In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Quick Setting Single Use Epoxy Adhesive is the perfect product to use when you need to get your project pieces in place fast. This product sets in only 5 minutes.
Pacer Technology Super Glue Quick Setting Epoxy (SY-QS, SYQS8, T-QS, 15250, 15350) works best on:
All-Purpose
Ceramic
Metal
Pottery
Wood
Tile
Crafts
Fabric
Properties:
Initial colour: Clear hazy to light yellow
Final colour: Light yellow
Set Time: 4-6 minutes @ 65-80F
Handling Time: After 30 minutes
Full Strength: 24 hours
Maximum Gap:25"
Hardness, Shore D: 75-83 (After full cure)
Shear Strength, Steel: 1200 psi ( 20%)
Operating Temperature Range: -40oF to +176oF (-40oC to +80oC)
Use:
1. Surfaces should be clean and dry, free of oil and grease.
2. Roughen surfaces with emery cloth or sandpaper for best results.
3. Dispense from containers following package directions and mix thoroughly approximately 1 minute.
4. Apply mixed epoxy to both surfaces and mate parts together.
5. Remove excess epoxy immediately with denatured alcohol.
6. Sets in 4-6 minutes at room temperature (77F or 25C) with full cure in 24 hours.
Sold Out
Express Post: 1-3 Days | Standard Post: 2-5 Days
Instant Setting Epoxy Adhesive is the perfect product to use when you need to get your project pieces in place fast. This product sets in only 90 seconds
Pacer Technology Super Glue 90 Second Instant Epoxy Adhesive (SY-IN, 15353) works best on:
• All Purpose
• Ceramic
• Glass
• Wood
• Leather
• Fiberglass
• Metals
• Most Plastics
Properties:
Initial color: Clear to amber Mix Ratio (parts by volume): 1:1
Final color: Light yellow Maximum Gap: .25”
Set Time: 90 Seconds @ 65-80F Hardness, Shore D: 75-85 (After full cure)
Handling Time: After 10 minutes Shear Strength, Steel: 2000 psi (± 20%)
Full Strength: 24 hours Operating Temperature Range:-400 to 1400F (-400 to 600C)
Use:
1. Surfaces should be clean and dry, free from oil and grease.
2. Roughen surfaces with emery cloth or sandpaper for best results.
3. Dispense from container following package directions and mix thoroughly until color is uniform.
4. Apply to both surfaces and mate parts together.
5. Remove excess epoxy immediately with denatured alcohol.
6. Sets in 90 seconds at room temperature (77F or 25C) with full cure in 24 hours.
STORAGE AND SHELF LIFE
After use, wipe tips to remove residual product and reseal container. Store upright, with tips up, in a cool, dry location. Stored under these conditions, a one-year shelf life can be expected.
Sold Out
Express Post: 1-3 Days | Standard Post: 2-5 Days
Blue, removable Thread Locker prevents threaded metal fasteners, nuts, bolts, and screws from loosening. Thread Locker is an advanced anaerobic adhesive.
Pacer Technology Super Glue Blue Threadlocker (15190) is a premium grade product used to lock or seal metal threaded components or for metal fasteners up to ¾” in diameter. This product prevents loosening due to high vibration. Parts can be disassembled with simple hand tools.
PROPERTIES: Appearance – blue liquid with mild odor.
USE INSTRUCTIONS: For best results, parts should be clean and dry. Apply a bead around the part to be bonded & assemble with a twisting motion to spread adhesive. Allow to cure 24 hours for maximum strength. Excess adhesive on outside of parts will not cure and can be removed with a solvent-soaked cloth.
STORAGE AND SHELF LIFE
Recap for storage. A one-year shelf life can be expected.
SAFETY AND HANDLING PRECAUTIONS
CAUTION: IRRITATING TO EYES AND SKIN. Contains methacrylate esters and cumene hydroperoxide. Avoid contact with eyes and skin. May cause skin dermatitis on prolonged contact with sensitive individuals. In case of eye contact, rinse immediately with plenty of water and seek medical advice. Wash skin thoroughly with soap and water after use. Seek medical advice if skin irritation persists.KEEP OUT OF REACH OF CHILDREN.
Sold Out
Express Post: 1-3 Days | Standard Post: 2-5 Days
Super Glue Glass Adhesive securely attaches items to windows and mirrors. This product works well with glass beads, stemware and clear glass windows. It is water resistant, dries crystal clear, and cures after 10 minutes following direct UV exposure
Works best on Glass to Ceramic Glass to Glass Glass to Metal Glass to Plastic
Properties
-Initial colour: Clear
-Set Time: 2-5 seconds in sunlight or 150mw/cm2, 200 watt/in UV bulb @ 240-400nm or 100mw/cm2, 150 watt Halogen bulb @ 400+ nm.
-Final colour: Clear
-Handling Time: 10 minutes
-Full Strength: 24 hours
-Operating Temperature Range: -400 to 1500F (-400 to 660C)
Use Instructions: Use in a well-ventilated area. Avoid direct skin contact.
1. Surfaces should be clean, dry and close fitting. Glass Adhesive will fill small gaps.
2. Wipe surfaces with nail polish remover (acetone) or rubbing alcohol (isopropanol). Allow drying at least 20 minutes.
3. Uncap the syringe. The adhesive must be shielded from UV light during application to avoid premature curing. Use adhesive sparingly, using enough to just cover one surface to be bonded.
4. Join parts, making sure that they are correctly positioned. Wipe off excess adhesive before exposure using a clean cloth with mineral spirits or acetone.
5. Expose joined parts to UV sunlight or halogen lamp. In strong sunlight, a clear bond develops in 30 seconds. For cloudy conditions, allow 1-2 minutes. Bond strength continues to develop over 24 hours.
6. Excess cured adhesive can be removed with a blade.
7. After use, wipe syringe tip and recap. Store upright.
NOTE: Clear Glass Adhesive is not suitable for bonding parts exposed to oven temperatures or for deep coloured stained glass applications.
Storage And Sheld Life
-Store in a cool area away from sunlight or heat. Protect from freezing. Stored under these conditions, a one-year shelf life can be expected.
SAFETY AND HANDLING PRECAUTIONS
Contains Urethane acrylate oligomer, acrylate ester & acrylic acid. May cause an allergic skin reaction. Eye, skin and respiratory irritant. Use and store in a well-ventilated area. For eye contact, flush with water for 15 minutes and get medical attention. Wash skin thoroughly with soap & water after use. KEEP OUT OF REACH OF CHILDREN.
Sold Out
Express Post: 1-3 Days | Standard Post: 2-5 Days
Contact Cement is a flexible acrylic contact adhesive used to bond tile, rubber, wood, metal, formica, most plastics and much more.
Pacer Technology Super Glue Contact Cement (T-CC) is a single component flexible acrylic contact adhesive that remains flexible after cure and is best used for:
• Tile
• Rubber
• Wood
• Metal
• Masonite
• Particle Board
• Plywood
• Leather
• Formica
• Plastic
• Laminates
PROPERTIES:
Initial Color: Amber Dry Time: 30 minutes
Final Color: Amber Full Strength: 24 hours
Open Time: 10 minutes Operating Temperature Range: 15° to 150°F -9° to 66°C
Instructions:
Use in a well-ventilated area.
1. Surfaces should be clean and dry. For best results, use fine sandpaper to roughen the surface.
2. Apply Contact Cement to both surfaces and wait 10 minutes.
3. Press parts together. Clamp heavier parts together. Allow 30 minutes for drying time.
4. For optimum strength in all applications, wait 24 hours before using the repaired object.
5. Clean off tube or bottle top and tightly cap adhesive. Store upright and away from heat sources.
Note: Solvents may evaporate from bottle or tube if left open for prolonged periods.
Storage:
Store in a cool area away from sunlight or heat. Stored under these conditions, a one-year shelf life can be expected.
Safety:
Contains methyl ethyl ketone, hexane and ethyl acetate. Warning – liquid adhesive is extremely flammable. Harmful or fatal if swallowed. Injurious to eyes with direct contact. Avoid prolonged breathing of vapours and prolonged skin contact. Wear suitable protective clothing and gloves. Use and store in a well-ventilated area away from heat, sparks or flame. In case of eye contact, flush with water for 15 minutes and seek medical advice. If swallowed, contact a physician immediately and show the container label. Wash hands & skin with soap and water after use. KEEP OUT OF REACH OF CHILDREN.
Sold Out
Express Post: 1-3 Days | Standard Post: 2-5 Days
Quick Setting Single Use Epoxy Adhesive is the perfect product to use when you need to get your project pieces in place fast. This product sets in only 5 minutes.
Works best on:
All-Purpose
Ceramic
Metal
Pottery
Wood
Tile
Crafts
Fabric
Properties:
Initial colour: Clear hazy to light
yellow
Final colour: Light yellow
Set Time: 4-6 minutes @ 65-80F
Handling Time: After 30 minutes
Full Strength: 24 hours
Maximum Gap:25"
Hardness, Shore D: 75-83 (After full cure)
Shear Strength, Steel: 1200 psi ( 20%)
Operating Temperature Range: -40o
F to +176oF (-40oC to +80oC)
Instructions:
1. Surfaces should be clean and dry, free of oil and grease.
2. Roughen surfaces with emery cloth or sandpaper for best results.
3. Dispense from containers following package directions and mix thoroughly approximately 1 minute.
4. Apply mixed epoxy to both surfaces and mate parts together.
5. Remove excess epoxy immediately with denatured alcohol.
6. Sets in 4-6 minutes at room temperature (77F or 25C) with full cure in 24 hours.
Storage:
After use, wipe tips to remove residual product and reseal the container. Store upright, with tips up, in a cool, dry location. Stored under these conditions, a one-year shelf life can be expected.
Safety:
Contains Epoxy resin & Mercaptan hardener. May cause eye/skin irritation with direct contact. In case of direct eye contact, flush with water for 15 minutes and consult a physician. Wash hands and skin thoroughly with soap and water after use. If swallowed, seek medical advice immediately and show container label. Keep out of reach of children.
Sold Out
Express Post: 1-3 Days | Standard Post: 2-5 Days
Fix-All Adhesive is a great all-purpose solvent glue and sealer. It seals and repairs almost any surface easily and quickly. A great product for gluing wood, fabric, brick, canvas, and concrete. Also repairs tears and helps fill cracks and holes.
Pacer Technology Super Glue Fix-All Adhesive (T-FA) is a single component adhesive that glues, seals and repairs and is best used for:
• Metal
• Plastics
• Ceramics
• Wood
• Glass
• Rubber
• Fabrics
• Brick
• Leather
• Canvas
• Concrete
• China
• Vinyl
• Porous materials
• Non-Porous
materials
Properties:
Initial colour: Clear
Final colour: Clear to light yellow
Open Time: 10 minutes
Dry Time: 30 minutes
Handling Time: 3 hours
Full Strength: 24 hours
Operating Temperature Range: -200 to 1500F (-290 to 660C)
Instructions:
Use in a well-ventilated area. Protect work surfaces.
As a glue: Apply to both surfaces and let dry 10 minutes. Press parts together. Full cure in 24 hours. For rough, uneven or very porous surfaces, apply a thick layer to both surfaces and wait 30 minutes before joining parts.
As a sealer: Fill crack or hole with extra amounts of Fix-All and allow to dry. Add additional adhesive as needed.
For repair: To repair vinyl, rubber or fabric tears, apply Fix-All with a spatula behind, through and above the tear. Hold sides together using a strong piece of tape across the tear to hold it tightly. Remove tape after 3 hours. Remove excess with a rubber eraser. Note: when thick layers are required it is better to apply a number of thin coats. Allow curing for 3 hours before handling. Full cure in 24 hours.
Notes: Solvents may evaporate from bottle or tube if left open for prolonged periods. Not recommended for Teflon, Polyethylene or Polypropylene bonding. Avoid constant submergence in water and exposure to extremely high temperatures after cure.
Storage: Store in a cool area away from sunlight or heat. Stored under these conditions, a one-year shelf life can be expected.
Safety:
Contains xylene, naphtha and ethylbenzene. DANGER: liquid adhesive is Extremely Flammable. Harmful or fatal if swallowed. Vapour harmful. Avoid breathing vapours. Use and store in a well-ventilated area away from heat, sparks or flame. May cause eye/skin irritation. In case of eye contact, flush with water for 15 minutes and seek medical advice. If swallowed, contact a physician immediately and show the container label. Wash hands & skin with soap and water after use. KEEP OUT OF REACH OF CHILDREN.
Sold Out
Express Post: 1-3 Days | Standard Post: 2-5 Days
This new, innovative dispensing system allows for accurate control while utilizing an advanced formula of the Super Glue Corporation's signature product cyanoacrylate (Super Glue GEL). The easy to hold applicator design allows for either continuous stream or single drop control. No more sticky fingers! This glue works great when adhering to porous or vertical surfaces. It will not drip or run!
Works best on: Aluminum Ceramic China Hard & Soft Wood Jewelry Metal Most Plastics Pottery Rubber Vinyl
Pacer Technology AccuTool Gel (19026) is a quick-setting, non-sagging gel adhesive that fills gaps & works best on:
Leather
Metal
Vinyl
Rubber
Most plastics
Aluminium
Ceramics
Hard & Soft Wood
China
Pottery
Jewellery
Fingernails
NOTE: Not for use with Teflon, polyethylene, polypropylene, certain silicone rubber types, glass, rearview mirrors or parts that are subjected to great shock or continuous immersion in water.
Properties:
Initial colour: Clear, transparent
Final colour: Clear
Set time: 10-30 seconds
Full Strength: 24 hours
Operating Temperature Range: -650 to 1800 F (-540 to 820C)
Use: For best results, items should fit closely together.
1. Protect clothing and work surfaces (metal foil works well). Use in a well-ventilated area. Refer to package for special opening instructions – has Self Piercing “Ratchet” Opener. After opening, remove the outer cap for use.
2. Apply sparingly to one surface using 1 drop per square inch. Assemble parts and hold together with pressure for 15 seconds or until set.
3. After use, wipe tip before replacing cap to prevent sticking and close bottle securely.
Storage and Shelf Life:
Store upright in a cool area away from sunlight or heat sources. Stored under these conditions, a one-year shelf life can be expected.
Safety:
Contains cyanoacrylate. CAUTION: Eye Irritant. Bonds skin & eyes in seconds. Use with adequate ventilation. Avoid contact with clothing as can cause a burn. In case of eye contact, flush with water for 15 minutes; get medical attention for eye or internal contact. To remove from skin, soak in acetone nail polish remover & gently peel adhesive off with a fingernail; water exposure will wear off residual adhesive in a few days (do not use polish remover around the eye area).
KEEP OUT OF REACH OF CHILDREN.
Sold Out
Express Post: 1-3 Days | Standard Post: 2-5 Days
HandiTAK® is non-toxic, acid and lignin free. This reusable adhesive replaces tape, pushpins and tacks. It works on most surfaces and is great for securing pictures, keys, pens and lots of other items. Simply knead a small piece of HandiTAK® into a ball, place it between surfaces to be fastened and press firmly.
Works best on: China, Crystal, Greeting Cards, Notes, Party Decorations, Posters, Straighten Pictures, Telephone, Pads
Pacer Technology Super Glue’s HandiTak (HT, HT2) is a non-toxic (conforms to ASTM D-4236) reusable adhesive that replaces tape, pushpins and tacks and works on most surfaces.
Properties: Appearance - yellow rubber-based mounting tape with a mild odour. (Note: contains a synthetic rubber ingredient with no natural latex).
Instructions:
1. Knead a small piece of HandiTak into a ball, place it between surfaces to be fastened, and press firmly.
2. To remove HandiTak, gently roll product into a ball and lift from the surface. Use the ball to aid in removing any remaining product.
SAFETY AND HANDLING PRECAUTIONS
Contains rubber-based hydrocarbon mixture. Caution: HandiTak may leave some oily residue on some surfaces. If this happens, use Lighter Fluid or mineral spirits to remove residue. Do not use HandiTak on soft-flocked wallpaper, newly painted surfaces, or for hanging heavy objects such as mirrors and framed pictures. Avoid prolonged skin contact.
Sold Out
Express Post: 1-3 Days | Standard Post: 2-5 Days
High-Performance Future Glue® works exceptionally well with tough jobs.
Surfaces do not need to be cleaned! Its powerful adhesive formula works on dirty, greasy surfaces, and resists high and low temperatures as well as most chemicals. Its instant bonding power can be used for almost all porous and non-porous materials. The medium viscosity penetrates into preassembled and close-fitting parts.
Works best on Aluminum Ceramic China Corkboard Hard & Soft Wood Jewelry Leather Metal Most Plastics Porcelain Pottery Rubber
Properties
Initial colour Clear, transparent
Final color: Clear
Set time: 10-30 seconds
Full Strength: 24 hours
Operating Temperature Range: -65 to 180 F (-54 to 82 C)
USE INSTRUCTIONS
For best results, surfaces should be clean and dry.
1. Protect clothing and work surfaces (metal foil works well). Use in a well-ventilated area. Carefully follow tube-opening directions on package. Unscrew cap while keeping tube pointed away from the face.
2. Apply to one surface, using 1 drop per square inch of surface. Assemble parts and hold together with pressure for 15 seconds or until set.
3. Wipe the top of nozzle if the adhesive has accumulated before recapping tube securely after use.
STORAGE AND SHELF LIFE:
Store upright in a cool area away from sunlight or heat sources. Stored under these conditions, a one-year shelf life can be expected.
SAFETY AND HANDLING PRECAUTIONS
Contains cyanoacrylate. CAUTION: Eye Irritant. Bonds skin & eyes in seconds. Use with adequate ventilation. Avoid contact with clothing as can cause a burn. In case of eye contact, flush with water for 15 minutes; get medical attention for eye or internal contact. To remove from skin, soak in acetone nail polish remover & gently peel adhesive off with a fingernail; water exposure will wear off residual adhesive in a few days (do not use polish remover around the eye area). KEEP OUT OF REACH OF CHILDREN.
Sold Out
Express Post: 1-3 Days | Standard Post: 2-5 Days
High Performance Future Glue® Brush-On evenly and safely coats most surfaces while eliminating skin contact. Perfect for small and large surfaces needing a thorough coat of Future Glue®. Its instant bonding power can be used for almost all porous and non-porous materials. Its powerful adhesive formula works on dirty, greasy surfaces, and resists high and low temperatures as well as most chemicals.
Pacer Technology Super Glue’s Future Glue Brush-On (14204, 15099, 15111) is a quick-setting adhesive that works on oily & dirty surfaces to bond materials, such as:
Jewelry
Metal
Leather
Ceramic
Most Plastics
Rubber
Aluminum
China
Porcelain
Hard & soft wood
Pottery
NOTE: Not for use with Teflon, polyethylene, polypropylene, certain silicone rubber types, glass, rear view
mirrors or parts that are subjected to great shock or continuous immersion in water.
Properties:
Initial colour: Clear, transparent
Final colour: Clear
Set time: 10-30 seconds
Full Strength: 24 hours
Operating Temperature Range: -650 to 1800F (-540 to 820 C)
Use:
For best results, surfaces should be clean and dry.
1. Protect clothing and work surfaces (metal foil works well). Use in a well-ventilated area. Carefully follow tube-opening directions on package. Unscrew cap while keeping tube pointed away from the face.
2. Apply to one surface, using 1 drop per square inch of surface. Assemble parts and hold together with pressure for 15 seconds or until set.
3. Wipe the top of nozzle if the adhesive has accumulated before recapping tube securely after use.
STORAGE AND SHELF LIFE:
Store upright in a cool area away from sunlight or heat sources. Stored under these conditions, a one-year shelf life can be expected.
SAFETY AND HANDLING PRECAUTIONS
Contains cyanoacrylate. CAUTION: Eye Irritant. Bonds skin & eyes in seconds. Use with adequate ventilation. Avoid contact with clothing as can cause a burn. In case of eye contact, flush with water for 15 minutes; get medical attention for eye or internal contact. To remove from skin, soak in acetone nail polish remover & gently peel adhesive off with a fingernail; water exposure will wear off residual adhesive in a few days (do not use polish remover around the eye area). KEEP OUT OF REACH OF CHILDREN.
Sold Out
Express Post: 1-3 Days | Standard Post: 2-5 Days
A handy Super Glue pen with unique press tabs, for steady flow or drop-at-a-time application, is great to have with you at home or on the road. Great when you're looking for a precise application. Best used with non-porous application parts such as metal and rubber. The glue bonds instantly and sets in seconds!
NOTE: Not for use with Teflon, polyethylene, polypropylene, certain silicone rubber types, glass, rearview mirrors or parts that are subjected to great shock or continuous immersion in water. Not for porous materials such as paper, fabric or foam rubber.
Properties:
Initial colour: Clear, transparent
Final colour: Clear
Set time: 10-30 seconds
Full Strength: 24 hours
Operating Temperature Range: -650 to 1800F (-540 to 820C)
Instructions:
NOTE: For best results, surfaces should be clean & dry and parts should mate well.
1. Protect clothing and work surfaces (metal foil works well). Use in a well-ventilated area. Keep pen tip away from face and body. Follow directions on the card for proper opening steps.
2. Apply to one surface, using 1 drop per square inch of surface. Do not spread glue with fingers – use applicator nozzle tip. Assemble parts and hold together with pressure for 15 seconds or until set.
3. Wipe tip if the adhesive has accumulated before inserting a pin in the end of tube securely after use. STORAGE AND SHELF LIFE: Replace outer cap and store upright in a cool area away from sunlight or heat sources. Stored under these conditions, a one-year shelf life can be expected.
Safety:
Contains cyanoacrylate. CAUTION: Eye Irritant. Bonds skin & eyes in seconds. Use with adequate ventilation. Avoid contact with clothing as can cause burns. In case of eye contact, flush with water for 15 minutes; get medical attention for eye or internal contact. To remove from skin, soak in acetone nail polish remover & gently peel adhesive off with a fingernail; water exposure will wear off residual adhesive in a few days (do not use polish remover around the eye area). KEEP OUT OF REACH OF CHILDREN.
Sold Out
Express Post: 1-3 Days | Standard Post: 2-5 Days
The Permanent Patch is a very unique, easy-to-use UV or sunlight activated repair patch. It is fiberglass-reinforced polyester and creates long-lasting repairs. No mixing is required - one step no mess. This incredible permanent patch is waterproof and will not rot or rust. It can be drilled, tapped, sanded and painted in less than an hour. The Permanent Patch makes long lasting repairs on Everything Under The Sun™.
Works best on Aluminum Concrete Drywall Fiberglass Metal Most Plastics Pottery PVC Pipe Rubber Stucco Wood
USE INSTRUCTIONS: NOTE - This product must be exposed to UV sunlight or UV source to cure. Rubber or plastic gloves recommended for sensitive individuals. Not recommended for drinking water applications.
1. Use the Anchor-Tite Patch in a well-ventilated area. Keep the Patch in the black, UV-protected package until you are ready to do a repair.
2. Clean parts to be repaired with soap & water and allow to dry completely. Roughen surface with wire brush or sandpaper.
3. While still in the black UV-protected package, cut the patch material to extend ¾” beyond the repair area using scissors or knife. Remove the white backing and apply cut Patch over repair and press firmly in place. Store unused portion away from sunlight or UV sources. If outside surface is to be painted or finished, remove clear nylon film prior to cure.
4. Expose the bonded Patch to UV sunlight, black lamp or other UV sources until the product is hardened (see approximate times above).
5. After the product is hard and fully cured, it can be drilled, sanded or painted.
6. Wash hands and skin well with soap and water after use.
STORAGE AND SHELF LIFE
Store product sealed in the original black UV-protected package in a cool (<75F), dry location away from UV sources or sunlight. Stored under these conditions, a one-year shelf life can be expected.
SAFETY AND HANDLING PRECAUTIONS
Contains Styrene. Eye, skin & respiratory irritant. Use & store in a well-ventilated area away from heat & sunlight.
Avoid contact with eyes & skin. Do not ingest. Wash hands & skin with soap and water after use. If eye contact occurs, flush with water for 15 minutes & get medical attention. With skin contact, if irritation persists, get medical attention. If swallowed, do not induce vomiting; get immediate medical attention & show container label. KEEP OUT OF REACH OF CHILDREN.
Sold Out
Express Post: 1-3 Days | Standard Post: 2-5 Days
Red, permanent Thread Locker prevents loosening by filling in the inner spaces in threaded metal parts to form a tough solid assembly.
Pacer Technology Super Glue Red Threadlocker (15191) is a high strength premium grade product used to permanently lock or seal metal threaded components or for metal fasteners up to 1” in diameter. Also prevents loosening due to high vibration.
Appearance – red liquid with mild odour.
Use Instructions: For best results, parts should be clean and dry. Apply a bead around the part to be bonded & assemble with a twisting motion to spread adhesive. Allow curing 24 hours for maximum strength. The excess adhesive on the outside of parts will not cure and can be removed with a solvent-soaked cloth.
Storage and shelf life: Recap for storage. A one-year shelf life can be expected.
CAUTION: IRRITATING TO EYES AND SKIN. Contains methacrylate esters and cumene hydroperoxide. Avoid contact with eyes and skin. May cause skin dermatitis on prolonged contact with sensitive individuals. In case of eye contact, rinse immediately with plenty of water and seek medical advice. Wash skin thoroughly with soap and water after use. Seek medical advice if skin irritation persists.
KEEP OUT OF REACH OF CHILDREN.
Sold Out
Express Post: 1-3 Days | Standard Post: 2-5 Days
Extreme temperatures take a toll on rearview mirrors. After a bitter cold winter or hot summer, they tend to fall off. Our Rear View Mirror Adhesive is formulated to be strong and quick—enabling you to have your rear view mirror reattached in minutes.
Works best on Glass to Glass Glass to Metal Metal to Metal
Pacer Technology Super Glue’s Rear View Mirror Adhesive (14104, 15193) is a two-part system used for bonding rear view mirror brackets to windshields and for:
Glass to metal Glass to glass Metal to metal
Properties:
Appearance: Part A – Activator/Accelerator – light blue transparent liquid
Part B – Adhesive – yellow liquid adhesive
Tensile Shear Strength (steel to steel): 2000 – 3000 psi
Directions:
Use in a well-ventilated area. Mark location on the outside of windshield with a removable marker. Make sure bracket is positioned correctly. Refer to the card for proper opening instructions.
1. Apply Activator to both surfaces. Allow 1 minute to dry.
2. Apply 2 drops of adhesive to the metal surface to be bonded.
3. Mate parts together using sufficient pressure to spread adhesive. Hold parts together firmly for 1 minute. Allow 1 hour before handling. Full strength develops in 24 hours. For optimum results, wait overnight before attaching the mirror to a bracket.
Storage:
Store in a cool area away from sunlight or heat. Stored under these conditions, a one-year shelf life can be expected.
Safety:
Activator – Contains isopropyl alcohol. CAUTION: Flammable. Irritating to eyes. Mild skin irritant. Do not ingest. If swallowed seek medical advice immediately and show this container label. Use and store in a well-ventilated area. KEEP OUT OF REACH OF CHILDREN.
Adhesive – Contains methacrylate esters and acrylic acid. CAUTION: Irritating to eyes and skin. May cause sensitization by skin contact. Avoid contact with skin & eyes. In case of eye contact, rinse immediately with water for 15 minutes and seek medical advice. For skin contact, wash well with soap and water. If swallowed seek medical advice immediately and show this container label. KEEP OUT OF REACH OF CHILDREN.
Sold Out
Express Post: 1-3 Days | Standard Post: 2-5 Days
Our Quick Setting Gel Epoxy Adhesive is the perfect product to use when you need to get your project pieces in place fast. This product fills gaps and covers large porous surfaces. The final cure colour is cream but can be mixed with paint to colour match. This product sets in only 5 minutes.
Works best on:
• Porous materials
• Ceramic
• Metal
• Pottery
• Wood
• Tile
• Crafts
Properties:
Initial colour: Green resin/white hazy hardener Maximum Gap: .25”
Final colour: White hazy Hardness, Shore D: 75-85 (After full cure)
Set Time: 4-6 minutes @ 65-80F Shear Strength, Steel: 1500 psi (± 20%)
Handling Time: After 1 hour Aluminum: 900 psi (± 20%)
Full Strength: 24 hours Operating Temperature Range:-320 to 3000F (-360 to 1490C)
Instructions:
1. Surfaces should be clean and dry, free from oil and grease.
2. Roughen surfaces with emery cloth or sandpaper for best results.
3. Dispense from container following package directions & mix thoroughly approximately 1 minute. Use package blister or clean cardboard for mixing container, do not use metal.
4. Apply to both surfaces and mate parts together.
5. Remove excess epoxy immediately with denatured alcohol.
6. Sets in 4-6 minutes at room temperature (77F / 25C) with full cure in 24 hours.
Helpful Hints:
To colour Epoxy Gel, do test sample using mixed epoxy with added small amounts of colourant, such as paint (latex or oil), stain or tint. Mix well & apply to scrap piece of wood. Let dry to compare the final colour to the color of repair item. Keep testing until a colour match is achieved, then mix the appropriate amount of colourant with Epoxy Gel and bond repair item.
Sold Out
Express Post: 1-3 Days | Standard Post: 2-5 Days
Blue, removable Thread Locker prevents threaded metal fasteners, nuts, bolts, and screws from loosening. Thread Locker is an advanced anaerobic adhesive.
Pacer Technology Super Glue Blue Threadlocker (15190) is a premium grade product used to lock or seal metal threaded components or for metal fasteners up to ¾” in diameter. This product prevents loosening due to high vibration. Parts can be disassembled with simple hand tools.
PROPERTIES: Appearance – blue liquid with mild odor.
USE INSTRUCTIONS: For best results, parts should be clean and dry. Apply a bead around the part to be bonded & assemble with a twisting motion to spread adhesive. Allow to cure 24 hours for maximum strength. Excess adhesive on outside of parts will not cure and can be removed with a solvent-soaked cloth.
STORAGE AND SHELF LIFE
Recap for storage. A one-year shelf life can be expected.
SAFETY AND HANDLING PRECAUTIONS
CAUTION: IRRITATING TO EYES AND SKIN. Contains methacrylate esters and cumene hydroperoxide. Avoid contact with eyes and skin. May cause skin dermatitis on prolonged contact with sensitive individuals. In case of eye contact, rinse immediately with plenty of water and seek medical advice. Wash skin thoroughly with soap and water after use. Seek medical advice if skin irritation persists. KEEP OUT OF REACH OF CHILDREN.
Sold Out
Express Post: 1-3 Days | Standard Post: 2-5 Days
Single Use Waterproof Epoxy Adhesive is the perfect product to use when you need to do any marine or waterproof projects. It works under or in the presence of water and remains waterproof. Package contains just the right amount of product for most small projects. The metal tubes dispense effortlessly and are easy to mix. This product sets in only 3-4 hours.
Sold Out
Express Post: 1-3 Days | Standard Post: 2-5 Days
Original formula Super Glue forms the strongest bonds in tight joints between clean breaks or smooth surfaces. Best used with non-porous application parts such as metal and rubber. The glue bonds instantly and sets in seconds! Packaged in a 20-gram break-away tip bottle this product is ideal for larger projects that require greater amounts of Super Glue.
Works best on:
Metal
Rubber
Most Plastics
Aluminium
Ceramic
China
Wood
Pottery
Jewellery
NOTE: Not for use with Teflon, polyethylene, polypropylene, certain silicone rubber types, glass, rear view
mirrors or parts that are subjected to great shock or continuous immersion in water. Not for porous
materials such as paper, fabric or foam rubber.
Properties:
Initial colour: Clear, transparent
Final colour: Clear
Set time: 10-30 seconds
Full Strength: 24 hours
Operating Temperature Range: -650 to 1800F (-540 to 820C)
USE INSTRUCTIONS: NOTE: For best results, surfaces should be clean & dry and parts should mate well.
1. Protect clothing and work surfaces (metal foil works well). Use in a well-ventilated area. Keep container pointed away from face and body. Carefully follow opening directions on package. Unscrew cap while keeping container pointed away from the face.
2. Apply to one surface, using 1 drop per square inch of surface. Do not spread glue with fingers – use applicator nozzle tip. Assemble parts and hold together with pressure for 15 seconds or until set.
3. Wipe tip if the adhesive has accumulated before resealing cap securely.
Storage:
Replace outer cap and store upright in a cool area away from sunlight or heat sources. Stored under these conditions, a one-year shelf life can be expected.
Safety:
Contains cyanoacrylate. CAUTION: Eye Irritant. Bonds skin & eyes in seconds. Use with adequate ventilation. Avoid contact with clothing as can cause burn. In case of eye contact, flush with water for 15 minutes; get medical attention for eye or internal contact. To remove from skin, soak in acetone nail polish remover & gently peel adhesive off with a fingernail; water exposure will wear off residual adhesive in a few days (do not use polish remover around the eye area). KEEP OUT OF REACH OF CHILDREN.
Sold Out
Express Post: 1-3 Days | Standard Post: 2-5 Days
Super Glue gel's thick viscosity is perfect for clean, vertical, porous (wood, hard leather and porcelain) surfaces. Gels allow for a more accurate application as they do not drip or run.
Works best on:
Leather
Metal
Vinyl
Rubber
Most plastics
Aluminum
Ceramics
Hard & Soft Wood
China
Pottery
Jewelry
NOTE: Not for use with Teflon, polyethylene, polypropylene, certain silicone rubber types, glass, rear view mirrors or parts that are subjected to great shock or continuous immersion in water.
Properties:
Initial color: Clear, transparent
Final color: Clear
Set time: 10-30 seconds
Full Strength: 24 hours
Operating Temperature Range: -650 to 1800F (-540 to 820C)
Use: NOTE: For best results, surfaces should be clean and dry and items should fit together well.
1. Protect clothing and work surfaces (metal foil works well). Use in a well-ventilated area. Carefully follow tube-opening directions on package. Unscrew cap while keeping tube pointed away from the face.
2. Apply to one surface, using 1 drop per square inch of surface. Assemble parts and hold together with pressure for 15 seconds or until set.
3. Wipe the top of nozzle if the adhesive has accumulated before recapping tube securely after use.
Storage: Store upright in a cool area away from sunlight or heat sources. Stored under these conditions, a one-year shelf life can be expected.
Safety:
Contains cyanoacrylate. CAUTION: Eye Irritant. Bonds skin & eyes in seconds. Use with adequate ventilation. Avoid contact with clothing as can cause burn. In case of eye contact, flush with water for 15 minutes; get medical attention for eye or internal contact. To remove from skin, soak in acetone nail polish remover & gently peel adhesive off with fingernail; water exposure will wear off residual adhesive in a few days (do not use polish remover around the eye area). KEEP OUT OF REACH OF CHILDREN.
Sold Out
Express Post: 1-3 Days | Standard Post: 2-5 Days
Original formula Super Glue forms the strongest bonds in tight joints between clean breaks or smooth surfaces. Best used with non-porous application parts such as metal and rubber. The glue bonds instantly sets in seconds and is packaged in a long lasting 2-gram tube. The extra slim card is perfect for tight displays, end-caps and clip strips.
Pacer Technology Super Glue is a quick-setting adhesive that bonds strongly and works best on:
Metal
Rubber
Most Plastics
Aluminium
Ceramic
China
Wood
Pottery
Jewellery
NOTE: Not for use with Teflon, polyethylene, polypropylene, certain silicone rubber types, glass, rearview mirrors or parts that are subjected to great shock or continuous immersion in water. Not for porous materials such as paper, fabric or foam rubber.
Properties:
Initial colour: Clear, transparent
Final colour: Clear
Set time: 10-30 seconds
Full Strength: 24 hours
Operating Temperature Range: -650 to 1800F (-540 to 820C)
Use: NOTE: For best results, surfaces should be clean & dry and parts should mate well.
1. Protect clothing and work surfaces (metal foil works well). Use in a well-ventilated area. Keep container
pointed away from face and body. Carefully follow opening directions on package. Unscrew cap while
keeping container pointed away from the face.
2. Apply to one surface, using 1 drop per square inch of surface. Do not spread glue with fingers – use
applicator nozzle tip. Assemble parts and hold together with pressure for 15 seconds or until set.
3. Wipe tip if the adhesive has accumulated before resealing cap securely.
Storage: Replace outer cap and store upright in a cool area away from sunlight or heat sources. Stored under these conditions, a one-year shelf life can be expected.
Safety:
Contains cyanoacrylate. CAUTION: Eye Irritant. Bonds skin & eyes in seconds. Use with adequate ventilation. Avoid contact with clothing as can cause burn. In case of eye contact, flush with water for 15 minutes; get medical attention for eye or internal contact. To remove from skin, soak in acetone nail polish remover & gently peel adhesive off with a fingernail; water exposure will wear off residual adhesive in a few days (do not use polish remover around the eye area). KEEP OUT OF REACH OF CHILDREN.
Sold Out
Express Post: 1-3 Days | Standard Post: 2-5 Days
The Original Super Glue® Corporation's newest product is the ACCUTOOL® . The ACCUTOOL® has a revolutionary, easy to hold design and features high-performance cyanoacrylate. The new ACCUTOOL® precisely applies the product where you want it, how you want it. You can get a continuous stream or drop-at-a-time application based on the amount of pressure you apply to the dispenser buttons. The Original Super Glue®: Fast. Easy. Effective.
Pacer Technology Super Glue’s AccuToolTM (19025) is a quick-setting adhesive in a precision applicator that works on oily & dirty surfaces to bond most porous and non-porous materials, such as:
Metal
Leather
Ceramic
Wood
Fabric
Most plastics
Porcelain
Rubber
Fingernails
NOTE: Not for use with Teflon, polyethylene, polypropylene, certain silicone rubber types, glass, rearview mirrors or parts that are subjected to great shock or continuous immersion in water.
Properties:
Initial colour: Clear, transparent
Final colour: Clear
Set time: 10-30 seconds
Full Strength: 24 hours
Operating Temperature Range: -650 to 1800F (-540 to 820C)
Instructions:
NOTE: For best results, items should fit closely together.
1. Protect clothing and work surfaces (metal foil works well). Use in a well-ventilated area. Refer to package for special opening instructions – has Self Piercing “Ratchet” Opener. After
opening, remove outer cap for use.
2. Apply sparingly to one surface using 1 drop per square inch. Assemble parts and hold together with pressure for 15 seconds or until set.
3. After use, wipe tip before replacing cap to prevent sticking and close bottle securely.
Storage
Store upright in a cool area away from sunlight or heat sources. Stored under these conditions, a one-year shelf life can be expected.
Safety:
Contains cyanoacrylate. CAUTION: Eye Irritant. Bonds skin & eyes in seconds. Use with adequate ventilation. Avoid contact with clothing as can cause a burn. In case of eye contact, flush with water for 15 minutes; get medical attention for eye or internal contact. To remove from skin, soak in acetone nail polish remover & gently peel adhesive off with a fingernail; water exposure will wear off residual adhesive in a few days (do not use polish remover around the eye area). KEEP OUT OF REACH OF CHILDREN.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Timbermate Wood filler is an Interior grade 4 in 1 Wood Putty, Grain Filler, Edge Filler and Crack Filler. When thinned slightly with water can also be used as a sanding sealer. Timbermate does not shrink, sink, crack or fall out and has an indefinite shelf life. It is non-flammable, non-toxic and can be used to the last gram.
The secret ingredient of Timbermate is tap water, therefore, containing no Acrylic, Latex or Solvents. Timbermate comes in 13 premixed colours plus Natural Tint Base. Timbermate takes all types of known stains, varnishes and coatings. The Timbermate formula is over 85 years old and is the only genuine water-based formula in the world proving that the formulation has stood the test of time.
Features & Benefits of Timbermate
No Waste, Usable to the last drop. If tub dries out just add water to soften.
Won't Shrink, Sink, Crack or Fall Out.
Suitable for use in all Timbers including Particle Board M.D.F. (Custom Wood) *Plaster Board, Flooring, Panelling etc.
Can be used as Wood Putty, Sanding Sealer, Prime Coat, Grainfiller, Crackfiller, Undercoat & Edge Filler all in one.
Available in 13 Timber Tones plus Natural. Use White for top coats only.
Can be tinted in wet state or overstained when dry. Use any type of Colorant i.e. Water Based Spirit based ochers etc.
Easy sanding, will not clog paper when DRY Sanded dust can be mixed with water for re-use.
Fast drying approx. 20-30 min, but can be heat dried with a heat gun or lamp for faster drying. Temperature can affect drying time.
Clean hands or tools with water.
Non-Flammable, Non-Toxic, Non-Yellowing.
Solvent, Latex and Acrylic Free.
Heat Proof and Freezeproof.
Provides a strong foundation for all top coats inc. Single & two pack products polyurethane's, oils, acrylics, french polish wax etc.
Takes nails, screws, planing, sawing, drilling and routing
Can be used on Metal, Plastic, Fibreglass and in Foundries.
100% Australian Made and Owned.
Available in pack sizes of 250g, 500g, 2Kg, 8Kg, 20Kg and 200Kg.
Interior Grade.
Edgefiller
Apply TIMBERMATE with a spatula or knife using hand pressure to force into the Edge or End of the grain. For spray gun use stir 10%-15% water into TIMBERMATE fit a 2mm mozzle and set pressure to 60psi. Boards can be stacked for easy spraying. Allow to dry and sand with a fine grit paper and apply topcoat.
Woodfiller/Wood Putty
Fills cracks, knots, pin and screw holes, splits, blemishes, etc. Fill deep holes in layers allowing time for each layer to dry. Will not blind natural wood grain. Drying time is about 30 minutes. TIMBERMATE dries hard and smooth without shrinking or sinking and can be belt or drum sanded as it is not affected by heat, the hotter it gets the harder and faster it sets and that means less "Down Time."
You can speed dry TIMBERMATE by adjusting the surrounding air temperature. This can be done by using either hot air, heat lamps, or kiln ovens.TIMBERMATE can be mixed with any stains before or after the filler is dry. To match medium and darker shades mix with Natural, Pine or other light shades. Use white TIMBERMATE only for white top coats.
Grainfiller
Mix 10% to 15% water into TIMBERMATE to make a perfect Grainfiller, Sanding Sealer and Prime Coat all in one application. First sand surface and with fine grit sandpaper, then apply Grainfiller to surface with a spray gun, paint roller, hessian or a cloth rolled into a ball, rub across the grain in a circular motion finishing with the grain. Sand, once filler is dry, to perfection with either sandpaper or power sander, using a fine grit paper. Grain filer can be used in a Roller or Curtain Coater or Spray Gun using a 2mm nozzle and 60psi pressure. Can be further thinned down with water if required.
MDF
Due to the finishing system used to manufacture MDF, it is essential to seal the job with a water-based non-acrylic product before applying top coats. Therefore TIMBERMATE meets your needs.
Flooring
Preparing old floors: Scrape all dust and waste between boards and surface as well as from knot holes and nail heads, vacuum well and carry out first sanding to prepare for filling and coating. Ensure that floor is stabilised, dry and free of movement.
Application new floors and prepared old floors: Fill cracks, knot and nail holes and all blemished with a putty knife. Fill deeper holes in layers of about 6mm allowing each fill to dry. Apply TIMBERMATE to the entire floor, as a sealant, using a squeegee, trowel or paint roller. Allow to dry and sand off with a fine paper - 120 to 150 grit is recommended for best results. The floor can now be stained or varnished.
Frequently Asked Questions
Question: Is TIMBERMATE toxic, flammable or harmful?
Answer: It is advisable to carry out safe work practices, as you would when working with dust. (Use an approved dust mask and safety goggles). TIMBERMATE contains no harmful ingredients and is non-flammable.
Question: Can TIMBERMATE be used externally?
Answer: No, as TIMBERMATE® is resoluble in water it is not advisable to use it outdoors. TIMBERMATE IS RECOMMENDED FOR INTERIOR USE. For external use, we recommend Earls MulTFill, Powder Putty or Porion Flexible Filler.
Question: Can TIMBERMATE be used with stains and other finishes?
Answer: Yes, TIMBERMATE® will take all types of known stains, coatings and colourants which can be Water based, Oil based, Solvent or Spirit based and even Acid Catalysed Lacquers.
Question: Can TIMBERMATE be grainfilled?
Answer: Yes, TIMBERMATE is a non-solvent based filler and is ideal for grainfilling. Mix 10-15% hot water to thin the Timbermate, then rub over the grain or spread thinly (see below for more detailed instructions). TIMBERMATE will: *Not raise the grain *Not damage the grain TIMBERMATE is: *Easy to sand when dry *Easy to stain when dry *Heat proof so you can speed the drying time by heating with a hair dryer, heat gun, lights etc.
Question: How is the grainfiller applied?
Answer: Take some TIMBERMATE out of the tub and place it in a separate container. Add approximately 10-15% water, (1gm=1ml) and mix into a slurry like paste (like toothpaste). Use a LINT FREE CLOTH AND RUB ACROSS THE GRAIN. When grainfiller goes "whitish" and sands off easily like talc powder, it is dry. TIMBERMATE will not blind the sandpaper (ie. clog up). If sandpaper gets clogged the grainfiller is not dry. Sand off in the same direction as the grain. Stain or coat when dry.
Question: When is the stain applied?
Answer: You can stain before or after applying TIMBERMATE (see "How do I match colours").
Question: How are the colours matched?
Answer: Colour matching is easy. You can do it either of the following ways: Add your colourant to the putty and match the exact colour whilst wet. TIMBERMATE will dry lighter, but coat back to its original wet colour once coated with clear finishes. The final result is what you see (wet) is what you get. You can stain TIMBERMATE once it is dry. To test if dry, just rub sandpaper over putty. If putty clogs the sandpaper the filler is still wet. Wait for TIMBERMATE to dry and then stain.
Question: How long does TIMBERMATE take to dry?
Answer: Depending on the weather and depth of fill, TIMBERMATE will dry as follows: In hot weather, TIMBERMATE dries quicker. In cold weather, the depth of fill will determine the drying time. You can speed up the drying time by using a heat gun, hair dryer or light.
Question: What depth or width can be filled?
Answer: Do not fill holes deeper than 6-8mm at a time. TIMBERMATE dries quicker when filled in layers. Allow TIMBERMATE to dry between layers.
Question: Why is the tub hard some days and feels dry and soft on other days?
Answer: TIMBERMATE is waterbased. It contains no harmful solvents or acrylics and is, therefore, temperature sensitive. The warmer the weather or environment the softer the putty. On hot days it will start to dry in the tub if not properly sealed. Add a few drops of water to re moisten.
Question: How is TIMBERMATE softened?
Answer: Add a few drops of warm water to the top of the tub. It will soften quite quickly. If tub is frozen, thaw out by standing tub in a tub of hot water or place in a microwave for 20 seconds. TIMBERMATE is freeze thaw stable.
Question: Can TIMBERMATE be used for any other purpose other than wood repair?
Answer: TIMBERMATE does not shrink, sink, crack or fallout and can, therefore, be used on Plasterboard, Masonry, Fibreglass, Plastic and any other surface. Bearing in mind that steel must be coated with a primer to avoid rusting.
Question: Can TIMBERMATE go off or does it have a shelf life?
Answer: TIMBERMATE has an unlimited shelf life and will last indefinitely. If contents become dry merely add a few drops of water to reconstitute. DO NOT add more water than is necessary or leave excess water in the tub for a long period of time. The trapped excess water in the tub will cause the putty to become contaminated and will start to degenerate.
Question: Why are so many colours available?
Answer: We manufacture 13 colours to match almost all shades and types of timber. If you are using a clear coat you must match your putty colour. If staining, use Natural (tinting base).
Question: What is Tint Base (Natural) putty and why?
Answer: Tint Base (Natural putty) is putty in its natural state uncoloured. You may add the lightest shade of tint to change its colour.
Question: Can TIMBERMATE be used on floors?
Answer: TIMBERMATE is ideal for filling cracks, gaps, and nail holes in floors. TIMBERMATE will enhance the grain on the floor. As it does not shrink, sink, crack or fall out it is highly recommended for all floors.
Question: Can TIMBERMATE be used with French Polish and Waxes?
Answer: You can use all types of Waxes, Shellac and Oils on TIMBERMATE.
Question: How is an incorrect match or badly filled hole fixed?
Answer: Errors can be fixed with ease. If TIMBERMATE is not coated then wash out. If already coated, then break the top coat and then wash out. Refill or rematch if necessary.
Question: Is TIMBERMATE Australian owned and manufactured?
Answer: Yes. TIMBERMATE is 100% Australian owned and manufactured. An all Australian dedicated workforce does all manufacturing in our Melbourne factory.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Tommy Tape® Self-Fusing Silicone Tape
The next generation of tape is here — premium, adhesive-free repair and sealing tape for fast fixes at home, on the job, and on the road.
Tommy Tape self-fusing silicone tape saves time and money across plumbing, electrical, automotive, marine, garden, and industrial jobs.
Unlike vinyl or cloth tapes, it uses no adhesive. Instead, it chemically bonds (self-fuses) to itself on contact to form a tough, flexible, and permanently water-tight wrap — even underwater.
Why you’ll love it
Extreme temperature range: operates from −65 °F to +500 °F (approx. −54 °C to +260 °C).
Electrical safety: insulates up to 8,000 V per layer (typical PVC electrical tape ≈ 600 V).
Leaves no residue: no adhesive means no sticky mess when removed.
Weather- & waterproof: seals within seconds; ideal for outdoor and marine use.
Flexible & form-fitting: stretches over 300% to wrap irregular shapes, fittings, and bends.
Built to last: resists UV, oil, salt, and common chemicals; helps combat corrosion.
Popular uses
Plumbing: emergency seals on copper, PVC, and garden hoses; patch vacuum and pool hoses.
Electrical: bundling and insulating leads, wire harnesses, extension-cord strain relief (power off first).
Automotive & 4×4: wrap frayed looms, protect hoses, create quick roadside fixes.
Marine: mast boot wraps, deck-side waterproofing, salt-spray protection.
Tools & grips: re-grip shovels, rakes, wheelbarrows, gym dumbbells, walking canes.
Sports & DIY: re-grip golf clubs, tennis/pickleball paddles; improve wheelchair and shower-chair grip.
Home & garden: weatherproof outdoor cables, protect back-yard gear and appliances.
Industrial: protective wraps on fittings, temporary containment where adhesives aren’t suitable.
How to apply (best results)
Prep: Turn power/water off where applicable. Clean and dry the area if possible.
Start & anchor: Peel off the liner, stretch the tape as you begin to wrap, and press the starting end onto itself to anchor.
Stretch & overlap: Stretch to at least 2× its length (more stretch = stronger fuse). Overlap each wrap by ½ width.
Build layers: Add additional layers for higher pressure, stronger seals, or increased dielectric protection.
Finish: End the wrap on itself and press firmly. Full fusion develops quickly; handle with care while it sets.
Remove: Cut off (do not unwind) when it’s time to replace — it leaves no residue.
Specifications
Material
Silicone rubber (self-fusing)
Adhesive
None (bonds to itself on contact)
Dielectric Strength
Up to 8,000 V per layer (build layers for higher insulation)
Temperature Range
−65 °F to +500 °F (approx. −54 °C to +260 °C)
Resistance
UV, oil, salt, weather, and common household/automotive chemicals
Water Performance
Weatherproof & waterproof; can be applied underwater in many scenarios
Elongation
Stretches over 300% for tight, conformal wraps
Removal
Cut off to remove; no sticky residue
Colours / Sizes
Varies by SKU (see options above)
Better than traditional tapes
Feature
Tommy Tape Self-Fusing Silicone
Vinyl / Cloth Electrical Tape
Adhesive
No adhesive (self-fuses)
Pressure-sensitive adhesive (leaves residue)
Waterproof Seal
Yes — seals in seconds; can be used underwater
Limited; adhesive can lift when wet
Dielectric Strength
Up to 8,000 V per layer
Typically ~600 V
Temperature Range
−54 °C to +260 °C
Narrower range; softens or becomes brittle
UV/Chemical Resistance
Excellent (UV, oil, salt, chemicals)
Moderate; can degrade outdoors
Residue on Removal
None — clean cut-off
Commonly leaves sticky residue
FAQs
Can I use it on live electrical circuits?
No. Always switch power off before wrapping. Build sufficient layers for the required insulation, and follow local electrical standards.
Will it stick to wet or oily surfaces?
Because it bonds to itself (not the substrate), it can often be applied in damp or even underwater situations. For best results, clean and dry the area first.
Is it reusable?
Once fused, it forms a single mass. Cut it off to remove; it won’t unwind. Apply a fresh wrap if needed.
What isn’t it for?
Not a substitute for permanent structural repairs. Avoid use on fuel lines or high-pressure systems without proper engineering sign-off.
Notes: Performance values are typical and depend on application method, substrate, and number of layers. Always test on a small area first. Follow safety guidelines for electrical and pressurised systems.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Tommy Tape® Self-Fusing Silicone Tape
The next generation of tape is here — premium, adhesive-free repair and sealing tape for fast fixes at home, on the job, and on the road.
Tommy Tape self-fusing silicone tape saves time and money across plumbing, electrical, automotive, marine, garden, and industrial jobs.
Unlike vinyl or cloth tapes, it uses no adhesive. Instead, it chemically bonds (self-fuses) to itself on contact to form a tough, flexible, and permanently water-tight wrap — even underwater.
Why you’ll love it
Extreme temperature range: operates from −65 °F to +500 °F (approx. −54 °C to +260 °C).
Electrical safety: insulates up to 8,000 V per layer (typical PVC electrical tape ≈ 600 V).
Leaves no residue: no adhesive means no sticky mess when removed.
Weather- & waterproof: seals within seconds; ideal for outdoor and marine use.
Flexible & form-fitting: stretches over 300% to wrap irregular shapes, fittings, and bends.
Built to last: resists UV, oil, salt, and common chemicals; helps combat corrosion.
Popular uses
Plumbing: emergency seals on copper, PVC, and garden hoses; patch vacuum and pool hoses.
Electrical: bundling and insulating leads, wire harnesses, extension-cord strain relief (power off first).
Automotive & 4×4: wrap frayed looms, protect hoses, create quick roadside fixes.
Marine: mast boot wraps, deck-side waterproofing, salt-spray protection.
Tools & grips: re-grip shovels, rakes, wheelbarrows, gym dumbbells, walking canes.
Sports & DIY: re-grip golf clubs, tennis/pickleball paddles; improve wheelchair and shower-chair grip.
Home & garden: weatherproof outdoor cables, protect back-yard gear and appliances.
Industrial: protective wraps on fittings, temporary containment where adhesives aren’t suitable.
How to apply (best results)
Prep: Turn power/water off where applicable. Clean and dry the area if possible.
Start & anchor: Peel off the liner, stretch the tape as you begin to wrap, and press the starting end onto itself to anchor.
Stretch & overlap: Stretch to at least 2× its length (more stretch = stronger fuse). Overlap each wrap by ½ width.
Build layers: Add additional layers for higher pressure, stronger seals, or increased dielectric protection.
Finish: End the wrap on itself and press firmly. Full fusion develops quickly; handle with care while it sets.
Remove: Cut off (do not unwind) when it’s time to replace — it leaves no residue.
Specifications
Material
Silicone rubber (self-fusing)
Adhesive
None (bonds to itself on contact)
Dielectric Strength
Up to 8,000 V per layer (build layers for higher insulation)
Temperature Range
−65 °F to +500 °F (approx. −54 °C to +260 °C)
Resistance
UV, oil, salt, weather, and common household/automotive chemicals
Water Performance
Weatherproof & waterproof; can be applied underwater in many scenarios
Elongation
Stretches over 300% for tight, conformal wraps
Removal
Cut off to remove; no sticky residue
Colours / Sizes
Varies by SKU (see options above)
Better than traditional tapes
Feature
Tommy Tape Self-Fusing Silicone
Vinyl / Cloth Electrical Tape
Adhesive
No adhesive (self-fuses)
Pressure-sensitive adhesive (leaves residue)
Waterproof Seal
Yes — seals in seconds; can be used underwater
Limited; adhesive can lift when wet
Dielectric Strength
Up to 8,000 V per layer
Typically ~600 V
Temperature Range
−54 °C to +260 °C
Narrower range; softens or becomes brittle
UV/Chemical Resistance
Excellent (UV, oil, salt, chemicals)
Moderate; can degrade outdoors
Residue on Removal
None — clean cut-off
Commonly leaves sticky residue
FAQs
Can I use it on live electrical circuits?
No. Always switch power off before wrapping. Build sufficient layers for the required insulation, and follow local electrical standards.
Will it stick to wet or oily surfaces?
Because it bonds to itself (not the substrate), it can often be applied in damp or even underwater situations. For best results, clean and dry the area first.
Is it reusable?
Once fused, it forms a single mass. Cut it off to remove; it won’t unwind. Apply a fresh wrap if needed.
What isn’t it for?
Not a substitute for permanent structural repairs. Avoid use on fuel lines or high-pressure systems without proper engineering sign-off.
Notes: Performance values are typical and depend on application method, substrate, and number of layers. Always test on a small area first. Follow safety guidelines for electrical and pressurised systems.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Tommy Tape® Self-Fusing Silicone Tape
The next generation of tape is here — premium, adhesive-free repair and sealing tape for fast fixes at home, on the job, and on the road.
Tommy Tape self-fusing silicone tape saves time and money across plumbing, electrical, automotive, marine, garden, and industrial jobs.
Unlike vinyl or cloth tapes, it uses no adhesive. Instead, it chemically bonds (self-fuses) to itself on contact to form a tough, flexible, and permanently water-tight wrap — even underwater.
Why you’ll love it
Extreme temperature range: operates from −65 °F to +500 °F (approx. −54 °C to +260 °C).
Electrical safety: insulates up to 8,000 V per layer (typical PVC electrical tape ≈ 600 V).
Leaves no residue: no adhesive means no sticky mess when removed.
Weather- & waterproof: seals within seconds; ideal for outdoor and marine use.
Flexible & form-fitting: stretches over 300% to wrap irregular shapes, fittings, and bends.
Built to last: resists UV, oil, salt, and common chemicals; helps combat corrosion.
Popular uses
Plumbing: emergency seals on copper, PVC, and garden hoses; patch vacuum and pool hoses.
Electrical: bundling and insulating leads, wire harnesses, extension-cord strain relief (power off first).
Automotive & 4×4: wrap frayed looms, protect hoses, create quick roadside fixes.
Marine: mast boot wraps, deck-side waterproofing, salt-spray protection.
Tools & grips: re-grip shovels, rakes, wheelbarrows, gym dumbbells, walking canes.
Sports & DIY: re-grip golf clubs, tennis/pickleball paddles; improve wheelchair and shower-chair grip.
Home & garden: weatherproof outdoor cables, protect back-yard gear and appliances.
Industrial: protective wraps on fittings, temporary containment where adhesives aren’t suitable.
How to apply (best results)
Prep: Turn power/water off where applicable. Clean and dry the area if possible.
Start & anchor: Peel off the liner, stretch the tape as you begin to wrap, and press the starting end onto itself to anchor.
Stretch & overlap: Stretch to at least 2× its length (more stretch = stronger fuse). Overlap each wrap by ½ width.
Build layers: Add additional layers for higher pressure, stronger seals, or increased dielectric protection.
Finish: End the wrap on itself and press firmly. Full fusion develops quickly; handle with care while it sets.
Remove: Cut off (do not unwind) when it’s time to replace — it leaves no residue.
Specifications
Material
Silicone rubber (self-fusing)
Adhesive
None (bonds to itself on contact)
Dielectric Strength
Up to 8,000 V per layer (build layers for higher insulation)
Temperature Range
−65 °F to +500 °F (approx. −54 °C to +260 °C)
Resistance
UV, oil, salt, weather, and common household/automotive chemicals
Water Performance
Weatherproof & waterproof; can be applied underwater in many scenarios
Elongation
Stretches over 300% for tight, conformal wraps
Removal
Cut off to remove; no sticky residue
Colours / Sizes
Varies by SKU (see options above)
Better than traditional tapes
Feature
Tommy Tape Self-Fusing Silicone
Vinyl / Cloth Electrical Tape
Adhesive
No adhesive (self-fuses)
Pressure-sensitive adhesive (leaves residue)
Waterproof Seal
Yes — seals in seconds; can be used underwater
Limited; adhesive can lift when wet
Dielectric Strength
Up to 8,000 V per layer
Typically ~600 V
Temperature Range
−54 °C to +260 °C
Narrower range; softens or becomes brittle
UV/Chemical Resistance
Excellent (UV, oil, salt, chemicals)
Moderate; can degrade outdoors
Residue on Removal
None — clean cut-off
Commonly leaves sticky residue
FAQs
Can I use it on live electrical circuits?
No. Always switch power off before wrapping. Build sufficient layers for the required insulation, and follow local electrical standards.
Will it stick to wet or oily surfaces?
Because it bonds to itself (not the substrate), it can often be applied in damp or even underwater situations. For best results, clean and dry the area first.
Is it reusable?
Once fused, it forms a single mass. Cut it off to remove; it won’t unwind. Apply a fresh wrap if needed.
What isn’t it for?
Not a substitute for permanent structural repairs. Avoid use on fuel lines or high-pressure systems without proper engineering sign-off.
Notes: Performance values are typical and depend on application method, substrate, and number of layers. Always test on a small area first. Follow safety guidelines for electrical and pressurised systems.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Tommy Tape® Self-Fusing Silicone Tape
The next generation of tape is here — premium, adhesive-free repair and sealing tape for fast fixes at home, on the job, and on the road.
Tommy Tape self-fusing silicone tape saves time and money across plumbing, electrical, automotive, marine, garden, and industrial jobs.
Unlike vinyl or cloth tapes, it uses no adhesive. Instead, it chemically bonds (self-fuses) to itself on contact to form a tough, flexible, and permanently water-tight wrap — even underwater.
Why you’ll love it
Extreme temperature range: operates from −65 °F to +500 °F (approx. −54 °C to +260 °C).
Electrical safety: insulates up to 8,000 V per layer (typical PVC electrical tape ≈ 600 V).
Leaves no residue: no adhesive means no sticky mess when removed.
Weather- & waterproof: seals within seconds; ideal for outdoor and marine use.
Flexible & form-fitting: stretches over 300% to wrap irregular shapes, fittings, and bends.
Built to last: resists UV, oil, salt, and common chemicals; helps combat corrosion.
Popular uses
Plumbing: emergency seals on copper, PVC, and garden hoses; patch vacuum and pool hoses.
Electrical: bundling and insulating leads, wire harnesses, extension-cord strain relief (power off first).
Automotive & 4×4: wrap frayed looms, protect hoses, create quick roadside fixes.
Marine: mast boot wraps, deck-side waterproofing, salt-spray protection.
Tools & grips: re-grip shovels, rakes, wheelbarrows, gym dumbbells, walking canes.
Sports & DIY: re-grip golf clubs, tennis/pickleball paddles; improve wheelchair and shower-chair grip.
Home & garden: weatherproof outdoor cables, protect back-yard gear and appliances.
Industrial: protective wraps on fittings, temporary containment where adhesives aren’t suitable.
How to apply (best results)
Prep: Turn power/water off where applicable. Clean and dry the area if possible.
Start & anchor: Peel off the liner, stretch the tape as you begin to wrap, and press the starting end onto itself to anchor.
Stretch & overlap: Stretch to at least 2× its length (more stretch = stronger fuse). Overlap each wrap by ½ width.
Build layers: Add additional layers for higher pressure, stronger seals, or increased dielectric protection.
Finish: End the wrap on itself and press firmly. Full fusion develops quickly; handle with care while it sets.
Remove: Cut off (do not unwind) when it’s time to replace — it leaves no residue.
Specifications
Material
Silicone rubber (self-fusing)
Adhesive
None (bonds to itself on contact)
Dielectric Strength
Up to 8,000 V per layer (build layers for higher insulation)
Temperature Range
−65 °F to +500 °F (approx. −54 °C to +260 °C)
Resistance
UV, oil, salt, weather, and common household/automotive chemicals
Water Performance
Weatherproof & waterproof; can be applied underwater in many scenarios
Elongation
Stretches over 300% for tight, conformal wraps
Removal
Cut off to remove; no sticky residue
Colours / Sizes
Varies by SKU (see options above)
Better than traditional tapes
Feature
Tommy Tape Self-Fusing Silicone
Vinyl / Cloth Electrical Tape
Adhesive
No adhesive (self-fuses)
Pressure-sensitive adhesive (leaves residue)
Waterproof Seal
Yes — seals in seconds; can be used underwater
Limited; adhesive can lift when wet
Dielectric Strength
Up to 8,000 V per layer
Typically ~600 V
Temperature Range
−54 °C to +260 °C
Narrower range; softens or becomes brittle
UV/Chemical Resistance
Excellent (UV, oil, salt, chemicals)
Moderate; can degrade outdoors
Residue on Removal
None — clean cut-off
Commonly leaves sticky residue
FAQs
Can I use it on live electrical circuits?
No. Always switch power off before wrapping. Build sufficient layers for the required insulation, and follow local electrical standards.
Will it stick to wet or oily surfaces?
Because it bonds to itself (not the substrate), it can often be applied in damp or even underwater situations. For best results, clean and dry the area first.
Is it reusable?
Once fused, it forms a single mass. Cut it off to remove; it won’t unwind. Apply a fresh wrap if needed.
What isn’t it for?
Not a substitute for permanent structural repairs. Avoid use on fuel lines or high-pressure systems without proper engineering sign-off.
Notes: Performance values are typical and depend on application method, substrate, and number of layers. Always test on a small area first. Follow safety guidelines for electrical and pressurised systems.
Sold Out
Express Post: 1-3 Days | Standard Post: 2-5 Days
Tommy Tape® Self-Fusing Silicone Tape
The next generation of tape is here — premium, adhesive-free repair and sealing tape for fast fixes at home, on the job, and on the road.
Tommy Tape self-fusing silicone tape saves time and money across plumbing, electrical, automotive, marine, garden, and industrial jobs.
Unlike vinyl or cloth tapes, it uses no adhesive. Instead, it chemically bonds (self-fuses) to itself on contact to form a tough, flexible, and permanently water-tight wrap — even underwater.
Why you’ll love it
Extreme temperature range: operates from −65 °F to +500 °F (approx. −54 °C to +260 °C).
Electrical safety: insulates up to 8,000 V per layer (typical PVC electrical tape ≈ 600 V).
Leaves no residue: no adhesive means no sticky mess when removed.
Weather- & waterproof: seals within seconds; ideal for outdoor and marine use.
Flexible & form-fitting: stretches over 300% to wrap irregular shapes, fittings, and bends.
Built to last: resists UV, oil, salt, and common chemicals; helps combat corrosion.
Popular uses
Plumbing: emergency seals on copper, PVC, and garden hoses; patch vacuum and pool hoses.
Electrical: bundling and insulating leads, wire harnesses, extension-cord strain relief (power off first).
Automotive & 4×4: wrap frayed looms, protect hoses, create quick roadside fixes.
Marine: mast boot wraps, deck-side waterproofing, salt-spray protection.
Tools & grips: re-grip shovels, rakes, wheelbarrows, gym dumbbells, walking canes.
Sports & DIY: re-grip golf clubs, tennis/pickleball paddles; improve wheelchair and shower-chair grip.
Home & garden: weatherproof outdoor cables, protect back-yard gear and appliances.
Industrial: protective wraps on fittings, temporary containment where adhesives aren’t suitable.
How to apply (best results)
Prep: Turn power/water off where applicable. Clean and dry the area if possible.
Start & anchor: Peel off the liner, stretch the tape as you begin to wrap, and press the starting end onto itself to anchor.
Stretch & overlap: Stretch to at least 2× its length (more stretch = stronger fuse). Overlap each wrap by ½ width.
Build layers: Add additional layers for higher pressure, stronger seals, or increased dielectric protection.
Finish: End the wrap on itself and press firmly. Full fusion develops quickly; handle with care while it sets.
Remove: Cut off (do not unwind) when it’s time to replace — it leaves no residue.
Specifications
Material
Silicone rubber (self-fusing)
Adhesive
None (bonds to itself on contact)
Dielectric Strength
Up to 8,000 V per layer (build layers for higher insulation)
Temperature Range
−65 °F to +500 °F (approx. −54 °C to +260 °C)
Resistance
UV, oil, salt, weather, and common household/automotive chemicals
Water Performance
Weatherproof & waterproof; can be applied underwater in many scenarios
Elongation
Stretches over 300% for tight, conformal wraps
Removal
Cut off to remove; no sticky residue
Colours / Sizes
Varies by SKU (see options above)
Better than traditional tapes
Feature
Tommy Tape Self-Fusing Silicone
Vinyl / Cloth Electrical Tape
Adhesive
No adhesive (self-fuses)
Pressure-sensitive adhesive (leaves residue)
Waterproof Seal
Yes — seals in seconds; can be used underwater
Limited; adhesive can lift when wet
Dielectric Strength
Up to 8,000 V per layer
Typically ~600 V
Temperature Range
−54 °C to +260 °C
Narrower range; softens or becomes brittle
UV/Chemical Resistance
Excellent (UV, oil, salt, chemicals)
Moderate; can degrade outdoors
Residue on Removal
None — clean cut-off
Commonly leaves sticky residue
FAQs
Can I use it on live electrical circuits?
No. Always switch power off before wrapping. Build sufficient layers for the required insulation, and follow local electrical standards.
Will it stick to wet or oily surfaces?
Because it bonds to itself (not the substrate), it can often be applied in damp or even underwater situations. For best results, clean and dry the area first.
Is it reusable?
Once fused, it forms a single mass. Cut it off to remove; it won’t unwind. Apply a fresh wrap if needed.
What isn’t it for?
Not a substitute for permanent structural repairs. Avoid use on fuel lines or high-pressure systems without proper engineering sign-off.
Notes: Performance values are typical and depend on application method, substrate, and number of layers. Always test on a small area first. Follow safety guidelines for electrical and pressurised systems.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Tommy Tape® Self-Fusing Silicone Tape
The next generation of tape is here — premium, adhesive-free repair and sealing tape for fast fixes at home, on the job, and on the road.
Tommy Tape self-fusing silicone tape saves time and money across plumbing, electrical, automotive, marine, garden, and industrial jobs.
Unlike vinyl or cloth tapes, it uses no adhesive. Instead, it chemically bonds (self-fuses) to itself on contact to form a tough, flexible, and permanently water-tight wrap — even underwater.
Why you’ll love it
Extreme temperature range: operates from −65 °F to +500 °F (approx. −54 °C to +260 °C).
Electrical safety: insulates up to 8,000 V per layer (typical PVC electrical tape ≈ 600 V).
Leaves no residue: no adhesive means no sticky mess when removed.
Weather- & waterproof: seals within seconds; ideal for outdoor and marine use.
Flexible & form-fitting: stretches over 300% to wrap irregular shapes, fittings, and bends.
Built to last: resists UV, oil, salt, and common chemicals; helps combat corrosion.
Popular uses
Plumbing: emergency seals on copper, PVC, and garden hoses; patch vacuum and pool hoses.
Electrical: bundling and insulating leads, wire harnesses, extension-cord strain relief (power off first).
Automotive & 4×4: wrap frayed looms, protect hoses, create quick roadside fixes.
Marine: mast boot wraps, deck-side waterproofing, salt-spray protection.
Tools & grips: re-grip shovels, rakes, wheelbarrows, gym dumbbells, walking canes.
Sports & DIY: re-grip golf clubs, tennis/pickleball paddles; improve wheelchair and shower-chair grip.
Home & garden: weatherproof outdoor cables, protect back-yard gear and appliances.
Industrial: protective wraps on fittings, temporary containment where adhesives aren’t suitable.
How to apply (best results)
Prep: Turn power/water off where applicable. Clean and dry the area if possible.
Start & anchor: Peel off the liner, stretch the tape as you begin to wrap, and press the starting end onto itself to anchor.
Stretch & overlap: Stretch to at least 2× its length (more stretch = stronger fuse). Overlap each wrap by ½ width.
Build layers: Add additional layers for higher pressure, stronger seals, or increased dielectric protection.
Finish: End the wrap on itself and press firmly. Full fusion develops quickly; handle with care while it sets.
Remove: Cut off (do not unwind) when it’s time to replace — it leaves no residue.
Specifications
Material
Silicone rubber (self-fusing)
Adhesive
None (bonds to itself on contact)
Dielectric Strength
Up to 8,000 V per layer (build layers for higher insulation)
Temperature Range
−65 °F to +500 °F (approx. −54 °C to +260 °C)
Resistance
UV, oil, salt, weather, and common household/automotive chemicals
Water Performance
Weatherproof & waterproof; can be applied underwater in many scenarios
Elongation
Stretches over 300% for tight, conformal wraps
Removal
Cut off to remove; no sticky residue
Colours / Sizes
Varies by SKU (see options above)
Better than traditional tapes
Feature
Tommy Tape Self-Fusing Silicone
Vinyl / Cloth Electrical Tape
Adhesive
No adhesive (self-fuses)
Pressure-sensitive adhesive (leaves residue)
Waterproof Seal
Yes — seals in seconds; can be used underwater
Limited; adhesive can lift when wet
Dielectric Strength
Up to 8,000 V per layer
Typically ~600 V
Temperature Range
−54 °C to +260 °C
Narrower range; softens or becomes brittle
UV/Chemical Resistance
Excellent (UV, oil, salt, chemicals)
Moderate; can degrade outdoors
Residue on Removal
None — clean cut-off
Commonly leaves sticky residue
FAQs
Can I use it on live electrical circuits?
No. Always switch power off before wrapping. Build sufficient layers for the required insulation, and follow local electrical standards.
Will it stick to wet or oily surfaces?
Because it bonds to itself (not the substrate), it can often be applied in damp or even underwater situations. For best results, clean and dry the area first.
Is it reusable?
Once fused, it forms a single mass. Cut it off to remove; it won’t unwind. Apply a fresh wrap if needed.
What isn’t it for?
Not a substitute for permanent structural repairs. Avoid use on fuel lines or high-pressure systems without proper engineering sign-off.
Notes: Performance values are typical and depend on application method, substrate, and number of layers. Always test on a small area first. Follow safety guidelines for electrical and pressurised systems.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Tommy Tape® Self-Fusing Silicone Tape
The next generation of tape is here — premium, adhesive-free repair and sealing tape for fast fixes at home, on the job, and on the road.
Tommy Tape self-fusing silicone tape saves time and money across plumbing, electrical, automotive, marine, garden, and industrial jobs. Unlike vinyl or cloth tapes, it uses no adhesive. Instead, it chemically bonds (self-fuses) to itself on contact to form a tough, flexible, and permanently water-tight wrap — even underwater.
Why you’ll love it
Extreme temperature range: operates from −65 °F to +500 °F (approx. −54 °C to +260 °C).
Electrical safety: insulates up to 8,000 V per layer (typical PVC electrical tape ≈ 600 V).
Leaves no residue: no adhesive means no sticky mess when removed.
Weather- & waterproof: seals within seconds; ideal for outdoor and marine use.
Flexible & form-fitting: stretches over 300% to wrap irregular shapes, fittings, and bends.
Built to last: resists UV, oil, salt, and common chemicals; helps combat corrosion.
Popular uses
Plumbing: emergency seals on copper, PVC, and garden hoses; patch vacuum and pool hoses.
Electrical: bundling and insulating leads, wire harnesses, extension-cord strain relief (power off first).
Automotive & 4×4: wrap frayed looms, protect hoses, create quick roadside fixes.
Marine: mast boot wraps, deck-side waterproofing, salt-spray protection.
Tools & grips: re-grip shovels, rakes, wheelbarrows, gym dumbbells, walking canes.
Sports & DIY: re-grip golf clubs, tennis/pickleball paddles; improve wheelchair and shower-chair grip.
Home & garden: weatherproof outdoor cables, protect back-yard gear and appliances.
Industrial: protective wraps on fittings, temporary containment where adhesives aren’t suitable.
How to apply (best results)
Prep: Turn power/water off where applicable. Clean and dry the area if possible.
Start & anchor: Peel off the liner, stretch the tape as you begin to wrap, and press the starting end onto itself to anchor.
Stretch & overlap: Stretch to at least 2× its length (more stretch = stronger fuse). Overlap each wrap by ½ width.
Build layers: Add additional layers for higher pressure, stronger seals, or increased dielectric protection.
Finish: End the wrap on itself and press firmly. Full fusion develops quickly; handle with care while it sets.
Remove: Cut off (do not unwind) when it’s time to replace — it leaves no residue.
Specifications
Material
Silicone rubber (self-fusing)
Adhesive
None (bonds to itself on contact)
Dielectric Strength
Up to 8,000 V per layer (build layers for higher insulation)
Temperature Range
−65 °F to +500 °F (approx. −54 °C to +260 °C)
Resistance
UV, oil, salt, weather, and common household/automotive chemicals
Water Performance
Weatherproof & waterproof; can be applied underwater in many scenarios
Elongation
Stretches over 300% for tight, conformal wraps
Removal
Cut off to remove; no sticky residue
Colours / Sizes
Varies by SKU (see options above)
Better than traditional tapes
Feature
Tommy Tape Self-Fusing Silicone
Vinyl / Cloth Electrical Tape
Adhesive
No adhesive (self-fuses)
Pressure-sensitive adhesive (leaves residue)
Waterproof Seal
Yes — seals in seconds; can be used underwater
Limited; adhesive can lift when wet
Dielectric Strength
Up to 8,000 V per layer
Typically ~600 V
Temperature Range
−54 °C to +260 °C
Narrower range; softens or becomes brittle
UV/Chemical Resistance
Excellent (UV, oil, salt, chemicals)
Moderate; can degrade outdoors
Residue on Removal
None — clean cut-off
Commonly leaves sticky residue
FAQs
Can I use it on live electrical circuits?
No. Always switch power off before wrapping. Build sufficient layers for the required insulation, and follow local electrical standards.
Will it stick to wet or oily surfaces?
Because it bonds to itself (not the substrate), it can often be applied in damp or even underwater situations. For best results, clean and dry the area first.
Is it reusable?
Once fused, it forms a single mass. Cut it off to remove; it won’t unwind. Apply a fresh wrap if needed.
What isn’t it for?
Not a substitute for permanent structural repairs. Avoid use on fuel lines or high-pressure systems without proper engineering sign-off.
Notes: Performance values are typical and depend on application method, substrate, and number of layers. Always test on a small area first. Follow safety guidelines for electrical and pressurised systems.
Sold Out
Express Post: 1-3 Days | Standard Post: 2-5 Days
USE TRICLEANIUM:
•Before painting or wallpapering
•On internal or external walls, floors, benchtops, tiles, slate, stainless steel, baths, glass, stovetops, range hoods, fridges, cupboards, shelves, greasy oven trays, home brewing equipment.
•To clean musty washing machines
•Outside on greasy driveways or garage floors, boats or BBQs.
•In the factory, commercial kitchen, where concentrated cleaning power or degreasing is needed.
TRICLEANIUM is a wholly Australian owned family business and has been in the market place for more than 50 years.
TRICLEANIUM is a concentrated cleaning product in crystal form (100% alkaline salts). It is not diluted by fillers or water.
TRICLEANIUM’s ultra-concentrated power means it can tackle the toughest jobs that other products won’t touch including BBQs, range hoods, greasy driveways, cleaning in engineering works and the like.
TRICLEANIUM can be used on almost any washable surface (floors, walls, concrete, kitchen appliances, fibreglass, tiles etc) but prolonged contact with exposed aluminium and brass should be avoided.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
USE TRICLEANIUM:
•Before painting or wallpapering
•On internal or external walls, floors, bench tops, tiles, slate, stainless steel, baths, glass, stove tops, range hoods, fridges, cupboards, shelves, greasy oven trays, home brewing equipment.
•To clean musty washing machines
•Outside on greasy driveways or garage floors, boats or BBQ's.
•In the factory, commercial kitchen, where concentrated cleaning power or degreasing is needed.
TRICLEANIUM is a wholly Australian owned family business and has been in the market place for more than 50 years.
TRICLEANIUM is a concentrated cleaning product in crystal form (100% alkaline salts). It is not diluted by fillers or water.
TRICLEANIUM’s ultra concentrated power means it can tackle the toughest jobs that other products won’t touch including BBQs, range hoods, greasy driveways, cleaning in engineering works and the like.
TRICLEANIUM can be used on almost any washable surface (floors, walls, concrete, kitchen appliances, fibreglass, tiles etc) but prolonged contact with exposed aluminium and brass should be avoided.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
USE TRICLEANIUM:
•Before painting or wallpapering
•On internal or external walls, floors, bench tops, tiles, slate, stainless steel, baths, glass, stove tops, range hoods, fridges, cupboards, shelves, greasy oven trays, home brewing equipment.
•To clean musty washing machines
•Outside on greasy driveways or garage floors, boats or BBQ's.
•In the factory, commercial kitchen, where concentrated cleaning power or degreasing is needed.
TRICLEANIUM is a wholly Australian owned family business and has been in the market place for more than 50 years.
TRICLEANIUM is a concentrated cleaning product in crystal form (100% alkaline salts). It is not diluted by fillers or water.
TRICLEANIUM’s ultra concentrated power means it can tackle the toughest jobs that other products won’t touch including BBQs, range hoods, greasy driveways, cleaning in engineering works and the like.
TRICLEANIUM can be used on almost any washable surface (floors, walls, concrete, kitchen appliances, fibreglass, tiles etc) but prolonged contact with exposed aluminium and brass should be avoided.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
USE TRICLEANIUM:
•Before painting or wallpapering
•On internal or external walls, floors, bench tops, tiles, slate, stainless steel, baths, glass, stove tops, range hoods, fridges, cupboards, shelves, greasy oven trays, home brewing equipment.
•To clean musty washing machines
•Outside on greasy driveways or garage floors, boats or BBQ's.
•In the factory, commercial kitchen, where concentrated cleaning power or degreasing is needed.
TRICLEANIUM is a wholly Australian owned family business and has been in the market place for more than 50 years.
TRICLEANIUM is a concentrated cleaning product in crystal form (100% alkaline salts). It is not diluted by fillers or water.
TRICLEANIUM’s ultra concentrated power means it can tackle the toughest jobs that other products won’t touch including BBQs, range hoods, greasy driveways, cleaning in engineering works and the like.
TRICLEANIUM can be used on almost any washable surface (floors, walls, concrete, kitchen appliances, fibreglass, tiles etc) but prolonged contact with exposed aluminium and brass should be avoided.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Tuff Turf Synthetic Grass Adhesive 320 g
Overview
Tuff Turf Synthetic Grass Adhesive 320 g is a high quality synthetic grass adhesive designed to deliver consistent, reliable bonding performance for trade professionals and serious DIYers. It is formulated for dependable adhesion, easy application, and clean finishing so you can complete jobs with confidence and minimal rework.
Why choose this product
Reliable bond performance supported by proven chemistry and rigorous quality control.
Smooth, predictable application that helps reduce mess and cleanup time.
Versatile adhesion profile suited to a wide range of substrates and project types.
Clear guidance on surface preparation, application method, and curing to help achieve the best possible result.
Suitable for residential fit-outs, maintenance, repairs, and light commercial projects.
Suitable materials
synthetic turf backing
seaming tape
concrete
compacted base
plywood
Typical applications
General installation, repair, and maintenance where a durable bond is required.
Interior work that benefits from a neat finish and tidy joints.
Projects where dependable initial grab and high final strength are important.
Surface preparation
Ensure all surfaces are clean, sound, and dry. Remove dust, oil, release agents, laitance, and any loose or flaky material. For dense or non-porous surfaces, light abrasion improves key. Test adhesion on a small area if you are unsure about compatibility. Observe local safety requirements when sanding or cutting.
Application
Check ambient and substrate temperature. Install in dry conditions between 10°C and 30°C, avoiding heavy dew or rain.
Cut the nozzle to the required bead size or prepare the container according to the product type.
Apply an even bead or spread with a suitable trowel where required. Avoid trapping air.
Press the materials together, ensuring full contact. For sheet goods, roll firmly to promote transfer and wetting.
Support, clamp, or brace as needed until the adhesive develops sufficient handling strength.
Cure and working time
Working time varies with conditions. Allow sufficient cure before foot traffic. Full strength typically within 24 to 48 hours. Cooler temperatures and high humidity will slow curing, while warmer, drier conditions accelerate it. Do not load or finish until the bond has developed adequate strength. Always follow best practice for ventilation and safe handling during cure.
Coverage
Coverage varies based on substrate profile, bead size, and installation method. As a guide, a 300 ml cartridge with a 6 mm round bead can lay several linear meters. For trowel applied adhesives, a notched trowel pattern will influence yield. Plan to have extra on hand for porous or uneven surfaces.
Limitations
Do not apply to surfaces that are visibly wet unless the product specifically allows damp application.
Avoid continuous water immersion unless the product is rated for that exposure.
Not all plastics are compatible; test on polypropylene, polyethylene, and PTFE if required.
Observe maximum service temperature and any movement or vibration limits appropriate to the application.
Clean up
Clean tools while wet with a suitable solvent or soapy water depending on formulation. Always read the product label and follow local regulations for disposal of leftover material and containers.
Safety
Read the label before use and keep out of reach of children. Use in a well ventilated area. Wear protective gloves and eye protection. If on skin, wash with soap and water. If in eyes, rinse cautiously and seek medical advice if irritation persists. Do not ingest. Refer to the product Safety Data Sheet for detailed information.
Storage
Store upright in a cool, dry place away from direct sunlight and heat sources. Keep the cap or nozzle tightly closed when not in use. Do not allow to freeze unless the product literature states it is freeze-thaw stable. Rotate stock to use older product first.
Troubleshooting
Poor adhesion: Check surface prep, remove contaminants, and reapply with firm pressure.
Slow cure: Verify temperature and humidity. Increase airflow or allow more time.
Excess squeeze-out: Reduce bead size or spread more evenly. Clean residue before it skins.
Frequently asked questions
Can I paint over it? Many adhesives can be overcoated once cured. Test a small area with your paint system first.
Is it suitable outdoors? Check the product label for outdoor rating. Protect fresh adhesive from rain until cured.
What is the service temperature range? Typical service ranges suit most building environments. Avoid direct flame or extreme heat.
How do I remove cured material? Mechanical methods are usually required. Work carefully to avoid damaging surrounding finishes.
Why buy from Glues Australia
We curate a focused range so you can choose faster and build better. Every product listing includes practical how to detail, compatibility guidance, and straightforward support from a team that understands trade requirements. Order with confidence and get your project moving.
Sold Out
Express Post: 1-3 Days | Standard Post: 2-5 Days
Powerful universal adhesive for most plastics. Cold welding technology for a perfect bond. Ideal for multi-purpose domestic applications, handicraft work, repairs and model building. The hard but flexible adhesive film remains transparent. Water and temperature resistant. Toluene free.
YOU CAN FIX IT!
Glues most usual plastic materials (ABS, Plexiglas®, hard PVC...), also in combination with wood, metal, glass and ceramics.
*Not suitable for PE, PP and Styrofoam.
Sold Out
Express Post: 1-3 Days | Standard Post: 2-5 Days
Ultra high-strength 2-component epoxy adhesive for the heaviest loads (up to 1700 N/cm²). Working time: 90 minutes, handling strength: 6 hours, final bond: 24 hours. Can be drilled, sanded and painted. Resistant to impact, ageing, dampness, heat and cold.
Suitable for metal, stone, concrete, marble, china, wood, glass, duro-plastics, glass-fibre reinforced plastics, rigid PVC and Styrofoam.*
Not suitable for PE, PP, PS, soft PVC.
UHU Epoxy Quick Set
High-performance 2-component epoxy adhesive for quick and reliable repairs. Dries clear. Working time: 5 minutes, handling strength: 20 minutes, final bond: 12 hours. Resistant to impact, ageing, dampness, heat and cold.
Sold Out
Express Post: 1-3 Days | Standard Post: 2-5 Days
Blue glue stick "Made in Germany" where you directly see where you glue. Applies blue and magically dries clear. With an unique screw cap that prevents glue from drying out. The glue formula consists of 70% natural ingredients (including water) and is solvent free. Glues strong, fast and durable, glides smoothly, is highly efficient and of course cold washable. For use at home, at school and in the office.
Materials
Glues paper, cardboard, photos, Styrofoam®, labels, etc.
Use and Handling Instructions
UHU stic Magic is applied with light pressure onto the materials to be glued. The parts are put together immediately after applying the glue. The blue colour disappears a few seconds after application and is completely transparent when dry.
Features:
Applies blue and magically dries clear
Glue formula with 70% natural ingredients
Glues fast, strong and durable
Screw cap prevents glue from drying out
Sold Out
Express Post: 1-3 Days | Standard Post: 2-5 Days
Ultra-fast and extremely strong universal super glue. Its liquid formula is easy to spread and flows into smallest corners and joints.
UHU Super Glue is easy to apply, bonds quickly and provides lasting, extremely strong results. You can use it on a variety of materials so it's perfect for keeping handy in the classroom at school.
You can use the glue on plastics, ceramics, wood, porcelain, metal and rubbers.
It bonds quickly for fast results.
The glue will flow into small corners and tight spaces.
The results are extremely strong and long lasting.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
PROPERTIES
Extra strong
Fast but temporarily adjustable
Does not drip
Ideal for porous materials and vertical surfaces
Dishwasher proof and water resistant
APPLICATION
SUITABLE FOR:
Ideal for small-area bonds. Glues almost all solid and flexible materials like ceramics, leather, rubber, many plastics (such as rigid PVC, ABS, PS, Plexiglas®, polycarbonate (Makrolon®), and phenolic resins (Bakelite®)), porcelain, metal, wood, cork, felt, and cloth (check suitability first). Only partly suitable for glass (over a certain period of time the bond becomes brittle, causing it to weaken). Ideal for porous materials.
NOT SUITABLE FOR:
Not suitable for PE, PP, silicone resins, PTFE, Styrofoam®, fabrics and leather clothing.
BEFORE USE:
Working conditions
Do not use at temperatures below +10 °C. The glue responds best to an air humidity level of 50-70 %.
Surface requirements
Surfaces to be glued must be clean, dry, and free of dust and grease, and must fit exactly.
Preliminary surface treatment
Any dust, oil, grease, wax or separating agent should be thoroughly removed from the surfaces to be stuck together. The best way to achieve this is to rub the parts a number of times with appropriate solvents, such as acetone (if suitable for the material – check first!). For metals and metal alloys it is usually sufficient to roughen the surface using emery paper or by grinding or brushing.
DURING USE:
Directions for use
1. To pierce the membrane, turn the cap clockwise firmly onto the tube. Tip: do not press the tube while piercing. 2. Unscrew the cap to reveal the applicator. Apply the adhesive directly from the tube, using the nozzle, as thinly as possible onto one side (too much glue slows down the curing process significantly). Press parts together immediately. After use, clean nozzle with a dry tissue and replace cap.
Advice
When glueing at low humidity, curing time can be shortened by briefly breathing onto one of the parts to be assembled. The best glueing results are reached at room temperature.
Points of attention
Contains cyanoacrylate. Bonds skin and eyelids together in seconds. If product comes into contact with the eyes, rinse immediately with plenty of water and seek medical advice. In case of contact with skin, glue can be dissolved by soaking in warm soapy water. Then apply a skin cream. May cause respiratory irritation. Avoid breathing vapours. Keep out of the reach of children.
AFTER USE:
Stains/residue
Wipe off excess glue immediately with a dry cloth. After curing, glue residue is very difficult to remove. Acetone will dissolve glue but very slowly (check suitability first).
Storage conditions
Store in a dry, cool, frost-free place. Storage below +5 °C (in refrigerator) ensures maximum shelf life.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
3 x 1g originally sealed tubes
ideal portion for one application.
in a handy storage box
reaches the smallest corners and joints
Extra strong super glue in 3 x 1g tubes, packaged in a small storage box, ensuring optimal quality for every new application. The liquid adhesive reaches the smallest corners and joints.
Materials
Glues many plastics, porcelain, ceramic, metal, wood and rubber. Not suitable for leather clothing, PE, PP nor styrofoam.
Use and Handling Instructions
Surfaces to be stuck together must fit exactly and must be dry and free of dust and grease. Apply a thin layer of adhesive to one side. The thinner the film of adhesive, the stronger the bond. Press the parts together immediately and hold in place for a short time. Breathing upon the surfaces to be stuck will speed up bonding. After use, wipe the applicator tip dry and close firmly. Will last longer if stored in a cool place.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
UHU All Purpose Adhesives Super Strong & Safe, the super strong and super fast adhesive, which is adjustable - no instant finger bonding. Suitable for virtually all flexible, solid, porous and non-porous materials. Formula patented. Withstands vibrations and tremors. Moisture and heat resistant from -50°C to +100°C.
Materials
Universal - glues porcelain, ceramic, many plastic materials, metal, wood, glass, leather, rubber, Styrofoam®, paper, cardboard.
Not suitable for leather clothing, textiles, PE and PP.
Use and Handling Instructions
Surfaces to be stuck together must be dry and free of dust and grease. Apply a thin layer of adhesive to one side. Press parts together. Glue joint remains correctable for approx. 20 seconds. The thinner the film of adhesive, the stronger the bond.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Say Goodbye to Stubborn, Sticky Messes!
Tired of wrestling with stubborn price tags that tear and leave a papery, sticky mess? Frustrated by gummy residue left behind by tape on new appliances or furniture? We've all been there, risking our fingernails and damaging surfaces trying to scrape and scrub away unwanted adhesives. It’s time to stop the struggle. Introducing Un-Du® Adhesive Remover, the ultimate solution from Glues Australia that works like magic.
This isn't just another solvent; it's a revolutionary removal system. Unlike harsh chemicals that dissolve glue and ruin your items, the Un-Du® formula cleverly works by temporarily neutralizing the adhesive. A few drops are all it takes to seep under the label or sticker, breaking the bond with the surface. Simply lift it off cleanly and effortlessly with the handy included scraper tool. The best part? Once the fast-evaporating Un-Du® formula disappears, the stickiness on the sticker returns, allowing you to reuse it somewhere else! It’s the perfect tool for repositioning labels, photos, and more.
An Essential Tool for Every Australian Home
From the kitchen to the garage, you'll find hundreds of uses for Un-Du®. It’s the one tool that’s more versatile than duct tape, designed to solve all those sticky problems that pop up in daily life. Keep a bottle handy and you'll always be prepared.
Gift Giving Made Easy: Effortlessly removes price stickers from delicate gifts like crystal vases, books, and photo frames without leaving a trace.
Clean Up Your Car: Finally get rid of that old bumper sticker from your ute or the remnants of a parking permit on your windscreen without damaging the paint or glass.
Appliance & Furniture Rescue: Safely removes warranty stickers, energy rating labels, and masking tape from new fridges, TVs, and fine wood furniture.
Household Accidents: Lifts chewing gum from carpet, tar from floors, and crayon marks from walls with remarkable ease.
The Ultimate Office & Warehouse Productivity Hack
Streamline your workflow and maintain a clean, professional workspace. Un-Du® is an indispensable asset for any office, mailroom, or warehouse environment, saving you time, money, and frustration.
Package & Mail Management: Open self-sealing envelopes and padded mailers without tearing them, perfect for retrieving contents or reusing packaging.
File & Asset Organisation: Easily remove and replace labels on files, shelves, computer disks, and office equipment without leaving a sticky, dirt-collecting residue.
Mistake Correction: Quickly lifts correction fluid (White Out) from documents without smudging or tearing the paper.
Workspace Maintenance: Removes old tape marks from desks, partitions, and windows, keeping your office looking pristine.
A Must-Have for Crafters and Memory Keepers
Your precious memories and delicate projects deserve the best care. The Un-Du® formula is completely acid-free and photo-safe, making it the trusted choice for hobbyists, scrapbookers, and archivists who demand perfection and preservation.
Scrapbooking Perfection: Safely lift and reposition photos in albums and scrapbooks without causing fading, yellowing, or damage.
Model Making: Remove masking tape from delicate models without lifting paint or leaving residue.
Paper Crafts: Adjust stickers and embellishments on acid-free and lignin-free papers with total confidence.
Stop struggling and start un-sticking the clean, simple, and safe way. Add Un-Du® Adhesive & Sticker Remover to your cart today and discover a world free from sticky situations!
Product Specifications
Brand: Un-Du®
Product Name: Adhesive & Sticker Remover
Formula: Acid-Free, Photo-Safe, Quick-Evaporating Solvent
Key Feature: Temporarily neutralizes adhesives, allowing for the reuse of most stickers and labels after evaporation.
Residue: Leaves no oily, greasy, or sticky residue behind.
Tool: Comes with an attached, non-scratching, integrated scraper tool for easy lifting.
Common Applications:
Sticker & Label Removal
Tape & Decal Removal
Price Tag Removal
Gum & Tar Cleaning
Correction Fluid (White Out) Lifting
Opening Sealed Envelopes
Safe For Use On Surfaces Including:
Glass & Plastics
Fine Wood Furniture
Metals
Carpets & Upholstery
Delicate Fabrics
Photos
Acid & Lignin-Free Papers
Painted Surfaces & Wallpaper
And much more!
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
The UNi-PRO Real Good Scrapers are a comprehensive range of scrapers, perfect for DIY jobs such as removing flaky paint or silicone. The blades have been extremely durable and reliable in various weather conditions and over time. With the scraper being made from high quality German steel that has resistant to corrosion, your professional tool will last just as long as you do!
![Timbermate Woodfiller putty crack filler Interior 2Kg [Jarrah]](//gluesaustralia.com.au/cdn/shop/files/9315284002000.jpg?v=1754811488&width=645)
![Tommy Tape Self Fusing Silicone Tape Seals And Repairs Waterproof Insulates [3 Pack]](//gluesaustralia.com.au/cdn/shop/files/9315284530374_556be8c2-fd79-4d44-bfb3-029f3b567466.jpg?v=1754716329&width=645)
![Tommy Tape Self Fusing Silicone Tape Seals And Repairs Waterproof Insulates [3 Pack]](//gluesaustralia.com.au/cdn/shop/files/93152845.png?v=1754716329&width=645)
![Tommy Tape Self Fusing Silicone Tape Seals And Repairs Waterproof Insulates [Black Grip x 1.5m]](//gluesaustralia.com.au/cdn/shop/files/949_1005_f9e8bad8-cc2d-4f12-888b-f7be3932182b.jpg?v=1754716338&width=645)
![Tommy Tape Self Fusing Silicone Tape Seals And Repairs Waterproof Insulates [Black Grip x 1.5m]](//gluesaustralia.com.au/cdn/shop/files/93152845_75d61b67-9ac6-4739-9648-1e850e68af71.png?v=1754716338&width=645)
![Tommy Tape Self Fusing Silicone Tape Seals And Repairs Waterproof Insulates [Black x 3m]](//gluesaustralia.com.au/cdn/shop/files/9315284530305_0485e2cc-4f7e-46c2-94ae-dee297210481.jpg?v=1754716346&width=645)
![Tommy Tape Self Fusing Silicone Tape Seals And Repairs Waterproof Insulates [Black x 3m]](//gluesaustralia.com.au/cdn/shop/files/93152845_50821584-e9cf-45b6-9528-1e997cfe48d7.png?v=1754716346&width=645)
![Tommy Tape Self Fusing Silicone Tape Seals And Repairs Waterproof Insulates [Clear x 3m]](//gluesaustralia.com.au/cdn/shop/files/949_1003_d0705a81-d0df-43a8-b8d2-cd06f5c78769.jpg?v=1754716354&width=645)
![Tommy Tape Self Fusing Silicone Tape Seals And Repairs Waterproof Insulates [Clear x 3m]](//gluesaustralia.com.au/cdn/shop/files/93152845_733528b0-7c24-46e0-889e-87698aafcb17.png?v=1754716354&width=645)
![Tommy Tape Self Fusing Silicone Tape Seals And Repairs Waterproof Insulates [Grey x 3m]](//gluesaustralia.com.au/cdn/shop/files/949_1004_b7e3fa7f-b596-4427-b05e-1d6d905aafa9.jpg?v=1754716362&width=645)
![Tommy Tape Self Fusing Silicone Tape Seals And Repairs Waterproof Insulates [Grey x 3m]](//gluesaustralia.com.au/cdn/shop/files/93152845_5bffff98-306e-4768-8b68-890bdca140bb.png?v=1754716362&width=645)
![Tommy Tape Self Fusing Silicone Tape Seals And Repairs Waterproof Insulates [Red x 3m]](//gluesaustralia.com.au/cdn/shop/files/949_1002_13c9931e-09ce-4d00-a35f-0df6977453aa.jpg?v=1754716370&width=645)
![Tommy Tape Self Fusing Silicone Tape Seals And Repairs Waterproof Insulates [Red x 3m]](//gluesaustralia.com.au/cdn/shop/files/93152845_54ba8b96-b758-4a94-8ba2-6b524d94e6ea.png?v=1754716370&width=645)
![Tommy Tape Self Fusing Silicone Tape Seals And Repairs Waterproof Insulates [White x 3m]](//gluesaustralia.com.au/cdn/shop/files/9315284530329_412e3d45-40a8-4eca-9ed6-191f389472d4.jpg?v=1754716380&width=645)
![Tommy Tape Self Fusing Silicone Tape Seals And Repairs Waterproof Insulates [White x 3m]](//gluesaustralia.com.au/cdn/shop/files/93152845_0ee281c8-0366-40a5-bb6c-b1a12d613ac2.png?v=1754716380&width=645)
![Timbermate Woodfiller putty crack filler Interior 2Kg [Jarrah]](http://gluesaustralia.com.au/cdn/shop/files/9315284002000.jpg?v=1754811488&width=645)
![Tommy Tape Self Fusing Silicone Tape Seals And Repairs Waterproof Insulates [3 Pack]](http://gluesaustralia.com.au/cdn/shop/files/9315284530374_556be8c2-fd79-4d44-bfb3-029f3b567466.jpg?v=1754716329&width=645)
![Tommy Tape Self Fusing Silicone Tape Seals And Repairs Waterproof Insulates [3 Pack]](http://gluesaustralia.com.au/cdn/shop/files/93152845.png?v=1754716329&width=645)
![Tommy Tape Self Fusing Silicone Tape Seals And Repairs Waterproof Insulates [Black Grip x 1.5m]](http://gluesaustralia.com.au/cdn/shop/files/949_1005_f9e8bad8-cc2d-4f12-888b-f7be3932182b.jpg?v=1754716338&width=645)
![Tommy Tape Self Fusing Silicone Tape Seals And Repairs Waterproof Insulates [Black Grip x 1.5m]](http://gluesaustralia.com.au/cdn/shop/files/93152845_75d61b67-9ac6-4739-9648-1e850e68af71.png?v=1754716338&width=645)
![Tommy Tape Self Fusing Silicone Tape Seals And Repairs Waterproof Insulates [Black x 3m]](http://gluesaustralia.com.au/cdn/shop/files/9315284530305_0485e2cc-4f7e-46c2-94ae-dee297210481.jpg?v=1754716346&width=645)
![Tommy Tape Self Fusing Silicone Tape Seals And Repairs Waterproof Insulates [Black x 3m]](http://gluesaustralia.com.au/cdn/shop/files/93152845_50821584-e9cf-45b6-9528-1e997cfe48d7.png?v=1754716346&width=645)
![Tommy Tape Self Fusing Silicone Tape Seals And Repairs Waterproof Insulates [Clear x 3m]](http://gluesaustralia.com.au/cdn/shop/files/949_1003_d0705a81-d0df-43a8-b8d2-cd06f5c78769.jpg?v=1754716354&width=645)
![Tommy Tape Self Fusing Silicone Tape Seals And Repairs Waterproof Insulates [Clear x 3m]](http://gluesaustralia.com.au/cdn/shop/files/93152845_733528b0-7c24-46e0-889e-87698aafcb17.png?v=1754716354&width=645)
![Tommy Tape Self Fusing Silicone Tape Seals And Repairs Waterproof Insulates [Grey x 3m]](http://gluesaustralia.com.au/cdn/shop/files/949_1004_b7e3fa7f-b596-4427-b05e-1d6d905aafa9.jpg?v=1754716362&width=645)
![Tommy Tape Self Fusing Silicone Tape Seals And Repairs Waterproof Insulates [Grey x 3m]](http://gluesaustralia.com.au/cdn/shop/files/93152845_5bffff98-306e-4768-8b68-890bdca140bb.png?v=1754716362&width=645)
![Tommy Tape Self Fusing Silicone Tape Seals And Repairs Waterproof Insulates [Red x 3m]](http://gluesaustralia.com.au/cdn/shop/files/949_1002_13c9931e-09ce-4d00-a35f-0df6977453aa.jpg?v=1754716370&width=645)
![Tommy Tape Self Fusing Silicone Tape Seals And Repairs Waterproof Insulates [Red x 3m]](http://gluesaustralia.com.au/cdn/shop/files/93152845_54ba8b96-b758-4a94-8ba2-6b524d94e6ea.png?v=1754716370&width=645)
![Tommy Tape Self Fusing Silicone Tape Seals And Repairs Waterproof Insulates [White x 3m]](http://gluesaustralia.com.au/cdn/shop/files/9315284530329_412e3d45-40a8-4eca-9ed6-191f389472d4.jpg?v=1754716380&width=645)
![Tommy Tape Self Fusing Silicone Tape Seals And Repairs Waterproof Insulates [White x 3m]](http://gluesaustralia.com.au/cdn/shop/files/93152845_0ee281c8-0366-40a5-bb6c-b1a12d613ac2.png?v=1754716380&width=645)
