PlasticBonder™ is a quick-setting, two-part, urethane adhesive system that provides strong and lasting repairs and works on thermoset, carbon fibre composites, thermoplastics, coated metals, concrete & more. PlasticBonder™ has a 1:1 mixing ratio, sets in 15 minutes and can be sanded after 30 minutes. With a tensile strength of 3770 PSI, PlasticBonder™ sets to a tan colour and cures to a hard, permanent bond.

GREAT FOR
Filling Dents
Bumpers
Automotive Trim
Composite Panels
Interior & Exterior Plastic Parts
Fibreglass

USE ON
Automotive
Brick
Ceramic
Concrete
Fibreglass
Plastic/Composite/PVC
Wood
And More

PREPARE
Clean surface area of dirt, grease, oil, paint, or loose debris. For best results use a detergent or degreaser to first clean the surface, then roughen surface with file or coarse sandpaper to provide the best repair.

MIX
After removing the replaceable cap, press down on the plunger and squeeze equal amounts onto a disposable surface and mix thoroughly.

APPLY
Apply with appropriate tool in an even coat, weld bead or extruded shape as needed.

DRY
Sets in 15 minutes. Cures in 30 minutes. If the temperature is below 40ºF, then set time is longer.