Sika® Filler One Strike Maxi is revolutionary ready-mixed lightweight filler for the preparation of numerous surfaces prior to painting or wallpapering. For filling on plaster, brick, stone, wood and render.
 

Fills in one go- No need to build up layers of filler – fills up to 75mm deep in one application
No sanding or sagging
Fast drying and easy to sand

CHARACTERISTICS AND ADVANTAGES

Fills in one go- No need to build up layers of filler – fills up to 75mm deep in one application
No sanding or sagging
Fast drying and easy to sand
Internal/external use
Overpaintable
Overstainable
Easy to use
Dries brilliant white

COLOUR: White 

Sika® Filler One Strike is revolutionary ready-mixed lightweight filler for the preparation of numerous surfaces prior to painting or wallpapering. Based on high strength lightweight polymeric fillers, the product outperforms conventional fillers in most applications
Designed for professional and D.I.Y use.

Uses

Sika® Filler One Strike 1 is suitable for filling of gap in:
 Plaster
 Brick
 Stone
 Wood
 Render

Characteristics
Advantages
 Fills in one go- No need to build up layers of filler - fills up to 75mm deep in one application.
 Easy to use - lightweight paste is incredibly easy to apply.
 No sanding required - finishes to a smooth surface.
 No sagging - the lightweight properties of Sika® Filler One Strike prevent sagging even on ceilings.
 Non-shrink - will not shrink back whilst drying.
 Quick drying - ready to paint/paper in just 30 minutes.
 Overpaintable with most solvent based and emulsion paints.
 Overstainable
 Internal/external use.
 Dries brilliant white

Product Data
Appearance / Colour Lightweight brilliant white paste
Packaging 300 ml cartridge

Storage
Storage Conditions /
Shelf-Life
24 months from date of production if stored properly in undamaged and unopened original sealed packaging, in cool and dry conditions. Protect from frost.

Technical Data
Chemical Base Filled water based polymer dispersion.
Density ~ 0.49-053 kg/l
Solid Content ~ 61% (w/w)
pH 8.0 – 9.0
Grading Dmax : 0.12 mm

Layer Thickness Maximum Width: 50 mm
Maximum Fill: 75 mm

System Information
Application Details
Consumption This depends on the substrate roughness and thickness of the layer applied.
As a guide, ~ 1 cartridge of Sika®
Filler One Strike yields 0.3 m
2 per mm thick.
Substrate Quality Clean, free from dust, dry and oil.

Application Conditions / Limitations
Substrate Temperature +5°C min. / +30°C max.
Ambient Temperature
+5°C min. / +30°C max.

Application Instructions
Mixing Sika® Filler One Strike is supplied ready to use - no mixing is required.

Application Method /
Tools
Apply direct from pail with spatula/spreader. Smooth over surface and allow drying. Sanding is not normally required although the product may be sanded if required.
Sika® Filler One Strike can be painted over after approx. 30 minutes using water based paints. Leave to dry for 12 hours when using solvent based paints. Cleaning of Tools Clean all tools and application equipment with water immediately after use.
Hardened / cured material can only be mechanically removed.

Waiting Time /
Overcoating
Drying Time:
Note:
~ 30 minutes at 20°C
The drying time correspond to thin layer thickness. If deep holes or cracks are filled, longer time is required in order for the product to harden in its full thickness.

Notes on Application /
Limitations
• Do not use to fill plastic or metals.
• Do not apply when rain is imminent (external use).
• Do not apply in temperatures (ambient and surface) below 5°C.
• If using externally overpainting is essential