{"product_id":"feast-watson-glass-finish-epoxy-resin-kit-0-5m-clear-gloss","title":"Feast Watson Glass Finish Epoxy Resin Kit 0.5m² (Clear Gloss)","description":"\u003cp\u003e\u003cstrong\u003eFeast Watson Glass Finish is a two-part, high-build clear epoxy that gives interior timber a thick, glossy, glass-like coating in a single pour, supplied here as the 0.5m² kit.\u003c\/strong\u003e It is designed for tabletops, benchtops, furniture and craft pieces, and it can also be used as an embedding or casting medium. Feast Watson says one application is equal to up to 40 coats of traditional varnish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout the formula\u003c\/strong\u003e\u003cbr\u003eA two-part epoxy made up of a resin (Part A) and a hardener (Part B), mixed at a 5:3 ratio. It is a pour-on, self-levelling coating that is hard-wearing and scratch-resistant. The data sheet lists it as 100% solids by volume. It builds a film about 1.2mm thick and has a high gloss level. It has excellent water resistance but is for interior use only. The cured film softens and whitens above 100°C, so keep hot pots and pans off it. The kit includes the resin, the hardener, a stirrer and the Glass Finish Usage Guide.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere to use it\u003c\/strong\u003e\u003cbr\u003eIndoors: interior timber furniture and accessories, benchtops and tabletops, small craft and decoupage projects, and embedding or casting work.\u003cbr\u003eOutdoors: not suitable for exterior timber.\u003c\/p\u003e\u003cp\u003eIt is made for timber, and the data sheet says it can also be used on many other interior surfaces. It can go over Feast Watson Prooftint stain. You can also tint the mix with up to 2% Prooftint for colour. Test on an offcut first, particularly on non-timber surfaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow to use it\u003c\/strong\u003e\u003cbr\u003eWork in a clean, dust and lint-free room that is warm (above 20°C) and not humid (under 60%). Make sure the surface is level, dry, and free of dust, grease, wax and oil. For best results, seal the timber first with two coats of a suitable sealer such as Feast Watson Proofseal. Do not sand between coats or after sealing. Fill any knots or cracks, mask areas you do not want coated, and raise the piece off the work area so the coating can drip freely off the edges. Protect the floor underneath.\u003cbr\u003eCombine the resin and hardener as directed in the pack and stir thoroughly with the supplied stirrer. Do not thin the product. Pour it over the surface straight away, because mixed product left in the container heats up and sets quickly. Spread it with a brush or spreader. Do not roll or spray it. You have about 25 minutes of working time. Carbon dioxide, not heat, is what breaks up surface bubbles, so do not use a heater or hair dryer. Do not try to remove bubbles after about 30 minutes. Tidy the edges with a small brush, then leave the piece in a dust-free area to cure.\u003cbr\u003eClean tools with epoxy thinners, and use it for clean-up only.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eImportant notes\u003c\/strong\u003e\u003cbr\u003eNot suitable for exterior timber, vertical surfaces or flooring. Follow the mixing directions exactly. Wrong proportions, or adding extra hardener, will leave the film soft or sticky. Touch dry is 24 hours, tape can come off after 6 hours, light use is after 36 hours, and full cure takes 7 days. For large projects, consider a professional applicator and always practise on a spare board first. For deep scratches in the cured film, lightly sand and apply one more coat. For routine care, wipe with a soft damp cloth.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eFeast Watson\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct\u003c\/td\u003e\n\u003ctd\u003eGlass Finish Epoxy Resin Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack\u003c\/td\u003e\n\u003ctd\u003e0.5m² kit (Part A resin, Part B hardener, stirrer, usage guide)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eClear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSheen\u003c\/td\u003e\n\u003ctd\u003eGloss\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003ctd\u003eTwo-part epoxy resin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMixing ratio\u003c\/td\u003e\n\u003ctd\u003e5:3 (resin to hardener)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003ePour and spread with brush or spreader\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoats\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFilm thickness\u003c\/td\u003e\n\u003ctd\u003eAbout 1.2mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorking time\u003c\/td\u003e\n\u003ctd\u003eAbout 25 minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTouch dry\u003c\/td\u003e\n\u003ctd\u003e24 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight use\u003c\/td\u003e\n\u003ctd\u003e36 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFull cure\u003c\/td\u003e\n\u003ctd\u003e7 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoverage\u003c\/td\u003e\n\u003ctd\u003eAbout 1200ml of mixed product per 1m² (0.5m² per kit)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClean up\u003c\/td\u003e\n\u003ctd\u003eEpoxy thinners\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUse\u003c\/td\u003e\n\u003ctd\u003eInterior only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSafety\u003c\/strong\u003e\u003cbr\u003eUse in a well-ventilated area and keep containers closed when not in use. Wear overalls, safety glasses or chemical goggles and impervious gloves, and avoid skin and eye contact. Keep out of reach of children. Store in a cool place, and do not let the product enter drains or waterways. Refer to the Safety Data Sheet (SDS) for full details.\u003c\/p\u003e","brand":"Feast Watson","offers":[{"title":"Default Title","offer_id":67789160481134,"sku":"GA9300611513540","price":69.13,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/files\/feast-watson-glass-finish-epoxy-resin-kit-0-5m-clear-gloss.png?v=1792294171","url":"https:\/\/gluesaustralia.com.au\/products\/feast-watson-glass-finish-epoxy-resin-kit-0-5m-clear-gloss","provider":"Glues Australia","version":"1.0","type":"link"}