{"title":"Smooth Finish","description":"\u003cp\u003eProducts that level to a clean, smooth surface with minimal tooling, ideal for visible seams and cosmetic repairs. Use filters to refine by chemistry, viscosity and cure profile. Always review the product page and TDS\/SDS.\u003c\/p\u003e","products":[{"product_id":"loctite-super-glue-glass-3g","title":"Loctite Super Glue Glass 3g","description":"\u003cp\u003e\u003cstrong\u003eInstant, crystal clear bonds that are water and dishwasher-resistant. Formulated to work on all types of glass.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended on:\u003c\/strong\u003e\u003cbr\u003eGlass, Crystal, Tinted Glass, Glass Works, Opaque Glass, Blown Glass.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProperties:\u003c\/strong\u003e\u003cbr\u003eBonds glass to glass\u003cbr\u003eGlass to metal\u003cbr\u003eStained glass\u003cbr\u003eCrystal and tinted glass\u003cbr\u003eWater and dishwasher resistant\u003cbr\u003eBonds in seconds\u003cbr\u003eDries transparent for invisible bonds\u003cbr\u003eEasy to open, self-piercing and anti-clog cap\u003cbr\u003eSolvent-free\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStep by Step:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eEnsure surfaces to be joined are clean, completely dry and close fitting\u003c\/li\u003e\n\u003cli\u003eTwist cap clockwise until it locks, then unscrew in an anti-clockwise direction to open\u003c\/li\u003e\n\u003cli\u003eCarefully squeeze a small drop onto one surface. Press the surfaces together and hold until set\u003c\/li\u003e\n\u003cli\u003eReplace the cap immediately and store upright in a cool dry place.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eHow to Repair a Glass Water Jug?\u003c\/strong\u003e\u003cbr\u003eLoctite Super Glue Glass has been specially formulated to repair glassware, delivering a sparkling performance every time. Once dry it forms crystal clear bonds on all types of glass breakages and cracks, delivering water and dishwasher resistant seals that are not only neat and free from unsightly white glue marks but also strong enough to resist pressure from temperature changes and water. Loctite Super Glue Glass is designed to work on all kinds of glass: glass, crystal, tinted glass, glass works, opaque glass and blown glass, and has a high strength formula that ensures you get long-lasting durability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFollow the step by step application guide:\u003c\/strong\u003e\u003cbr\u003e1.Wash the broken area with water (avoid using detergent as this can affect the glue's performance) and dry thoroughly. Ensure that the surfaces to be joined are close fitting.\u003cbr\u003e2.Carefully squeeze a small drop onto one of the broken parts. Press both surfaces together firmly and wait until they is set.\u003cbr\u003e3.Do not move until the surfaces are set.  Don’t worry if there is some excess glue, this can be easily removed once dry (see point 5)\u003cbr\u003e4.Allow at least 1-2 hours to fully cure before using. For best results leave overnight.\u003cbr\u003e5.Once dry, if there is any excess residue, gently wipe with a tissue dipped in Loctite Glue Remover or nail varnish remover containing acetone.\u003cbr\u003e6.Replace the cap immediately and store the glue upright in a cool dry place.\u003c\/p\u003e","brand":"Loctite","offers":[{"title":"Default Title","offer_id":52316526870894,"sku":"GA4057278012699","price":8.78,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/files\/4057278012699_da78ff48-c811-43be-a9a2-7edabfc9df64.jpg?v=1760525204"},{"product_id":"3m-bondo-professional-glazing-spot-putty","title":"3M Bondo Professional Glazing \u0026 Spot Putty","description":"\u003cdiv\u003eQuickly bonds to primer, metal, fiberglass and aluminum\u003c\/div\u003e\n\n\u003cdiv\u003eTwo-part component formula delivers excellent durability and less shrinkage\u003c\/div\u003e\n\n\u003cdiv\u003eQuickly repairs paint scratches, minor dents and stone chips\u003c\/div\u003e\n\n\u003cdiv\u003eGood spreading properties allow for ease of use\u003c\/div\u003e\n\n\u003cdiv\u003e \u003c\/div\u003e\n\n\u003cdiv\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/div\u003e\n\n\u003cdiv\u003eApplication\u003cspan style=\"white-space:pre\"\u003e \u003c\/span\u003eDent Fill\u003c\/div\u003e\n\n\u003cdiv\u003eBrand\u003cspan style=\"white-space:pre\"\u003e \u003c\/span\u003eBondo®\u003c\/div\u003e\n\n\u003cdiv\u003eColor\u003cspan style=\"white-space:pre\"\u003e \u003c\/span\u003eWhite, Off white\u003c\/div\u003e\n\n\u003cdiv\u003eProduct Type\u003cspan style=\"white-space:pre\"\u003e \u003c\/span\u003eGlaze Putty\u003c\/div\u003e\n\n\u003cdiv\u003eSubstrate\u003cspan style=\"white-space:pre\"\u003e \u003c\/span\u003eAluminum, eCoat or Paint, Galvanized, SMC\u003c\/div\u003e\n\n\u003cdiv\u003e \u003c\/div\u003e\n\n\u003cdiv\u003eDetails\u003c\/div\u003e\n\n\u003cdiv\u003eQuickly bonds to primer, metal, fiberglass and aluminum\u003c\/div\u003e\n\n\u003cdiv\u003eTwo-part component formula delivers excellent durability and less shrinkage\u003c\/div\u003e\n\n\u003cdiv\u003eQuickly repairs paint scratches, minor dents and stone chips\u003c\/div\u003e\n\n\u003cdiv\u003eGood spreading properties allow for ease of use\u003c\/div\u003e\n\n\u003cdiv\u003eFast curing makes putty sandable in only 20 minutes\u003c\/div\u003e\n\n\u003cdiv\u003ePutty is compatible with all types of automotive paint systems\u003c\/div\u003e\n\n\u003cdiv\u003eUse during the Fill stage of the 3M™ Body Repair System\u003c\/div\u003e\n\n\u003cdiv\u003eBondo® Professional Glazing \u0026amp; Spot Putty smooths and repairs pin holes, scratches, nicks, minor dents, stone chips and other surface imperfections in automotive paint and bodies. This product is a 2-part component formula that securely and quickly bonds to primer, metal, fiberglass and aluminum.\u003c\/div\u003e\n\n\u003cdiv\u003e \u003c\/div\u003e\n\n\u003cdiv\u003e\u003cstrong\u003eProfessional Quality Surface Blemish Repairs \u003c\/strong\u003e\u003c\/div\u003e\n\n\u003cdiv\u003eBondo® Professional Glazing \u0026amp; Spot Putty quickly repairs paint scratches, minor dents and stone chips. Our professional quality formula comes as a two-part product with putty and cream hardener to produce a mixture that won't shrink once cured. This glazing and spot putty has a 5-minute working time and a 20-minute curing time, giving you the perfect balance of enough time to complete the repair with a fast cure that keeps your project moving forward on schedule. \u003c\/div\u003e\n\n\u003cdiv\u003e \u003c\/div\u003e\n\n\u003cdiv\u003e\u003cstrong\u003ePerfect Repairs Every Time \u003c\/strong\u003e\u003c\/div\u003e\n\n\u003cdiv\u003eOnce cured, you're ready to sand to create a smooth patch that matches the surrounding surface beautifully. Our repair putty securely bonds to primer, metal, fiberglass and aluminum, and it resists gumming up sandpaper and shrinking. It can be used with all types of paint systems for professional-looking results. \u003c\/div\u003e\n\n\u003cdiv\u003e \u003c\/div\u003e\n\n\u003cdiv\u003e\u003cstrong\u003eUse During the Fill Stage of the 3M™ Body Repair System \u003c\/strong\u003e\u003c\/div\u003e\n\n\u003cdiv\u003eEven a small repair can seem complex at first. So 3M's Body Repair System simplifies the entire automotive body repair process by dividing it into four stages: \u003c\/div\u003e\n\n\u003cdiv\u003e \u003c\/div\u003e\n\n\u003cdiv\u003eStage 1 — Prepare. This stage includes pulling dents, removal of paint and rust and efficient, effective masking of the area. \u003c\/div\u003e\n\n\u003cdiv\u003e \u003c\/div\u003e\n\n\u003cdiv\u003eStage 2 — Fill. This stage involves patching holes with reinforced filler and smoothing and shaping filler before painting. \u003c\/div\u003e\n\n\u003cdiv\u003e \u003c\/div\u003e\n\n\u003cdiv\u003eStage 3 — Paint. This stage includes painting the area and blending and smoothing primer and paint. \u003c\/div\u003e\n\n\u003cdiv\u003e \u003c\/div\u003e\n\n\u003cdiv\u003eStage 4 — Finish. The final stage for showroom-grade results: removing small defects, sealing and polishing clear coats and other painted surfaces. \u003c\/div\u003e\n\n\u003cdiv\u003e \u003c\/div\u003e\n\n\u003cdiv\u003e3M supplies premium products such as abrasives, tapes, body fillers and tools for every stage. This system helps you work easily, efficiently and successfully across the entire body repair process.\u003c\/div\u003e\n","brand":"3M","offers":[{"title":"Default Title","offer_id":52323802808686,"sku":"GA076308008017","price":75.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/files\/076308008017N_8054cb82-78e9-43fd-a09a-e103eeab5ce1.jpg?v=1754712837"},{"product_id":"araldite-5-minute-epoxy-adhesive-holds-75kg-for-everyday-use-dries-clear-35ml","title":"Araldite 5 Minute Epoxy Adhesive Holds 75Kg For Everyday Use Dries Clear 35ml","description":"\u003cp\u003e\u003cstrong\u003eA fast setting strong and durable two part epoxy, general purpose adhesive. Mixed product gels in 5 minutes. Initial bonding is achieved in 20 minutes with maximum bond strength after 16 hours.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e\nAraldite is stronger than other glues due to the chemical reaction of the two parts\u003cbr\u003e\nBonds a variety of surfaces\u003cbr\u003e\nDries Clear\u003cbr\u003e\nQuick setting in 5 minutes\u003cbr\u003e\nNo clamping necessary\u003cbr\u003e\nModerate water resistance\u003cbr\u003e\nForms a rigid, durable bond\u003cbr\u003e\nCan be used for gap filling (surfaces need not mate closely)\u003cbr\u003e\nGood chemical resistance\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eAppearance\u003c\/strong\u003e\u003cbr\u003e\nClear with a slight yellow tinge\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhere can this product be used?\u003c\/strong\u003e\u003cbr\u003e\nBakelite – joining or repairing\u003cbr\u003e\nBonding shells, stones or pebbles to decorate bottles, lamps, bricks or garden pots\u003cbr\u003e\nRepairing splits or cracks in a tennis racket\u003cbr\u003e\nRepairing metal toys\u003cbr\u003e\nNot suitable for bonding plastics such as Polypropylene and Polyethylene\u003cbr\u003e\nBond strength weakens above 65°C but strength is regained when temperature drops\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat materials is this product suitable for?\u003c\/strong\u003e\u003cbr\u003e\nGlass\u003cbr\u003e\nMetal\u003cbr\u003e\nWood\u003cbr\u003e\nFabric\u003cbr\u003e\nRigid Plastic\u003cbr\u003e\nCrystal\u003cbr\u003e\nLeather\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eHow to use this product\u003c\/strong\u003e\u003cbr\u003e\n\u003cstrong\u003eGeneral Use\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBefore applying the Araldite mixture, all surfaces MUST be thoroughly clean and dry.\u003cbr\u003e\nAll traces of grease, rust paint, etc. should be removed.\u003cbr\u003e\nFor best results, smooth surfaces should be roughened by mechanical abrasion after solvent cleaning.\u003cbr\u003e\nOnto a clean, disposable surface (e.g. polyethylene or cardboard), dispense equal volumes of Part A and Part B. Thoroughly mix together with a spatula, nail or stick. When using the tubes it is essential to use the correct mixing ratio, i.e. 1 part each\u003cbr\u003e\nApply adhesive immediately to both surfaces and press together. Clamping is not necessary, but allow bond to remain undisturbed for at least 20 minutes. Scrape off excess adhesive and wipe mixing utensils immediately.\u003cbr\u003e\nWhen using the Araldite 5ml Everyday tube, ensure correct caps are replaced on each tube or they will harden.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eTo use Selleys Araldite Singles:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eFold – the pack in half, so that foil is back to back.\u003cbr\u003e\nTear – carefully along perforations.\u003cbr\u003e\nSqueeze – bubbles to extrude adhesive.\u003cbr\u003e\nMix – two parts together until well combined.\u003cbr\u003e\nApply – mixed adhesive to surfaces and bring together. Wipe off excess adhesive and do not apply undue strain to bond for 30 minutes.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eHandy tips\u003c\/strong\u003e\u003cbr\u003e\nFor maximum working time, mix in small quantities. Large quantities accelerate the curing process and reduce working time.\u003cbr\u003e\nTo extend product life replace caps immediately after use. Ensure you wipe excess from nozzle with a tissue dipped in acetone (or nail polish remover) before replacing the caps.\u003cbr\u003e\nWhen using the tube variant, ensure you replace the correct cap on the correct tube. Placing the wrong cap on the wrong tube will cause the tube to harden. (lids and tubes are colour coded to help)\u003cbr\u003e\nWipe off any uncured araldite with acetone or nail polish remover.\u003cbr\u003e\nTo remove product after cure, mechanical action (scraping or sanding) is recommended. Since the product is chemically resistant solvent will NOT dissolve this product.\u003cbr\u003e\nTo reposition the bond once cured, check that the item is heat resistant. If safe, heat the item slowly, e.g. in an oven, to at least 150oC. The product will soften and liquify slightly. Scrape off any excess then reposition the joint carefully using appropriate safety equipment. Allow the item to cool down in the correct position. The product will reharden once returned to room temperature.\u003cbr\u003e\nClamping is recommended for a stronger bond.\u003cbr\u003e\nSingles are great for those unexpected household breakages, so keep them at home, just in case.\u003cbr\u003e\nKeep a box of Selleys Sugar Soap Wipes around for quick \u0026amp; effective clean up.\u003cbr\u003e\nFor cleaning surfaces prior to application of adhesive, if the surface is porous, we would reccomend using Selleys Liquid Sugar Soap. If the surface is non-porous eg glass or metal, firstly clean the surface with Methylated Spirits. If there is old difficult to remove residue such as oold paint, we recommend using paint stripper such as Selleys Kwik Strip Smart. Ensure the surface is dry before applying the product.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSafety tips\u003c\/strong\u003e\u003cbr\u003e\nAvoid contact with the skin and eyes.\u003cbr\u003e\nAvoid breathing vapour.\u003cbr\u003e\nDo not use solvents near eyes or open wounds.\u003cbr\u003e\nIn case of contact with eyes, flush with water for at least 15 minutes and seek medical attention.\u003cbr\u003e\nNon toxic when set.\u003cbr\u003e\nFor further information refer to the Material Safety Data Sheet (MSDS).\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eStorage and re-use\u003c\/strong\u003e\u003cbr\u003e\nEnsure caps are replaced and product stored in a cool dry place.\u003c\/p\u003e\n","brand":"Selleys","offers":[{"title":"Default Title","offer_id":52323803496814,"sku":"GA9300697101402","price":18.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/files\/9300697101402.jpg?v=1754715640"},{"product_id":"araldite-5-minute-epoxy-adhesive-holds-up-to-75kg-for-everyday-use-24ml","title":"Araldite 5 Minute Epoxy Adhesive Holds Up to 75Kg For Everyday Use 24ml","description":"\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size:14px;\"\u003eA fast setting strong and durable two-part epoxy, general purpose adhesive. Mixed product gels in 5 minutes. Initial bonding is achieved in 20 minutes with maximum bond strength after 16 hours.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cspan style=\"font-size:14px;\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\nAraldite is stronger than other glues due to the chemical reaction of the two parts\u003cbr\u003e\nBonds a variety of surfaces\u003cbr\u003e\nDries Clear\u003cbr\u003e\nQuick setting in 5 minutes\u003cbr\u003e\nNo clamping necessary\u003cbr\u003e\nModerate water resistance\u003cbr\u003e\nForms a rigid, durable bond\u003cbr\u003e\nCan be used for gap filling (surfaces need not mate closely)\u003cbr\u003e\nGood chemical resistance\u003c\/span\u003e\u003cbr\u003e\n \u003c\/p\u003e\n\n\u003cp\u003e\u003cspan style=\"font-size:14px;\"\u003e\u003cstrong\u003eAppearance:\u003c\/strong\u003e\u003cbr\u003e\nClear with a slight yellow tinge\u003c\/span\u003e\u003cbr\u003e\n \u003c\/p\u003e\n\n\u003cp\u003e\u003cspan style=\"font-size:14px;\"\u003e\u003cstrong\u003eWhere can this product be used?\u003c\/strong\u003e\u003cbr\u003e\nBakelite – joining or repairing\u003cbr\u003e\nBonding shells, stones or pebbles to decorate bottles, lamps, bricks or garden pots\u003cbr\u003e\nRepairing splits or cracks in a tennis racket\u003cbr\u003e\nRepairing metal toys\u003cbr\u003e\nNot suitable for bonding plastics such as Polypropylene and Polyethylene\u003cbr\u003e\nBond strength weakens above 65°C but strength is regained when temperature drops\u003c\/span\u003e\u003cbr\u003e\n \u003c\/p\u003e\n\n\u003cp\u003e\u003cspan style=\"font-size:14px;\"\u003e\u003cstrong\u003eWhat materials is this product suitable for?\u003c\/strong\u003e\u003cbr\u003e\nGlass\u003cbr\u003e\nMetal\u003cbr\u003e\nWood\u003cbr\u003e\nFabric\u003cbr\u003e\nRigid Plastic\u003cbr\u003e\nCrystal\u003cbr\u003e\nLeather\u003c\/span\u003e\u003cbr\u003e\n \u003c\/p\u003e\n\n\u003cp\u003e\u003cspan style=\"font-size:14px;\"\u003e\u003cstrong\u003eHow to use this product:\u003c\/strong\u003e\u003cbr\u003e\n\u003cstrong\u003eGeneral Use\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cspan style=\"font-size:14px;\"\u003e-Before applying the Araldite mixture, all surfaces MUST be thoroughly clean and dry.\u003cbr\u003e\n-All traces of grease, rust paint, etc. should be removed.\u003c\/span\u003e\u003cbr\u003e\n\u003cspan style=\"font-size:14px;\"\u003e-For best results, smooth surfaces should be roughened by mechanical abrasion after solvent cleaning.\u003cbr\u003e\n-Onto a clean, disposable surface (e.g. polyethylene or cardboard), dispense equal volumes of Part A and Part B. Thoroughly mix together with a spatula, nail or stick.\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cspan style=\"font-size:14px;\"\u003e\u003cstrong\u003eSafety tips:\u003c\/strong\u003e\u003cbr\u003e\nAvoid contact with the skin and eyes.\u003cbr\u003e\nAvoid breathing vapour.\u003cbr\u003e\nDo not use solvents near eyes or open wounds.\u003cbr\u003e\nIn case of contact with eyes, flush with water for at least 15 minutes and seek medical attention.\u003cbr\u003e\nNon toxic when set.\u003cbr\u003e\nFor further information refer to the Material Safety Data Sheet (MSDS).\u003cbr\u003e\nStorage and re-use\u003cbr\u003e\nEnsure caps are replaced and product stored in a cool dry place.\u003c\/span\u003e\u003c\/p\u003e\n","brand":"Selleys","offers":[{"title":"Default Title","offer_id":52323803529582,"sku":"GA9300697106391","price":14.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/files\/9300697106391_9a0570bb-ec6a-4833-9409-0afa48ccc932.jpg?v=1754715643"},{"product_id":"araldite-5-minute-epoxy-adhesive-holds-up-to-75kg-for-everyday-use-dries-clear-8ml","title":"Araldite 5 Minute Epoxy Adhesive Holds Up to 75Kg For Everyday Use Dries Clear 8ml","description":"\u003cp\u003e\u003cstrong\u003eA fast setting strong and durable two part epoxy, general purpose adhesive. Mixed product gels in 5 minutes. Initial bonding is achieved in 20 minutes with maximum bond strength after 16 hours.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e\nAraldite is stronger than other glues due to the chemical reaction of the two parts\u003cbr\u003e\nBonds a variety of surfaces\u003cbr\u003e\nDries Clear\u003cbr\u003e\nQuick setting in 5 minutes\u003cbr\u003e\nNo clamping necessary\u003cbr\u003e\nModerate water resistance\u003cbr\u003e\nForms a rigid, durable bond\u003cbr\u003e\nCan be used for gap filling (surfaces need not mate closely)\u003cbr\u003e\nGood chemical resistance\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eAppearance\u003c\/strong\u003e\u003cbr\u003e\nClear with a slight yellow tinge\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhere can this product be used?\u003c\/strong\u003e\u003cbr\u003e\nBakelite – joining or repairing\u003cbr\u003e\nBonding shells, stones or pebbles to decorate bottles, lamps, bricks or garden pots\u003cbr\u003e\nRepairing splits or cracks in a tennis racket\u003cbr\u003e\nRepairing metal toys\u003cbr\u003e\nNot suitable for bonding plastics such as Polypropylene and Polyethylene\u003cbr\u003e\nBond strength weakens above 65°C but strength is regained when temperature drops\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat materials is this product suitable for?\u003c\/strong\u003e\u003cbr\u003e\nGlass\u003cbr\u003e\nMetal\u003cbr\u003e\nWood\u003cbr\u003e\nFabric\u003cbr\u003e\nRigid Plastic\u003cbr\u003e\nCrystal\u003cbr\u003e\nLeather\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eHow to use this product\u003c\/strong\u003e\u003cbr\u003e\n\u003cstrong\u003eGeneral Use\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBefore applying the Araldite mixture, all surfaces MUST be thoroughly clean and dry.\u003cbr\u003e\nAll traces of grease, rust paint, etc. should be removed.\u003cbr\u003e\nFor best results, smooth surfaces should be roughened by mechanical abrasion after solvent cleaning.\u003cbr\u003e\nOnto a clean, disposable surface (e.g. polyethylene or cardboard), dispense equal volumes of Part A and Part B. Thoroughly mix together with a spatula, nail or stick. When using the tubes it is essential to use the correct mixing ratio, i.e. 1 part each\u003cbr\u003e\nApply adhesive immediately to both surfaces and press together. Clamping is not necessary, but allow bond to remain undisturbed for at least 20 minutes. Scrape off excess adhesive and wipe mixing utensils immediately.\u003cbr\u003e\nWhen using the Araldite 5ml Everyday tube, ensure correct caps are replaced on each tube or they will harden.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eTo use Selleys Araldite Singles:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eFold – the pack in half, so that foil is back to back.\u003cbr\u003e\nTear – carefully along perforations.\u003cbr\u003e\nSqueeze – bubbles to extrude adhesive.\u003cbr\u003e\nMix – two parts together until well combined.\u003cbr\u003e\nApply – mixed adhesive to surfaces and bring together. Wipe off excess adhesive and do not apply undue strain to bond for 30 minutes.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eHandy tips\u003c\/strong\u003e\u003cbr\u003e\nFor maximum working time, mix in small quantities. Large quantities accelerate the curing process and reduce working time.\u003cbr\u003e\nTo extend product life replace caps immediately after use. Ensure you wipe excess from nozzle with a tissue dipped in acetone (or nail polish remover) before replacing the caps.\u003cbr\u003e\nWhen using the tube variant, ensure you replace the correct cap on the correct tube. Placing the wrong cap on the wrong tube will cause the tube to harden. (lids and tubes are colour coded to help)\u003cbr\u003e\nWipe off any uncured araldite with acetone or nail polish remover.\u003cbr\u003e\nTo remove product after cure, mechanical action (scraping or sanding) is recommended. Since the product is chemically resistant solvent will NOT dissolve this product.\u003cbr\u003e\nTo reposition the bond once cured, check that the item is heat resistant. If safe, heat the item slowly, e.g. in an oven, to at least 150oC. The product will soften and liquify slightly. Scrape off any excess then reposition the joint carefully using appropriate safety equipment. Allow the item to cool down in the correct position. The product will reharden once returned to room temperature.\u003cbr\u003e\nClamping is recommended for a stronger bond.\u003cbr\u003e\nSingles are great for those unexpected household breakages, so keep them at home, just in case.\u003cbr\u003e\nKeep a box of Selleys Sugar Soap Wipes around for quick \u0026amp; effective clean up.\u003cbr\u003e\nFor cleaning surfaces prior to application of adhesive, if the surface is porous, we would reccomend using Selleys Liquid Sugar Soap. If the surface is non-porous eg glass or metal, firstly clean the surface with Methylated Spirits. If there is old difficult to remove residue such as oold paint, we recommend using paint stripper such as Selleys Kwik Strip Smart. Ensure the surface is dry before applying the product.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSafety tips\u003c\/strong\u003e\u003cbr\u003e\nAvoid contact with the skin and eyes.\u003cbr\u003e\nAvoid breathing vapour.\u003cbr\u003e\nDo not use solvents near eyes or open wounds.\u003cbr\u003e\nIn case of contact with eyes, flush with water for at least 15 minutes and seek medical attention.\u003cbr\u003e\nNon toxic when set.\u003cbr\u003e\nFor further information refer to the Material Safety Data Sheet (MSDS).\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eStorage and re-use\u003c\/strong\u003e\u003cbr\u003e\nEnsure caps are replaced and product stored in a cool dry place.\u003c\/p\u003e\n","brand":"Selleys","offers":[{"title":"Default Title","offer_id":52323803562350,"sku":"GA9300697107619","price":11.05,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/files\/9300697107619_0cdc511b-b02f-4d15-9c78-963fd2dddc64.jpg?v=1754715646"},{"product_id":"araldite-5-minute-epoxy-adhesive-with-self-mixing-nozzle-14ml","title":"Araldite 5 Minute Epoxy Adhesive With Self Mixing Nozzle 14ml","description":"\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 14px;\"\u003eA fast setting strong and durable two-part epoxy, general purpose adhesive. Mixed product gels in 5 minutes. Initial bonding is achieved in 20 minutes with maximum bond strength after 16 hours.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\nAraldite is stronger than other glues due to the chemical reaction of the two parts\u003cbr\u003e\nBonds a variety of surfaces\u003cbr\u003e\nDries Clear\u003cbr\u003e\nQuick setting in 5 minutes\u003cbr\u003e\nNo clamping necessary\u003cbr\u003e\nModerate water resistance\u003cbr\u003e\nForms a rigid, durable bond\u003cbr\u003e\nCan be used for gap filling (surfaces need not mate closely)\u003cbr\u003e\nGood chemical resistance\u003c\/span\u003e\u003cbr\u003e\n \u003c\/p\u003e\n\n\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003e\u003cstrong\u003eAppearance:\u003c\/strong\u003e\u003cbr\u003e\nClear with a slight yellow tinge\u003c\/span\u003e\u003cbr\u003e\n \u003c\/p\u003e\n\n\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003e\u003cstrong\u003eWhere can this product be used?\u003c\/strong\u003e\u003cbr\u003e\nBakelite – joining or repairing\u003cbr\u003e\nBonding shells, stones or pebbles to decorate bottles, lamps, bricks or garden pots\u003cbr\u003e\nRepairing splits or cracks in a tennis racket\u003cbr\u003e\nRepairing metal toys\u003cbr\u003e\nNot suitable for bonding plastics such as Polypropylene and Polyethylene\u003cbr\u003e\nBond strength weakens above 65°C but strength is regained when temperature drops\u003c\/span\u003e\u003cbr\u003e\n \u003c\/p\u003e\n\n\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003e\u003cstrong\u003eWhat materials is this product suitable for?\u003c\/strong\u003e\u003cbr\u003e\nGlass\u003cbr\u003e\nMetal\u003cbr\u003e\nWood\u003cbr\u003e\nFabric\u003cbr\u003e\nRigid Plastic\u003cbr\u003e\nCrystal\u003cbr\u003e\nLeather\u003c\/span\u003e\u003cbr\u003e\n \u003c\/p\u003e\n\n\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003e\u003cstrong\u003eHow to use this product:\u003c\/strong\u003e\u003cbr\u003e\n\u003cstrong\u003eGeneral Use\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003e-Before applying the Araldite mixture, all surfaces MUST be thoroughly clean and dry.\u003cbr\u003e\n-All traces of grease, rust paint, etc. should be removed.\u003c\/span\u003e\u003cbr\u003e\n\u003cspan style=\"font-size: 14px;\"\u003e-For best results, smooth surfaces should be roughened by mechanical abrasion after solvent cleaning.\u003cbr\u003e\n-Onto a clean, disposable surface (e.g. polyethylene or cardboard), dispense equal volumes of Part A and Part B. Thoroughly mix together with a spatula, nail or stick.\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003e\u003cstrong\u003eSafety tips:\u003c\/strong\u003e\u003cbr\u003e\nAvoid contact with the skin and eyes.\u003cbr\u003e\nAvoid breathing vapour.\u003cbr\u003e\nDo not use solvents near eyes or open wounds.\u003cbr\u003e\nIn case of contact with eyes, flush with water for at least 15 minutes and seek medical attention.\u003cbr\u003e\nNon toxic when set.\u003cbr\u003e\nFor further information refer to the Material Safety Data Sheet (MSDS).\u003cbr\u003e\nStorage and re-use\u003cbr\u003e\nEnsure caps are replaced and product stored in a cool dry place.\u003c\/span\u003e\u003c\/p\u003e\n","brand":"Selleys","offers":[{"title":"Default Title","offer_id":52323803595118,"sku":"GA9300697124630","price":8.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/files\/6a9214b9b6d34a72b1d4487b95abcf4f.jpg?v=1757753400"},{"product_id":"araldite-quick-set-epoxy-adhesive-90-second-bond-easy-mix-rigid-bond-14ml","title":"Araldite Quick Set Epoxy Adhesive 90 Second Bond Easy Mix Rigid Bond 14ml","description":"\u003cp\u003e\u003cstrong\u003eA very fast setting two part epoxy adhesive. Initial bonding achieved in 90 seconds with maximum bond strength after 16 hours.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e\nAraldite is stronger than other glues due to the chemical reaction of the two parts\u003cbr\u003e\nBonds a variety of surfaces\u003cbr\u003e\nDries Clear\u003cbr\u003e\nVery quick setting in 90 seconds\u003cbr\u003e\nNo clamping necessary\u003cbr\u003e\nModerate water resistance\u003cbr\u003e\nForms a rigid, durable bond\u003cbr\u003e\nCan be used for gap filling\u003cbr\u003e\nGood chemical resistance\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhere can this product be used?\u003c\/strong\u003e\u003cbr\u003e\nGeneral small household repairs\u003cbr\u003e\nFixing gemstones to mounts\u003cbr\u003e\nRepairing metal toys\u003cbr\u003e\nNot suitable for bonding plastics such as Polypropylene and Polyethylene\u003cbr\u003e\nBond strength weakens above 65°C but strength is regained when temperature drops\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat materials is this product suitable for?\u003c\/strong\u003e\u003cbr\u003e\nGlass\u003cbr\u003e\nMetal\u003cbr\u003e\nWood\u003cbr\u003e\nFabric\u003cbr\u003e\nMost Plastics\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eHow to use this product\u003c\/strong\u003e\u003cbr\u003e\nGeneral Use\u003c\/p\u003e\n\n\u003cp\u003eBefore applying the Araldite mixture, all surfaces MUST be thoroughly clean and dry.\u003cbr\u003e\nAll traces of grease, rust paint, etc. should be removed.\u003cbr\u003e\nFor best results smooth surfaces should be roughened by mechanical abrasion after solvent cleaning.\u003cbr\u003e\nOnto a clean, disposable surface (e.g. polyethylene or cardboard), dispense equal volumes of Part A and Part B. Thoroughly mix together with a spatula, nail or stick. When using the tubes it is essential to use the correct mixing ratio, i.e. 1 part each\u003cbr\u003e\nApply adhesive immediately to both surfaces and press together. Scrape off excess adhesive and wipe mixing utensils immediately.\u003cbr\u003e\nEnsure correct caps are replaced on each tube or they will adhere.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eHandy tips\u003c\/strong\u003e\u003cbr\u003e\nNote: For information on how to identify plastics refer to the Selleys plastics guide.\u003cbr\u003e\nFor maximum working time, mix in small quantities. Large quantities accelerate the curing process and reduce working time.\u003cbr\u003e\nTo extend product life replace caps immediately after use. Ensure you wipe excess from nozzle with a tissue dipped in acetone (or nail polish remover) before replacing cap.\u003cbr\u003e\nWhen using the tube variant, ensure you replace the correct cap on the correct tube. Placing the wrong cap on the wrong tube will cause the tube to harden. (lids and tubes are colour coded to help)\u003cbr\u003e\nWipe off any uncured Araldite with acetone or nail polish remover.\u003cbr\u003e\nTo remove product after cure, mechanical action (scraping or sanding) is recommended. Since the product is chemically resistant solvent will NOT dissolve this product.\u003cbr\u003e\nTo reposition the bond once cured, check that the item is heat resistant. If safe, heat the item slowly, e.g. in an oven, to at least 150oC. The product will soften and liquify slightly. Scrape off any excess then reposition the joint carefully using appropriate safety equipment. Allow the item to cool down in the correct position. The product will reharden once returned to room temperature.\u003cbr\u003e\nClamping recommended for a stronger bond.\u003cbr\u003e\nSingles are great for those unexpected household breakages, so keep a couple at home just in case.\u003cbr\u003e\nKeep a box of Selleys Sugar Soap Wipes around for quick \u0026amp; effective clean up\u003cbr\u003e\nFor cleaning surfaces prior to application of adhesive, if the surface is porous, we would recommend using Selleys Liquid Sugar Soap. If the surface is non-porous eg glass or metal, firstly clean the surface with Methylated Spirits. If there is old difficult to remove residue such as cold paint, we recommend using paint stripper such as Selleys Kwik Strip Smart. Ensure the surface is dry before applying the product.\u003c\/p\u003e\n","brand":"Selleys","offers":[{"title":"Default Title","offer_id":52323803627886,"sku":"GA9300697124647","price":19.26,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/files\/43cbf28cd34d46da872e14bead1885e2.jpg?v=1757753397"},{"product_id":"araldite-quick-set-epoxy-adhesive-90-second-bond-easy-mix-rigid-bond-24ml","title":"Araldite Quick Set Epoxy Adhesive 90 Second Bond Easy Mix Rigid Bond 24ml","description":"\u003cp\u003e\u003cstrong\u003eA very fast setting two part epoxy adhesive. Initial bonding achieved in 90 seconds with maximum bond strength after 16 hours.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e\nAraldite is stronger than other glues due to the chemical reaction of the two parts\u003cbr\u003e\nBonds a variety of surfaces\u003cbr\u003e\nDries Clear\u003cbr\u003e\nVery quick setting in 90 seconds\u003cbr\u003e\nNo clamping necessary\u003cbr\u003e\nModerate water resistance\u003cbr\u003e\nForms a rigid, durable bond\u003cbr\u003e\nCan be used for gap filling\u003cbr\u003e\nGood chemical resistance\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhere can this product be used?\u003c\/strong\u003e\u003cbr\u003e\nGeneral small household repairs\u003cbr\u003e\nFixing gemstones to mounts\u003cbr\u003e\nRepairing metal toys\u003cbr\u003e\nNot suitable for bonding plastics such as Polypropylene and Polyethylene\u003cbr\u003e\nBond strength weakens above 65°C but strength is regained when temperature drops\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat materials is this product suitable for?\u003c\/strong\u003e\u003cbr\u003e\nGlass\u003cbr\u003e\nMetal\u003cbr\u003e\nWood\u003cbr\u003e\nFabric\u003cbr\u003e\nMost Plastics\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eHow to use this product\u003c\/strong\u003e\u003cbr\u003e\nGeneral Use\u003c\/p\u003e\n\n\u003cp\u003eBefore applying the Araldite mixture, all surfaces MUST be thoroughly clean and dry.\u003cbr\u003e\nAll traces of grease, rust paint, etc. should be removed.\u003cbr\u003e\nFor best results smooth surfaces should be roughened by mechanical abrasion after solvent cleaning.\u003cbr\u003e\nOnto a clean, disposable surface (e.g. polyethylene or cardboard), dispense equal volumes of Part A and Part B. Thoroughly mix together with a spatula, nail or stick. When using the tubes it is essential to use the correct mixing ratio, i.e. 1 part each\u003cbr\u003e\nApply adhesive immediately to both surfaces and press together. Scrape off excess adhesive and wipe mixing utensils immediately.\u003cbr\u003e\nEnsure correct caps are replaced on each tube or they will adhere.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eHandy tips\u003c\/strong\u003e\u003cbr\u003e\nNote: For information on how to identify plastics refer to the Selleys plastics guide.\u003cbr\u003e\nFor maximum working time, mix in small quantities. Large quantities accelerate the curing process and reduce working time.\u003cbr\u003e\nTo extend product life replace caps immediately after use. Ensure you wipe excess from nozzle with a tissue dipped in acetone (or nail polish remover) before replacing cap.\u003cbr\u003e\nWhen using the tube variant, ensure you replace the correct cap on the correct tube. Placing the wrong cap on the wrong tube will cause the tube to harden. (lids and tubes are colour coded to help)\u003cbr\u003e\nWipe off any uncured Araldite with acetone or nail polish remover.\u003cbr\u003e\nTo remove product after cure, mechanical action (scraping or sanding) is recommended. Since the product is chemically resistant solvent will NOT dissolve this product.\u003cbr\u003e\nTo reposition the bond once cured, check that the item is heat resistant. If safe, heat the item slowly, e.g. in an oven, to at least 150oC. The product will soften and liquify slightly. Scrape off any excess then reposition the joint carefully using appropriate safety equipment. Allow the item to cool down in the correct position. The product will reharden once returned to room temperature.\u003cbr\u003e\nClamping recommended for a stronger bond.\u003cbr\u003e\nSingles are great for those unexpected household breakages, so keep a couple at home just in case.\u003cbr\u003e\nKeep a box of Selleys Sugar Soap Wipes around for quick \u0026amp; effective clean up\u003cbr\u003e\nFor cleaning surfaces prior to application of adhesive, if the surface is porous, we would recommend using Selleys Liquid Sugar Soap. If the surface is non-porous eg glass or metal, firstly clean the surface with Methylated Spirits. If there is old difficult to remove residue such as cold paint, we recommend using paint stripper such as Selleys Kwik Strip Smart. Ensure the surface is dry before applying the product.\u003c\/p\u003e\n","brand":"Selleys","offers":[{"title":"Default Title","offer_id":52323803660654,"sku":"GA9300697114822","price":28.96,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/files\/9300697114822_60b5d83e-96ef-4a66-a2d0-d06ad9318d83.jpg?v=1754715649"},{"product_id":"araldite-super-strenght-expoxy-adhesive-holds-heavy-loads-up-to-150kg-24ml","title":"Araldite Super Strenght Expoxy Adhesive Holds Heavy Loads Up to 150Kg 24ml","description":"\u003cp\u003e\u003cstrong\u003eA two-part epoxy adhesive that bonds with maximum strength.\u003c\/strong\u003e Mixed product gels in 2 hours. Initial bonding is achieved in 6–8 hours, with maximum bond strength after 3 days.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStronger than other glues due to the chemical reaction of the two parts\u003c\/li\u003e\n\u003cli\u003eBonds a variety of surfaces\u003c\/li\u003e\n\u003cli\u003eDries clear\u003c\/li\u003e\n\u003cli\u003eVery strong and durable bonding\u003c\/li\u003e\n\u003cli\u003eHigh water resistance (suitable for tiles around pools, but not below the water line  for that use Selleys Knead It Aqua)\u003c\/li\u003e\n\u003cli\u003eForms a rigid, durable bond\u003c\/li\u003e\n\u003cli\u003eCan be used for gap filling (surfaces need not mate closely)\u003c\/li\u003e\n\u003cli\u003eGood chemical resistance\u003c\/li\u003e\n\u003cli\u003eHeat resistant\u003c\/li\u003e\n\u003cli\u003eClamping recommended for stronger bond\u003c\/li\u003e\n\u003cli\u003eNot suitable for bonding plastics such as Polypropylene and Polyethylene\u003c\/li\u003e\n\u003cli\u003eBond strength weakens above 80°C but is regained when temperature drops\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAppearance\u003c\/h3\u003e\n\u003cp\u003eTranslucent\u003c\/p\u003e\n\u003ch3\u003eWhere Can This Product Be Used?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLoad-bearing repairs\u003c\/li\u003e\n\u003cli\u003eGluing the head back on a hammer\u003c\/li\u003e\n\u003cli\u003eFixing loose table or chair legs\u003c\/li\u003e\n\u003cli\u003eBonding aluminium sheeting\u003c\/li\u003e\n\u003cli\u003eBonding timber on boats\u003c\/li\u003e\n\u003cli\u003eRepairing splits and cracks in cricket bats\u003c\/li\u003e\n\u003cli\u003eBonding fibreglass sheets\u003c\/li\u003e\n\u003cli\u003eRepairing skis\u003c\/li\u003e\n\u003cli\u003eFixing Dynabolts and metal rods into concrete\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSuitable Materials\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGlass\u003c\/li\u003e\n\u003cli\u003eMetal\u003c\/li\u003e\n\u003cli\u003eWood\u003c\/li\u003e\n\u003cli\u003eFabric\u003c\/li\u003e\n\u003cli\u003eRigid plastics (except Polyethylene and Polypropylene)\u003c\/li\u003e\n\u003cli\u003eCrystal\u003c\/li\u003e\n\u003cli\u003eLeather\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow to Use\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEnsure all surfaces are clean, dry, and free from grease, rust, or paint.\u003c\/li\u003e\n\u003cli\u003eFor best results, roughen smooth surfaces after solvent cleaning.\u003c\/li\u003e\n\u003cli\u003eDispense equal volumes of Part A and Part B onto a clean disposable surface (e.g. cardboard or polyethylene) and mix thoroughly.\u003c\/li\u003e\n\u003cli\u003eApply adhesive immediately to both surfaces and press together.\u003c\/li\u003e\n\u003cli\u003eClamp the bond for 6–8 hours while setting.\u003c\/li\u003e\n\u003cli\u003eScrape off excess adhesive and clean utensils immediately.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHandy Tips\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMix in small quantities for longer working time — large mixes cure faster.\u003c\/li\u003e\n\u003cli\u003eReplace caps immediately after use and wipe nozzles with acetone or nail polish remover before sealing.\u003c\/li\u003e\n\u003cli\u003eEnsure caps are placed on the correct tubes (they are colour-coded).\u003c\/li\u003e\n\u003cli\u003eRemove uncured adhesive with acetone or nail polish remover.\u003c\/li\u003e\n\u003cli\u003eOnce cured, remove by mechanical scraping or sanding — solvents will not dissolve the product.\u003c\/li\u003e\n\u003cli\u003eTo reposition a cured bond, heat slowly to at least 150°C (if safe for the material), then scrape off excess and reposition carefully.\u003c\/li\u003e\n\u003cli\u003eFor cleaning surfaces before use:\n\u003cul\u003e\n\u003cli\u003ePorous surfaces use Selleys Liquid Sugar Soap\u003c\/li\u003e\n\u003cli\u003eNon-porous surfaces (e.g. glass, metal) — clean with methylated spirits\u003c\/li\u003e\n\u003cli\u003eFor stubborn residue use Selleys Kwik Strip Smart\u003c\/li\u003e\n\u003c\/ul\u003e\nEnsure the surface is dry before applying.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSafety Tips\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAvoid contact with skin and eyes.\u003c\/li\u003e\n\u003cli\u003eAvoid breathing vapour.\u003c\/li\u003e\n\u003cli\u003eDo not use solvents near eyes or open wounds.\u003c\/li\u003e\n\u003cli\u003eIn case of eye contact, flush with water for 15 minutes and seek medical attention.\u003c\/li\u003e\n\u003cli\u003eNon-toxic when set.\u003c\/li\u003e\n\u003cli\u003eRefer to the Material Safety Data Sheet (MSDS) for more information.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eStorage \u0026amp; Reuse\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eReplace caps tightly after use.\u003c\/li\u003e\n\u003cli\u003eStore in a cool, dry place.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Selleys","offers":[{"title":"Default Title","offer_id":52323803693422,"sku":"GA9300697106384","price":24.5,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/files\/4015419b359242b5813b53fd57bf15ce.jpg?v=1757753394"},{"product_id":"araldite-super-strenght-expoxy-adhesive-maximum-bond-35ml","title":"Araldite Super Strenght Expoxy Adhesive Maximum Bond 35ml","description":"\u003cp\u003e\u003cstrong\u003eA two part epoxy adhesive that bonds with maximum strength. Mixed product gels in 2 hours. Initial bonding is achieved in 6-8 hours with maximum bond strength strength after 3 days.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e\nAraldite is stronger than other glues due to the chemical reaction of the two parts\u003cbr\u003e\nBonds a variety of surfaces\u003cbr\u003e\nDries Clear\u003cbr\u003e\nVery Strong, durable bonding\u003cbr\u003e\nVery high water resistance (e.g. OK for fixing tiles around pool, but not below the water line. For this use Selleys Knead it Aqua)\u003cbr\u003e\nForms a rigid, durable bond\u003cbr\u003e\nCan be used for gap filling (surfaces need not mate closely)\u003cbr\u003e\nGood chemical resistance\u003cbr\u003e\nHeat Resistant\u003cbr\u003e\nClamping is recommended to achieve a stronger bond\u003cbr\u003e\nNot suitable for bonding plastics such as Polypropylene and Polyethylene\u003cbr\u003e\nBond strength weakens above 80°C but strength is regained when temperature drops\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhere can this product be used?\u003c\/strong\u003e\u003cbr\u003e\nLoad bearing repairs\u003cbr\u003e\nGluing the head back on your hammer\u003cbr\u003e\nFixing loose table or chair legs.\u003cbr\u003e\nBonding solid pieces of Aluminium sheeting\u003cbr\u003e\nBonding timber on your boat\u003cbr\u003e\nRepairing splits and cracks in Cricket bats\u003cbr\u003e\nBonding fibreglass sheets\u003cbr\u003e\nRepairing Ski’s\u003cbr\u003e\nFixing Dynabolts and metal rods into concrete\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat materials is this product suitable for?\u003c\/strong\u003e\u003cbr\u003e\nGlass\u003cbr\u003e\nMetal\u003cbr\u003e\nWood\u003cbr\u003e\nFabric\u003cbr\u003e\nRigid Plastic – will not bond to Polyethylene or Polypropylene plastics\u003cbr\u003e\nCrystal\u003cbr\u003e\nLeather\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eHow to use this product\u003c\/strong\u003e\u003cbr\u003e\nBefore applying the Araldite mixture, all surfaces MUST be thoroughly clean and dry.\u003cbr\u003e\nAll traces of grease, rust paint, etc. should be removed.\u003cbr\u003e\nFor best results smooth surfaces should be roughened by mechanical abrasion after solvent cleaning.\u003cbr\u003e\nOnto a clean, disposable surface (e.g. polyethylene or cardboard), dispense equal volumes of Part A and Part B. Thoroughly mix together with a spatula, nail or stick. When using the tubes it is essential to use the correct mixing ratio, i.e. 1 part each\u003cbr\u003e\nApply adhesive immediately to both surfaces and press together. Clamping is necessary while bond sets over 6-8 hours. Scrape off excess adhesive and wipe mixing utensils immediately.\u003cbr\u003e\nWhen using tubes, Ensure correct caps are replaced on each tube or they will harden\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eHandy tips\u003c\/strong\u003e\u003cbr\u003e\nFor maximum working time, mix in small quantities. Large quantities accelerate the curing process and reduce working time.\u003cbr\u003e\nTo extend product life replace caps immediately after use. Ensure you wipe excess from nozzle with a tissue dipped in acetone (or nail polish remover) before replacing cap.\u003cbr\u003e\nWhen using the tube variant, ensure you replace the correct cap on the correct tube. Placing the wrong cap on the wrong tube will cause the tube to harden. (lids and tubes are colour coded to help)\u003cbr\u003e\nWipe off any uncured araldite with acetone or nail polish remover.\u003cbr\u003e\nTo remove product after cure, mechanical action (scraping or sanding) is recommended. Since the product is chemically resistant solvent will NOT dissolve this product.\u003cbr\u003e\nTo reposition the bond once cured, check that the item is heat resistant. If safe, heat the item slowly, e.g. in an oven, to at least 150oC. The product will soften and liquify slightly. Scrape off any excess then reposition the joint carefully using appropriate safety equipment. Allow the item to cool down in the correct position. The product will reharden once returned to room temperature.\u003cbr\u003e\nClamping recommended for a stronger bond.\u003cbr\u003e\nFor cleaning surfaces prior to application of adhesive, if the surface is porous, we would reccomend using Selleys Liquid Sugar Soap. If the surfact is non-porous eg glass or metal, firstly clean the surface with Methylated Spirits. If there is old difficult to remove residue such as oold paint, we recommend using paint stripper such as Selleys Kwik Strip Smart. Ensure the surface is dry before applying the product.\u003c\/p\u003e\n","brand":"Selleys","offers":[{"title":"Default Title","offer_id":52323803726190,"sku":"GA9300697101396","price":29.36,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/files\/9e61bba845cf44efb16e362aa8284217.jpg?v=1757753387"},{"product_id":"araldite-ultra-clear-epoxy-adhesive-dries-crystal-clear-8ml-holds-up-to-130kg","title":"Araldite Ultra Clear Epoxy Adhesive Dries Crystal Clear 8ml Holds Up to 130Kg","description":"\u003cp\u003e\u003cstrong\u003eA strong and durable, fast setting two part epoxy adhesive that dries crystal clear making it ideal for areas where an invisible bond is required. Mixed product gels in 5 minutes. Initial bonding is achieved in 20 minutes with maximum bond strength after 16 hours. Weather and yellowing resistant. Shock resistant.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003ciframe allow=\"autoplay; encrypted-media\" allowfullscreen=\"\" frameborder=\"0\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/G6nbhTG8Vhg?rel=0\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n-Araldite is stronger than other glues due to the chemical reaction of the two parts.\u003cbr\u003e\n-Bonds a variety of surfaces\u003cbr\u003e\n-Dries Crystal Clear so there’s no visible evidence of repair\u003cbr\u003e\n-Quick setting in 5 minutes\u003cbr\u003e\n-No clamping necessary\u003cbr\u003e\n-High water resistance\u003cbr\u003e\n-Forms a rigid, durable bond\u003cbr\u003e\n-Can be used for gap filling (Surfaces need not mate closely)\u003cbr\u003e\n-Good chemical resistance\u003cbr\u003e\n-Heat Resistant\u003cbr\u003e\n-Doesn’t yellow over time so is ideal for use on glassware\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eAppearance:\u003c\/strong\u003e\u003cbr\u003e\nCrystal Clear\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhere can this product be used?\u003c\/strong\u003e\u003cbr\u003e\n-Fixing a broken glass vase\u003cbr\u003e\n-Repairing jewellery\u003cbr\u003e\n-Toy repairs\u003cbr\u003e\n-Fixing ornaments or crockery\u003cbr\u003e\n-Fixing your handbag strap\u003cbr\u003e\n-Not suitable for bonding plastics such as Polypropylene and Polyethylene or for use on polystyrene\u003cbr\u003e\n-What materials is this product suitable for?\u003cbr\u003e\n-Glass\u003cbr\u003e\n-Metal\u003cbr\u003e\n-Wood\u003cbr\u003e\n-Fabric\u003cbr\u003e\n-Rigid Plastic – refer to Selley's plastic guide for more info\u003cbr\u003e\n-Crystal\u003cbr\u003e\n-Leather\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eHow to use this product:\u003c\/strong\u003e\u003cbr\u003e\n-Before applying the Araldite mixture, all surfaces MUST be thoroughly clean and dry.\u003cbr\u003e\n-All traces of grease, rust paint, etc. should be removed.\u003cbr\u003e\n-For best results, smooth surfaces should be roughened by mechanical abrasion after solvent cleaning.\u003cbr\u003e\n-Onto a clean, disposable surface (e.g. polyethylene or cardboard), dispense equal volumes of Part A and Part B. Thoroughly mix together with a spatula, nail or stick. When using the tubes it is essential to use the correct mixing ratio, i.e. 1 part each\u003cbr\u003e\n-Apply adhesive immediately to both surfaces and press together. Clamping is not necessary, but allow the bond to remain undisturbed for at least 20 minutes. Scrape off excess adhesive and wipe mixing utensils immediately.\u003cbr\u003e\n-When using tube kit, ensure correct caps are replaced on each tube or they will adhere.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eHandy tips:\u003c\/strong\u003e\u003cbr\u003e\n-A useful solvent to clean up epoxy and polyester resins BEFORE they are cured can be prepared by mixing 2 parts toluene with 1 part alcohol (eg methylated spirits or denatured alcohol).\u003cbr\u003e\n-Clamping is recommended for a stronger bond.\u003cbr\u003e\n-For a maximum working time, mix in small quantities. Large quantities accelerate the curing process and reduce working time.\u003cbr\u003e\n-To extend product life replace caps immediately after use.\u003cbr\u003e\n-When using the tube variant, ensure you replace the correct cap on the correct tube. Placing the wrong cap on the wrong tube will cause the tube to harden. (lids and tubes are colour coded to help)\u003cbr\u003e\n-Wipe off any uncured Araldite with acetone or nail polish remover.\u003cbr\u003e\n-To remove product after cure, mechanical action (scraping or sanding) is recommended. Since the product is chemically resistant solvent will NOT dissolve this product.\u003cbr\u003e\n-To reposition the bond once cured, check that the item is heat resistant. If safe, heat the item slowly, e.g. in an oven, to at least 150oC. The product will soften and liquify slightly. -Scrape off any excess then reposition the joint carefully using appropriate safety equipment. Allow the item to cool down in the correct position. The product will reharden once returned to room temperature.\u003cbr\u003e\n-Keep a box of Selleys Sugar Soap Wipes around for quick \u0026amp; effective cleanup\u003cbr\u003e\n-For cleaning surfaces prior to application of adhesive, if the surface is porous, we would recommend using Selleys Liquid Sugar Soap. If the surface is non-porous eg glass or metal, firstly clean the surface with Methylated Spirits. If there is old difficult to remove residue such as old paint, we recommend using paint stripper such as Selleys Kwik Strip Smart.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSafety tips:\u003c\/strong\u003e\u003cbr\u003e\n-Avoid contact with the skin and eyes.\u003cbr\u003e\n-Avoid breathing vapour.\u003cbr\u003e\n-Do not use solvents near eyes or open wounds.\u003cbr\u003e\n-In case of contact with eyes, flush with water for at least 15 minutes and seek medical attention.\u003cbr\u003e\n-Non-toxic when set.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eStorage and re-use:\u003c\/strong\u003e\u003cbr\u003e\nEnsure caps or lids are replaced and product stored in a cool dry place.\u003c\/p\u003e\n","brand":"Selleys","offers":[{"title":"Default Title","offer_id":52323803758958,"sku":"GA9300697114785","price":16.58,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/files\/9300697114785_dc89a20b-fb13-4299-a741-6c941e752bec.jpg?v=1754712785"},{"product_id":"araldite-ultra-clear-epoxy-adhesive-dries-crystal-clear-holds-up-to-130kg-ideal-for-glass-24ml","title":"Araldite Ultra Clear Epoxy Adhesive Dries Crystal Clear Holds Up to 130Kg Ideal for Glass 24ml","description":"\u003cp\u003e\u003cstrong\u003eA strong and durable, fast setting two part epoxy adhesive that dries crystal clear making it ideal for areas where an invisible bond is required. Mixed product gels in 5 minutes. Initial bonding is achieved in 20 minutes with maximum bond strength after 16 hours. Weather and yellowing resistant. Shock resistant.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003ciframe allow=\"autoplay; encrypted-media\" allowfullscreen=\"\" frameborder=\"0\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/G6nbhTG8Vhg?rel=0\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n-Araldite is stronger than other glues due to the chemical reaction of the two parts.\u003cbr\u003e\n-Bonds a variety of surfaces\u003cbr\u003e\n-Dries Crystal Clear so there’s no visible evidence of repair\u003cbr\u003e\n-Quick setting in 5 minutes\u003cbr\u003e\n-No clamping necessary\u003cbr\u003e\n-High water resistance\u003cbr\u003e\n-Forms a rigid, durable bond\u003cbr\u003e\n-Can be used for gap filling (Surfaces need not mate closely)\u003cbr\u003e\n-Good chemical resistance\u003cbr\u003e\n-Heat Resistant\u003cbr\u003e\n-Doesn’t yellow over time so is ideal for use on glassware\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eAppearance:\u003c\/strong\u003e\u003cbr\u003e\nCrystal Clear\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhere can this product be used?\u003c\/strong\u003e\u003cbr\u003e\n-Fixing a broken glass vase\u003cbr\u003e\n-Repairing jewellery\u003cbr\u003e\n-Toy repairs\u003cbr\u003e\n-Fixing ornaments or crockery\u003cbr\u003e\n-Fixing your handbag strap\u003cbr\u003e\n-Not suitable for bonding plastics such as Polypropylene and Polyethylene or for use on polystyrene\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat materials is this product suitable for?\u003c\/strong\u003e\u003cbr\u003e\n-Glass\u003cbr\u003e\n-Metal\u003cbr\u003e\n-Wood\u003cbr\u003e\n-Fabric\u003cbr\u003e\n-Rigid Plastic\u003cbr\u003e\n-Crystal\u003cbr\u003e\n-Leather\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eHow to use this product:\u003c\/strong\u003e\u003cbr\u003e\n-Before applying the Araldite mixture, all surfaces MUST be thoroughly clean and dry.\u003cbr\u003e\n-All traces of grease, rust paint, etc. should be removed.\u003cbr\u003e\n-For best results, smooth surfaces should be roughened by mechanical abrasion after solvent cleaning.\u003cbr\u003e\n-Onto a clean, disposable surface (e.g. polyethylene or cardboard), dispense equal volumes of Part A and Part B. Thoroughly mix together with a spatula, nail or stick. When using the tubes it is essential to use the correct mixing ratio, i.e. 1 part each\u003cbr\u003e\n-Apply adhesive immediately to both surfaces and press together. Clamping is not necessary, but allow the bond to remain undisturbed for at least 20 minutes. Scrape off excess adhesive and wipe mixing utensils immediately.\u003cbr\u003e\n-When using tube kit, ensure correct caps are replaced on each tube or they will adhere.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eHandy tips:\u003c\/strong\u003e\u003cbr\u003e\n-A useful solvent to clean up epoxy and polyester resins BEFORE they are cured can be prepared by mixing 2 parts toluene with 1 part alcohol (eg methylated spirits or denatured alcohol).\u003cbr\u003e\n-Clamping is recommended for a stronger bond.\u003cbr\u003e\n-For a maximum working time, mix in small quantities. Large quantities accelerate the curing process and reduce working time.\u003cbr\u003e\n-To extend product life replace caps immediately after use.\u003cbr\u003e\n-When using the tube variant, ensure you replace the correct cap on the correct tube. Placing the wrong cap on the wrong tube will cause the tube to harden. (lids and tubes are colour coded to help)\u003cbr\u003e\n-Wipe off any uncured Araldite with acetone or nail polish remover.\u003cbr\u003e\n-To remove product after cure, mechanical action (scraping or sanding) is recommended. Since the product is chemically resistant solvent will NOT dissolve this product.\u003cbr\u003e\n-To reposition the bond once cured, check that the item is heat resistant. If safe, heat the item slowly, e.g. in an oven, to at least 150oC. The product will soften and liquify slightly. -Scrape off any excess then reposition the joint carefully using appropriate safety equipment. Allow the item to cool down in the correct position. The product will reharden once returned to room temperature.\u003cbr\u003e\n-Keep a box of Selleys Sugar Soap Wipes around for quick \u0026amp; effective cleanup\u003cbr\u003e\n-For cleaning surfaces prior to application of adhesive, if the surface is porous, we would recommend using Selleys Liquid Sugar Soap. If the surface is non-porous eg glass or metal, firstly clean the surface with Methylated Spirits. If there is old difficult to remove residue such as old paint, we recommend using paint stripper such as Selleys Kwik Strip Smart.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSafety tips:\u003c\/strong\u003e\u003cbr\u003e\n-Avoid contact with the skin and eyes.\u003cbr\u003e\n-Avoid breathing vapour.\u003cbr\u003e\n-Do not use solvents near eyes or open wounds.\u003cbr\u003e\n-In case of contact with eyes, flush with water for at least 15 minutes and seek medical attention.\u003cbr\u003e\n-Non-toxic when set.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eStorage and re-use:\u003c\/strong\u003e\u003cbr\u003e\nEnsure caps or lids are replaced and product stored in a cool dry place.\u003c\/p\u003e\n","brand":"Selleys","offers":[{"title":"Default Title","offer_id":52323803791726,"sku":"GA9300697114792","price":21.85,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/files\/f6af08941c934b5986c5f74f7d2625fe.jpg?v=1757753383"},{"product_id":"bostik-epoxy-bond-industrial-strength-adhesive-multi-purpose-10ml","title":"Bostik Epoxy Bond Industrial Strength Adhesive Multi Purpose 10ml","description":"\u003cp\u003e\u003cstrong\u003eBostik Epoxy Bond is a special two-part adhesive which, when mixed and allowed to set, produces bonds of immense strength. This resin based epoxy sets in approximately 5 minutes to give a permanent and colourless bond. It will \u003c\/strong\u003e\u003cstrong\u003eadhere to \u003c\/strong\u003e\u003cstrong\u003epottery, china, metals, glass, wood, rigid and \u003c\/strong\u003e\u003cstrong\u003esemi-rigid\u003c\/strong\u003e\u003cstrong\u003e plastics and cardboard, etc. where an Industrial strength bond is required by handymen, hobbyists and tradesmen.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFEATURES AND BENEFITS\u003c\/strong\u003e\u003cbr\u003e\n1. Quick setting – will bond in 5 minutes\u003cbr\u003e\n2. When fully cured, the adhesive can withstand boiling water for short periods of time.\u003cbr\u003e\n3. Heat resistance rating of 60ºC temperature continuously.\u003cbr\u003e\n4. Adhesive shear strength of up to 800 psi for metal\/metal bonds\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eAPPLICATION\u003c\/strong\u003e\u003cbr\u003e\n1. Surfaces to be joined must be clean, dry and free from dirt and grease. Metals should be abraded and washed with a petroleum solvent. China and pottery should be washed in detergent, rinsed and dried.\u003cbr\u003e\n2. Dispense and mix thoroughly, sufficient material of the two parts to carry out the job at hand with a matchstick, screwdriver or similar implement. Reseal the nozzles of the syringe with the enclosed plug and tube with cap and store in an upright position (nozzles upward).\u003cbr\u003e\n3. Apply a thin film of adhesive to one or both of the surfaces to be joined, press together and do not move until the adhesive has set - usually 5 minutes @ 20ºC. Very good handling strength is obtained after 20 minutes and maximum adhesion is achieved after 24 hours\u003c\/p\u003e\n","brand":"Bostik","offers":[{"title":"Default Title","offer_id":52323805266286,"sku":"GA9310492002859","price":9.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/files\/9310492002859_579fab47-0276-49ba-937b-3ec9b8467a21.jpg?v=1754712732"},{"product_id":"dunlop-floor-repairer-rapid-patch-mortar-5kg","title":"Dunlop Floor Repairer Rapid Patch Mortar – 5kg","description":"\u003cp data-end=\"655\" data-start=\"238\"\u003eDunlop Floor Repairer Rapid Patch Mortar is a high-performance, fast-setting compound ideal for repairing holes, cracks, and uneven surfaces on internal floors. Suitable for use prior to the installation of tiles, vinyl, carpet, or other floor coverings, it delivers a smooth, level finish ready for light foot traffic within 45 minutes and covering applications in as little as 2 hours.\u003c\/p\u003e\n\n\u003cp data-end=\"1069\" data-start=\"657\"\u003e\u003cstrong data-end=\"681\" data-start=\"657\"\u003eSurface Preparation:\u003c\/strong\u003e\u003cbr data-end=\"684\" data-start=\"681\"\u003e\nEnsure the substrate is clean, sound, and free of grease, dust, oil, paint, or other contaminants. Surfaces should be dry and firm. Smooth or sealed surfaces must be roughened or etched. For porous substrates like timber, fibre-cement, or plasterboard, priming may be required. For floors in direct contact with soil, a moisture barrier should be used before applying the patch mortar.\u003c\/p\u003e\n\n\u003cp data-end=\"1294\" data-start=\"1071\"\u003e\u003cstrong data-end=\"1095\" data-start=\"1071\"\u003eMixing Instructions:\u003c\/strong\u003e\u003cbr data-end=\"1098\" data-start=\"1095\"\u003e\nAdd 5kg of product into approximately 1.5L of clean water in a clean container. Mix thoroughly with a mixing paddle to a lump-free, smooth consistency. Mix only what can be used within 15 minutes.\u003c\/p\u003e\n\n\u003cp data-end=\"1603\" data-start=\"1296\"\u003e\u003cstrong data-end=\"1325\" data-start=\"1296\"\u003eApplication Instructions:\u003c\/strong\u003e\u003cbr data-end=\"1328\" data-start=\"1325\"\u003e\nApply with a steel trowel to the required thickness (up to 20mm in a single application). Shape and smooth the surface before the material begins to set. For deeper repairs, additional layers can be applied once the initial layer has set. Avoid adding extra water once mixed.\u003c\/p\u003e\n\n\u003cp data-end=\"1728\" data-start=\"1605\"\u003e\u003cstrong data-end=\"1618\" data-start=\"1605\"\u003eCoverage:\u003c\/strong\u003e\u003cbr data-end=\"1621\" data-start=\"1618\"\u003e\nApproximately 3m² at 1mm thickness per 5kg bag. Coverage varies with surface texture and thickness applied.\u003c\/p\u003e\n\n\u003cp data-end=\"1748\" data-start=\"1730\"\u003e\u003cstrong data-end=\"1746\" data-start=\"1730\"\u003eDrying Time:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul data-end=\"1905\" data-start=\"1749\"\u003e\n\u003cli data-end=\"1777\" data-start=\"1749\"\u003e\n\u003cp data-end=\"1777\" data-start=\"1751\"\u003eInitial set: ~45 minutes\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"1834\" data-start=\"1778\"\u003e\n\u003cp data-end=\"1834\" data-start=\"1780\"\u003eReady for coverings (tiles, vinyl, carpet): ~2 hours\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"1905\" data-start=\"1835\"\u003e\n\u003cp data-end=\"1905\" data-start=\"1837\"\u003eFinal cure: 24 hours (depending on thickness and ambient conditions)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp data-end=\"1995\" data-start=\"1907\"\u003e\u003cstrong data-end=\"1920\" data-start=\"1907\"\u003eClean Up:\u003c\/strong\u003e\u003cbr data-end=\"1923\" data-start=\"1920\"\u003e\nClean tools and equipment immediately with water before the mortar sets.\u003c\/p\u003e\n\n\u003cp data-end=\"2018\" data-start=\"1997\"\u003e\u003cstrong data-end=\"2016\" data-start=\"1997\"\u003eTechnical Data:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul data-end=\"2287\" data-start=\"2019\"\u003e\n\u003cli data-end=\"2069\" data-start=\"2019\"\u003e\n\u003cp data-end=\"2069\" data-start=\"2021\"\u003eType: Rapid-setting cementitious repair mortar\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2107\" data-start=\"2070\"\u003e\n\u003cp data-end=\"2107\" data-start=\"2072\"\u003eApplication Thickness: Up to 20mm\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2132\" data-start=\"2108\"\u003e\n\u003cp data-end=\"2132\" data-start=\"2110\"\u003ePot Life: 15 minutes\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2161\" data-start=\"2133\"\u003e\n\u003cp data-end=\"2161\" data-start=\"2135\"\u003eFoot Traffic: 45 minutes\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2194\" data-start=\"2162\"\u003e\n\u003cp data-end=\"2194\" data-start=\"2164\"\u003eReady for Coverings: 2 hours\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2211\" data-start=\"2195\"\u003e\n\u003cp data-end=\"2211\" data-start=\"2197\"\u003eColour: Grey\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2287\" data-start=\"2212\"\u003e\n\u003cp data-end=\"2287\" data-start=\"2214\"\u003eShelf Life: 12 months in original unopened packaging stored in a dry area\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Dunlop","offers":[{"title":"Default Title","offer_id":52323813753198,"sku":"GA9315021022674","price":39.52,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/files\/Dunlop-FloorRepairerRapidPatch5kg-20050_1.jpg?v=1783140254"},{"product_id":"dunlop-multipurpose-floor-leveller-5kg","title":"Dunlop Multipurpose Floor Leveller – 5kg","description":"\u003cp data-end=\"659\" data-start=\"239\"\u003eDunlop Multipurpose Floor Leveller is a high-flow, cement-based compound ideal for smoothing and levelling uneven internal concrete surfaces before applying tiles, vinyl, carpet, or other floor coverings. Designed for ease of use, it pours and spreads to form a smooth surface ready for foot traffic and covering in minimal time. It’s perfect for domestic and light commercial applications.\u003c\/p\u003e\n\n\u003cp data-end=\"987\" data-start=\"661\"\u003e\u003cstrong data-end=\"685\" data-start=\"661\"\u003eSurface Preparation:\u003c\/strong\u003e\u003cbr data-end=\"688\" data-start=\"685\"\u003e\nEnsure the surface is sound, dry, and clean. Remove all traces of dust, grease, oil, curing compounds, wax, or any loose particles. New concrete must be fully cured. Mechanically remove surface laitance or contamination. Porous surfaces may require priming to reduce absorption and improve adhesion.\u003c\/p\u003e\n\n\u003cp data-end=\"1181\" data-start=\"989\"\u003e\u003cstrong data-end=\"1015\" data-start=\"989\"\u003ePriming (if required):\u003c\/strong\u003e\u003cbr data-end=\"1018\" data-start=\"1015\"\u003e\nApply a compatible primer using a broom or roller and allow it to dry before applying the leveller. On extremely porous substrates, a second coat may be necessary.\u003c\/p\u003e\n\n\u003cp data-end=\"1439\" data-start=\"1183\"\u003e\u003cstrong data-end=\"1207\" data-start=\"1183\"\u003eMixing Instructions:\u003c\/strong\u003e\u003cbr data-end=\"1210\" data-start=\"1207\"\u003e\nSlowly add the contents of the 5kg bag to approximately 1L of clean water while stirring with a mixing paddle. Mix for 2–3 minutes until a lump-free, smooth consistency is achieved. Do not retemper once the mixture begins to set.\u003c\/p\u003e\n\n\u003cp data-end=\"1723\" data-start=\"1441\"\u003e\u003cstrong data-end=\"1470\" data-start=\"1441\"\u003eApplication Instructions:\u003c\/strong\u003e\u003cbr data-end=\"1473\" data-start=\"1470\"\u003e\nPour the mixed product onto the floor and spread using a steel trowel or smoothing blade. The product will self-level and settle to a smooth finish. Apply at a thickness of 1–10mm in one application. Protect from foot traffic until it is fully cured.\u003c\/p\u003e\n\n\u003cp data-end=\"1851\" data-start=\"1725\"\u003e\u003cstrong data-end=\"1738\" data-start=\"1725\"\u003eCoverage:\u003c\/strong\u003e\u003cbr data-end=\"1741\" data-start=\"1738\"\u003e\nCovers approximately 3.5m² at 1mm thickness per 5kg bag. Coverage varies with substrate texture and thickness.\u003c\/p\u003e\n\n\u003cp data-end=\"1871\" data-start=\"1853\"\u003e\u003cstrong data-end=\"1869\" data-start=\"1853\"\u003eDrying Time:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul data-end=\"2042\" data-start=\"1872\"\u003e\n\u003cli data-end=\"1893\" data-start=\"1872\"\u003e\n\u003cp data-end=\"1893\" data-start=\"1874\"\u003eWalkable: 4 hours\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"1925\" data-start=\"1894\"\u003e\n\u003cp data-end=\"1925\" data-start=\"1896\"\u003eReady for tiling: 4–6 hours\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2042\" data-start=\"1926\"\u003e\n\u003cp data-end=\"2042\" data-start=\"1928\"\u003eReady for other coverings: 24 hours\u003cbr data-end=\"1966\" data-start=\"1963\"\u003e\nDry times will vary depending on temperature, humidity, and layer thickness.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp data-end=\"2180\" data-start=\"2044\"\u003e\u003cstrong data-end=\"2057\" data-start=\"2044\"\u003eClean Up:\u003c\/strong\u003e\u003cbr data-end=\"2060\" data-start=\"2057\"\u003e\nClean tools and mixing equipment with water immediately after use. Do not allow the product to dry on tools or surfaces.\u003c\/p\u003e\n\n\u003cp data-end=\"2203\" data-start=\"2182\"\u003e\u003cstrong data-end=\"2201\" data-start=\"2182\"\u003eTechnical Data:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul data-end=\"2461\" data-start=\"2204\"\u003e\n\u003cli data-end=\"2250\" data-start=\"2204\"\u003e\n\u003cp data-end=\"2250\" data-start=\"2206\"\u003eType: Cement-based self-levelling compound\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2289\" data-start=\"2251\"\u003e\n\u003cp data-end=\"2289\" data-start=\"2253\"\u003eApplication Thickness: 1mm to 10mm\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2321\" data-start=\"2290\"\u003e\n\u003cp data-end=\"2321\" data-start=\"2292\"\u003eWorking Time: 15–20 minutes\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2349\" data-start=\"2322\"\u003e\n\u003cp data-end=\"2349\" data-start=\"2324\"\u003eWalkable: After 4 hours\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2380\" data-start=\"2350\"\u003e\n\u003cp data-end=\"2380\" data-start=\"2352\"\u003eFinal Cure: Up to 24 hours\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2397\" data-start=\"2381\"\u003e\n\u003cp data-end=\"2397\" data-start=\"2383\"\u003eColour: Grey\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2461\" data-start=\"2398\"\u003e\n\u003cp data-end=\"2461\" data-start=\"2400\"\u003eShelf Life: 12 months if stored in original, sealed packaging\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Dunlop","offers":[{"title":"Default Title","offer_id":52323813884270,"sku":"GA9315021021318","price":40.2,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/files\/9315021021318_23476d37-d896-4e7e-b36b-16b7a72f53bd.jpg?v=1754712578"},{"product_id":"kwikgrip-water-based-high-strength-contact-adhesive-dries-clear-500ml","title":"KwikGrip Water Based High Strength Contact Adhesive Dries Clear 500ml","description":"\u003cp\u003e\u003cstrong\u003eKwik Grip Waterbased is a contact adhesive that is ideal for bonding flat, close fitting surfaces. Forms a durable, heat and water resistant bond for long lasting results.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e\nHigh Strength (Stronger than Kwik Grip or Kwik Grip Gel)\u003cbr\u003e\nEasy to use – Applies white, and turns clear when ready to join surfaces\u003cbr\u003e\nEasy to clean up – Cleans up with water\u003cbr\u003e\nLow odour\/Low VOC \/Non-toxic – No harmful solvent fumes (Safer than solvent based adhesives). Especially useful if repairing inside your home or in a confined space. E.g. Car.\u003cbr\u003e\nDries clear – For seamless repairs\u003cbr\u003e\nInstant bond – No clamping required* and in most cases repaired item can be used immediately. (*Clamping of warped or curled surfaces may be required)\u003cbr\u003e\nSuitable for use on horizontal or vertical surfaces\u003cbr\u003e\nCan be used in same method as other adhesives (wet bond) for small repairs.\u003cbr\u003e\nHeat resistant to 130oC\u003cbr\u003e\nNon-flammable\u003cbr\u003e\nCoverage: 500mL tub covers 1 surface up to 2.5m2 depending on porosity\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhere can this product be used?\u003c\/strong\u003e\u003cbr\u003e\nBonding veneers of timber and laminated plastics, eg. Laminex and Formica to bench tops, table tops or other furniture.\u003cbr\u003e\nAreas where clamping or pressing facilities are either not available or difficult to use.\u003cbr\u003e\nPatching vinyl flooring\u003cbr\u003e\nReplacing a vinyl tile\u003cbr\u003e\nCork tiling\u003cbr\u003e\nLaying a vinyl floor\u003cbr\u003e\nLeather work eg handbags\u003cbr\u003e\nAdhering flexible or other material to Aluminium\u003cbr\u003e\nJoining, repairing holes in tents, car covers and other outdoor equipment\u003cbr\u003e\nReplacing lifting edges or laying lino\u003cbr\u003e\nAttaching rubbers to your fridge door\u003cbr\u003e\nBonding labels to tins\u003cbr\u003e\nRepairing your wetsuit\u003cbr\u003e\nCraft and scrapbooking projects (safe to use on Polystyrene)Areas where clamping or pressing facilities are either not available or difficult to use\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat materials is this product suitable for?\u003c\/strong\u003e\u003cbr\u003e\nFabric\u003cbr\u003e\nLaminated plastics\u003cbr\u003e\nVeneers\u003cbr\u003e\nHard board\u003cbr\u003e\nPolystyrene foam\u003cbr\u003e\nFibrous cement sheet\u003cbr\u003e\nAluminium\u003cbr\u003e\nPolyurethane foam\u003cbr\u003e\nRubber\u003cbr\u003e\nCork\u003cbr\u003e\nLeather\u003cbr\u003e\nCanvas\u003cbr\u003e\nFelt\u003cbr\u003e\nMetals\u003cbr\u003e\nMost plastics (Not recommended for bonding Polyethylene or Polypropylene Plastics, for these we recommend Plastics Glue )\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eHow to use this product\u003c\/strong\u003e\u003cbr\u003e\nGeneral bonding – use contact method or for small porous surfaces join with a wet bond by applying Kwik Grip Advanced to one surface only and immediately press together and lightly clamp.\u003cbr\u003e\nKwik Grip Advanced can be used as wet bond on absorbent surfaces such as timber, cardboard etc.\u003cbr\u003e\nContact bonding:\u003cbr\u003e\n1 Ensure surfaces to be bonded are clean, dry and free from dirt, grease, dust or particles.\u003cbr\u003e\n2 Using applicator provided with pack, completely cover both surfaces with adhesive and keep surfaces apart until the surface turns from white to clear – approx. 20 minutes. Tip: use dowels or something similar to keep surfaces apart\u003cbr\u003e\n3 Position the items carefully, still keeping surfaces apart. When edges are perfectly aligned, remove dowels and working from one edge press surfaces firmly together. Note: Grabs IMMEDIATELY on contact.\u003cbr\u003e\n4 Secure bond by running a roller over the bonded surfaces or by hammering the surface from the centre outwards using a padded block. Maximum Bond strength is achieved after 24 hours.\u003cbr\u003e\nNote: Drying time may be extended in cold and wet weather conditions. Wet bonding:\u003cbr\u003e\nEnsure surfaces to be bonded are clean, dry and free from dirt, grease, dust or particles.\u003cbr\u003e\nApply to one surface then bring surfaces together and clamp until dry.\u003cbr\u003e\nClean up application tools and excess adhesive with damp cloth \u0026amp; water before it dries.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eHandy tips\u003c\/strong\u003e\u003cbr\u003e\nWhat is a contact adhesive? A contact adhesive is an adhesive that must be applied to two surfaces and allowed to dry before surfaces are joined. Once surfaces are pushed together an instant bond forms. Therefore extended pressure or clamping is unnecessary (*Clamping of warped or curled surfaces may be required)\u003cbr\u003e\nBeing Low VOC\/low odour this product is much safer for use indoors than most other contact adhesives which tend to be solvent-based..\u003cbr\u003e\nCan be used on horizontal or vertical surfaces\u003cbr\u003e\nIn the event of prolonged open time, Kwik Grip Advanced will continue to give good contact bond for up to 8 hours.\u003cbr\u003e\nWhat does this mean? This means that once you have applied the adhesive, if you suddenly need to run out to the shops or go and do another job, you can safely come back within 8 hours and join the two surfaces for a great result! Many solvent-based contact adhesives have a much shorter open time limit.\u003c\/p\u003e\n","brand":"Selleys","offers":[{"title":"Default Title","offer_id":52323817390446,"sku":"GA9300697118950","price":40.93,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/files\/9300697118950_0e0646ef-4c8a-4106-90fb-bcd6362afd1f.jpg?v=1754712414"},{"product_id":"kwikgrip-water-based-high-strength-multi-purpose-contact-adhesive-dries-clear-50ml","title":"KwikGrip Water Based High Strength Multi-purpose Contact Adhesive Dries Clear 50ml","description":"\u003cp\u003e\u003cstrong\u003eKwik Grip Waterbased is a contact adhesive that is ideal for bonding flat, close fitting surfaces. Forms a durable, heat and water resistant bond for long lasting results.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e\nHigh Strength (Stronger than Kwik Grip or Kwik Grip Gel)\u003cbr\u003e\nEasy to use – Applies white, and turns clear when ready to join surfaces\u003cbr\u003e\nEasy to clean up – Cleans up with water\u003cbr\u003e\nLow odour\/Low VOC \/Non-toxic – No harmful solvent fumes (Safer than solvent based adhesives). Especially useful if repairing inside your home or in a confined space. E.g. Car.\u003cbr\u003e\nDries clear – For seamless repairs\u003cbr\u003e\nInstant bond – No clamping required* and in most cases repaired item can be used immediately. (*Clamping of warped or curled surfaces may be required)\u003cbr\u003e\nSuitable for use on horizontal or vertical surfaces\u003cbr\u003e\nCan be used in same method as other adhesives (wet bond) for small repairs.\u003cbr\u003e\nHeat resistant to 130oC\u003cbr\u003e\nNon-flammable\u003cbr\u003e\nCoverage: 500mL tub covers 1 surface up to 2.5m2 depending on porosity\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhere can this product be used?\u003c\/strong\u003e\u003cbr\u003e\nBonding veneers of timber and laminated plastics, eg. Laminex and Formica to bench tops, table tops or other furniture.\u003cbr\u003e\nAreas where clamping or pressing facilities are either not available or difficult to use.\u003cbr\u003e\nPatching vinyl flooring\u003cbr\u003e\nReplacing a vinyl tile\u003cbr\u003e\nCork tiling\u003cbr\u003e\nLaying a vinyl floor\u003cbr\u003e\nLeather work eg handbags\u003cbr\u003e\nAdhering flexible or other material to Aluminium\u003cbr\u003e\nJoining, repairing holes in tents, car covers and other outdoor equipment\u003cbr\u003e\nReplacing lifting edges or laying lino\u003cbr\u003e\nAttaching rubbers to your fridge door\u003cbr\u003e\nBonding labels to tins\u003cbr\u003e\nRepairing your wetsuit\u003cbr\u003e\nCraft and scrapbooking projects (safe to use on Polystyrene)Areas where clamping or pressing facilities are either not available or difficult to use\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat materials is this product suitable for?\u003c\/strong\u003e\u003cbr\u003e\nFabric\u003cbr\u003e\nLaminated plastics\u003cbr\u003e\nVeneers\u003cbr\u003e\nHard board\u003cbr\u003e\nPolystyrene foam\u003cbr\u003e\nFibrous cement sheet\u003cbr\u003e\nAluminium\u003cbr\u003e\nPolyurethane foam\u003cbr\u003e\nRubber\u003cbr\u003e\nCork\u003cbr\u003e\nLeather\u003cbr\u003e\nCanvas\u003cbr\u003e\nFelt\u003cbr\u003e\nMetals\u003cbr\u003e\nMost plastics (Not recommended for bonding Polyethylene or Polypropylene Plastics, for these we recommend Plastics Glue )\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eHow to use this product\u003c\/strong\u003e\u003cbr\u003e\nGeneral bonding – use contact method or for small porous surfaces join with a wet bond by applying Kwik Grip Advanced to one surface only and immediately press together and lightly clamp.\u003cbr\u003e\nKwik Grip Advanced can be used as wet bond on absorbent surfaces such as timber, cardboard etc.\u003cbr\u003e\nContact bonding:\u003cbr\u003e\n1 Ensure surfaces to be bonded are clean, dry and free from dirt, grease, dust or particles.\u003cbr\u003e\n2 Using applicator provided with pack, completely cover both surfaces with adhesive and keep surfaces apart until the surface turns from white to clear – approx. 20 minutes. Tip: use dowels or something similar to keep surfaces apart\u003cbr\u003e\n3 Position the items carefully, still keeping surfaces apart. When edges are perfectly aligned, remove dowels and working from one edge press surfaces firmly together. Note: Grabs IMMEDIATELY on contact.\u003cbr\u003e\n4 Secure bond by running a roller over the bonded surfaces or by hammering the surface from the centre outwards using a padded block. Maximum Bond strength is achieved after 24 hours.\u003cbr\u003e\nNote: Drying time may be extended in cold and wet weather conditions. Wet bonding:\u003cbr\u003e\nEnsure surfaces to be bonded are clean, dry and free from dirt, grease, dust or particles.\u003cbr\u003e\nApply to one surface then bring surfaces together and clamp until dry.\u003cbr\u003e\nClean up application tools and excess adhesive with damp cloth \u0026amp; water before it dries.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eHandy tips\u003c\/strong\u003e\u003cbr\u003e\nWhat is a contact adhesive? A contact adhesive is an adhesive that must be applied to two surfaces and allowed to dry before surfaces are joined. Once surfaces are pushed together an instant bond forms. Therefore extended pressure or clamping is unnecessary (*Clamping of warped or curled surfaces may be required)\u003cbr\u003e\nBeing Low VOC\/low odour this product is much safer for use indoors than most other contact adhesives which tend to be solvent-based..\u003cbr\u003e\nCan be used on horizontal or vertical surfaces\u003cbr\u003e\nIn the event of prolonged open time, Kwik Grip Advanced will continue to give good contact bond for up to 8 hours.\u003cbr\u003e\nWhat does this mean? This means that once you have applied the adhesive, if you suddenly need to run out to the shops or go and do another job, you can safely come back within 8 hours and join the two surfaces for a great result! Many solvent-based contact adhesives have a much shorter open time limit.\u003c\/p\u003e\n","brand":"Selleys","offers":[{"title":"Default Title","offer_id":52323817423214,"sku":"GA9300697119230","price":13.11,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/files\/9300697119230_35a2258a-605a-4c06-8df4-68a26788ba50.jpg?v=1754715912"},{"product_id":"loctite-extreme-glue-no-drip-gel-crystal-clear-temperature-resistant","title":"Loctite Extreme Glue No Drip Gel Crystal Clear Temperature Resistant","description":"\u003cp\u003eLoctite Extreme Glue No Drip Gel contains a revolutionary Flextec formulation that fuses multiple materials together for a long-lasting bond.\u003c\/p\u003e\n\n\u003cp\u003eWhen a project or repair requires an adhesive with a higher viscosity and advanced resistance to extreme conditions, this liquid gel is your new go-to. This versatile, gap-filling glue seals and repairs nearly any surface, and it’s perfect for harsh conditions where constant flexing is a problem. Loctite Extreme Glue No Drip Gel dries clear and minimizes dripping for a clean, professional finish on any household project. It’s even dishwasher safe! Plus, our glue is durable enough to use outdoors because it cures quickly and is resistant to vibration, impact, moisture, UV exposure, and extreme temperatures.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eNo Drip Gel is great for vertical applications\u003c\/li\u003e\n\u003cli\u003eWithstands vibration, impact, moisture, and UV light\u003c\/li\u003e\n\u003cli\u003eStrong and durable for long-lasting results\u003c\/li\u003e\n\u003cli\u003eUse as an indoor or outdoor glue\u003c\/li\u003e\n\u003cli\u003eCrystal-clear formula for a clean, professional look\u003c\/li\u003e\n\u003cli\u003eWater-resistant and temperature-resistant from -58° to 248° F\u003c\/li\u003e\n\u003cli\u003eGap-filling gel for imperfect-fitting surfaces\u003c\/li\u003e\n\u003cli\u003eFlexible bond and precise grip\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Loctite","offers":[{"title":"Default Title","offer_id":52323818209646,"sku":"GA079340653559","price":11.86,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/files\/079340653559N_93068126-8c59-4744-9cd3-c5a1e7975d6c.jpg?v=1754715949"},{"product_id":"loctite-go2-gel-extra-strong-all-conditions-shock-water-and-temperature-resistant-18ml","title":"Loctite GO2 Gel Extra Strong All Conditions Shock, Water And Temperature Resistant 18ml","description":"\u003cp\u003e\u003cstrong\u003eLoctite Go2 Gel contains a revolutionary FLEXTEC® formulation that bonds multi-materials when projects or repairs require higher viscosity, tremendous bond strength, and resistance to extreme conditions. It is a versatile, gap-filling adhesive that bonds, seals and repairs almost all materials. It is ideal for bonds subject to harsh or extreme conditions or for situations where constant flexing is a problem. It can be used indoors and outdoors, has excellent adhesion and high initial grab that cures quickly. Loctite Go2 Gel dries clear and creates a flexible and durable bond which is dishwasher safe and has excellent resistance to vibration, impact, moisture, UV and extreme temperatures, offering long reliability anywhere it is used.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eRecommended For\u003c\/strong\u003e\u003cbr\u003e\nNOTE: 1See limitations below in the 'not recommended for' section.\u003cbr\u003e\nCompatible with many porous and non-porous materials such as metals1 (aluminum, stainless steel, steel, copper, brass, bronze, zinc, etc.), glass, concrete, ceramic, tiles, natural stones, wood, cork, paper, cardboard, textiles, leather, varnished surfaces1, chipboard, MDF, fiberglass reinforced polyester, rigid PVC, polycarbonate, sanded ABS, and polystyrene foam\/Styrofoam™.\u003cbr\u003e\nDIY repairs and modelling work in and around the house.\u003cbr\u003e\nNot Recommended For\u003cbr\u003e\nBefore application, carry out tests to ensure the compatibility with non-ferrous metals such as aluminium, copper, bronze and brass as well as with different coatings such as paints, varnishes and powder coatings. Variations in the composition may affect adhesion.\u003cbr\u003e\nAquariums or potable water systems\u003cbr\u003e\nArchival applications\u003cbr\u003e\nApplications requiring service temperatures below -58°F (-50°C) and above 248°F (120°C)\u003cbr\u003e\nPolyethylene (PE), polypropylene (PP) and polytetrafluoroethylene (PTFE) plastics, metal-to-metal (one surface should be porous) or rubber\u003cbr\u003e\nApplications requiring solvent resistance\u003cbr\u003e\nApplications with prolonged water immersion\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSafety Precautions\u003c\/strong\u003e\u003cbr\u003e\nWell-ventilated area, gloves.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003ePreparation\u003c\/strong\u003e\u003cbr\u003e\nUse between 41°F (5°C) and 104°F (40°C). Protect work area. Surfaces must be clean and free of grease, dust and other contaminants. For improved adhesion, abrade very smooth surfaces (such as metal) prior to cleaning. Remove cap.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003cbr\u003e\nApply a thin layer of adhesive to one surface. Immediately position and press parts firmly together within 5 minutes. For difficult bonds, clamp parts or use tape to hold pieces together. Do not move or use parts for at least 2 hours. Full bond strength is achieved in 24 hours. Cure times will increase with lower temperatures and humidity and if bonding two non-porous surfaces. \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFor Gap-Filling:\u003c\/strong\u003e\u003cbr\u003e\nApply in a thick layer to fill gaps up to 5mm max. Fix or clamp the items together for 1-3 hours and do not touch or move them. In 24 hours, 70% of full adhesion and bond strength is achieved. Cure time is 24 hours for every 2mm of adhesive. \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eTo Get High Initial Grip:\u003c\/strong\u003e\u003cbr\u003e\nApply on both surfaces in thin and even layers. Leave for 3-5 minutes. Use as a contact cement. After, GO2 gel has become tacky, bring the items together immediately and press firmly. Fixation is not necessary in many cases. Note that final strengths decrease when used as a contact glue. \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eTwo Non-Porous Surfaces:\u003c\/strong\u003e\u003cbr\u003e\nBonding two non-porous surfaces can result in a slower cure time and is generally not recommended. If bonding two non-porous surfaces, surfaces can be wetted using a damp cloth, taking care to avoid wetness, pooling water or drop formation, to optimize cure time.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCleanup\u003c\/strong\u003e\u003cbr\u003e\nClean tools and adhesive residue immediately with mineral spirits. Cured adhesive may be carefully cut away using a sharp-edged tool.\u003c\/p\u003e\n","brand":"Loctite","offers":[{"title":"Default Title","offer_id":52323818275182,"sku":"GA9313156006279","price":11.7,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/files\/9313156006279_3f6a09eb-cb46-4b0e-9824-b3a31a305cfd.jpg?v=1754712372"},{"product_id":"loctite-re-new-your-joins-easy-apply-mould-resistant-80ml","title":"Loctite Re-New Your Joins Easy Apply Mould Resistant 80ml","description":"\u003cp\u003eSealants as good as new in just one step, easy to apply in 5 minutes.\u003c\/p\u003e\n\n\u003cp\u003eIs the sealant in your bathroom mouldy, yellowish, cracked...? Damaged bathroom sealants can ruin the look of your bathroom. Today you can easily re-new with Loctite RE-NEW. There's no need to be an expert DIYer. You can get a great result thanks to its integrated smoothing tool and innovative silicone formula with anti-mould properties.\u003c\/p\u003e\n\n\u003cp\u003eRecomended on:Bathroom, shower and kitchen seals\u003c\/p\u003e\n\n\u003cp\u003eEasily applied over existing joins\u003cbr\u003e\nCovers discolourations and cracks\u003cbr\u003e\nWipes off easily if mistakes are made\u003cbr\u003e\nMould resistant\u003cbr\u003e\nReady to use in just 6 hour\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eHOW TO USE:\u003c\/strong\u003e\u003cbr\u003e\nSTEP 1: CLEAN THE DAMAGED SEALANT\u003c\/p\u003e\n\n\u003cp\u003eNo need to remove the existing sealant.\u003cbr\u003e\nClean the existing sealant with a damp cloth. Ensure sealant is dry before applying RE-NEW.\u003cbr\u003e\nIf the sealant is too mouldy, use a mould remover first.\u003c\/p\u003e\n\n\u003cp\u003eSTEP 2: APPLY RE-NEW\u003c\/p\u003e\n\n\u003cp\u003eApply RE-NEW on top of the existing sealant, holding the tube with the Loctite logo facing towards you.\u003cbr\u003e\nShake the tube to bring the RE-NEW content to the bottom.\u003cbr\u003e\nGently squeeze to apply RE-NEW. Squezeed too hard? Go over the sealant again without squeezing the tube.\u003c\/p\u003e\n\n\u003cp\u003eSTEP 3: RELAX: YOU CAN REPEAT\u003c\/p\u003e\n\n\u003cp\u003eWant to try again? Go over the sealant again without squeezing the tube or remove immediately using a damp cloth and start over.\u003cbr\u003e\nRemove excess sealant from surface or hands with a damp cloth.\u003c\/p\u003e\n\n\u003cp\u003eSTEP 4: THE PERFECTIONIST'S TOUCH\u003c\/p\u003e\n\n\u003cp\u003eGo over your RE-NEW without squeezing the tube. Thanks to the integrated smoothing tool, the sealant will be smoothed.\u003cbr\u003e\nGood adhesion to existing sealant including siliconeIce white in colour to cover every damaged sealant\u003c\/p\u003e\n\n\u003cp\u003eSTEP 5: TA-DA!\u003c\/p\u003e\n\n\u003cp\u003eClean the smoothing tool with water and a damp cloth.\u003cbr\u003e\nLet it dry for 6 hours before showering!\u003c\/p\u003e\n","brand":"Loctite","offers":[{"title":"Default Title","offer_id":52323818668398,"sku":"GA4015000437004","price":16.24,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/files\/4015000437004_7f55765e-f4e7-4334-b474-3ba64237bf5c.jpg?v=1754712353"},{"product_id":"monarch-mini-gap-filler-black","title":"Monarch Mini Gap Filler [Black]","description":"","brand":"Monarch","offers":[{"title":"Default Title","offer_id":52323819454830,"sku":"GA9320090030567","price":6.02,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/files\/9320090030567_dd3b7bac-a9e5-4986-9275-2bff35fb52de.jpg?v=1754712316"},{"product_id":"monarch-mini-gap-filler-brown","title":"Monarch Mini Gap Filler [Brown]","description":"","brand":"Monarch","offers":[{"title":"Default Title","offer_id":52323819487598,"sku":"GA9320090030574","price":6.02,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/files\/9320090030574_91b63521-91d4-427c-ba6f-c5f54343a9c6.jpg?v=1754712314"},{"product_id":"monarch-mini-gap-filler-cream","title":"Monarch Mini Gap Filler [Cream]","description":"","brand":"Monarch","offers":[{"title":"Default Title","offer_id":52323819520366,"sku":"GA9320090030581","price":6.02,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/files\/9320090030581_c5a95353-e7ee-4d92-8445-93066291f976.jpg?v=1754712313"},{"product_id":"monarch-mini-gap-filler-white","title":"Monarch Mini Gap Filler [White]","description":"","brand":"Monarch","offers":[{"title":"Default Title","offer_id":52323819553134,"sku":"GA9320090029080","price":2.84,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/files\/9320090029080_1b178ddb-e3de-4ec1-83bb-8e320595bdb3.jpg?v=1754712311"},{"product_id":"nordsjo-professional-super-filler-light-smooth-1lt-pot","title":"Nordsjo Professional Super Filler Light \u0026 Smooth 1lt Pot","description":"\u003cp\u003eNordsjö Professional Light and Smooth Super Filler, fills without the need for sanding. Thanks to our unique lightweight technology, our Light and Smooth filler immediately gives you a smooth finish. It does not sag and is easy to model, making it ideal for ceilings and walls.\u003c\/p\u003e\n\n\u003cp\u003eHigh performance extra lightweight filler for all general interior and exterior repairs\u003cbr\u003e\nFills deep cracks and holes up to 10cm in plasterboard, wood, fiber cement, concrete, brick and most other common building materials\u003cbr\u003e\nIdeal for over-head applications (non-slump formula)\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eProperties\u003c\/strong\u003e\u003cbr\u003e\nReady to use\u003cbr\u003e\nWill not shrink or sag\u003cbr\u003e\nSuper smooth finish – no sanding required\u003cbr\u003e\nPaintable with all types of paint\u003cbr\u003e\nMaximum layer thickness: 5 cm\u003cbr\u003e\nMaximum depth: 10 cm\u003cbr\u003e\nEasy to apply and shape\u003cbr\u003e\nQuick drying: paint after approx. 2 hours (5 cm layer at 20°C) with water-based paints\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eHow to apply\u003c\/strong\u003e\u003cbr\u003e\nSubstrate must be clean, dry, dust and grease free.\u003cbr\u003e\nRemove all loose materials.\u003cbr\u003e\nBefore application, metal surfaces such as nails and screws should be treated with an appropriate rust resistant primer.\u003cbr\u003e\nStir into a smooth paste (if the filler is too dry, just add a few drops of water).\u003cbr\u003e\nPress filler into hole with a filling knife, smoothing off with a wet filling knife.\u003cbr\u003e\nFor holes deeper than 5 cm, apply in layers, with sufficient drying time between the layers.\u003cbr\u003e\nNo sanding is required. If sanding, wait for 24 hours.\u003cbr\u003e\nIf painting over with an oil-based finish, wait 14 days.\u003cbr\u003e\nMust be painted over when used outside (minimum 2 coats).\u003cbr\u003e\nColour: White.\u003cbr\u003e\nNot suitable for drilling.\u003cbr\u003e\nClean tools and hands immediately after use with warm water.\u003cbr\u003e\nDo not store or use below 5 ° C.\u003c\/p\u003e\n","brand":"Nordsjo","offers":[{"title":"Default Title","offer_id":52323820306798,"sku":"GA8710839114565","price":33.35,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/files\/8710839114565_5a3cc1bf-e9e7-4306-af0f-0736ba142369.jpg?v=1754712284"},{"product_id":"nordsjo-professional-super-filler-light-smooth-200ml-tube","title":"Nordsjo Professional Super Filler Light \u0026 Smooth 200ml Tube","description":"\u003cp\u003eNordsjö Professional Light and Smooth Super Filler, fills without the need for sanding. Thanks to our unique lightweight technology, our Light and Smooth filler immediately gives you a smooth finish. It does not sag and is easy to model, making it ideal for ceilings and walls.\u003c\/p\u003e\n\n\u003cp\u003eHigh performance extra lightweight filler for all general interior and exterior repairs\u003cbr\u003e\nFills deep cracks and holes up to 10cm in plasterboard, wood, fiber cement, concrete, brick and most other common building materials\u003cbr\u003e\nIdeal for over-head applications (non-slump formula)\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eProperties\u003c\/strong\u003e\u003cbr\u003e\nReady to use\u003cbr\u003e\nWill not shrink or sag\u003cbr\u003e\nSuper smooth finish – no sanding required\u003cbr\u003e\nPaintable with all types of paint\u003cbr\u003e\nMaximum layer thickness: 5 cm\u003cbr\u003e\nMaximum depth: 10 cm\u003cbr\u003e\nEasy to apply and shape\u003cbr\u003e\nQuick drying: paint after approx. 2 hours (5 cm layer at 20°C) with water-based paints\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eHow to apply\u003c\/strong\u003e\u003cbr\u003e\nSubstrate must be clean, dry, dust and grease free.\u003cbr\u003e\nRemove all loose materials.\u003cbr\u003e\nBefore application, metal surfaces such as nails and screws should be treated with an appropriate rust resistant primer.\u003cbr\u003e\nStir into a smooth paste (if the filler is too dry, just add a few drops of water).\u003cbr\u003e\nPress filler into hole with a filling knife, smoothing off with a wet filling knife.\u003cbr\u003e\nFor holes deeper than 5 cm, apply in layers, with sufficient drying time between the layers.\u003cbr\u003e\nNo sanding is required. If sanding, wait for 24 hours.\u003cbr\u003e\nIf painting over with an oil-based finish, wait 14 days.\u003cbr\u003e\nMust be painted over when used outside (minimum 2 coats).\u003cbr\u003e\nColour: White.\u003cbr\u003e\nNot suitable for drilling.\u003cbr\u003e\nClean tools and hands immediately after use with warm water.\u003cbr\u003e\nDo not store or use below 5 ° C.\u003c\/p\u003e\n","brand":"Nordsjo","offers":[{"title":"Default Title","offer_id":52323820339566,"sku":"GA8710839114541","price":12.9,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/files\/8710839114541_02d3d459-fedf-4cf4-adb4-bdf25a7d0e41.jpg?v=1754712282"},{"product_id":"nordsjo-professional-super-filler-light-smooth-300ml-pot","title":"Nordsjo Professional Super Filler Light \u0026 Smooth 300ml Pot","description":"\u003cp\u003eNordsjö Professional Light and Smooth Super Filler, fills without the need for sanding. Thanks to our unique lightweight technology, our Light and Smooth filler immediately gives you a smooth finish. It does not sag and is easy to model, making it ideal for ceilings and walls.\u003c\/p\u003e\n\n\u003cp\u003eHigh performance extra lightweight filler for all general interior and exterior repairs\u003cbr\u003e\nFills deep cracks and holes up to 10cm in plasterboard, wood, fiber cement, concrete, brick and most other common building materials\u003cbr\u003e\nIdeal for over-head applications (non-slump formula)\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eProperties\u003c\/strong\u003e\u003cbr\u003e\nReady to use\u003cbr\u003e\nWill not shrink or sag\u003cbr\u003e\nSuper smooth finish – no sanding required\u003cbr\u003e\nPaintable with all types of paint\u003cbr\u003e\nMaximum layer thickness: 5 cm\u003cbr\u003e\nMaximum depth: 10 cm\u003cbr\u003e\nEasy to apply and shape\u003cbr\u003e\nQuick drying: paint after approx. 2 hours (5 cm layer at 20°C) with water-based paints\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eHow to apply\u003c\/strong\u003e\u003cbr\u003e\nSubstrate must be clean, dry, dust and grease free.\u003cbr\u003e\nRemove all loose materials.\u003cbr\u003e\nBefore application, metal surfaces such as nails and screws should be treated with an appropriate rust resistant primer.\u003cbr\u003e\nStir into a smooth paste (if the filler is too dry, just add a few drops of water).\u003cbr\u003e\nPress filler into hole with a filling knife, smoothing off with a wet filling knife.\u003cbr\u003e\nFor holes deeper than 5 cm, apply in layers, with sufficient drying time between the layers.\u003cbr\u003e\nNo sanding is required. If sanding, wait for 24 hours.\u003cbr\u003e\nIf painting over with an oil-based finish, wait 14 days.\u003cbr\u003e\nMust be painted over when used outside (minimum 2 coats).\u003cbr\u003e\nColour: White.\u003cbr\u003e\nNot suitable for drilling.\u003cbr\u003e\nClean tools and hands immediately after use with warm water.\u003cbr\u003e\nDo not store or use below 5 ° C.\u003c\/p\u003e\n","brand":"Nordsjo","offers":[{"title":"Default Title","offer_id":52323820372334,"sku":"GA8710839114558","price":15.9,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/files\/8710839114558_575df2e5-becf-493d-ab3a-86f26a91d502.png?v=1754712281"},{"product_id":"nordsjo-professional-universal-fine-filler-1lt-tub","title":"Nordsjo Professional Universal Fine Filler 1lt Tub","description":"\u003cp\u003eNordsjö Professional Fine Filler is an indoor super smooth filler for primed new wood or previously painted clean wooden surfaces and or concrete walls and ceilings. It is ideal for fixing minor imperfections on painted surfaces before repainting. On wood, it is ideal for cracks and joints.\u003c\/p\u003e\n\n\u003cp\u003eFor use on interior walls and joinery, including doors, windows, trim, architraves and skirting boards\u003cbr\u003e\nFill fine cracks up to 2mm, minor blemishes or wood grain for a professional, glass smooth surface for painting\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eProperties\u003c\/strong\u003e\u003cbr\u003e\nReady to use\u003cbr\u003e\nSand \u0026amp; paint after 4 hours\u003cbr\u003e\nSuper smooth white finish\u003cbr\u003e\nEasy to sand\u003cbr\u003e\nMaximum depth: 2 mm\u003cbr\u003e\nParticle size: Max 0.10 mm\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eHow to apply\u003c\/strong\u003e\u003cbr\u003e\nSubstrate and crack must be clean, dry and free from loose material.\u003cbr\u003e\nNew wood should be primed first.\u003cbr\u003e\nRub down gloss surfaces for improved adhesion.\u003cbr\u003e\nMetal surfaces such as nails and screws should be treated with an appropriate rust resistant primer.\u003cbr\u003e\nApply with a filling knife and spread over the surface, pressing in well.\u003cbr\u003e\nRemove any excess filler and leave to dry.\u003cbr\u003e\nFor an even smoother finish rub down with fine sand paper.\u003cbr\u003e\nUse appropriate protection when sanding.\u003cbr\u003e\nDo not apply when the surface temperature is below + 5°C.\u003cbr\u003e\nReplace lid after use.\u003cbr\u003e\nWash tools with warm water.\u003c\/p\u003e\n","brand":"Nordsjo","offers":[{"title":"Default Title","offer_id":52323820405102,"sku":"GA8710839114640","price":31.11,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/files\/8710839114640_6fb1c46f-2f8a-4f5b-9e4a-e7db3fda53fd.jpg?v=1754712280"},{"product_id":"nordsjo-professional-universal-fine-filler-2-5lt-bucket","title":"Nordsjo Professional Universal Fine Filler 2.5lt Bucket","description":"\u003cp\u003eNordsjö Professional Fine Filler is an indoor super smooth filler for primed new wood or previously painted clean wooden surfaces and or concrete walls and ceilings. It is ideal for fixing minor imperfections on painted surfaces before repainting. On wood, it is ideal for cracks and joints.\u003c\/p\u003e\n\n\u003cp\u003eFor use on interior walls and joinery, including doors, windows, trim, architraves and skirting boards\u003cbr\u003e\nFill fine cracks up to 2mm, minor blemishes or wood grain for a professional, glass smooth surface for painting\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eProperties\u003c\/strong\u003e\u003cbr\u003e\nReady to use\u003cbr\u003e\nSand \u0026amp; paint after 4 hours\u003cbr\u003e\nSuper smooth white finish\u003cbr\u003e\nEasy to sand\u003cbr\u003e\nMaximum depth: 2 mm\u003cbr\u003e\nParticle size: Max 0.10 mm\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eHow to apply\u003c\/strong\u003e\u003cbr\u003e\nSubstrate and crack must be clean, dry and free from loose material.\u003cbr\u003e\nNew wood should be primed first.\u003cbr\u003e\nRub down gloss surfaces for improved adhesion.\u003cbr\u003e\nMetal surfaces such as nails and screws should be treated with an appropriate rust resistant primer.\u003cbr\u003e\nApply with a filling knife and spread over the surface, pressing in well.\u003cbr\u003e\nRemove any excess filler and leave to dry.\u003cbr\u003e\nFor an even smoother finish rub down with fine sand paper.\u003cbr\u003e\nUse appropriate protection when sanding.\u003cbr\u003e\nDo not apply when the surface temperature is below + 5°C.\u003cbr\u003e\nReplace lid after use.\u003cbr\u003e\nWash tools with warm water.\u003c\/p\u003e\n","brand":"Nordsjo","offers":[{"title":"Default Title","offer_id":52323820437870,"sku":"GA8710839114657","price":59.9,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/files\/8710839114657_efedaead-fc59-4ffe-bf8f-95cac4070f0d.png?v=1754712278"},{"product_id":"nordsjo-professional-universal-fine-filler-330gr-tube","title":"Nordsjo Professional Universal Fine Filler 330gr Tube","description":"\u003cp\u003eNordsjö Professional Fine Filler is an indoor super smooth filler for primed new wood or previously painted clean wooden surfaces and or concrete walls and ceilings. It is ideal for fixing minor imperfections on painted surfaces before repainting. On wood, it is ideal for cracks and joints.\u003c\/p\u003e\n\n\u003cp\u003eFor use on interior walls and joinery, including doors, windows, trim, architraves and skirting boards\u003cbr\u003e\nFill fine cracks up to 2mm, minor blemishes or wood grain for a professional, glass smooth surface for painting\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eProperties\u003c\/strong\u003e\u003cbr\u003e\nReady to use\u003cbr\u003e\nSand \u0026amp; paint after 4 hours\u003cbr\u003e\nSuper smooth white finish\u003cbr\u003e\nEasy to sand\u003cbr\u003e\nMaximum depth: 2 mm\u003cbr\u003e\nParticle size: Max 0.10 mm\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eHow to apply\u003c\/strong\u003e\u003cbr\u003e\nSubstrate and crack must be clean, dry and free from loose material.\u003cbr\u003e\nNew wood should be primed first.\u003cbr\u003e\nRub down gloss surfaces for improved adhesion.\u003cbr\u003e\nMetal surfaces such as nails and screws should be treated with an appropriate rust resistant primer.\u003cbr\u003e\nApply with a filling knife and spread over the surface, pressing in well.\u003cbr\u003e\nRemove any excess filler and leave to dry.\u003cbr\u003e\nFor an even smoother finish rub down with fine sand paper.\u003cbr\u003e\nUse appropriate protection when sanding.\u003cbr\u003e\nDo not apply when the surface temperature is below + 5°C.\u003cbr\u003e\nReplace lid after use.\u003cbr\u003e\nWash tools with warm water.\u003c\/p\u003e\n","brand":"Nordsjo","offers":[{"title":"Default Title","offer_id":52323820470638,"sku":"GA8710839114633","price":13.9,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/files\/8710839114633_fc63c946-827d-49b6-96e4-ebb11cbf2de7.png?v=1754712276"},{"product_id":"parfix-gap-filler-flexible-paintable-interior-white","title":"Parfix Gap Filler Flexible Paintable Interior [White]","description":"\u003cp\u003ePaintable\u003cbr\u003e\nFlexible\u003cbr\u003e\nDurable\u003cbr\u003e\nParfix Gap Filler is a multi-purpose flexible filler that is suitable for interior applications such as skirting and architraves, door and window frames.\u003c\/p\u003e\n","brand":"Parfix","offers":[{"title":"Default Title","offer_id":52323820732782,"sku":"GA9300697115812","price":3.65,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/files\/9300697115812_e966678a-f2ee-4e79-abc6-2f960851c302.png?v=1754712264"},{"product_id":"parfix-multipurpose-filler-ready-mixed-sandable-paintable-1kg","title":"Parfix Multipurpose Filler Ready Mixed Sandable Paintable 1Kg","description":"\u003cp\u003eSandable\u003cbr\u003e\nPaintable\u003cbr\u003e\nReady mixed\u003cbr\u003e\nWeather resistant\u003cbr\u003e\nParfix multipurpose filler is a versatile, ready mixed filler ideal for filling cracks, holes and gaps inside and outside the home.\u003c\/p\u003e\n\n\u003cp\u003eSandable and paintable, it enables a smooth finish.\u003c\/p\u003e\n","brand":"Parfix","offers":[{"title":"Default Title","offer_id":52323820962158,"sku":"GA9300697123367","price":24.94,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/files\/9300697123367_0c22a68a-3eda-4500-a00d-c8c2271035d8.jpg?v=1754712253"},{"product_id":"parfix-multipurpose-filler-ready-mixed-sandable-paintable-500g","title":"Parfix Multipurpose Filler Ready Mixed Sandable Paintable 500g","description":"\u003cp\u003eSandable\u003cbr\u003e\nPaintable\u003cbr\u003e\nReady mixed\u003cbr\u003e\nWeather resistant\u003cbr\u003e\nParfix multipurpose filler is a versatile, ready mixed filler ideal for filling cracks, holes and gaps inside and outside the home.\u003c\/p\u003e\n\n\u003cp\u003eSandable and paintable, it enables a smooth finish.\u003c\/p\u003e\n","brand":"Parfix","offers":[{"title":"Default Title","offer_id":52323820994926,"sku":"GA9300697123350","price":14.41,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/files\/9300697123350_a623ae90-f2d5-46a7-8cfe-c77af4bc0362.jpg?v=1754712252"},{"product_id":"poly-coloured-gap-filler-acrylic-sealant-int-ext-black","title":"Poly Coloured Gap Filler Acrylic Sealant Int \u0026 Ext [Black]","description":"","brand":"Poly","offers":[{"title":"Default Title","offer_id":52323823452526,"sku":"GA9311531002724","price":11.94,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/files\/9311531002724_6b56cb9d-718d-4289-8566-b1965f6372f4.webp?v=1754712217"},{"product_id":"poly-coloured-gap-filler-acrylic-sealant-int-ext-brown","title":"Poly Coloured Gap Filler Acrylic Sealant Int \u0026 Ext [Brown]","description":"","brand":"Poly","offers":[{"title":"Default Title","offer_id":52323823485294,"sku":"GA9311531002748","price":11.94,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/files\/9311531002748_2d1b3546-774e-4ede-96e6-fc71fb1dea46.jpg?v=1754712216"},{"product_id":"poly-coloured-gap-filler-acrylic-sealant-int-ext-cedar","title":"Poly Coloured Gap Filler Acrylic Sealant Int \u0026 Ext [Cedar]","description":"","brand":"Poly","offers":[{"title":"Default Title","offer_id":52323823518062,"sku":"GA9311531002731","price":11.94,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/files\/9311531002731_8a23516e-dc7a-4a74-9fda-5436c7c62091.jpg?v=1754712214"},{"product_id":"poly-coloured-gap-filler-acrylic-sealant-int-ext-dark-grey","title":"Poly Coloured Gap Filler Acrylic Sealant Int \u0026 Ext [Dark Grey]","description":"","brand":"Poly","offers":[{"title":"Default Title","offer_id":52323823550830,"sku":"GA9311531002755","price":11.94,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/files\/9311531002755_7e96b58b-9c4a-4693-8cc9-b65123aa898d.jpg?v=1754712213"},{"product_id":"poly-coloured-gap-filler-acrylic-sealant-int-ext-light-grey","title":"Poly Coloured Gap Filler Acrylic Sealant Int \u0026 Ext [Light Grey]","description":"","brand":"Poly","offers":[{"title":"Default Title","offer_id":52323823583598,"sku":"GA9311531002762","price":11.94,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/files\/9311531002762_be7a4237-355f-47f3-ae09-dabb40913652.png?v=1754712211"},{"product_id":"poly-coloured-gap-filler-acrylic-sealant-int-ext-vanilla","title":"Poly Coloured Gap Filler Acrylic Sealant Int \u0026 Ext [Vanilla]","description":"","brand":"Poly","offers":[{"title":"Default Title","offer_id":52323823616366,"sku":"GA9311531002779","price":11.94,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/files\/9311531002779_4cf84f13-11fd-4024-84f3-8b146caa7d2b.png?v=1754712210"},{"product_id":"poly-gap-filler-sealant-multipurpose-white","title":"Poly Gap Filler Sealant Multipurpose [White]","description":"\u003cp\u003e\u003cstrong\u003eA flexible multipurpose gap filler, to fill gaps around cornice, wall joints, skirting board, window and door frames where where movement causes ordinary fillers to crack or fall out.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eFor use on: Wood, brick, aluminium, glass, plasterboard, ceramic\u003cbr\u003e\ntiles and painted surfaces (INTERIOR \u0026amp; EXTERIOR)\u003cbr\u003e\nCoverage: 30m\/3mm bead.\u003cbr\u003e\nDry time: Skins in 30 minutes at 25°C. Full cure in 7days.\u003cbr\u003e\nReady to use: YES\u003cbr\u003e\nAvailable in: 475g\u003cbr\u003e\nColour: White\u003c\/p\u003e\n\n\u003cp\u003eNOTE: Not for fine joints between tongue and groove boards or weatherboard overlaps.\u003c\/p\u003e\n\n\u003cp\u003e• Ensure surfaces are clean, dry and free from oil, dust, grease, flaking paint and old sealant.\u003cbr\u003e\n• Using caulking gun, push sealant ahead of nozzle forcing it onto the surface and into the joint. Ensure the sealant is touching both sides of the gap.\u003cbr\u003e\n• Smooth with wet finger or knife and remove excess sealant immediately with a damp cloth.\u003cbr\u003e\n• Allow sealant to skin approx 30 min before painting with water-based paints.\u003cbr\u003e\n• Allow to set for 48 hours if using oil based paint or if joint is large.\u003cbr\u003e\n• Some water-based undercoats and flat paints may crack on drying. Test a small section of sealant. Paint cracking may be reduced by using a vinyl\/ acrylic semi glossed paint or oil based undercoats first, or by allowing the sealant to cure thoroughly before painting.\u003cbr\u003e\n• Do not use outside if rain is imminent, not for contantly damp areas.\u003cbr\u003e\n• Painting improves exterior durability.\u003cbr\u003e\n• Use Poly silicone sealants for a watertight seal or where movement is excessive.\u003cbr\u003e\n• Water clean up\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eQ. How do I fill gaps between my wooden window frames and inside wall?\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eA. You're dealing with two different materials here, plaster and wood. To allow for differential movement between them, use Polyfilla Gap Filler, wiping off any excess with a damp cloth.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eQ. I painted over the areas where I used Polyfilla Gap Filler and now cracks have appeared. Why has this happened?\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eA. If the gap filler was not cured sufficiently before it was painted over, cracks can occur as the gap filler shrinks. To prevent this, allow 48 hours drying time when you are filling large gaps or painting with oil-based paints. Also, some water based undercoats and paints shrink during drying and as Polyfilla Gap Filler is flexible, it won't stop cracks appearing in the shrinking paint on its surface. Test the paint on a small section of gap filler and if this is a problem you can reduce cracking by allowing the filler to cure thoroughly or by first coating it with a vinyl\/acrylic semi-gloss or oil-based undercoat.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eQ. Why does my gap filler keeps cracking?\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eA. It is important to remember that the width of a gap affects how much the product can move. Fine cracks less than 2mm allow the gap filler to move only very tiny amounts before it may crack again. It is best to ensure that you have at least 3mm worth of product so you can maximise the movement capability of your joint.\u003c\/p\u003e\n","brand":"Poly","offers":[{"title":"Default Title","offer_id":52323823649134,"sku":"GA9311531000683","price":5.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/files\/9311531000683_aaee7eb0-0b5d-4d11-8699-1eea1db48c2c.png?v=1754712208"},{"product_id":"poly-multipurpose-interior-powder-filler-1kg","title":"Poly Multipurpose Interior Powder Filler 1Kg","description":"\u003cp\u003e\u003cstrong\u003eA cellulose reinforced plaster-based filler for filling interior cracks and holes that won't shrink.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eFor use on: Plasterboard, brick, masonry \u0026amp; wood. Can be used also for modelling \u0026amp; sculpting (INTERIOR)\u003cbr\u003e\nFill depth: Dependent on mix ratio\u003cbr\u003e\nDries in: 2-3 hours\u003cbr\u003e\nReady to use: NO (mix with water)\u003cbr\u003e\nAvailable in: 500g, 1kg, 2kg \u0026amp; 6kg\u003cbr\u003e\nColour: Off-white\u003c\/p\u003e\n\n\u003cp\u003e• Surface to be filled should be clean and dry with no loose or powdery material. Roughen glossy surfaces to provide a key.\u003cbr\u003e\n• Ensure tools and mixing vessels are clean, as dried residue filler will  accelerate drying rate.\u003cbr\u003e\n• Add 2.5 parts Polyfilla Interior Powder Filler to 1 part tap water and mix thoroughly into a paste with a clean knife. Once mixed, filler should be used within 1 hour. For deep cracks and holes it is advisable to use a slightly stiffer (less water) mix.\u003cbr\u003e\n• Use a clothes peg to reseal the pack.\u003cbr\u003e\n• Using a filling knife or applicator, press the mixed filler into the crack and smooth off. Slightly overfill and allow to dry before sanding. Use medium grade sandpaper and dust off. Wipe the dusted surface with a damp sponge.\u003cbr\u003e\n• Leave for 2-3 hours before sanding and decorating.\u003cbr\u003e\n• For best results prime repaired surface with paint undercoat paint or sealer prior to repainting the whole area.\u003cbr\u003e\n• Clean up with water before filler dries\u003c\/p\u003e\n","brand":"Poly","offers":[{"title":"Default Title","offer_id":52323823747438,"sku":"GA9310168100711","price":28.08,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/files\/9310168100711_1be07da6-3800-48f9-8784-319944a22437.jpg?v=1754712204"},{"product_id":"poly-multipurpose-interior-powder-filler-2kg","title":"Poly Multipurpose Interior Powder Filler 2Kg","description":"\u003cp\u003e\u003cstrong\u003eA cellulose reinforced plaster-based filler for filling interior cracks and holes that won't shrink.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eFor use on: Plasterboard, brick, masonry \u0026amp; wood. Can be used also for modelling \u0026amp; sculpting (INTERIOR)\u003cbr\u003e\nFill depth: Dependent on mix ratio\u003cbr\u003e\nDries in: 2-3 hours\u003cbr\u003e\nReady to use: NO (mix with water)\u003cbr\u003e\nAvailable in: 500g, 1kg, 2kg \u0026amp; 6kg\u003cbr\u003e\nColour: Off-white\u003c\/p\u003e\n\n\u003cp\u003e• Surface to be filled should be clean and dry with no loose or powdery material. Roughen glossy surfaces to provide a key.\u003cbr\u003e\n• Ensure tools and mixing vessels are clean, as dried residue filler will  accelerate drying rate.\u003cbr\u003e\n• Add 2.5 parts Polyfilla Interior Powder Filler to 1 part tap water and mix thoroughly into a paste with a clean knife. Once mixed, filler should be used within 1 hour. For deep cracks and holes it is advisable to use a slightly stiffer (less water) mix.\u003cbr\u003e\n• Use a clothes peg to reseal the pack.\u003cbr\u003e\n• Using a filling knife or applicator, press the mixed filler into the crack and smooth off. Slightly overfill and allow to dry before sanding. Use medium grade sandpaper and dust off. Wipe the dusted surface with a damp sponge.\u003cbr\u003e\n• Leave for 2-3 hours before sanding and decorating.\u003cbr\u003e\n• For best results prime repaired surface with paint undercoat paint or sealer prior to repainting the whole area.\u003cbr\u003e\n• Clean up with water before filler dries\u003c\/p\u003e\n","brand":"Poly","offers":[{"title":"Default Title","offer_id":52323823780206,"sku":"GA93101681","price":46.15,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/files\/93101681_8deca3e5-b849-46f6-b64e-c2af9b52bd52.jpg?v=1754712202"},{"product_id":"poly-multipurpose-interior-powder-filler-500g","title":"Poly Multipurpose Interior Powder Filler 500g","description":"\u003cp\u003e\u003cstrong\u003eA cellulose reinforced plaster-based filler for filling interior cracks and holes that won't shrink.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eFor use on: Plasterboard, brick, masonry \u0026amp; wood. Can be used also for modelling \u0026amp; sculpting (INTERIOR)\u003cbr\u003e\nFill depth: Dependent on mix ratio\u003cbr\u003e\nDries in: 2-3 hours\u003cbr\u003e\nReady to use: NO (mix with water)\u003cbr\u003e\nAvailable in: 500g, 1kg, 2kg \u0026amp; 6kg\u003cbr\u003e\nColour: Off-white\u003c\/p\u003e\n\n\u003cp\u003e• Surface to be filled should be clean and dry with no loose or powdery material. Roughen glossy surfaces to provide a key.\u003cbr\u003e\n• Ensure tools and mixing vessels are clean, as dried residue filler will  accelerate drying rate.\u003cbr\u003e\n• Add 2.5 parts Polyfilla Interior Powder Filler to 1 part tap water and mix thoroughly into a paste with a clean knife. Once mixed, filler should be used within 1 hour. For deep cracks and holes it is advisable to use a slightly stiffer (less water) mix.\u003cbr\u003e\n• Use a clothes peg to reseal the pack.\u003cbr\u003e\n• Using a filling knife or applicator, press the mixed filler into the crack and smooth off. Slightly overfill and allow to dry before sanding. Use medium grade sandpaper and dust off. Wipe the dusted surface with a damp sponge.\u003cbr\u003e\n• Leave for 2-3 hours before sanding and decorating.\u003cbr\u003e\n• For best results prime repaired surface with paint undercoat paint or sealer prior to repainting the whole area.\u003cbr\u003e\n• Clean up with water before filler dries\u003c\/p\u003e\n","brand":"Poly","offers":[{"title":"Default Title","offer_id":52323823812974,"sku":"GA9310168100612","price":23.38,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/files\/9310168100612_620ee40d-b54f-43dd-ac15-5b7be0e6424b.jpg?v=1754712201"},{"product_id":"poly-sandable-gap-filler-sealant-white","title":"Poly Sandable Gap Filler Sealant [White]","description":"\u003cp\u003eAchieving a super smooth finish along gap filled joints is no longer reliant on caulking technique and experience. Polyfilla Sandable Gap Filler is a flexible gap filler which can be sanded. It's the perfect product to fix potential painting issues or unsightly gap bulges later in your project.\u003c\/p\u003e\n\n\u003cp\u003eEasy to sand\u003cbr\u003e\nFlexible\u003cbr\u003e\nPaintable\u003cbr\u003e\nCan be used both indoors and outdoors\u003c\/p\u003e\n","brand":"Poly","offers":[{"title":"Default Title","offer_id":52323823878510,"sku":"GA9311531002519","price":9.59,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/files\/9311531002519_39812258-b0e2-4865-b7e0-1b0e830ecab2.jpg?v=1754712198"},{"product_id":"polyfilla-crack-filler-bathroom-kitchen-moisture-mold-resistant-330ml","title":"Polyfilla Crack Filler Bathroom \u0026 Kitchen Moisture Mold Resistant 330ml","description":"\u003cp\u003e\u003cstrong\u003eMoisture and mould resistant, this product has been specially formulated for filling cracks, holes and chips in wet areas of the home.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eEasy to sand, sets to a super hard finish and is highly crack resistant.\u003c\/p\u003e\n\n\u003cp\u003eFilling blade included\u003c\/p\u003e\n\n\u003cp\u003eFor use on Plasterboard, masonry, wood, concrete, mortar \u0026amp; cement board (INTERIOR)\u003cbr\u003e\nFill depth: Up to 10mm\u003cbr\u003e\nDries in: 3 hours\u003cbr\u003e\nReady to use: YES\u003cbr\u003e\nAvailable in: 330mL \u0026amp; 770mL\u003cbr\u003e\nColour: White\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eApplication Tips\u003c\/strong\u003e\u003cbr\u003e\n• Surface to be filled should be clean and dry with no loose or powdery material. Mould affected areas should be thoroughly cleaned with a suitable mould remover, rinsed and allowed to dry.\u003cbr\u003e\n• Using the attached filling blade press filler in firmly and remove excess.\u003cbr\u003e\n• Allow drying (2-3 hours in thin 2-3mm applications depending on humidity), before sanding.\u003cbr\u003e\n• For deeper jobs apply in 10mm layers, allowing each layer to set, before applying the next layer. Allow longer drying times (24 hours minimum) if painting with oil-based paints or for deeper applications.\u003cbr\u003e\n• Finish off sanding with a fine sandpaper (\u0026gt;300 grit) for a smoother finish.\u003cbr\u003e\n• For best results, apply paint undercoat before applying paint topcoat suitable for bathrooms and kitchens, to maximise water, moisture and mould resistance.\u003cbr\u003e\n• Not for areas that will be immersed in water.\u003cbr\u003e\n• Use a flexible Poly sealant where joint movement occurs.\u003cbr\u003e\n• Clean up with water before filler dries.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFAQ's\u003c\/strong\u003e\u003cbr\u003e\n\u003cstrong\u003eQ. Should I use a different filler in damp areas?\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eA. Yes. Polyfilla Bathroom \u0026amp; Kitchen has been specially formulated to resist water, moisture and mould growth making it perfect for use in damp areas of the home.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eHOW TO PREPARE A BATHROOM OR KITCHEN FOR PAINTING\u003c\/strong\u003e\u003cbr\u003e\nThe key to achieving a flawless paint finish is preparation. A fresh coat of paint can often accentuate imperfections on plaster walls so it's important that small cracks, dents and chips are properly filled and sanded to create a smooth, even surface for a picture-perfect finish. In areas affected by moisture such as bathrooms, kitchens and laundries we recommend using products specially designed to resist mould growth.   \u003c\/p\u003e\n\n\u003cp\u003eBefore starting on your walls, it's a good idea to clear your bathroom or kitchen of accessories and appliances. Use good quality drop sheets to avoid getting paint and dust on benchtops, sinks and floor surfaces. \u003c\/p\u003e\n\n\u003cp\u003eYou'll need:\u003c\/p\u003e\n\n\u003cp\u003ePoly Sugar Soap\u003cbr\u003e\nPolyfilla Bathroom \u0026amp; Kitchen\u003cbr\u003e\nA flexible filling blade \u003cbr\u003e\nFine sandpaper\u003cbr\u003e\nA soft brush\u003cbr\u003e\nPainters tape\u003c\/p\u003e\n\n\u003cp\u003eEnsure your walls have no remaining nails, pins, etc. With fine sandpaper, remove lumps, bumps and any paint flakes. Brush off excess dust and then wash down the walls thoroughly with Poly Sugar Soap to remove mould, grease and grime. Let the sugar soap dry completely before filling. \u003cbr\u003e\nApply a small amount of Polyfilla Bathroom \u0026amp; Kitchen to your filling blade and draw it across each imperfection on the wall. For larger areas, a trowel should be used.\u003cbr\u003e\nUsing the filling blade, remove excess and skim the filled areas lightly in both directions a few times to ensure a no air bubbles are present in the filled space. Feathering the edges will also minimise sanding. Finish by drawing down with firm pressure. \u003cbr\u003e\nWait until the application has dried (2-3 hours for thin 2-3mm applications depending on humidity), then lightly sand the filled areas to an even finish.\u003cbr\u003e\nRemove dust with a soft brush. Allow longer drying times for deeper applications or if painting with oil-based paints (24 hours minimum). There is no need to use water or sugar soap to clean dry filled surfaces prior to painting.\u003cbr\u003e\nFor deeper jobs, apply in 10mm layers allowing each layer to set before applying the next layer.   \u003cbr\u003e\nTaping\u003cbr\u003e\nInvest in a good painterís tape and carefully tape off any skirting, architraves, woodwork, etc. As you apply it, gently rub across the edge of the tape that will be painted to help prevent any paint from seeping underneath\u003c\/p\u003e\n\n\u003cp\u003eNow you've created a smooth, blemish-free surface, youíre ready to paint and achieve a perfect finish! For best results, apply paint undercoat before applying your top coat.\u003c\/p\u003e\n","brand":"Poly","offers":[{"title":"Default Title","offer_id":52323824009582,"sku":"GA93697057","price":18.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/files\/93697057_7e22f43e-3434-4cbf-b04d-f25c198cb890.png?v=1754712195"},{"product_id":"polyfilla-f20-gap-filler-high-flexibility-superior-durability-smooth-finish-for-interior-exterior-gaps-with-up-to-20-joint-movement","title":"Polyfilla F20 Gap Filler - High Flexibility, Superior Durability \u0026 Smooth Finish for Interior \u0026 Exterior Gaps with Up to 20% Joint Movement","description":"\u003ctitle\u003e\u003c\/title\u003e\n\u003ch1\u003ePolyfilla F20 Gap Filler: The Ultimate Gap Solution for High-Stress Applications\u003c\/h1\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003eHighly Durable\u003c\/li\u003e\n\u003cli\u003eHigh Flexibility\u003c\/li\u003e\n\u003cli\u003eSmooth Finish\u003c\/li\u003e\n\u003cli\u003e+\/- 20% Joint Movement Capability\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\n\u003cp\u003ePolyfilla F20 Gap Filler has been specially formulated to offer superior flexibility in high-stress interior and exterior applications. With up to +\/- 20% joint movement capability, this gap filler is ideal for filling gaps around cornices, wall joints, skirting boards, as well as window and door frames.\u003c\/p\u003e\n\n\u003ch2\u003eApplication\u003c\/h2\u003e\n\n\u003cp\u003eThis product is extremely easy to use. Simply ensure the area is clean and dry, apply the filler, and allow it to dry. It adheres well to multiple surfaces and offers long-lasting results.\u003c\/p\u003e\n\n\u003ch2\u003eUse Cases\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003eCornices\u003c\/li\u003e\n\u003cli\u003eWall Joints\u003c\/li\u003e\n\u003cli\u003eSkirting Boards\u003c\/li\u003e\n\u003cli\u003eWindow \u0026amp; Door Frames\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Poly","offers":[{"title":"Default Title","offer_id":52323824173422,"sku":"GA9311531003172","price":8.69,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/files\/9311531003172_d969f1fb-6f1e-4db1-93a7-78ac9e6093eb.jpg?v=1754712188"},{"product_id":"polyfilla-gloss-finish-390g-the-ultimate-surface-perfector-for-flawless-gloss-paints","title":"Polyfilla Gloss Finish 390g: The Ultimate Surface Perfector for Flawless Gloss Paints","description":"\u003ctitle\u003e\u003c\/title\u003e\n\u003ch1\u003ePolyfilla Gloss Finish 390g: The Ultimate Surface Perfector for Flawless Gloss Paints\u003c\/h1\u003e\n\n\u003ch2\u003eThe Flawless Base for Glossy Elegance\u003c\/h2\u003e\n\n\u003cp\u003eUnlock the perfect preparation for your gloss paint projects with \u003cstrong\u003ePolyfilla Gloss Finish 390g\u003c\/strong\u003e. Specifically designed for filling cracks and dents on doors, windows, trims, and more.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features:\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003eEasy to sand\u003c\/li\u003e\n\u003cli\u003eSets to a super hard, mirror-like finish\u003c\/li\u003e\n\u003cli\u003eHighly crack resistant\u003c\/li\u003e\n\u003cli\u003eReady to use, dries in just 3 hours\u003c\/li\u003e\n\u003cli\u003eFor use on various surfaces, both interior and exterior\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCommon Applications:\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003eDoors\u003c\/li\u003e\n\u003cli\u003eWindows\u003c\/li\u003e\n\u003cli\u003eTrim\u003c\/li\u003e\n\u003cli\u003eArchitraves\u003c\/li\u003e\n\u003cli\u003eSkirting boards\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCompatible Surfaces:\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003ePlasterboard\u003c\/li\u003e\n\u003cli\u003eConcrete\u003c\/li\u003e\n\u003cli\u003eTimber\u003c\/li\u003e\n\u003cli\u003ePrimed metal\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow to Use:\u003c\/h3\u003e\n\n\u003col\u003e\n\u003cli\u003eEnsure the surface is clean and dry. Press filler firmly into dents, holes, or splits.\u003c\/li\u003e\n\u003cli\u003eRemove excess and allow to dry for 2-3 hours. For oil-based paint, allow longer drying times.\u003c\/li\u003e\n\u003cli\u003eSand with fine sandpaper for an immaculate finish. For best results, apply a second, thin coat and sand lightly before painting.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch3\u003eLimitations \u0026amp; Tips:\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003eNot suitable for exterior timber likely to absorb excessive water.\u003c\/li\u003e\n\u003cli\u003eUse Poly Gap filler or silicone sealant where joint movement occurs.\u003c\/li\u003e\n\u003cli\u003eClean up with water before the filler dries.\u003c\/li\u003e\n\u003cli\u003eProtect from rain until painted over.\u003c\/li\u003e\n\u003cli\u003eDo not use below 5°C.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eFor a surface that gloss paints will love, choose \u003cstrong\u003ePolyfilla Gloss Finish 390g\u003c\/strong\u003e.\u003c\/p\u003e\n","brand":"Poly","offers":[{"title":"Default Title","offer_id":52323824206190,"sku":"GA9311531002892","price":20.22,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/files\/9311531002892_1caf36bc-8b91-45d9-ab61-4c02ad027d4e.jpg?v=1754712186"},{"product_id":"polyfilla-interior-small-cracks-2mm-skim-coat-smooth-finish-interior-330ml","title":"Polyfilla Interior Small Cracks 2mm Skim Coat Smooth Finish Interior 330ml","description":"\u003cp\u003e\u003cstrong\u003eA ready to use filler excellent for filling small cracks, dents \u0026amp; fine imperfections to ensure the ultimate smooth surface prior to painting.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eExtremely easy to sand, sets to a super hard finish and is highly crack resistant.\u003c\/p\u003e\n\n\u003cp\u003eFilling blade included\u003c\/p\u003e\n\n\u003cp\u003eFor use on: Plasterboard \u0026amp; gyprock (INTERIOR)\u003cbr\u003e\nFill depth: Up to 2mm\u003cbr\u003e\nDries in: 2 hours\u003cbr\u003e\nReady to use: YES\u003cbr\u003e\nAvailable in: 330mL \u0026amp; 770mL\u003cbr\u003e\nColour: White \u003c\/p\u003e\n\n\u003cp\u003e• Surface to be filled should be clean and dry with no loose or powdery material\u003cbr\u003e\n• Using the attached filling blade press filler in firmly, remove excess and feather edges to minimise sanding. Apply with a trowel to spread over larger areas.\u003cbr\u003e\n• Allow to dry for 30-60 minutes for thin 2-3mm applications, depending on humidity. Allow longer drying times if painting with oil based paints (24 hours minimum) or for deeper applications.\u003cbr\u003e\n• Ideal as a topcoat over other fillers for a perfectly smooth finish.\u003cbr\u003e\n• For best results, apply paint undercoat before applying water or oil based paint top coat.\u003cbr\u003e\n• Use Polyfilla Gap filler or silicone sealant where joint movement occurs.\u003cbr\u003e\n• Clean up with water before filler dries\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eQ. What can I do about hairline cracks in my ceiling? It's impossible to cover them up with paint?\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eA. Paint rarely conceals cracks and is more likely to make them more obvious.It is best to use a filler that is easy to apply and sand such as Polyfilla Interior Small Cracks. It's ideal for covering fine cracks over a broad area.\u003c\/p\u003e\n","brand":"Poly","offers":[{"title":"Default Title","offer_id":52323824238958,"sku":"GA93697040","price":18.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/files\/93697040_7e5de511-bcc5-4f3a-abe4-35627a080d08.jpg?v=1754712185"},{"product_id":"polyfilla-interior-small-cracks-2mm-skim-coat-smooth-finish-interior-770ml","title":"Polyfilla Interior Small Cracks 2mm Skim Coat Smooth Finish Interior 770ml","description":"\u003cp\u003e\u003cstrong\u003eA ready to use filler excellent for filling small cracks, dents \u0026amp; fine imperfections to ensure the ultimate smooth surface prior to painting.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eExtremely easy to sand, sets to a super hard finish and is highly crack resistant.\u003c\/p\u003e\n\n\u003cp\u003eFilling blade included\u003c\/p\u003e\n\n\u003cp\u003eFor use on: Plasterboard \u0026amp; gyprock (INTERIOR)\u003cbr\u003e\nFill depth: Up to 2mm\u003cbr\u003e\nDries in: 2 hours\u003cbr\u003e\nReady to use: YES\u003cbr\u003e\nSize: 770mL\u003cbr\u003e\nColour: White \u003c\/p\u003e\n\n\u003cp\u003e• Surface to be filled should be clean and dry with no loose or powdery material\u003cbr\u003e\n• Using the attached filling blade press filler in firmly, remove excess and feather edges to minimise sanding. Apply with a trowel to spread over larger areas.\u003cbr\u003e\n• Allow to dry for 30-60 minutes for thin 2-3mm applications, depending on humidity. Allow longer drying times if painting with oil based paints (24 hours minimum) or for deeper applications.\u003cbr\u003e\n• Ideal as a topcoat over other fillers for a perfectly smooth finish.\u003cbr\u003e\n• For best results, apply paint undercoat before applying water or oil based paint top coat.\u003cbr\u003e\n• Use Polyfilla Gap filler or silicone sealant where joint movement occurs.\u003cbr\u003e\n• Clean up with water before filler dries\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eQ. What can I do about hairline cracks in my ceiling? It's impossible to cover them up with paint?\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eA. Paint rarely conceals cracks and is more likely to make them more obvious.It is best to use a filler that is easy to apply and sand such as Polyfilla Interior Small Cracks. It's ideal for covering fine cracks over a broad area.\u003c\/p\u003e\n","brand":"Poly","offers":[{"title":"Default Title","offer_id":52323824271726,"sku":"GA9311531002069","price":29.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/files\/9311531002069_060c5106-2075-4f32-82e9-a4c0ab818035.jpg?v=1754712183"},{"product_id":"polyfilla-p10-gap-filler-rapid-your-ultra-quick-low-shrinkage-solution-for-seamless-fills-paintable-in-just-10-minutes","title":"Polyfilla P10 Gap Filler Rapid - Your Ultra-Quick, Low-Shrinkage Solution for Seamless Fills, Paintable in Just 10 Minutes!","description":"\u003ctitle\u003e\u003c\/title\u003e\n\u003ch1\u003ePolyfilla P10 Gap Filler Rapid: The Ultra-Fast Solution for Perfect Fills\u003c\/h1\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003eFlexible\u003c\/li\u003e\n\u003cli\u003eSmooth Finish\u003c\/li\u003e\n\u003cli\u003eRapid Drying – Paintable in 10 minutes*\u003c\/li\u003e\n\u003cli\u003eLow Shrinkage\u003c\/li\u003e\n\u003cli\u003eCrack-Resistant*\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\n\u003cp\u003eIdeal for filling gaps around cornices, wall joints, skirting boards, as well as inside windows and door frames.\u003c\/p\u003e\n\n\u003ch2\u003eUsage Instructions\u003c\/h2\u003e\n\n\u003cp\u003e*To avoid paint cracking, apply to gaps no larger than 5mm deep and 10mm wide at temperatures above 20°C. Allow the sealant to dry before painting. Avoid applying paint too thickly.\u003c\/p\u003e\n\n\u003ch2\u003eWhen to Use\u003c\/h2\u003e\n\n\u003cp\u003ePaintable in just 10 minutes, allowing for fast project completion.\u003c\/p\u003e\n","brand":"Poly","offers":[{"title":"Default Title","offer_id":52323824468334,"sku":"GA9311531003141","price":7.35,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/files\/9311531003141_df7688f7-a592-4cff-86f1-813e54f05828.jpg?v=1754712174"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/collections\/unnamed_32.png?v=1756258521","url":"https:\/\/gluesaustralia.com.au\/collections\/smooth-finish.oembed?page=4","provider":"Glues Australia","version":"1.0","type":"link"}