Betta TileCare Tile & Grout Sealer with Wheel Applicator is a premium, water-based penetrating sealer that forms an invisible moisture-repellent barrier. Ideal for use in bathrooms, kitchens, laundries, and other wet areas, it helps prevent water damage, stains, and mould growth on porous tiles and grout.

The included wheel applicator makes sealing fast and easy, delivering smooth and precise coverage with minimal mess. Once cured, it dries clear without leaving a slippery or glossy finish, maintaining the natural look of your surfaces.

Surface Preparation

• Ensure surfaces are clean, dry, and free of mould, soap scum, and any existing sealers or coatings.

• Remove silicone sealants prior to application.

• For best results, allow grout and tiles to dry for at least 24 hours before sealing. Heavily porous surfaces may require 3–4 days of drying time.

Application Instructions

1. Shake well before use.

2. Starting from the top of the area, apply sealer evenly using the wheel applicator.

3. Ensure all tile and grout lines are thoroughly coated.

4. Allow to absorb for 15 minutes.

5. Reapply a second coat if needed.

6. Wipe away any excess product from tiles with a clean, dry cloth.

7. Avoid heavy foot traffic or moisture exposure for at least 24 hours after final coat.

Coverage

• Approx. 5–10m² per litre depending on tile and grout porosity.

Drying Time

• Touch dry in 15 minutes

• Fully cured in 24 hours

Clean-Up

• Clean tools and applicator with water immediately after use.

Technical Data

• Appearance: Milky white (dries clear)

• Base: Water-based penetrating sealer

• Finish: Invisible, non-slip

• Application method: Wheel applicator

• Suitable for: Porous tiles and grout (indoor use)