{"product_id":"pinnacle-hardware-red-thread-locker-10ml-bottle","title":"Pinnacle Hardware Red Thread Locker 10ml (Bottle)","description":"\u003cp\u003e\u003cstrong\u003ePinnacle Hardware Red Thread Locker is a high strength, permanent locking liquid made for larger fasteners from 9.5 to 25mm, supplied here as a single 10ml bottle.\u003c\/strong\u003e It is designed to stop studs, screws and other fasteners working loose under vibration and movement, so it suits workshop, home and site jobs where a fastener needs to stay put.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout the formula\u003c\/strong\u003e\u003cbr\u003eA red, high strength thread locking liquid that gives a permanent hold once set. The manufacturer says it sets in a matter of minutes and helps protect fasteners from the shocks and vibration that normally loosen them. It also adds a protective barrier against rust and other corrosive materials. The manufacturer does not publish the chemistry, cure times, strength figures or temperature range for this product, so none are listed here.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere to use it\u003c\/strong\u003e\u003cbr\u003eIndoors: machinery, equipment, fixtures and fittings where large screws, studs or bolts tend to loosen from movement.\u003cbr\u003eOutdoors: vehicles, trailers and outdoor equipment where vibration and exposure work fasteners loose over time.\u003c\/p\u003e\u003cp\u003eIntended for larger fasteners in the 9.5 to 25mm size range. Check the pack or the manufacturer's Safety Data Sheet if you plan to use it on anything other than a metal fastener.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow to use it\u003c\/strong\u003e\u003cbr\u003eApply the thread locker to the hole before installing your screw or fastener, then fit the fastener as normal. It sets within minutes to give a permanent lock. Because the lock is permanent, plan for the fastener to stay in place and only use it where you do not need to adjust or remove it later.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eImportant notes\u003c\/strong\u003e\u003cbr\u003eThis is a high strength permanent lock, not a removable one, so choose a lower strength thread locker for fasteners you need to service regularly. It is intended for larger fasteners (9.5 to 25mm), so it is not the right choice for small precision screws. Full strength and cure times are not published by the manufacturer, so allow a generous cure period before putting the assembly under heavy load. Recap the bottle after use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003ePinnacle Hardware\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct\u003c\/td\u003e\n\u003ctd\u003eRed Thread Locker\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack\u003c\/td\u003e\n\u003ctd\u003e1 x 10ml bottle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eRed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStrength\u003c\/td\u003e\n\u003ctd\u003eHigh strength, permanent lock\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFastener size\u003c\/td\u003e\n\u003ctd\u003e9.5 to 25mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003eApplied by hand from the bottle to the hole before fitting the fastener\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSet time\u003c\/td\u003e\n\u003ctd\u003eWithin minutes (per manufacturer)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer model number\u003c\/td\u003e\n\u003ctd\u003eSCR033\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSafety\u003c\/strong\u003e\u003cbr\u003eAvoid contact with skin and eyes, wear gloves and eye protection, and use in a well-ventilated area. Keep out of reach of children and store the capped bottle in a cool, dry place. Refer to the Safety Data Sheet (SDS) for full details.\u003c\/p\u003e","brand":"Pinnacle Hardware","offers":[{"title":"Default Title","offer_id":67788731056494,"sku":"GA-BN2430039","price":16.12,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/files\/pinnacle-hardware-red-thread-locker-10ml-bottle.jpg?v=1792289990","url":"https:\/\/gluesaustralia.com.au\/products\/pinnacle-hardware-red-thread-locker-10ml-bottle","provider":"Glues Australia","version":"1.0","type":"link"}