Betta Tilecare Tile & Grout Sealer waterproofs porous tiles and grout without leaving a slippery film coating, making it perfect for kitchens, bathrooms, and other tiled areas.

Drying Time:

• Recoat: 15 minutes
• Full Dry: 24 hours

Coverage:

• 1L covers 5-10m²

Available Sizes:

• 1L, 4L, 300g Aerosol, 500ml Wheel Applicator, 750ml Trigger

Application Method & Cleanup:

• Tools: Paint brush, roller, or pump spray

Features:

• Water-based formula
• Clear penetrating finish
• Invisible, moisture-repellent coating
• Easy to use
• Proven technology
• Non-slip finish

Preparation:

1. Remove any silicone sealant strips and soap build-up.
2. Clean mould off tiles and grout using Betta Tilecare Mould Rid™ or bleach.
3. Rinse thoroughly with water after cleaning.
4. Remove and patch all loose or missing tile grout. For improved results, add Bondall HydroCrete to the grout mix.
5. Ensure the application area is dry for 12-24 hours before applying the sealer.
6. For porous surfaces or after high-pressure washing, allow 3-4 days drying time before sealing.

Application:

1. Start from the top of the wall, applying Tile & Grout Sealer liberally over tiles and grout.
2. Finish by applying the sealer to the shower base or floor. Ensure even coverage across all surfaces.

Drying:

1. Wait at least 15 minutes for the first application to react before reapplying.
2. After the second application, wait another 15 minutes, then use a dry cloth to remove any excess from the tile surface.
3. Allow 24 hours before using the sealed area.

Tips & FAQs:

• Not for Water Holding Vessels: This product is not intended for waterproofing items like ponds or fish tanks.
• Test Before Use: Always test on a small, inconspicuous area to ensure it provides the desired result.
• Avoid Over-application: If the sealer runs or pools, wipe down with a clean, dry, low-lint cloth.
• Apply Evenly: Take care to apply evenly, especially on pitted surfaces.
• Pre-treat Stains & Mould: Ensure stains, moss, and mould are treated prior to sealing.
• Avoid Pooling: Do not allow the product to pool or over-apply on surfaces.

Betta Tilecare Tile & Grout Sealer is a reliable and easy-to-use product for waterproofing and protecting your tiles and grout, providing long-lasting protection without altering the natural appearance of your surfaces.