Out Of Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Can I use Command™ Products on glass windows?
It is okay to use Command™ Products if the glass is not exposed to direct sunlight and not flooded with water. For glass shower doors use our special Water-Resistant line of products (blue strip) which are clearly marked on our packaging.
Will Command™ Products stick to brick?
No. Command™ Products are intended for mostly smooth surfaces such as those listed above. However, our products will stick to painted, smooth cinder block (the type found inside many school and office buildings).
Can I use Command™ Products on fresh paint?
Paint should be fully cured (check paint can for manufacturer's cure time) before using Command Products. We recommend waiting 28 days before use on fresh paint. Also, alcohol may remove or dull the surface of fresh paint.
Can I use Command™ Products on wallpaper?
No. Most wallpapers are too delicate and can tear when adhesives are applied.
Will it hold soundproofing acoustic foam board or decorative plates?
Yes, provided the item is within the weight limit specified for Command™ Picture Hanging Strips. We do not recommend hanging tapestry or other fabrics. For decorative plates, please ensure there is a smooth surface for the strip to adhere to. Do not hang valuable or irreplaceable items.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Can I use Command™ Products on glass windows?
It is okay to use Command™ Products if the glass is not exposed to direct sunlight and not flooded with water. For glass shower doors use our special Water-Resistant line of products (blue strip) which are clearly marked on our packaging.
Will Command™ Products stick to brick?
No. Command™ Products are intended for mostly smooth surfaces such as those listed above. However, our products will stick to painted, smooth cinder block (the type found inside many school and office buildings).
Can I use Command™ Products on fresh paint?
Paint should be fully cured (check paint can for manufacturer's cure time) before using Command Products. We recommend waiting 28 days before use on fresh paint. Also, alcohol may remove or dull the surface of fresh paint.
Can I use Command™ Products on wallpaper?
No. Most wallpapers are too delicate and can tear when adhesives are applied.
Will it hold soundproofing acoustic foam board or decorative plates?
Yes, provided the item is within the weight limit specified for Command™ Picture Hanging Strips. We do not recommend hanging tapestry or other fabrics. For decorative plates, please ensure there is a smooth surface for the strip to adhere to. Do not hang valuable or irreplaceable items.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Can I use Command™ Products on glass windows?
It is okay to use Command™ Products if the glass is not exposed to direct sunlight and not flooded with water. For glass shower doors use our special Water-Resistant line of products (blue strip) which are clearly marked on our packaging.
Will Command™ Products stick to brick?
No. Command™ Products are intended for mostly smooth surfaces such as those listed above. However, our products will stick to painted, smooth cinder block (the type found inside many school and office buildings).
Can I use Command™ Products on fresh paint?
Paint should be fully cured (check paint can for manufacturer's cure time) before using Command Products. We recommend waiting 28 days before use on fresh paint. Also, alcohol may remove or dull the surface of fresh paint.
Can I use Command™ Products on wallpaper?
No. Most wallpapers are too delicate and can tear when adhesives are applied.
Will it hold soundproofing acoustic foam board or decorative plates?
Yes, provided the item is within the weight limit specified for Command™ Picture Hanging Strips. We do not recommend hanging tapestry or other fabrics. For decorative plates, please ensure there is a smooth surface for the strip to adhere to. Do not hang valuable or irreplaceable items.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Can I use Command™ Products on glass windows?
It is okay to use Command™ Products if the glass is not exposed to direct sunlight and not flooded with water. For glass shower doors use our special Water-Resistant line of products (blue strip) which are clearly marked on our packaging.
Will Command™ Products stick to brick?
No. Command™ Products are intended for mostly smooth surfaces such as those listed above. However, our products will stick to painted, smooth cinder block (the type found inside many school and office buildings).
Can I use Command™ Products on fresh paint?
Paint should be fully cured (check paint can for manufacturer's cure time) before using Command Products. We recommend waiting 28 days before use on fresh paint. Also, alcohol may remove or dull the surface of fresh paint.
Can I use Command™ Products on wallpaper?
No. Most wallpapers are too delicate and can tear when adhesives are applied.
Will it hold soundproofing acoustic foam board or decorative plates?
Yes, provided the item is within the weight limit specified for Command™ Picture Hanging Strips. We do not recommend hanging tapestry or other fabrics. For decorative plates, please ensure there is a smooth surface for the strip to adhere to. Do not hang valuable or irreplaceable items.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Can I use Command™ Products on glass windows?
It is okay to use Command™ Products if the glass is not exposed to direct sunlight and not flooded with water. For glass shower doors use our special Water-Resistant line of products (blue strip) which are clearly marked on our packaging.
Will Command™ Products stick to brick?
No. Command™ Products are intended for mostly smooth surfaces such as those listed above. However, our products will stick to painted, smooth cinder block (the type found inside many school and office buildings).
Can I use Command™ Products on fresh paint?
Paint should be fully cured (check paint can for manufacturer's cure time) before using Command Products. We recommend waiting 28 days before use on fresh paint. Also, alcohol may remove or dull the surface of fresh paint.
Can I use Command™ Products on wallpaper?
No. Most wallpapers are too delicate and can tear when adhesives are applied.
Will it hold soundproofing acoustic foam board or decorative plates?
Yes, provided the item is within the weight limit specified for Command™ Picture Hanging Strips. We do not recommend hanging tapestry or other fabrics. For decorative plates, please ensure there is a smooth surface for the strip to adhere to. Do not hang valuable or irreplaceable items.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Can I use Command™ Products on glass windows?
It is okay to use Command™ Products if the glass is not exposed to direct sunlight and not flooded with water. For glass shower doors use our special Water-Resistant line of products (blue strip) which are clearly marked on our packaging.
Will Command™ Products stick to brick?
No. Command™ Products are intended for mostly smooth surfaces such as those listed above. However, our products will stick to painted, smooth cinder block (the type found inside many school and office buildings).
Can I use Command™ Products on fresh paint?
Paint should be fully cured (check paint can for manufacturer's cure time) before using Command Products. We recommend waiting 28 days before use on fresh paint. Also, alcohol may remove or dull the surface of fresh paint.
Can I use Command™ Products on wallpaper?
No. Most wallpapers are too delicate and can tear when adhesives are applied.
Will it hold soundproofing acoustic foam board or decorative plates?
Yes, provided the item is within the weight limit specified for Command™ Picture Hanging Strips. We do not recommend hanging tapestry or other fabrics. For decorative plates, please ensure there is a smooth surface for the strip to adhere to. Do not hang valuable or irreplaceable items.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Can I use Command™ Products on glass windows?
It is okay to use Command™ Products if the glass is not exposed to direct sunlight and not flooded with water. For glass shower doors use our special Water-Resistant line of products (blue strip) which are clearly marked on our packaging.
Will Command™ Products stick to brick?
No. Command™ Products are intended for mostly smooth surfaces such as those listed above. However, our products will stick to painted, smooth cinder block (the type found inside many school and office buildings).
Can I use Command™ Products on fresh paint?
Paint should be fully cured (check paint can for manufacturer's cure time) before using Command Products. We recommend waiting 28 days before use on fresh paint. Also, alcohol may remove or dull the surface of fresh paint.
Can I use Command™ Products on wallpaper?
No. Most wallpapers are too delicate and can tear when adhesives are applied.
Will it hold soundproofing acoustic foam board or decorative plates?
Yes, provided the item is within the weight limit specified for Command™ Picture Hanging Strips. We do not recommend hanging tapestry or other fabrics. For decorative plates, please ensure there is a smooth surface for the strip to adhere to. Do not hang valuable or irreplaceable items.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Can I use Command™ Products on glass windows?
It is okay to use Command™ Products if the glass is not exposed to direct sunlight and not flooded with water. For glass shower doors use our special Water-Resistant line of products (blue strip) which are clearly marked on our packaging.
Will Command™ Products stick to brick?
No. Command™ Products are intended for mostly smooth surfaces such as those listed above. However, our products will stick to painted, smooth cinder block (the type found inside many school and office buildings).
Can I use Command™ Products on fresh paint?
Paint should be fully cured (check paint can for manufacturer's cure time) before using Command Products. We recommend waiting 28 days before use on fresh paint. Also, alcohol may remove or dull the surface of fresh paint.
Can I use Command™ Products on wallpaper?
No. Most wallpapers are too delicate and can tear when adhesives are applied.
Will it hold soundproofing acoustic foam board or decorative plates?
Yes, provided the item is within the weight limit specified for Command™ Picture Hanging Strips. We do not recommend hanging tapestry or other fabrics. For decorative plates, please ensure there is a smooth surface for the strip to adhere to. Do not hang valuable or irreplaceable items.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Can I use Command™ Products on glass windows?
It is okay to use Command™ Products if the glass is not exposed to direct sunlight and not flooded with water. For glass shower doors use our special Water-Resistant line of products (blue strip) which are clearly marked on our packaging.
Will Command™ Products stick to brick?
No. Command™ Products are intended for mostly smooth surfaces such as those listed above. However, our products will stick to painted, smooth cinder block (the type found inside many school and office buildings).
Can I use Command™ Products on fresh paint?
Paint should be fully cured (check paint can for manufacturer's cure time) before using Command Products. We recommend waiting 28 days before use on fresh paint. Also, alcohol may remove or dull the surface of fresh paint.
Can I use Command™ Products on wallpaper?
No. Most wallpapers are too delicate and can tear when adhesives are applied.
Will it hold soundproofing acoustic foam board or decorative plates?
Yes, provided the item is within the weight limit specified for Command™ Picture Hanging Strips. We do not recommend hanging tapestry or other fabrics. For decorative plates, please ensure there is a smooth surface for the strip to adhere to. Do not hang valuable or irreplaceable items.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Can I use Command™ Products on glass windows?
It is okay to use Command™ Products if the glass is not exposed to direct sunlight and not flooded with water. For glass shower doors use our special Water-Resistant line of products (blue strip) which are clearly marked on our packaging.
Will Command™ Products stick to brick?
No. Command™ Products are intended for mostly smooth surfaces such as those listed above. However, our products will stick to painted, smooth cinder block (the type found inside many school and office buildings).
Can I use Command™ Products on fresh paint?
Paint should be fully cured (check paint can for manufacturer's cure time) before using Command Products. We recommend waiting 28 days before use on fresh paint. Also, alcohol may remove or dull the surface of fresh paint.
Can I use Command™ Products on wallpaper?
No. Most wallpapers are too delicate and can tear when adhesives are applied.
Will it hold soundproofing acoustic foam board or decorative plates?
Yes, provided the item is within the weight limit specified for Command™ Picture Hanging Strips. We do not recommend hanging tapestry or other fabrics. For decorative plates, please ensure there is a smooth surface for the strip to adhere to. Do not hang valuable or irreplaceable items.
Out Of Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Can I use Command™ Products on glass windows?
It is okay to use Command™ Products if the glass is not exposed to direct sunlight and not flooded with water. For glass shower doors use our special Water-Resistant line of products (blue strip) which are clearly marked on our packaging.
Will Command™ Products stick to brick?
No. Command™ Products are intended for mostly smooth surfaces such as those listed above. However, our products will stick to painted, smooth cinder block (the type found inside many school and office buildings).
Can I use Command™ Products on fresh paint?
Paint should be fully cured (check paint can for manufacturer's cure time) before using Command Products. We recommend waiting 28 days before use on fresh paint. Also, alcohol may remove or dull the surface of fresh paint.
Can I use Command™ Products on wallpaper?
No. Most wallpapers are too delicate and can tear when adhesives are applied.
Will it hold soundproofing acoustic foam board or decorative plates?
Yes, provided the item is within the weight limit specified for Command™ Picture Hanging Strips. We do not recommend hanging tapestry or other fabrics. For decorative plates, please ensure there is a smooth surface for the strip to adhere to. Do not hang valuable or irreplaceable items.
Out Of Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Concremate Expanding Anchoring Cement
Anchor, patch and lock in place with confidence. Concremate is a high-performance expanding cement designed for rapid, reliable anchoring and structural patching. Mixed to a workable, mortar-like consistency, it expands slightly as it cures to counteract drying shrinkage. That controlled expansion grips embedded items and surrounding material tightly, delivering a secure, long-lasting hold that stands up to strain, stress and vibration.
Why choose Concremate
Fast turnaround: initial set in about 30 minutes and hard in approximately 1 hour, so many jobs can progress the same day.
Expands and grips: engineered expansion of about 0.125% offsets shrinkage and locks into the substrate.
High ultimate strength: cures to a finish that becomes harder than standard concrete at 28 days when properly mixed and applied.
Versatile application: ideal for anchoring bolts, rails, brackets and fixtures, as well as patching holes, chases and cracks.
Durable performance: forms a robust, long-term bond that resists severe mechanical stress and vibration.
Where it excels
Use Concremate for secure embedment and structural repairs on common mineral surfaces. It is suitable for:
Concrete and masonry
Brickwork and stone
Tiles and terrazzo
Plaster and similar mineral substrates
Typical projects
Anchoring handrails, posts, machine base bolts, threaded rods and heavy brackets
Fixing door and window hardware to masonry openings
High-pressure grouting under plates, around pipe sleeves and service penetrations
Patching voids, chased conduits, spalled edges and impact damage in floors, walls and ceilings
How it works
Concremate is a mineral-based expanding cement. After mixing with clean water, the paste hydrates and begins to set. A small, controlled expansion during cure offsets natural drying shrinkage. The result is a tight, interference-style fit that increases grip on embedded items and keys the patch into surrounding material. For best results, the material must be able to expand slightly while drying and should not be constrained in a completely sealed cavity.
Directions for use
Surface preparation: Remove dust, loose material, laitance, oil and contaminants. Roughen smooth surfaces and blow or brush clean. Pre-dampen porous substrates to a surface-saturated dry condition; do not leave standing water.
Mixing: Add powder to clean water while stirring until a smooth, lump-free, mortar-like consistency is reached. Mix only what you can place within the working time. Do not over-water.
Placement for anchoring: Fill the prepared hole or pocket from the bottom up to avoid entrapped air. Insert the fixture or fastener while the mix is workable and align immediately. Hold steady until initial set.
Placement for patching: Tightly pack the mix into the void in layers, compacting each layer to ensure full contact. Strike off and finish the surface as required.
Curing: Protect from rapid drying, wind and direct sun during early cure. Avoid vibration or load until the material has hardened.
Cleanup: Clean tools and splashes with water while product is fresh. Once hardened, mechanical removal may be required.
Good practice tips
Plan the job so placement occurs immediately after mixing for best expansion and bond.
For deep holes or large voids, place in lifts and compact each lift.
Do not confine completely in a sealed cavity; allow space for controlled expansion.
Avoid adding sand, cement or other admixtures that can change performance.
Performance and durability
When correctly mixed and applied, Concremate develops a hard, dense matrix with strong adhesion to mineral substrates and embedded metals. The slight expansion on cure reduces micro-gapping at the interface, improving load transfer and long-term durability. After full cure at 28 days, the set material achieves hardness that exceeds standard concrete, supporting demanding anchoring and patching tasks.
Safety and handling
Wear suitable gloves, eye protection and a dust mask when mixing and placing.
Avoid contact with skin and eyes. In case of contact, rinse with plenty of water.
Store in a cool, dry place in the original, tightly closed container.
Keep out of reach of children and pets.
Specifications
Product type
Expanding cement anchoring and patching compound
Form
Premixed dry powder
Color
Grey
Mix consistency
Mortar-like paste when mixed with clean water
Initial set
About 30 minutes (conditions dependent)
Hard set
Approximately 1 hour (conditions dependent)
Ultimate hardness
Harder than standard concrete at 28 days
Expansion
Approx. 0.125% during cure
Recommended substrates
Concrete, brick, stone, tiles, plaster, terrazzo
Primary uses
Anchoring bolts, rails, brackets and fixtures; patching holes, chases and cracks; high-pressure grouting
Cleanup
Water while fresh
Storage
Cool, dry conditions in sealed container
What to expect on the job
With suitable surface preparation and correct mixing, you can expect a smooth placement, quick set and a dense, high-integrity bond. The expansion action helps lock hardware and patches into place. Protect new work from early movement and moisture loss, then return to service once the hard set has been achieved and the repair or anchorage has reached the necessary strength for your application.
Limitations
Not for use where the mix cannot expand slightly during cure.
Do not apply over active movement joints or flexible substrates.
Working and set times vary with temperature, humidity and mix ratio.
Note: Always trial on a small, inconspicuous area or non-critical hole to confirm suitability for your specific substrate and conditions.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Accurate measurements up to 0.02mm
Outside, Inside and Depth measurement scale
Metric
The Craftright 150mm vernier caliper is perfect for your next precision measuring job, made from Carbon steel and measuring from 0 to 150mm.
Precise metric measurements as low as 0.02mm can be obtained using the main scale for full numbers in combination with the vernier scale for accurate measurements between 0 to 1mm.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Concentrated grout additive designed to increase the flexibility, strength and water resistance of cement based grouts.
Davco® 4 in 1 Grout Additive is suitable for interior and exterior domestic applications. Ideal for submerged and high foot traffic areas, where a high degree of deformability is required.
Increases flexibility, strength and water resistance of cement based grout
Enhances the colour of grout
Reduced likelihood of efflorescence
Usage
To reduce the porosity of cement based grouts
To improve the compressive strength of cement based grouts
To improve the flexural strength of cement-based grouts
Suitable for use when grouting over fibre cement sheet floors and swimming pools or where a greater performance level / heavy duty performance is required
Advantages
Increases flexibility, strength and water resistance of cement based grout
Enhances the colour of grout
Reduced likelihood of efflorescence
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Davco Grey One Pot Premixed Tile Adhesive is a high-performance, ready-to-use acrylic-based adhesive, perfect for interior wall and floor tiling. Its premixed formula eliminates the need for onsite preparation, providing excellent adhesion and ease of application for both professionals and DIYers.
Surface Preparation: Ensure all surfaces are sound, dry, and free from dust, oil, grease, or any other contaminants. Painted or glossy surfaces should be roughened and cleaned. For porous surfaces, priming may be required to ensure maximum adhesion.
Application Instructions:
Stir the adhesive thoroughly before use.
Using a notched trowel, apply the adhesive to the substrate. Only spread as much adhesive as can be tiled within 20 minutes.
Firmly press tiles into the adhesive, ensuring full coverage on the tile back.
Adjust tiles within 20 minutes of placing them.
Allow adhesive to set for 24 hours before grouting.
Coverage: Approximately 0.75–1.25 m² per litre using a 6mm notched trowel. Coverage may vary depending on substrate and trowel size.
Drying Time: Allow 24 hours before grouting. Full cure achieved within 7 days under normal conditions.
Clean Up: Clean tools and excess adhesive with water immediately after use. Once dried, adhesive is more difficult to remove.
Technical Data:
Appearance: Grey paste
Base: Acrylic
Open Time: 20 minutes
Adjustment Time: 20 minutes
Application Temperature: 5°C to 35°C
Ready for Grouting: After 24 hours
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Davco PrimeX Multipurpose Acrylic Primer 5L is a professional-grade, water-based primer specially formulated to improve the adhesion of tile adhesives and waterproofing membranes to porous surfaces. Ideal for interior and exterior walls and floors in domestic and commercial applications, this primer ensures strong bonding performance while reducing porosity and dusting of substrates.
Surface Preparation:
Surfaces must be clean, dry, and free from dust, oil, grease, wax, paint, curing compounds, and other contaminants. Remove any laitance, loose materials, or previous coatings that may interfere with adhesion. On hot or windy days, dampen porous substrates lightly to avoid flash drying—but do not leave standing water.
Application Instructions:
Stir the primer thoroughly before use. Apply evenly using a roller, brush, broom, or squeegee in a thin, consistent layer. Allow the primer to dry fully before proceeding—drying is complete when the white, milky appearance turns clear.
Coverage:
Approximately 6–10m² per litre, depending on surface porosity.
Drying Time:
Typically dries within 30–60 minutes under standard conditions. Cooler temperatures or high humidity may extend drying time.
Clean Up:
Clean tools and equipment with water immediately after use. Do not allow the product to dry on tools.
Technical Data:
Type: Acrylic-based
Colour: Milky white (dries clear)
Suitable for: Cement render, concrete, fibre cement sheets
VOC Content: Low
Packaging: 5 Litre plastic container
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Davco® Sanitized Glue Grout
A Pre-mixed, Ready-to-Use Wall Tile Adhesive and Grout
Davco® Sanitized Glue Grout is a flexible, white, pre-mixed adhesive and grout for internal wall tile applications. Ideal for thin bed fixing of porous-backed ceramic tiles, it’s suitable for domestic areas like bathrooms, kitchens, and laundries.
Key Features:
White appearance
Pre-mixed and ready for immediate use
Dual-purpose: serves as both adhesive and grout
Ideal for fixing lifted or popped tiles
No wastage
Usage:
Surfaces:
Cement renders
Rendered brickwork and blockwork
Plasterboard
Fibre-cement wall sheets
Tiles:
Suitable for thin-bed fixing of most porous-backed ceramic tiles
Areas:
Interior applications, including domestic walls, bathrooms, kitchens, and laundries
Advantages:
Ready to use, no mixing required
Suitable for adhesive and grout in one product
Convenient for quick repairs or installations
No product wastage
Packaging & Colour:
Packaging: 500g pail
Colour: White paste
Application Information:
Adjustability Time: 20-30 minutes (depending on climate and substrate porosity)
Ready for Use: 24 hours
Note: Drying time may vary based on climate, substrate, and tile porosity.
Coverage:
A 500ml tub of Davco® Sanitized Glue Grout covers approximately 0.5m² when applied with a 6mm notched trowel as an adhesive.
Application Steps:
Surface Preparation:
Ensure all surfaces are structurally sound, dry, clean, and free of contaminants like oil, grease, or loose material. Deeply contaminated surfaces should be abraded to expose at least 80% of the original substrate. Follow these preparation guidelines:
Substrate
Specific Requirement
Primer
Rendered brick/blockwork
Cured minimum 7 days, sound
Davco PrimeX or Ultraprime
Fibre-cement sheet/plasterboard
Correctly and firmly fixed
Davco PrimeX or Ultraprime
Previously painted surfaces
Sand back to expose 80% of surface
Davco PrimeX or Ultraprime
Mixing:
No mixing required. Davco® Sanitized Glue Grout is ready to use straight from the pail.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Davco® Sanitized Tile & Grout Sealer is a solvent-based sealer that provides excellent protection against stains, soiling, discolouration, and efflorescence. It’s an easy-to-apply, clear solution that cures to form an invisible, water-repellent coating.
Key Benefits:
Clear solution that cures to an invisible, water-repellent coating
Easy to apply
Usage:
Surfaces:
Only suitable for cement-based grouts
Can be applied over most unglazed porous ceramic tiles
Areas:
Suitable for both interior and exterior applications
Ideal for commercial and domestic wall and floor grout joints
Advantages:
Protects against stains, soiling, and discolouration
Provides an invisible protective layer that repels water
Perfect for enhancing the durability of grout in high-traffic areas
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Davco SMP Evo Tile Adhesive is a high-performance, flexible cement-based adhesive ideal for the installation of natural stone, porcelain, and marble tiles. Specially designed with advanced low-dust technology, it provides a cleaner and safer working environment. Its superior non-slump properties make it perfect for wall and floor tiling, including large-format tiles.
Surface Preparation:
Ensure surfaces are structurally sound, dry, and free from contaminants like dust, oil, and wax. Smooth surfaces should be roughened slightly, and absorbent substrates should be primed. Existing tiles must be clean, dry, and securely bonded.
Mixing:
Mix 5kg of powder with approximately 1.4–1.5L of clean water using a mechanical mixer until a smooth, lump-free paste is formed. Allow it to stand for 5 minutes before remixing. Do not add more water after mixing.
Application:
Apply the adhesive with a notched trowel over an area no larger than can be tiled within the open time. Firmly press tiles into the adhesive bed with a twisting motion to ensure full contact. Back-buttering may be necessary for large tiles or uneven substrates.
Coverage:
Approximately 1.5–1.75m² per 5kg bag using a 10mm notch trowel.
Drying Time:
Tiles can generally be grouted after 24 hours. Allow 2 days before exposure to water in wet areas and 21 days for submerged areas like pools.
Clean-up:
Clean tools and excess adhesive with water before it sets. Once cured, adhesive must be removed mechanically.
Technical Data:
Classification: C2S1TE
Pot life: 1.5 hours
Open time: 30 minutes
Adjustability time: 20 minutes
VOC content: Low
Appearance: White powder
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Davco® Tile & Grout Cleaner is specially formulated to tackle tough dirt and stains from tiles and grout. It’s also effective in removing minor efflorescence, making it a versatile cleaner for common tiled surfaces.
Key Benefits:
Specially formulated ingredients
Effectively cleans tiles and grout
Removes minor efflorescence from grout
Helps remove mould and mildew from grout surfaces
Usage: Davco® Tile & Grout Cleaner is suitable for a wide range of tiled surfaces, including:
Ceramic
Porcelain
Mosaic
Quarry
Slate tiles
It’s ideal for removing tough dirt and stains from tiles, as well as refreshing aged grout.
Packaging:
Size: 1 Litre Jerry Can
Colour: Clear liquid
Application Steps:
Mixing:
Dilute Davco® Tile & Grout Cleaner with water in a clean plastic bucket at a ratio of 10 parts water to 1 part cleaner (e.g., 5L of water to 500ml of cleaner).
Application:
Prepare the Surface: Always wet the surface with clean water using a mop or sponge before applying the product.
For Normal Cleaning: Dampen a mop or sponge with the diluted solution and wipe over the surface, then immediately rinse with clean warm water.
For Heavily Soiled Areas: Apply a larger quantity of the solution and allow it to soak for up to 10 minutes. Scrub the affected area with a stiff nylon brush, then rinse thoroughly with clean warm water.
Keep your tiles and grout clean, refreshed, and free from tough stains and minor efflorescence with Davco® Tile & Grout Cleaner.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Get your adhesive jobs done quickly and cleanly with the GlueMix Disposable Kit. This all-in-one set includes a disposable mixing tray, a sturdy wooden stick, and a pair of lightly powdered, natural rubber gloves for added convenience and protection.
Complete Kit: Everything you need to mix and apply adhesives with ease.
Convenient & Disposable: Use it once and toss it—no cleanup required.
Mess-Free Mixing: The tray keeps your workspace clean and organized.
Durable Wooden Stick: Perfect for precise mixing and spreading.
Protective Gloves: Made from natural rubber, these gloves are lightly powdered for easy on-and-off wear and fit either hand comfortably.
Ideal for epoxy, glue, and resin projects, the GlueMix Disposable Kit is your go-to solution for hassle-free adhesive application. Perfect for repairs, crafts, or one-time projects.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
The DTA Boss Grout Clean Up System Kit is a professional-grade cleaning solution designed to make post-grouting clean-up fast and effortless. Ideal for both tradespeople and DIYers, this all-in-one system helps you remove grout haze and residue from tiles after grouting.
What’s Included:
Heavy-duty cleaning sponge with handle
High-capacity rinse bucket with roller
Surface Preparation:
Before use, ensure that the tiled surface has set appropriately based on grout manufacturer instructions. The grout should be partially cured but not fully hardened — typically 10–30 minutes after application. Remove excess grout with a rubber float before using this cleanup system.
Application Instructions:
Fill the rinse bucket with clean water up to the indicated level.
Use the included sponge to gently clean the surface in a diagonal motion.
Rinse sponge regularly by rolling it over the inbuilt rollers to remove grout particles.
Repeat the process until the grout haze is removed and the tile surface is clean.
Coverage:
Cleans up to approximately 25–50m² per fill depending on tile texture and grout thickness.
Drying Time:
Tiles are generally clean and dry within 30–60 minutes of cleanup depending on ambient temperature and humidity. Ensure proper ventilation for best results.
Clean-Up:
Empty the bucket, rinse the sponge and components with clean water. Dry thoroughly before storing to extend product life.
Technical Data:
Rollers: Dual high-strength plastic rollers
Sponge: Extra absorbent and replaceable
This system is compatible with most grout types including cementitious and epoxy grouts. For stubborn epoxy residue, use in conjunction with a suitable epoxy grout cleaner.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
• Fluoride based formula controls slipping on ceramic, mosaic and quarry tiles, terrazzo and unpainted concrete floors
• Alters surface texture yet maintains the appearance of the floor
• Coverage: 10sqpm per meter
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Dunlop Damp-Proof Waterproofing is an acrylic brush-on membrane designed to prevent rising damp, efflorescence, and resist negative hydrostatic pressure. It adheres excellently to substrates including brick, masonry, concrete block, concrete, stone, and timber, and can be easily applied using a brush or roller. Once cured, it can be overcoated with most decorative paints.
Surface Preparation: Ensure all surfaces are structurally sound and free from existing coatings, adhesives, and efflorescence to achieve maximum bond strength and resistance to hydrostatic pressure. Surfaces may be damp but not wet and must be cleaned free of dirt, grease, oil, or other contaminants. Fill holes and non-structural cracks with a suitable floor repairer before application.
Application Instructions:
For Floors: Spread the material using a brush or long nap roller to achieve coverage, then finish with a long nap roller.
For Walls: Apply using a brush, roller, or spray, ensuring even coverage.
Work the material into voids to avoid pinholing.
For areas affected by hydrostatic pressure, apply a minimum of two coats. The second coat can be applied after 4 hours. Ensure uniform coverage and the required dry film thickness per coat.
Coverage:
Single Coat: Approximately 3m² per litre, per coat, when used as a barrier to efflorescence or as a moisture-resistant coating over green concrete.
Multiple Coats: For areas with hydrostatic pressure, two coats are required at a coverage rate of 1.5m² per litre per coat. Additional coats may be necessary to achieve uniform coverage.
Drying Time: Allow the membrane to cure for 24 hours before applying adhesives, mortars, decorative coatings, or other surface treatments. Ensure the membrane is not damaged during subsequent treatments. For floor surfaces, allow the final coating to cure for at least 24 hours before further treatment to minimize the risk of mechanical damage.
Clean Up: Wash all equipment with water or a water/detergent mixture immediately after use.
Technical Data:
Base: Acrylic
Application Temperature: 10°C to 35°C
Dry Film Thickness: Achieve required thickness as per application guidelines
Curing Time: 24 hours before overcoating
Shelf Life: Refer to packaging for details
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Dunlop Express Wet Area Waterproofing Membrane is a high-performance, fast-drying liquid membrane designed for use in internal wet areas including bathrooms, showers, laundries, and kitchens. This flexible, water-based acrylic polyurethane formulation creates a seamless and highly durable waterproof barrier that is tile-ready within hours.
It’s suitable for use under tile adhesives, screeds, and other flooring products. The product forms a tough, elastomeric layer that resists movement, cracking, and water penetration. It meets the requirements of Class III membranes and is suitable for both floor and wall applications.
Surface Preparation:
Ensure all surfaces are clean, dry, and structurally sound. Remove dust, grease, oil, curing compounds, and loose or flaking materials. Prime all surfaces using a compatible primer. On porous or highly absorbent surfaces, apply a second primer coat if needed. Any existing cracks, gaps, or joints should be sealed or reinforced using bond breakers or reinforcing fabric.
Application Instructions:
Apply the membrane using a brush or roller.
Two coats are required for effective waterproofing.
First coat should be applied in one direction.
Once dry to the touch (approx. 2 hours), apply the second coat in the opposite direction.
Membrane should extend at least 150mm up walls in general wet areas and 1.8m in shower recesses.
Waterproofing must be applied continuously and without breaks or pinholes.
Use reinforcing fabric over joints and corners if required.
Avoid application in conditions below 10°C or above 35°C.
Coverage:
Approximately 1m² per litre per coat. A 5kg pail covers roughly 2.5m² with two coats, depending on surface porosity.
Drying Time:
Touch dry: 1–2 hours
Recoat time: 2 hours
Ready for tiling: 4–6 hours
Fully cured: 24 hours
Drying times will vary with ambient temperature and humidity.
Clean Up:
Clean tools and equipment immediately after use with water. Do not allow membrane to dry on tools.
Technical Data:
Type: Water-based acrylic polyurethane
Classification: Class III membrane
Application Method: Brush or roller
Flexibility: High
Water Resistance: Excellent
Colour: Grey
Shelf Life: 12 months (unopened in cool, dry conditions)
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Dunlop Floor Repairer Rapid Patch Mortar is a high-performance, fast-setting compound ideal for repairing holes, cracks, and uneven surfaces on internal floors. Suitable for use prior to the installation of tiles, vinyl, carpet, or other floor coverings, it delivers a smooth, level finish ready for light foot traffic within 45 minutes and covering applications in as little as 2 hours.
Surface Preparation:
Ensure the substrate is clean, sound, and free of grease, dust, oil, paint, or other contaminants. Surfaces should be dry and firm. Smooth or sealed surfaces must be roughened or etched. For porous substrates like timber, fibre-cement, or plasterboard, priming may be required. For floors in direct contact with soil, a moisture barrier should be used before applying the patch mortar.
Mixing Instructions:
Add 5kg of product into approximately 1.5L of clean water in a clean container. Mix thoroughly with a mixing paddle to a lump-free, smooth consistency. Mix only what can be used within 15 minutes.
Application Instructions:
Apply with a steel trowel to the required thickness (up to 20mm in a single application). Shape and smooth the surface before the material begins to set. For deeper repairs, additional layers can be applied once the initial layer has set. Avoid adding extra water once mixed.
Coverage:
Approximately 3m² at 1mm thickness per 5kg bag. Coverage varies with surface texture and thickness applied.
Drying Time:
Initial set: ~45 minutes
Ready for coverings (tiles, vinyl, carpet): ~2 hours
Final cure: 24 hours (depending on thickness and ambient conditions)
Clean Up:
Clean tools and equipment immediately with water before the mortar sets.
Technical Data:
Type: Rapid-setting cementitious repair mortar
Application Thickness: Up to 20mm
Pot Life: 15 minutes
Foot Traffic: 45 minutes
Ready for Coverings: 2 hours
Colour: Grey
Shelf Life: 12 months in original unopened packaging stored in a dry area
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Dunlop Floor Tile Adhesive is a high-performance, general-purpose adhesive suitable for ceramic, porcelain, mosaic, and some natural stone tiles (excluding moisture-sensitive stones). It can be used on cement screeds, concrete, and compressed fibre-cement sheets for both indoor and outdoor flooring.
DUNLOP FLOOR TILE ADHESIVE is a versatile general-purpose adhesive designed for fixing a range of floor tiles, both indoors and outdoors. It adheres well to surfaces like concrete, compressed fibre-cement sheets, cement screeds, and existing tiles. For timber floors or areas with potential movement, use DUNLOP WALL AND FLOOR TILE ADHESIVE instead.
SUBSTRATES
Concrete
Cement screeds
Compressed fibre-cement sheets
Existing ceramic tiles (indoors only)
TILE TYPES
Ceramic
Porcelain
Natural stone (excluding moisture-sensitive varieties)
Mosaics
Fully vitrified and translucent tiles
COLOUR: Grey
SURFACE PREPARATION
Ensure the surface is consistently flat, firmly fixed, and free of dust, oil, grease, or other contaminants. All surfaces must be clean and dry with no residual moisture or permanent dampness. Prime porous substrates with DUNLOP PRIMER & ADDITIVE or DUNLOP MULTIPURPOSE PRIMER.
Concrete Floors
Concrete must have a wood float finish and be fully cured (min. 4 weeks). Screeds should be at least 7 days old. Remove sealers, curing compounds, or any laitance by mechanical means. Roughen steel trowel finishes to ensure bonding.
Cement Screeded Floors
Ensure screeds are properly cured and level, finishing with a wood float. New screeds must cure for at least 7 days before tiling.
Compressed Fibre-Cement Sheets
Install according to the manufacturer's instructions, ensuring the surface is clean. Priming is recommended.
Existing Tiles (indoors only)
Ensure tiles are stable and roughen their surfaces by mechanical means, removing at least 80% of the glaze.
MIXING
Mix the adhesive by adding powder to water. Use approx. 400ml of water per 1kg of powder. Stir to a thick, creamy consistency using a mechanical mixer, let stand for 5 minutes, and re-stir. The mixture is usable for 2.5 hours depending on temperature.
APPLICATION
Tile installation should comply with AS3958.1 standards. Use a notched trowel (10mm for floors) to apply. Spread adhesive over 1m² sections to avoid skinning before tile bedding. Ensure full coverage by pressing tiles at right angles to the adhesive. Large tiles or those with deep keys may require back buttering.
Remove excess adhesive from joints and surfaces before the adhesive sets. Allow at least 24 hours for the adhesive to cure before grouting.
DRYING TIMES & GROUTING
Grouting can begin after 24 hours at 23°C and 50% humidity. For larger tiles or humid climates, extend drying time. Use DUNLOP COLOURED GROUT or DUNLOP WIDE JOINT GROUT for joints wider than 8mm.
MOVEMENT JOINTS
Follow AS3958 standards for movement joints. Ensure joints are present at 3–5m intervals and around the perimeter. Keep joints approx. 6mm wide and fill with a flexible material like DUNLOP COLOURED SILICONE.
COVERAGE
Coverage varies based on substrate and trowel size:
10mm trowel: approx. 0.4m² per kg
For example:
4kg covers approx. 1.6m².
CLEAN UP
Clean tools and spills with water immediately after use.
SHELF LIFE
12 months if stored in original, unopened packaging at 23°C and 50% relative humidity.
PRECAUTIONS
Not suitable for continuous immersion (e.g. pools). Use DUNLOP TILE-ALL for these applications.
Avoid use on timber or non-absorbent substrates (e.g. metal).
Ensure proper PPE is worn during preparation and application.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
A water-based protective sealer which penetrates and cures within the pores of the grout. The sealer is fast drying and the bottle contains a brush for easy application.
A water-based protective sealer
Deep penetrating into the grout
Easy to use brush for perfect sealing over grout
Fast drying formula
Coverage
Seals up to 25m2 per 250ml
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
High-Performance Ready-Mixed Ceramic Tile Adhesive
This high-grab adhesive is designed to support even the heaviest wall tiles, providing superior flexibility for interior applications, particularly in kitchens and bathrooms.
Key Features:
Ready-mixed adhesive
High grab for heavy wall tiles
Superior flexibility
Tile Types:
Ceramic wall tiles
Granite
Marble (excluding moisture-sensitive stone)
Suitable Surfaces:
Cement render
Fibre-cement sheets
Painted surfaces (properly prepared)
Plasterboard
Application Areas:
Indoor walls
Coverage:
0.5m² per kg
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Dunlop Primer & Additive is a water-based multipurpose solution that improves the bond between porous substrates and adhesives, waterproofing membranes, or screeds. It can be used as a primer before tiling or as an additive to strengthen screeds and grouts.
Surface Preparation:
Ensure the surface is clean, dry, and free of dust, oil, wax, paint, or other contaminants. For new concrete or screeds, allow to cure completely. Fill cracks and voids using a patching compound.
Application Instructions:
As a primer, dilute 1 part Dunlop Primer & Additive with 3 parts water. Apply evenly using a brush or roller. Allow it to dry for at least 30 minutes before applying adhesives or membranes.
As an additive, replace part or all of the mixing water in tile adhesives or grouts to improve flexibility and adhesion. Follow the manufacturer's recommended ratios.
Coverage:
Approximately 6–10m² per litre, depending on surface porosity.
Drying Time:
Allow to dry for at least 30 minutes before overcoating. Drying may vary depending on temperature and humidity.
Clean Up:
Clean tools and equipment with water immediately after use.
Technical Data:
Base: Water-based acrylic polymer
pH: Neutral
Appearance: Milky white liquid
Shelf Life: 12 months (unopened in cool, dry conditions)
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Dunlop Multipurpose Floor Leveller is a high-flow, cement-based compound ideal for smoothing and levelling uneven internal concrete surfaces before applying tiles, vinyl, carpet, or other floor coverings. Designed for ease of use, it pours and spreads to form a smooth surface ready for foot traffic and covering in minimal time. It’s perfect for domestic and light commercial applications.
Surface Preparation:
Ensure the surface is sound, dry, and clean. Remove all traces of dust, grease, oil, curing compounds, wax, or any loose particles. New concrete must be fully cured. Mechanically remove surface laitance or contamination. Porous surfaces may require priming to reduce absorption and improve adhesion.
Priming (if required):
Apply a compatible primer using a broom or roller and allow it to dry before applying the leveller. On extremely porous substrates, a second coat may be necessary.
Mixing Instructions:
Slowly add the contents of the 5kg bag to approximately 1L of clean water while stirring with a mixing paddle. Mix for 2–3 minutes until a lump-free, smooth consistency is achieved. Do not retemper once the mixture begins to set.
Application Instructions:
Pour the mixed product onto the floor and spread using a steel trowel or smoothing blade. The product will self-level and settle to a smooth finish. Apply at a thickness of 1–10mm in one application. Protect from foot traffic until it is fully cured.
Coverage:
Covers approximately 3.5m² at 1mm thickness per 5kg bag. Coverage varies with substrate texture and thickness.
Drying Time:
Walkable: 4 hours
Ready for tiling: 4–6 hours
Ready for other coverings: 24 hours
Dry times will vary depending on temperature, humidity, and layer thickness.
Clean Up:
Clean tools and mixing equipment with water immediately after use. Do not allow the product to dry on tools or surfaces.
Technical Data:
Type: Cement-based self-levelling compound
Application Thickness: 1mm to 10mm
Working Time: 15–20 minutes
Walkable: After 4 hours
Final Cure: Up to 24 hours
Colour: Grey
Shelf Life: 12 months if stored in original, sealed packaging
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
A water-based, penetrating sealer that maintains the natural surface appearance while offering superior stain resistance against both oil and water-based stains. It is ideal for indoor and outdoor use with excellent UV resistance, suitable for a variety of surfaces.
Key Benefits:
Superior stain resistance (oil and water)
Easy to clean and maintain
Excellent UV resistance, ideal for outdoor areas
Surface Preparation:
Ensure surfaces are free from dust, dirt, grease, oil, previous coatings, adhesives, and other contaminants. Any stains or surface irregularities present at the time of application will be locked into the final finish. Test sealer on a small, inconspicuous area to ensure suitability.
Application:
Apply sealer by brush, roller, or low-volume spray applicator.
Avoid excess application. Remove any material that hasn’t penetrated after 10 minutes with a cloth. Most surfaces require two coats, but porous surfaces may need additional coats. Allow 30 minutes drying time between coats.
Drying Time:
30 minutes to 1 hour between coats.
24 hours before light foot traffic.
3 days for rubber wheeled traffic.
7 days for full curing.
Coverage:
1L covers approximately 20m² per coat, depending on surface porosity.
Clean-Up:
Clean all equipment immediately after use with warm water or a water/detergent solution.
Shelf Life:
12 months when stored in an unopened container at 23°C.
Precautions:
While it repels immediate spills, the sealer’s stain resistance diminishes if spills are left unaddressed.
This product is not a waterproofing solution and is not recommended for use around swimming pools.
Safety:
Avoid inhalation, and eye or skin contact. In case of contact, rinse thoroughly with water. If swallowed, seek immediate medical advice. Always refer to the MSDS available on the Dunlop website.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
A water-based, penetrating sealer that maintains the natural surface appearance while offering superior stain resistance against both oil and water-based stains. It is ideal for indoor and outdoor use with excellent UV resistance, suitable for a variety of surfaces.
Key Benefits:
Superior stain resistance (oil and water)
Easy to clean and maintain
Excellent UV resistance, ideal for outdoor areas
Surface Preparation:
Ensure surfaces are free from dust, dirt, grease, oil, previous coatings, adhesives, and other contaminants. Any stains or surface irregularities present at the time of application will be locked into the final finish. Test sealer on a small, inconspicuous area to ensure suitability.
Application:
Apply sealer by brush, roller, or low-volume spray applicator.
Avoid excess application. Remove any material that hasn’t penetrated after 10 minutes with a cloth. Most surfaces require two coats, but porous surfaces may need additional coats. Allow 30 minutes drying time between coats.
Drying Time:
30 minutes to 1 hour between coats.
24 hours before light foot traffic.
3 days for rubber wheeled traffic.
7 days for full curing.
Coverage:
1L covers approximately 20m² per coat, depending on surface porosity.
Clean-Up:
Clean all equipment immediately after use with warm water or a water/detergent solution.
Shelf Life:
12 months when stored in an unopened container at 23°C.
Precautions:
While it repels immediate spills, the sealer’s stain resistance diminishes if spills are left unaddressed.
This product is not a waterproofing solution and is not recommended for use around swimming pools.
Safety:
Avoid inhalation, and eye or skin contact. In case of contact, rinse thoroughly with water. If swallowed, seek immediate medical advice. Always refer to the MSDS available on the Dunlop website.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Dunlop Premixed Resaflex is a ready-to-use, flexible tile adhesive ideal for interior wall applications, including cement render, plasterboard, and fibre-cement sheets. It bonds strongly to ceramic tiles. Prior to application, ensure surfaces are clean, dry, and free from contaminants. Apply with a notched trowel and allow 24 hours before grouting. Coverage varies based on tile size and trowel used—typically 0.3m²-0.7m² per kg. Drying time is 24 hours. Clean tools and spills with water before the adhesive dries. Avoid use on floors or waterproofing membranes.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
DUNLOP®WALL TILE ADHESIVE is a ready-mixed indoor wall tile adhesive. Ideal for all types of ceramic wall tiles and dimensional stones such as marble and granite, it can be used on a number of surfaces which include compressed fibre-cement sheets, plasterboard, cement render and adequately prepared painted surfaces (oil-based paint only). DUNLOP®WALL TILE ADHESIVE has superior flexibility and high grab to support even the heaviest of wall tiles.
SURFACE PREPARATION
Surfaces must be consistently flat and firmly fixed. Clean off dust, oil, grease and all loose contaminating materials or coatings. Ensure surfaces are dry, with no residue or permanent dampness. Prime porous surfaces (e.g. fibre- cement sheets, cement render) with DUNLOP®PRIMER & ADDITIVE beforehand and allow to dry.
Cement Render
Allow to cure for at least 7 days. Render should have a wood float finish.
Plasterboard
There is no need to prime the cardboard surface. However, where sheets are joined, DUNLOP®PRIMER & ADDITIVE must be used over the base jointing compound. Do not use the topping compound in areas which are to be tiled.
Compressed Fibre-Cement Sheets
Remove surface dust with a damp sponge and prime with DUNLOP®PRIMER & ADDITIVE and allow to dry before tiling.
Painted Surfaces
Oil-based paint should be roughened mechanically and loose flaking paint should be removed. Ensure the paint is suitable for tiling over. Thoroughly remove water-based paints. Do not use paint stripper or solvents. Allow surface to dry after cleaning.
MIXING
No mixing required.
APPLICATION
As a general guide use a 6mm notch trowel to spread adhesive achieving a minimum 1mm bed thickness. Do not wet tiles before fixing. If backs of tiles are dusty clean with a damp sponge.
Spread the adhesive with the notches running horizontally across the wall.
Spread only one square metre at a time and ensure a skin has not developed on the adhesive before bedding tiles.
Press and slide the tile into position ensuring the whole of the back of the tile is in good contact with the adhesive.
Use tile spacers if desired to ensure even spacing.
Remove any surplus adhesive on face of tile or between joints before it sets.
Adjustment of tiles should be carried out within 60 minutes of laying (at 23°C and 50% humidity).
COVERAGE
DUNLOP®WALL TILE ADHESIVE will cover approximately 0.5m2per kg. Coverage will vary depending on the condition of the surface being tiled and application technique.
DRYING TIME
DUNLOP®WALL TILE ADHESIVE will dry in approximately 24 hours depending on ambient temperature, porosity of surface and tiles.
MOVEMENT JOINTS
Incorporate movement joints at 3.5m intervals and at internal corners. Any structural movement joints must be carried through to the face of the tiling, at junctions between different background material and at fixtures interrupting the tile surface. These joints should be about 6mm wide and and kept free from adhesive. They should be filled with a high quality flexible material e.g. DUNLOP®COLOURED SILICONE.
GROUTING
Wait until adhesive has set. This takes approximately 24 hours. Remove tile spacers and use DUNLOP®GROUT adding DUNLOP®PRIMER AND ADDITIVE to enhance colour, impart a degree of flexibility and reduce porosity and staining. For easier maintenance seal with DUNLOP®GROUT SEALER.
CLEAN UP
While it is still fresh, DUNLOP®WALL TILE ADHESIVE can be cleaned off with a damp sponge. Tools, hands and material soiled with adhesive can be easily cleaned with water as long as the adhesive is still fresh.
CAUTION
Do not use DUNLOP®WALL TILE ADHESIVE to fix green marble. Do not use DUNLOP®WALL TILE ADHESIVE in
continuous immersion applications e.g. swimming pools, tanks etc.. Do not use DUNLOP®WALL TILE ADHESIVE over non- absorbent substrates and waterproofing membranes due to prolonged drying times.
DUNLOP GUARANTEE
Product is guaranteed for 10 years when installed to manufacturers instructions. Manufactured under a quality system certified as complying with ISO 9001 by an accredited certification body. Material Safety Data Sheets are available
TECHNICAL DATA
Characteristics of product:
Colour: White
Viscosity: 790 000 cps
S.G: 1.47g/cm3
pH: 9.1
Form: Viscous paste
Application Properties: (@23°C and 50% relative humidity) Open Time: 80 mins
Adjustability Time: 60 mins
Mechanical Properties:
Fundamental Characteristics Shear adhesion strength: Shear adhesion strength after aging:
2.5 Mpa
(AS 4992.1)
Minimum requirements 1.0Mpa (D1)
3.5 Mpa
1.0Mpa (D1)
SAFETY
Keep out of the reach of children. If skin contact occurs wash skin thoroughly with running water. If swallowed, give a glass of water and contact Poisons Information Centre. In case of contact with eyes, rinse with plenty of water and contact a Doctor. MSDS available on request.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Dunlop Premixed Resaflex is a ready-to-use, flexible tile adhesive ideal for interior wall applications, including cement render, plasterboard, and fibre-cement sheets. It bonds strongly to ceramic tiles. Prior to application, ensure surfaces are clean, dry, and free from contaminants. Apply with a notched trowel and allow 24 hours before grouting. Coverage varies based on tile size and trowel used—typically 0.3m²-0.7m² per kg. Drying time is 24 hours. Clean tools and spills with water before the adhesive dries. Avoid use on floors or waterproofing membranes.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Dunlop Revive & Shine
Dunlop Revive & Shine is a neutral, multipurpose cleaner and maintainer that enhances the appearance of sealed floors. Designed for use on timber, vinyl, and laminate floors, this product reduces the appearance of scuffing, increases durability, and improves gloss levels. For best results, use monthly to keep your floors looking their best.
Key Benefits:
Cleans and maintains timber, vinyl, and laminate flooring
Provides extra durability, wear resistance, and shine
Increases slip resistance
Reduces the appearance of scuffing
Ideal for monthly maintenance
Suitable For Use On:
Timber, vinyl, and laminate flooring
Surface Type:
Floors
Location:
Indoor
Colour & Sizes:
Colour: Milky (Dries Clear)
Size: 500ml
Item Code: 19882
Directions for Use:
Dilution: Mix 20mL of Dunlop Revive & Shine per 1L of warm water in a bucket.
Cleaning: Mop the floor with the solution.
Spills: For spills, hose down the area and wash with large amounts of water.
Note: The use of Personal Protective Equipment is recommended during application.
Dunlop Revive & Shine is perfect for keeping your timber, vinyl, and laminate floors looking like new, providing enhanced shine, durability, and slip resistance.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
An effective and easy-to-use neutral cleaner designed to remove general household dirt, grime, and oils from tiles and grout. Ideal for daily use, this cleaner is powerful enough to tackle grease in kitchens and bathrooms while being gentle enough for regular application.
Key Benefits:
Powerful cleaner for tiles and grout
Effectively removes grease in kitchens and bathrooms
Regular use reduces mould and mildew growth
Suitable for general-purpose surface cleaning
Cost-effective when diluted and applied by spray
Easy to use for everyday cleaning
Use On:
Tiles, grout, and general household surfaces
Surface Type:
Walls and floors
Location:
Indoor and outdoor use
Colour & Sizes:
Size: 1L
Item Code: 22504
Coverage:
Wipe On: Dilute 10ml per 1L of water
Spray On: Dilute 6ml per 1L of water
Directions for Use:
Test First: Before the first application of Dunlop Tile & Grout Cleaner, test a small amount of product in an inconspicuous area to ensure the desired result.
Dilution: Mix 10mL of Dunlop Tile & Grout Cleaner per 1L of water. For best results, use hot water.
Application: For general cleaning, apply the cleaner using a mop. For stubborn dirt, use an appropriate scourer or scrubbing pad that won't scratch the tile surface.
Keep your tiles and grout clean and fresh with this powerful, easy-to-use cleaner, perfect for daily household maintenance.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
This versatile adhesive is specially formulated for fixing most tile types, offering excellent flexibility and suitability for various surfaces.
Key Features:
Suitable for most tile types
Can be applied over a variety of surfaces
Suitable for interior timber (with proper preparation)
Highly flexible
Tile Types:
Ceramic tiles
Fully vitrified tiles
Mosaics
Porcelain tiles
Natural stone (excluding moisture-sensitive stone)
Suitable Surfaces:
Cement render and concrete
Fibre-cement sheets
Existing ceramic and vinyl tiles
Dunlop Undertile Waterproofing
Metal surfaces
Oil-based painted surfaces
Plasterboard
Indoor timber (must be adequately prepared)
Application Areas:
Walls and floors
Indoor and outdoor use (as long as there’s no standing water and proper water run-off is ensured)
Coverage:
Tile Size
Trowel Size
Coverage
Up to 250 x 250mm
6-8mm
0.8m²/kg
250 x 250mm and larger
10-12mm
0.5m²/kg
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
High-Performance Multipurpose Wall & Floor Tile Adhesive
This versatile adhesive is designed for fixing almost all tile types to a wide range of challenging surfaces, including water features and swimming pools.
Key Features:
Suitable for both walls and floors
Can be applied over difficult surfaces, including water features
Allows tiling over existing tiles
Compatible with most types of ceramic and natural stone (excluding moisture-sensitive stone)
Tile Types:
Ceramic tiles
Fully vitrified tiles
Natural stone (excluding moisture-sensitive stone)
Mosaics
Porcelain
Suitable Surfaces:
Existing tiles
Glazed ceramic tiles
Metal
Roughened fibreglass
Timber (particleboard only)
Application Areas:
Walls and floors
Indoor and outdoor
Water features and swimming pools
Coverage:
Tile Size
Trowel Size
Coverage
Up to 250 x 250mm
6-8mm
0.4m²/kg
250 x 250mm and larger
10-12mm
0.25m²/kg
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Colours to suit almost any timberWaxstix are so easy to use and so handy for quick repairs to scratched or damaged timber. Waxstix can be coated and stained. Plus, Waxstix contain no beeswax so they will not leave any white ring marking otherwise known as the "halo effect".
For most small scratches, simply rub the stick over the damaged area. For larger, deeper indentations (where TIMBERMATE water-based Woodfiller cannot be used), heat a knife blade with a flame or a soldering iron or stove lighter and fill the damaged area with hot wax. Remove excess wax by rubbing with the smooth side of sandpaper, a piece of cardboard or an old credit card. Use a cotton cloth to buff and remove excess wax.
Out Of Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Earl’s Graffiti Barrier & Remover System – Non-Toxic, Biodegradable
Stop graffiti before it sticks—and remove it fast when it does. This two-part system pairs a sacrificial Graffiti Barrier coating with a powerful, non-caustic Graffiti Remover. Use the Barrier to shield vulnerable surfaces so future tags release easily, and use the Remover to dissolve existing graffiti on common building substrates. Both products are non toxic, contain no caustic soda, and are designed for safe, simple use in domestic or commercial settings.
Why choose this system
Complete solution: Protect plus remove—works as a proactive coating and a reactive cleaner.
Non-toxic & biodegradable: No caustic soda; safer handling and cleanup.
Wide surface compatibility: Brick, cement render, timber fences, stone, metal, garage doors, and signage (always test first).
Fast turnaround: Barrier rolls or brushes on quickly; Remover dissolves graffiti that can be rinsed away with water.
Made for Australian conditions: Practical directions for real-world sites—homes, schools, retail, body corporate assets, and councils.
What’s in the box
Earl’s Graffiti Barrier: A sacrificial, protective coating that forms an invisible* shield to make future clean-downs faster and gentler.
Earl’s Graffiti Remover: A non-caustic cleaner that dissolves graffiti so residues can be scrubbed and rinsed away.
*Appearance may vary by substrate; see Specifications and always test a small area first.
Where to use
Masonry: Bricks, blockwork, stone, concrete/cement render.
Timber & metal: Timber fences, metal doors, garage doors, and metal signage.
High-risk zones: Laneways, rear service doors, fence lines, public-facing walls, and transport corridors.
How it works
The Barrier creates a sacrificial layer. When tagging occurs later, graffiti sits at or near the surface and releases more readily during cleanup. The Remover penetrates and dissolves paints/inks so they can be agitated and rinsed from the substrate, especially effective on porous mineral surfaces and surfaces previously treated with the Barrier.
Directions
1) Apply the Graffiti Barrier (preventive)
Prep: Surface must be clean, dry, sound, and free of dust, oil, or old failing coatings. Mask adjacent areas.
Application: Stir/shake well. Apply sparingly by roller or brush in a single, consistent roll direction.
Coverage: Up to ~6 m²/L on render or dark/porous surfaces (coverage varies by substrate profile and porosity).
Conditions: Do not apply below 12 °C or in very cold/damp conditions.
Appearance: Dries to an opaque protective film; test a small inconspicuous area to confirm finish/visual impact.
2) Use the Graffiti Remover (reactive)
For unpainted mineral surfaces: Spray or liberally apply Remover directly to the graffiti. Allow time for the film to soften/dissolve.
Agitate: Scrub with a stiff bristle brush to lift residues from pores and profiles.
Rinse: Wash off thoroughly with clean water. Repeat on deeply embedded areas if required.
Barrier not previously applied? The Remover can still be used to clean most common surfaces; repeat as necessary.
Pro tips
Always conduct a spot test in an inconspicuous area to verify appearance and cleaning performance.
Highly porous or dark substrates may need additional coats of the Barrier for consistent protection.
Schedule maintenance inspections in high-risk locations so tags are removed promptly, discouraging re-offending.
Clean-up & safety
Use appropriate PPE (gloves/eye protection). Provide ventilation when working in enclosed areas.
Avoid runoff into drains and waterways. Collect residues where practical and dispose of in accordance with local regulations.
Store sealed in a cool, dry place away from direct sun and sources of ignition. Keep out of reach of children.
Specifications
Property
Graffiti Barrier
Graffiti Remover
Function
Sacrificial protective coating to ease future graffiti removal
Non-caustic graffiti dissolver for reactive cleaning
Key claims
Non toxic, non caustic, biodegradable
Non caustic; designed to dissolve graffiti for water rinsing
Suitable substrates
Brick, cement render, stone, timber fences, metal, garage doors
Brick, cement render, stone, timber fences, metal, garage doors, metal signs
Appearance / finish
Dries opaque (test first for visual impact)
Clear liquid cleaner (appearance varies by manufacturer’s batch)
Application method
Roller or brush (single roll direction)
Spray/apply, dwell, scrub, rinse with water
Coverage (guide)
Approx. 6 m²/L on render or dark/porous surfaces (substrate dependent)
Consumption varies with thickness of graffiti and porosity
Application temperature
Do not apply below 12 °C
Use in ambient conditions; avoid extreme heat/cold; ventilate area
Cleanup
Allow to dry; future clean-downs remove tags more easily
Rinse dissolved residues thoroughly with clean water
Typical uses
Preventive protection for high-risk surfaces
Removal of existing tags and markers
Out Of Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Earl’s MiracleWipes – Innovative, Professional-Grade Cleaning Wipes
Meet the jobsite and workshop essential that takes on the messes others can’t. MiracleWipes® are purpose-built to remove tough contaminants like oil-based paint, latex paint, epoxy, spray paint, stain, grease, oils, adhesives, ink, and grime from hands, tools, and surfaces. The unique absorbent-lock design grabs and traps residue so it doesn’t smear, while the low-solvent formula is surface and skin safe when used as directed. Dual-texture wipes (scrub on one side, smooth on the other) give you the control to lift heavy build-up then finish clean. Seeing is believing!
Why You’ll Love It
Removes paint & epoxy fast: Cuts through wet and semi-cured paints, epoxies, stains, grease and more.
Absorb & lock technology: Traps mess in the wipe to reduce smearing and re-depositing.
Dual-texture performance: Textured side agitates; smooth side finishes clean.
Low solvent, professional grade: Powerful on mess, considerate on common jobsite materials.
Surface & skin safe: Designed for hands, tools, and non-porous surfaces when used as directed.
Large wipe size: 12" × 6" sheets give you more cleaning area per pull.
Clean, no-rinse finish: Leaves no heavy, oily residue; dries quickly.
Smart canister: One-at-a-time dispense with a tight snap-seal lid to keep wipes fresh.
Where It Works
Ideal for use on:
Hands & skin: Great for cleanup after painting or epoxy work (avoid eyes, mouth, and broken skin).
Tools & equipment: Brushes, rollers, spray guns, trowels, mixers, blades, scrapers.
Common surfaces: Metals, coated plastics, laminates, sealed wood, glass, tiles, stone benchtops (sealed), vinyl & PVC.
Prep before painting: Wipe down to remove dust, light oils, fingerprints and shop grime prior to coating.
Always test on an inconspicuous area first. Not recommended for unfinished leather, delicate textiles, or uncured high-gloss finishes.
How To Use
Open the snap-seal lid and pull one wipe through the dispenser.
Use the textured side first to loosen paint, epoxy, grease, or grime.
Flip to the smooth side to lift away residue and finish clean.
For stubborn spots, hold the wipe against the area briefly, then wipe again. Repeat with a fresh wipe if needed.
Close the lid firmly after each use to prevent drying out. Dispose of wipes in the bin—do not flush.
Pro Tips
Epoxy cleanup: Tackle while epoxy is wet or green for fastest results.
Surface prep: After wiping, allow to air dry, then apply coatings per product directions.
Electronics & sensitive parts: Power down first; use a lightly damp section of the wipe and avoid pooling liquid.
Frequently Asked Questions
Will MiracleWipes remove fully cured epoxy?They excel on wet and semi-cured residues. Fully cured epoxy typically requires mechanical removal; wipes help with final cleanup.
Are they safe on skin?Yes when used as directed on hands. Avoid contact with eyes and broken skin. Rinse with water after heavy use if desired.
Do they leave residue before painting?The low-residue formula dries quickly. For best coating adhesion, allow the surface to dry or give a quick final wipe with a clean, dry cloth.
Can I use them on automotive paint or delicate finishes?Test first in a hidden spot, especially on fresh or uncured coatings.
Are the wipes flushable?No. Dispose of used wipes in general waste.
What’s In The Pack
Count: 90 pre-moistened, dual-texture wipes
Wipe size: 12" × 6" (approx. 30.5 × 15.2 cm)
Dispenser: Resealable snap-seal canister
Storage & Handling
Keep lid closed to prevent drying. Store upright in a cool, dry place.
Keep out of reach of children. Use in a well-ventilated area.
Do not ingest. Do not flush.
Specifications
Brand
Earl’s
Product
MiracleWipes® – Innovative Cleaning Wipes
Primary Use
Removal of paint (oil & latex), epoxy, spray paint, stain, grease, oils, adhesives, inks, and grime
Wipe Construction
Dual-texture (scrub + smooth), high-absorbency lock design
Wipe Size
12" × 6" (approx. 30.5 × 15.2 cm)
Pack Size
90 wipes per canister
Solvent Level
Low solvent
Skin/Surface Safety
Surface & skin safe when used as directed
Residue
Low-residue, fast-dry
Country of Manufacture
Made in the USA
Dispensing
One-at-a-time pull through snap-seal lid
Disposal
General waste only; do not flush
Suggested Applications
Trade & DIY paint cleanup (rollers, brushes, sprayers, trays)
Epoxy projects (boats, composites, woodwork, crafts)
Auto & equipment maintenance (oils, grease, grime)
Site prep and tidy between coats
Workshops, garages, construction, facilities maintenance
Out Of Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Earl’s MulTfill Multi-Purpose Paintable Putty
Brand: Earl’s
Earl’s MulTfill is a premium, ready-to-use multi-purpose filler designed for fast, clean, and durable repairs across interior and exterior projects. The heavy-bodied formula spreads smoothly, levels cleanly, and dries hard without shrinking, sinking, cracking, or falling out. With zero VOCs and no acrylics, latex, or solvents, it’s a low-odour choice for homes, workshops, and job sites. Clean-up is simple with water, and once dry MulTfill sands easily to a fine, paint-ready surface.
Why you’ll love it
Ready from the tub: no mixing, no mess, no wastage — just open, apply, and close.
Zero VOCs: stable, low odour and user-friendly.
Non-sinking, non-shrinking: fills stay flush and true.
Won’t fall out: dries hard for lasting repairs.
Paintable finish: accepts most coatings for a seamless result.
Sands like a dream: refined finish without clogging when sanded dry.
Long shelf life: keep the lid sealed and it’s ready when you are.
Where it works
Use MulTfill on common building materials including wood (including weathered and damaged sections once sound), masonry, plasterboard, cement sheet, concrete, and primed metal. It’s ideal for nail holes, dents, shallow voids, corner repairs, skim touch-ups, and general surface preparation before painting.
Colour options
White, Teak (Cypress), Ebony, Grey, Jarrah, Merbau, Walnut.
How to use
Prep: Ensure the area is clean, dry, and sound. Remove loose material and dust. For best glide, lightly wet your putty knife.
Apply: Press firmly to fill the defect and smooth off. For deep voids, apply in layers up to 6 mm per pass, allowing each layer to dry before the next.
Sand: Once fully dry, sand with 120 grit or finer to achieve a smooth, level surface.
Coat: Prime if required, then paint. For clear finishes, tint the filler with suitable colorants or oxides before application to harmonise with surrounding material.
Cleanup & care: Clean tools with water. If product thickens in the tub, add a few drops of clean water and stir until smooth. Always reseal promptly.
Pro tips
Feather edges wide when blending across boards or wall patches.
On exterior jobs, protect from rain during cure and overcoat appropriately for exposure.
Tinting before clear coats helps the repair visually disappear on timber substrates.
Specifications
Brand
Earl’s
Product Type
Multi-purpose paintable putty / filler (water-based)
Use
Interior and exterior
VOC
Zero VOC
Contains
No acrylic, latex, or solvents
Substrates
Wood, masonry, plasterboard, cement sheet, concrete, primed metal
Application Thickness
Up to 6 mm per layer; allow to dry between layers
Sanding
Dry sand; 120 grit or finer
Overcoating
Accepts most paints; for clear coats, tint filler first for best colour match
Clean-up
Water
Colours
White; Teak (Cypress), Ebony, Grey, Jarrah, Merbau, Walnut
Pack Sizes
140 g, 600 g, 1 kg, 2 kg, 3 kg (varies by colour)
Shelf Life
Up to 5 years if sealed and stored correctly
Country of Origin
Australia
Storage
Keep container tightly closed when not in use. Store in a cool, dry place out of direct sun. Avoid prolonged freezing. If product thickens, add a few drops of water and mix to restore spreadability.
What’s in the tub
A smooth-spreading, heavy-bodied filler that levels cleanly, sands easily, and delivers a paint-ready finish across interior and exterior surfaces — with no mixing, no fuss, and no strong odour.
Out Of Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Earl’s MulTflex® Exterior Flexible Filler is a unique, single-pack, ready-to-use flexible filler and adhesive formulated for lasting repairs on timber and masonry. It delivers a durable, non-shrinking, non-sinking finish that won’t crack with vibration and won’t fall out, making it ideal for exterior maintenance where movement and weather can defeat ordinary fillers. Paintable when dry and formulated with no volatile organic compounds (No VOCs), it’s a dependable, low-odour solution for professional results at home or on site. Proudly 100% Australian made and owned.
Why you’ll love it
Exterior-grade flexibility: absorbs movement and vibration without cracking.
Non-shrink & non-sink: holds profile and edge detail after cure.
Won’t fall out: engineered adhesion for long-term durability.
Ready to use: straight from the tub — no mixing, no mess, no waste.
Paintable: achieves a seamless, colour-matched finish once dry.
No VOCs: low odour, solvent-free formula.
Interior / Exterior: versatile enough for both.
Proudly Australian: made and owned in Australia.
Where it works
Use Earl’s MulTflex® to repair and rebuild on a wide range of common building substrates:
Timber: decks, window frames, trims, fascia, general carpentry repairs.
Masonry: brick, block, render and patching mortar-like defects.
Plasterboard: exterior-exposed linings under cover and general patching.
Metals & gutters: non-structural filling and profiling (clean, sound, free of rust).
Around pipes & penetrations: neat, gap-free finishing before painting.
Glass & surrounds: edge repairs and feathering prior to topcoating.
Ideal projects
Rebuilding weathered or rotten timber edges before repainting.
Filling cracks and surface imperfections in rendered walls.
Profiling and feathering joints and transitions for a paint-ready finish.
General exterior maintenance where a flexible, paintable filler is essential.
Directions
Surface Preparation
Remove loose or flaking material, dirt, dust, oil, grease and chalky paint. Substrates must be sound.
Ensure surfaces are dry and free from visible moisture. Treat rust and stabilize friable areas as required.
For best mechanical key, lightly abrade glossy surfaces and remove dust.
Application
Open the tub and use directly. If the surface of the product begins to dry, add a few drops of water and re-mix gently. Keep the container tightly sealed when not in use.
Apply with a filling knife or trowel, pressing firmly to ensure full contact with the substrate.
Build up in thin layers for deep repairs, allowing each layer to firm before adding the next.
For a satin-smooth finish, tool the final pass with a wet knife or brush to reduce post-work finishing.
Finishing & Painting
Allow to dry fully. Dry time varies with film thickness, temperature and humidity.
Once dry, apply a suitable primer/undercoat if required by your paint system, then topcoat.
Use quality exterior paints for weather-exposed areas.
Clean-Up & Storage
Clean tools and splashes with water while wet.
Reseal immediately after use to minimise skinning and reduce waste.
Store upright with lid sealed. Do not allow contents to dry out.
Good to know
Formulation is unaffected by normal temperature swings and resists cracking with vibration.
Designed for exterior flexibility yet also suitable for interior touch-ups.
For best results on deep voids, fill in multiple light applications rather than one heavy pass.
Specifications
Brand
Earl’s
Product
MulTflex® Exterior Flexible Filler
Type
Single-pack, ready-to-use flexible filler & adhesive
Use
Interior / Exterior
Paintable
Yes, once fully dry
VOC Content
No VOCs (as supplied)
Shrink / Sink
Non-shrinking, non-sinking
Flexibility
Resists cracking with vibration and movement
Clean-Up
Water (while wet)
Substrates
Timber, masonry, render, plasterboard, metals, gutters, around pipes, glass
Finish
Satin-smooth when tooled with a wet knife or brush
Packaging
Ready-to-use tub
Country of Origin
100% Australian made & owned
Limitations
Do not apply to unsound, dusty or actively corroding surfaces without proper preparation.
Dry and cure times depend on depth and conditions; confirm dryness before painting.
Not intended for structural repairs.
Pro Tips
Feather edges wide for invisible paint blending on weathered timber and render.
Keep a small cup of clean water nearby to maintain a smooth final pass.
Deep cavities: bridge with successive thin layers for the most stable result.
Out Of Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Earl’s Powder Putty – Mix-to-Use Interior & Exterior Filler
Earl’s Powder Putty is a multi-purpose powder filler for professional and DIY repairs. Just add water, mix only what you need, and achieve a tough, easy-sand finish with no waste and no shrinking.
Brand: Earl’s
Interior and exterior use*
Mix-on-demand convenience
Non-shrinking, smooth finish
Easy sanding and shaping
Indefinite shelf life in dry powder form
Proudly made in Australia
*Exterior applications must be sealed/painted and used on stable substrates.
About Earl’s Powder Putty
Earl’s Powder Putty delivers reliable, high-quality filling for timber, walls, masonry and metal. Because it’s supplied as a dry powder, you can tailor the mix to your task—stiffer for knife-grade filling and sculpting, or looser for fine skim work. The result is a hardwearing repair that sands easily and accepts coatings beautifully.
Where Earl’s Powder Putty Works
Timber & woodwork: doors, frames, skirting, architraves, furniture, cabinetry
Walls & panels: plasterboard and cement sheeting patching and feathering
Masonry & concrete: chips, small holes and surface imperfections
Metals: minor dents and irregularities prior to priming and painting
Floor preparation: quick patching of distressed boards prior to covering
Craft & hobby: architectural details, mouldings and small sculpting tasks
Why Choose Earl’s
No shrink: Formulated to dry without shrinking for flush, invisible repairs.
Mix what you need: Reduce waste and always work with a fresh batch.
Shapes perfectly: Once dry, Earl’s Powder Putty can be cut, carved, sanded or sawn.
Paint-ready: Accepts primers and topcoats after proper dry and prep.
Economical & dependable: Indefinite shelf life in powder form when stored dry.
Directions for Earl’s Powder Putty
Surface prep: Ensure the area is clean, dry and sound. Remove loose material, dust, grease and contaminants. Key glossy surfaces for better adhesion.
Mix: In a clean container, add Earl’s Powder Putty and slowly incorporate clean water. Stir to a smooth, lump-free paste. Adjust water to suit the task.
Apply: Press the mix firmly into the repair with a putty knife or trowel. Slightly overfill to allow for sanding back flush.
Build: For deep repairs, apply in layers, allowing each to firm before adding the next.
Finish: Once dry, sand smooth. The cured filler can be carved or sawn to refine edges and profiles.
Coat: Prime/seal and paint after full dry. For exterior use, always seal with suitable coatings.
Clean-up: Clean tools with water while the product is still wet.
Dry and recoat times vary with temperature, humidity and film thickness. Allow extra time in cool or damp conditions and for deep fills.
Good to Know About Earl’s
Not waterproof by itself: Water and weather resistance requires sealing/painting.
Not flexible: Avoid use where movement, vibration or structural flexing is expected.
Stable substrates only: Ensure exterior bases are sound and well prepared.
Storage: Keep Earl’s Powder Putty dry and tightly closed. Moisture exposure can reduce performance after opening.
Safety: Avoid dust during mixing and sanding. Use PPE and adequate ventilation.
Typical Earl’s Applications
Filling nail and screw holes, chips and minor cracks
Skim patching and feathering edges prior to painting
Rebuilding small decorative profiles and mouldings
Levelling minor surface imperfections before finishing
Specifications
Brand
Earl’s
Product Name
Earl’s Powder Putty
Product Type
Multi-purpose powder filler
Format
Dry powder; mix with clean water
Colour (dry)
Off-white to white; paintable
Use Areas
Interior and exterior* (exterior must be sealed/painted; stable substrates only)
Substrate Compatibility
Wood, plasterboard, cement sheeting, concrete, masonry, properly prepared metal
Shrinkage
Non-shrinking when used as directed
Sandability
Easy sanding once fully dry
Paintability
Prime/seal and paint after full dry
Water Resistance
Requires sealing; product itself is not waterproof
Shelf Life (powder)
Indefinite when stored cool, dry and sealed
Clean-up
Water while wet
Tools
Putty knife, trowel, mixing stick or paddle, sanding block
Country of Origin
Australia
Limitations of Earl’s Powder Putty
Do not use as a flexible gap filler or where structural movement is expected.
Always prime/seal before exposure to moisture or exterior weather.
Deep repairs may require multiple layers with adequate drying between coats.
Not for permanently wet, submerged or high-movement joints.
FAQs – Earl’s Powder Putty
Can I mix a large batch and store it?Mix only what you can use within the working time. Discard any mix that begins to stiffen or set.
Can I screw or nail into it?For non-structural tasks, light fixings may be possible in sufficiently thick, fully cured areas. Pre-drill as needed and test first.
Is it paintable?Yes. Once dry and sanded, prime or seal the repair and finish with your chosen coating system.
Always follow label directions. Test on a small, inconspicuous area to confirm compatibility and finish.
Out Of Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Earl’s Wood Hardener — Restore Soft, Rotted Timber Like New
Bring weakened, decayed timber back to life with Earl’s Wood Hardener. This water-based consolidator penetrates deep into soft, rotted fibres and bonds them into a tough, stable base that’s ready for filling, sanding, and painting. Use it to save windowsills, frames, posts, decking boards, furniture, fences, and more—without costly tear-outs or replacements.
Why Customers Love It
Repairs instead of replacing: Restores soft, crumbly timber to near original strength so you can patch and repaint.
Water-based formulation: Low odour, no volatile organic compounds, and non-toxic when cured.
Ready to use: Pre-mixed; just shake and apply—no diluting or measuring.
Works inside and out: Ideal for interior and exterior timber exposed to weathering.
Versatile application: Pour, brush, spray, or syringe to saturate deep into affected areas.
Long shelf life: Stays usable for extended periods when stored correctly.
Proudly Australian made: Developed for local conditions and everyday DIY and trade use.
Where to Use
Window sills and sashes, door frames, posts, fences, balustrades, fascia boards, decking edges, outdoor furniture, indoor furniture, trims, mouldings—any non-structural timber showing soft rot or fibre breakdown.
How It Works
The thin, penetrating formula wicks into softened timber fibres. As it cures, it binds those fibres together to form a firm, stable base that can be filled, sanded, and coated. No need to carve out all the rot—thorough saturation does the heavy lifting.
Directions
Prep: Ensure the area is dry. Remove dirt, dust, grease, loose paint, varnish, and flaky wood. Mask adjacent finishes if needed.
Apply: Shake well. Generously pour, brush, spray, or syringe the hardener into the affected timber. Repeatedly saturate to drive product deep into fibres.
Cure: Allow to cure until solid and no longer tacky to the touch. Extremely soft timber may need multiple treatments.
Repair: Fill voids with a compatible wood filler, let set, then sand smooth.
Finish: Prime/seal and paint or coat as desired.
Pro Tip
For deep penetration around a localized patch of rot, mark approximately 75 mm either side of the soft area and drill small holes between those points. Brush, spray, or syringe the hardener into the holes until saturation is achieved.
Clean-Up & Safety
Clean tools and drips with water while wet.
Use above 7 °C and in well-ventilated areas.
Non-toxic when cured. Always follow label directions and keep out of reach of children.
Compatibility
Once cured, the hardened substrate accepts most timber fillers and putties. After filling and sanding, it can be primed and top-coated with typical timber paints and finishes. Always test on a small area for compatibility.
Limitations
Not for structural load-bearing repairs.
Not recommended for constant water immersion or areas that cannot be dried prior to application.
Timber must be reasonably sound after consolidation; heavily degraded material may require multiple treatments or replacement.
Specifications
Type
Water-based timber consolidant / hardener
Use
Restoring soft, rotted, non-structural timber prior to filling and painting
Appearance
Low viscosity liquid; dries clear/transparent
Odour / VOC
Low odour; no volatile organic compounds
Application Methods
Pour, brush, spray, or syringe to saturate fibres
Interior / Exterior
Suitable for both
Minimum Application Temperature
Above 7 °C
Cure Indicator
Ready for filling when firm and not tacky to the touch
Clean-Up
Water while wet
Shelf Life
In excess of 2 years when stored sealed in a cool, dry place
Substrates
Soft or rotted timber (non-structural), interior and exterior
Country of Manufacture
Australia
Packaging
Ready-to-use container
What’s in the Box
Earl’s Wood Hardener (ready to use)
Storage
Keep container tightly closed. Store upright in a cool, dry location away from freezing and direct heat. Do not allow product to dry out in the container.
Disposal
Allow residual product to cure before disposal. Follow local waste regulations.
Important Notes
Always read and follow the product label before use. Test on a discreet area to confirm adhesion and finish compatibility. The consolidated timber is not structural and should not be relied upon for load-bearing applications.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Introducing Eazy Tape Plasterboard Joint Tape, your ultimate solution for achieving flawless walls and durable repairs. Designed for both the DIY enthusiast and the professional, this self-adhesive fibreglass mesh tape is engineered to simplify your plasterboard wall panel joining or patching tasks. Crafted from high-strength fibreglass mesh, it ensures a robust bond that complements both plaster filler and jointing compounds seamlessly.
Why choose Eazy Tape? Here are the benefits:
Easy to Use: With its self-adhesive backing, the application is straightforward and mess-free, adhering securely to surfaces without the need for additional glues.
DIY-Friendly, Professional Results: Whether you're tackling a home project or a professional job, Eazy Tape guarantees a smooth, professional finish.
Strong Bonding & Holding Power: The superior fibreglass mesh material provides exceptional strength, reducing the risk of cracks and ensuring longevity.
Quick Results: Speed up your repair or construction projects with a tape that sets quickly, allowing you to move on to the next step without delay.
Perfect for a wide range of applications, from repairing cracks to joining new wall panels, Eazy Tape Plasterboard Joint Tape is the dependable choice for achieving seamless results with ease.
![Waxstix Timber repair wax touch-up crayons [Baltic Pine]](//gluesaustralia.com.au/cdn/shop/files/9315284510000.png?v=1754724098&width=645)
![Waxstix Timber repair wax touch-up crayons [Cedar]](//gluesaustralia.com.au/cdn/shop/files/9315284510017.png?v=1754724098&width=645)
![Waxstix Timber repair wax touch-up crayons [Baltic Pine]](http://gluesaustralia.com.au/cdn/shop/files/9315284510000.png?v=1754724098&width=645)
![Waxstix Timber repair wax touch-up crayons [Cedar]](http://gluesaustralia.com.au/cdn/shop/files/9315284510017.png?v=1754724098&width=645)
