{"product_id":"fix-a-tap-uniseal-high-density-ptfe-thread-seal-tape-grey-12mm-x-10m","title":"Fix-A-Tap Uniseal High Density PTFE Thread Seal Tape Grey 12mm x 10m","description":"\u003cp\u003e\u003cstrong\u003eFix-A-Tap Uniseal High Density PTFE Thread Seal Tape is a grey thread seal tape for gas and water pipe connections, supplied as a single 12mm x 10m roll on a card.\u003c\/strong\u003e The metallic grey pigment helps it blend in with chrome and galvanised fittings, so it is a good choice when you don't want white tape showing at the joint.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout the formula\u003c\/strong\u003e\u003cbr\u003eThis is a high density PTFE tape designed to form a leak-proof seal on suitable metal threads. It carries both AGA approval for gas threads and WaterMark approval for water threads. The AGA temperature range is -10°C to +210°C and the rated working pressure is 2MPa.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere to use it\u003c\/strong\u003e\u003cbr\u003eIndoors: threaded joints on water and gas pipework, such as fittings, connectors and valves, where a discreet grey finish is preferred.\u003cbr\u003eOutdoors: the manufacturer does not give specific outdoor guidance, so check the fitting and installation requirements for your job.\u003c\/p\u003e\u003cp\u003eIt is intended for suitable metal pipe threads on gas and water lines. Always confirm that the tape suits the fitting and the service you are sealing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow to use it\u003c\/strong\u003e\u003cbr\u003eMake sure the male thread is clean, dry and free of old tape, oil and debris. Start at the thread end and wrap the tape around the thread in the direction the fitting will be tightened, so it doesn't unravel as you screw the joint together. Keep the tape snug and press it into the thread form, then assemble the joint. Gas fitting must be carried out by a licensed gas fitter in line with local regulations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eImportant notes\u003c\/strong\u003e\u003cbr\u003eUse only within the AGA temperature range of -10°C to +210°C and the rated working pressure of 2MPa. This tape is for threaded metal connections and is not a substitute for a compression, flange or push-fit seal. If a joint still weeps after assembly, dismantle it, remove the old tape and rewrap with fresh tape rather than adding more on top.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eFix-A-Tap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct\u003c\/td\u003e\n\u003ctd\u003eUniseal High Density PTFE Thread Seal Tape\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSize\u003c\/td\u003e\n\u003ctd\u003e12mm wide x 10m long\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack\u003c\/td\u003e\n\u003ctd\u003e1 roll on card\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eMetallic grey\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003ePTFE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003eHand wrapped onto pipe threads\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemperature range (AGA)\u003c\/td\u003e\n\u003ctd\u003e-10°C to +210°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRated working pressure\u003c\/td\u003e\n\u003ctd\u003e2MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApprovals\u003c\/td\u003e\n\u003ctd\u003eAGA and WaterMark\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer model number\u003c\/td\u003e\n\u003ctd\u003e208637\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUse\u003c\/td\u003e\n\u003ctd\u003eGas and water pipe threads\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSafety\u003c\/strong\u003e\u003cbr\u003eAs general good practice, keep the tape away from heat and flame beyond its rated temperature range, avoid overheating PTFE, and keep it out of reach of children. Wash your hands after handling if working in a dusty or dirty environment. Always follow the manufacturer's instructions and local plumbing and gas regulations. Refer to the Safety Data Sheet (SDS) for full details.\u003c\/p\u003e","brand":"Fix-A-Tap","offers":[{"title":"Default Title","offer_id":67789208125806,"sku":"GA9312232208637","price":4.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/files\/fix-a-tap-uniseal-high-density-ptfe-thread-seal-tape-grey-12mm-x-10m.jpg?v=1792295333","url":"https:\/\/gluesaustralia.com.au\/products\/fix-a-tap-uniseal-high-density-ptfe-thread-seal-tape-grey-12mm-x-10m","provider":"Glues Australia","version":"1.0","type":"link"}