{"product_id":"rust-oleum-leakseal-flexible-rubber-coating-spray-312g-clear","title":"Rust-Oleum LeakSeal Flexible Rubber Coating Spray 312g (Clear)","description":"\u003cp\u003e\u003cstrong\u003eRust-Oleum LeakSeal Clear is a rubberised spray-on sealant that stops leaks and seals cracks in one easy aerosol, supplied here as a single 312g can.\u003c\/strong\u003e It lays down a flexible, water-tight coating over gutters, roofing, flashings, ducting and more, and the clear finish lets the original surface show through. It suits homeowners and maintenance tradies who need a quick, no-fuss repair.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout the formula\u003c\/strong\u003e\u003cbr\u003eA solvent-based, rubberised coating built on a hydrocarbon resin, delivered by a flammable propellant. It sprays on as a firm but flexible film that fills small gaps, cracks and holes (the manufacturer rates it for gaps up to about 6mm) and forms a barrier against water, air and moisture. It dries to a semi-smooth finish that does not sag or drip, helps protect the surface from rust, and can be topcoated with latex or oil-based paint once cured.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere to use it\u003c\/strong\u003e\u003cbr\u003eIndoors: ductwork, vents, pipes and other surfaces that need a flexible moisture seal.\u003cbr\u003eOutdoors: gutters, downpipes, roof flashings, metal roofing, sheds, vents and cracked masonry or concrete.\u003c\/p\u003e\u003cp\u003eSuitable materials include metal, aluminium, galvanised metal, PVC, concrete, masonry, asphalt roofing materials, vinyl siding and fibreglass. Test a small hidden area first on any surface you are unsure about.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow to use it\u003c\/strong\u003e\u003cbr\u003eRemove all dirt and debris from the repair area. The manufacturer's technical data also advises washing with detergent and water, rinsing and letting the surface dry thoroughly, removing loose paint or old coatings, and lightly sanding glossy surfaces. Mask off surrounding areas to protect them from overspray.\u003cbr\u003eApply outdoors or in a well-ventilated space, ideally between 10 and 32°C with humidity below 65%. Avoid very windy or dusty conditions.\u003cbr\u003eShake the can vigorously for one minute after the mixing ball starts to rattle, and shake often during use. Do a test spray on cardboard to get a feel for the pattern.\u003cbr\u003eHold the can about 20 to 45cm from the surface and spray in short, even strokes. Apply a light first coat, then a heavier second coat for full coverage. Moving closer to the surface builds a thicker film.\u003cbr\u003eOnce the coating has fully cured, it can be painted with latex or oil-based paint if you want it to match the surroundings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eImportant notes\u003c\/strong\u003e\u003cbr\u003eDry to touch in about 30 minutes, with full cure in about 24 hours. Not recommended for rubber surfaces or for surfaces under continuous water immersion. It is not fire or high-heat resistant and is not rated as mould or mildew resistant. Coverage varies with surface porosity and how thick you apply it. Do not apply to hot surfaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eRust-Oleum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct\u003c\/td\u003e\n\u003ctd\u003eLeakSeal Flexible Rubber Coating Spray\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack\u003c\/td\u003e\n\u003ctd\u003e1 x 312g aerosol can\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eClear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003ctd\u003eSolvent-based, hydrocarbon resin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003eAerosol spray\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDry to touch\u003c\/td\u003e\n\u003ctd\u003eAbout 30 minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFull cure\u003c\/td\u003e\n\u003ctd\u003eAbout 24 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum gap or crack size\u003c\/td\u003e\n\u003ctd\u003eUp to about 6mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication temperature\u003c\/td\u003e\n\u003ctd\u003e10 to 32°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePaintable\u003c\/td\u003e\n\u003ctd\u003eYes, with latex or oil-based paint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexibility\u003c\/td\u003e\n\u003ctd\u003eRemains flexible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUse\u003c\/td\u003e\n\u003ctd\u003eInterior and exterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSafety\u003c\/strong\u003e\u003cbr\u003eKeep away from heat, sparks, open flames and other ignition sources, and do not smoke. Do not spray onto a flame. The can is pressurised: do not pierce or burn it, even when empty, and do not expose it to temperatures above 50°C. Use outdoors or with good cross-ventilation. Refer to the Safety Data Sheet (SDS) for full details.\u003c\/p\u003e","brand":"Rust-Oleum","offers":[{"title":"Default Title","offer_id":67789157499246,"sku":"GA0020066234119","price":23.25,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/5669\/5662\/files\/rust-oleum-leakseal-flexible-rubber-coating-spray-312g-clear.png?v=1792293845","url":"https:\/\/gluesaustralia.com.au\/products\/rust-oleum-leakseal-flexible-rubber-coating-spray-312g-clear","provider":"Glues Australia","version":"1.0","type":"link"}