{"product_id":"dy-mark-metalpro-rust-converter-350g-aerosol","title":"Dy-Mark MetalPro Rust Converter 350g (Aerosol)","description":"\u003cp\u003e\u003cstrong\u003eDy-Mark MetalPro Rust Converter is a tannic acid based rust converter in a 350g aerosol, made for treating rusted steel and iron without stripping back to bare metal.\u003c\/strong\u003e One coat reacts with the rust and leaves a black, moisture-sealing layer that can sit under most paint systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout the formula\u003c\/strong\u003e\u003cbr\u003eThe tannic acid formula chemically reacts with the rust. It turns it into a black compound that bonds to the surface and helps keep moisture out, which slows further corrosion. It is phosphoric acid free. The spray can makes it quick to apply over fences, gates and other awkward shapes, and the result is a black finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere to use it\u003c\/strong\u003e\u003cbr\u003eIndoors: rusted machinery, equipment and metal furniture that you plan to repaint.\u003cbr\u003eOutdoors: rusted gutters, roofs, garden furniture, fencing, gates, trailers and other machinery and equipment.\u003c\/p\u003e\u003cp\u003eSuitable surfaces are rusted steel and iron (ferrous metals). It is not intended for clean, rust-free metal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow to use it\u003c\/strong\u003e\u003cbr\u003eWire brush, scrape or sand off loose rust, flaking paint, dirt, oil and grease so the surface is clean and dry. Work outdoors or in a well-ventilated area, and keep the surface cool and out of wind and direct heat. Shake the can well, then spray light, even coats over the rust until it is covered. For the best protection, overcoat within 3 months of treating the surface. Use Dy-Mark Primer first, then a Dy-Mark MetalPro Quick Dry topcoat colour. After use, invert the can and spray until only clear gas comes out, then wipe the nozzle tip clean. Follow the directions on the can.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eImportant notes\u003c\/strong\u003e\u003cbr\u003eApply to rusted surfaces only, not as a rust-preventative coat on clean metal. It may not stop further rusting if applied over heavy, thick rust scale, so remove loose scale first. It is not recommended for permanent immersion in fresh or salt water. Do not apply zinc-rich primers or cold galvanising coatings over the converted surface. Test a small area first if you are unsure how it will suit your project.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eDy-Mark\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct\u003c\/td\u003e\n\u003ctd\u003eMetalPro Rust Converter (primer and sealer)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer part number\u003c\/td\u003e\n\u003ctd\u003e23803501\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSize\u003c\/td\u003e\n\u003ctd\u003e350g aerosol can\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eBlack finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBase \/ chemistry\u003c\/td\u003e\n\u003ctd\u003eTannic acid based, phosphoric acid free\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003eAerosol spray\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended overcoat window\u003c\/td\u003e\n\u003ctd\u003eWithin 3 months, with Dy-Mark Primer then MetalPro Quick Dry topcoat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUse\u003c\/td\u003e\n\u003ctd\u003eInterior and exterior rusted ferrous metal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSafety\u003c\/strong\u003e\u003cbr\u003eThis is a pressurised aerosol containing flammable solvents and propellant. Keep it away from heat, sparks, open flames and other ignition sources, and do not smoke while using it. Do not pierce or burn the can, even when empty. Use only outdoors or in a well-ventilated area, avoid breathing the spray, and wear gloves and eye protection. Refer to the Safety Data Sheet (SDS) for full details.\u003c\/p\u003e","brand":"Dy-Mark","offers":[{"title":"Default Title","offer_id":67789350764910,"sku":"GA-BN0317989","price":23.37,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/files\/dy-mark-metalpro-rust-converter-350g-aerosol.jpg?v=1792297979","url":"https:\/\/gluesaustralia.com.au\/products\/dy-mark-metalpro-rust-converter-350g-aerosol","provider":"Glues Australia","version":"1.0","type":"link"}