1 to 2 mm bond line is a good starting point for most rigid materials. Thicker lines help when surfaces are uneven. Avoid starving the joint by pressing too hard without giving the adhesive a place to reside.\u003c\/p\u003e\n\n\u003ch3\u003eResponsible use\u003c\/h3\u003e\n\u003cp\u003eChoose an adhesive that suits the materials and the environment the finished piece will face. If a joint will be submerged, carry structural loads, or be exposed to strong chemicals, check the technical data sheet for specific guidance. Many general purpose products are perfect for day to day work, while specialised tasks call for a system designed and tested for that environment. Using the right product first saves time, money, and rework.\u003c\/p\u003e\n\n\u003ch3\u003eAftercare and maintenance\u003c\/h3\u003e\n\u003cp\u003eAdhesive joints are remarkably strong when used correctly. Design repairs so that routine loads are shared across a generous area. Where heavy vibration is present, pair the adhesive bond with appropriate mechanical fasteners. Keep cleaning chemicals mild, and avoid abrasive pads on visible joints. If a bond will be repainted, choose flexible paint where movement is expected, and keep edges sealed to prevent dirt tracking along the bond line.\u003c\/p\u003e\n\n\u003ch3\u003eRecycling and disposal\u003c\/h3\u003e\n\u003cp\u003eAllow empty containers to cure before disposal. Check local council guidance for recycling of plastics and metal cartridges. Never pour uncured product into drains or soil. Wipe tools on scrap material and let residue harden before placing in general waste. Smart handling keeps the workspace clean and reduces environmental impact.\u003c\/p\u003e","brand":"Davco","offers":[{"title":"Default Title","offer_id":52763345944942,"sku":"GA253387987919","price":26.38,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/files\/99dd19e421cd43ec8df44911afee1d48.jpg?v=1760667794"},{"product_id":"dunlop-trade-resaflex-tile-adhesive-5kg","title":"Dunlop Trade Resaflex Tile Adhesive 5kg","description":"\n\u003cdiv class=\"product-copy\"\u003e\n  \u003ch2\u003eDunlop Trade Resaflex Tile Adhesive  5 kg\u003c\/h2\u003e\n  \u003cp\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003cbr\u003e\n  Dunlop Trade Resaflex Tile Adhesive  5 kg is a high quality tile adhesive designed to deliver consistent, reliable bonding performance for trade professionals and serious DIYers. It is formulated for dependable adhesion, easy application, and clean finishing so you can complete jobs with confidence and minimal rework.\u003c\/p\u003e\n\n  \u003ch3\u003eWhy choose this product\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eReliable bond performance supported by proven chemistry and rigorous quality control.\u003c\/li\u003e\n    \u003cli\u003eSmooth, predictable application that helps reduce mess and cleanup time.\u003c\/li\u003e\n    \u003cli\u003eVersatile adhesion profile suited to a wide range of substrates and project types.\u003c\/li\u003e\n    \u003cli\u003eClear guidance on surface preparation, application method, and curing to help achieve the best possible result.\u003c\/li\u003e\n    \u003cli\u003eSuitable for residential fit-outs, maintenance, repairs, and light commercial projects.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eSuitable materials\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eceramic tiles\u003c\/li\u003e\n\u003cli\u003eporcelain tiles\u003c\/li\u003e\n\u003cli\u003emosaics\u003c\/li\u003e\n\u003cli\u003estone suitable for porous adhesives\u003c\/li\u003e\n\u003cli\u003emost interior substrates\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eTypical applications\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eGeneral installation, repair, and maintenance where a durable bond is required.\u003c\/li\u003e\n    \u003cli\u003eInterior work that benefits from a neat finish and tidy joints.\u003c\/li\u003e\n    \u003cli\u003eProjects where dependable initial grab and high final strength are important.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eSurface preparation\u003c\/h3\u003e\n  \u003cp\u003eEnsure all surfaces are clean, sound, and dry. Remove dust, oil, release agents, laitance, and any loose or flaky material. For dense or non-porous surfaces, light abrasion improves key. Test adhesion on a small area if you are unsure about compatibility. Observe local safety requirements when sanding or cutting.\u003c\/p\u003e\n\n  \u003ch3\u003eApplication\u003c\/h3\u003e\n  \u003col\u003e\n    \u003cli\u003eCheck ambient and substrate temperature. Ideal application between 10°C and 30°C. Protect from freezing and rapid drying.\u003c\/li\u003e\n    \u003cli\u003eCut the nozzle to the required bead size or prepare the container according to the product type.\u003c\/li\u003e\n    \u003cli\u003eApply an even bead or spread with a suitable trowel where required. Avoid trapping air.\u003c\/li\u003e\n    \u003cli\u003ePress the materials together, ensuring full contact. For sheet goods, roll firmly to promote transfer and wetting.\u003c\/li\u003e\n    \u003cli\u003eSupport, clamp, or brace as needed until the adhesive develops sufficient handling strength.\u003c\/li\u003e\n  \u003c\/ol\u003e\n\n  \u003ch3\u003eCure and working time\u003c\/h3\u003e\n  \u003cp\u003ePot life and open time vary by product. Typically, tiles can be adjusted within minutes. Grouting commonly permitted after 24 hours under standard conditions. Cooler temperatures and high humidity will slow curing, while warmer, drier conditions accelerate it. Do not load or finish until the bond has developed adequate strength. Always follow best practice for ventilation and safe handling during cure.\u003c\/p\u003e\n\n  \u003ch3\u003eCoverage\u003c\/h3\u003e\n  \u003cp\u003eCoverage varies based on substrate profile, bead size, and installation method. As a guide, a 300 ml cartridge with a 6 mm round bead can lay several linear meters. For trowel applied adhesives, a notched trowel pattern will influence yield. Plan to have extra on hand for porous or uneven surfaces.\u003c\/p\u003e\n\n  \u003ch3\u003eLimitations\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eDo not apply to surfaces that are visibly wet unless the product specifically allows damp application.\u003c\/li\u003e\n    \u003cli\u003eAvoid continuous water immersion unless the product is rated for that exposure.\u003c\/li\u003e\n    \u003cli\u003eNot all plastics are compatible; test on polypropylene, polyethylene, and PTFE if required.\u003c\/li\u003e\n    \u003cli\u003eObserve maximum service temperature and any movement or vibration limits appropriate to the application.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eClean up\u003c\/h3\u003e\n  \u003cp\u003eClean excess adhesive from tile faces immediately with a damp sponge. Hardened material must be removed mechanically. Always read the product label and follow local regulations for disposal of leftover material and containers.\u003c\/p\u003e\n\n  \u003ch3\u003eSafety\u003c\/h3\u003e\n  \u003cp\u003eRead the label before use and keep out of reach of children. Use in a well ventilated area. Wear protective gloves and eye protection. If on skin, wash with soap and water. If in eyes, rinse cautiously and seek medical advice if irritation persists. Do not ingest. Refer to the product Safety Data Sheet for detailed information.\u003c\/p\u003e\n\n  \u003ch3\u003eStorage\u003c\/h3\u003e\n  \u003cp\u003eStore upright in a cool, dry place away from direct sunlight and heat sources. Keep the cap or nozzle tightly closed when not in use. Do not allow to freeze unless the product literature states it is freeze-thaw stable. Rotate stock to use older product first.\u003c\/p\u003e\n\n  \u003ch3\u003eTroubleshooting\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePoor adhesion:\u003c\/strong\u003e Check surface prep, remove contaminants, and reapply with firm pressure.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSlow cure:\u003c\/strong\u003e Verify temperature and humidity. Increase airflow or allow more time.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eExcess squeeze-out:\u003c\/strong\u003e Reduce bead size or spread more evenly. Clean residue before it skins.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n  \u003cp\u003e\u003cstrong\u003eCan I paint over it?\u003c\/strong\u003e Many adhesives can be overcoated once cured. Test a small area with your paint system first.\u003cbr\u003e\n  \u003cstrong\u003eIs it suitable outdoors?\u003c\/strong\u003e Check the product label for outdoor rating. Protect fresh adhesive from rain until cured.\u003cbr\u003e\n  \u003cstrong\u003eWhat is the service temperature range?\u003c\/strong\u003e Typical service ranges suit most building environments. Avoid direct flame or extreme heat.\u003cbr\u003e\n  \u003cstrong\u003eHow do I remove cured material?\u003c\/strong\u003e Mechanical methods are usually required. Work carefully to avoid damaging surrounding finishes.\u003c\/p\u003e\n\n  \u003ch3\u003eWhy buy from Glues Australia\u003c\/h3\u003e\n  \u003cp\u003eWe curate a focused range so you can choose faster and build better. Every product listing includes practical how to detail, compatibility guidance, and straightforward support from a team that understands trade requirements. Order with confidence and get your project moving.\u003c\/p\u003e\n\u003c\/div\u003e\n","brand":"Dunlop","offers":[{"title":"Default Title","offer_id":52764020965742,"sku":"GA9315021022704","price":23.25,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/files\/d6f8fed165d94db7a28a68d37c962245.jpg?v=1760680876"},{"product_id":"dunlop-mastic-multipurpose-tile-adhesive-5kg","title":"Dunlop Mastic Multipurpose Tile Adhesive 5kg","description":"\u003cdiv class=\"pa-product-description\"\u003e\n\u003ch2\u003eDunlop Mastic Multipurpose Tile Adhesive\u003c\/h2\u003e\n\u003cp\u003eHigh performance, cementitious, non-slump tile adhesive designed for walls and floors. Combines the ease of a mastic with the strength of a cement-based adhesive for reliable results on small to large format tiles.\u003c\/p\u003e\n\u003ch3\u003eWhy choose it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNon-slump hold\u003c\/strong\u003e for heavy and large format tiles\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndoor and outdoor\u003c\/strong\u003e use on approved substrates\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtended open time\u003c\/strong\u003e of up to 30 minutes to position tiles\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed thickness\u003c\/strong\u003e up to 10 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhite colour\u003c\/strong\u003e for use under light or translucent tiles\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClassification\u003c\/strong\u003e: C2TES1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSuitable tiles\u003c\/h3\u003e\n\u003cp\u003eCeramic, porcelain, mosaics, natural stone that is not moisture sensitive, fully vitrified and translucent tiles.\u003c\/p\u003e\n\u003ch3\u003eSuitable substrates\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRender, screeds, concrete\u003c\/li\u003e\n\u003cli\u003ePlasterboard, fibre cement sheet walls, compressed fibre cement sheet floors\u003c\/li\u003e\n\u003cli\u003eCeramic tile underlay\u003c\/li\u003e\n\u003cli\u003eExisting ceramic tiles indoors (properly prepared)\u003c\/li\u003e\n\u003cli\u003eDunlop undertile waterproofing membranes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhere it excels\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWalls needing strong initial grab\u003c\/li\u003e\n\u003cli\u003eFloors requiring reliable coverage and non-slump\u003c\/li\u003e\n\u003cli\u003eLarge format and deeply keyed tiles where full contact is critical\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCoverage guide\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6 mm notch (walls)\u003c\/strong\u003e: about 0.5 m² per kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10 mm notch (floors)\u003c\/strong\u003e: about 0.3 m² per kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5 kg bag\u003c\/strong\u003e: up to ~2 m² on walls or ~1.2 m² on floors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e20 kg bag\u003c\/strong\u003e: up to ~10 m² on walls or ~6 m² on floors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSet and grout times\u003c\/h3\u003e\n\u003cp\u003eAllow approximately 24 hours at 23°C and 50% RH before grouting and light foot traffic. Dense tiles, cool weather or humid conditions may extend set time.\u003c\/p\u003e\n\u003ch3\u003eMixing\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e20 kg bag\u003c\/strong\u003e: 6 to 6.5 L of clean water\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5 kg bag\u003c\/strong\u003e: 1.5 to 1.75 L of clean water\u003c\/li\u003e\n\u003cli\u003eMix to a creamy consistency, stand for 5 minutes, then re-mix before use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplication tips\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFollow AS 3958 best practice\u003c\/li\u003e\n\u003cli\u003eSpread only as much adhesive as can be tiled within the open time\u003c\/li\u003e\n\u003cli\u003ePress and slide tiles at right angles to the notches to achieve full contact\u003c\/li\u003e\n\u003cli\u003eBack-butter large or deeply keyed tiles for 100% coverage\u003c\/li\u003e\n\u003cli\u003eRemove squeeze-out from joints before setting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eNot suitable for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMoisture sensitive natural stone\u003c\/li\u003e\n\u003cli\u003eAreas under permanent water immersion such as pools\u003c\/li\u003e\n\u003cli\u003eTimber, metal or any substrates subject to movement\u003c\/li\u003e\n\u003cli\u003eApplication below 5°C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSizes\u003c\/h3\u003e\n\u003cp\u003e5 kg and 20 kg bags.\u003c\/p\u003e\n\u003ch3\u003eClean up\u003c\/h3\u003e\n\u003cp\u003eClean tools with water immediately after use.\u003c\/p\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eWear gloves and eye protection. Avoid inhaling dust. Refer to the product SDS and follow all safety directions.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Dunlop","offers":[{"title":"Default Title","offer_id":52764021195118,"sku":"GA9315021022681","price":21.05,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/files\/848fde2e40f4454baeb4ee84bdc0af58.jpg?v=1760680885"},{"product_id":"dunlop-trade-resaflex-rapidset-tile-adhesive-5kg","title":"Dunlop Trade Resaflex Rapidset Tile Adhesive 5kg","description":"\n\u003cdiv class=\"product-copy\"\u003e\n  \u003ch2\u003eDunlop Trade Resaflex Rapidset Tile Adhesive  5 kg\u003c\/h2\u003e\n  \u003cp\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003cbr\u003e\n  Dunlop Trade Resaflex Rapidset Tile Adhesive  5 kg is a high quality tile adhesive designed to deliver consistent, reliable bonding performance for trade professionals and serious DIYers. It is formulated for dependable adhesion, easy application, and clean finishing so you can complete jobs with confidence and minimal rework.\u003c\/p\u003e\n\n  \u003ch3\u003eWhy choose this product\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eReliable bond performance supported by proven chemistry and rigorous quality control.\u003c\/li\u003e\n    \u003cli\u003eSmooth, predictable application that helps reduce mess and cleanup time.\u003c\/li\u003e\n    \u003cli\u003eVersatile adhesion profile suited to a wide range of substrates and project types.\u003c\/li\u003e\n    \u003cli\u003eClear guidance on surface preparation, application method, and curing to help achieve the best possible result.\u003c\/li\u003e\n    \u003cli\u003eSuitable for residential fit-outs, maintenance, repairs, and light commercial projects.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eSuitable materials\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eceramic tiles\u003c\/li\u003e\n\u003cli\u003eporcelain tiles\u003c\/li\u003e\n\u003cli\u003emosaics\u003c\/li\u003e\n\u003cli\u003estone suitable for porous adhesives\u003c\/li\u003e\n\u003cli\u003emost interior substrates\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eTypical applications\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eGeneral installation, repair, and maintenance where a durable bond is required.\u003c\/li\u003e\n    \u003cli\u003eInterior work that benefits from a neat finish and tidy joints.\u003c\/li\u003e\n    \u003cli\u003eProjects where dependable initial grab and high final strength are important.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eSurface preparation\u003c\/h3\u003e\n  \u003cp\u003eEnsure all surfaces are clean, sound, and dry. Remove dust, oil, release agents, laitance, and any loose or flaky material. For dense or non-porous surfaces, light abrasion improves key. Test adhesion on a small area if you are unsure about compatibility. Observe local safety requirements when sanding or cutting.\u003c\/p\u003e\n\n  \u003ch3\u003eApplication\u003c\/h3\u003e\n  \u003col\u003e\n    \u003cli\u003eCheck ambient and substrate temperature. Ideal application between 10°C and 30°C. Protect from freezing and rapid drying.\u003c\/li\u003e\n    \u003cli\u003eCut the nozzle to the required bead size or prepare the container according to the product type.\u003c\/li\u003e\n    \u003cli\u003eApply an even bead or spread with a suitable trowel where required. Avoid trapping air.\u003c\/li\u003e\n    \u003cli\u003ePress the materials together, ensuring full contact. For sheet goods, roll firmly to promote transfer and wetting.\u003c\/li\u003e\n    \u003cli\u003eSupport, clamp, or brace as needed until the adhesive develops sufficient handling strength.\u003c\/li\u003e\n  \u003c\/ol\u003e\n\n  \u003ch3\u003eCure and working time\u003c\/h3\u003e\n  \u003cp\u003ePot life and open time vary by product. Typically, tiles can be adjusted within minutes. Grouting commonly permitted after 24 hours under standard conditions. Cooler temperatures and high humidity will slow curing, while warmer, drier conditions accelerate it. Do not load or finish until the bond has developed adequate strength. Always follow best practice for ventilation and safe handling during cure.\u003c\/p\u003e\n\n  \u003ch3\u003eCoverage\u003c\/h3\u003e\n  \u003cp\u003eCoverage varies based on substrate profile, bead size, and installation method. As a guide, a 300 ml cartridge with a 6 mm round bead can lay several linear meters. For trowel applied adhesives, a notched trowel pattern will influence yield. Plan to have extra on hand for porous or uneven surfaces.\u003c\/p\u003e\n\n  \u003ch3\u003eLimitations\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eDo not apply to surfaces that are visibly wet unless the product specifically allows damp application.\u003c\/li\u003e\n    \u003cli\u003eAvoid continuous water immersion unless the product is rated for that exposure.\u003c\/li\u003e\n    \u003cli\u003eNot all plastics are compatible; test on polypropylene, polyethylene, and PTFE if required.\u003c\/li\u003e\n    \u003cli\u003eObserve maximum service temperature and any movement or vibration limits appropriate to the application.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eClean up\u003c\/h3\u003e\n  \u003cp\u003eClean excess adhesive from tile faces immediately with a damp sponge. Hardened material must be removed mechanically. Always read the product label and follow local regulations for disposal of leftover material and containers.\u003c\/p\u003e\n\n  \u003ch3\u003eSafety\u003c\/h3\u003e\n  \u003cp\u003eRead the label before use and keep out of reach of children. Use in a well ventilated area. Wear protective gloves and eye protection. If on skin, wash with soap and water. If in eyes, rinse cautiously and seek medical advice if irritation persists. Do not ingest. Refer to the product Safety Data Sheet for detailed information.\u003c\/p\u003e\n\n  \u003ch3\u003eStorage\u003c\/h3\u003e\n  \u003cp\u003eStore upright in a cool, dry place away from direct sunlight and heat sources. Keep the cap or nozzle tightly closed when not in use. Do not allow to freeze unless the product literature states it is freeze-thaw stable. Rotate stock to use older product first.\u003c\/p\u003e\n\n  \u003ch3\u003eTroubleshooting\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePoor adhesion:\u003c\/strong\u003e Check surface prep, remove contaminants, and reapply with firm pressure.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSlow cure:\u003c\/strong\u003e Verify temperature and humidity. Increase airflow or allow more time.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eExcess squeeze-out:\u003c\/strong\u003e Reduce bead size or spread more evenly. Clean residue before it skins.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n  \u003cp\u003e\u003cstrong\u003eCan I paint over it?\u003c\/strong\u003e Many adhesives can be overcoated once cured. Test a small area with your paint system first.\u003cbr\u003e\n  \u003cstrong\u003eIs it suitable outdoors?\u003c\/strong\u003e Check the product label for outdoor rating. Protect fresh adhesive from rain until cured.\u003cbr\u003e\n  \u003cstrong\u003eWhat is the service temperature range?\u003c\/strong\u003e Typical service ranges suit most building environments. Avoid direct flame or extreme heat.\u003cbr\u003e\n  \u003cstrong\u003eHow do I remove cured material?\u003c\/strong\u003e Mechanical methods are usually required. Work carefully to avoid damaging surrounding finishes.\u003c\/p\u003e\n\n  \u003ch3\u003eWhy buy from Glues Australia\u003c\/h3\u003e\n  \u003cp\u003eWe curate a focused range so you can choose faster and build better. Every product listing includes practical how to detail, compatibility guidance, and straightforward support from a team that understands trade requirements. Order with confidence and get your project moving.\u003c\/p\u003e\n\u003c\/div\u003e\n","brand":"Dunlop","offers":[{"title":"Default Title","offer_id":52764021227886,"sku":"GA9315021121421","price":23.94,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/files\/c749d578675144c89e5c342aca3cd0d3.png?v=1760680887"},{"product_id":"davco-ceramacrete-cement-base-tile-adhesive-5kg","title":"Davco Ceramacrete Cement Base Tile Adhesive 5kg","description":"\u003cdiv class=\"pa-product\"\u003e\n\u003ch2\u003eDavco Ceramacrete Cement Base Tile Adhesive 5kg\u003c\/h2\u003e\n\u003cp\u003eDavco Ceramacrete is a cement based tile adhesive for rigid substrates with patented Dust Less technology that reduces airborne dust during mixing. It offers good bond strength, tidy mixing and clean up, and can be used in thin or thick beds for efficient tiling results.\u003c\/p\u003e\n\u003ch3\u003eWhere to Use\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInterior and exterior walls and floors\u003c\/li\u003e\n\u003cli\u003eBathrooms, showers, kitchens, laundries, living areas, balconies and patios\u003c\/li\u003e\n\u003cli\u003eDomestic and light duty commercial projects\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTile Types\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCeramic\u003c\/li\u003e\n\u003cli\u003eMosaic\u003c\/li\u003e\n\u003cli\u003eTerracotta\u003c\/li\u003e\n\u003cli\u003eSlate\u003c\/li\u003e\n\u003cli\u003eQuarry tiles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for\u003c\/strong\u003e natural stone.\u003c\/p\u003e\n\u003ch3\u003eSuitable Substrates\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eConcrete\u003c\/li\u003e\n\u003cli\u003eCement based screeds and renders\u003c\/li\u003e\n\u003cli\u003eRendered block or brickwork\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor flexible framed substrates or submerged applications such as pools and spas, use with Davco Davelastic additive as directed.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDust Less formula for less mess and faster clean up\u003c\/li\u003e\n\u003cli\u003eGood bond strength\u003c\/li\u003e\n\u003cli\u003eUsable for thin bed and thick bed tiling\u003c\/li\u003e\n\u003cli\u003eColour varies from white to grey\u003c\/li\u003e\n\u003cli\u003eLow VOC 5 g\/L\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMixing and Application\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMixing ratio\u003c\/strong\u003e 1.25 L of clean cool water per 5 kg bag\u003c\/li\u003e\n\u003cli\u003eAllow to stand for 5 minutes after mixing, then remix before use\u003c\/li\u003e\n\u003cli\u003eDo not add extra water after initial mixing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorking Times at 23°C and 50% RH\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePot life\u003c\/strong\u003e 40 minutes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOpen time\u003c\/strong\u003e 7 minutes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustability time\u003c\/strong\u003e 15 minutes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eReady for Use\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrouting\u003c\/strong\u003e after 24 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReturn to dry area service\u003c\/strong\u003e after 24 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReturn to wet area service\u003c\/strong\u003e after 7 days\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePreparation Tips\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEnsure substrates are sound, clean, dry and free from contaminants\u003c\/li\u003e\n\u003cli\u003ePrime as required according to substrate condition and primer directions\u003c\/li\u003e\n\u003cli\u003eInstall movement joints in line with good tiling practice\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eClean Up and Safety\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eClean tools with water before the adhesive dries\u003c\/li\u003e\n\u003cli\u003eUse appropriate personal protective equipment\u003c\/li\u003e\n\u003cli\u003eRefer to the product SDS for detailed safety advice\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e","brand":"Davco","offers":[{"title":"Default Title","offer_id":52764021260654,"sku":"GA9312095473036","price":10.3,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/files\/d6a3754c090f4dec81734d3b3fa9e5af.jpg?v=1760680889"},{"product_id":"dunlop-trade-resaflex-rapidset-tile-adhesive-15kg","title":"Dunlop Trade Resaflex Rapidset Tile Adhesive 15kg","description":"\u003cp\u003e\u003cstrong\u003eDunlop Trade Resaflex Rapidset Tile Adhesive 15kg\u003c\/strong\u003e is a high quality, fast setting, rubber modified cement-based adhesive designed for rapid installation and early grouting. It delivers strong adhesion on walls and floors and is suitable for interior applications and exterior areas with satisfactory drainage.\u003c\/p\u003e\n\u003ch3\u003eKey benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eReady to grout in about 3 hours at 23°C and 50% RH\u003c\/li\u003e\n\u003cli\u003eRubber modified formulation for strong bond and improved workability\u003c\/li\u003e\n\u003cli\u003eClassified C1FES1\u003c\/li\u003e\n\u003cli\u003eSuitable bed thickness from 1.5 mm up to 10 mm\u003c\/li\u003e\n\u003cli\u003eWall and floor use, interior and exterior (with correct falls and drainage)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSuitable tiles\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCeramic, porcelain, vitrified and mosaics\u003c\/li\u003e\n\u003cli\u003eNon moisture sensitive stone\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSuitable substrates\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRender, plasterboard, fibre cement sheet walls\u003c\/li\u003e\n\u003cli\u003eCompressed fibre cement sheet floors, concrete floors\u003c\/li\u003e\n\u003cli\u003eExisting tiles for interior applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMixing and use\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater addition\u003c\/strong\u003e: 5.5 L to 6.0 L per 15 kg bag\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePot life\u003c\/strong\u003e: about 40 minutes at 23°C and 50% RH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrowel guidance\u003c\/strong\u003e: 6 x 6 x 6 mm on walls to achieve about 1.5 mm bed. 10 x 10 x 10 mm on floors to achieve about 2.5 mm bed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBack buttering\u003c\/strong\u003e recommended for deeply keyed tiles and tiles larger than 450 mm on any edge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrouting\u003c\/strong\u003e: typically after about 3 hours at 23°C and 50% RH\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCoverage guide\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eTrowel size\u003c\/th\u003e\n\u003cth\u003eApproximate coverage\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e6 mm\u003c\/td\u003e\n\u003ctd\u003eAbout 0.6 m² per kg (about 9 m² per 15 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e10 mm\u003c\/td\u003e\n\u003ctd\u003eAbout 0.4 m² per kg (about 6 m² per 15 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eMovement joints\u003c\/h3\u003e\n\u003cp\u003eInclude movement joints in line with AS 3958 and around perimeters, penetrations and changes in direction. Fill with a suitable flexible sealant.\u003c\/p\u003e\n\u003ch3\u003eClean up\u003c\/h3\u003e\n\u003cp\u003eClean tools and residue with water while the adhesive is wet.\u003c\/p\u003e\n\u003ch3\u003eLimitations\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNot suitable for continuous immersion such as swimming pools\u003c\/li\u003e\n\u003cli\u003eNot for moisture sensitive or translucent stone\u003c\/li\u003e\n\u003cli\u003eDo not tile directly over timber floors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eWear gloves, eye and face protection. Avoid breathing dust. In case of contact with eyes, rinse with water and seek medical advice. Keep out of reach of children.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eTechnical details are based on manufacturer guidance at standard conditions. Actual times and coverage vary with temperature, humidity, tile and substrate.\u003c\/em\u003e\u003c\/p\u003e","brand":"Dunlop","offers":[{"title":"Default Title","offer_id":52764021981550,"sku":"GA9315021022094","price":56.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/files\/2dac9b72df4e4018a4df15f847f0ecf4.jpg?v=1760680895"},{"product_id":"dunlop-multipurpose-floor-leveller-15kg","title":"Dunlop Multipurpose Floor Leveller 15kg","description":"\u003cp\u003eDunlop Multipurpose Floor Leveller is a cement-based levelling compound from Dunlop Trade (ARDEX Australia) that mixes with water into a smooth, free-flowing material for evening out rough or uneven concrete floors. It flows into low spots and finds its own level, leaving a flat base that is ready for foot traffic in around 2 hours and ready for tiles in about 4 hours, making it a dependable first step before laying new floor coverings such as carpet, vinyl or ceramic tiles.\u003c\/p\u003e\u003ch3\u003eWhere to use it\u003c\/h3\u003e\u003cp\u003eSuitable for indoor and outdoor use over sound concrete floors, including living areas, kitchens, laundries and covered patios. It can also be used to form ramps or for bulk filling. It is designed for concrete substrates only and must always be covered by a finished floor covering.\u003c\/p\u003e\u003ch3\u003eHow to use\u003c\/h3\u003e\u003cp\u003ePrepare the slab so it is clean, sound and free of dust or contaminants, and prime porous surfaces. Slowly add the powder to clean water while mixing with a low-speed paddle mixer for 2-3 minutes until lump free. Pour onto the floor, spread with a trowel and allow it to self-smooth. Apply up to 25mm in one application, adding 2-5mm aggregate for beds thicker than about 10mm.\u003c\/p\u003e\u003ch3\u003eImportant notes\u003c\/h3\u003e\u003cp\u003eNot suitable for driveways or areas with vehicle traffic, and it cannot be left exposed as a wear surface. Sand can be added to create a trowelable screed for ramping. Always follow the technical datasheet for priming and mixing details.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSize\u003c\/td\u003e\n\u003ctd\u003e15kg bag\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoverage\u003c\/td\u003e\n\u003ctd\u003eApprox. 1.6kg\/m² per mm (about 9m² at 1mm per bag)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThickness\u003c\/td\u003e\n\u003ctd\u003eUp to 25mm per application\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSubstrates\u003c\/td\u003e\n\u003ctd\u003eConcrete\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWalk-on time\u003c\/td\u003e\n\u003ctd\u003e2 hours (tiles after 4 hours)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eSafety\u003c\/h3\u003e\u003cp\u003eCement-based powders are alkaline and can irritate skin, eyes and airways. Wear gloves, safety glasses and a P2 dust mask when mixing, work in a ventilated area, wash skin after use and keep out of reach of children.\u003c\/p\u003e","brand":"Dunlop","offers":[{"title":"Default Title","offer_id":54245862539630,"sku":"GA9315021021325","price":69.96,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/files\/Multipurpose-Floor-Leveller-15kg-bag.jpg?v=1783054822"},{"product_id":"dunlop-ardit-floor-leveller-20kg","title":"Dunlop Ardit Floor Leveller 20kg","description":"\u003cp\u003eDunlop Ardit Floor Leveller is a premium cement-based levelling compound built on the renowned Ardit Technology from ARDEX. It offers superior flow and workability, spreading easily across uneven concrete to create a smooth, even surface before new floor coverings go down. Floors are walkable in around 3 hours and ready for ceramic tiles in the same timeframe, keeping renovation and re-flooring jobs moving quickly.\u003c\/p\u003e\u003ch3\u003eWhere to use it\u003c\/h3\u003e\u003cp\u003eUse indoors and outdoors under covered areas over sound concrete floors, ahead of ceramic tiles, carpet or vinyl. It is designed for concrete substrates only and must be protected by a floor covering rather than left exposed to the weather or used as a finished wear surface.\u003c\/p\u003e\u003ch3\u003eHow to use\u003c\/h3\u003e\u003cp\u003eEnsure the slab is clean, sound and primed as required. Mix each 20kg bag with approximately 4.5L of clean water using a low-speed paddle mixer until smooth and lump free. Pour and spread with a trowel, letting the compound flow out and level itself. Apply from a thin skim up to 25mm in one pass, adding 2-5mm aggregate for deeper fills.\u003c\/p\u003e\u003ch3\u003eImportant notes\u003c\/h3\u003e\u003cp\u003eNot suitable for driveways or areas subject to vehicular traffic. Vinyl and carpet can be laid after about 24 hours, while tiles can go down after roughly 3 hours. Refer to the technical datasheet for priming guidance on porous slabs.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSize\u003c\/td\u003e\n\u003ctd\u003e20kg bag\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoverage\u003c\/td\u003e\n\u003ctd\u003eApprox. 12m² at 1mm or 4m² at 3mm per bag\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThickness\u003c\/td\u003e\n\u003ctd\u003e1-25mm per application\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSubstrates\u003c\/td\u003e\n\u003ctd\u003eConcrete\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWalk-on time\u003c\/td\u003e\n\u003ctd\u003e3 hours (tiles 3 hours; vinyl and carpet 24 hours)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eSafety\u003c\/h3\u003e\u003cp\u003eContains cement, which is alkaline when wet. Wear gloves, eye protection and a P2 dust mask while mixing, ensure good ventilation, avoid skin contact and rinse promptly if the mix touches skin or eyes. Store away from children.\u003c\/p\u003e","brand":"Dunlop","offers":[{"title":"Default Title","offer_id":54245862670702,"sku":"GA9315021022179","price":67.45,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/files\/179f3d9a-6b34-43bc-a775-ed5e151a251b.png?v=1783139903"},{"product_id":"dunlop-ardit-rapidset-repair-mortar-5kg","title":"Dunlop Ardit Rapidset Repair Mortar 5kg","description":"\u003cp\u003eDunlop Ardit Rapidset Repair Mortar is an extremely fast-hardening construction mortar from Dunlop Trade (ARDEX Australia), formulated for patching cracks, holes and damaged sections with minimal downtime. Repairs can take foot traffic after just 45 minutes and accept floor coverings after 1 hour, so a morning patch job doesn't hold up the rest of the day's work.\u003c\/p\u003e\u003ch3\u003eWhere to use it\u003c\/h3\u003e\u003cp\u003eSuitable for indoor and outdoor repairs on concrete, render, screeds, masonry, plasterboard, timber and fibre-cement sheet. It is handy for patching floors before coverings, forming small ramps, and tidying up around doors, windows and plumbing penetrations internally.\u003c\/p\u003e\u003ch3\u003eHow to use\u003c\/h3\u003e\u003cp\u003eClean out the damaged area so it is sound and dust free. Mix the powder with clean water (approximately 1.5L per 5kg) to a smooth, workable consistency and apply firmly with a trowel, compacting into the repair. It can be worked from a feather edge up to 20mm thick and shaped before it stiffens. Work in small batches, as the working time is around 15 minutes.\u003c\/p\u003e\u003ch3\u003eImportant notes\u003c\/h3\u003e\u003cp\u003eOnly mix what you can place within the working time. Deeper repairs can be built up in stages. Backed by a 10 year guarantee when used as directed - see the technical datasheet for full details.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSize\u003c\/td\u003e\n\u003ctd\u003e5kg bag\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoverage\u003c\/td\u003e\n\u003ctd\u003eVaries with patch depth; feather edge to any thickness\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThickness\u003c\/td\u003e\n\u003ctd\u003eFeather edge up to 20mm per application\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSubstrates\u003c\/td\u003e\n\u003ctd\u003eConcrete, render, screeds, masonry, plasterboard, timber, fibre-cement\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWalk-on time\u003c\/td\u003e\n\u003ctd\u003e45 minutes (floor coverings after 1 hour)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eSafety\u003c\/h3\u003e\u003cp\u003eCement-based powder - wear gloves, safety glasses and a P2 dust mask when mixing, keep the area ventilated and avoid prolonged skin contact with the wet mortar. Wash hands after use and keep away from children.\u003c\/p\u003e","brand":"Dunlop","offers":[{"title":"Default Title","offer_id":54245862736238,"sku":"GA9315021022339","price":35.86,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/files\/587ce310-eccd-498c-9ee0-1b39c929baad.jpg?v=1783139962"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/collections\/unnamed_60.png?v=1756339715","url":"https:\/\/gluesaustralia.com.au\/collections\/cementitious.oembed?page=2","provider":"Glues Australia","version":"1.0","type":"link"}