Dunlop Floor Repairer Rapid Patch Mortar is a high-performance, fast-setting compound ideal for repairing holes, cracks, and uneven surfaces on internal floors. Suitable for use prior to the installation of tiles, vinyl, carpet, or other floor coverings, it delivers a smooth, level finish ready for light foot traffic within 45 minutes and covering applications in as little as 2 hours.

Surface Preparation:
Ensure the substrate is clean, sound, and free of grease, dust, oil, paint, or other contaminants. Surfaces should be dry and firm. Smooth or sealed surfaces must be roughened or etched. For porous substrates like timber, fibre-cement, or plasterboard, priming may be required. For floors in direct contact with soil, a moisture barrier should be used before applying the patch mortar.

Mixing Instructions:
Add 5kg of product into approximately 1.5L of clean water in a clean container. Mix thoroughly with a mixing paddle to a lump-free, smooth consistency. Mix only what can be used within 15 minutes.

Application Instructions:
Apply with a steel trowel to the required thickness (up to 20mm in a single application). Shape and smooth the surface before the material begins to set. For deeper repairs, additional layers can be applied once the initial layer has set. Avoid adding extra water once mixed.

Coverage:
Approximately 3m² at 1mm thickness per 5kg bag. Coverage varies with surface texture and thickness applied.

Drying Time:

• Initial set: ~45 minutes

• Ready for coverings (tiles, vinyl, carpet): ~2 hours

• Final cure: 24 hours (depending on thickness and ambient conditions)

Clean Up:
Clean tools and equipment immediately with water before the mortar sets.

Technical Data:

• Type: Rapid-setting cementitious repair mortar

• Application Thickness: Up to 20mm

• Pot Life: 15 minutes

• Foot Traffic: 45 minutes

• Ready for Coverings: 2 hours

• Colour: Grey

• Shelf Life: 12 months in original unopened packaging stored in a dry area