Safety & PPE

The Energizer Vision HD Metal LED Torch is a compact, hard-wearing handheld light that puts out up to 400 lumens and lets you switch between a focused beam and a wide area glow with one press. It runs on two AA batteries (included), so it is ready to go straight out of the pack for the home, the vehicle or the workplace.About the productThe torch uses Energizer MAXVIZ technology, which is designed to give a natural-looking beam colour with good contrast for clearer, high-definition vision. Digital Focus lets you change the beam from a tight spot to a broad flood with one hand, which helps with both long-distance viewing and close-up work. The body is made from aircraft grade aluminium and is rated IPX4, so it copes with splashes from any direction. It has been drop tested from 1 metre.Where to use itIndoors: power outages, checking the switchboard, roof cavities, under sinks, cupboards and the garage or workshop.Outdoors: camping, fishing, walking the dog, yard checks at night and keeping in the car or emergency kit.Features and what is included High mode: 400 lumens for about 4 hours, with a beam distance of 115 m Low mode: 50 lumens for about 21 hours, with a beam distance of 35 m Strobe mode for signalling One press Digital Focus to move between spot and area light Push button switch for easy mode changes Aircraft grade aluminium construction in a silver finish IPX4 water resistant (splash resistant, not waterproof or for submersion) Includes 1 torch and 2 x AA batteries How to use itCheck that the batteries are installed correctly, then press the push button to turn the torch on and cycle through the light modes. Use the Digital Focus control to switch between the focused beam and the wider area light. Use High mode when you need maximum brightness and distance, and Low mode when you want longer run time.Important notesRun times and beam distances are quoted by the manufacturer for the stated modes and will vary with battery type, condition and temperature. IPX4 protects against splashing water only, so do not submerge the torch. This is a non-rechargeable torch that uses standard AA batteries.Specifications Brand Energizer Product Vision HD Metal LED Torch 2AA Model number PMHH21 Colour Silver Material Aircraft grade aluminium Light source LED (3 LEDs) Output (High) 400 lumens, about 4 hours, 115 m beam Output (Low) 50 lumens, about 21 hours, 35 m beam Modes High, Low, Strobe, with Digital Focus Water resistance IPX4 Drop resistance 1 m Power 2 x AA batteries (included) Switch Push button Use Indoor and outdoor, handheld Care and storageWipe the torch clean with a dry or lightly damp cloth and dry it after exposure to splashes. Switch it off after use and remove the batteries if you will not use it for a long period to help prevent leakage. Replace both batteries at the same time with the same type, and store the torch in a cool, dry place out of reach of young children.

Read more less

Trojan Garden Knee Pads give your knees a tougher, more comfortable setup for gardening and landscaping, with a hard-wearing nylon body and an impact resistant shell. They strap on and stay put, so you can kneel at the garden bed, paving or lawn edge without constantly readjusting.About the productThe knee pads use a heavy-duty nylon fabric paired with an impact resistant plastic shell that is built to handle rough, rugged ground. Two elastic straps on each pad hold it securely in place while you work, and the compact design keeps things practical for everyday garden jobs.Where to use itIndoors: occasional kneeling jobs around the home, such as work in the garage or shed where a firm surface is hard on the knees.Outdoors: planting, weeding, mulching, turfing, edging, paving and general landscaping tasks.How to use it Position each pad over the front of the knee with the shell facing forward. Fasten both elastic straps so the pad sits firmly without restricting movement or circulation. Check the fit again after a few minutes of work and adjust if the pads shift. Take the pads off during breaks if you will be on your feet for long periods. Important notesThese knee pads are designed for gardening and landscaping use. They are not sold as certified protective equipment for specialised trade or industrial work, so choose rated gear if your job requires it. Make sure the straps are comfortably snug rather than overly tight.Specifications Brand Trojan Product Garden Knee Pads Model number 664144 Pack Pair of knee pads Materials Nylon fabric with plastic shell Fastening Dual elastic straps Product dimensions 260 x 160 x 60 mm Use Gardening and landscaping Care and storageBrush off soil and debris after use and wipe the shell and fabric clean with a damp cloth. Allow the pads to dry fully before storing them in a cool, dry place out of direct sunlight. Check the straps and shell from time to time and replace the pads if they show signs of damage.

Read more less

Cyclone Knee Pads are a hard-wearing set of wearable knee protection for gardening and landscaping, with a large PVC impact shell over a cushioned EVA comfort zone. They help take the strain off your knees during long stints of planting, weeding, paving and general yard work.About the productThe outer is made from tough Oxford nylon fabric for durability. An oversized PVC shell spreads the load from impacts, and the EVA padding underneath cushions the knee cap. Two straps hold the pads in place, and an adjustable quick-release strap lets you take them off easily when you finish.Where to use themIndoors: general home jobs that involve time on your knees, such as cleaning, laying flooring underlay or working under benches.Outdoors: garden beds, lawn edging, pathways, retaining walls, paving and other landscaping tasks.Features Tough Oxford nylon fabric Extra-large PVC impact shell EVA comfort zone to cushion the knee cap Dual straps for better support Adjustable quick-release strap How to use themPosition each pad over your knee cap, fasten both straps and adjust the quick-release strap until the pad sits snugly without restricting circulation or movement. Check the fit again after moving around, and release the quick-release strap to remove them.Important notesThese knee pads are designed for garden and landscaping use. Check the fit and strap condition before each use, and stop using them if the straps, fabric or shell become damaged.Specifications Brand Cyclone Product Garden Knee Pads Materials PVC, Oxford fabric, elastic, EVA gel Impact shell Extra-large PVC Straps Dual straps with adjustable quick-release strap Pack dimensions 170 x 90 x 230 mm Use Gardening and landscaping Care and storageBrush off dirt and wipe the pads clean with a damp cloth after use, then let them dry fully before storing. Keep them in a cool, dry place away from prolonged direct sunlight and sharp objects.

Read more less

Citeco Heavy Duty Earmuffs are a Class 5 hearing protector built for loud work sites, with a padded frame designed to stay comfortable through long stretches of wear. They suit tradies, workshop users and serious DIYers who spend time around noisy tools and machinery.About the productThese earmuffs conform to the Australian and New Zealand hearing protector standard AS/NZS 1270:2002. They carry a Class 5 rating with an SLC(80) value of 31dB. The SLC(80) figure is the noise reduction that at least 80% of wearers can expect when the muffs are fitted correctly. The padded frame spreads pressure on the head, and stainless steel telescopic adjustment lets you set the fit to suit different head sizes.Where to use themIndoors: workshops, factories and manufacturing environments, or any room where power tools and machinery run for long periods.Outdoors: construction sites, demolition and other loud jobs where high noise levels are a regular part of the work.How to use them Place one cup over each ear so the cushions sit flat against your head and fully cover your ears. Slide the telescopic arms up or down until the fit is snug but comfortable. Keep hair, glasses arms, hats or other items out from under the cushions, as they can break the seal and reduce protection. Put the muffs on before you enter the noisy area and keep them on for the whole time you are exposed. Important notesHearing protection only works when it is worn correctly and for the full period of noise exposure. Choose the right class of protector for the noise level on your job. Check the cushions and frame regularly and replace the muffs if they are cracked, worn or no longer fit firmly. Stated noise reduction values are tested under standard conditions, so actual results depend on fit.Specifications Brand Citeco Product Heavy Duty Earmuffs Model number 30125713 Pack 1 pair of earmuffs Hearing protection class Class 5 Noise reduction SLC(80) 31dB Standard AS/NZS 1270:2002 Frame Padded frame with stainless steel telescopic adjustment Product dimensions 98 mm wide x 190 mm high x 160 mm deep Weight 0.32 kg Use High noise environments such as construction and manufacturing Care and storageWipe the cups and cushions with a damp cloth and mild soapy water, then let them dry fully before storing. Keep the earmuffs in a clean, dry place away from direct sunlight, heat and chemicals, and avoid squashing the cups so the cushions keep their shape. Keep out of reach of young children.

Read more less

The 3M High Performance Ear Muffs (EMU44PR) are an Australian made, headband-style hearing protector with bright safety orange acoustic cups, rated Class 5 with 29dB(A) noise reduction. The large cups are designed for comfort over long stretches, making them a practical choice for trade and workshop use where medium to high noise protection is needed.About the productThe cups are moulded from tough ABS and sit on a glass reinforced nylon headband. The headband is adjustable, so you can set the fit to suit your head. The earmuffs are certified to AS/NZS 1270:2002 and suit general construction environments and other noisy workplaces. They are not a corded or electronic model, so there is nothing to charge or plug in.Where to use itIndoors: workshops and job sites where band saws, pneumatic drills and similar tools are running.Outdoors: concrete cutting, ride-on mowing and other noisy site or yard work.How to use it Sits over the head, with a cup over each ear and the headband across the top of the head. Adjust the headband until both cups seal comfortably around your ears. Keep the cushions clear of hair, hats and anything else that could break the seal. Wear them for the whole time you are exposed to noise, because taking them off even briefly reduces the protection. Supplied as one pair of earmuffs. A carry case is not included. Important notesThe ear cushions are not replaceable, so replace the whole unit if the cushions, cups or headband become worn, cracked or damaged. These earmuffs are not dielectric, so do not rely on them around live electrical work. Hearing protection only works properly when it is fitted correctly and worn consistently.Specifications Brand 3M Product High Performance Earmuffs Model number EMU44PR Pack 1 pair Colour Orange Noise reduction Class 5, 29dB(A) Materials ABS cups, glass reinforced nylon headband Fit Adjustable headband Replaceable pads No Corded No Dielectric No Carry case included No Standard AS/NZS 1270:2002 Origin Australian made Care and storageWipe the cups and cushions clean with a damp cloth after use and let them dry. Store in a clean, dry place away from direct heat and heavy objects that could bend the headband. Check the cushions and headband before each use and replace the earmuffs if you notice any damage.

Read more less

Citeco Anti Fog Safety Goggles give you clear, comfortable eye protection for workshop, building and DIY jobs, with an anti fog treatment and an adjustable headband for a secure fit. They are made to AS/NZS 1337.1:2010, the Australian and New Zealand standard for eye protection, so they suit a wide range of everyday tasks where flying particles or dust are a concern.About the productThese goggles have a clear lens with an anti fog treatment to help you keep a clear view when working in warm or humid conditions. The lens also offers UV protection, which is handy when you are working outdoors. An adjustable headband lets you tighten or loosen the fit to suit different head sizes and stay comfortable through longer wear.Where to use itIndoors: workshop and garage projects, sanding, drilling, cutting and general DIY or maintenance tasks.Outdoors: yard work, building and renovation jobs where a clear lens with UV protection is useful.How to use it Place the goggles over your eyes and pull the headband around the back of your head. Adjust the headband until the goggles sit snugly and comfortably against your face. Check that the lens is clean and undamaged before each use. Wear them for the whole task, not just when the work starts. Important notesChoose eye protection that suits the task you are doing, and check the requirements for your job or worksite. Replace the goggles if the lens becomes scratched, cracked or cloudy, as this can reduce both vision and protection. They are not a substitute for a welding helmet or other specialist protective equipment.Specifications Brand Citeco Product Anti Fog Safety Goggles Pack 1 x safety goggles Lens Clear Features Anti fog treatment, UV protection, adjustable headband Standard AS/NZS 1337.1:2010 Use Indoor and outdoor Care and storageRinse off dust and debris and clean the lens with mild soapy water and a soft cloth, as rough cloths or abrasive cleaners can scratch it. Let the goggles air dry, then store them somewhere clean, dry and out of direct sunlight so the lens stays protected. Keep out of reach of children.

Read more less

The Citeco Clear Hybrid Safety Glasses / Goggles give you two styles of eye protection in one compact set, with anti fog and anti scratch treatment for clearer, longer-lasting vision on DIY and building jobs. They are made to conform to AS/NZS 1337.1:2010, the Australian and New Zealand standard for non-prescription eye protectors.About the productThese clear-lens safety eyewear pieces combine an anti fog treatment with an anti scratch coating, and the lens material offers UV resistance. A detachable foam frame, together with an interchangeable adjustable strap and arms, lets you set them up the way you prefer to wear them and adjust the fit for different users.Where to use itIndoors: workshop projects, sanding, cutting, drilling, assembly and general home maintenance where eye protection is needed.Outdoors: yard work, building and renovation tasks where dust and debris are a concern.How to use it Choose the glasses style with arms, or fit the detachable foam frame and strap for a goggle-style fit. Adjust the strap or arms so the eyewear sits snugly and comfortably, with no gaps around the eyes. Wear them for the whole task, and put them on before the work starts. Clear lenses suit most indoor and outdoor work in normal light. Important notesCheck the markings on the product itself to confirm the impact and optical class suit your task. These are general-purpose protective eyewear, so choose a purpose-designed product for specialist work such as welding or chemical splash protection. Replace the eyewear if the lens is cracked, deeply scratched or damaged.Specifications Brand Citeco Product Clear Hybrid Safety Glasses / Goggles Model number 30126024 Pack Single Lens Clear Lens treatment Anti fog, anti scratch, UV resistant Fit Detachable foam frame, interchangeable adjustable strap and arms Standard AS/NZS 1337.1:2010 Packaged dimensions 60 x 170 x 60 mm Weight 0.045 kg Care and storageRinse off dust and grit with clean water, then clean the lenses with mild soapy water and a soft cloth to avoid scratching the coating. Avoid abrasive cleaners and rough paper towels. Store in a clean, dry place away from direct heat and sunlight, and keep out of reach of children.

Read more less

Citeco Clear Anti Scratch Safety Glasses are a simple, lightweight pair of clear eye protectors for everyday DIY and building jobs. They suit anyone who needs dependable eye cover on the tools, in the shed or on site, without paying for extra features they won't use.About the productThese glasses have clear lenses with an anti scratch coating, which helps them stay clear and usable through regular handling. The lenses are also UV resistant. Soft rubber tipped arms add comfort, and the lightweight build makes them easy to wear for longer tasks. They conform to Australian/New Zealand Standard AS/NZS 1337.1:2010 for eye protection.Where to use themIndoors: general workshop and garage tasks, sanding, drilling, cutting and cleaning jobs around the home.Outdoors: building, fencing, garden maintenance and other DIY work where eye protection is needed.Features Clear lenses for good visibility in most work conditions Anti scratch coating UV resistant Soft rubber tipped arms Lightweight design Conforms to AS/NZS 1337.1:2010 How to use themPut the glasses on before you start work and make sure they sit snugly and comfortably over your nose and ears. Check the lenses and frame for cracks, deep scratches or damage before each use. Wear them for the whole task, including when you clean up, as debris can still be thrown up.Important notesThese are clear glasses with no anti fog treatment, so they may mist up in humid or hot conditions. Replace them if the lenses are cracked, heavily scratched or the frame is damaged. Choose the right type of eye protection for the job, and use a full goggle or face shield where the task calls for it.Specifications Brand Citeco Product Clear Anti Scratch Safety Glasses Pack 1 pair Lens Clear, anti scratch coating, UV resistant Arms Soft rubber tipped Standard AS/NZS 1337.1:2010 Packaged size 200 x 80 x 80 mm Use DIY and building tasks Care and storageRinse off dust and grit with clean water, then clean the lenses with a soft, lint-free cloth to avoid scratching. Avoid harsh solvents and abrasive cleaners. Store the glasses somewhere clean and dry, away from direct heat and from tools that could scratch the lenses.

Read more less

Citeco Clear Anti-Fog Anti-Scratch Safety Glasses are a lightweight, everyday eye protection option for DIY jobs, building tasks and general workshop use. They pair clear lenses with an anti-fog treatment and a scratch-resistant coating, and they come with a retaining strap so they stay handy around your neck.About the productThese glasses are made to conform to AS/NZS 1337.1:2010, the Australian and New Zealand standard for eye protectors. The clear lenses have an anti-fog treatment to help keep your view clear while you work, and an anti-scratch coating to help the lenses cope with everyday handling. The lenses also resist UV. Soft rubber-tipped arms and a soft rubber nose piece are designed to sit comfortably on the face.Where to use itIndoors: sanding, drilling, cutting, assembling furniture, workshop and renovation tasks.Outdoors: garden jobs, general building and maintenance work, where clear lenses with UV resistance are useful.Features Clear lenses, so colours stay true and you can use them in lower light Anti-fog treatment Anti-scratch lens coating UV resistant lenses Soft rubber-tipped arms and nose piece Retaining strap included Conforms to AS/NZS 1337.1:2010 How to use itFit the glasses so the lenses sit squarely in front of your eyes and the arms rest comfortably over your ears. Attach the retaining strap to the arm ends if you want to keep them around your neck between tasks. Put them on before you start work and keep them on until the job is finished and the area is clear.Important notesAnti-fog and anti-scratch treatments help performance but do not make the lenses scratch-proof or fog-proof in every condition. Check that the glasses suit the task you are doing, as specialised work such as welding or laser use needs purpose-made eye protection. Replace the glasses if the lenses become scratched, cracked or otherwise damaged.Specifications Brand Citeco Product Safety Glasses Clear Anti-Fog Anti-Scratch Lens colour Clear Anti-fog treatment Yes Anti-scratch coating Yes UV protection Yes Arms and nose piece Soft rubber tipped Retaining strap Included Standard AS/NZS 1337.1:2010 Care and storageRinse off dust and grit before wiping, then clean the lenses with lukewarm water, a little mild detergent and a soft cloth. Avoid abrasive cleaners or rough cloths, which can mark the lens surface. Store the glasses in a clean, dry place away from direct heat, with the lenses protected from contact with tools and other hard objects.

Read more less

3M Over-the-Glass Safety Eyewear in clear is a simple way to add eye protection when you already wear prescription glasses, with no need to swap to a separate pair. It sits comfortably over your everyday eyeglasses and helps keep dust and small flying particles away from your eyes and your lenses.About the productThese over-spectacles pair a clear frame with clear lenses, so you keep a natural view of the work in front of you. Built-in side shields add protection from the front and the sides. The lenses are impact resistant and scratch resistant, so they keep performing from one project to the next. 3M states the lenses provide 99.9% UV protection, and the eyewear has been performance tested to Australian Standard AS/NZS 1337.Where to use itIndoors: workshop and shed jobs such as woodworking, sanding, drilling and general cutting, or anywhere small particles can fly. 3M rates this model as ideal for indoor use.Outdoors: the maker also pitches it for lighter tasks such as mowing the lawn. For heavy outdoor or high-impact work, choose eyewear rated for that job.How to use it Put your prescription glasses on first, then slide the safety eyewear over the top. Check that the side shields sit snugly and that nothing pushes your own glasses out of position. Wear them for the whole task, not just while the tool is running. Built-in side shields give front and side coverage. Clear frame and clear lenses for good visibility in normal indoor light. Important notesThese are designed to be worn over prescription eyeglasses. Fit can vary with frame size and shape, so try them on with your own glasses before starting a job. Replace the eyewear if the lenses are cracked, deeply scratched or the frame is damaged. They are not a substitute for a full face shield or goggles where a task calls for one.Specifications Brand 3M Product Over-the-Glass Safety Eyewear (Safety Glasses Overspecs) Model number 47110H1-C Pack 1 pair Frame colour Clear Lens colour Clear Side protection Built-in side shields UV protection Yes, 99.9% (per 3M) Standard Performance tested to AS/NZS 1337 Recommended use Ideal for indoor use Care and storageWash the lenses in warm water and let them air dry, or dry with a soft cloth. Avoid rough or abrasive cloths that could scratch the surface. Store them somewhere clean and dry, away from tools and sharp objects, so the lenses stay clear for the next job.

Read more less

The Mechanix Wear SpeedKnit S2EC06 is a thin, close-fitting cut resistant glove for people who need real blade protection without losing feel, supplied here in size Medium. It pairs an 18-gauge knit shell with a grippy coated palm, so it suits detailed hands-on work around sharp edges, from the workshop to the garden.About the productThe shell is a machine-knit blend of HPPE and steel, which gives ANSI A4 blade-cut resistance in a fine 18-gauge knit that keeps good dexterity. The working side has a water-based urethane coating that stays tactile and holds grip in both dry and wet conditions. The coating is touchscreen capable, so you can use a phone or tablet without taking the gloves off. A compression cuff helps keep the fit snug and keeps dirt and debris out.Where to use itIndoors: workshop and renovation tasks, handling sheet metal offcuts, glass-edged or sharp-edged materials, assembly work and general trade jobs where cuts are a risk.Outdoors: gardening and landscaping jobs that involve sharp edges, handling cut materials, and general site or yard work in dry or damp conditions.How to use it 18-gauge HPPE and steel knit shell for protection against cuts and skin abrasions Water-based urethane palm coating for a tactile, secure grip when dry or wet Touchscreen capable working side Compression cuff for a secure fit Silicone free, REACH compliant and made with OEKO-TEX Standard 100 compliant textiles Machine washable and dryable Choose a size that fits snugly without bunching, as a close fit gives the best feel and control. Pull the cuff up firmly and check the gloves for wear or damage before each job.Important notesCut resistant gloves reduce the risk of cuts but do not make hands cut-proof. Take extra care around moving machinery, power tools and rotating parts, because a glove can be caught and pulled in. They are not intended as protection from chemicals, heat or high-risk puncture hazards. Replace the gloves if the knit is cut, worn through or the coating has broken down.Specifications Brand Mechanix Wear Product SpeedKnit S2EC06 Cut Resistant Gloves Size Medium Pack 1 pair Shell HPPE and steel knit, 18 gauge Palm coating Water-based urethane Cut resistance ANSI A4 EN 388:2016 rating 4X41D Touchscreen Capable Cuff Compression cuff Care Machine washable and dryable Care and storageWash when dirty, following the care label on the gloves, and allow them to dry fully before storing. Keep them in a clean, dry place away from direct sunlight and sharp tools that could snag the knit. Inspect them regularly and replace them once they show damage or wear.

Read more less

The Energizer HDL10 LED Headtorch is a lightweight, hands-free light that puts 250 lumens of bright white LED output wherever you are looking, with three AAA batteries already included. It suits camping, hiking and cycling, and it is just as handy for jobs around the home, garage or worksite when you need both hands free.About the productThe HDL10 uses a white LED with two brightness settings, selected with a single push button. High mode gives 250 lumens with a beam that reaches about 60 metres, and low mode stretches the battery life for close-up tasks. The lens is shatterproof, the body is IPX4 water-resistant against splashes, and the head pivots so you can aim the light without moving your whole head. An anti-glare design and an adjustable head strap keep it comfortable to wear.Where to use itIndoors: under the sink, in the roof space or under the house, in the garage, during blackouts, and for fiddly repair or maintenance work.Outdoors: camping, hiking, cycling, fishing, walking the dog and general night-time tasks around the yard or campsite.How to use it Slide the strap over your head and adjust it for a snug, comfortable fit. Press the push button once to switch on, again to change between high and low, and again to turn off. Tilt the pivoting head up or down to direct the beam where you need it. Runs on 3 x AAA alkaline batteries, which are supplied in the pack. Important notesRun times are quoted for high mode with fresh alkaline batteries and will vary with battery quality, temperature and use. IPX4 protects against splashing water only, so do not submerge the headtorch. Impact resistance is rated for drops from about 1 metre. Replace all three batteries together and remove them if the light will be stored for a long period.Specifications Brand Energizer Product HDL10 LED Headtorch Pack 1 headtorch with 3 x AAA batteries Light source White LED Output (high) 250 lumens, up to 7 hours run time Output (low) 25 lumens, up to 40 hours run time Beam distance (high) 60 m Modes High, low, off (push button) Water resistance IPX4 Impact resistance 1 m drop Colour temperature 5000K, CRI 75 Power 3 x AAA alkaline batteries (included) Headtorch weight 57 g Strap Adjustable head strap, pivoting head Care and storageWipe the headtorch clean with a damp cloth and let it dry before storing. Keep it in a cool, dry place away from direct heat. Remove the batteries if it will not be used for a while, and dispose of used batteries at a battery recycling point. Keep batteries out of reach of young children.

Read more less

Mechanix Wear SpeedKnit CR5 gloves are a cut-resistant, nitrile-coated work glove for trades and DIYers who handle sharp or abrasive materials, supplied here in size Medium. A seamless knit shell wraps the whole hand, and a coated palm keeps a firm hold on tools and materials, so the glove suits everyday jobs where bare hands would be at risk.About the productThe shell is knitted from high-strength HPPE fibres. It is rated to EN 388:2003 Level 5 and ANSI A3 for cut resistance, with cut protection around the full hand. The palm carries a heavy-duty nitrile coating for durable grip, and a reinforced palm and a stretchy back help the glove move with your hand. The gloves are black and grey, unlined and not insulated, so they stay lightweight.Where to use themIndoors: workshop and garage tasks, handling sheet metal offcuts, trimming and cutting jobs, and general material handling.Outdoors: site clean-ups, landscaping prep, and moving rough or abrasive building materials.How to use them Choose the right fit. This listing is size Medium, so check your hand size before ordering. Check the gloves for holes, worn coating or loose threads before each job, and replace them if damaged. Wear them whenever you handle sharp-edged or abrasive materials, and keep them clean for the best grip. They are machine washable. Follow the care label for wash settings and let them dry naturally. Important notesCut resistant does not mean cut proof, so take care around blades and power tools. The gloves are not water resistant, not heat resistant, not insulated and not adjustable, and they do not have knuckle protection. Do not wear them near rotating machinery where a glove could be caught.Specifications Brand Mechanix Wear Product SpeedKnit CR5 Cut-Resistant Gloves Size Medium Pack 1 pair Colour Black and grey Material HPPE knit shell with nitrile palm coating Cut resistance EN 388:2003 Level 5 and ANSI A3 Grip Nonslip nitrile palm Back of hand Stretchable Lined / insulated No Machine washable Yes Care and storageWash according to the care label and air dry away from direct heat. Store the gloves clean and dry, out of direct sunlight, and keep them out of reach of children. Retire the gloves once the shell or coating shows significant wear.

Read more less

The 3M Builders P2 Respirator 8205 is a lightweight disposable particulate respirator for dusty jobs on site and around the home, supplied here as a 20 pack for workshops, crews and busy households. It gives Class P2 rated filtration against dusts, mists, fumes and bushfire smoke, so you can keep a stack on hand and replace it as often as the job needs.About the productThe 8205 is built with 3M advanced electrostatic (electret) filter media, designed to filter effectively while keeping breathing resistance low. A mouldable metal nose piece lets you shape the mask to your nose for a more secure seal, and soft nose foam helps with comfort and with reducing fogging of safety glasses. Dual latex-free straps spread pressure evenly, which is easier on the neck and face over a long shift. It is made without components containing natural rubber latex and meets AS/NZS 1716 for Class P2.Where to use itIndoors: sanding, plastering, tiling, plumbing, insulation work and general dusty renovation tasks.Outdoors: grinding, metal work, wood work and as a smoke filter during bushfire smoke events.How to use it Choose the 8205 for particulate hazards such as sanding dust, plaster dust, grinding dust, mists, fumes and smoke. Hold the respirator over your nose and mouth, then position the straps around your head so it sits snugly. Press the metal nose piece and shape it to the bridge of your nose until the mask seals comfortably. Check the seal before starting work. Facial hair or gaps along the edges can reduce protection. Replace it when it is damaged, soiled, or when breathing becomes noticeably harder. Important notesThis is a particulate respirator only. It is not designed to filter gases or chemical vapours. It is a disposable product, and a good seal against the face is essential for it to work as intended. Always match the respirator to the hazard on your job and follow your workplace requirements and the manufacturer's instructions for use.Specifications Brand 3M Product Builders P2 Respirator 8205 Pack 20 disposable respirators Colour White Filtration class P2 Standard AS/NZS 1716 Filter media 3M advanced electrostatic (electret) media Nose piece Mouldable metal nose piece with nose foam Straps Dual latex-free straps Pack dimensions 130 x 130 x 200 mm Care and storageStore unused respirators in their pack in a clean, dry place away from dust, moisture and extreme heat. Keep out of reach of children. Dispose of used respirators responsibly once they are damaged, dirty or hard to breathe through. Refer to the manufacturer's instructions for full details.

Read more less

Rhino Gloves Black Nitrile Disposable Gloves in size medium are a tough, textured glove for mechanical and industrial jobs, supplied here as a box of 100. Made from 100% nitrile, they give you a puncture-resistant barrier for messy, hands-on work without the need to reach for a heavy reusable glove.About the productThese disposable gloves are made entirely from nitrile, with a textured finish to help with handling tools and parts. They are latex free, ambidextrous (the same glove fits either hand) and naturally oil resistant, and they are designed for tasks where a thin throw-away glove needs to hold up to rough treatment.Where to use themIndoors: workshop and garage tasks, mechanical servicing, general maintenance and industrial work.Outdoors: vehicle and equipment maintenance, site work and other jobs where you want to keep grease and grime off your hands.How to use them Choose the size that gives a snug fit without stretching the glove tight across the palm and fingers. This listing is for size medium. Pull the glove on to either hand, as they are ambidextrous. Dispose of the gloves after use, or sooner if they become torn or heavily contaminated. Important notesThese are single-use gloves and are not intended to be washed and reused. Check your own task and any chemicals you are handling to confirm that nitrile gives the level of protection you need. If you are unsure, check the chemical's Safety Data Sheet (SDS) for glove recommendations.Specifications Brand Rhino Gloves Product Black Nitrile Disposable Gloves Size Medium Pack 100 gloves per box Colour Black Material 100% nitrile Finish Textured Features Puncture resistant, latex free, ambidextrous, oil resistant Use Mechanical and industrial tasks Care and storageStore the box in a cool, dry place away from direct sunlight and heat to help keep the gloves in good condition. Keep out of reach of children. Do not reuse disposable gloves, and discard any that are damaged.

Read more less

Mechanix Wear SpeedKnit S2EC06 gloves in size Large are a thin, high-dexterity cut-resistant work glove for people who need protection without losing feel. A fine 18-gauge knit and a grippy palm coating make them a good fit for handling sharp-edged materials, tools and fiddly parts in the garden, workshop or on site.About the productThe shell is a machine-knit blend of HPPE and steel, which gives cut protection to the ANSI A4 level while staying light and flexible. The palm side carries a water-based urethane coating that is tactile and keeps its grip in both dry and wet conditions. The coating is touchscreen capable, so you can use a phone or tablet without taking the gloves off. Compression cuffs help the glove sit snugly on the wrist, and the construction is silicone free.Where to use itIndoors: workshop and garage jobs, handling sheet metal offcuts, glass-edged items, packaging and trade materials, general assembly and maintenance.Outdoors: gardening and landscaping tasks, handling sharp-edged building materials, fencing and general yard work.How to use it Choose the size that fits snugly with no loose fabric at the fingertips. This listing is for size Large. Pull the compression cuff firmly over the wrist so debris stays out. Use the touchscreen-capable palm and fingertips to operate devices when needed. Check the gloves before each use and replace them if the knit or coating is cut through or badly worn. Important notesCut-resistant gloves reduce the risk of cuts but do not make hands cut-proof. They are not designed for use around moving machinery where a glove could be caught, and they are not a substitute for taking care with blades and sharp edges. Retailers describe this glove with different ANSI cut levels, so rely on the A4 rating shown by the brand when choosing it for a task. Supplied as one pair.Specifications Brand Mechanix Wear Product SpeedKnit S2EC06 Coated-Knit Work Gloves Size Large Pack 1 pair Colour Green Shell 18-gauge HPPE and steel knit Palm coating Water-based urethane Cut resistance ANSI A4 Cuff Compression cuff Touchscreen Touchscreen capable Silicone Silicone free Care Machine washable and dryable Care and storageWash the gloves in the machine when they get dirty and dry them as needed, following the care label on the product. Keep them away from sharp tools and open flame between uses, and store them in a clean, dry spot out of direct sun. Keep out of reach of young children.

Read more less

The 3M Builders P2 Particulate Respirator 8205 is a lightweight, disposable dust mask for sanding, plastering, grinding and other dusty jobs, supplied here as a handy pack of three. It gives P2 rated filtration for everyday workshop, building and renovation tasks, and it is also used as protection against bushfire smoke particles.About the productThe 8205 is an unvalved, cup-style disposable respirator that carries a Class P2 rating under AS/NZS 1716. Its filter layer uses 3M Advanced Electrostatic Media, which is designed to filter effectively while keeping breathing resistance low. The design is light and roomy, which helps wearers keep it on for the whole job. A soft foam pad sits under the aluminium nose clip so the mask is gentler on the skin, and the clip can be bent to the shape of your nose for a snugger seal. That fit can also help reduce fogging on safety glasses. The dual straps are latex-free.Where to use itIndoors: sanding, plastering, tiling, plumbing work, grinding, metalwork, insulation handling and woodworking.Outdoors: dusty site and garden jobs, plus use as protection against bushfire smoke particles.How to use it Wash and dry your hands, then hold the respirator in one hand with the nose clip at your fingertips and the straps hanging free. Cup the mask over your nose and chin, then pull the top strap over the crown of your head and the bottom strap around the back of your neck below your ears. Press the nose clip firmly around the bridge of your nose with both hands until it holds the shape. Check the seal by breathing in and out. If air leaks around the edges, adjust the straps and nose clip and check again. Each pack contains 3 masks. Important notesThis is a particulate respirator, so it is made for dusts, mists, fumes and smoke particles. It is not designed for gases or vapours. Respiratory protection only works when it is correctly selected, fitted and worn for the whole time you are exposed. Facial hair or anything else that gets between the mask edge and your skin can stop a good seal from forming. Replace the respirator if it is damaged, becomes hard to breathe through, or gets dirty or wet. It is a disposable product and is not meant to be cleaned or shared. Always read the user instructions on the pack before use.Specifications Brand 3M Product Particulate Respirator 8205 (Builders P2) Pack 3 respirators Colour White Rating Class P2 Standard AS/NZS 1716 Style Disposable cup-style, unvalved Filter media 3M Advanced Electrostatic Media (polypropylene) Nose clip Adjustable, aluminium, with soft foam pad Straps Dual straps, latex-free Use Indoor and outdoor Care and storageKeep unopened respirators in their pack, in a cool, dry place away from direct sunlight and moisture. 3M gives a shelf life of three years from the date of manufacture when stored between -20°C and +25°C and below 80% relative humidity. Keep out of reach of children. Dispose of used respirators with your normal household or site waste.

Read more less

Mechanix Wear SpeedKnit CR5 gloves in size Small give you a knit, cut-resistant work glove with a grippy nitrile palm, made for handling sharp or abrasive materials without giving up feel. They suit trades, tradies' toolboxes and keen DIYers who deal with sheet metal edges, offcuts, glass handling prep, packaging and general site work.About the productThe shell is knitted from HPPE (high-performance polyethylene) fibres and is described by the manufacturer as 360° cut resistant, so protection wraps around the whole hand rather than only the palm. It carries an EN 388: 2003 cut resistance rating of Level 5 and an ANSI A3 cut rating. The palm and fingers are coated in a heavy-duty nitrile for a durable grip on abrasive items, and there is a stretchy back for a comfortable, close fit.Where to use itIndoors: workshop and garage jobs, handling sharp offcuts, cutting and trimming sheet materials, assembly and general maintenance.Outdoors: site work, landscaping and construction tasks where sharp or rough materials are around.How to use it Check that your hands fit comfortably in the Small size before starting work, as loose gloves reduce grip and control. Wear the gloves on both hands whenever you handle sharp or abrasive items. Inspect the shell and palm coating before each use and replace the gloves if they are cut, worn through or damaged. When they get dirty, machine wash them, following the care label on the glove. Important notesCut resistant does not mean cut proof. Take care around blades and sharp tools, and do not wear these gloves near rotating or moving machinery. These gloves are not insulated, not lined, not heat resistant and not water resistant, so they are not the right choice for hot work or wet conditions. The knuckles are not padded and the cuff has no adjustable strap. The gloves do not contain latex.Specifications Brand Mechanix Wear Product SpeedKnit CR5 Cut Resistant Work Gloves Size Small Pack 1 pair Colour Black and grey Material HPPE knit shell with nitrile coating Cut resistance EN 388: 2003 Level 5, ANSI A3 Grip Nitrile coated palm, non-slip Back of hand Stretchable Length About 305 mm Latex Latex free Care Machine washable Manufacturer part number S2DE-58-007 Care and storageWash when dirty, following the care label, and let the gloves dry fully before storing. Keep them in a clean, dry place away from direct heat, sharp tools and chemicals that could damage the coating. Replace worn or damaged gloves promptly.

Read more less