Selleys No More Gaps Timber Floors is specifically designed to fill and sealing gaps around and between tongue and groove timber flooring and between other timber panels and fittings where extra flexibility is required.

Features
Superior flexibility and stretch capability to cope with movement
Truly sandable to give a smooth clean finish.
Contains real wood fibre allowing the filler to receive stains better than standard gap fillers
Filler provides an airtight seal, keeping out draughts, dust and pests.
Easy water clean up

Where can this product be used?
For filling and sealing gaps around and between tongue and groove timber floors.
Around and between all types of timber panels and fittings eg. Bedroom and kitchen fittings, benchtops, skirting boards and architraves. 

What materials is this product suitable for?
Timber floors
Timber match:
Jarrah - Jarrah,  River Red Gum, Karri
Hardwood - Black Butt, Spotted Gum, Brush Box , Tasmanian Oak, Cypress, Beech
Walnut - Ironbark,  Teak, Dark stained timbers and engineered floors
Baltic - Pine, Myrtle, Alpine Ash

Size    
380g Cartridge

Technology    
Water-Based

Use    
Interior

How to Use:
The surface to be filled must be clean, dry and free from dust.
Cut seal and nozzle to suit the width of the gap. Fit to the cartridge. Insert into a caulking gun such as Selleys Light Speed Caulking gun.
Apply with a caulking gun, forcing product into the gap.
Press in and smooth off with a spatula. Take care not to drag out applied filler from the gap. Use a spatula to scrape off as much residue as possible from the timber surface, to minimise sanding necessary.
Clean up with a damp cloth immediately.
Allow drying for at least 24 hours before sanding off any residue from the timber surface. Allow longer time in colder weather or if residue left on timber is excessive.
Stain and varnish/paint as desired. Ensure stain/varnish is not allowed to pool in the joint – lightly wipe off while wet if necessary.
        Limitations:

Not for exterior use.
Not for gaps greater than 3mm wide in trafficable joints. 

Tips:
Ensure sufficient product is applied into the gap if filling tongue and groove overlaps
Coverage: 18 m / 3mm bead
Re-apply filler if timber movement is excessive and movement capability is exceeded, or if a flush fill is desired.