{"product_id":"loxeal-istant-27-super-glue-high-viscosity-cyanoacrylate-adhesive-20g","title":"Loxeal Istant 27 Super Glue High Viscosity Cyanoacrylate Adhesive 20g","description":"\u003cdiv class=\"product-description\"\u003e\n\u003ch1\u003eLoxeal Istant 27 Super Glue High Viscosity Cyanoacrylate Adhesive 20g\u003c\/h1\u003e\n\u003cp\u003eLoxeal Istant 27 is a \u003cstrong\u003ehigh viscosity, gap-filling super glue\u003c\/strong\u003e based on ethyl cyanoacrylate, made for \u003cstrong\u003eirregular surfaces on plastic, rubber, metal and ceramic\u003c\/strong\u003e. Its thick \u003cstrong\u003e1,200–1,800 mPa·s\u003c\/strong\u003e consistency bridges gaps up to \u003cstrong\u003e200 microns\u003c\/strong\u003e without running, and its deliberately slower fixture time lets you \u003cstrong\u003eadjust and align parts during assembly\u003c\/strong\u003e before the bond locks in. Supplied in a 20g bottle.\u003c\/p\u003e\n\u003ch2\u003eWhy choose Loxeal Istant 27?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh viscosity, gap-filling formula\u003c\/strong\u003e – fills gaps of 10–200 microns on uneven surfaces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStays where applied\u003c\/strong\u003e – thick consistency will not run out of the joint or drip\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRepositioning window\u003c\/strong\u003e – slower fixture allows parts to be adjusted during assembly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrong final bond\u003c\/strong\u003e – tensile strength of 18–25 N\/mm² when cured\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolvent-free, single part\u003c\/strong\u003e – clear cure straight from the bottle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTypical applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBonding rough, porous or poorly matched surfaces\u003c\/li\u003e\n\u003cli\u003ePlastic and rubber parts with irregular mating faces\u003c\/li\u003e\n\u003cli\u003eCeramic repairs where a runnier glue would soak away or drip\u003c\/li\u003e\n\u003cli\u003eAssemblies that need a few extra seconds of alignment time\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to use\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eClean and degrease both surfaces and allow them to dry fully.\u003c\/li\u003e\n\u003cli\u003eApply a bead of adhesive to one surface only.\u003c\/li\u003e\n\u003cli\u003eAssemble the parts, adjust alignment while the slower fixture time allows, then hold with light pressure.\u003c\/li\u003e\n\u003cli\u003eLeave the joint undisturbed while strength develops; avoid heavy loads until fully cured.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eCure times\u003c\/h2\u003e\n\u003cp\u003eFixture speed depends on the substrate, gap, temperature and humidity. Typical fixture times: neoprene\/NBR under 5 seconds; phenolic resin 10–40 seconds; aluminium 10–30 seconds; ABS 15–40 seconds; PVC 20–50 seconds; steel 20–50 seconds; zinc 40–100 seconds. Allow up to 24 hours for full strength. For polyethylene, polypropylene, silicone rubber or PTFE, prime first with Loxeal Primer 7; Loxeal Activator 9 can be used to speed up slow joints.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eChemistry\u003c\/td\u003e\n\u003ctd\u003eEthyl cyanoacrylate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eClear \/ colourless\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eViscosity (+25°C)\u003c\/td\u003e\n\u003ctd\u003e1,200–1,800 mPa·s (high)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGap fill\u003c\/td\u003e\n\u003ctd\u003e10–200 microns\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFixture time\u003c\/td\u003e\n\u003ctd\u003e5–100 seconds, substrate dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength\u003c\/td\u003e\n\u003ctd\u003e18–25 N\/mm² (ISO 6922)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eService temperature\u003c\/td\u003e\n\u003ctd\u003e-50°C to +80°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShelf life\u003c\/td\u003e\n\u003ctd\u003e12 months in original unopened packaging\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack size\u003c\/td\u003e\n\u003ctd\u003e20g bottle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eImportant notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBonds skin instantly\u003c\/strong\u003e – avoid contact with skin and eyes, and keep away from children.\u003c\/li\u003e\n\u003cli\u003eStore in a cool, dry place below +20°C; refrigeration at +2°C\/+7°C extends shelf life. Do not refill containers with used product.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSafety\u003c\/h2\u003e\n\u003cp\u003eConsult the Safety Data Sheet (SDS) before use. Use in a well-ventilated area and wear suitable protection when handling.\u003c\/p\u003e\n\u003cp class=\"disclaimer\"\u003e\u003cem\u003eThis information is provided as a general guide only. Always test the adhesive on your specific materials and refer to the manufacturer's technical documentation before use.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Loxeal","offers":[{"title":"Default Title","offer_id":54240191807854,"sku":"GA-LOXIS27-020","price":22.95,"currency_code":"AUD","in_stock":false}],"url":"https:\/\/gluesaustralia.com.au\/products\/loxeal-istant-27-super-glue-high-viscosity-cyanoacrylate-adhesive-20g","provider":"Glues Australia","version":"1.0","type":"link"}