Dunlop Premium Floor Sealer Easy Safe Application
Natural Look Tiles Sandstone Slate Brick Concrete
A water-based, penetrating sealer that maintains the natural surface appearance while offering superior stain resistance against both oil and water-based stains. It is ideal for indoor and outdoor use with excellent UV resistance, suitable for a variety of surfaces.
Key Benefits:
- Superior stain resistance (oil and water)
- Easy to clean and maintain
- Excellent UV resistance, ideal for outdoor areas
Surface Preparation:
Ensure surfaces are free from dust, dirt, grease, oil, previous coatings, adhesives, and other contaminants. Any stains or surface irregularities present at the time of application will be locked into the final finish. Test sealer on a small, inconspicuous area to ensure suitability.
Application:
- Apply sealer by brush, roller, or low-volume spray applicator.
- Avoid excess application. Remove any material that hasn’t penetrated after 10 minutes with a cloth. Most surfaces require two coats, but porous surfaces may need additional coats. Allow 30 minutes drying time between coats.
Drying Time:
- 30 minutes to 1 hour between coats.
- 24 hours before light foot traffic.
- 3 days for rubber wheeled traffic.
- 7 days for full curing.
Coverage:
1L covers approximately 20m² per coat, depending on surface porosity.
Clean-Up:
Clean all equipment immediately after use with warm water or a water/detergent solution.
Shelf Life:
12 months when stored in an unopened container at 23°C.
Precautions:
- While it repels immediate spills, the sealer’s stain resistance diminishes if spills are left unaddressed.
- This product is not a waterproofing solution and is not recommended for use around swimming pools.
Safety:
Avoid inhalation, and eye or skin contact. In case of contact, rinse thoroughly with water. If swallowed, seek immediate medical advice. Always refer to the MSDS available on the Dunlop website.
(9315021022513)
SKU | 9315021022513 |
Barcode # | 9315021022513 |
Brand | Dunlop |
Shipping Weight | 5.0000kg |
Shipping Width | 0.100m |
Shipping Height | 0.100m |
Shipping Length | 0.100m |
Shipping Cubic | 0.001000000m3 |
Be The First To Review This Product!
Help other Glues Australia users shop smarter by writing reviews for products you have purchased.