DTA

• Fluoride based formula controls slipping on ceramic, mosaic and quarry tiles, terrazzo and unpainted concrete floors • Alters surface texture yet maintains the appearance of the floor • Coverage: 10sqpm per meter

Read more less

The DTA Silicone Remover is a dual-action hand tool for stripping cured silicone, acrylic sealant and leftover adhesive, supplied as a single tool in a blister pack. It is aimed at tilers, renovators and DIYers who need to clear old joints and surfaces before resealing, retiling or refinishing.About the toolThe tool has a right-angled blade that works on both the push and the pull stroke, so you can choose the direction that gives the best leverage in a given joint. The blade is described as flexible, which helps it lift material without gouging the surface underneath. A contoured rubber handle gives a comfortable, secure grip and helps reduce hand fatigue during longer clean-out jobs.Where to use itIndoors: clearing old silicone or acrylic beads around tiles, baths, basins, benchtops and similar joints, and lifting adhesive residue (such as leftover double-sided tape) when preparing a surface for new work.Outdoors: the tool is a manual scraper with no chemical content, so it can also be used on exterior joints and surfaces when old sealant needs to be removed before resealing.It is designed for removing silicone, acrylic and adhesive residues from surfaces and tiles during surface preparation.How to use itWork on a dry surface. If the old bead is well bonded, cutting along its edges with a utility knife first can make removal easier. Place the angled blade at the edge of the bead and push or pull along the joint, using whichever stroke gives better control. Lift away the loosened material, then finish by wiping or cleaning the surface so it is ready for the new sealant or adhesive. Always follow the instructions of the product you are applying next.Important notesThis is a mechanical scraping tool. It removes the bulk of cured material but may leave a thin film of residue, which may need a suitable cleaner or solvent that is safe for your surface. Test on an inconspicuous spot first if you are working on delicate or easily scratched finishes. Use steady, controlled pressure so the blade does not slip.Specifications Brand DTA Product Silicone Remover Pack 1 tool, blister packed Colour Black Type Dual-action hand tool with right-angled blade Handle Contoured rubber grip Tool size (approx.) 170 mm high x 80 mm wide x 35 mm deep Removes Silicone, acrylic and adhesive residue Use Surface and tile preparation SafetyTake care with the blade edge, keep your free hand clear of the cutting path, and keep the tool out of reach of children. Wear gloves and eye protection when scraping, particularly when working with a utility knife or removing brittle material. Refer to the Safety Data Sheet (SDS) for full details.

Read more less

The DTA Boss Grout Clean Up System Kit is a professional-grade cleaning solution designed to make post-grouting clean-up fast and effortless. Ideal for both tradespeople and DIYers, this all-in-one system helps you remove grout haze and residue from tiles after grouting. What’s Included: Heavy-duty cleaning sponge with handle High-capacity rinse bucket with roller Surface Preparation: Before use, ensure that the tiled surface has set appropriately based on grout manufacturer instructions. The grout should be partially cured but not fully hardened — typically 10–30 minutes after application. Remove excess grout with a rubber float before using this cleanup system. Application Instructions: Fill the rinse bucket with clean water up to the indicated level. Use the included sponge to gently clean the surface in a diagonal motion. Rinse sponge regularly by rolling it over the inbuilt rollers to remove grout particles. Repeat the process until the grout haze is removed and the tile surface is clean. Coverage: Cleans up to approximately 25–50m² per fill depending on tile texture and grout thickness. Drying Time: Tiles are generally clean and dry within 30–60 minutes of cleanup depending on ambient temperature and humidity. Ensure proper ventilation for best results. Clean-Up: Empty the bucket, rinse the sponge and components with clean water. Dry thoroughly before storing to extend product life. Technical Data: Rollers: Dual high-strength plastic rollers Sponge: Extra absorbent and replaceable This system is compatible with most grout types including cementitious and epoxy grouts. For stubborn epoxy residue, use in conjunction with a suitable epoxy grout cleaner.

Read more less