Selleys Wet Area Silicone is a high-quality, neutral cure silicone sealant designed specifically for areas exposed to moisture, such as kitchens, bathrooms, and laundries. This 100% silicone formula provides a long-lasting waterproof seal that won’t shrink, crack, or peel for up to 25 years, making it ideal for sealing around showers, sinks, bathtubs, and other wet areas. Its anti-mould properties ensure that your bathroom stays hygienic and clean for longer.

The 90ml tube is perfect for smaller jobs or touch-ups, offering easy handling for precise application in tight spaces. Selleys Wet Area Silicone adheres to a wide range of materials, including ceramics, glass, stainless steel, metal fittings, and plastic laminates, ensuring a secure, flexible seal in high-humidity environments. Whether you’re sealing around a kitchen sink or maintaining the edges of a shower enclosure, this product guarantees professional results every time.

Where can this product be used?

• Showers screens
• Baths
• Spas
• Sinks
• Plumbing Fixtures

What materials is this product suitable for?

• Ceramic, glazed and porcelain fixtures
• Metal, copper and brass fittings
• Plastic laminates
• Rubber
• Glass
• Stainless steel
• Concrete and grouts
• Many plastics including polystyrene

How to Use

Use in a well ventilated area. Avoid contact with skin and eyes.

1. Clean surface with mineral turpentine and dry.
2. Cut cartridge, fit and cut nozzle at 45° angle and fit into a caulking gun.
3. Apply with steady pressure, ensuring sealant is pushed into joint.
4. Tool with a spatula dipped in detergent water within 5-10 mins of application.
5. Clean up with mineral turpentine before product skins.
6. Sealant will cure in 72hrs.

Limitations:

• Not paintable. Complete painting 7 days prior to applying sealant.
• Not suitable for building materials that bleed oils or solvents, such as impregnated wood.
• Not for use on polyethylene, polypropylene or Teflon. Pre-test plastics before use.
• Not suitable for aquariums.
• Not suitable for food or drinking water contact.
• Not suitable for permanent water immersion.

Handy tips

• For neater joints, mask sides before applying sealant and remove tape before sealant skins.
• When first applying product, extrude a small amount onto a piece of scrap material to ensure a smooth continuous flow of silicone sealant.
• Work in sections that can be completed before sealant skins.
• Tooling off and tape removal must be completed before skinning occurs or a rough surface, may result so working in sections allows for a better finish.

*Warranty Information

Refer to product label for full conditions. This guarantee does not limit and may not necessarily exceed your rights under the Competition and Consumer Act 2010.

Clean Up

• Uncured product may be removed with mineral turps.
• Cured product can be removed with Selleys Silicone Remover or by
  cutting and scraping.