Davco Grey One Pot Premixed Tile Adhesive is a high-performance, ready-to-use acrylic-based adhesive, perfect for interior wall and floor tiling. Its premixed formula eliminates the need for onsite preparation, providing excellent adhesion and ease of application for both professionals and DIYers.

Surface Preparation: Ensure all surfaces are sound, dry, and free from dust, oil, grease, or any other contaminants. Painted or glossy surfaces should be roughened and cleaned. For porous surfaces, priming may be required to ensure maximum adhesion.

Application Instructions:

• Stir the adhesive thoroughly before use.

• Using a notched trowel, apply the adhesive to the substrate. Only spread as much adhesive as can be tiled within 20 minutes.

• Firmly press tiles into the adhesive, ensuring full coverage on the tile back.

• Adjust tiles within 20 minutes of placing them.

• Allow adhesive to set for 24 hours before grouting.

Coverage: Approximately 0.75–1.25 m² per litre using a 6mm notched trowel. Coverage may vary depending on substrate and trowel size.

Drying Time: Allow 24 hours before grouting. Full cure achieved within 7 days under normal conditions.

Clean Up: Clean tools and excess adhesive with water immediately after use. Once dried, adhesive is more difficult to remove.

Technical Data:

• Appearance: Grey paste

• Base: Acrylic

• Open Time: 20 minutes

• Adjustment Time: 20 minutes

• Application Temperature: 5°C to 35°C

• Ready for Grouting: After 24 hours