{"product_id":"prep-plastermate-stud-adhesive-for-plasterboard-to-timber-and-steel-studs-5-2kg-acrylic","title":"Prep Plastermate Stud Adhesive For Plasterboard To Timber And Steel Studs 5.2kg (Acrylic)","description":"\u003cp\u003ePlastermate Stud Adhesive is a pre-mixed, trade-quality wallboard adhesive for fixing plasterboard sheets to wall and ceiling framing. Part of the Plastermate plastering range that Prep Productions has manufactured in Sydney for over 25 years, it is used by professional plasterers and DIY renovators alike. The smooth, non-slump paste holds its dab shape, which matters most when you are working overhead on ceilings, and it grabs strongly to both timber and steel studs. It complies with Australian Standard AS 2753, the standard for wallboard adhesives. The 5.2kg pail is the trade size for lining whole rooms.\u003c\/p\u003e\u003ch3\u003eFormula overview\u003c\/h3\u003e\u003cp\u003eA thick, water-based acrylic paste: an acrylic copolymer binder loaded with fine mineral filler gives it very high viscosity, so dabs stay exactly where you put them without slumping or stringing. It is light blue in colour, ready to use straight from the pail, and non-flammable.\u003c\/p\u003e\u003ch3\u003eWhere to use it\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIndoor:\u003c\/strong\u003e bonding plasterboard to timber studs and metal or steel studs for wall and ceiling linings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOutdoor:\u003c\/strong\u003e not intended for exterior use or wet areas unless the board manufacturer's system specifies otherwise. Check the pail label before using on substrates other than timber or steel framing.\u003c\/p\u003e\u003ch3\u003eHow to use\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMake sure framing is clean, dry and free of dust or oil.\u003c\/li\u003e\n\u003cli\u003eApply walnut-sized dabs of adhesive to the stud face, spaced per the plasterboard manufacturer's specification for the sheet and frame type.\u003c\/li\u003e\n\u003cli\u003ePress the sheet into position and fix with screws or nails as the lining system requires.\u003c\/li\u003e\n\u003cli\u003eRefer to the pail label for open time and cure guidance.\u003c\/li\u003e\n\u003cli\u003eWash tools and hands in warm soapy water before the adhesive dries.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eImportant notes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDab size and spacing should follow the plasterboard system you are installing; the adhesive complements, not replaces, mechanical fixings.\u003c\/li\u003e\n\u003cli\u003eStore in a cool place out of direct sunlight with the lid sealed.\u003c\/li\u003e\n\u003cli\u003eDried residue is combustible even though the wet paste is not; let spills harden and dispose of them per local regulations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSize\u003c\/td\u003e\n\u003ctd\u003e5.2kg pail\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eWater-based acrylic stud adhesive\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eLight blue\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConsistency\u003c\/td\u003e\n\u003ctd\u003eThick non-slump paste\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSubstrates\u003c\/td\u003e\n\u003ctd\u003ePlasterboard to timber and steel studs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStandard\u003c\/td\u003e\n\u003ctd\u003eAS 2753\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClean up\u003c\/td\u003e\n\u003ctd\u003eWarm soapy water\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMade in\u003c\/td\u003e\n\u003ctd\u003eAustralia\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eSafety\u003c\/h3\u003e\u003cp\u003eNot classified as hazardous and not a scheduled poison. The paste is non-flammable. It may mildly irritate eyes, and repeated or prolonged skin contact can cause irritation, so wear safety glasses (especially when fixing ceilings) and rubber gloves, and work with adequate ventilation. If it gets in the eyes, irrigate with water for 15 minutes and seek medical attention; skin washes clean with warm soapy water. If swallowed, rinse the mouth, drink water, do not induce vomiting and seek medical advice. Keep out of reach of children. Refer to the manufacturer's Safety Data Sheet before use.\u003c\/p\u003e","brand":"Prep","offers":[{"title":"Default Title","offer_id":53885387735406,"sku":"GA9314261900223","price":33.2,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/files\/PM-StudAdhesive_afbcf107-109a-465e-8a66-b76e2b3ff564.png?v=1780877940","url":"https:\/\/gluesaustralia.com.au\/products\/prep-plastermate-stud-adhesive-for-plasterboard-to-timber-and-steel-studs-5-2kg-acrylic","provider":"Glues Australia","version":"1.0","type":"link"}