Bondall

Swing the Bondall Silicone Remover Push Pull Scrape around corner edges to remove silicone joints. Easily access hard to get to glues with this product that is made out of durable, sharper material than other scrape products so it’s built for any project.

Read more less

Betta Tilecare Tile & Grout Sealer waterproofs porous tiles and grout without leaving a slippery film coating, making it perfect for kitchens, bathrooms, and other tiled areas. Drying Time: Recoat: 15 minutes Full Dry: 24 hours Coverage: 1L covers 5-10m² Available Sizes: 1L, 4L, 300g Aerosol, 500ml Wheel Applicator, 750ml Trigger Application Method & Cleanup: Tools: Paint brush, roller, or pump spray Features: Water-based formula Clear penetrating finish Invisible, moisture-repellent coating Easy to use Proven technology Non-slip finish Preparation: Remove any silicone sealant strips and soap build-up. Clean mould off tiles and grout using Betta Tilecare Mould Rid™ or bleach. Rinse thoroughly with water after cleaning. Remove and patch all loose or missing tile grout. For improved results, add Bondall HydroCrete to the grout mix. Ensure the application area is dry for 12-24 hours before applying the sealer. For porous surfaces or after high-pressure washing, allow 3-4 days drying time before sealing. Application: Start from the top of the wall, applying Tile & Grout Sealer liberally over tiles and grout. Finish by applying the sealer to the shower base or floor. Ensure even coverage across all surfaces. Drying: Wait at least 15 minutes for the first application to react before reapplying. After the second application, wait another 15 minutes, then use a dry cloth to remove any excess from the tile surface. Allow 24 hours before using the sealed area. Tips & FAQs: Not for Water Holding Vessels: This product is not intended for waterproofing items like ponds or fish tanks. Test Before Use: Always test on a small, inconspicuous area to ensure it provides the desired result. Avoid Over-application: If the sealer runs or pools, wipe down with a clean, dry, low-lint cloth. Apply Evenly: Take care to apply evenly, especially on pitted surfaces. Pre-treat Stains & Mould: Ensure stains, moss, and mould are treated prior to sealing. Avoid Pooling: Do not allow the product to pool or over-apply on surfaces. Betta Tilecare Tile & Grout Sealer is a reliable and easy-to-use product for waterproofing and protecting your tiles and grout, providing long-lasting protection without altering the natural appearance of your surfaces.

Read more less

Betta Tile Care Tile & Grout Sealer Betta Tilecare Tile & Grout Sealer waterproofs porous tiles and grout without leaving a slippery film coating. Drying Time: Recoat: 15 minutes Full Dry: 24 hours Coverage: 1L covers 5-10m² Finishes: White in the pail, dries clear Ideal For: New & old grout (clean) Unsealed and/or porous tiles Application Method & Cleanup: Tools: Paint brush, roller, pump spray Features: Water-based Clear penetrating finish Invisible moisture-repellent Easy to use Proven technology Non-slip Preparation: Remove silicone sealant strips and soap build-up. Clean mould off tiles and grout using Betta Tilecare Mould Rid™ or bleach. Rinse thoroughly with water after cleaning. Patch any loose or missing tile grout. For improved results, use Bondall HydroCrete as a grout additive. Ensure the application area is dry for 12-24 hours before applying Tile & Grout Sealer. For porous surfaces or after high-pressure washing, allow 3-4 days drying time before applying the sealer. Application: Start at the top of the wall and brush Tile & Grout Sealer liberally over the tiles and grout. Finish with the shower base or floor, ensuring thorough application to all surfaces. Drying: Allow 15 minutes for the first application to react, then reapply over the entire area. After the second application, wait 15 minutes for penetration, then wipe off any excess with a dry cloth. Allow 24 hours for full drying before use. Betta Tilecare Tile & Grout Sealer is the perfect solution for sealing and protecting both new and old grout, ensuring your surfaces stay waterproof and protected without compromising safety.

Read more less

Bondall Betta Tilecare Shower Sealer is a clear, penetrating sealer that helps waterproof unglazed tiles and grout in showers and other wet areas, supplied in a 500ml pack. It soaks into the surface rather than sitting on top, so it protects without leaving a slippery film. It is made in Australia by Bondall and suits DIYers who want a simple, invisible finish.About the formulaA transparent, penetrating sealer based on silane chemistry. It leaves an invisible water-repellent finish with a non-slip feel, and the cured surface resists standard household chemicals. The same product is also sold under the Bondall TileGuard Shower Sealer name.Where to use itIndoors: shower walls and floors, bathroom tiling and grout, and other wet areas where the tiles and grout are unglazed.Outdoors: not specifically promoted by the manufacturer for outdoor use, so check the label before using it outside.Suitable surfaces include most unglazed tiles and grout, such as terracotta, ceramic, marble and slate.How to use itRemove old silicone strips and soap build-up first. Clean off mould using a mould cleaner or bleach, then rinse thoroughly with water. Repair or patch any loose or missing grout. Let the area dry for about 12 to 24 hours before sealing, or 3 to 4 days if the surface is porous or has just been high-pressure washed. Test a small, inconspicuous spot first. Apply with a paint brush, roller or pump spray, working evenly and avoiding pooling or heavy over-application, especially on pitted surfaces. If the product runs, wipe it back with a clean, dry, low-lint cloth. The manufacturer lists a 15 minute recoat time and 24 hours for a full dry.Important notesNot suitable for glazed surfaces. It is not designed to waterproof a water-holding vessel, such as a pot used as a fish pond. Grout should be in sound condition, as the sealer will not cover hairline cracks. It does not fix structural or plumbing defects in a shower, so refer those to the appropriate trade. Treat stains, moss and mould before sealing. Reviewers have reported staining on painted tiles with related Bondall sealers, so always test first.Specifications Brand Bondall Product Betta Tilecare Shower Sealer (also sold as TileGuard Shower Sealer) Pack 500ml Colour Transparent Chemistry Silane Application Paint brush, roller or pump spray Recoat time 15 minutes Full dry 24 hours Coverage 1L covers 5 to 10 m2 Use Unglazed tiles and grout in wet areas Origin Australian made and owned SafetyUse in a well-ventilated area, and wear a suitable respirator if spraying. Wear gloves and eye protection. On skin, wash the area well with running water. For eye contact, flush with running water for several minutes and see a doctor. Refer to the Safety Data Sheet (SDS) for full details.

Read more less

Bondall Ranex Rustbuster Gel is a thick, clingy rust converter and stain remover in a 250ml pack, made for treating rusted steel and iron before priming and painting. Instead of just masking rust, it reacts with it and turns it into a stable iron phosphate layer, so the metal is ready for an oil-based primer. It is an Australian made and owned product from the Ranex range.About the formulaThis is a phosphoric acid based gel. Because it is thick, it stays where you put it and keeps working for longer than a thin liquid would. That extra contact time helps it get into deeper rust. The gel clings to vertical, angled and textured surfaces as well as flat ones. It converts rust into iron phosphate, which forms a protective film that helps resist new rust. The same gel can also be used briefly as a stain remover on tarnished metal and on bore water and tannin stains.Where to use itRust conversion: rusted steel, wrought iron and other ferrous metals that need to be treated and primed before painting.Stain and tarnish removal: stainless steel, chrome, brass and copper, plus bore water and tannin stains. Test on a small hidden spot first.Suitable materials include rusted steel, wrought iron and other ferrous metals, and, for short-contact cleaning, stainless steel, chrome, brass and copper. Avoid Colorbond, painted surfaces, dry concrete, antifouling paint, marble, and anodised, zincalume or galvanised surfaces.How to use itWear gloves and suitable protective clothing, and test on a small, hidden area first.Prepare: Wire brush the rusted area to remove loose scale, oil, grease and old paint. A degreaser before brushing helps with stubborn contamination. You want clean, exposed rust. Mask or cover nearby surfaces that must not be touched by the gel, such as paintwork, Colorbond, marble and galvanised metal, using painter's tape and drop cloths.Rust conversion: Brush or roll the gel onto the rusted areas only. The surface should look dark and wet, and heavy rust needs a thick coat. Wipe any spills on surrounding paint or clean metal off straight away with a damp cloth. Leave the gel in place and do not wipe or wash it off while it works. Most jobs need 1 to 4 hours. Heavily rusted areas may need longer or a second coat, and you should wait 4 hours before re-treating. When the treated area has turned darker, finish with an oil-based primer. If residue is left on the surface, wipe it with a damp cloth and dry it.Stain removal: Brush the gel onto the stain and work it in. Leave it for a few minutes, or up to 15 to 20 minutes for heavier stains. Do not leave it on for long periods when cleaning stains. Wipe it away with a clean dry cloth, then use a damp cloth for any residue. Clean tools and spills with water and detergent.Important notesDo not use zinc-rich or water-based primers over this gel, because they are not compatible. Use it only on rusted areas and keep it off paintwork and non-rusted metal. The gel reacts on contact, so read the full directions before starting. Treated metal should be primed and painted for lasting protection. Coverage depends on the surface and how bad the rust is.Specifications Brand Bondall Product Ranex Rustbuster Gel Rust Converter Size 250ml Base Phosphoric acid solution (gel) Application Paint brush or roller Rust conversion time Typically 1 to 4 hours (allow 4 hours before re-treating) Stain removal contact time A few minutes, up to 15 to 20 minutes for heavy stains Coverage Up to 1 to 2 sqm per 250ml, depending on surface and rust severity Topcoat compatibility Oil-based primer only Clean up Water and detergent Origin Australian made and owned SafetyThis is a phosphoric acid based product and the manufacturer says it reacts on contact, so handle it with care. Wear gloves and other suitable protective clothing, and add eye protection when working with it. Keep it off skin, eyes and sensitive surfaces, and read the safety directions on the pack before use. Store it in its original container, out of reach of children. Always check the manufacturer Safety Data Sheet for hazard classification, first aid and storage details.

Read more less

Bondall Ranex Rustbuster is a fast-working rust treatment that converts rust into a stable iron phosphate layer, here in a handy 250ml bottle for tools, bikes, boats and household jobs. It does double duty as a rust converter before painting and as a cleaner that lifts surface rust, tarnish and bore water stains from polished metal and other non-porous surfaces.About the formulaA clear, phosphoric acid based liquid that penetrates rust and chemically changes the damaging iron oxide into a beneficial phosphate of iron. Because it destroys the rust rather than just covering it, rust-inhibiting paints are not needed over the treated area. It will convert existing rust but does not stop rust returning, so treated metal that is left uncoated can rust again. It is also used to brighten stainless steel, chrome, brass and copper.Where to use itIndoors: baths, basins and toilets, and other non-porous surfaces marked by rust, bore water or mineral stains.Outdoors: bikes, hand tools, boats, fittings and other rusted metal around the yard, workshop or marina.Suitable for rusted steel and iron, stainless steel, chrome, brass and copper, plus non-porous surfaces with rust or bore water stains (spot test first on anything you are unsure about, including tinted gelcoat).How to use itAlways wear gloves, protective clothing and eye protection.Rust conversion: remove oil, grease, paint and loose scale first. Apply Ranex to the rusted areas only, by brush, roller, rag or dipping, and let it dry without wiping it off so it can work into the rust. Drying takes anywhere from 1 to 24 hours depending on the application and conditions. Wipe any excess off surrounding metal or paintwork with a damp cloth straight away. Deep-seated rust may need a second coat after 24 hours. Once completely dry, topcoat with an oil-based primer and paint. Zinc-rich paints are not recommended.Surface rust and tarnish: apply with a damp cloth, sponge or fine steel wool, then wipe off promptly and polish with a dry cloth. Small rusty parts can be soaked for a few minutes and checked until clean, then wiped or washed off.Stains: work it into the stain, then wipe off. Do not leave it sitting on the surface.Clean up tools and drips with detergent and water.Important notesNot suitable for vehicle paintwork, Colorbond, dry concrete, anti-fouling paint, marble, or anodised, Zincalume and galvanised surfaces. The product reacts chemically on contact, so read the label directions before starting. Ranex converts rust but does not prevent it from forming again, so prime and paint the treated surface for lasting protection.Specifications Brand Bondall Product Ranex Rustbuster Rust Converter Size 250ml bottle Colour Clear liquid Base Phosphoric acid Application Brush, roller, rag or dipping Drying time 1 to 24 hours, depending on application Coverage Up to 20m2 per litre, depending on the surface Primer Oil-based primer recommended before painting Clean up Detergent and water Use Interior and exterior SafetyCorrosive. Wear protective gloves, protective clothing and eye or face protection, avoid breathing mist or vapour, wash skin thoroughly after handling, and do not eat, drink or smoke while using. For eye contact, rinse with water for at least 15 minutes and get medical help. Keep in the original container with the lid closed, and keep away from strong bases, oxidising agents and metals, as contact with common metals can release flammable hydrogen. Refer to the Safety Data Sheet (SDS) for full details.

Read more less

Betta Tilecare Stone & Concrete Sealer from Bondall is a water-based, clear sealer that soaks into stone and concrete and also builds a protective film on top, supplied here in a 1L pail. It is designed to bind and protect the surface, repel moisture and help guard against stains and soiling, while keeping the natural look of the material.About the formulaA water-based, low odour, low VOC sealer with a combined penetrating and film-forming action. It dries to a clear natural finish, so it enhances the surface rather than hiding it. The film helps resist staining and soiling and reduces salt and hard water build-up. It can be used on both horizontal and vertical masonry surfaces, and recoating can follow straight away.Where to use itIndoors: interior flooring, kitchen, laundry and bathroom areas with stone, concrete, ceramic or porcelain surfaces.Outdoors: access areas and walkways, alfresco areas and balconies.Suitable materials include stone, slate, granite, concrete, ceramic and porcelain. Always test a small, inconspicuous area first to check the result on your particular surface.How to use itStart with a clean, dry surface that is free of dirt, grease, oil and other contaminants, and fix any stains or mould growth before sealing. Apply evenly to the surface and avoid pooling or over-application. Because the sealer can be recoated immediately, you can complete additional coats in the same session. Follow the directions on the pack for the number of coats, application tools and clean-up.Important notesAllow about 24 hours to dry before use. Drying and cure times vary with temperature, humidity and how porous the surface is. Sealed surfaces can behave differently under foot, so check grip on smooth or dense surfaces before putting a sealed floor into service. Sold for residential use. Check the pack directions for any surfaces the manufacturer lists as unsuitable.Specifications Brand Bondall Product Betta Tilecare Stone & Concrete Sealer Size 1L pail Finish Clear natural Base Water-based Action Penetrating and film forming Dry time 24 hours Recoat Immediate Suitable surfaces Stone, slate, granite, concrete, ceramic, porcelain Use Interior and exterior, residential SafetyIt is water-based with low odour and low VOCs, but it should still be handled with care. Keep it out of reach of children, use it in a well-ventilated area, and avoid contact with skin and eyes. If it gets on skin or in eyes, rinse well with plenty of water. Refer to the Safety Data Sheet (SDS) for full details.

Read more less

Bondall BondCrete is an Australian made bonding and sealing agent that has been a building and renovating staple since 1951, supplied here in a 1L pack. One product covers several jobs: a woodworking and craft adhesive straight from the container, a primer and sealer when diluted, and a bonding additive for cement, sand and render mixes.About the formulaA concentrated, high solids, water-based polymer product that contains a resin additive for strong bonding. It is white in the container and dries clear with no gloss. Because it is so concentrated, it can be diluted with water for most jobs, which stretches a single litre a long way. Bondall says there is seldom any need to hack, chip or acid etch most surfaces before bonding.Where to use itIndoors: tile bedding and fixing, bonding render or toppings to prepared surfaces, sealing and dustproofing concrete floors in covered areas, priming porous walls before water-based paint, and woodworking and general craft projects.Outdoors: Bondall directs that exterior sealing needs its separate paving and concrete sealer, and BondCrete is not intended to be exposed to water, moisture or dampness. Treat this product as an interior or covered-area product.Suitable materials include concrete, brick and other masonry, plaster, stone, tiles and timber, along with other porous surfaces.How to use itStart with a surface free of dirt, dust, oil, grease and loose or flaking material. Stir well before use. Dilution ratios from the manufacturer (BondCrete to water): Sealer coat: 1 part BondCrete to 4 parts water Bondcoat for bedding, render or topping: 1 part to 1 part water. Apply the bedding while the coat is still wet or tacky. Admix for cement, sand and render: 1 part BondCrete to 10 parts water, used in place of mixing water. As a guide, 1L makes enough admix for about 20kg of cement. Woodworking adhesive: use neat, applied to one surface only. Press the pieces together and clamp lightly. Allow a sealer coat to dry for about 24 hours before painting with a water-based or acrylic paint.Important notesUsed neat, it sets in about 30 minutes and reaches maximum strength after 24 hours. Cement mixes made with BondCrete still follow normal curing, with full cure at around 4 weeks. It is not suitable for bonding plastic, rubber, glass or other non-porous materials. It is not suitable for permanently wet areas. Do not seal a floor with it if you plan to use an oil-based paving paint or similar floor coating. Drying times vary with the application and temperature, so allow at least 24 hours between coats. Protect it from freezing and from extremes of temperature and direct sunlight.Specifications Brand Bondall Product BondCrete Bonding & Sealing Agent (Cement Additive) Pack 1L Colour White in the container, dries clear Base Water-based vinyl acetate polymer mix Application Neat from the container, diluted as a sealer or bondcoat, or mixed into cement as an admix Set time (neat) About 30 minutes Maximum strength (neat) About 24 hours Coverage (older manufacturer datasheet) About 3.5 m² per litre undiluted, up to about 35 m² per litre at 1:4 dilution Use Interior and covered areas Origin Made in Australia SafetySwallowing it may irritate the stomach and cause nausea and vomiting. Vapours or mists may irritate the nose, throat and airways. Skin contact may cause redness or itching. Use with good ventilation, and wear gloves and eye protection as a sensible precaution. Refer to the Safety Data Sheet (SDS) for full details.

Read more less

Bondall Betta Tilecare Wet Area Waterproofer is a fast-curing, water-based liquid rubber membrane for sealing wet areas beneath tiles and renders, supplied here in a 10L pail for bigger bathroom, laundry and balcony jobs. It dries to a flexible, elastic film that acts as a water and vapour barrier, and it is designed to cope with permanently wet conditions, including ponding water once cured.About the formulaA water-based, one-part elastomeric membrane that is described by the manufacturer as non-toxic and non-flammable. It is classed as a Class III membrane under AS/NZS 4858 and, when used with the Betta detailing range, is designed to meet the Australian wet area requirements including AS 3740. The fast-curing formulation lets you tile or render over it quickly, and it is compatible with a range of tile adhesives, renders and toppings. No primer is needed on plasterboard or sound, dry concrete.Where to use itIndoors: bathroom and laundry floors and walls, shower recesses and other tiled wet areas, plus under screeds and toppings.Outdoors: balconies, decks, podiums and terrace floors, planters and retaining walls, and roofs that will be covered with screeds or toppings.Suitable substrates include concrete, screeds, renders, brick, plasterboard, fibre cement sheet and marine plywood. It sits under ceramic, porcelain, granite, marble and other stone tile finishes. Other surfaces, such as smooth, dense or damp ones, may need a Betta primer first, so check the technical data sheet for your substrate.How to use itMake sure the surface is sound, stable, clean and free of dust, oil, grease and loose material. Install the bond breaker and elastic joint band detailing first, as this is part of meeting AS 3740. Apply by brush, roller or spray unit in a minimum of two coats, changing direction between coats, to a total minimum coverage of 1.5 litres per square metre. This builds a dried film of roughly 1.2mm. Vertical or pitched areas can be done at around 1 litre per square metre. Take the membrane up walls at least 150mm in general wet areas and to 1.8m in shower recesses, finishing with a continuous, seamless film. Clean tools with water straight after use.Important notesTypical drying times at normal conditions (about 20°C, 50% humidity): tack free in about 45 minutes, recoat in about 1 hour, and ready to tile or topping over in about 4 hours. Retailer information quotes 6 hours before tiling, so allow the longer time in cool or humid weather and always follow the pack. Allow ample cure time before flood testing, as Bondall publishes more than one figure for this. Finish toppings must be water-based and solvent-free. Areas with rising damp or negative pressure should first be treated with Betta Damp Stop. Use on concrete slabs with hydrostatic or vapour pressure from below is outside the scope of the independent appraisal. Do not apply when rain is imminent. Always check the technical data sheet for your project.Specifications Brand Bondall (Betta Tilecare) Product Wet Area Waterproofer Pack 10L pail Base Water-based liquid rubber (elastomeric) Application Brush, roller or spray unit Coverage Minimum 1.5L per m2 over two coats (about 6.6 m2 per 10L pail) Dried film thickness Approx. 1.2mm Tack free About 45 minutes Recoat About 1 hour Tile or topping over About 4 to 6 hours (see notes) Standard AS/NZS 4858 Class III membrane Clean up Water Use Residential and commercial wet areas, interior and covered exterior SafetyEven so, wear gloves and eye protection, ensure good ventilation, and avoid contact with skin and eyes. Keep out of reach of children. Store in a sealed container in a cool place and protect from frost. Refer to the Safety Data Sheet (SDS) for full details.

Read more less

Betta Tilecare Wet Area Waterproofer is a flexible, fast-drying, liquid rubber membrane designed for waterproofing internal wet areas such as bathrooms, showers, laundries, and tiled spaces. It provides a durable, seamless moisture barrier that resists water pressure and prevents leaks when applied beneath tiles, screeds, or surface coatings. Surface Preparation: All surfaces must be clean, dry, and structurally sound. Remove dust, oil, grease, wax, and loose or flaking material. Smooth, glossy surfaces should be roughened or etched. Rough or uneven surfaces should be patched and leveled. Mechanically remove any surface contamination or de-bonded coatings for optimal adhesion. Priming (if required): Use a compatible primer on highly porous, glossy, or damp surfaces to promote adhesion. Ensure primed surfaces are dry before applying the membrane. Application Instructions: Apply a bond breaker system such as joint tape or fabric to corners, joints, and penetrations. Apply the first coat using a brush or roller, working it into the surface to avoid pinholes. Allow the first coat to dry (approx. 1 hour), then apply the second coat in the opposite direction. Total coverage should be at least 1.5L/m², forming a final dried film thickness of approximately 1.2mm. Coverage should extend up walls at least 150mm in general areas and 1800mm in shower recesses. Allow the membrane to cure fully before tiling or overcoating. Coverage: Approximately 1.5L per square metre for two coats, depending on surface porosity. Drying Time: Tack-free: 45 minutes Recoat: 1 hour Ready for tiling: 4 hours Flood test ready: 16 hours Dry times may vary based on temperature and humidity. Clean Up: Clean tools and equipment with water immediately after use. Technical Data: Base: Water-based liquid rubber Colour: Grey Finish: Flexible, seamless membrane Dried Film Thickness: Approx. 1.2mm (after two coats) Application Temp: 5°C to 35°C Shelf Life: Refer to packaging for details

Read more less

Betta TileCare Tile & Grout Sealer with Wheel Applicator is a premium, water-based penetrating sealer that forms an invisible moisture-repellent barrier. Ideal for use in bathrooms, kitchens, laundries, and other wet areas, it helps prevent water damage, stains, and mould growth on porous tiles and grout. The included wheel applicator makes sealing fast and easy, delivering smooth and precise coverage with minimal mess. Once cured, it dries clear without leaving a slippery or glossy finish, maintaining the natural look of your surfaces. Surface Preparation Ensure surfaces are clean, dry, and free of mould, soap scum, and any existing sealers or coatings. Remove silicone sealants prior to application. For best results, allow grout and tiles to dry for at least 24 hours before sealing. Heavily porous surfaces may require 3–4 days of drying time. Application Instructions Shake well before use. Starting from the top of the area, apply sealer evenly using the wheel applicator. Ensure all tile and grout lines are thoroughly coated. Allow to absorb for 15 minutes. Reapply a second coat if needed. Wipe away any excess product from tiles with a clean, dry cloth. Avoid heavy foot traffic or moisture exposure for at least 24 hours after final coat. Coverage Approx. 5–10m² per litre depending on tile and grout porosity. Drying Time Touch dry in 15 minutes Fully cured in 24 hours Clean-Up Clean tools and applicator with water immediately after use. Technical Data Appearance: Milky white (dries clear) Base: Water-based penetrating sealer Finish: Invisible, non-slip Application method: Wheel applicator Suitable for: Porous tiles and grout (indoor use)  

Read more less

Betta TileCare Tile & Grout Cleaner is a powerful, ready-to-use solution designed to effectively remove ingrained dirt, grease, grime, and oil deposits from tiled surfaces without causing damage. Its fast-acting, biodegradable, and non-caustic formula makes it both user-friendly and environmentally responsible.​ Surface Preparation: Ensure the surface is free from dust and loose materials before cleaning.​ Application Instructions: Spray Betta TileCare Tile & Grout Cleaner directly onto the affected area.​ Vigorously scrub the area with a stiff brush to lift dirt and grime.​ For heavily soiled surfaces, repeat the application as necessary until the stain is removed.​ Coverage: Approximately 3 to 4 square meters per liter.​ Drying Time: Allow the cleaned area to dry completely before use.​ Cleanup: After scrubbing, leave the solution on the surface for 5 to 10 minutes, then rinse thoroughly with water. Do not allow the cleaner to fully dry before rinsing.​ Technical Data: Appearance: Clear liquid​ pH Level: Neutral​ Solubility: Fully water-soluble​

Read more less