Selleys All Fix Big Jobs is a convenient all-rounder adhesive that sticks just about anything to anything. It provides virtually instant grab on dry porous surfaces eliminating the need for nails and screws on many jobs. It is a heavy-duty adhesive that will bond a wide variety of materials, has low fumes, and conveniently cleans up with water. 

Features
Fast - virtually instant grab on dry porous surfaces eliminates the need for nails and screws on many jobs
Fast grab minimises the need for clamping
Strong - Heavy-duty adhesive that will bond a wide variety of materials
Safe - Low odour, low fumes and non-flammable
Dries white and is able to be painted over once dry
Lots of working time - bonds can be repositioned within 5-10 minutes

Easy to use
Fills minor gaps in uneven surfaces (bridges gaps up to 9mm)
Strong bond on porous surfaces after 24 hours, cures to maximum strength over a few days

Where can this product be used?
Re-adhering carpet
House numbers to brickwork
Wooden furniture repairs
Repairing damaged plasterboard
Building a dog house
Skirting boards
Attaching architraves
Attaching wall panelling
Attaching chair (dado) rails
Attaching or building a shelf
Use for larger interior projects

What materials is this product suitable for?
Plasterboard
Cabinet
Plaster coving
Carpet
Wood
Particleboard
Metals (other surface must be porous)
Glass (other surface must be porous)
Ceramics (other surface must be porous)
Brick (other surface must be porous)
Concrete
Cork
Polystyrene foam (other surface must be porous)
UPVC (other surface must be porous)
Many rigid plastics* (other surface must be porous)
Loose wall tiles (in non-wet areas)

How to Use
Surfaces to be bonded must be dry, sound and free from grease/oil and dust.
Work tube between fingers for several seconds to loosen contents. Cut the tip of the nozzle and squeeze to apply adhesive onto one surface.
Immediately press parts firmly together. Bonds can be repositioned for up to 5 minutes. If adhesive surfaces form a skin no bond will form. The bond will usually have good strength after 24 hours and will continue to strengthen for a few days.

Application Tips

For long narrow attachments (e.g. skirting boards) apply one or two continuous beads.
For larger flat areas use beads approximately 30cm apart.
For small items (e.g. tiles) spots of adhesive may be used.
Wipe away excess adhesive with a damp cloth. Dried adhesive is best removed by scraping.

Limitations:

Not suitable for permanently wet or damp areas.
Not suitable for fixing mirrors. Use Selleys Liquid Nails Mirror Metal & Glass.
*Not suitable for polyethylene and polypropylene. Use Selleys All Plastic Fix.
Bonds are not water-resistant. Protect bonds from water penetration if used in exterior applications.
Not resistant to strong acids and strong organic solvents.
Do not apply below 10°C.
When used near brass or copper, the immediate area of contact will discolour to a blue tone.

Handy Tips
At least one surface must be porous for effective bonding. If both surfaces are non-porous, drying time is greatly increased.
Clamping may be necessary until adhesive dries.
Wet, damp and cold weather will increase drying time
Wipe away excess with a damp rag.
Use temporary supports when bonding a heavy load - support until adhesive dries. Particularly on uneven or smooth or non-porous surfaces.
Good for gap filling - i.e. sticking two rough surfaces together.
All Fix Big Jobs may stain slightly and colour can be paler than the surrounding area, squeeze out should be wiped off if intending to stain.

Clean Up
Uncured product may be removed with water.
Cured product can be removed by scraping.