{"product_id":"protek-type-n-clear-pvc-solvent-cement-250ml-for-non-pressure-pipes","title":"Protek Type N Clear PVC Solvent Cement 250ml for Non-Pressure Pipes","description":"\u003cp\u003e\u003cstrong\u003eProtek Type N Clear Solvent Cement is a PVC-U pipe cement made for non-pressure joints, supplied here in a 250ml container with a built-in brush cap.\u003c\/strong\u003e It is designed for plumbers, electricians and DIYers who are joining PVC pipe, fittings and sheet on drainage, sewerage, stormwater and conduit work.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout the formula\u003c\/strong\u003e\u003cbr\u003eA clear, viscous, solvent-based cement that softens the PVC surfaces so the pipe and fitting fuse into one joint as the solvent evaporates. It is formulated for non-pressure (Type N) applications only. The manufacturer states it conforms to AS\/NZS 3879 and is approved to AS\/NZS 4020 for use in contact with drinking water. It also carries Watermark and ISO 9001:2008 accreditation, is Australian made and comes with a 10 year manufacturer's warranty. The container cap carries a natural bristle brush, so there is no separate applicator to buy.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere to use it\u003c\/strong\u003e\u003cbr\u003eIndoors: waste and drainage pipework, electrical conduit and PVC sheet jointing in residential, commercial and industrial buildings.\u003cbr\u003eOutdoors: sewerage, drainage and stormwater lines in non-pressure PVC-U pipe up to 100mm diameter.\u003c\/p\u003e\u003cp\u003eSuitable material: PVC-U pipe, fittings and sheet. It is not intended for pressure pipe systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow to use it\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCut the pipe square, remove burrs from the inside and outside edges, and dry fit the joint to check alignment.\u003c\/li\u003e\n\u003cli\u003eWipe the spigot and socket clean and dry, then clean and prime both surfaces with Protek Priming Fluid. Priming is recommended before applying the cement.\u003c\/li\u003e\n\u003cli\u003eBrush an even coat of cement onto the spigot and inside the socket, push the joint together promptly and hold it briefly.\u003c\/li\u003e\n\u003cli\u003eWork on one joint at a time, wipe away excess cement and reseal the cap tightly after use.\u003c\/li\u003e\n\u003cli\u003eFollow the jointing method in AS\/NZS 2032 and the manufacturer's instructions for set and cure times.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eImportant notes\u003c\/strong\u003e\u003cbr\u003eType N cement is for non-pressure applications only. Use a Type P cement for pressure pipe. The retailer data lists this size for PVC pipe up to 100mm diameter. Use in a well-ventilated area, because the vapour is strong and the cement is highly flammable. Do not use it on other plastics.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eProtek\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct\u003c\/td\u003e\n\u003ctd\u003eType N Clear Solvent Cement (Model A6006)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSize\u003c\/td\u003e\n\u003ctd\u003e250ml\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eClear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003ctd\u003eSolvent-based, viscous liquid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003eBrush applied, via the cap-mounted natural bristle brush\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStandards and approvals\u003c\/td\u003e\n\u003ctd\u003eAS\/NZS 3879, AS\/NZS 4020, Watermark, ISO 9001:2008\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUse\u003c\/td\u003e\n\u003ctd\u003eJoints in non-pressure PVC-U pipe, fittings and sheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin and warranty\u003c\/td\u003e\n\u003ctd\u003eAustralian made, 10 year manufacturer's warranty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLow VOC\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSafety\u003c\/strong\u003e\u003cbr\u003eThe main ingredients are methyl ethyl ketone, cyclohexanone and tetrahydrofuran. Keep away from heat, sparks, open flames and other ignition sources, and do not smoke. Use outdoors or with good ventilation, and wear safety glasses or goggles and chemical-resistant gloves. Store in the original container, tightly sealed, in a cool, well-ventilated place away from ignition sources. Refer to the Safety Data Sheet (SDS) for full details.\u003c\/p\u003e","brand":"Protek","offers":[{"title":"Default Title","offer_id":67789120012654,"sku":"GA-BN4750117","price":7.79,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/files\/protek-type-n-clear-pvc-solvent-cement-250ml-for-non-pressure-pipes.png?v=1792293145","url":"https:\/\/gluesaustralia.com.au\/products\/protek-type-n-clear-pvc-solvent-cement-250ml-for-non-pressure-pipes","provider":"Glues Australia","version":"1.0","type":"link"}