{"title":"Loxeal","description":null,"products":[{"product_id":"loxeal-58-11-thread-sealant-anaerobic-adhesive-50ml","title":"Loxeal 58-11 Thread Sealant Anaerobic Adhesive 50ml","description":"\u003cdiv class=\"product-description\"\u003e\n  \u003ch1\u003eLoxeal 58-11 Anaerobic Thread Sealant\u003c\/h1\u003e\n\n  \u003cp\u003eLoxeal 58-11 is a high performance anaerobic sealant designed for \u003cstrong\u003emetal thread joints\u003c\/strong\u003e only. It replaces PTFE tape and cord, delivers instant sealing against moderate pressure, and cures to form a shock and vibration resistant seal that remains reliable from \u003cstrong\u003e-55°C to +150°C\u003c\/strong\u003e.\u003c\/p\u003e\n\n  \u003ch2\u003eWhy choose Loxeal 58-11\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eInstant sealing\u003c\/strong\u003e against moderate pressure to get systems back in service fast.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eThixotropic\u003c\/strong\u003e formulation stays where you put it and resists migration on threads.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eWide chemical compatibility\u003c\/strong\u003e including gas, water, LPG, hydrocarbons, oils and more.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eShock and vibration resistant\u003c\/strong\u003e for durable, leak free joints.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eTemperature range\u003c\/strong\u003e from -55°C to +150°C for tough Australian conditions.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch2\u003eCertified and approved\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eGas approvals\u003c\/strong\u003e: DVGW and DIN EN 751-1, plus Australian Gas Association for working pressure up to 20 bar.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eOxygen service\u003c\/strong\u003e: Approved for gaseous oxygen up to 10 bar at +60°C.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePotable water\u003c\/strong\u003e: WRAS listed and suitable for contact with wholesome water. Also approved for contact with drinking water by Global Mark.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eFood area use\u003c\/strong\u003e: NSF registered category S4 for use as an adhesive in and around food processing areas.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eHydrogen\u003c\/strong\u003e: Tested by KIWA as a sealant for use with pure hydrogen to EN 751-1.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch2\u003eTypical applications\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eSealing tapered and parallel \u003cstrong\u003emetal\u003c\/strong\u003e threaded fittings in plumbing, HVAC, gas and hydraulic systems.\u003c\/li\u003e\n    \u003cli\u003eReplacing PTFE tape or thread cord on metal pipework where a permanent, pressure resistant seal is needed.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch2\u003eDirections\u003c\/h2\u003e\n  \u003col\u003e\n    \u003cli\u003eClean and degrease threads thoroughly.\u003c\/li\u003e\n    \u003cli\u003eCut the nozzle to the required bead size.\u003c\/li\u003e\n    \u003cli\u003eApply a continuous bead \u003cstrong\u003e1 to 2 threads back\u003c\/strong\u003e from the leading edge. Ensure full coverage around the circumference.\u003c\/li\u003e\n    \u003cli\u003eAssemble and tighten the joint. Wipe away excess uncured material.\u003c\/li\u003e\n    \u003cli\u003eAllow to cure (see Cure times). Cure speed can be accelerated on passive metals or at low temperature with an appropriate activator.\u003c\/li\u003e\n  \u003c\/ol\u003e\n\n  \u003ch2\u003eCure times at +25°C\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eHandling\u003c\/strong\u003e: 15 to 30 minutes\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eFunctional\u003c\/strong\u003e: 1 to 3 hours\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eTime to water service for potable water systems at +21.1°C\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eBrass, copper, cast iron\u003c\/strong\u003e: 24 hours\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eStainless steel, aluminium\u003c\/strong\u003e: 7 days\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch2\u003eTechnical data\u003c\/h2\u003e\n  \u003ctable\u003e\n    \u003ctbody\u003e\n      \u003ctr\u003e\n\u003ctd\u003eChemistry\u003c\/td\u003e\n\u003ctd\u003eAnaerobic methacrylate\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eYellow (fluorescent under blue light)\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eViscosity at +25°C\u003c\/td\u003e\n\u003ctd\u003e20,000 to 80,000 mPa·s, thixotropic\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eSpecific gravity\u003c\/td\u003e\n\u003ctd\u003eApprox. 1.1 g\/ml\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eGap filling\u003c\/td\u003e\n\u003ctd\u003eUp to 0.30 mm (M56 \/ 2 inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eFlash point\u003c\/td\u003e\n\u003ctd\u003eGreater than +100°C\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eShear strength\u003c\/td\u003e\n\u003ctd\u003e6 to 13 N\/mm² (ISO 10123)\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eBreakaway torque\u003c\/td\u003e\n\u003ctd\u003e18 to 24 N·m (ISO 10964)\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003ePrevailing torque\u003c\/td\u003e\n\u003ctd\u003e7 to 14 N·m (ISO 10964)\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eService temperature\u003c\/td\u003e\n\u003ctd\u003e-55°C to +150°C\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eShelf life\u003c\/td\u003e\n\u003ctd\u003e1 year in unopened packaging at ? +25°C\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n\n  \u003ch2\u003eChemical resistance\u003c\/h2\u003e\n  \u003cp\u003eExcellent resistance to motor oil, gearbox oil, gasoline and hydraulic oil. Excellent to good resistance in 50 percent water glycol at elevated temperature.\u003c\/p\u003e\n\n  \u003ch2\u003eLimitations and notes\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eFor \u003cstrong\u003emetal to metal\u003c\/strong\u003e threaded joints only. Not suitable for plastic threads or rubber components.\u003c\/li\u003e\n    \u003cli\u003eLiquid product can attack some coatings and plastics. Pre test if unsure.\u003c\/li\u003e\n    \u003cli\u003eFor disassembly, use normal tools. Heat components to approximately +150°C to +250°C if required, then remove cured residue mechanically and clean with solvent.\u003c\/li\u003e\n    \u003cli\u003eStore in a cool, dry place at or below +25°C. Do not return unused product to the bottle.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003cp class=\"disclaimer\"\u003e\u003cem\u003eAll technical information is provided as a guide only. Always verify suitability with your specific materials, operating pressures and local regulations before use. Follow all safety and handling instructions on the product label and safety data sheet.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Loxeal","offers":[{"title":"Default Title","offer_id":52787831931246,"sku":"GA8029822004807","price":19.31,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/files\/0d7d2db038c2472e8a5009c6fe310756.jpg?v=1760924161"},{"product_id":"loxeal-24-18-threadlocker-low-strength-anaerobic-adhesive-50ml","title":"Loxeal 24-18 Threadlocker Low Strength Anaerobic Adhesive 50ml","description":"\u003cdiv class=\"product-description\"\u003e\n\u003ch1\u003eLoxeal 24-18 Low Strength Anaerobic Threadlocker\u003c\/h1\u003e\n\u003cp\u003eLoxeal 24-18 is a low strength anaerobic threadlocker for nuts, bolts and screws of all types that need to be \u003cstrong\u003eeasily dismantled\u003c\/strong\u003e later with ordinary hand tools. It locks fasteners against loosening from vibration and thermal cycling while staying serviceable, making it the go-to grade for small screws, adjustment fasteners and parts that see regular maintenance.\u003c\/p\u003e\n\u003ch2\u003eWhy choose Loxeal 24-18\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy disassembly\u003c\/strong\u003e: low breakaway torque means fasteners come apart with standard tools, no heat needed in most cases.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnti-vibration\u003c\/strong\u003e: prevents self-loosening caused by vibration, shock and temperature changes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide chemical compatibility\u003c\/strong\u003e: resists water, gases, oils, gasoline, diesel and many chemicals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGas approved\u003c\/strong\u003e: DVGW approved as a gas-tight sealant for threaded fittings to European norm EN 751-1.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eService temperature\u003c\/strong\u003e from -55°C to +150°C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePurple colour\u003c\/strong\u003e, fluorescent under blue light for easy inspection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTypical applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLocking small screws, grub screws, calibration and adjustment fasteners that require frequent servicing.\u003c\/li\u003e\n\u003cli\u003eGeneral automotive, machinery and DIY threadlocking where easy removal matters.\u003c\/li\u003e\n\u003cli\u003eThread sealing of metal fittings where a low strength, dismantlable seal is acceptable.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to use\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eClean and degrease threads (Loxeal Cleaner 10 recommended).\u003c\/li\u003e\n\u003cli\u003eApply enough product to fill the engaged threads.\u003c\/li\u003e\n\u003cli\u003eAssemble the parts and tighten as normal.\u003c\/li\u003e\n\u003cli\u003eAllow to cure before putting into service. On passivated surfaces or in cold conditions, use Loxeal Activator 11 to speed curing.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eCure times at +25°C\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandling\u003c\/strong\u003e: 15 to 30 minutes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunctional\u003c\/strong\u003e: 1 to 3 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull cure\u003c\/strong\u003e: up to 24 to 36 hours depending on substrate, gap and temperature\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eChemistry\u003c\/td\u003e\n\u003ctd\u003eAnaerobic methacrylate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003ePurple (fluorescent under blue light)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStrength grade\u003c\/td\u003e\n\u003ctd\u003eLow (easy to dismantle)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eViscosity at +25°C\u003c\/td\u003e\n\u003ctd\u003e800 to 1,400 mPa·s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpecific gravity\u003c\/td\u003e\n\u003ctd\u003eApprox. 1.05 g\/ml\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax thread \/ gap filling\u003c\/td\u003e\n\u003ctd\u003eM24 \/ 0.20 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShear strength\u003c\/td\u003e\n\u003ctd\u003e3 to 5 N\/mm² (ISO 10123)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBreakaway torque\u003c\/td\u003e\n\u003ctd\u003e5 to 8 N·m (ISO 10964)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrevailing torque\u003c\/td\u003e\n\u003ctd\u003e2 to 5 N·m (ISO 10964)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eService temperature\u003c\/td\u003e\n\u003ctd\u003e-55°C to +150°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApprovals\u003c\/td\u003e\n\u003ctd\u003eDVGW gas-tight sealant, EN 751-1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShelf life\u003c\/td\u003e\n\u003ctd\u003e1 year in unopened packaging at up to +25°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eChemical resistance\u003c\/h2\u003e\n\u003cp\u003eExcellent resistance to gasoline and brake fluid at room temperature; excellent to good resistance to motor oil, gearbox oil and diesel at +125°C, and to 50 percent water glycol at +87°C.\u003c\/p\u003e\n\u003ch2\u003eImportant notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFor \u003cstrong\u003emetal\u003c\/strong\u003e fasteners. Liquid product can attack some coatings, plastics and elastomers; contact with some thermoplastics may cause stress cracking. Pre-test if unsure.\u003c\/li\u003e\n\u003cli\u003eFor disassembly use normal tools; if needed heat parts to +150°C to +250°C, remove cured residue mechanically and clean with acetone.\u003c\/li\u003e\n\u003cli\u003eStore cool and dry at or below +25°C. Do not return used product to the bottle.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSafety\u003c\/h2\u003e\n\u003cp\u003eConsult the Safety Data Sheet before use. Follow all handling instructions on the product label.\u003c\/p\u003e\n\u003cp class=\"disclaimer\"\u003e\u003cem\u003eAll technical information is provided as a guide only. Always verify suitability with your specific materials and operating conditions before use.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Loxeal","offers":[{"title":"Default Title","offer_id":54239968493934,"sku":"GA-LOX2418-050","price":39.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/files\/72464.jpg?v=1782980627"},{"product_id":"loxeal-55-03-threadlocker-medium-strength-anaerobic-adhesive-50ml","title":"Loxeal 55-03 Threadlocker Medium Strength Anaerobic Adhesive 50ml","description":"\u003cdiv class=\"product-description\"\u003e\n\u003ch1\u003eLoxeal 55-03 Medium Strength Anaerobic Threadlocker\u003c\/h1\u003e\n\u003cp\u003eLoxeal 55-03 is a medium strength anaerobic threadlocker for nuts and bolts of all types that may need to be \u003cstrong\u003edismantled\u003c\/strong\u003e later. It tolerates minor oil contamination on parts, so it performs even on as-received fasteners, and it holds its locking and sealing properties from \u003cstrong\u003e-55°C to +200°C\u003c\/strong\u003e (up to +250°C for short periods). The direct alternative to Loctite 243.\u003c\/p\u003e\n\u003ch2\u003eWhy choose Loxeal 55-03\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOil tolerant\u003c\/strong\u003e: cures reliably on lightly oiled threads without extensive cleaning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh temperature\u003c\/strong\u003e: proven unscrewing resistance at +200°C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eServiceable strength\u003c\/strong\u003e: locks firmly against vibration yet can be dismantled with hand tools.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide chemical compatibility\u003c\/strong\u003e: resists water, gas, oils, gasoline, brake fluid, ethanol, biodiesel and many chemicals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlue colour\u003c\/strong\u003e, fluorescent under blue light for easy inspection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCertified and approved\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGas\u003c\/strong\u003e: approved as gas-tight sealant for threaded fittings to EN 751-1 (DVGW and Gaz de France).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePotable water\u003c\/strong\u003e: WRAS approved and compliant with the German UBA declaration for drinking water use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFood areas\u003c\/strong\u003e: NSF registered category S4 for use as an adhesive in and around food processing areas.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTypical applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLocking machine bolts, pump housings, gearbox fasteners and automotive nuts and bolts subject to vibration.\u003c\/li\u003e\n\u003cli\u003eThreaded fittings in gas and potable water systems where certified products are required.\u003c\/li\u003e\n\u003cli\u003eMaintenance work on equipment where fasteners arrive lightly oiled.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to use\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eClean and degrease parts where practical (Loxeal Cleaner 10 recommended); minor oil films are tolerated.\u003c\/li\u003e\n\u003cli\u003eApply enough product to completely fill the engaged threads.\u003c\/li\u003e\n\u003cli\u003eAssemble the parts and hold for the curing time.\u003c\/li\u003e\n\u003cli\u003eOn passive surfaces or in cold conditions, Loxeal Activator 11 speeds curing (may slightly reduce final strength).\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eCure times at +25°C\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandling\u003c\/strong\u003e: 10 to 20 minutes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunctional\u003c\/strong\u003e: 1 to 3 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull cure\u003c\/strong\u003e: 24 to 36 hours depending on substrate, gap and temperature\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eChemistry\u003c\/td\u003e\n\u003ctd\u003eAnaerobic methacrylate resin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eBlue (fluorescent under blue light)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStrength grade\u003c\/td\u003e\n\u003ctd\u003eMedium (dismantlable)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eViscosity at +25°C\u003c\/td\u003e\n\u003ctd\u003e1,700 to 9,000 mPa·s, thixotropic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpecific gravity\u003c\/td\u003e\n\u003ctd\u003eApprox. 1.07 g\/ml\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFriction coefficient\u003c\/td\u003e\n\u003ctd\u003eApprox. 0.10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax thread \/ gap filling\u003c\/td\u003e\n\u003ctd\u003eM36 \/ 0.25 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShear strength\u003c\/td\u003e\n\u003ctd\u003e9 to 13 N\/mm² (ISO 10123)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBreakaway torque\u003c\/td\u003e\n\u003ctd\u003e18 to 23 N·m (ISO 10964)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrevailing torque\u003c\/td\u003e\n\u003ctd\u003e9 to 16 N·m (ISO 10964)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eService temperature\u003c\/td\u003e\n\u003ctd\u003e-55°C to +200°C (+250°C short term)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApprovals\u003c\/td\u003e\n\u003ctd\u003eEN 751-1 (DVGW, Gaz de France), WRAS, UBA, NSF S4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShelf life\u003c\/td\u003e\n\u003ctd\u003e1 year in unopened packaging at up to +25°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eChemical resistance\u003c\/h2\u003e\n\u003cp\u003eExcellent long-term resistance to motor oil and gearbox oil at +125°C, ethanol and biodiesel at room temperature; excellent to good resistance to gasoline, brake fluid and 50 percent water glycol.\u003c\/p\u003e\n\u003ch2\u003eImportant notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFor \u003cstrong\u003emetal\u003c\/strong\u003e fasteners. Liquid product can damage coatings, some plastics and elastomers; stress cracking may develop with some thermoplastics.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot approved\u003c\/strong\u003e for pure oxygen or oxygen-rich systems, and not suitable as a sealant for chlorine or other strong oxidising agents.\u003c\/li\u003e\n\u003cli\u003eFor disassembly use normal tools; if needed heat parts to +150°C to +250°C, remove cured residue mechanically and clean with acetone.\u003c\/li\u003e\n\u003cli\u003eStore cool and dry at or below +25°C. Do not return used product to the bottle.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSafety\u003c\/h2\u003e\n\u003cp\u003eConsult the Safety Data Sheet before use. For professional and industrial use. Follow all handling instructions on the product label.\u003c\/p\u003e\n\u003cp class=\"disclaimer\"\u003e\u003cem\u003eAll technical information is provided as a guide only. Always verify suitability with your specific materials and operating conditions before use.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Loxeal","offers":[{"title":"Default Title","offer_id":54239968526702,"sku":"GA-LOX5503-050","price":39.95,"currency_code":"AUD","in_stock":false}]},{"product_id":"loxeal-55-03-threadlocker-medium-strength-anaerobic-adhesive-10ml","title":"Loxeal 55-03 Threadlocker Medium Strength Anaerobic Adhesive 10ml","description":"\u003cdiv class=\"product-description\"\u003e\n\u003ch1\u003eLoxeal 55-03 Threadlocker Medium Strength Anaerobic Adhesive 10ml\u003c\/h1\u003e\n\u003cp\u003eLoxeal 55-03 is a \u003cstrong\u003emedium strength anaerobic threadlocker\u003c\/strong\u003e for nuts, bolts and studs of all types that may need to be dismantled later with standard hand tools. It \u003cstrong\u003etolerates minor oil contamination\u003c\/strong\u003e on the parts, so it keeps performing where threads are not perfectly clean. Once cured it resists vibration, corrosion, water, gas, oils, hydrocarbons and many other chemicals, and it holds its sealing properties from \u003cstrong\u003e-55°C to +200°C\u003c\/strong\u003e (up to +250°C for short periods), with proven unscrewing resistance at +200°C.\u003c\/p\u003e\n\u003ch2\u003eWhy choose Loxeal 55-03?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMedium strength – assemblies can be dismantled with normal tools when servicing is needed\u003c\/li\u003e\n\u003cli\u003eTolerates light oil contamination on threads\u003c\/li\u003e\n\u003cli\u003eLocks and seals fasteners in one step, stopping loosening caused by vibration\u003c\/li\u003e\n\u003cli\u003eWide service temperature range of -55°C to +200°C\u003c\/li\u003e\n\u003cli\u003eBlue colour, fluorescent under blue light, for easy inspection on the production line\u003c\/li\u003e\n\u003cli\u003eSeals the thread against ingress, helping prevent rust and fretting corrosion\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCertified and approved\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eApproved as a gas-tight sealant for threaded fittings to European norm EN 751-1 (DVGW and Gaz de France)\u003c\/li\u003e\n\u003cli\u003eWRAS approved – suitable for use in contact with potable water\u003c\/li\u003e\n\u003cli\u003eCompliant with the UBA (German Environment Agency) declaration for potable water applications\u003c\/li\u003e\n\u003cli\u003eNSF registered in category S4 as acceptable for use as an adhesive in and around food processing areas\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTypical applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSecuring nuts, bolts, studs and screws on machinery, vehicles and equipment subject to vibration\u003c\/li\u003e\n\u003cli\u003eSealing threaded fittings on gas, water and compressed air lines\u003c\/li\u003e\n\u003cli\u003eAutomotive, plumbing and general maintenance work where later disassembly must remain possible\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to use\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eClean and degrease both parts with Loxeal Cleaner 10 and allow to dry.\u003c\/li\u003e\n\u003cli\u003eApply enough adhesive to completely fill the engaged threads.\u003c\/li\u003e\n\u003cli\u003eAssemble and tighten the fastener to the required torque.\u003c\/li\u003e\n\u003cli\u003eAllow to cure before putting the joint into service. On passive surfaces (e.g. stainless steel, plated parts) or in cold conditions, pre-treat with Loxeal Activator 11 to speed the cure (this may slightly reduce final strength).\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eCure times at +25°C\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHandling strength: 10–20 minutes\u003c\/li\u003e\n\u003cli\u003eFunctional strength: 1–3 hours\u003c\/li\u003e\n\u003cli\u003eFull cure: 3–6 hours (maximum properties develop over 24–36 hours)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eChemistry\u003c\/td\u003e\n\u003ctd\u003eAnaerobic methacrylate resin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eBlue (fluorescent under blue light)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eViscosity (+25°C)\u003c\/td\u003e\n\u003ctd\u003e1,700–9,000 mPa·s, thixotropic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpecific gravity (+25°C)\u003c\/td\u003e\n\u003ctd\u003e1.07\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax thread size \/ gap fill\u003c\/td\u003e\n\u003ctd\u003eM36 \/ 0.25 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShear strength (ISO 10123)\u003c\/td\u003e\n\u003ctd\u003e9–13 N\/mm²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBreakaway torque (ISO 10964)\u003c\/td\u003e\n\u003ctd\u003e18–23 N·m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrevailing torque (ISO 10964)\u003c\/td\u003e\n\u003ctd\u003e9–16 N·m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eService temperature\u003c\/td\u003e\n\u003ctd\u003e-55°C to +200°C (+250°C short term)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShelf life\u003c\/td\u003e\n\u003ctd\u003e1 year in original unopened packaging at up to +25°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eChemical resistance\u003c\/h2\u003e\n\u003cp\u003eManufacturer ageing tests show \u003cstrong\u003eexcellent long-term resistance\u003c\/strong\u003e to motor oil and gearbox oil at +125°C, ethanol and biodiesel, with good resistance to petrol, brake fluid, 50% water\/glycol and acetone after 1,000 hours of exposure.\u003c\/p\u003e\n\u003ch2\u003eImportant notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFormulated for metal substrates only – contact a technical service before use on other materials.\u003c\/li\u003e\n\u003cli\u003eThe liquid adhesive can damage coatings, some plastics and elastomers, and may cause stress cracking in some thermoplastics.\u003c\/li\u003e\n\u003cli\u003eNot approved for use with pure oxygen or oxygen-rich systems, and not suitable for sealing chlorine or other strong oxidising agents.\u003c\/li\u003e\n\u003cli\u003eTo disassemble, use normal tools; if needed, heat parts to +150°C\/+250°C, remove cured residue mechanically and clean with acetone.\u003c\/li\u003e\n\u003cli\u003eStore in a cool, dry place at no more than +25°C and do not return used product to the container.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSafety\u003c\/h2\u003e\n\u003cp\u003eConsult the Safety Data Sheet (SDS) before use. For professional and industrial use.\u003c\/p\u003e\n\u003cp class=\"disclaimer\"\u003e\u003cem\u003eThis information is provided as a general guide only, based on the manufacturer's technical data sheet. Always verify suitability for your specific application and consult the current TDS and SDS before use.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Loxeal","offers":[{"title":"Default Title","offer_id":54240165626222,"sku":"GA-LOX5503-010","price":14.95,"currency_code":"AUD","in_stock":false}]},{"product_id":"loxeal-83-54-threadlocker-high-strength-anaerobic-adhesive-50ml","title":"Loxeal 83-54 Threadlocker High Strength Anaerobic Adhesive 50ml","description":"\u003cdiv class=\"product-description\"\u003e\n\u003ch1\u003eLoxeal 83-54 Threadlocker High Strength Anaerobic Adhesive 50ml\u003c\/h1\u003e\n\u003cp\u003eLoxeal 83-54 is a \u003cstrong\u003ehigh strength anaerobic threadlocker\u003c\/strong\u003e for permanently locking and sealing studs, nuts, bolts and threaded fasteners that are not intended to be dismantled. It can be used on \u003cstrong\u003eall metals\u003c\/strong\u003e, in both free and interference fits, and delivers \u003cstrong\u003ehigh unscrewing resistance with temperature performance up to +200°C\u003c\/strong\u003e. The cured adhesive stands up to heat, corrosion, vibration, water, gases, oils, hydrocarbons and many chemicals, making it a direct alternative to other high-strength studlocks such as Loctite 263.\u003c\/p\u003e\n\u003ch2\u003eWhy choose Loxeal 83-54?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHigh strength, permanent locking for fasteners that must not come loose\u003c\/li\u003e\n\u003cli\u003eStrong prevailing torque of 50–65 N·m keeps holding even after the initial break\u003c\/li\u003e\n\u003cli\u003eService temperature from -55°C to +200°C\u003c\/li\u003e\n\u003cli\u003eSuitable for all metals, in free or forced (press-fit) matings\u003c\/li\u003e\n\u003cli\u003eGreen colour, fluorescent under blue light, for easy quality inspection\u003c\/li\u003e\n\u003cli\u003eSeals the thread, protecting against corrosion and leakage\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTypical applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePermanent locking of studs into engine blocks, housings and castings\u003c\/li\u003e\n\u003cli\u003eHeavy machinery, driveline and suspension fasteners exposed to strong vibration\u003c\/li\u003e\n\u003cli\u003eFasteners on pumps, compressors and equipment where loosening would be a safety risk\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to use\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eClean and degrease both parts with Loxeal Cleaner 10 and allow to dry.\u003c\/li\u003e\n\u003cli\u003eApply enough adhesive to completely fill the engaged threads.\u003c\/li\u003e\n\u003cli\u003eAssemble and tighten the fastener to the required torque.\u003c\/li\u003e\n\u003cli\u003eAllow to cure before loading the joint. On passive surfaces or in cold conditions, pre-treat with Loxeal Activator 11 to accelerate curing.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eCure times at +25°C\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHandling strength: 10–20 minutes\u003c\/li\u003e\n\u003cli\u003eFunctional strength: 1–3 hours\u003c\/li\u003e\n\u003cli\u003eFull cure: 5–10 hours (maximum properties develop over 24–36 hours)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eChemistry\u003c\/td\u003e\n\u003ctd\u003eAnaerobic methacrylate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eGreen (fluorescent under blue light)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eViscosity (+25°C)\u003c\/td\u003e\n\u003ctd\u003e450–650 mPa·s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpecific gravity (+25°C)\u003c\/td\u003e\n\u003ctd\u003e1.1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax thread size \/ gap fill\u003c\/td\u003e\n\u003ctd\u003eM20 \/ 0.15 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShear strength (ISO 10123)\u003c\/td\u003e\n\u003ctd\u003e15–20 N\/mm²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBreakaway torque (ISO 10964)\u003c\/td\u003e\n\u003ctd\u003e25–35 N·m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrevailing torque (ISO 10964)\u003c\/td\u003e\n\u003ctd\u003e50–65 N·m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eService temperature\u003c\/td\u003e\n\u003ctd\u003e-55°C to +200°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShelf life\u003c\/td\u003e\n\u003ctd\u003e1 year in original unopened packaging at up to +25°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eChemical resistance\u003c\/h2\u003e\n\u003cp\u003eManufacturer ageing tests show \u003cstrong\u003eexcellent long-term resistance\u003c\/strong\u003e to petrol and brake fluid at +25°C, good resistance to 50% water\/glycol at +87°C, and good short-term resistance to motor and gearbox oils at +125°C (moderate on extended exposure).\u003c\/p\u003e\n\u003ch2\u003eImportant notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned as a permanent locking product – routine disassembly is not intended.\u003c\/li\u003e\n\u003cli\u003eFormulated for metal substrates only – contact a technical service before use on other materials.\u003c\/li\u003e\n\u003cli\u003eThe liquid adhesive can damage coatings, some plastics and elastomers, and may cause stress cracking in some thermoplastics.\u003c\/li\u003e\n\u003cli\u003eTo disassemble, heat parts to +150°C\/+250°C, use normal tools, then remove cured residue mechanically and clean with acetone.\u003c\/li\u003e\n\u003cli\u003eStore in a cool, dry place at no more than +25°C and do not return used product to the container.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSafety\u003c\/h2\u003e\n\u003cp\u003eConsult the Safety Data Sheet (SDS) before use. For professional and industrial use.\u003c\/p\u003e\n\u003cp class=\"disclaimer\"\u003e\u003cem\u003eThis information is provided as a general guide only, based on the manufacturer's technical data sheet. Always verify suitability for your specific application and consult the current TDS and SDS before use.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Loxeal","offers":[{"title":"Default Title","offer_id":54240166216046,"sku":"GA-LOX8354-050","price":44.95,"currency_code":"AUD","in_stock":false}]},{"product_id":"loxeal-55-14-thread-sealant-anaerobic-adhesive-50ml","title":"Loxeal 55-14 Thread Sealant Anaerobic Adhesive 50ml","description":"\u003cdiv class=\"product-description\"\u003e\n\u003ch1\u003eLoxeal 55-14 Thread Sealant Anaerobic Adhesive 50ml\u003c\/h1\u003e\n\u003cp\u003eLoxeal 55-14 is a \u003cstrong\u003emedium strength anaerobic thread sealant\u003c\/strong\u003e for hydraulic and pneumatic threaded connectors up to 1-1\/2″. It \u003cstrong\u003ereplaces PTFE tape and hemp\u003c\/strong\u003e for sealing against gases, water, LPG, hydrocarbons, oils and many other chemicals. A \u003cstrong\u003emedium thixotropic consistency\u003c\/strong\u003e stops the sealant migrating out of the thread before or during cure, and the cured joint is highly resistant to heat, corrosion, shocks and vibration across a service range of \u003cstrong\u003e-55°C to +150°C\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch2\u003eWhy choose Loxeal 55-14?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eGeneral purpose sealer for hydraulic and pneumatic fittings up to 1-1\/2″\u003c\/li\u003e\n\u003cli\u003eReplaces PTFE tape and hemp – no shredding, no re-taping, no clogged valves\u003c\/li\u003e\n\u003cli\u003eMedium strength – joints can still be dismantled with normal tools\u003c\/li\u003e\n\u003cli\u003eThixotropic formula stays on the thread instead of dripping or migrating\u003c\/li\u003e\n\u003cli\u003eSeals against gases, water, LPG, oils, hydrocarbons and many chemicals\u003c\/li\u003e\n\u003cli\u003eResists shock, vibration and corrosion from -55°C to +150°C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTypical applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSealing threaded connectors on hydraulic and pneumatic systems\u003c\/li\u003e\n\u003cli\u003ePipework carrying water, compressed air, LPG, oils and industrial fluids\u003c\/li\u003e\n\u003cli\u003eGeneral plumbing and maintenance sealing of metal pipe threads\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to use\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eClean and degrease both threads with Loxeal Cleaner 10 and allow to dry.\u003c\/li\u003e\n\u003cli\u003eApply a bead of sealant around the male thread so the gap is completely filled.\u003c\/li\u003e\n\u003cli\u003eAssemble and tighten the connection.\u003c\/li\u003e\n\u003cli\u003eAllow to cure before pressurising. On passive surfaces or in cold conditions, pre-treat with Loxeal Activator 11 to speed the cure.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eCure times at +25°C\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHandling strength: 10–20 minutes\u003c\/li\u003e\n\u003cli\u003eFunctional strength: 1–3 hours\u003c\/li\u003e\n\u003cli\u003eFull cure: 5–10 hours (maximum properties develop over 24–36 hours)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eChemistry\u003c\/td\u003e\n\u003ctd\u003eAnaerobic methacrylate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eRed (fluorescent under blue light)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eViscosity (+25°C)\u003c\/td\u003e\n\u003ctd\u003e2,500–12,000 mPa·s, thixotropic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpecific gravity (+25°C)\u003c\/td\u003e\n\u003ctd\u003e1.05\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax thread size \/ gap fill\u003c\/td\u003e\n\u003ctd\u003eM56 \/ 2″ \/ 0.30 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShear strength (ISO 10123)\u003c\/td\u003e\n\u003ctd\u003e8–12 N\/mm²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBreakaway torque (ISO 10964)\u003c\/td\u003e\n\u003ctd\u003e12–18 N·m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrevailing torque (ISO 10964)\u003c\/td\u003e\n\u003ctd\u003e20–30 N·m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eService temperature\u003c\/td\u003e\n\u003ctd\u003e-55°C to +150°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShelf life\u003c\/td\u003e\n\u003ctd\u003e1 year in original unopened packaging at up to +25°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eImportant notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFormulated for metal threads only – contact a technical service before use on other materials.\u003c\/li\u003e\n\u003cli\u003eThe liquid sealant can damage coatings, some plastics and elastomers, and may cause stress cracking in some thermoplastics.\u003c\/li\u003e\n\u003cli\u003eTo disassemble, use normal tools; if needed, heat parts to +150°C\/+250°C, remove cured residue mechanically and clean with acetone.\u003c\/li\u003e\n\u003cli\u003eStore in a cool, dry place at no more than +25°C and do not return used product to the container.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSafety\u003c\/h2\u003e\n\u003cp\u003eConsult the Safety Data Sheet (SDS) before use. For professional and industrial use.\u003c\/p\u003e\n\u003cp class=\"disclaimer\"\u003e\u003cem\u003eThis information is provided as a general guide only, based on the manufacturer's technical data sheet. Always verify suitability for your specific application and consult the current TDS and SDS before use.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Loxeal","offers":[{"title":"Default Title","offer_id":54240166314350,"sku":"GA-LOX5514-050","price":34.95,"currency_code":"AUD","in_stock":false}]},{"product_id":"loxeal-85-86-thread-sealant-high-temperature-anaerobic-adhesive-50ml","title":"Loxeal 85-86 Thread Sealant High Temperature Anaerobic Adhesive 50ml","description":"\u003cdiv class=\"product-description\"\u003e\n\u003ch1\u003eLoxeal 85-86 Thread Sealant High Temperature Anaerobic Adhesive 50ml\u003c\/h1\u003e\n\u003cp\u003eLoxeal 85-86 is a \u003cstrong\u003ehigh strength anaerobic adhesive for locking and sealing threaded joints\u003c\/strong\u003e on all metals, in both free and forced matings. It \u003cstrong\u003emaintains its sealing performance up to +200°C\u003c\/strong\u003e and offers high resistance to thermal shock, vibration, water, gas, oils, fuels, refrigerant fluids and many other chemicals – making it the choice for hot pipework, gas lines and demanding sealing jobs where standard sealants fall short.\u003c\/p\u003e\n\u003ch2\u003eWhy choose Loxeal 85-86?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSeals and locks in one step with high mechanical strength\u003c\/li\u003e\n\u003cli\u003eKeeps sealing up to \u003cstrong\u003e+200°C\u003c\/strong\u003e (service range -55°C to +200°C)\u003c\/li\u003e\n\u003cli\u003eWorks on all metals, including free and press-fit assemblies\u003c\/li\u003e\n\u003cli\u003eResists thermal shock, vibration, fuels, refrigerants and many chemicals\u003c\/li\u003e\n\u003cli\u003eGenerous gap fill up to 0.30 mm on threads up to M56 \/ 2″\u003c\/li\u003e\n\u003cli\u003eGreen colour, fluorescent under blue light, for easy inspection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCertified and approved\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eApproved for gas-tight threaded joints to EN 751-1 (DIN-DVGW)\u003c\/li\u003e\n\u003cli\u003eWRAS approved for contact with wholesome (potable) water\u003c\/li\u003e\n\u003cli\u003eCompliant with the UBA (German Environment Agency) declaration for potable water use\u003c\/li\u003e\n\u003cli\u003eBAM certified as a sealant in the presence of gaseous oxygen up to 20 bar at +60°C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTypical applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSealing threaded joints on gas, steam, hot water and heating pipework\u003c\/li\u003e\n\u003cli\u003ePotable water fittings (observe the potable-water cure times below)\u003c\/li\u003e\n\u003cli\u003eRefrigeration, fuel and industrial fluid lines exposed to heat and vibration\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to use\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eClean and degrease both threads with Loxeal Cleaner 10 and allow to dry.\u003c\/li\u003e\n\u003cli\u003eApply a continuous bead circumferentially, 1–2 threads back from the leading edge, using enough product to give a complete seal.\u003c\/li\u003e\n\u003cli\u003eAssemble and tighten the joint, then wipe off any uncured excess.\u003c\/li\u003e\n\u003cli\u003eAllow to cure before pressurising. On passive surfaces or in cold conditions, pre-treat with Loxeal Activator 11 (this may reduce final strength).\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eCure times at +25°C\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHandling strength: 10–40 minutes\u003c\/li\u003e\n\u003cli\u003eFunctional strength: 6–12 hours\u003c\/li\u003e\n\u003cli\u003eFull cure: 24–36 hours\u003c\/li\u003e\n\u003cli\u003eBefore contact with potable water: allow 24 hours at +20°C for brass, copper and cast iron; 7 days for stainless steel and aluminium\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eChemistry\u003c\/td\u003e\n\u003ctd\u003eAnaerobic methacrylate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eGreen (fluorescent under blue light)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eViscosity (+25°C)\u003c\/td\u003e\n\u003ctd\u003e2,200–4,000 mPa·s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpecific gravity (+25°C)\u003c\/td\u003e\n\u003ctd\u003e1.05\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax thread size \/ gap fill\u003c\/td\u003e\n\u003ctd\u003eM56 \/ 2″ \/ 0.30 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShear strength (ISO 10123)\u003c\/td\u003e\n\u003ctd\u003e15–25 N\/mm²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBreakaway torque (ISO 10964)\u003c\/td\u003e\n\u003ctd\u003e25–35 N·m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrevailing torque (ISO 10964)\u003c\/td\u003e\n\u003ctd\u003e40–55 N·m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eService temperature\u003c\/td\u003e\n\u003ctd\u003e-55°C to +200°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShelf life\u003c\/td\u003e\n\u003ctd\u003e1 year in original unopened packaging at up to +25°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eImportant notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRecommended for metal thread joints only – contact a technical service before use on other materials.\u003c\/li\u003e\n\u003cli\u003eDo not contaminate the adhesive with metal; cut the nozzle to the required bead size.\u003c\/li\u003e\n\u003cli\u003eThe liquid product can damage coatings, some plastics and elastomers, and may cause stress cracking in some thermoplastics.\u003c\/li\u003e\n\u003cli\u003eHigh strength – for disassembly, heat parts to +150°C\/+250°C, use normal tools, then remove cured residue mechanically and clean with acetone.\u003c\/li\u003e\n\u003cli\u003eStore in a cool, dry place at no more than +25°C and do not return used product to the container.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSafety\u003c\/h2\u003e\n\u003cp\u003eConsult the Safety Data Sheet (SDS) before use. For professional and industrial use.\u003c\/p\u003e\n\u003cp class=\"disclaimer\"\u003e\u003cem\u003eThis information is provided as a general guide only, based on the manufacturer's technical data sheet. Always verify suitability for your specific application and consult the current TDS and SDS before use.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Loxeal","offers":[{"title":"Default Title","offer_id":54240166379886,"sku":"GA-LOX8586-050","price":39.95,"currency_code":"AUD","in_stock":false}]},{"product_id":"loxeal-53-11-retaining-compound-anaerobic-adhesive-50ml","title":"Loxeal 53-11 Retaining Compound Anaerobic Adhesive 50ml","description":"\u003cdiv class=\"product-description\"\u003e\n\u003ch1\u003eLoxeal 53-11 Retaining Compound Anaerobic Adhesive 50ml\u003c\/h1\u003e\n\u003cp\u003eLoxeal 53-11 is a \u003cstrong\u003emedium strength anaerobic retaining compound\u003c\/strong\u003e for fixing \u003cstrong\u003ebearings, liners, bushes, keys and splines\u003c\/strong\u003e into housings and onto shafts. It fills the space between cylindrical parts to give 100% surface contact, boosting load-carrying capacity while still allowing disassembly with standard workshop methods. The cured adhesive is highly resistant to heat, corrosion, vibration, water, gases, oils, hydrocarbons and many chemicals across a service range of \u003cstrong\u003e-55°C to +150°C\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch2\u003eWhy choose Loxeal 53-11?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eGeneral purpose retainer for bearings, bushes, liners, keys and splines\u003c\/li\u003e\n\u003cli\u003eMedium strength – parts remain serviceable and can be dismantled\u003c\/li\u003e\n\u003cli\u003eFills the joint completely, preventing fretting corrosion between mating parts\u003c\/li\u003e\n\u003cli\u003eIncreases load transmission compared with a mechanical fit alone\u003c\/li\u003e\n\u003cli\u003eLow viscosity wicks into close-fitting cylindrical assemblies\u003c\/li\u003e\n\u003cli\u003eResists vibration, oils, fuels and many chemicals from -55°C to +150°C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTypical applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRetaining bearings and bushes in housings and on shafts\u003c\/li\u003e\n\u003cli\u003eSecuring cylinder liners, keys, splines and sleeves\u003c\/li\u003e\n\u003cli\u003eWorkshop repairs to restore security in worn cylindrical fits\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to use\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eClean and degrease both parts with Loxeal Cleaner 10 and allow to dry.\u003c\/li\u003e\n\u003cli\u003eApply the adhesive so the bond gap is completely filled.\u003c\/li\u003e\n\u003cli\u003eAssemble the parts, seating them fully, and hold in position for the cure time.\u003c\/li\u003e\n\u003cli\u003eAllow to cure before loading. On passive surfaces or in cold conditions, pre-treat with Loxeal Activator 11 to accelerate curing.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eCure times at +25°C\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHandling strength: 10–20 minutes\u003c\/li\u003e\n\u003cli\u003eFunctional strength: 1–3 hours\u003c\/li\u003e\n\u003cli\u003eFull cure: 3–6 hours (maximum properties develop over 24–36 hours)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eChemistry\u003c\/td\u003e\n\u003ctd\u003eAnaerobic methacrylate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eYellow (fluorescent under blue light)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eViscosity (+25°C)\u003c\/td\u003e\n\u003ctd\u003e400–650 mPa·s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpecific gravity (+25°C)\u003c\/td\u003e\n\u003ctd\u003e1.05\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax thread size \/ gap fill\u003c\/td\u003e\n\u003ctd\u003eM20 \/ 0.12 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShear strength (ISO 10123)\u003c\/td\u003e\n\u003ctd\u003e8–12 N\/mm²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBreakaway torque (ISO 10964)\u003c\/td\u003e\n\u003ctd\u003e11–20 N·m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrevailing torque (ISO 10964)\u003c\/td\u003e\n\u003ctd\u003e15–25 N·m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpact strength (ASTM D-950)\u003c\/td\u003e\n\u003ctd\u003e1–5 kJ\/m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eService temperature\u003c\/td\u003e\n\u003ctd\u003e-55°C to +150°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShelf life\u003c\/td\u003e\n\u003ctd\u003e1 year in original unopened packaging at up to +25°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eChemical resistance\u003c\/h2\u003e\n\u003cp\u003eManufacturer ageing tests show \u003cstrong\u003eexcellent long-term resistance\u003c\/strong\u003e to motor oil and gearbox oil at +125°C, petrol and brake fluid at +25°C (out to 5,000 hours), with good resistance to 50% water\/glycol at +87°C.\u003c\/p\u003e\n\u003ch2\u003eImportant notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFormulated for metal substrates only – contact a technical service before use on other materials.\u003c\/li\u003e\n\u003cli\u003eThe liquid adhesive can damage coatings, some plastics and elastomers, and may cause stress cracking in some thermoplastics.\u003c\/li\u003e\n\u003cli\u003eTo disassemble, use normal tools; if needed, heat parts to +150°C\/+250°C, remove cured residue mechanically and clean with acetone.\u003c\/li\u003e\n\u003cli\u003eStore in a cool, dry place at no more than +25°C and do not return used product to the container.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSafety\u003c\/h2\u003e\n\u003cp\u003eConsult the Safety Data Sheet (SDS) before use. For professional and industrial use.\u003c\/p\u003e\n\u003cp class=\"disclaimer\"\u003e\u003cem\u003eThis information is provided as a general guide only, based on the manufacturer's technical data sheet. Always verify suitability for your specific application and consult the current TDS and SDS before use.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Loxeal","offers":[{"title":"Default Title","offer_id":54240167002478,"sku":"GA-LOX5311-050","price":39.95,"currency_code":"AUD","in_stock":false}]},{"product_id":"loxeal-82-21-retaining-compound-fast-cure-anaerobic-adhesive-50ml","title":"Loxeal 82-21 Retaining Compound Fast Cure Anaerobic Adhesive 50ml","description":"\u003cdiv class=\"product-description\"\u003e\n\u003ch1\u003eLoxeal 82-21 Retaining Compound Fast Cure Anaerobic Adhesive 50ml\u003c\/h1\u003e\n\u003cp\u003eLoxeal 82-21 is a \u003cstrong\u003efast curing, high strength anaerobic retaining compound\u003c\/strong\u003e for close-fitting cylindrical parts – \u003cstrong\u003eshafts, bushes, pulleys and rotors\u003c\/strong\u003e. Its low viscosity flows into precise fits, reaching handling strength in as little as \u003cstrong\u003e5–10 minutes\u003c\/strong\u003e, and cures to a tough bond with 17–22 N\/mm² shear strength. The cured adhesive is highly resistant to heat, corrosion, vibration, water, gases, oils and hydrocarbons across a service range of \u003cstrong\u003e-55°C to +150°C\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch2\u003eWhy choose Loxeal 82-21?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFast fixture – handling strength in 5–10 minutes keeps jobs moving\u003c\/li\u003e\n\u003cli\u003eHigh strength bond for permanent retention of close-fitted parts\u003c\/li\u003e\n\u003cli\u003eLow viscosity penetrates precise cylindrical fits (up to 0.10 mm gap)\u003c\/li\u003e\n\u003cli\u003eHigh impact strength of 11–15 kJ\/m² for parts under shock loading\u003c\/li\u003e\n\u003cli\u003eFills the joint completely, preventing fretting corrosion\u003c\/li\u003e\n\u003cli\u003eResists vibration and many chemicals from -55°C to +150°C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTypical applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBonding pulleys, gears and rotors onto shafts\u003c\/li\u003e\n\u003cli\u003eRetaining bushes and bearings in precision housings\u003c\/li\u003e\n\u003cli\u003eProduction assembly where fast fixture times are needed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to use\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eClean and degrease both parts with Loxeal Cleaner 10 and allow to dry.\u003c\/li\u003e\n\u003cli\u003eApply the adhesive so the bond gap is completely filled.\u003c\/li\u003e\n\u003cli\u003eAssemble the parts promptly, seating them fully, and hold for the fixture time.\u003c\/li\u003e\n\u003cli\u003eAllow to cure before loading. On passive surfaces or in cold conditions, pre-treat with Loxeal Activator 11 to accelerate curing.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eCure times at +25°C\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHandling strength: 5–10 minutes\u003c\/li\u003e\n\u003cli\u003eFunctional strength: 1–3 hours\u003c\/li\u003e\n\u003cli\u003eFull cure: 3–6 hours (maximum properties develop over 24–36 hours)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eChemistry\u003c\/td\u003e\n\u003ctd\u003eAnaerobic methacrylate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eGreen\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eViscosity (+25°C)\u003c\/td\u003e\n\u003ctd\u003e120–180 mPa·s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpecific gravity (+25°C)\u003c\/td\u003e\n\u003ctd\u003e1.1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax thread size \/ gap fill\u003c\/td\u003e\n\u003ctd\u003eM12 \/ 0.10 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShear strength (ISO 10123)\u003c\/td\u003e\n\u003ctd\u003e17–22 N\/mm²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBreakaway torque (ISO 10964)\u003c\/td\u003e\n\u003ctd\u003e24–35 N·m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrevailing torque (ISO 10964)\u003c\/td\u003e\n\u003ctd\u003e50–60 N·m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpact strength (ASTM D-950)\u003c\/td\u003e\n\u003ctd\u003e11–15 kJ\/m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eService temperature\u003c\/td\u003e\n\u003ctd\u003e-55°C to +150°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShelf life\u003c\/td\u003e\n\u003ctd\u003e1 year in original unopened packaging at up to +25°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eChemical resistance\u003c\/h2\u003e\n\u003cp\u003eManufacturer ageing tests show \u003cstrong\u003eexcellent long-term resistance\u003c\/strong\u003e to refrigerants (Freon) at +25°C, excellent resistance to petrol out to 500 hours, and moderate resistance to motor and gearbox oils at +40°C over extended exposure.\u003c\/p\u003e\n\u003ch2\u003eImportant notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHigh strength – intended as a permanent retaining bond.\u003c\/li\u003e\n\u003cli\u003eFormulated for metal substrates only – contact a technical service before use on other materials.\u003c\/li\u003e\n\u003cli\u003eThe liquid adhesive can damage coatings, some plastics and elastomers, and may cause stress cracking in some thermoplastics.\u003c\/li\u003e\n\u003cli\u003eTo disassemble, heat parts to +150°C\/+250°C, use normal tools, then remove cured residue mechanically and clean with acetone.\u003c\/li\u003e\n\u003cli\u003eStore in a cool, dry place at no more than +25°C and do not return used product to the container.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSafety\u003c\/h2\u003e\n\u003cp\u003eConsult the Safety Data Sheet (SDS) before use. For professional and industrial use.\u003c\/p\u003e\n\u003cp class=\"disclaimer\"\u003e\u003cem\u003eThis information is provided as a general guide only, based on the manufacturer's technical data sheet. Always verify suitability for your specific application and consult the current TDS and SDS before use.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Loxeal","offers":[{"title":"Default Title","offer_id":54240167100782,"sku":"GA-LOX8221-050","price":44.95,"currency_code":"AUD","in_stock":false}]},{"product_id":"loxeal-58-14-gasketing-anaerobic-adhesive-75ml","title":"Loxeal 58-14 Gasketing Anaerobic Adhesive 75ml","description":"\u003cdiv class=\"product-description\"\u003e\n\u003ch1\u003eLoxeal 58-14 Gasketing Anaerobic Adhesive 75ml\u003c\/h1\u003e\n\u003cp\u003eLoxeal 58-14 is a \u003cstrong\u003emedium-strength anaerobic gasketing adhesive\u003c\/strong\u003e that forms a flexible in-place gasket between flange faces, doing away with pre-cut solid gaskets. The \u003cstrong\u003ehighly thixotropic\u003c\/strong\u003e formula stays exactly where it is applied without migrating before or during cure, and the cured film seals dependably against \u003cstrong\u003egases, water, LPG, fuels, oils and many other chemicals\u003c\/strong\u003e across a service range of \u003cstrong\u003e-55°C to +150°C\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch2\u003eWhy choose Loxeal 58-14?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOne liquid gasket replaces an inventory of pre-formed paper, cork and plastic gaskets\u003c\/li\u003e\n\u003cli\u003eFlexible cured film shrugs off shocks and vibration\u003c\/li\u003e\n\u003cli\u003eThixotropic — stays put on vertical and horizontal flanges\u003c\/li\u003e\n\u003cli\u003eFills gaps up to 0.50 mm and compensates for minor surface imperfections\u003c\/li\u003e\n\u003cli\u003eAssemblies can be dismantled later with standard workshop tools\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTypical applications\u003c\/h2\u003e\n\u003cp\u003eGasketing and sealing of flange joints on pumps, gearboxes, differential housings and similar close-fitting metal assemblies in automotive workshops, plant maintenance and general engineering.\u003c\/p\u003e\n\u003ch2\u003eHow to use\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eClean and degrease both flange faces (Loxeal Cleaner 10 recommended).\u003c\/li\u003e\n\u003cli\u003eApply a continuous bead so the joint gap is completely filled.\u003c\/li\u003e\n\u003cli\u003eAssemble the parts and hold them in position while the adhesive cures.\u003c\/li\u003e\n\u003cli\u003eOn passive metals or in cold conditions, accelerate the cure with Loxeal Activator 11.\u003c\/li\u003e\n\u003cli\u003eTo dismantle, use normal tools (heating the parts to +150°C\/+250°C helps if needed), remove cured residue mechanically and clean up with acetone.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eCure times\u003c\/h2\u003e\n\u003cp\u003eAt +25°C on steel: handling strength in \u003cstrong\u003e15–30 minutes\u003c\/strong\u003e, functional strength in \u003cstrong\u003e3–6 hours\u003c\/strong\u003e and full cure in around \u003cstrong\u003e24 hours\u003c\/strong\u003e. Cure speed varies with gap size, substrate and temperature.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eChemistry\u003c\/td\u003e\n\u003ctd\u003eAnaerobic methacrylate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eOrange\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eViscosity (+25°C)\u003c\/td\u003e\n\u003ctd\u003e28,000–100,000 mPa·s, highly thixotropic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpecific gravity (+25°C)\u003c\/td\u003e\n\u003ctd\u003eApprox. 1.1 g\/ml\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum gap fill\u003c\/td\u003e\n\u003ctd\u003e0.50 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShear strength (ISO 4587)\u003c\/td\u003e\n\u003ctd\u003e5–10 N\/mm²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength (ISO 6922)\u003c\/td\u003e\n\u003ctd\u003e5–8 N\/mm²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpact strength (ASTM D-950)\u003c\/td\u003e\n\u003ctd\u003e3–5 kJ\/m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eService temperature\u003c\/td\u003e\n\u003ctd\u003e-55°C to +150°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlash point\u003c\/td\u003e\n\u003ctd\u003e\u0026gt; +100°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShelf life\u003c\/td\u003e\n\u003ctd\u003e1 year at +25°C in original unopened packaging\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eChemical resistance\u003c\/h2\u003e\n\u003cp\u003eOnce fully cured, Loxeal 58-14 shows \u003cstrong\u003eexcellent resistance to motor oil and gearbox oil at +125°C\u003c\/strong\u003e out to 1,000 hours, and good long-term resistance to gasoline and to 50% water\/glycol mixtures at +87°C.\u003c\/p\u003e\n\u003ch2\u003eImportant notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFormulated for metal surfaces — contact a technical adviser before use on non-metal parts.\u003c\/li\u003e\n\u003cli\u003eThe liquid adhesive can attack coatings, some plastics and elastomers, and may induce delayed stress-cracking in certain thermoplastics.\u003c\/li\u003e\n\u003cli\u003eStore in a cool, dry place at no more than +25°C and never return used product to the container.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSafety\u003c\/h2\u003e\n\u003cp\u003eConsult the Safety Data Sheet (SDS) before use and follow standard workshop hygiene practices.\u003c\/p\u003e\n\u003cp class=\"disclaimer\"\u003e\u003cem\u003eThe information above is provided as a general guide only, based on the manufacturer's technical data. Always confirm suitability for your specific application before use.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Loxeal","offers":[{"title":"Default Title","offer_id":54240172179822,"sku":"GA-LOX5814-075","price":49.95,"currency_code":"AUD","in_stock":false}]},{"product_id":"loxeal-58-31-gasketing-elastic-anaerobic-adhesive-75ml","title":"Loxeal 58-31 Gasketing Elastic Anaerobic Adhesive 75ml","description":"\u003cdiv class=\"product-description\"\u003e\n\u003ch1\u003eLoxeal 58-31 Gasketing Elastic Anaerobic Adhesive 75ml\u003c\/h1\u003e\n\u003cp\u003eLoxeal 58-31 is a \u003cstrong\u003ehigh-performance anaerobic gasketing adhesive\u003c\/strong\u003e that cures to an \u003cstrong\u003eelastic, flexible film\u003c\/strong\u003e, replacing solid pre-formed gaskets on flange joints. It seals against \u003cstrong\u003egases, water, LPG, fuels, oils and a wide range of chemicals\u003c\/strong\u003e, resists shocks and vibration, and keeps sealing from \u003cstrong\u003e-55°C right up to +180°C\u003c\/strong\u003e. The thixotropic consistency stops the sealant migrating before or during cure, and the red adhesive \u003cstrong\u003efluoresces under blue light\u003c\/strong\u003e for easy inspection on the production line.\u003c\/p\u003e\n\u003ch2\u003eWhy choose Loxeal 58-31?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eElastic cured film accommodates joint movement while maintaining the seal\u003c\/li\u003e\n\u003cli\u003eHigher strength and faster fixture than general-purpose flange sealants\u003c\/li\u003e\n\u003cli\u003eExtended service temperature to +180°C\u003c\/li\u003e\n\u003cli\u003eThixotropic — no running or migration on vertical flanges\u003c\/li\u003e\n\u003cli\u003eFluorescent under blue light for quality-control checks\u003c\/li\u003e\n\u003cli\u003eDismantles with standard tools when service is required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTypical applications\u003c\/h2\u003e\n\u003cp\u003eSealing flange joints on pumps, gearboxes and differential housings where an elastic, vibration-resistant gasket and elevated temperature capability are needed — demanding automotive, transport and industrial maintenance work.\u003c\/p\u003e\n\u003ch2\u003eHow to use\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eClean and degrease the flange faces (Loxeal Cleaner 10 recommended).\u003c\/li\u003e\n\u003cli\u003eApply enough product to fill the joint gap completely.\u003c\/li\u003e\n\u003cli\u003eAssemble the parts and hold them in place while curing.\u003c\/li\u003e\n\u003cli\u003eUse Loxeal Activator 11 for faster cure on passive metals or at low temperatures.\u003c\/li\u003e\n\u003cli\u003eTo dismantle, use normal tools (heat to +150°C\/+250°C if necessary), remove cured residue mechanically and clean with acetone.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eCure times\u003c\/h2\u003e\n\u003cp\u003eAt +25°C on steel: handling strength in \u003cstrong\u003e10–20 minutes\u003c\/strong\u003e, functional strength in \u003cstrong\u003e1–3 hours\u003c\/strong\u003e and full cure in \u003cstrong\u003e6–12 hours\u003c\/strong\u003e. Cure speed varies with gap, substrate and temperature.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eChemistry\u003c\/td\u003e\n\u003ctd\u003eAnaerobic methacrylate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eRed (fluorescent under blue light)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eViscosity (+25°C)\u003c\/td\u003e\n\u003ctd\u003e70–600 Pa·s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpecific gravity (+25°C)\u003c\/td\u003e\n\u003ctd\u003eApprox. 1.1 g\/ml\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum gap fill\u003c\/td\u003e\n\u003ctd\u003e0.50 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBreakaway torque (ISO 10964)\u003c\/td\u003e\n\u003ctd\u003e15–25 N·m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrevailing torque (ISO 10964)\u003c\/td\u003e\n\u003ctd\u003e18–28 N·m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShear strength (ISO 4587)\u003c\/td\u003e\n\u003ctd\u003e8–13 N\/mm²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength (ISO 6922)\u003c\/td\u003e\n\u003ctd\u003e7–10 N\/mm²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpact strength (ASTM D-950)\u003c\/td\u003e\n\u003ctd\u003e4–7 kJ\/m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eService temperature\u003c\/td\u003e\n\u003ctd\u003e-55°C to +180°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlash point\u003c\/td\u003e\n\u003ctd\u003e\u0026gt; +100°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShelf life\u003c\/td\u003e\n\u003ctd\u003e1 year at +25°C in original unopened packaging\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eChemical resistance\u003c\/h2\u003e\n\u003cp\u003eFully cured Loxeal 58-31 offers \u003cstrong\u003eexcellent resistance to motor oil and gearbox oil at +125°C\u003c\/strong\u003e through 1,000 hours, excellent-to-good resistance to hot 50% water\/glycol mixtures, and moderate resistance to gasoline on prolonged exposure.\u003c\/p\u003e\n\u003ch2\u003eImportant notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRecommended for metal surfaces — seek technical advice before applying to non-metal parts.\u003c\/li\u003e\n\u003cli\u003eUncured adhesive can damage coatings, some plastics and elastomers, and may cause delayed stress-cracking in certain thermoplastics.\u003c\/li\u003e\n\u003cli\u003eStore cool and dry at no more than +25°C; do not refill containers with used product.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSafety\u003c\/h2\u003e\n\u003cp\u003eConsult the Safety Data Sheet (SDS) before use.\u003c\/p\u003e\n\u003cp class=\"disclaimer\"\u003e\u003cem\u003eThe information above is provided as a general guide only, based on the manufacturer's technical data. Always confirm suitability for your specific application before use.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Loxeal","offers":[{"title":"Default Title","offer_id":54240172966254,"sku":"GA-LOX5831-075","price":59.95,"currency_code":"AUD","in_stock":false}]},{"product_id":"loxeal-59-10-gasketing-high-temperature-anaerobic-adhesive-75ml","title":"Loxeal 59-10 Gasketing High Temperature Anaerobic Adhesive 75ml","description":"\u003cdiv class=\"product-description\"\u003e\n\u003ch1\u003eLoxeal 59-10 Gasketing High Temperature Anaerobic Adhesive 75ml\u003c\/h1\u003e\n\u003cp\u003eLoxeal 59-10 is a \u003cstrong\u003esingle-component, medium-strength anaerobic flange sealant\u003c\/strong\u003e with \u003cstrong\u003eoutstanding heat resistance up to +200°C\u003c\/strong\u003e. It cures at room temperature when confined without air between close-fitting metal surfaces, forming a durable in-place gasket that replaces pre-formed gaskets, allows wider machining tolerances and still permits \u003cstrong\u003edismantling with normal tools\u003c\/strong\u003e. The cured seal is highly resistant to \u003cstrong\u003evibration, heat, water, gases, LPG, oils, fuels and many chemicals\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch2\u003eWhy choose Loxeal 59-10?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eService temperature from -55°C to +200°C — ideal for hot-running assemblies\u003c\/li\u003e\n\u003cli\u003eReplaces pre-formed gaskets and assures true metal-to-metal contact\u003c\/li\u003e\n\u003cli\u003eFills gaps up to 0.50 mm, accommodating greater machining tolerances\u003c\/li\u003e\n\u003cli\u003eHighly resistant to vibration, oils, hydrocarbons and coolants\u003c\/li\u003e\n\u003cli\u003eParts remain serviceable — dismantle with everyday workshop tools\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTypical applications\u003c\/h2\u003e\n\u003cp\u003eSealing flat, rigid flange joints on pumps, gearboxes, camshaft blocks and motor flanges — anywhere a heat-tolerant, vibration-proof formed-in-place gasket is required.\u003c\/p\u003e\n\u003ch2\u003eHow to use\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eClean and degrease the mating surfaces (Loxeal Cleaner 10 recommended).\u003c\/li\u003e\n\u003cli\u003eApply enough product to fill the joint gap completely.\u003c\/li\u003e\n\u003cli\u003eBring the parts together and leave undisturbed until cured.\u003c\/li\u003e\n\u003cli\u003eOn passivated surfaces or at low temperature, use Loxeal Activator 11 to speed the cure.\u003c\/li\u003e\n\u003cli\u003eFor disassembly, use normal tools (heat to +150°C\/+250°C if needed), remove cured residue mechanically and clean with acetone.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eCure times\u003c\/h2\u003e\n\u003cp\u003eAt +25°C on steel: handling strength in \u003cstrong\u003e15–30 minutes\u003c\/strong\u003e, functional strength in \u003cstrong\u003e3–6 hours\u003c\/strong\u003e and full cure in \u003cstrong\u003e6–12 hours\u003c\/strong\u003e. Cure speed depends on substrate, gap and temperature.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eChemistry\u003c\/td\u003e\n\u003ctd\u003eAnaerobic methacrylate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eRed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eViscosity (+25°C)\u003c\/td\u003e\n\u003ctd\u003e50–300 Pa·s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpecific gravity (+25°C)\u003c\/td\u003e\n\u003ctd\u003eApprox. 1.05 g\/ml\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum gap fill\u003c\/td\u003e\n\u003ctd\u003e0.50 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShear strength (ISO 4587)\u003c\/td\u003e\n\u003ctd\u003e5–10 N\/mm²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength (ISO 6922)\u003c\/td\u003e\n\u003ctd\u003e6–8 N\/mm²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpact strength (ASTM D-950)\u003c\/td\u003e\n\u003ctd\u003e3–5 kJ\/m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eService temperature\u003c\/td\u003e\n\u003ctd\u003e-55°C to +200°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlash point\u003c\/td\u003e\n\u003ctd\u003e\u0026gt; +100°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShelf life\u003c\/td\u003e\n\u003ctd\u003e1 year at +25°C in original unopened packaging\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eChemical resistance\u003c\/h2\u003e\n\u003cp\u003eAfter full cure, Loxeal 59-10 maintains \u003cstrong\u003eexcellent resistance to motor oil and gearbox oil at +125°C\u003c\/strong\u003e and to 50% water\/glycol coolant at +87°C through 1,000 hours; resistance to gasoline is excellent initially, reducing with prolonged immersion.\u003c\/p\u003e\n\u003ch2\u003eImportant notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRecommended for metal surfaces — seek technical advice before use on non-metal parts.\u003c\/li\u003e\n\u003cli\u003eLiquid product may damage coated parts and elastomers, and contact with some thermoplastics can induce stress-cracking that is not immediately visible.\u003c\/li\u003e\n\u003cli\u003eStore in a cool, dry place at +25°C or below; never return used product to the container.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSafety\u003c\/h2\u003e\n\u003cp\u003eConsult the Safety Data Sheet (SDS) before use.\u003c\/p\u003e\n\u003cp class=\"disclaimer\"\u003e\u003cem\u003eThe information above is provided as a general guide only, based on the manufacturer's technical data. Always confirm suitability for your specific application before use.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Loxeal","offers":[{"title":"Default Title","offer_id":54240173097326,"sku":"GA-LOX5910-075","price":54.95,"currency_code":"AUD","in_stock":false}]},{"product_id":"loxeal-30-20-uv-curable-adhesive-50ml","title":"Loxeal 30-20 UV-Curable Adhesive 50ml","description":"\u003cdiv class=\"product-description\"\u003e\n\u003ch1\u003eLoxeal 30-20 UV-Curable Adhesive 50ml\u003c\/h1\u003e\n\u003cp\u003eLoxeal 30-20 is a \u003cstrong\u003efast-curing, high-strength UV adhesive\u003c\/strong\u003e purpose-made for \u003cstrong\u003eglass and crystal bonding\u003c\/strong\u003e. Under a suitable UV lamp it sets in as little as \u003cstrong\u003e6–10 seconds\u003c\/strong\u003e, and its \u003cstrong\u003ewater-clear finish with over 98% light transmittance\u003c\/strong\u003e makes joints all but invisible — the go-to choice for decorative tableware, household and furnishing accessories, giftware and fine crystal work.\u003c\/p\u003e\n\u003ch2\u003eWhy choose Loxeal 30-20?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCures in seconds under UV light (365 nm) — parts are handled almost immediately\u003c\/li\u003e\n\u003cli\u003eExceptional optical clarity: clear, colourless, non-yellowing joints\u003c\/li\u003e\n\u003cli\u003eHigh bond strength on glass-to-glass and glass-to-metal assemblies\u003c\/li\u003e\n\u003cli\u003eBridges bond lines from 0.03 mm up to 1.5 mm\u003c\/li\u003e\n\u003cli\u003eConvenient one-part product — no mixing, cures only where the light reaches\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTypical applications\u003c\/h2\u003e\n\u003cp\u003eBonding glass and crystal in decorative tableware, homewares, furnishing accessories, bonbonnières and gift articles; ideal for precious crystal pieces where the joint must stay invisible.\u003c\/p\u003e\n\u003ch2\u003eHow to use\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eEnsure both parts are clean and completely dry.\u003c\/li\u003e\n\u003cli\u003eApply a small amount of adhesive to one surface and bring the parts together.\u003c\/li\u003e\n\u003cli\u003eAt least one part must be UV-transparent — align the assembly before exposure.\u003c\/li\u003e\n\u003cli\u003eCure with a UV source emitting between 365 nm and 420 nm (around 100 mW\/cm² recommended); exposure of 6–10 seconds is typically sufficient.\u003c\/li\u003e\n\u003cli\u003eAllow slightly longer exposure for larger gaps or tinted substrates.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eCure times\u003c\/h2\u003e\n\u003cp\u003eTypical fixture under a suitable UV lamp is \u003cstrong\u003e6–10 seconds\u003c\/strong\u003e. Actual cure time depends on lamp intensity, distance from the light source, bond-line gap and how much UV passes through the substrate.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eChemistry\u003c\/td\u003e\n\u003ctd\u003eMethacrylate ester, UV-curing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eClear \/ colourless\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eViscosity (+25°C)\u003c\/td\u003e\n\u003ctd\u003e2,200–2,900 mPa·s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpecific gravity\u003c\/td\u003e\n\u003ctd\u003e1.1 g\/ml\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGap fill\u003c\/td\u003e\n\u003ctd\u003e0.03–1.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength (ASTM D-2095-69)\u003c\/td\u003e\n\u003ctd\u003e10–14 N\/mm²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardness\u003c\/td\u003e\n\u003ctd\u003eShore D 50–65\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElongation at break\u003c\/td\u003e\n\u003ctd\u003e80–100%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight transmittance\u003c\/td\u003e\n\u003ctd\u003e\u0026gt; 98%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRefractive index\u003c\/td\u003e\n\u003ctd\u003e1.49\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eService temperature\u003c\/td\u003e\n\u003ctd\u003e-55°C to +120°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlash point\u003c\/td\u003e\n\u003ctd\u003e\u0026gt; +100°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShelf life\u003c\/td\u003e\n\u003ctd\u003e1 year at +25°C in original unopened packaging\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eChemical resistance\u003c\/h2\u003e\n\u003cp\u003eCured Loxeal 30-20 shows \u003cstrong\u003eexcellent long-term resistance to alcohol and refrigerant gases\u003c\/strong\u003e and good resistance to gasoline. Sustained exposure to high humidity (90% RH at +40°C) reduces bond performance, so it is best suited to dry indoor service.\u003c\/p\u003e\n\u003ch2\u003eImportant notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAt least one bonded part must transmit UV light for the adhesive to cure.\u003c\/li\u003e\n\u003cli\u003eCure speed drops with tinted or UV-filtering glass — extend exposure accordingly.\u003c\/li\u003e\n\u003cli\u003eNot recommended for permanently damp or wet environments.\u003c\/li\u003e\n\u003cli\u003eStore in a cool, dry place at no more than +25°C, away from daylight; do not return used product to the bottle.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSafety\u003c\/h2\u003e\n\u003cp\u003eConsult the Safety Data Sheet (SDS) before use and avoid looking directly at UV curing lamps without eye protection.\u003c\/p\u003e\n\u003cp class=\"disclaimer\"\u003e\u003cem\u003eThe information above is provided as a general guide only, based on the manufacturer's technical data. Always confirm suitability for your specific application before use.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Loxeal","offers":[{"title":"Default Title","offer_id":54240173752686,"sku":"GA-LOXUV3020-050","price":69.95,"currency_code":"AUD","in_stock":false}]},{"product_id":"loxeal-30-22-uv-curable-high-viscosity-adhesive-50ml","title":"Loxeal 30-22 UV-Curable High Viscosity Adhesive 50ml","description":"\u003cdiv class=\"product-description\"\u003e\n\u003ch1\u003eLoxeal 30-22 UV-Curable High Viscosity Adhesive 50ml\u003c\/h1\u003e\n\u003cp\u003eLoxeal 30-22 is a \u003cstrong\u003efast-curing, high-strength UV adhesive\u003c\/strong\u003e with a \u003cstrong\u003ethicker, higher-viscosity consistency\u003c\/strong\u003e designed for \u003cstrong\u003eglass-to-glass and glass-to-metal bonding\u003c\/strong\u003e. The heavier body gives better control on the joint and lets it bridge \u003cstrong\u003egaps up to 2 mm\u003c\/strong\u003e, while its \u003cstrong\u003ecrystal-clear, non-yellowing finish\u003c\/strong\u003e with over 98% light transmittance keeps even generous bond lines virtually invisible — ideal for precious crystal work.\u003c\/p\u003e\n\u003ch2\u003eWhy choose Loxeal 30-22?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHigh viscosity (5,500–7,500 mPa·s) resists flowing off the joint before cure\u003c\/li\u003e\n\u003cli\u003eFills bond lines from 0.03 mm up to 2 mm — more forgiving on uneven parts\u003c\/li\u003e\n\u003cli\u003eCures in seconds under UV light (365 nm)\u003c\/li\u003e\n\u003cli\u003eClear, colourless joints with excellent optical clarity\u003c\/li\u003e\n\u003cli\u003eStrong bonds on glass-to-glass and glass-to-metal assemblies\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTypical applications\u003c\/h2\u003e\n\u003cp\u003eGlass-to-glass and glass-to-metal bonding in glass furniture, decorative items and crystal ware — especially assemblies with larger or less uniform bond gaps where a runnier adhesive would drain away.\u003c\/p\u003e\n\u003ch2\u003eHow to use\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eEnsure both parts are clean and completely dry.\u003c\/li\u003e\n\u003cli\u003eApply the adhesive to one surface and bring the parts together.\u003c\/li\u003e\n\u003cli\u003eAt least one part must be UV-transparent — position the assembly before exposure.\u003c\/li\u003e\n\u003cli\u003eCure with a UV source emitting between 365 nm and 420 nm (around 100 mW\/cm² recommended); exposure of 6–10 seconds is typically sufficient.\u003c\/li\u003e\n\u003cli\u003eExtend the exposure for wider gaps or substrates that filter UV.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eCure times\u003c\/h2\u003e\n\u003cp\u003eTypical fixture under a suitable UV lamp is \u003cstrong\u003e6–10 seconds\u003c\/strong\u003e. Cure time varies with lamp intensity, distance from the light source, bond-line gap and the light transmittance of the substrate.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eChemistry\u003c\/td\u003e\n\u003ctd\u003eMethacrylate ester, UV-curing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eClear \/ colourless\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eViscosity (+25°C)\u003c\/td\u003e\n\u003ctd\u003e5,500–7,500 mPa·s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpecific gravity\u003c\/td\u003e\n\u003ctd\u003e1.10 g\/ml\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGap fill\u003c\/td\u003e\n\u003ctd\u003e0.03–2 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength (ASTM D-2095-69)\u003c\/td\u003e\n\u003ctd\u003e8–12 N\/mm²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardness\u003c\/td\u003e\n\u003ctd\u003eShore D 50–65\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElongation at break\u003c\/td\u003e\n\u003ctd\u003e80–100%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight transmittance\u003c\/td\u003e\n\u003ctd\u003e\u0026gt; 98%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRefractive index\u003c\/td\u003e\n\u003ctd\u003e1.49\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eService temperature\u003c\/td\u003e\n\u003ctd\u003e-55°C to +120°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlash point\u003c\/td\u003e\n\u003ctd\u003e\u0026gt; +100°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShelf life\u003c\/td\u003e\n\u003ctd\u003e1 year at +25°C in original unopened packaging\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eImportant notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAt least one bonded part must transmit UV light for the adhesive to cure.\u003c\/li\u003e\n\u003cli\u003eCure speed drops with tinted or UV-filtering substrates — extend exposure accordingly.\u003c\/li\u003e\n\u003cli\u003eStore in a cool, dry place at no more than +25°C, away from daylight; do not return used product to the bottle.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSafety\u003c\/h2\u003e\n\u003cp\u003eConsult the Safety Data Sheet (SDS) before use and avoid looking directly at UV curing lamps without eye protection.\u003c\/p\u003e\n\u003cp class=\"disclaimer\"\u003e\u003cem\u003eThe information above is provided as a general guide only, based on the manufacturer's technical data. Always confirm suitability for your specific application before use.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Loxeal","offers":[{"title":"Default Title","offer_id":54240173949294,"sku":"GA-LOXUV3022-050","price":69.95,"currency_code":"AUD","in_stock":false}]},{"product_id":"loxeal-istant-23-super-glue-fluid-cyanoacrylate-adhesive-20g","title":"Loxeal Istant 23 Super Glue Fluid Cyanoacrylate Adhesive 20g","description":"\u003cdiv class=\"product-description\"\u003e\n\u003ch1\u003eLoxeal Istant 23 Super Glue Fluid Cyanoacrylate Adhesive 20g\u003c\/h1\u003e\n\u003cp\u003eLoxeal Istant 23 is a \u003cstrong\u003efluid, general purpose super glue\u003c\/strong\u003e built on ethyl cyanoacrylate chemistry. Its \u003cstrong\u003elow viscosity (40–80 mPa·s)\u003c\/strong\u003e wicks neatly into close-fitting joints, and it \u003cstrong\u003ebonds rubber, metal and most plastics in seconds\u003c\/strong\u003e by reacting with trace moisture on the surfaces. The medium setting speed leaves a short window to seat parts accurately before the adhesive grabs. Supplied in a 20g bottle that suits both the workbench and the kitchen drawer.\u003c\/p\u003e\n\u003ch2\u003eWhy choose Loxeal Istant 23?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFluid, self-wicking formula\u003c\/strong\u003e – flows into tight joints with gaps of 10–60 microns\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast fixture\u003c\/strong\u003e – grabs in as little as 3–30 seconds on common plastics and metals\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGenuinely versatile\u003c\/strong\u003e – one bottle covers rubber, metals and most rigid plastics\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClear, strong bond line\u003c\/strong\u003e – colourless cure with tensile strength of 12–25 N\/mm²\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolvent-free, single part\u003c\/strong\u003e – no mixing, no clamping hardware, straight from the bottle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTypical applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eEveryday repairs across rubber, metal and plastic parts\u003c\/li\u003e\n\u003cli\u003eO-rings, seals and neoprene\/NBR rubber components\u003c\/li\u003e\n\u003cli\u003eSmall component assembly in production and maintenance work\u003c\/li\u003e\n\u003cli\u003eHousehold and hobby fixes where a fast, tidy bond is needed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to use\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eClean and degrease both surfaces and allow them to dry fully.\u003c\/li\u003e\n\u003cli\u003eApply a small amount of adhesive to one surface only – with super glue, less is more.\u003c\/li\u003e\n\u003cli\u003eBring the parts together promptly, align, and hold with light pressure for a few seconds.\u003c\/li\u003e\n\u003cli\u003eLeave the joint undisturbed while strength develops; avoid heavy loads until fully cured.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eCure times\u003c\/h2\u003e\n\u003cp\u003eFixture speed depends on the substrate, gap, temperature and humidity. Typical fixture times: neoprene\/NBR under 5 seconds; PVC 3–10 seconds; aluminium 5–15 seconds; steel 10–30 seconds; ABS 10–30 seconds; zinc 30–90 seconds. Allow up to 24 hours for full strength. If setting is too slow, pair it with Loxeal Activator 9; for polyethylene, polypropylene, silicone rubber or PTFE, prime first with Loxeal Primer 7.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eChemistry\u003c\/td\u003e\n\u003ctd\u003eEthyl cyanoacrylate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eClear \/ colourless\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eViscosity (+25°C)\u003c\/td\u003e\n\u003ctd\u003e40–80 mPa·s (fluid)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGap fill\u003c\/td\u003e\n\u003ctd\u003e10–60 microns\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFixture time\u003c\/td\u003e\n\u003ctd\u003e3–90 seconds, substrate dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength\u003c\/td\u003e\n\u003ctd\u003e12–25 N\/mm² (ISO 6922)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eService temperature\u003c\/td\u003e\n\u003ctd\u003e-50°C to +80°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShelf life\u003c\/td\u003e\n\u003ctd\u003e12 months in original unopened packaging\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack size\u003c\/td\u003e\n\u003ctd\u003e20g bottle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eImportant notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBonds skin instantly\u003c\/strong\u003e – avoid contact with skin and eyes, and keep away from children.\u003c\/li\u003e\n\u003cli\u003eStore in a cool, dry place below +20°C; refrigeration at +2°C\/+7°C extends shelf life. Do not refill containers with used product.\u003c\/li\u003e\n\u003cli\u003eProlonged exposure to very humid conditions can reduce long-term bond strength.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSafety\u003c\/h2\u003e\n\u003cp\u003eConsult the Safety Data Sheet (SDS) before use. Use in a well-ventilated area and wear suitable protection when handling.\u003c\/p\u003e\n\u003cp class=\"disclaimer\"\u003e\u003cem\u003eThis information is provided as a general guide only. Always test the adhesive on your specific materials and refer to the manufacturer's technical documentation before use.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Loxeal","offers":[{"title":"Default Title","offer_id":54240191545710,"sku":"GA-LOXIS23-020","price":17.95,"currency_code":"AUD","in_stock":false}]},{"product_id":"loxeal-istant-23-super-glue-fluid-cyanoacrylate-adhesive-100g","title":"Loxeal Istant 23 Super Glue Fluid Cyanoacrylate Adhesive 100g","description":"\u003cdiv class=\"product-description\"\u003e\n\u003ch1\u003eLoxeal Istant 23 Super Glue Fluid Cyanoacrylate Adhesive 100g\u003c\/h1\u003e\n\u003cp\u003eLoxeal Istant 23 is a \u003cstrong\u003efluid, general purpose super glue\u003c\/strong\u003e built on ethyl cyanoacrylate chemistry. Its \u003cstrong\u003elow viscosity (40–80 mPa·s)\u003c\/strong\u003e wicks neatly into close-fitting joints, and it \u003cstrong\u003ebonds rubber, metal and most plastics in seconds\u003c\/strong\u003e by reacting with trace moisture on the surfaces. The medium setting speed leaves a short window to seat parts accurately before the adhesive grabs. This \u003cstrong\u003e100g workshop bottle\u003c\/strong\u003e is the economical choice for production lines, maintenance teams and busy workshops that go through super glue regularly.\u003c\/p\u003e\n\u003ch2\u003eWhy choose Loxeal Istant 23?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrade-size 100g bottle\u003c\/strong\u003e – keeps high-use workshops and production benches running\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFluid, self-wicking formula\u003c\/strong\u003e – flows into tight joints with gaps of 10–60 microns\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast fixture\u003c\/strong\u003e – grabs in as little as 3–30 seconds on common plastics and metals\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGenuinely versatile\u003c\/strong\u003e – one bottle covers rubber, metals and most rigid plastics\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolvent-free, single part\u003c\/strong\u003e – clear cure with tensile strength of 12–25 N\/mm²\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTypical applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProduction assembly and repetitive bonding tasks\u003c\/li\u003e\n\u003cli\u003eO-rings, seals and neoprene\/NBR rubber components\u003c\/li\u003e\n\u003cli\u003eMaintenance and repair across rubber, metal and plastic parts\u003c\/li\u003e\n\u003cli\u003eWorkshops and trades that need a reliable everyday instant adhesive in volume\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to use\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eClean and degrease both surfaces and allow them to dry fully.\u003c\/li\u003e\n\u003cli\u003eApply a small amount of adhesive to one surface only – with super glue, less is more.\u003c\/li\u003e\n\u003cli\u003eBring the parts together promptly, align, and hold with light pressure for a few seconds.\u003c\/li\u003e\n\u003cli\u003eLeave the joint undisturbed while strength develops; avoid heavy loads until fully cured.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eCure times\u003c\/h2\u003e\n\u003cp\u003eFixture speed depends on the substrate, gap, temperature and humidity. Typical fixture times: neoprene\/NBR under 5 seconds; PVC 3–10 seconds; aluminium 5–15 seconds; steel 10–30 seconds; ABS 10–30 seconds; zinc 30–90 seconds. Allow up to 24 hours for full strength. If setting is too slow, pair it with Loxeal Activator 9; for polyethylene, polypropylene, silicone rubber or PTFE, prime first with Loxeal Primer 7.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eChemistry\u003c\/td\u003e\n\u003ctd\u003eEthyl cyanoacrylate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eClear \/ colourless\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eViscosity (+25°C)\u003c\/td\u003e\n\u003ctd\u003e40–80 mPa·s (fluid)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGap fill\u003c\/td\u003e\n\u003ctd\u003e10–60 microns\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFixture time\u003c\/td\u003e\n\u003ctd\u003e3–90 seconds, substrate dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength\u003c\/td\u003e\n\u003ctd\u003e12–25 N\/mm² (ISO 6922)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eService temperature\u003c\/td\u003e\n\u003ctd\u003e-50°C to +80°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShelf life\u003c\/td\u003e\n\u003ctd\u003e12 months in original unopened packaging\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack size\u003c\/td\u003e\n\u003ctd\u003e100g bottle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eImportant notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBonds skin instantly\u003c\/strong\u003e – avoid contact with skin and eyes, and keep away from children.\u003c\/li\u003e\n\u003cli\u003eStore in a cool, dry place below +20°C; refrigeration at +2°C\/+7°C extends shelf life. Do not refill containers with used product.\u003c\/li\u003e\n\u003cli\u003eProlonged exposure to very humid conditions can reduce long-term bond strength.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSafety\u003c\/h2\u003e\n\u003cp\u003eConsult the Safety Data Sheet (SDS) before use. Use in a well-ventilated area and wear suitable protection when handling.\u003c\/p\u003e\n\u003cp class=\"disclaimer\"\u003e\u003cem\u003eThis information is provided as a general guide only. Always test the adhesive on your specific materials and refer to the manufacturer's technical documentation before use.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Loxeal","offers":[{"title":"Default Title","offer_id":54240191676782,"sku":"GA-LOXIS23-100","price":54.95,"currency_code":"AUD","in_stock":false}]},{"product_id":"loxeal-istant-25-super-glue-medium-viscosity-cyanoacrylate-adhesive-20g","title":"Loxeal Istant 25 Super Glue Medium Viscosity Cyanoacrylate Adhesive 20g","description":"\u003cdiv class=\"product-description\"\u003e\n\u003ch1\u003eLoxeal Istant 25 Super Glue Medium Viscosity Cyanoacrylate Adhesive 20g\u003c\/h1\u003e\n\u003cp\u003eLoxeal Istant 25 is a \u003cstrong\u003emedium-to-high viscosity super glue\u003c\/strong\u003e based on ethyl cyanoacrylate, designed for \u003cstrong\u003ebonding plastic, rubber, metal and ceramic\u003c\/strong\u003e – including slightly irregular surfaces where a runny glue would simply drain away. At \u003cstrong\u003e350–450 mPa·s\u003c\/strong\u003e it stays where you put it, fills gaps up to 150 microns and fixtures in seconds, with a medium setting speed that gives you a moment to position parts. Supplied in a 20g bottle.\u003c\/p\u003e\n\u003ch2\u003eWhy choose Loxeal Istant 25?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMedium viscosity\u003c\/strong\u003e – controllable application that stays put on the joint\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandles imperfect surfaces\u003c\/strong\u003e – fills gaps of 10–150 microns\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBroad substrate range\u003c\/strong\u003e – plastic, rubber, metal and ceramic with one product\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast, strong fixture\u003c\/strong\u003e – tensile strength of 15–23 N\/mm² when cured\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolvent-free, single part\u003c\/strong\u003e – clean, clear bond line with no mixing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTypical applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRepairs on ceramics, ornaments and household items\u003c\/li\u003e\n\u003cli\u003eBonding rubber and plastic parts with less-than-perfect mating surfaces\u003c\/li\u003e\n\u003cli\u003eMetal-to-plastic and metal-to-rubber assemblies\u003c\/li\u003e\n\u003cli\u003eGeneral workshop, trade and hobby bonding\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to use\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eClean and degrease both surfaces and allow them to dry fully.\u003c\/li\u003e\n\u003cli\u003eApply a modest bead or drops to one surface only.\u003c\/li\u003e\n\u003cli\u003eAssemble the parts promptly, align, and hold with light pressure for a few seconds.\u003c\/li\u003e\n\u003cli\u003eLeave the joint undisturbed while strength develops; avoid heavy loads until fully cured.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eCure times\u003c\/h2\u003e\n\u003cp\u003eFixture speed depends on the substrate, gap, temperature and humidity. Typical fixture times: neoprene\/NBR under 5 seconds; PVC 3–10 seconds; aluminium 5–15 seconds; phenolic resin 5–20 seconds; steel 10–30 seconds; ABS 10–30 seconds; zinc 30–90 seconds. Allow up to 24 hours for full strength. For polyethylene, polypropylene, silicone rubber or PTFE, prime first with Loxeal Primer 7; Loxeal Activator 9 can be used to speed up slow joints.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eChemistry\u003c\/td\u003e\n\u003ctd\u003eEthyl cyanoacrylate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eClear \/ colourless\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eViscosity (+25°C)\u003c\/td\u003e\n\u003ctd\u003e350–450 mPa·s (medium)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGap fill\u003c\/td\u003e\n\u003ctd\u003e10–150 microns\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFixture time\u003c\/td\u003e\n\u003ctd\u003e3–90 seconds, substrate dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength\u003c\/td\u003e\n\u003ctd\u003e15–23 N\/mm² (ISO 6922)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eService temperature\u003c\/td\u003e\n\u003ctd\u003e-50°C to +80°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShelf life\u003c\/td\u003e\n\u003ctd\u003e12 months in original unopened packaging\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack size\u003c\/td\u003e\n\u003ctd\u003e20g bottle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eImportant notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBonds skin instantly\u003c\/strong\u003e – avoid contact with skin and eyes, and keep away from children.\u003c\/li\u003e\n\u003cli\u003eStore in a cool, dry place below +20°C; refrigeration at +2°C\/+7°C extends shelf life. Do not refill containers with used product.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSafety\u003c\/h2\u003e\n\u003cp\u003eConsult the Safety Data Sheet (SDS) before use. Use in a well-ventilated area and wear suitable protection when handling.\u003c\/p\u003e\n\u003cp class=\"disclaimer\"\u003e\u003cem\u003eThis information is provided as a general guide only. Always test the adhesive on your specific materials and refer to the manufacturer's technical documentation before use.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Loxeal","offers":[{"title":"Default Title","offer_id":54240191742318,"sku":"GA-LOXIS25-020","price":22.95,"currency_code":"AUD","in_stock":false}]},{"product_id":"loxeal-istant-27-super-glue-high-viscosity-cyanoacrylate-adhesive-20g","title":"Loxeal Istant 27 Super Glue High Viscosity Cyanoacrylate Adhesive 20g","description":"\u003cdiv class=\"product-description\"\u003e\n\u003ch1\u003eLoxeal Istant 27 Super Glue High Viscosity Cyanoacrylate Adhesive 20g\u003c\/h1\u003e\n\u003cp\u003eLoxeal Istant 27 is a \u003cstrong\u003ehigh viscosity, gap-filling super glue\u003c\/strong\u003e based on ethyl cyanoacrylate, made for \u003cstrong\u003eirregular surfaces on plastic, rubber, metal and ceramic\u003c\/strong\u003e. Its thick \u003cstrong\u003e1,200–1,800 mPa·s\u003c\/strong\u003e consistency bridges gaps up to \u003cstrong\u003e200 microns\u003c\/strong\u003e without running, and its deliberately slower fixture time lets you \u003cstrong\u003eadjust and align parts during assembly\u003c\/strong\u003e before the bond locks in. Supplied in a 20g bottle.\u003c\/p\u003e\n\u003ch2\u003eWhy choose Loxeal Istant 27?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh viscosity, gap-filling formula\u003c\/strong\u003e – fills gaps of 10–200 microns on uneven surfaces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStays where applied\u003c\/strong\u003e – thick consistency will not run out of the joint or drip\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRepositioning window\u003c\/strong\u003e – slower fixture allows parts to be adjusted during assembly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrong final bond\u003c\/strong\u003e – tensile strength of 18–25 N\/mm² when cured\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolvent-free, single part\u003c\/strong\u003e – clear cure straight from the bottle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTypical applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBonding rough, porous or poorly matched surfaces\u003c\/li\u003e\n\u003cli\u003ePlastic and rubber parts with irregular mating faces\u003c\/li\u003e\n\u003cli\u003eCeramic repairs where a runnier glue would soak away or drip\u003c\/li\u003e\n\u003cli\u003eAssemblies that need a few extra seconds of alignment time\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to use\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eClean and degrease both surfaces and allow them to dry fully.\u003c\/li\u003e\n\u003cli\u003eApply a bead of adhesive to one surface only.\u003c\/li\u003e\n\u003cli\u003eAssemble the parts, adjust alignment while the slower fixture time allows, then hold with light pressure.\u003c\/li\u003e\n\u003cli\u003eLeave the joint undisturbed while strength develops; avoid heavy loads until fully cured.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eCure times\u003c\/h2\u003e\n\u003cp\u003eFixture speed depends on the substrate, gap, temperature and humidity. Typical fixture times: neoprene\/NBR under 5 seconds; phenolic resin 10–40 seconds; aluminium 10–30 seconds; ABS 15–40 seconds; PVC 20–50 seconds; steel 20–50 seconds; zinc 40–100 seconds. Allow up to 24 hours for full strength. For polyethylene, polypropylene, silicone rubber or PTFE, prime first with Loxeal Primer 7; Loxeal Activator 9 can be used to speed up slow joints.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eChemistry\u003c\/td\u003e\n\u003ctd\u003eEthyl cyanoacrylate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eClear \/ colourless\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eViscosity (+25°C)\u003c\/td\u003e\n\u003ctd\u003e1,200–1,800 mPa·s (high)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGap fill\u003c\/td\u003e\n\u003ctd\u003e10–200 microns\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFixture time\u003c\/td\u003e\n\u003ctd\u003e5–100 seconds, substrate dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength\u003c\/td\u003e\n\u003ctd\u003e18–25 N\/mm² (ISO 6922)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eService temperature\u003c\/td\u003e\n\u003ctd\u003e-50°C to +80°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShelf life\u003c\/td\u003e\n\u003ctd\u003e12 months in original unopened packaging\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack size\u003c\/td\u003e\n\u003ctd\u003e20g bottle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eImportant notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBonds skin instantly\u003c\/strong\u003e – avoid contact with skin and eyes, and keep away from children.\u003c\/li\u003e\n\u003cli\u003eStore in a cool, dry place below +20°C; refrigeration at +2°C\/+7°C extends shelf life. Do not refill containers with used product.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSafety\u003c\/h2\u003e\n\u003cp\u003eConsult the Safety Data Sheet (SDS) before use. Use in a well-ventilated area and wear suitable protection when handling.\u003c\/p\u003e\n\u003cp class=\"disclaimer\"\u003e\u003cem\u003eThis information is provided as a general guide only. Always test the adhesive on your specific materials and refer to the manufacturer's technical documentation before use.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Loxeal","offers":[{"title":"Default Title","offer_id":54240191807854,"sku":"GA-LOXIS27-020","price":22.95,"currency_code":"AUD","in_stock":false}]},{"product_id":"loxeal-istant-43-speciale-super-glue-cyanoacrylate-adhesive-50g","title":"Loxeal Istant 43 Speciale Super Glue Cyanoacrylate Adhesive 50g","description":"\u003cdiv class=\"product-description\"\u003e\n\u003ch1\u003eLoxeal Istant 43 Speciale Super Glue Cyanoacrylate Adhesive 50g\u003c\/h1\u003e\n\u003cp\u003eLoxeal Istant 43 Speciale (43S) is a \u003cstrong\u003esurface-insensitive, general purpose super glue\u003c\/strong\u003e based on modified ethyl cyanoacrylate. Unfazed by acidic and porous surfaces, it excels at \u003cstrong\u003ebonding leather, wood, fabric, ceramic and metals\u003c\/strong\u003e where ordinary super glues struggle. It offers \u003cstrong\u003eproven heat resistance to +120°C\u003c\/strong\u003e (short peaks to +150°C) and is \u003cstrong\u003eNSF registered for use in and around food processing areas\u003c\/strong\u003e, making it a favourite for demanding trade and industrial work. Supplied in a 50g bottle.\u003c\/p\u003e\n\u003ch2\u003eWhy choose Loxeal Istant 43 Speciale?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface insensitive\u003c\/strong\u003e – cures reliably on acidic and porous substrates like leather, wood and paper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeat resistant\u003c\/strong\u003e – holds strength up to +120°C, with short-term peaks to +150°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNSF registered\u003c\/strong\u003e – acceptable for use as an instant adhesive in and around food processing areas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVery fast on hard-to-glue materials\u003c\/strong\u003e – fabric in 2–20 seconds, leather in 5–15 seconds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrong all-rounder\u003c\/strong\u003e – medium viscosity with tensile strength of 15–25 N\/mm²\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTypical applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLeather goods, footwear and upholstery repairs\u003c\/li\u003e\n\u003cli\u003eWoodworking, trim and joinery fixes across many timber species\u003c\/li\u003e\n\u003cli\u003eEquipment maintenance around commercial kitchens and food processing plants\u003c\/li\u003e\n\u003cli\u003eFabric, ceramic, metal and rubber bonding in workshops and on site\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to use\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eClean and degrease all surfaces and allow them to dry before applying the adhesive.\u003c\/li\u003e\n\u003cli\u003eFor low-energy plastics such as PE, PP or PTFE, apply Loxeal Primer 7 first and let it dry.\u003c\/li\u003e\n\u003cli\u003eApply the adhesive sparingly to one surface, then bring the parts together quickly and correctly aligned – the fast cure leaves little room for repositioning.\u003c\/li\u003e\n\u003cli\u003ePress firmly for a few seconds until fixed, and keep parts clamped until fully set.\u003c\/li\u003e\n\u003cli\u003eWait 24–72 hours for full cure before applying any mechanical stress.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eCure times\u003c\/h2\u003e\n\u003cp\u003eFixture speed depends on the substrate, gap, temperature and humidity. Typical fixture times: paper 1–5 seconds; fabric 2–20 seconds; PVC, ABS and phenolic resin 2–10 seconds; aluminium 2–10 seconds; steel 5–20 seconds; leather 5–15 seconds; ceramic 5–30 seconds; softwoods 5–20 seconds; oak 90–180 seconds. Loxeal Activator 9 can be used to accelerate slow joints. Full cure in 24–72 hours.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eChemistry\u003c\/td\u003e\n\u003ctd\u003eModified ethyl cyanoacrylate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eClear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eViscosity (+25°C)\u003c\/td\u003e\n\u003ctd\u003e80–150 mPa·s (medium)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGap fill\u003c\/td\u003e\n\u003ctd\u003e10–150 microns\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFixture time\u003c\/td\u003e\n\u003ctd\u003e1–180 seconds, substrate dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFull cure\u003c\/td\u003e\n\u003ctd\u003e24–72 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength\u003c\/td\u003e\n\u003ctd\u003e15–25 N\/mm² (ISO 6922)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eService temperature\u003c\/td\u003e\n\u003ctd\u003e-50°C to +120°C (peaks to +150°C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApprovals\u003c\/td\u003e\n\u003ctd\u003eNSF registered for food processing areas\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShelf life\u003c\/td\u003e\n\u003ctd\u003e12 months in original unopened packaging\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack size\u003c\/td\u003e\n\u003ctd\u003e50g bottle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eImportant notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBonds skin instantly\u003c\/strong\u003e – avoid contact with skin and eyes, and keep away from children.\u003c\/li\u003e\n\u003cli\u003eNot approved for use with pure or gaseous oxygen.\u003c\/li\u003e\n\u003cli\u003eStore in a cool, dry place below +20°C; refrigeration at +2°C\/+7°C extends shelf life. Do not refill containers with used product.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSafety\u003c\/h2\u003e\n\u003cp\u003eConsult the Safety Data Sheet (SDS) before use. Use in a well-ventilated area and wear suitable protection when handling.\u003c\/p\u003e\n\u003cp class=\"disclaimer\"\u003e\u003cem\u003eThis information is provided as a general guide only. Always test the adhesive on your specific materials and refer to the manufacturer's technical documentation before use.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Loxeal","offers":[{"title":"Default Title","offer_id":54240191906158,"sku":"GA-LOXIS43S-050","price":29.95,"currency_code":"AUD","in_stock":false}]},{"product_id":"loxeal-primer-7-polyolefin-primer-20ml","title":"Loxeal Primer 7 Polyolefin Primer 20ml","description":"\u003cdiv class=\"product-description\"\u003e\n\u003ch1\u003eLoxeal Primer 7 Polyolefin Primer 20ml\u003c\/h1\u003e\n\u003cp\u003eLoxeal Primer 7 is a \u003cstrong\u003esolvent-based surface primer\u003c\/strong\u003e that makes the “unglueable” plastics glueable. Applied before a cyanoacrylate super glue, it \u003cstrong\u003eraises the surface energy of polyethylene (PE), polypropylene (PP), thermoplastic rubbers, EPDM, PTFE and silicones\u003c\/strong\u003e, transforming bond strength on these notoriously low-energy materials. It dries in seconds, is \u003cstrong\u003efluorescent under blue light\u003c\/strong\u003e so coverage can be checked, and is recommended for use with Loxeal Istant 34 and other ethyl cyanoacrylate adhesives. Supplied in a 20ml bottle.\u003c\/p\u003e\n\u003ch2\u003eWhy choose Loxeal Primer 7?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnlocks polyolefins\u003c\/strong\u003e – makes PP, PE, PTFE, EPDM and silicone bondable with standard super glues\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast and simple\u003c\/strong\u003e – brush on a thin coat, wait a few seconds, then glue as normal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVerifiable coverage\u003c\/strong\u003e – fluoresces under a blue lamp for quality control\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLong working window\u003c\/strong\u003e – primed surfaces stay active for up to one hour\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUltra-thin, fluid consistency\u003c\/strong\u003e – roughly 1.5 mPa·s for even wetting of the surface\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTypical applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBonding polypropylene and polyethylene parts, containers and housings\u003c\/li\u003e\n\u003cli\u003ePTFE, silicone rubber and EPDM components that resist ordinary adhesives\u003c\/li\u003e\n\u003cli\u003eThermoplastic rubber grips, seals and trims\u003c\/li\u003e\n\u003cli\u003eProduction and repair work on low surface energy plastics\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to use\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eEnsure surfaces are clean and dry.\u003c\/li\u003e\n\u003cli\u003eBrush a thin coat of Primer 7 onto the surfaces to be bonded and let it dry for a few seconds.\u003c\/li\u003e\n\u003cli\u003eApply your cyanoacrylate adhesive and press the parts together – handling strength develops within seconds.\u003c\/li\u003e\n\u003cli\u003eBond within one hour of priming for best results; reapply primer if more than eight hours pass.\u003c\/li\u003e\n\u003cli\u003eReseal the bottle immediately after use.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eUsage notes\u003c\/h2\u003e\n\u003cp\u003ePrimer 7 is intended only for difficult, low surface energy materials – do not use it on substrates that bond readily without priming. Best adhesion is achieved when parts are joined within an hour of application.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eChemistry\u003c\/td\u003e\n\u003ctd\u003eAliphatic amine in organic solvent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAppearance\u003c\/td\u003e\n\u003ctd\u003eColourless; fluorescent under blue light\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eViscosity (+25°C)\u003c\/td\u003e\n\u003ctd\u003e1.5 mPa·s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpecific weight (+25°C)\u003c\/td\u003e\n\u003ctd\u003e0.7 g\/ml\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOn-part life\u003c\/td\u003e\n\u003ctd\u003eBond within 1 hour; reapply after 8 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShelf life\u003c\/td\u003e\n\u003ctd\u003e1 year in original unopened packaging at +25°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack size\u003c\/td\u003e\n\u003ctd\u003e20ml bottle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eImportant notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSolvent based – use in a well-ventilated area away from ignition sources.\u003c\/li\u003e\n\u003cli\u003eStore in a cool, dry place below +20°C and do not refill containers with used product.\u003c\/li\u003e\n\u003cli\u003eSeal the bottle immediately after each use to preserve the contents.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSafety\u003c\/h2\u003e\n\u003cp\u003eConsult the Safety Data Sheet (SDS) before use and wear suitable protection when handling.\u003c\/p\u003e\n\u003cp class=\"disclaimer\"\u003e\u003cem\u003eThis information is provided as a general guide only. Always test on your specific materials and refer to the manufacturer's technical documentation before use.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Loxeal","offers":[{"title":"Default Title","offer_id":54240192004462,"sku":"GA-LOXPR7-020","price":24.95,"currency_code":"AUD","in_stock":false}]},{"product_id":"loxeal-activator-9-cyanoacrylate-accelerator-spray-200ml","title":"Loxeal Activator 9 Cyanoacrylate Accelerator Spray 200ml","description":"\u003cdiv class=\"product-description\"\u003e\n\u003ch1\u003eLoxeal Activator 9 Cyanoacrylate Accelerator Spray 200ml\u003c\/h1\u003e\n\u003cp\u003eLoxeal Activator 9 is an \u003cstrong\u003eaccelerator spray for cyanoacrylate super glues\u003c\/strong\u003e that cleans and degreases parts while slashing setting times. Sprayed onto one surface before assembly, it triggers \u003cstrong\u003ecure in just 1–4 seconds\u003c\/strong\u003e – even on slow, dry or hard-to-activate substrates – and a treated surface \u003cstrong\u003estays active for up to 8 hours\u003c\/strong\u003e. It can also be misted over squeezed-out adhesive after assembly to fix the excess instantly. Supplied as a 200ml aerosol for fast, even coverage.\u003c\/p\u003e\n\u003ch2\u003eWhy choose Loxeal Activator 9?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCure in 1–4 seconds\u003c\/strong\u003e – turns slow joints into instant ones\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCleans as it works\u003c\/strong\u003e – degreases parts in the same step\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8-hour activation window\u003c\/strong\u003e – pre-treat parts ahead of assembly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFixes surplus glue\u003c\/strong\u003e – instantly sets excess adhesive outside the joint\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConvenient aerosol\u003c\/strong\u003e – quick, even application on parts of any shape\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTypical applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSpeeding up cyanoacrylate cure on wood, porous and acidic surfaces\u003c\/li\u003e\n\u003cli\u003eProduction assembly where consistent, rapid fixture times matter\u003c\/li\u003e\n\u003cli\u003eCold or low-humidity conditions where super glue sets slowly\u003c\/li\u003e\n\u003cli\u003eInstantly curing glue fillets and squeeze-out for a tidy finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to use\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eSpray a light coat of Activator 9 onto one of the surfaces to be bonded.\u003c\/li\u003e\n\u003cli\u003eAllow it to dry for 20–30 seconds.\u003c\/li\u003e\n\u003cli\u003eApply cyanoacrylate adhesive to the other surface and assemble the parts – cure takes effect in 1–4 seconds.\u003c\/li\u003e\n\u003cli\u003eTo set surplus adhesive after assembly, mist it lightly with Activator 9.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eUsage notes\u003c\/h2\u003e\n\u003cp\u003eExact curing effect depends on the adhesive type, gap between parts and surface composition. Treated surfaces remain active for around 8 hours, so parts can be prepared in advance. Note that heavy over-application of activator can reduce ultimate bond strength on some joints.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eChemistry\u003c\/td\u003e\n\u003ctd\u003eOrganic chemicals in solvent composition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAppearance\u003c\/td\u003e\n\u003ctd\u003eColourless\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eViscosity (+25°C)\u003c\/td\u003e\n\u003ctd\u003e1–2 mPa·s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrying time (+25°C)\u003c\/td\u003e\n\u003ctd\u003e20–30 seconds\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCure effect\u003c\/td\u003e\n\u003ctd\u003e1–4 seconds, adhesive and gap dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eActivation life on surface\u003c\/td\u003e\n\u003ctd\u003e8 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShelf life\u003c\/td\u003e\n\u003ctd\u003e12 months in original unopened packaging\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack size\u003c\/td\u003e\n\u003ctd\u003e200ml aerosol spray\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eImportant notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSolvent based aerosol – use in a well-ventilated area away from heat and ignition sources.\u003c\/li\u003e\n\u003cli\u003eStore in a cool, dry place below +20°C and do not refill containers with used product.\u003c\/li\u003e\n\u003cli\u003ePair with Loxeal Istant cyanoacrylate adhesives for best results.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSafety\u003c\/h2\u003e\n\u003cp\u003eConsult the Safety Data Sheet (SDS) before use. Pressurised container – protect from sunlight and do not expose to temperatures exceeding +50°C.\u003c\/p\u003e\n\u003cp class=\"disclaimer\"\u003e\u003cem\u003eThis information is provided as a general guide only. Always test on your specific materials and refer to the manufacturer's technical documentation before use.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Loxeal","offers":[{"title":"Default Title","offer_id":54240192102766,"sku":"GA-LOXAT9-200","price":32.95,"currency_code":"AUD","in_stock":false}]},{"product_id":"loxeal-31-42-clear-5-minute-epoxy-adhesive-50ml-dual-cartridge","title":"Loxeal 31-42 Clear 5-Minute Epoxy Adhesive 50ml Dual Cartridge","description":"\u003cdiv class=\"product-description\"\u003e\n\u003ch1\u003eLoxeal 31-42 Clear 5-Minute Epoxy Adhesive 50ml Dual Cartridge\u003c\/h1\u003e\n\u003cp\u003eLoxeal 31-42 is a \u003cstrong\u003etwo-part, fast-setting structural epoxy\u003c\/strong\u003e that cures \u003cstrong\u003ecolourless and transparent\u003c\/strong\u003e, making it ideal for repairs where the glue line needs to stay invisible. Supplied in a convenient \u003cstrong\u003e50ml dual cartridge (1:1 ratio)\u003c\/strong\u003e with a mixing nozzle, it dispenses perfectly proportioned adhesive with no weighing or hand mixing. With a working time of around 5 minutes and handling strength in 20–30 minutes, it bonds metals, ferrite, ceramic, marble, glass, concrete, wood and some rigid plastics.\u003c\/p\u003e\n\u003ch2\u003eWhy choose Loxeal 31-42?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDries clear\u003c\/strong\u003e – colourless, transparent bond line suits glass, ceramics and visible repairs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast 5-minute set\u003c\/strong\u003e – 3–8 minute working time, functional strength in 20–30 minutes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo-mess 1:1 dual cartridge\u003c\/strong\u003e with mixing nozzle for accurate, on-part dispensing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGap filling from 0.1 to 2.0 mm\u003c\/strong\u003e for less-than-perfect joints\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable bonds\u003c\/strong\u003e with excellent resistance to water, gasoline, motor oil and cooling gas\u003c\/li\u003e\n\u003cli\u003eEasy enough for DIY, strong enough for the workshop\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTypical applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eStructural bonding of metals, ferrite, ceramic, marble, glass, concrete and wood\u003c\/li\u003e\n\u003cli\u003eBonding some rigid plastics such as polyester, ABS and rigid PVC\u003c\/li\u003e\n\u003cli\u003eJoining dissimilar materials in one fast operation\u003c\/li\u003e\n\u003cli\u003eHousehold, automotive, hobby and workshop repairs needing a clear, rigid bond\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to use\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eLightly abrade the surfaces, then degrease with Loxeal Cleaner 10 or acetone and allow to dry.\u003c\/li\u003e\n\u003cli\u003eFit the mixing nozzle to the cartridge and discard the first 3–5 cm of extruded adhesive.\u003c\/li\u003e\n\u003cli\u003eApply the mixed adhesive directly to one surface.\u003c\/li\u003e\n\u003cli\u003eAssemble the parts immediately and hold them together, without mechanical stress, until handling strength is reached.\u003c\/li\u003e\n\u003cli\u003eRemove uncured excess with acetone or a compatible solvent-based cleaner; cured adhesive can only be removed mechanically.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eCure times\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePot life (working time): 3–8 minutes at +25°C\u003c\/li\u003e\n\u003cli\u003eFunctional cure: 20–30 minutes at +25°C\u003c\/li\u003e\n\u003cli\u003eStrength continues to develop over the following hours; gentle heat accelerates cure\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eChemistry\u003c\/th\u003e\n\u003ctd\u003eTwo-part epoxy (resin \/ amine hardener)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eColour (mixed)\u003c\/th\u003e\n\u003ctd\u003eColourless \/ transparent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMixing ratio\u003c\/th\u003e\n\u003ctd\u003e1:1 by volume\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePot life (+25°C)\u003c\/th\u003e\n\u003ctd\u003e3–8 minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFunctional cure\u003c\/th\u003e\n\u003ctd\u003e20–30 minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShear strength (steel, ISO 4587)\u003c\/th\u003e\n\u003ctd\u003e12–14 N\/mm²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePeel strength (ISO 4578)\u003c\/th\u003e\n\u003ctd\u003e4–20 N\/25mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHardness\u003c\/th\u003e\n\u003ctd\u003eShore D 65–75\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGap fill\u003c\/th\u003e\n\u003ctd\u003e0.1–2.0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eService temperature\u003c\/th\u003e\n\u003ctd\u003e-40°C to +80°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePack size\u003c\/th\u003e\n\u003ctd\u003e50ml dual cartridge (DCT) with mixing nozzle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShelf life\u003c\/th\u003e\n\u003ctd\u003e1 year unopened at +5°C to +25°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eImportant notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eNot suitable for rubber, soft materials, polyethylene (PE), polypropylene (PP) or PTFE\u003c\/li\u003e\n\u003cli\u003eApply at temperatures above +15°C; higher temperatures shorten pot life\u003c\/li\u003e\n\u003cli\u003eAvoid mixing large volumes at once – the chemical reaction generates heat\u003c\/li\u003e\n\u003cli\u003eStore in a cool, dry place at no more than +25°C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSafety\u003c\/h2\u003e\n\u003cp\u003eConsult the Safety Data Sheet (SDS) before use. Work in a well-ventilated area, avoid skin and eye contact, and keep out of reach of children.\u003c\/p\u003e\n\u003cp class=\"disclaimer\"\u003e\u003cem\u003eProduct information is provided as a general guide only. Always refer to the manufacturer's Technical Data Sheet and Safety Data Sheet, and test the product for suitability in your specific application before use.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Loxeal","offers":[{"title":"Default Title","offer_id":54240213860718,"sku":"GA-LOX3142-050","price":24.95,"currency_code":"AUD","in_stock":false}]},{"product_id":"loxeal-metalox-metal-repair-epoxy-kit-10-x-25ml-bi-syringes","title":"Loxeal Metalox Metal Repair Epoxy Kit 10 x 25ml Bi-Syringes","description":"\u003cdiv class=\"product-description\"\u003e\n\u003ch1\u003eLoxeal Metalox Metal Repair Epoxy Kit 10 x 25ml Bi-Syringes\u003c\/h1\u003e\n\u003cp\u003eLoxeal Metalox is a \u003cstrong\u003esolvent-free, fast-curing, metal-filled two-part epoxy\u003c\/strong\u003e engineered for repairing and bonding metal components. This \u003cstrong\u003etrade pack contains 10 x 25ml bi-syringes, each supplied with mixing nozzles\u003c\/strong\u003e, so every job starts with fresh, accurately proportioned adhesive. Its thixotropic (non-sag) paste works as an adhesive filler – rebuilding metal castings, pipework and flanges – and once cured it can be \u003cstrong\u003emachined, sanded and painted\u003c\/strong\u003e, typically within a few hours of application.\u003c\/p\u003e\n\u003ch2\u003eWhy choose Loxeal Metalox?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrade pack of 10 x 25ml bi-syringes with mixers\u003c\/strong\u003e – fresh 1:1 dispensing on every repair\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast cure\u003c\/strong\u003e – handling strength in around 15 minutes, sandable in about 5 hours at room temperature\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrong on steel\u003c\/strong\u003e – lap shear strength of 21 N\/mm² on grit-blasted mild steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMachinable, sandable and paintable\u003c\/strong\u003e after polymerisation, even for outdoor repairs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNon-sag thixotropic paste\u003c\/strong\u003e stays put on vertical and overhead surfaces\u003c\/li\u003e\n\u003cli\u003eExcellent resistance to water and many chemical agents\u003c\/li\u003e\n\u003cli\u003eHeat cure option: 1 hour at +60°C speeds cure and boosts final strength\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTypical applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRepairing metal castings, pipework and flanges\u003c\/li\u003e\n\u003cli\u003eAutomotive body repair and panel filling\u003c\/li\u003e\n\u003cli\u003eBonding metal substrates, plus concrete, wood and other rigid materials\u003c\/li\u003e\n\u003cli\u003eMaintenance and plant repairs where downtime must be kept short\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to use\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eScratch or abrade the surface, then degrease with Loxeal Cleaner 10 or acetone and allow to dry.\u003c\/li\u003e\n\u003cli\u003eFit the mixing nozzle to the bi-syringe and discard the first 3–5 cm of extruded product.\u003c\/li\u003e\n\u003cli\u003eApply the mixed adhesive directly to the repair area; work at temperatures above +15°C.\u003c\/li\u003e\n\u003cli\u003eAssemble or shape immediately and leave undisturbed until cured.\u003c\/li\u003e\n\u003cli\u003eOnce cured (sandable after about 5 hours at +25°C), machine, sand or paint as required.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eCure times\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePot life: approximately 5 minutes at +25°C\u003c\/li\u003e\n\u003cli\u003eHandling strength: approximately 15 minutes\u003c\/li\u003e\n\u003cli\u003eSandable: about 5 hours at +25°C (90% of final hardness)\u003c\/li\u003e\n\u003cli\u003eAccelerated cure: 1 hour at +60°C for full resistance sooner\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eChemistry\u003c\/th\u003e\n\u003ctd\u003eTwo-part epoxy (resin \/ amine hardener), metal-filled\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eColour\u003c\/th\u003e\n\u003ctd\u003ePart A metallic grey \/ Part B black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMixing ratio\u003c\/th\u003e\n\u003ctd\u003e1:1 by volume\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePot life (+25°C)\u003c\/th\u003e\n\u003ctd\u003eApprox. 5 minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHandling strength\u003c\/th\u003e\n\u003ctd\u003eApprox. 15 minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLap shear strength (ISO 4587)\u003c\/th\u003e\n\u003ctd\u003e21 N\/mm² (grit-blasted mild steel); 18 N\/mm² (stainless steel)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompression strength (ASTM D695)\u003c\/th\u003e\n\u003ctd\u003e60 N\/mm²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHardness (ISO 868)\u003c\/th\u003e\n\u003ctd\u003eShore D 65\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePack size\u003c\/th\u003e\n\u003ctd\u003eTrade pack: 10 x 25ml bi-syringes with mixing nozzles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShelf life\u003c\/th\u003e\n\u003ctd\u003e24 months unopened at +5°C to +25°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eImportant notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eApply at temperatures above +15°C; higher temperatures and large mixed quantities reduce pot life\u003c\/li\u003e\n\u003cli\u003eAvoid mixing excess product – the curing reaction generates heat\u003c\/li\u003e\n\u003cli\u003eCured adhesive can only be removed mechanically\u003c\/li\u003e\n\u003cli\u003eStore in a cool, dry place at no more than +25°C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSafety\u003c\/h2\u003e\n\u003cp\u003eConsult the Safety Data Sheet (SDS) before use. Wear suitable gloves, avoid skin and eye contact, and work in a well-ventilated area.\u003c\/p\u003e\n\u003cp class=\"disclaimer\"\u003e\u003cem\u003eProduct information is provided as a general guide only. Always refer to the manufacturer's Technical Data Sheet and Safety Data Sheet, and test the product for suitability in your specific application before use.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Loxeal","offers":[{"title":"Default Title","offer_id":54240213959022,"sku":"GA-LOXMETALOX-KIT","price":289.0,"currency_code":"AUD","in_stock":false}]},{"product_id":"loxeal-34-59t-structural-acrylic-adhesive-transparent-gel-150ml","title":"Loxeal 34-59T Structural Acrylic Adhesive Transparent Gel 150ml","description":"\u003cdiv class=\"product-description\"\u003e\n\u003ch1\u003eLoxeal 34-59T Structural Acrylic Adhesive Transparent Gel 150ml\u003c\/h1\u003e\n\u003cp\u003eLoxeal 34-59T is the \u003cstrong\u003etransparent gel\u003c\/strong\u003e version of Loxeal's 34-59 series – a \u003cstrong\u003efast-curing, chemically activated structural acrylic adhesive\u003c\/strong\u003e used together with a Loxeal Activator (such as Activator 20). No mixing is required: apply the adhesive to one surface and the activator to the other, press the parts together and the joint fixtures in as little as \u003cstrong\u003e20–40 seconds\u003c\/strong\u003e. The toughened, thixotropic gel is non-sag on vertical surfaces, bonds ferrites, metals and ceramics, and delivers a wide service temperature range up to \u003cstrong\u003e+165°C\u003c\/strong\u003e. Supplied in a 150ml pack.\u003c\/p\u003e\n\u003ch2\u003eWhy choose Loxeal 34-59T?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTransparent gel formulation\u003c\/strong\u003e for tidy, discreet bond lines\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo mixing required\u003c\/strong\u003e – cures on contact with the matching Loxeal Activator\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVery fast fixturing\u003c\/strong\u003e – typical handling time 20–40 seconds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh strength\u003c\/strong\u003e – shear strength 20–30 N\/mm² with strong impact resistance\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh temperature capability\u003c\/strong\u003e – service range -65°C to +165°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNon-sag gel\u003c\/strong\u003e suits vertical and overhead application\u003c\/li\u003e\n\u003cli\u003eAcid-free chemistry, ideal for high-speed assembly lines\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTypical applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eStructural bonding of ferrites, metals and ceramics (e.g. magnet bonding in motors and speakers)\u003c\/li\u003e\n\u003cli\u003eHigh-speed production and assembly line joining\u003c\/li\u003e\n\u003cli\u003eBonded joints exposed to elevated temperatures, impact and vibration\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to use\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eClean both surfaces with Loxeal Cleaner 10 and allow to dry – water and grease prevent adhesion.\u003c\/li\u003e\n\u003cli\u003eApply the Loxeal Activator to one surface and the adhesive gel to the other.\u003c\/li\u003e\n\u003cli\u003eAssemble and press the parts together until handling strength is achieved (20–40 seconds).\u003c\/li\u003e\n\u003cli\u003eFor gaps larger than 0.5 mm, apply activator to both surfaces before applying the adhesive to one side.\u003c\/li\u003e\n\u003cli\u003eRemove excess uncured adhesive with an organic solvent and allow at least 24 hours for full cure before loading the joint.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eCure times\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHandling time (with Activator 20): 20–40 seconds\u003c\/li\u003e\n\u003cli\u003eFunctional cure: 10–20 minutes\u003c\/li\u003e\n\u003cli\u003eFull cure: 24 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eChemistry\u003c\/th\u003e\n\u003ctd\u003eUrethane methacrylate structural acrylic (chemically activated, no-mix)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eForm\u003c\/th\u003e\n\u003ctd\u003eTransparent thixotropic gel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eViscosity (+25°C)\u003c\/th\u003e\n\u003ctd\u003e15,000–25,000 mPa·s (thixotropic)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGap filling\u003c\/th\u003e\n\u003ctd\u003e0.05–0.20 mm (activator on both faces for larger gaps)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShear strength (ISO 4587)\u003c\/th\u003e\n\u003ctd\u003e20–30 N\/mm²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTensile strength (ISO 6922)\u003c\/th\u003e\n\u003ctd\u003e20–25 N\/mm²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eImpact strength (ASTM D950)\u003c\/th\u003e\n\u003ctd\u003e15–25 kJ\/m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eService temperature\u003c\/th\u003e\n\u003ctd\u003e-65°C to +165°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePack size\u003c\/th\u003e\n\u003ctd\u003e150ml\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShelf life\u003c\/th\u003e\n\u003ctd\u003e1 year unopened at +25°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eImportant notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRequires a Loxeal Activator (e.g. Activator 20), applied to the opposing surface – sold separately\u003c\/li\u003e\n\u003cli\u003eNot designed for polyolefins (PP\/PE), PTFE or soft, flexible materials\u003c\/li\u003e\n\u003cli\u003eStore in a cool, dry place away from direct light, at no more than +25°C\u003c\/li\u003e\n\u003cli\u003eSpecifications shown are for the Loxeal 34-59 series adhesive\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSafety\u003c\/h2\u003e\n\u003cp\u003eConsult the Safety Data Sheet (SDS) before use. Avoid skin and eye contact and ensure good ventilation during application.\u003c\/p\u003e\n\u003cp class=\"disclaimer\"\u003e\u003cem\u003eProduct information is provided as a general guide only. Always refer to the manufacturer's Technical Data Sheet and Safety Data Sheet, and test the product for suitability in your specific application before use.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Loxeal","offers":[{"title":"Default Title","offer_id":54240214057326,"sku":"GA-LOX3459T-150","price":119.0,"currency_code":"AUD","in_stock":false}]},{"product_id":"loxeal-superlox-polyolefin-bonder-kit-10-x-25ml-bi-syringes","title":"Loxeal Superlox Polyolefin Bonder Kit 10 x 25ml Bi-Syringes","description":"\u003cdiv class=\"product-description\"\u003e\n\u003ch1\u003eLoxeal Superlox Polyolefin Bonder Kit 10 x 25ml Bi-Syringes\u003c\/h1\u003e\n\u003cp\u003eLoxeal Superlox is a \u003cstrong\u003etwo-part acrylic adhesive developed to bond polyolefins\u003c\/strong\u003e – polypropylene (PP), polyethylene (PE), HDPE and LDPE – and other notoriously difficult low-surface-energy plastics, \u003cstrong\u003ewithout primers, flame treatment or other expensive surface pre-treatments\u003c\/strong\u003e. This \u003cstrong\u003etrade pack contains 10 x 25ml bi-syringes, each with mixing nozzles\u003c\/strong\u003e, dispensing the two components at a simple 1:1 ratio. It joins polyolefins to each other and to other plastics such as ABS and PVC, and to metals, producing structural joints with high shear and peel strength.\u003c\/p\u003e\n\u003ch2\u003eWhy choose Loxeal Superlox?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBonds the \"unbondable\"\u003c\/strong\u003e – PP, PE, HDPE and LDPE plus other low-surface-energy plastics\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo primer or surface pre-treatment required\u003c\/strong\u003e – clean, apply, assemble\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrade pack of 10 x 25ml bi-syringes with mixers\u003c\/strong\u003e – fresh adhesive for every job\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSimple 1:1 mixing ratio\u003c\/strong\u003e through the supplied static mixing nozzles\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStructural performance\u003c\/strong\u003e – high shear and peel strength on plastics and mixed-material joints\u003c\/li\u003e\n\u003cli\u003eAlso bonds polyolefins to other plastics (ABS, PVC) and to metals\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTypical applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRepairing and fabricating PP and PE components: tanks, housings, containers, piping and trim\u003c\/li\u003e\n\u003cli\u003eJoining polyolefin parts to dissimilar plastics or metal brackets and fittings\u003c\/li\u003e\n\u003cli\u003eManufacturing and maintenance work on low-surface-energy plastic assemblies\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to use\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eClean the surfaces to remove dust, oil and grease (for example with Loxeal Cleaner 10) and allow to dry.\u003c\/li\u003e\n\u003cli\u003eFit the static mixing nozzle to the bi-syringe and discard the first few centimetres of extruded adhesive.\u003c\/li\u003e\n\u003cli\u003eApply the mixed adhesive to one surface.\u003c\/li\u003e\n\u003cli\u003eAssemble the parts promptly and hold or clamp them without movement while the adhesive sets.\u003c\/li\u003e\n\u003cli\u003eLeave the joint undisturbed until fully cured before applying load.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eCure times\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFast curing at room temperature – parts typically fixture within minutes of assembly\u003c\/li\u003e\n\u003cli\u003eAllow 24 hours for full strength before placing joints under working load\u003c\/li\u003e\n\u003cli\u003eRefer to the Technical Data Sheet for precise fixture and cure data for your conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eChemistry\u003c\/th\u003e\n\u003ctd\u003eTwo-part structural acrylic, polyolefin bonder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMixing ratio\u003c\/th\u003e\n\u003ctd\u003e1:1 by volume via static mixing nozzle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eKey substrates\u003c\/th\u003e\n\u003ctd\u003ePP, PE, HDPE, LDPE and other low-surface-energy plastics; also ABS, PVC and metals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSurface preparation\u003c\/th\u003e\n\u003ctd\u003eNo primer or pre-treatment required – clean and dry surfaces only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength profile\u003c\/th\u003e\n\u003ctd\u003eHigh shear and peel strength\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePack size\u003c\/th\u003e\n\u003ctd\u003eTrade pack: 10 x 25ml bi-syringes with mixing nozzles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eImportant notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eWork at room temperature; low temperatures slow the cure\u003c\/li\u003e\n\u003cli\u003eUse each mixing nozzle for one continuous application – fit a fresh nozzle if work is interrupted\u003c\/li\u003e\n\u003cli\u003eCured adhesive can only be removed mechanically\u003c\/li\u003e\n\u003cli\u003eStore in a cool, dry place at no more than +25°C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSafety\u003c\/h2\u003e\n\u003cp\u003eConsult the Safety Data Sheet (SDS) before use. Use in a well-ventilated area and avoid skin and eye contact.\u003c\/p\u003e\n\u003cp class=\"disclaimer\"\u003e\u003cem\u003eProduct information is provided as a general guide only. Always refer to the manufacturer's Technical Data Sheet and Safety Data Sheet, and test the product for suitability in your specific application before use.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Loxeal","offers":[{"title":"Default Title","offer_id":54240214647150,"sku":"GA-LOXSUPERLOX-KIT","price":369.0,"currency_code":"AUD","in_stock":false}]},{"product_id":"loxeal-activator-11-anaerobic-accelerator-spray-200ml","title":"Loxeal Activator 11 Anaerobic Accelerator Spray 200ml","description":"\u003cdiv class=\"product-description\"\u003e\n\u003ch1\u003eLoxeal Activator 11 Anaerobic Accelerator Spray 200ml\u003c\/h1\u003e\n\u003cp\u003eLoxeal Activator 11 \u003cstrong\u003ecleans, degreases and dramatically accelerates the cure of anaerobic adhesives and sealants\u003c\/strong\u003e – threadlockers, threadsealants, retaining compounds and gasketing products. It is the answer when anaerobic products cure slowly or unreliably: on \u003cstrong\u003epassive surfaces\u003c\/strong\u003e (such as stainless steel, plated finishes and many alloys), at \u003cstrong\u003elow temperatures\u003c\/strong\u003e, or across larger gaps. Spray one surface, let the solvent flash off for a few seconds, and fixture is typically achieved in \u003cstrong\u003e20–120 seconds\u003c\/strong\u003e. Supplied as a 200ml aerosol for fast, even coverage.\u003c\/p\u003e\n\u003ch2\u003eWhy choose Loxeal Activator 11?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeeds anaerobic fixture time to 20–120 seconds\u003c\/strong\u003e depending on adhesive, gap and temperature\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCleans and degreases\u003c\/strong\u003e the joint in the same step\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReliable curing in tough conditions\u003c\/strong\u003e – passive metals, cold workshops, larger gaps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLong-lasting activation\u003c\/strong\u003e – treated parts remain active for up to three months when protected from dust and weathering\u003c\/li\u003e\n\u003cli\u003eSuitable for both threaded and flange joints\u003c\/li\u003e\n\u003cli\u003eConvenient 200ml aerosol spray application\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTypical applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePre-treating stainless steel, zinc-plated and other passive fasteners before threadlocking or threadsealing\u003c\/li\u003e\n\u003cli\u003eAccelerating retaining compounds on bearings, bushes and cylindrical assemblies\u003c\/li\u003e\n\u003cli\u003eSpeeding gasket and flange sealant cure in cold conditions or production settings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to use\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eSpray Activator 11 onto one of the surfaces to be joined.\u003c\/li\u003e\n\u003cli\u003eAllow the solvent to evaporate for a few seconds until the surface is dry.\u003c\/li\u003e\n\u003cli\u003eApply the anaerobic adhesive or sealant to the other surface.\u003c\/li\u003e\n\u003cli\u003eAssemble the parts; fixture typically occurs within 20–120 seconds.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eComposition\u003c\/th\u003e\n\u003ctd\u003eOrganic activating agents in solvent carrier\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAppearance\u003c\/th\u003e\n\u003ctd\u003eGreen liquid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eViscosity (+25°C)\u003c\/th\u003e\n\u003ctd\u003e1–2 mPa·s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecific weight (+25°C)\u003c\/th\u003e\n\u003ctd\u003e0.8 g\/ml\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFlash point (COC\/DIN\/ISO 2592)\u003c\/th\u003e\n\u003ctd\u003e+21°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCure acceleration\u003c\/th\u003e\n\u003ctd\u003eFixture in 20–120 seconds (adhesive, gap and temperature dependent)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOn-part activation life\u003c\/th\u003e\n\u003ctd\u003e24 hours; up to 3 months if parts are protected from dust and atmospheric agents\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBreakaway torque (ISO 10964, ref. 83-54)\u003c\/th\u003e\n\u003ctd\u003e\u0026gt;5 Nm after 5 minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePack size\u003c\/th\u003e\n\u003ctd\u003e200ml aerosol spray\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShelf life\u003c\/th\u003e\n\u003ctd\u003e1 year unopened at +25°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eImportant notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eUse of an activator may reduce the final mechanical strength of the anaerobic bond\u003c\/li\u003e\n\u003cli\u003eWait for the solvent to fully evaporate before assembling parts\u003c\/li\u003e\n\u003cli\u003eFlammable – keep away from ignition sources and use with good ventilation\u003c\/li\u003e\n\u003cli\u003eStore in a cool, dry place at no more than +25°C; do not refill containers with used product\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSafety\u003c\/h2\u003e\n\u003cp\u003eConsult the Safety Data Sheet (SDS) before use. Flammable aerosol: keep away from heat, sparks and open flames, use in a well-ventilated area and avoid inhaling vapours.\u003c\/p\u003e\n\u003cp class=\"disclaimer\"\u003e\u003cem\u003eProduct information is provided as a general guide only. Always refer to the manufacturer's Technical Data Sheet and Safety Data Sheet, and test the product for suitability in your specific application before use.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Loxeal","offers":[{"title":"Default Title","offer_id":54240214745454,"sku":"GA-LOXAT11-200","price":34.95,"currency_code":"AUD","in_stock":false}]},{"product_id":"loxeal-cleaner-10-degreaser-1l-tin","title":"Loxeal Cleaner 10 Degreaser 1L Tin","description":"\u003cdiv class=\"product-description\"\u003e\n\u003ch1\u003eLoxeal Cleaner 10 Degreaser 1L Tin\u003c\/h1\u003e\n\u003cp\u003eLoxeal Cleaner 10 is a \u003cstrong\u003enon-CFC, solvent-based cleaner and degreaser\u003c\/strong\u003e formulated for preparing surfaces before bonding or sealing with adhesives and sealants. Great adhesion starts with a clean joint: Cleaner 10 lifts oil, grease and contamination, \u003cstrong\u003eevaporates completely in around 60 seconds\u003c\/strong\u003e and is \u003cstrong\u003enon-corrosive\u003c\/strong\u003e, leaving surfaces perfectly ready for adhesive. Importantly, it has \u003cstrong\u003eno effect on the cure speed or final strength\u003c\/strong\u003e of Loxeal adhesives and sealants. This 1 litre tin is the economical choice for busy workshops and production benches.\u003c\/p\u003e\n\u003ch2\u003eWhy choose Loxeal Cleaner 10?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePurpose-made for surface prep\u003c\/strong\u003e before threadlockers, retainers, epoxies, acrylics and instant adhesives\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast flash-off\u003c\/strong\u003e – dries in about 60 seconds at room temperature\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNon-corrosive and residue-free\u003c\/strong\u003e on metals\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes not interfere\u003c\/strong\u003e with adhesive cure speed or bond strength\u003c\/li\u003e\n\u003cli\u003eEconomical \u003cstrong\u003e1 litre tin\u003c\/strong\u003e for decanting or wipe application\u003c\/li\u003e\n\u003cli\u003eNon-CFC solvent formulation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTypical applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDegreasing machined, treated or coated surfaces before bonding or sealing\u003c\/li\u003e\n\u003cli\u003eCleaning oil- and grease-contaminated parts in maintenance and assembly work\u003c\/li\u003e\n\u003cli\u003ePreparing plastic substrates prior to adhesive application (check compatibility first)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to use\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eApply Cleaner 10 generously to the surfaces to be bonded.\u003c\/li\u003e\n\u003cli\u003eWhile the surface is still wet, wipe with a clean cloth to lift heavy contamination.\u003c\/li\u003e\n\u003cli\u003eAllow the solvent to evaporate until the surface is completely dry (about 60 seconds).\u003c\/li\u003e\n\u003cli\u003eApply the adhesive or sealant immediately after drying and assemble the joint.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eFormulation\u003c\/th\u003e\n\u003ctd\u003eNon-CFC solvent blend\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAppearance\u003c\/th\u003e\n\u003ctd\u003eColourless liquid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBoiling range\u003c\/th\u003e\n\u003ctd\u003e+92°C to +102°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFlash point (COC\/DIN\/ISO 2592)\u003c\/th\u003e\n\u003ctd\u003e-1°C (highly flammable)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDensity (+25°C, DIN 51757)\u003c\/th\u003e\n\u003ctd\u003e0.70 g\/ml\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrying time (+25°C)\u003c\/th\u003e\n\u003ctd\u003eApprox. 60 seconds\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWater solubility\u003c\/th\u003e\n\u003ctd\u003eNot soluble\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCorrosivity\u003c\/th\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePack size\u003c\/th\u003e\n\u003ctd\u003e1 litre tin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShelf life\u003c\/th\u003e\n\u003ctd\u003e12 months at +5°C to +25°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eImportant notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThe solvent can affect certain plastics and coatings – check compatibility on a hidden area first\u003c\/li\u003e\n\u003cli\u003eUnclean or partially cleaned surfaces can significantly reduce adhesive performance\u003c\/li\u003e\n\u003cli\u003eDo not return used product to the original container\u003c\/li\u003e\n\u003cli\u003eStore between +5°C and +25°C in a cool, dry place\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSafety\u003c\/h2\u003e\n\u003cp\u003eConsult the Safety Data Sheet (SDS) before use. Highly flammable: keep away from naked flames and non-flameproof electrical equipment, use only in well-ventilated areas, avoid prolonged or repeated skin contact and do not smoke near the product.\u003c\/p\u003e\n\u003cp class=\"disclaimer\"\u003e\u003cem\u003eProduct information is provided as a general guide only. Always refer to the manufacturer's Technical Data Sheet and Safety Data Sheet, and test the product for suitability in your specific application before use.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Loxeal","offers":[{"title":"Default Title","offer_id":54240214843758,"sku":"GA-LOXCL10-1L","price":69.95,"currency_code":"AUD","in_stock":false}]},{"product_id":"loxeal-cleaner-10-degreaser-spray-400ml","title":"Loxeal Cleaner 10 Degreaser Spray 400ml","description":"\u003cdiv class=\"product-description\"\u003e\n\u003ch1\u003eLoxeal Cleaner 10 Degreaser Spray 400ml\u003c\/h1\u003e\n\u003cp\u003eLoxeal Cleaner 10 is a \u003cstrong\u003enon-CFC, solvent-based cleaner and degreaser\u003c\/strong\u003e for preparing surfaces before bonding or sealing with adhesives and sealants. This \u003cstrong\u003e400ml aerosol\u003c\/strong\u003e puts fast, controlled surface prep straight in your hand: spray, wipe, and the solvent \u003cstrong\u003eflashes off in around 60 seconds\u003c\/strong\u003e leaving a clean, dry, \u003cstrong\u003enon-corroded\u003c\/strong\u003e surface ready for adhesive. Cleaner 10 has \u003cstrong\u003eno effect on the cure speed or final strength\u003c\/strong\u003e of Loxeal adhesives and sealants – but a dirty joint certainly will.\u003c\/p\u003e\n\u003ch2\u003eWhy choose Loxeal Cleaner 10 spray?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConvenient aerosol application\u003c\/strong\u003e – even coverage on parts, threads and hard-to-reach areas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast flash-off\u003c\/strong\u003e – dries in about 60 seconds at room temperature\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNon-corrosive and residue-free\u003c\/strong\u003e on metals\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes not interfere\u003c\/strong\u003e with adhesive cure speed or bond strength\u003c\/li\u003e\n\u003cli\u003eIdeal partner for threadlockers, retainers, epoxies, structural acrylics and instant adhesives\u003c\/li\u003e\n\u003cli\u003eNon-CFC solvent formulation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTypical applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSpray-degreasing fasteners, threads and machined parts before threadlocking or retaining\u003c\/li\u003e\n\u003cli\u003eCleaning oil- and grease-contaminated surfaces in maintenance and assembly work\u003c\/li\u003e\n\u003cli\u003ePreparing treated, coated or plastic substrates prior to bonding (check compatibility first)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to use\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eSpray Cleaner 10 directly onto the surfaces to be bonded.\u003c\/li\u003e\n\u003cli\u003eWhile still wet, wipe with a clean cloth to remove heavy contamination.\u003c\/li\u003e\n\u003cli\u003eAllow the solvent to evaporate until the surface is completely dry (about 60 seconds).\u003c\/li\u003e\n\u003cli\u003eApply the adhesive or sealant immediately after drying and assemble the joint.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eFormulation\u003c\/th\u003e\n\u003ctd\u003eNon-CFC solvent blend\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAppearance\u003c\/th\u003e\n\u003ctd\u003eColourless liquid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBoiling range\u003c\/th\u003e\n\u003ctd\u003e+92°C to +102°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFlash point (COC\/DIN\/ISO 2592)\u003c\/th\u003e\n\u003ctd\u003e-1°C (highly flammable)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDensity (+25°C, DIN 51757)\u003c\/th\u003e\n\u003ctd\u003e0.70 g\/ml\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrying time (+25°C)\u003c\/th\u003e\n\u003ctd\u003eApprox. 60 seconds\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWater solubility\u003c\/th\u003e\n\u003ctd\u003eNot soluble\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCorrosivity\u003c\/th\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePack size\u003c\/th\u003e\n\u003ctd\u003e400ml aerosol spray\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShelf life\u003c\/th\u003e\n\u003ctd\u003e12 months at +5°C to +25°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eImportant notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThe solvent can affect certain plastics and coatings – check compatibility on a hidden area first\u003c\/li\u003e\n\u003cli\u003eUnclean or partially cleaned surfaces can significantly reduce adhesive performance\u003c\/li\u003e\n\u003cli\u003ePressurised container – protect from sunlight and do not expose to temperatures above +50°C\u003c\/li\u003e\n\u003cli\u003eStore between +5°C and +25°C in a cool, dry place\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSafety\u003c\/h2\u003e\n\u003cp\u003eConsult the Safety Data Sheet (SDS) before use. Highly flammable aerosol: keep away from naked flames, sparks and non-flameproof electrical equipment, use only in well-ventilated areas, avoid prolonged skin contact and do not smoke near the product.\u003c\/p\u003e\n\u003cp class=\"disclaimer\"\u003e\u003cem\u003eProduct information is provided as a general guide only. Always refer to the manufacturer's Technical Data Sheet and Safety Data Sheet, and test the product for suitability in your specific application before use.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Loxeal","offers":[{"title":"Default Title","offer_id":54240215499118,"sku":"GA-LOXCL10-400","price":39.95,"currency_code":"AUD","in_stock":false}]}],"url":"https:\/\/gluesaustralia.com.au\/collections\/loxeal.oembed","provider":"Glues Australia","version":"1.0","type":"link"}