In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Flexiseal FC is a fast curing polyurethane Adhesive and Sealant with high flexibility and excellent adhesion. Waterproof+, suitable for indoor and outdoor applications^, paintable after it has cured.
Best for : Common building materials such as concrete, brick, masonry, ceramic tile, metals, softwood, hardwood and some plastics*.
Product Details
Where can this product be used?
External wall and cladding joints
Weatherproofing joints between brickwork, masonry, wood concrete or metal frames
Joints in walls, balconies, around window or door frames
Joints in bridge and balcony parapets
Retaining walls
Roofing
Acoustic rated walls
What materials is this product suitable for?
Common building materials such as concrete, brick, masonry, ceramic tile, metals, softwood, hardwood and some plastics*.
*Will not adhere to PE, PP or PTFE–test other plastics and rubber first.
How to Use
AS AN ADHESIVE: Apply a bead or small blobs on surface. Assemble parts together and clamp firmly to hold until cured. Remove excess immediately. Initial bond achieved in 24 hours depending on temperature and humidity. Bond strength increases over a few days.
AS A SEALANT: Extrude sealant into the joint ensuring full contact with the sides of joint. Avoid entrapment of air. Smooth sealant with spatula forcing it into the joint. For best performance, install joint backing rod (polyethylene or polyurethane foam rod) in the joint to control depth and ensure joint movement. Suitable for +/- 25% joint movement. Complies with ISO11600/F/25HM.
Limitations:
*Will not adhere to PE, PP or PTFE–test other plastics and rubber first.
^To maximise durability in outdoor applications paint with a suitable exterior paint. Some colours may discolour after exposure to UV radiation.
+Not suitable for permanent water immersion or below water line use.
Clean Up
Mineral turps. Cured product can only be removed mechanically
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Selleys Brick and Concrete Silicone is a neutral (non-corrosive) cure 100% silicone sealant. It is low modulus or can be stretched easily, which makes it ideal for joints which will move significantly such as expansion joints in concrete, and is grey so it will blend in with the concrete surrounds.
Features
Superior flexibility +/- 25% movement capability & up to 500% elongation or stretch.
Superior silicone formulation forms a durable seal which locks out water and which does not shrink when drying.
UV and weather resistant – Immune to the damaging effects of the sun.
Temperature resistance – approximately -60°C +150°C.
Superior adhesion to concrete and fibre cement surfaces.
Low odour so can be used in any environment without discomfort.
25 year guarantee – when used as directed, i.e. for private use and within 12 months of purchase, the product is guaranteed against crumbling, cracking or drying.
Colour
Grey
Appearance
Smooth
Where can this product be used?
joints in brick walls
expansion joints in concrete
Perfect for use on or around:
Walls
Patios
Floors
Fencing
Windows
Expansion joints in concrete.
Can not be painted over.
Not suitable for use in below waterline applications.
Do not use in below ground applications.
Not for use on polyethylene, polypropylene or Teflon. Pre-test plastics before use.
What materials is this product suitable for?
Bricks and mortar
Ceramics and porcelain
Concrete
Fibre cement
Marble & stone
Metal
Wood
Many plastics including polystyrene
How to use this product
Throughly clean and dry surface from oil, dirt and grease with Mineral Turpentine firstly and then Methylated Spirits. Allow to dry completely before applying silicone. If there old silicone which needs to be removed, we recommend using SELLEYS SILICONE REMOVER, this ingenous product makes removing old silicone easy.
We also recommend sanding the surface back with a good quality sanding block, such as a ROTA COTA Sanding Block Medium/Course grain, as the silicone will adhere more readily to a scratched up surface.
Ensure you tape both sides of the gap before applying the product. This ensures a neat finish and makes it easier to clean up.
Cut the seal at the top of the cartridge and cut the nozzle at a 45° angle, to the size of the gap opening. Fit the nozzle to the top of the cartridge.
Insert the cartridge into a caulking gun such as SELLEYS LIGHT SPEED Caulking gun. We recommend SELLEYS LIGHT SPEED Caulking Gun, as its new innovative pressure release design reduces the mess which results from run on and stress on your hands, which is critical if you are doing a lot of sealing.
Hold the caulking gun at a 45° angle. Press the nozzle opening against the joint, apply steady pressure to the caulking gun and extrude the silicone sealant forcing the sealant into the gap and move in a pushing motion, along the joint in one smooth action.
For a smooth finish, smooth with a finger dipped in mineral turpetine or for a professional finish use a paint scraper such as a 50mm ROTA COTA Soft Grip Scraper dipped in mineral turpetine.
Excess sealant must be cleaned up before the sealant skins in 5-10 minutes. Wipe excess away with a cloth dampened in mineral turpetine or use a SELLEYS Hand Kleen Wipes. Remove tape before the sealant skins. Clean tools immediately in mineral turpetine.
Avoid smearing on surrounding surfaces, see a handy tip.
The sealant will cure fully in 72 hours. As this point, any unwanted sealant can be removed by trimming with a sharp blade but avoid undercutting the seal.
Handy tips
Tips for Using a Brick & Concrete Silicone Sealant
Ensure you tape both sides of the gap before applying the product. This ensures a neat finish and makes it easier to clean up.
When first applying product, extrude a small amount onto a piece of scrap material to ensure a smooth continuous flow of silicone sealant.
Remove the tape before the silicone sealant skins.
For a better finish complete painting prior to use of the sealant as it can not be painted over.
For a better finish, use a spatula dipped in mineral turpentine or detergent and water to tool off the sealant.
Work in sections that can be completed before sealant skins. Tooling off and tape removal must be completed before skinning occurs or a rough surface may result, so working in sections allows for a better finish.
Keep a pack of SELLEYS Hand Kleen Wipes handy to wipe up any spills and for cleaning any material off the skin before it cures. They are an easy and effective way to keep clean on the job.
Safety tips
Uncured product may irritate eyes. If in eyes, flood the eyes for at least 15 minutes and seek medical advice.
Avoid contact with skin, if contact occurs, wipe off immediately and wash with detergent. It may irritate sensitive skin.
Avoid breathing in vapours.
Ensure you use a well-ventilated area as product releases methyl ethyl ketoxime while curing.
Keep away from children.
Storage and re-use
Store in cool dry conditions, below 30°C
The sealant should be used within 6 months after opening.
After use keep the nozzle on the cartridge
Silicone is a reactive product and is designed to cure once exposed to humidity. While the product may be stored for a few months once opened, it does have a limited shelf life. Storage in an upright position in a cool dry place is recommended to maximise the storage life.
If the sealant is going to be used again within a few days, leave the nozzle on and merely extrude approximately 2 cm of product before storing the cartridge upright. This will cure to a plug which can easily be pulled out when required.
For longer storage periods, leave the nozzle on and place a piece of plasticene or Blu Tack over the end of the nozzle. Tightly tape a piece of aluminium foil over the whole nozzle to exclude any air.
When you want to re-use the product, simply take off the foil and plug from the old nozzle pull out the excess silicone from the nozzle with a corkscrew, then re-pierce any cure at the tip of the cartridge and re-use.
If cure has taken place into the cartridge, the product is unlikely to be in a useable state and should be discarded.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Selleys Marine Flex is a high-performance adhesive and sealant designed for marine and water-exposed applications. Using Sil-X advanced polymer technology, it provides a permanent watertight seal above and below the waterline, even in salt, fresh, or chlorinated water.
Key Features
Cures and bonds underwater
No primer required for most surfaces
Strong and flexible bond absorbs vibration and movement
Solvent-free and isocyanate-free formulation
Sandable once cured
10-year watertight seal guarantee (above waterline)
Where to Use
Ideal for marine, pool, spa, and construction projects where water exposure or movement is expected. Suitable for bonding and sealing:
Boat hulls, fittings, and deck seams
Pool tiles, coping, and skimmer boxes
Concrete, fibreglass, sealed timber, and metal surfaces
Glass, ceramics, and most rigid plastics
Technical Details
Technology
Sil-X advanced polymer
Colour
White or Black
Size
410g cartridge
Finish
Smooth, paintable once cured
How to Apply
Ensure surfaces are clean and free from grease, oil, or dust. Can be applied to damp or wet surfaces.
Cut the nozzle to the desired bead size and apply using a standard caulking gun.
Tool the sealant immediately with a soapy water solution before it begins to skin.
Allow to cure fully before sanding or painting if required.
Limitations
Not suitable for polyethylene (PE), polypropylene (PP), or PTFE materials
Gelcoat surfaces should be lightly sanded before application
The watertight guarantee applies to applications above the waterline
Why Choose Selleys Marine Flex
When you need a sealant that can withstand constant water exposure, movement, and vibration, Selleys Marine Flex delivers unmatched reliability. It bonds powerfully, stays flexible, and ensures a lasting waterproof finish for marine, pool, or construction applications.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Selleys ArmourFlex provides superior strength with instant grab and more flexibility than conventional adhesive/sealants.
Features
Superior strength & instant grab
No primer required
Watertight seal with a 10-year guarantee*
Can be applied to wet or damp surfaces with excellent adhesion
Non-bubbling
Better curing and extrudability (>5°C)
Easily paintable with 2 coats of water-based paints after product skins in 60 to 90 minutes
Sandable
Low VOC**
Long-lasting flexibility
Fast curing
No slump
Trafficable
Potable water approved AS/NZS4020 (Area to volume ratios
**Meets GBCA limits for general purpose and architectural sealants.
Where can this product be used?
Skylights
Walls
Patios
Floors
Fencing
Windows
Expanding joints in concrete
What materials is this product suitable for?
Concrete
Timber
Metals
Cement sheeting
Brick
Plasterboard
Ceramic tiles
Fibreglass
Most plastics (Pre-test before use. Not for polyethylene, polypropylene or Teflon.)
Ensure substrates are clean and free of oil, grease or loose particles.
Cut seal and nozzle and fit to cartridge, then place in caulking gun.
Hold caulking gun at 45° angle and gun sealant ahead of nozzle ensuring product is pushed into joint.
For neat joints, use masking tape on both sides of the joint and remove before skinning.
Tool with a soapy solution before skinning occurs.
For optimal joint design, use non-absorbent backing material (e.g. polyethylene backer rod) and appropriate joint width/depth. See technical data sheet for more information.
Limitations:
Not suitable on polyethylene, polypropylene or Teflon.
Not for permanent water immersion or below water-line use.
In dry conditions, surfaces can be misted with water to speed up cure.
Paint with water-based paint. A minimum of two coats are necessary to ensure proper wetting out the sealant surface
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Selleys 655 FC Crystal Clear Flexible Adhesive and Sealant 290 mL
Premium 100 percent crystal clear hybrid adhesive and sealant that delivers superior strength, instant grab, and long lasting flexibility. Bonds and seals on most common building materials, works indoors and outdoors, and can be applied to wet or damp surfaces. Low VOC, non yellowing, paintable, and non slumping for neat vertical and overhead joints up to 20 mm.
Why you will love it
Superior strength with instant grab
Primerless adhesion on most surfaces
Applies to wet or damp substrates
Fast curing with non slumping finish
Crystal clear appearance that stays clear
Low VOC and isocyanate free
Paintable with water based paints
Suitable for interior and exterior use
Where it works
Ideal for sealing, bonding, and filling on concrete, timber, metals, cement sheeting, brick, plaster, ceramic tiles, fiberglass, and most plastics. Not recommended for polyethylene, polypropylene, or PTFE.
Typical applications
Clear sealing of kitchen and laundry splashbacks
Bonding trims, panels, and skirtings
Sealing gaps in windows, door frames, and cladding
General construction and maintenance sealing where a clear finish is desired
How to use
Prepare the surface so it is clean and free from dust, grease, and loose material.
Cut cartridge tip, attach nozzle, and load into a caulking gun. Cut nozzle to the required bead size.
Apply a continuous bead, pressing firmly so the product contacts both sides of the joint. Tool with a soapy solution before skinning.
For neat edges, mask before applying and remove tape before skin forms.
Clean up
Uncured product cleans off with mineral turps.
Once cured, remove by scraping or sanding. A dedicated silicone and adhesive remover can assist.
Good to know
Do not paint with solvent based paints. If painting, first coat with a water based paint.
Not suitable for permanent water immersion or below water line use.
Store below 30°C. Use within 6 months after opening for best results.
Specifications
Technology
Moisture curing silyl modified polymer
Colour
Clear
Pack size
290 mL cartridge
Density
Approx. 1.06 g/mL
Application temperature
5 to 35°C
Tooling time at 23°C and 50 percent RH
About 25 minutes
Skin time at 23°C and 50 percent RH
About 45 to 55 minutes
Cure rate at 23°C and 50 percent RH
Approx. 3 mm per 24 hours
Slump
0 mm
Tensile strength
About 1 MPa
Shore A hardness
30 ± 5
Elongation at break
Approx. 130 percent
Modulus at 100 percent elongation
About 1.0 MPa
Service temperature
0 to 70°C
VOC content
Approx. 35 g/L
Safety
Follow good ventilation and hygiene practices. Refer to the product safety data sheet for detailed advice.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Selleys 650FC: The Ultimate Adhesive Sealant Powered by Advanced Hybrid Technology
Key Features
+/- 20% Joint movement capability
Excellent UV & Weather Resistance
Superior Strength & Instant Grab
Can be applied on damp surfaces
Applications
This product can be used in various applications such as trafficable joints, air conditioning ducting, caravan construction, perimeter seals around doors, windows, and general interior joint sealing.
Compatibility
Highly compatible with most building materials including timber, concrete, metals, and more. Not suitable for PVC, polyethylene, and temperatures above 80°C.
How to Use
Ensure surfaces are clean and dry. Apply using a sealant gun and spread evenly within 10 minutes.
Storage and Cleanup
Store in cool, dry conditions below 30°C. Uncured product can be removed with mineral turps.
Precautions
This product is not suitable for constantly submerged joints or temperatures beyond 80°C.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Silicone 401 RTV is a one part ready to use, acid cure, room temperature vulcanising (RTV), silicone adhesive sealant. It cures rapidly on exposure to atmospheric moisture to form a versatile, durable, resilient silicone rubber. It is available in clear.
Uses
Silicone 401 is suitable for form-in-place gaskets and for adhesive, sealing and electrical insulating applications in manufacturing and plant maintenance.
Technical Features
Wide Temperature Tolerance: Remains permanently flexible under operating temperatures from – 60oC to 205oC, and will tolerate short periods of 260oC
Good Chemical Resistance: Good resistance to most organic and inorganic chemicals, solvents and oils
Primerless Adhesion: Adheres without primer to many metal, glass, ceramic, rigid plastic, rubber painted and wood substrates
Non-toxic: Suitable for incidental food contact in food handling equipment and food contact surfaces
Excellent Weatherability: Excellent resistance to ozone, UV light and ageing
Good Electrical Insulating Properties: Insulating properties are comparable to other insulating rubbers at room temperature, though performs better than many other rubbers at higher temperatures and water has little effect on these properties
Application Tips
Not recommended for use with petrol, distillate and some other hydrocarbon solvents. These can cause softening and swelling which is undesirable in some applications.
Do not use in totally confined joints where sealant is not exposed to atmospheric moisture
Chemical compatibility should be tested for each application under consideration
Cannot be over-painted
Technical Details and Performance
Indicative information only, not to be used for setting specifications.
Typical Application Properties
Consistency
Non – sag, gun grade
Tack Free Time
(25oC, 50% r.h.): 15 – 20 minutes
Skin Forming Time
5 to 10 minutes (depending on weather conditions)
Cure Time
(3mm Section @ 25oC, 50% R.H.): 24 hours
Shrinkage During Curing
Approximately 3.5% by volume
Specific Gravity
1.04
Storage Life
(Below 30oC in original unopened container):12 months
Typical Mechanical Performance Properties (3 day cure @ 25oC, 50% R.H.)
Tensile Strength (MPa)
1.2
Ultimate Elongation %
400
Hardness (Shore A)
25
Tear Strength (N/mm)
5.0
Joint Movement Capability
± 25%
Typical Electrical Properties (at Room Temperature)
Dielectric Strength kv/mm
21
Dielectric Constant @50Hz to 5MHz
2.6-2.8
Dissipation Factor Tan @50Hz-5MHz
20×10-4 to 5×10-4
Volume Resistivity (ohm-cm)
1×1013 (wet 60oC)
1×1014 (dry 23oC)
Typical Thermal Properties
Brittle Point
–60oC
Maximum Continuous Operating Temperatures
205oC
Maximum Intermittent Operating Temperatures
260oC
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
The Selleys 3-in-1 Adhesive, Sealant & Gap Filler is your ultimate all-in-one solution for a wide range of DIY and professional applications. This versatile product combines the power of a strong adhesive, the reliability of a waterproof sealant, and the precision of a gap filler, all in one easy-to-use formula. Whether you're tackling home repairs, sealing joints, or filling cracks, Selleys 3-in-1 ensures a durable, flexible, and weather-resistant finish. Perfect for both indoor and outdoor use, it adheres to a variety of surfaces including wood, metal, glass, and ceramics. With Selleys 3-in-1, you can trust in a product that delivers exceptional results every time, simplifying your projects and saving you time and effort
Where can this product be used?
Use 3 in 1 for sealing, bonding and filling almost any material
damp or dry,inside or outside
Provides a durable waterproof seal
Provides strong bonds and a perfect paintable finish
What materials is this product suitable for?
Glass
Metals
Timber
Brick
Concrete
Tiles
Most plastics (not for polyethylene, polypropylene or teflon)
How to Use
Adhesive
Apply to one surface, in beads for broad surfaces (every 30cm) or dots for small surfaces. Press surfaces together and allow to cure.
Sealant
Apply product, ensuring it is forced into the joint, with good contact to surfaces. Tool with a soap solution before skinning occurs.
Gap Filler
Apply product into gap. Smooth off with spatula dipped in soapy water. Allow to skin before painting with water based paints.
Limitations:
Not recommended for solvent based paints. If required, paint with a water based paint first.
Handy tips
For neater joints, mask sides before applying sealant and remove tape before sealant skins.
Larger, heavier items need to be supported until the adhesive cures.
Paint with water-based paint. A minimum of two coats are necessary to ensure proper wetting out the sealant surface
Clean Up
Uncured product may be removed with mineral turps.
Cured product can be removed by scraping or sanding or with the help of Selleys Silicone Remover.
Size: 480g Cartridge
Colour: White
Technology Sil-X®
Use: Interior & Exterior
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
High initial tack and high strength
White colour
Works with virtually all materials
290ml tube
For professional and DIY use
Power-X is a versatile adhesive and sealant. It is a one-component, high-modulus composition, and it cures under the influence of humidity. It is free from isocyanates and silicones, and perfect if you are in need of an adhesive/sealant with high resistance to aging and weathering, that still maintains a high tack and high adhesion strength.
Used on polystyrene, coachwork, roofing, timber, shipbuilding, DIY, and more. Power-X is a professional series product from the Rite Adhesives range. It has been specially developed for high-quality work.
Power-X is also the ultimate glazing sealant for all your glass surfaces. It’s a premium, high-quality sealant that retains elasticity to ensure a seamless bond between your glass and other surfaces. It also has a durable weatherproof finish, making it perfect for humidity-prone areas, like the kitchen, bathroom, or pool. Plus, it’s super easy to apply.
It is perfect for virtually any sealing, bonding, and filling applications on almost any surface, in interior or exterior settings, making it one of the most versatile products available at Rite Adhesives!
One feature of Power-X is its permanent elasticity. Excellent adhesion in most applications, including as glazing sealant. Works with MDF, brick, and concrete. Also, natural stone, ceramic tiles, and aluminium. Works with metals like steel and stainless steel, brass, zinc, and copper, and most plastics and ABS.
Power-X can be painted with water-based paints and several other systems!
Due to its high flexibility (400% elongation at break!), it will absorb the movement of the materials onto which it is applied.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
A durable, ready to use, acrylic based, flexible filler for filling cracks, holes, dents and splits in weatherboards and other exterior woodwork such as decking and fencing.
Unlike more rigid woodfillers, it flexes with the natural movement of wood and will not crack, split or fall out.
Can be stained, clear-finished, painted, nailed, screwed, sanded or planed.
For use on: Timber (EXTERIOR & INTERIOR)
Fill depth: Up to 10mm
Dries in: 3 hours
Ready to use: YES
Available in: 450g and ^2kg
Colour: Dries to a pine colour
NOTE: Not for permanently wet areas or joints between weatherboards, floorboards, panels etc.
• Ensure surfaces are clean and dry.
• Remove any rotten wood and fix split timber firmly before filling. Priming is unnecessary.
• Apply firmly with filling blade.
• Allow to dry (*2–3 hrs in thin 2–3mm applications depending on humidity).
• For deeper jobs apply in 10mm layers, allowing each layer to dry before applying the rest. Allow longer drying times (24 hours minimum) if painting with oil based paints, for deeper applications or in colder weather.
• Sand back and paint with with a quality exterior water or oil-based paint, or stain and clear finish.
• For a smoother finish allow filler to dry, sand back and apply a very thin coat of filler. Allow this to dry then sand lightly with fine (>300 grit) sandpaper before painting or vanishing.
• Protect from rain until painted over.
• For best results, apply undercoat before applying water or oil based top coat.
• Where joint movement occurs, use a flexible Poly sealant.
• Clean up with water before filler dries.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
A durable, ready to use, acrylic based, flexible filler for filling cracks, holes, dents and splits in weatherboards and other exterior woodwork such as decking and fencing.
Unlike more rigid woodfillers, it flexes with the natural movement of wood and will not crack, split or fall out.
Can be stained, clear-finished, painted, nailed, screwed, sanded or planed.
For use on: Timber (EXTERIOR & INTERIOR)
Fill depth: Up to 10mm
Dries in: 3 hours
Ready to use: YES
Colour: Dries to a pine colour
NOTE: Not for permanently wet areas or joints between weatherboards, floorboards, panels etc.
• Ensure surfaces are clean and dry.
• Remove any rotten wood and fix split timber firmly before filling. Priming is unnecessary.
• Apply firmly with filling blade.
• Allow to dry (*2–3 hrs in thin 2–3mm applications depending on humidity).
• For deeper jobs apply in 10mm layers, allowing each layer to dry before applying the rest. Allow longer drying times (24 hours minimum) if painting with oil based paints, for deeper applications or in colder weather.
• Sand back and paint with with a quality exterior water or oil-based paint, or stain and clear finish.
• For a smoother finish allow filler to dry, sand back and apply a very thin coat of filler. Allow this to dry then sand lightly with fine (>300 grit) sandpaper before painting or vanishing.
• Protect from rain until painted over.
• For best results, apply undercoat before applying water or oil based top coat.
• Where joint movement occurs, use a flexible Poly sealant.
• Clean up with water before filler dries.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Can be used on both interior and exterior substrates
Highly flexible
Non-corrosive
Neutral cure
Parfix Roof, Gutter And Concrete Silicone is a grey, highly flexible, neutral cure sealant designed for both interior and exterior use.
Ideal for use on galvanised iron, concrete and roofing, Parfix Roof, Gutter And Concrete is specially formulated to remain flexible under harsh weather conditions.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Can be used on both interior and exterior substrates
Highly flexible
Non-corrosive
Neutral cure
Parfix Roof, Gutter And Concrete Silicone is a clear, highly flexible, neutral cure sealant designed for both interior and exterior use.
Ideal for use on galvanised iron, concrete and roofing, Parfix Roof, Gutter And Concrete is specially formulated to remain flexible under harsh weather conditions.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Sanitary grade silicone
Acetic cure
Excellent adhesion
Watertight seal
Parfix Bathroom And Kitchen Silicone cures to produce a watertight seal and contains agents to resist the growth of mould and fungus. This white coloured sanitary grade sealant is most suited to use on shower recesses, splashbacks, bathtubs and vanities.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Sanitary grade silicone
Acetic cure
Excellent adhesion
Watertight seal
Parfix Bathroom And Kitchen Silicone cures to produce a watertight seal and contains agents to resist the growth of mould and fungus. This white coloured sanitary grade sealant is most suited to use on shower recesses, splashbacks, bathtubs and vanities.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Parfix Glass Silicone Black: Unmatched Bonding for All Your Glass Needs
Key Features
Excellent bond to glass
Acetic cure for optimal sealing
Designed for interior and exterior use
UV resistant and shrink-proof
Specifications
Colour
Black
Model Name
Parfix Window and Glass 300g
Model Number
9300697122445
Material
Silicone polymer
Paintable
No
Stainable
No
UV Resistant
Yes
Outdoor
Yes
Indoor
Yes
Shrink Resistant
Yes
Sandable
No
Applications
Suitable for use on windows, glass partitions, and glass blocks.
Instructions
For optimal results, apply on clean, dry surfaces. Follow safety guidelines for acetic cure silicones.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Paintable
Flexible
Durable
Parfix Gap Filler is a multi-purpose flexible filler that is suitable for interior applications such as skirting and architraves, door and window frames.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Highly flexible as well as mould and UV resistant, Parfix All Purpose Silicone is suitable for use on shower screens, metal roofing, concrete and gutters.
Highly flexible
Mould and UV resistant
Neutral cure
Non-corrosive
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Nordsjö Professional Flexible Wood Filler repairs small cracks and holes in wood. As the name implies, it is a flexible filling for wood, great for interior and exterior use.
Suitable for all types of interior & exterior wood
Quick drying, easy to sand
Water resistant finish will not shrink, crack or crumble
Stainable and paintable
Properties
Ready for use
Excellent adhesion to all types of wood
Tough and durable fill that flexes with the natural movement of wood
Accepts nails and screws
Sandable and paintable after approx. 3 hours (1 cm layer at 20°C)
Must be overcoated when used outside (minimum 2 coats)
Paintable with all types of paint
Maximum layer thickness: 1 cm
Maximum depth: 2 cm
Colour: natural/pine
How to apply
Substrate must be clean, dry, dust and grease free.
Remove all loose material.
Mix the product well before use.
Product can be applied directly from the pot.
Apply filler firmly into the hole with a filling knife.
For a smooth result, finish with a damp filling knife.
For deeper repairs, build up in layers of 1cm, letting the product dry in between layers.
Once dry, sand the filler so it is even with the surface and dust off. Finish with a stain, varnish or paint. The filler may stain or varnish differently to the surrounding wood.
Clean tools with warm water.
Do not store or use below 5°C.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Nordsjö Professional Flexible Wood Filler repairs small cracks and holes in wood. As the name implies, it is a flexible filling for wood, great for interior and exterior use.
Suitable for all types of interior & exterior wood
Quick drying, easy to sand
Water resistant finish will not shrink, crack or crumble
Stainable and paintable
Properties
Ready for use
Excellent adhesion to all types of wood
Tough and durable fill that flexes with the natural movement of wood
Accepts nails and screws
Sandable and paintable after approx. 3 hours (1 cm layer at 20°C)
Must be overcoated when used outside (minimum 2 coats)
Paintable with all types of paint
Maximum layer thickness: 1 cm
Maximum depth: 2 cm
Colour: natural/pine
How to apply
Substrate must be clean, dry, dust and grease free.
Remove all loose material.
Mix the product well before use.
Product can be applied directly from the pot.
Apply filler firmly into the hole with a filling knife.
For a smooth result, finish with a damp filling knife.
For deeper repairs, build up in layers of 1cm, letting the product dry in between layers.
Once dry, sand the filler so it is even with the surface and dust off. Finish with a stain, varnish or paint. The filler may stain or varnish differently to the surrounding wood.
Clean tools with warm water.
Do not store or use below 5°C.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Monarch Mini Silicone is the sealant for your home. Especially useful in kitchens, bathrooms and laundries where sinks, baths, vanities and showers are installed and other outdoor patio areas, this durable polymer creates a waterproof barrier that'll stand up to wear-and-tear while resisting heat or cold when conditions change outside. A versatile property for any project you're working on!
Monarch Mini Silicone sealant is ideal for kitchens, bathrooms and laundries, where sinks, baths, vanities & showers are installed & for other outdoor uses. Available in a variety of colours.
FEATURES
Premium quality 100% silicone
Ideal for wet areas
Indoor and outdoor use
Maximum flexibility
BENEFITS
Proven to last in all weather
Mould resistant
Tack free in 10 minutes
Monarch Mini™ is an innovative range of sealants, fillers, adhesives and accessories for the sealant market. This range of products brings a much easier way to apply sealants or adhesives compared with using traditional products.
The Monarch Mini’s unique and compact sealant cartridge features a shorter length and a smaller diameter, making it easier to control and apply. Reaching into tight spaces where conventional caulking guns can’t, Monarch Mini’s lightweight and superior handling make it more practical and easy to use.
In addition to the Monarch Mini cartridge range are nozzles and caulking guns, which capitalise on the shorter cartridge and increase the places where it can be used. Filled with only premium quality materials, the Monarch Mini™ range is suited to both the DIY market and sections of the trade market, making Monarch Mini a very versatile option.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Monarch Mini Silicone is the sealant for your home. Especially useful in kitchens, bathrooms and laundries where sinks, baths, vanities and showers are installed and other outdoor patio areas, this durable polymer creates a waterproof barrier that'll stand up to wear-and-tear while resisting heat or cold when conditions change outside. A versatile property for any project you're working on!
Monarch Mini Silicone sealant is ideal for kitchens, bathrooms and laundries, where sinks, baths, vanities & showers are installed & for other outdoor uses. Available in a variety of colours.
FEATURES
Premium quality 100% silicone
Ideal for wet areas
Indoor and outdoor use
Maximum flexibility
BENEFITS
Proven to last in all weather
Mould resistant
Tack free in 10 minutes
Monarch Mini™ is an innovative range of sealants, fillers, adhesives and accessories for the sealant market. This range of products brings a much easier way to apply sealants or adhesives compared with using traditional products.
The Monarch Mini’s unique and compact sealant cartridge features a shorter length and a smaller diameter, making it easier to control and apply. Reaching into tight spaces where conventional caulking guns can’t, Monarch Mini’s lightweight and superior handling make it more practical and easy to use.
In addition to the Monarch Mini cartridge range are nozzles and caulking guns, which capitalise on the shorter cartridge and increase the places where it can be used. Filled with only premium quality materials, the Monarch Mini™ range is suited to both the DIY market and sections of the trade market, making Monarch Mini a very versatile option.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Monarch Mini Roof & Gutter Silicone is a neutral cure silicone sealant that is ideal for repairing or installing gutters, roofs, downpipes, skylights and more. It can also be used to install metal sheets in the roofing industry and various other building services.
With such versatility on offer it's no wonder this product's demand has soared so rapidly! What else would you want from your sealant? Well there are added features like its flexibility and resilience that make it perfect for all applications. You can count on Monarch Mini Roof & Gutter Silicone to stick around because of its long-lasting durability - don't wait until disaster strikes again when you could have had the protection you needed beforehand.
FEATURES
Premium quality 100% silicone
Non-corrosive
Neutral cure
AS 4020 approved
BENEFITS
Quick exposure to light running water
Suitable for use in all weather
UV resistant
Monarch Mini™ is an innovative range of sealants, fillers, adhesives and accessories for the sealant market. This range of products brings a much easier way to apply sealants or adhesives compared with using traditional products.
The Monarch Mini’s unique and compact sealant cartridge features a shorter length and a smaller diameter, making it easier to control and apply. Reaching into tight spaces where conventional caulking guns can’t, Monarch Mini’s lightweight and superior handling make it more practical and easy to use.
In addition to the Monarch Mini cartridge range are nozzles and caulking guns, which capitalise on the shorter cartridge and increase the places where it can be used. Filled with only premium quality materials, the Monarch Mini™ range is suited to both the DIY market and sections of the trade market, making Monarch Mini a very versatile option.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Monarch Mini Roof & Gutter Clear Silicone: The Compact Caulking Solution
Product Overview
Designed for roofing and outdoor applications, the Monarch Mini is perfect for a variety of materials like metal, brick, galvanized iron, tiles, and aluminium.
Key Features & Benefits
Quick exposure to light running water
UV resistant for lasting outdoor use
Neutral cure, making it versatile and safe for different materials
Non-corrosive and AS 4020 approved
Compatible with Monarch Mini Compact Caulking Gun
Perfect For
Great for small projects where a full-size cartridge is not needed. Ideal for:
Repairing gutters
Fixing roofs
Mending downpipes
Tight spaces that traditional cartridges can't reach
Colors Available
Available in black and translucent versions for versatility in your projects.
How To Use
Best when used with a Monarch Mini Compact Caulking Gun to reach tight spaces. Always follow the safety guidelines as provided on the product label.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Gorilla Clear Grip® is a flexible, fast-setting, crystal clear contact adhesive that creates a strong, permanent bond. Gorilla Clear Grip® is paintable and waterproof making it great for projects both inside and out! Build, Repair, Craft™
PRODUCT FEATURES
WATERPROOF – For indoor/outdoor use
FAST GRAB – Holds in just seconds
PERMANENT BOND
FLEXIBLE
CRYSTAL CLEAR
HEAVY DUTY
NO-RUN FORMULA
PAINTABLE
PHOTO SAFE
WASHER & DRYER SAFE
BONDS: Metal, Glass, Fabric, Wood, Ceramic, Leather, Paper, Plastic*, and More!
*Not recommended for use on polystyrene, polypropylene or polyethylene products. Not for use on food contact surfaces. Do not dry clean. May cause damage to finished surfaces.
All surfaces should be clean and free of dirt, grease and oil. Best if used between 10°C and 32.2°C. Clear Grip® should only be used in a well ventilated area.
Apply adhesive to each surface to be bonded.
To maximize bond strength: Wait approximately two minutes for adhesive to partially dry before joining surfaces.
Press surfaces firmly together.
NOTE: Bond forms immediately and can be difficult to reposition.
Cure Time
Allow for a minimum of 24 hours for full cure. Cure time may increase with lower temperatures and when used on non-porous surfaces.
Storage Tips
After each use, wipe nozzle with a dry cloth and tightly replace cap. Store in a cool, dry location. Tip: For easier re-opening, apply a thin coat of petroleum jelly to the threads before replacing cap. Store away from children and animals.
Clean-up
Wipe uncured adhesive with a dry cloth and clean with acetone, isopropyl alcohol, or citrus based solvents according to manufacturer’s instructions. Cured adhesive may be removed by scraping from surface.
Paintable
When fully cured.
*NOTE: Not recommended for use on polystyrene, polypropylene or polyethylene products. Not for use on food contact surfaces. Do not dry clean. May cause damage to finished surfaces.
TECHNICAL SPECS
APPLICATION TEMPERATURE – 10° to 32.2° C, best at room temperature
OUTDOOR – Yes
MOISTURE RESISTANT – Waterproof
PAINTABLE – Yes – Can be painted with water and oil based paints, spray paint
SANDABLE – Yes
STAINABLE – Yes
CURED COLOR – Clear
STORAGE TIPS – Flammable adhesive, do not use or store near heat, sparks, flames, or while smoking. Store in a cool, dry location. Wipe nozzle clean before replacing cap, for easy re-open apply a thin coat of petroleum jelly to threads.
GAP FILLING – No
PHOTO SAFE – Yes
WASHER & DRYER SAFE – Yes
How should Gorilla Clear Grip® be stored?
After each use, wipe nozzle with a dry cloth and tightly replace cap. Store in a cool, dry location. Tip: for easier re-opening, apply a thin coat of petroleum jelly to the threads before replacing cap.
What surfaces does Clear Grip® adhere to?
Gorilla Clear Grip® can be adhered to many surfaces including:
Wood, Metal, Stone, Ceramic, Glass, Plastic*, PVC, Brick, Concrete, Foam, Paper, Rubber, Fabric, and Laminate.
*NOTE: Not recommended for use on polystyrene, polypropylene or polyethylene products. Not for use on food contact surfaces. Do not dry clean. May cause damage to finished surfaces.
Is Gorilla Clear Grip® food safe?
Clear Grip® should not be used around food.
How do you clean up Gorilla Clear Grip®?
When using Clear Grip®, it is best to wear safety glasses and chemical resistant gloves.
To clean uncured adhesive: wipe uncured adhesive with a dry cloth and clean with acetone, isopropyl alcohol, or citrus based solvents according to manufacturer’s instructions. Cured adhesive may be removed by scraping from surface.
See first aid treatment for skin contact.
Is Gorilla Clear Grip® gap filling?
No
Is Gorilla Clear Grip® UV Resistant?
Yes
Can Gorilla Clear Grip® be used both indoors and outdoors?
Yes, Gorilla Clear Grip® can be used both indoors and outdoors.
Is Gorilla Clear Grip® stainable?
Yes, Gorilla Clear Grip® is stainable when fully cured.
Is Gorilla Clear Grip® sandable?
Yes, cured Gorilla Clear Grip® is sandable.
Is Gorilla Clear Grip® paintable?
Yes, when fully cured.
Is Gorilla Clear Grip® Washer/Dryer safe?
Yes
Is Gorilla Clear Grip® photo safe?
Gorilla Clear Grip® is safe to use with photos.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Dunlop Primer & Additive is a water-based multipurpose solution that improves the bond between porous substrates and adhesives, waterproofing membranes, or screeds. It can be used as a primer before tiling or as an additive to strengthen screeds and grouts.
Surface Preparation:
Ensure the surface is clean, dry, and free of dust, oil, wax, paint, or other contaminants. For new concrete or screeds, allow to cure completely. Fill cracks and voids using a patching compound.
Application Instructions:
As a primer, dilute 1 part Dunlop Primer & Additive with 3 parts water. Apply evenly using a brush or roller. Allow it to dry for at least 30 minutes before applying adhesives or membranes.
As an additive, replace part or all of the mixing water in tile adhesives or grouts to improve flexibility and adhesion. Follow the manufacturer's recommended ratios.
Coverage:
Approximately 6–10m² per litre, depending on surface porosity.
Drying Time:
Allow to dry for at least 30 minutes before overcoating. Drying may vary depending on temperature and humidity.
Clean Up:
Clean tools and equipment with water immediately after use.
Technical Data:
Base: Water-based acrylic polymer
pH: Neutral
Appearance: Milky white liquid
Shelf Life: 12 months (unopened in cool, dry conditions)
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Dunlop Express Wet Area Waterproofing Membrane is a high-performance, fast-drying liquid membrane designed for use in internal wet areas including bathrooms, showers, laundries, and kitchens. This flexible, water-based acrylic polyurethane formulation creates a seamless and highly durable waterproof barrier that is tile-ready within hours.
It’s suitable for use under tile adhesives, screeds, and other flooring products. The product forms a tough, elastomeric layer that resists movement, cracking, and water penetration. It meets the requirements of Class III membranes and is suitable for both floor and wall applications.
Surface Preparation:
Ensure all surfaces are clean, dry, and structurally sound. Remove dust, grease, oil, curing compounds, and loose or flaking materials. Prime all surfaces using a compatible primer. On porous or highly absorbent surfaces, apply a second primer coat if needed. Any existing cracks, gaps, or joints should be sealed or reinforced using bond breakers or reinforcing fabric.
Application Instructions:
Apply the membrane using a brush or roller.
Two coats are required for effective waterproofing.
First coat should be applied in one direction.
Once dry to the touch (approx. 2 hours), apply the second coat in the opposite direction.
Membrane should extend at least 150mm up walls in general wet areas and 1.8m in shower recesses.
Waterproofing must be applied continuously and without breaks or pinholes.
Use reinforcing fabric over joints and corners if required.
Avoid application in conditions below 10°C or above 35°C.
Coverage:
Approximately 1m² per litre per coat. A 5kg pail covers roughly 2.5m² with two coats, depending on surface porosity.
Drying Time:
Touch dry: 1–2 hours
Recoat time: 2 hours
Ready for tiling: 4–6 hours
Fully cured: 24 hours
Drying times will vary with ambient temperature and humidity.
Clean Up:
Clean tools and equipment immediately after use with water. Do not allow membrane to dry on tools.
Technical Data:
Type: Water-based acrylic polyurethane
Classification: Class III membrane
Application Method: Brush or roller
Flexibility: High
Water Resistance: Excellent
Colour: Grey
Shelf Life: 12 months (unopened in cool, dry conditions)
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Dunlop Damp-Proof Waterproofing is an acrylic brush-on membrane designed to prevent rising damp, efflorescence, and resist negative hydrostatic pressure. It adheres excellently to substrates including brick, masonry, concrete block, concrete, stone, and timber, and can be easily applied using a brush or roller. Once cured, it can be overcoated with most decorative paints.
Surface Preparation: Ensure all surfaces are structurally sound and free from existing coatings, adhesives, and efflorescence to achieve maximum bond strength and resistance to hydrostatic pressure. Surfaces may be damp but not wet and must be cleaned free of dirt, grease, oil, or other contaminants. Fill holes and non-structural cracks with a suitable floor repairer before application.
Application Instructions:
For Floors: Spread the material using a brush or long nap roller to achieve coverage, then finish with a long nap roller.
For Walls: Apply using a brush, roller, or spray, ensuring even coverage.
Work the material into voids to avoid pinholing.
For areas affected by hydrostatic pressure, apply a minimum of two coats. The second coat can be applied after 4 hours. Ensure uniform coverage and the required dry film thickness per coat.
Coverage:
Single Coat: Approximately 3m² per litre, per coat, when used as a barrier to efflorescence or as a moisture-resistant coating over green concrete.
Multiple Coats: For areas with hydrostatic pressure, two coats are required at a coverage rate of 1.5m² per litre per coat. Additional coats may be necessary to achieve uniform coverage.
Drying Time: Allow the membrane to cure for 24 hours before applying adhesives, mortars, decorative coatings, or other surface treatments. Ensure the membrane is not damaged during subsequent treatments. For floor surfaces, allow the final coating to cure for at least 24 hours before further treatment to minimize the risk of mechanical damage.
Clean Up: Wash all equipment with water or a water/detergent mixture immediately after use.
Technical Data:
Base: Acrylic
Application Temperature: 10°C to 35°C
Dry Film Thickness: Achieve required thickness as per application guidelines
Curing Time: 24 hours before overcoating
Shelf Life: Refer to packaging for details
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Davco SMP Evo Tile Adhesive is a high-performance, flexible cement-based adhesive ideal for the installation of natural stone, porcelain, and marble tiles. Specially designed with advanced low-dust technology, it provides a cleaner and safer working environment. Its superior non-slump properties make it perfect for wall and floor tiling, including large-format tiles.
Surface Preparation:
Ensure surfaces are structurally sound, dry, and free from contaminants like dust, oil, and wax. Smooth surfaces should be roughened slightly, and absorbent substrates should be primed. Existing tiles must be clean, dry, and securely bonded.
Mixing:
Mix 5kg of powder with approximately 1.4–1.5L of clean water using a mechanical mixer until a smooth, lump-free paste is formed. Allow it to stand for 5 minutes before remixing. Do not add more water after mixing.
Application:
Apply the adhesive with a notched trowel over an area no larger than can be tiled within the open time. Firmly press tiles into the adhesive bed with a twisting motion to ensure full contact. Back-buttering may be necessary for large tiles or uneven substrates.
Coverage:
Approximately 1.5–1.75m² per 5kg bag using a 10mm notch trowel.
Drying Time:
Tiles can generally be grouted after 24 hours. Allow 2 days before exposure to water in wet areas and 21 days for submerged areas like pools.
Clean-up:
Clean tools and excess adhesive with water before it sets. Once cured, adhesive must be removed mechanically.
Technical Data:
Classification: C2S1TE
Pot life: 1.5 hours
Open time: 30 minutes
Adjustability time: 20 minutes
VOC content: Low
Appearance: White powder
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Concentrated grout additive designed to increase the flexibility, strength and water resistance of cement based grouts.
Davco® 4 in 1 Grout Additive is suitable for interior and exterior domestic applications. Ideal for submerged and high foot traffic areas, where a high degree of deformability is required.
Increases flexibility, strength and water resistance of cement based grout
Enhances the colour of grout
Reduced likelihood of efflorescence
Usage
To reduce the porosity of cement based grouts
To improve the compressive strength of cement based grouts
To improve the flexural strength of cement-based grouts
Suitable for use when grouting over fibre cement sheet floors and swimming pools or where a greater performance level / heavy duty performance is required
Advantages
Increases flexibility, strength and water resistance of cement based grout
Enhances the colour of grout
Reduced likelihood of efflorescence
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Noise, vibration, and impact dampening properties are exceptional.
Adhesion and sealing qualities are excellent.
Tack-free time and cure speed are both quick.
It's safe to use in both salt and fresh water.
Designed in Australia
Seal N Flex Auto & Marine FC is a high-performance, fast-curing polyurethane adhesive and sealant from Bostik.
Bostik Seal N Flex Auto & Marine FC has remarkable adhesion properties and is appropriate for a wide range of internal and external industrial and automotive adhesion applications.
It's paintable, slump-resistant, and water-resistant, as well as resistant to fungal assault.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Bostik Seal it Kitchen & Bathroom White: The All-In-One Solution for Wet Areas
Product Overview
A premium oxime-curing silicone sealant specifically formulated to resist mildew and mold in hot, humid environments.
Key Features
Neutral cure for versatile application
Excellent for UV exposure and porous surfaces
Resistant to mold and mildew
±25% joint movement capabilities
WaterMark approved for quality assurance
Low odour and UV resistant
Safe on various materials including galvanized steel and concrete
Where to Use
This product is ideal for sealing in:
Kitchens, bathrooms, toilets, and showers
Basins and vanity units
Glass partitions
Ceramic tiles
Vitreous enamel
Most laminated surfaces
Fibre glass
Rimless sinks
Instructions
Apply on clean, dry surfaces for optimal results. Follow safety guidelines as stated on the product label.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Bostik Seal it Kitchen & Bathroom Translucent: The All-In-One Solution for Wet Areas
Product Overview
A premium oxime-curing silicone sealant specifically formulated to resist mildew and mold in hot, humid environments.
Key Features
Neutral cure for versatile application
Excellent for UV exposure and porous surfaces
Resistant to mold and mildew
±25% joint movement capabilities
WaterMark approved for quality assurance
Low odour and UV resistant
Safe on various materials including galvanized steel and concrete
Where to Use
This product is ideal for sealing in:
Kitchens, bathrooms, toilets, and showers
Basins and vanity units
Glass partitions
Ceramic tiles
Vitreous enamel
Most laminated surfaces
Fibre glass
Rimless sinks
Instructions
Apply on clean, dry surfaces for optimal results. Follow safety guidelines as stated on the product label.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Bostik Nail It Instant Grab White: Grab It Fast, Hold It Forever
Product Overview
Bostik Nail It Instant Grab White is a high-quality professional adhesive crafted with MSP (Modified-Silyl Polymer) technology. It offers extremely high initial tack, eliminating the need for fixation or support during curing.
Smart Advantages
Extremely high initial tack
No fixation or support needed during curing
Free of isocyanates, phthalates, solvents, and silicones
Suitable for both interior and exterior use
Non-corrosive towards metals
Almost odorless
Resistant to moisture, weather, and UV
Applications
Universal bonding adhesive suitable for:
Stone, Concrete, Glass
Metals, Alloys, Stainless steel
Plastics, Polyurethane, PVC
Wood, Paint Systems
Directions for Use
Application should be done in vertical stripes using a caulking gun. No need for fixation or support due to high initial strength.
Limitations
Not suitable for certain plastics, continuous water exposure, or movement joints.
Cleaning & Safety
Remove excess uncured adhesive with Bostik Handy Wipe or a damp cloth. Cured adhesive can only be mechanically removed.
Product Codes & Specifications
Available in 290ml cartridges. Temperature resistance ranges from -40°C to +90°C.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Betta Tilecare Wet Area Waterproofer is a flexible, fast-drying, liquid rubber membrane designed for waterproofing internal wet areas such as bathrooms, showers, laundries, and tiled spaces. It provides a durable, seamless moisture barrier that resists water pressure and prevents leaks when applied beneath tiles, screeds, or surface coatings.
Surface Preparation:
All surfaces must be clean, dry, and structurally sound. Remove dust, oil, grease, wax, and loose or flaking material. Smooth, glossy surfaces should be roughened or etched. Rough or uneven surfaces should be patched and leveled. Mechanically remove any surface contamination or de-bonded coatings for optimal adhesion.
Priming (if required):
Use a compatible primer on highly porous, glossy, or damp surfaces to promote adhesion. Ensure primed surfaces are dry before applying the membrane.
Application Instructions:
Apply a bond breaker system such as joint tape or fabric to corners, joints, and penetrations.
Apply the first coat using a brush or roller, working it into the surface to avoid pinholes.
Allow the first coat to dry (approx. 1 hour), then apply the second coat in the opposite direction.
Total coverage should be at least 1.5L/m², forming a final dried film thickness of approximately 1.2mm.
Coverage should extend up walls at least 150mm in general areas and 1800mm in shower recesses.
Allow the membrane to cure fully before tiling or overcoating.
Coverage:
Approximately 1.5L per square metre for two coats, depending on surface porosity.
Drying Time:
Tack-free: 45 minutes
Recoat: 1 hour
Ready for tiling: 4 hours
Flood test ready: 16 hours
Dry times may vary based on temperature and humidity.
Clean Up:
Clean tools and equipment with water immediately after use.
Technical Data:
Base: Water-based liquid rubber
Colour: Grey
Finish: Flexible, seamless membrane
Dried Film Thickness: Approx. 1.2mm (after two coats)
Application Temp: 5°C to 35°C
Shelf Life: Refer to packaging for details
Sealants/adhesives engineered to accommodate movement without cracking. Check stated movement capability for your joint design. Use filters to refine by chemistry and cure speed. Always review the product page and TDS/SDS.
![Selleys Flexiseal Multipurpose Sealant Polyurethane 310ml [Black]](http://gluesaustralia.com.au/cdn/shop/files/81e21d7d520d41a280976d39a403b5c9.jpg?v=1757753238&width=645)
![Selleys Marine Flex For Boats Pools and Spas Water Proof [Black]](http://gluesaustralia.com.au/cdn/shop/files/f795ca009d10470fb346ebed4b3dc2a3.png?v=1757753303&width=645)
![Selleys Armour Flex High Performance Adhesive [Grey]](http://gluesaustralia.com.au/cdn/shop/files/9300697125279_ca037dae-5a32-46a8-b3b3-d4b80d5f85fd.jpg?v=1754711933&width=645)
![Selleys 401 Silicone Adhesive for Gaskets Resists 205 Degrees [Clear]](http://gluesaustralia.com.au/cdn/shop/files/8755f41ba29a40388c0684d41f7eeeda.jpg?v=1757753359&width=645)
![RiteTack Power-X Construction Adhesive Sealant 290ml [White]](http://gluesaustralia.com.au/cdn/shop/files/8711595195942_51a4eb7a-99ab-421a-98a2-8d45cb2f05e6.png?v=1754712003&width=645)
![Poly Coloured Gap Filler Acrylic Sealant Int & Ext [Light Grey]](http://gluesaustralia.com.au/cdn/shop/files/9311531002762_be7a4237-355f-47f3-ae09-dabb40913652.png?v=1754712211&width=645)
![Poly Coloured Gap Filler Acrylic Sealant Int & Ext [Cedar]](http://gluesaustralia.com.au/cdn/shop/files/9311531002731_8a23516e-dc7a-4a74-9fda-5436c7c62091.jpg?v=1754712214&width=645)
![Poly Coloured Gap Filler Acrylic Sealant Int & Ext [Black]](http://gluesaustralia.com.au/cdn/shop/files/9311531002724_6b56cb9d-718d-4289-8566-b1965f6372f4.webp?v=1754712217&width=645)
![Parfix Roof Gutter Concrete Silicone Sealant [Grey]](http://gluesaustralia.com.au/cdn/shop/files/9300697115751_115bf094-7ace-4242-bb30-259319ee7c44.png?v=1754712242&width=645)
![Parfix Roof Gutter Concrete Silicone Sealant [Clear]](http://gluesaustralia.com.au/cdn/shop/files/9300697115744_c50eb875-361a-40d9-9352-04fade1d8d60.jpg?v=1754712244&width=645)
![Parfix Kitchen Bathroom Silicone Sealant [Clear]](http://gluesaustralia.com.au/cdn/shop/files/9300697115935_9d24cb9e-09d9-43f4-8d51-2c3a3b021f3d.jpg?v=1754712259&width=645)
![Parfix Kitchen & Bathroom Silicone Sealant 300g [White]](http://gluesaustralia.com.au/cdn/shop/files/9300697115928_85e9adb4-ec92-46ea-8eda-b6ab353e59f8.jpg?v=1754712261&width=645)
![Parfix Gap Filler Flexible Paintable Interior [White]](http://gluesaustralia.com.au/cdn/shop/files/9300697115812_e966678a-f2ee-4e79-abc6-2f960851c302.png?v=1754712264&width=645)
![Monarch Mini Silicone Mould Resistant [White]](http://gluesaustralia.com.au/cdn/shop/files/9320090029066_2af7d350-636b-476c-9c8a-71b4ddb4f0e5.png?v=1754712301&width=645)
![Monarch Mini Silicone Mould Resistant [Translucent]](http://gluesaustralia.com.au/cdn/shop/files/9320090029073_9b2a79dd-e58b-4fb6-a3b1-d6525871d967.png?v=1754712303&width=645)
![Monarch Mini Roof and Gutter Silicone [Black]](http://gluesaustralia.com.au/cdn/shop/files/9320090029257_ad8c4dd8-7138-4341-881e-1e58084dc0c8.png?v=1754716023&width=645)
![Monarch Mini Roof and Gutter Silicone [Black]](http://gluesaustralia.com.au/cdn/shop/files/9320090029257_d1f88907-d8a6-4e7f-b887-a4ac4f2ab20a.png?v=1754716023&width=645)
![Monarch Mini Gap Filler [White]](http://gluesaustralia.com.au/cdn/shop/files/9320090029080_1b178ddb-e3de-4ec1-83bb-8e320595bdb3.jpg?v=1754712311&width=645)
![Monarch Mini Gap Filler [Cream]](http://gluesaustralia.com.au/cdn/shop/files/9320090030581_c5a95353-e7ee-4d92-8445-93066291f976.jpg?v=1754712313&width=645)
![Monarch Mini Gap Filler [Brown]](http://gluesaustralia.com.au/cdn/shop/files/9320090030574_91b63521-91d4-427c-ba6f-c5f54343a9c6.jpg?v=1754712314&width=645)
![Monarch Mini Gap Filler [Black]](http://gluesaustralia.com.au/cdn/shop/files/9320090030567_dd3b7bac-a9e5-4986-9275-2bff35fb52de.jpg?v=1754712316&width=645)
![Bostik Seal N Flex Auto & Marine FC Adhesive & Sealant [Black]](http://gluesaustralia.com.au/cdn/shop/files/9310492265025_0316718a-8147-4bdd-955a-19d6d8a0bc59.png?v=1754712705&width=645)
![Selleys Flexiseal Multipurpose Sealant Polyurethane 310ml [Black]](//gluesaustralia.com.au/cdn/shop/files/81e21d7d520d41a280976d39a403b5c9.jpg?v=1757753238&width=645)
![Selleys Marine Flex For Boats Pools and Spas Water Proof [Black]](//gluesaustralia.com.au/cdn/shop/files/f795ca009d10470fb346ebed4b3dc2a3.png?v=1757753303&width=645)
![Selleys Armour Flex High Performance Adhesive [Grey]](//gluesaustralia.com.au/cdn/shop/files/9300697125279_ca037dae-5a32-46a8-b3b3-d4b80d5f85fd.jpg?v=1754711933&width=645)
![Selleys 401 Silicone Adhesive for Gaskets Resists 205 Degrees [Clear]](//gluesaustralia.com.au/cdn/shop/files/8755f41ba29a40388c0684d41f7eeeda.jpg?v=1757753359&width=645)
![RiteTack Power-X Construction Adhesive Sealant 290ml [White]](//gluesaustralia.com.au/cdn/shop/files/8711595195942_51a4eb7a-99ab-421a-98a2-8d45cb2f05e6.png?v=1754712003&width=645)
![Poly Coloured Gap Filler Acrylic Sealant Int & Ext [Light Grey]](//gluesaustralia.com.au/cdn/shop/files/9311531002762_be7a4237-355f-47f3-ae09-dabb40913652.png?v=1754712211&width=645)
![Poly Coloured Gap Filler Acrylic Sealant Int & Ext [Cedar]](//gluesaustralia.com.au/cdn/shop/files/9311531002731_8a23516e-dc7a-4a74-9fda-5436c7c62091.jpg?v=1754712214&width=645)
![Poly Coloured Gap Filler Acrylic Sealant Int & Ext [Black]](//gluesaustralia.com.au/cdn/shop/files/9311531002724_6b56cb9d-718d-4289-8566-b1965f6372f4.webp?v=1754712217&width=645)
![Parfix Roof Gutter Concrete Silicone Sealant [Grey]](//gluesaustralia.com.au/cdn/shop/files/9300697115751_115bf094-7ace-4242-bb30-259319ee7c44.png?v=1754712242&width=645)
![Parfix Roof Gutter Concrete Silicone Sealant [Clear]](//gluesaustralia.com.au/cdn/shop/files/9300697115744_c50eb875-361a-40d9-9352-04fade1d8d60.jpg?v=1754712244&width=645)
![Parfix Kitchen Bathroom Silicone Sealant [Clear]](//gluesaustralia.com.au/cdn/shop/files/9300697115935_9d24cb9e-09d9-43f4-8d51-2c3a3b021f3d.jpg?v=1754712259&width=645)
![Parfix Kitchen & Bathroom Silicone Sealant 300g [White]](//gluesaustralia.com.au/cdn/shop/files/9300697115928_85e9adb4-ec92-46ea-8eda-b6ab353e59f8.jpg?v=1754712261&width=645)
![Parfix Gap Filler Flexible Paintable Interior [White]](//gluesaustralia.com.au/cdn/shop/files/9300697115812_e966678a-f2ee-4e79-abc6-2f960851c302.png?v=1754712264&width=645)
![Monarch Mini Silicone Mould Resistant [White]](//gluesaustralia.com.au/cdn/shop/files/9320090029066_2af7d350-636b-476c-9c8a-71b4ddb4f0e5.png?v=1754712301&width=645)
![Monarch Mini Silicone Mould Resistant [Translucent]](//gluesaustralia.com.au/cdn/shop/files/9320090029073_9b2a79dd-e58b-4fb6-a3b1-d6525871d967.png?v=1754712303&width=645)
![Monarch Mini Roof and Gutter Silicone [Black]](//gluesaustralia.com.au/cdn/shop/files/9320090029257_ad8c4dd8-7138-4341-881e-1e58084dc0c8.png?v=1754716023&width=645)
![Monarch Mini Roof and Gutter Silicone [Black]](//gluesaustralia.com.au/cdn/shop/files/9320090029257_d1f88907-d8a6-4e7f-b887-a4ac4f2ab20a.png?v=1754716023&width=645)
![Monarch Mini Gap Filler [White]](//gluesaustralia.com.au/cdn/shop/files/9320090029080_1b178ddb-e3de-4ec1-83bb-8e320595bdb3.jpg?v=1754712311&width=645)
![Monarch Mini Gap Filler [Cream]](//gluesaustralia.com.au/cdn/shop/files/9320090030581_c5a95353-e7ee-4d92-8445-93066291f976.jpg?v=1754712313&width=645)
![Monarch Mini Gap Filler [Brown]](//gluesaustralia.com.au/cdn/shop/files/9320090030574_91b63521-91d4-427c-ba6f-c5f54343a9c6.jpg?v=1754712314&width=645)
![Monarch Mini Gap Filler [Black]](//gluesaustralia.com.au/cdn/shop/files/9320090030567_dd3b7bac-a9e5-4986-9275-2bff35fb52de.jpg?v=1754712316&width=645)
![Bostik Seal N Flex Auto & Marine FC Adhesive & Sealant [Black]](//gluesaustralia.com.au/cdn/shop/files/9310492265025_0316718a-8147-4bdd-955a-19d6d8a0bc59.png?v=1754712705&width=645)
