In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Loctite Super Glue Longneck Bottle features a precision tip which allows controlled application without dripping, thus less mess. It has an easy-open cap with a metal pin that cleans and seals the nozzle for a clog-free performance. The long nozzle is ideal for gluing hard to reach surfaces. The ''finger friendly'' bottle keeps fingers glue free, as well as allows for a continuous flow or a precise drop of glue. It bonds a variety of materials including leather, ceramic, rubber, paper, metal, china, wood and most plastics. Loctite Super Glue Longneck Bottle dries clear and sets without clamping. Loctite Super Glue Longneck Bottle is resistant to moisture, most chemicals and freezing temperatures.
Recommended For
Bonding leather, cork, paper, cardboard, wood, chipboard, fabric, metal, ceramic, rubber and hard plastics such as Plexiglass™, polycarbonate, polystyrene and PVC
Repairing figurines, costume jewellery, cameras, toys, metal car parts, wiper blades, rubber seals and O-rings
Not Recommended For
Use in dishwasher, oven or microwave
Use on repairs needing high flexibility
Glazed surfaces
Exterior Applications
Styrofoam, foam rubber, pure bone china, glass, silicone rubber, PTFE, polyethylene and polypropylene
Safety Precautions
Apply in a well-ventilated area. Wear gloves and wash hands after use.
Preparation
Surfaces must be clean, dry and free from oil, wax and paint. Protect work area. Lightly roughen smooth surfaces for better adhesion. Pre-fit parts to be joined.
Application
Twist off the cap by turning counter-clockwise. Apply sparingly to one side only using approximately one drop per square inch of surface. Press surfaces together immediately. Hold in place for 15 to 30 seconds until bond sets. Do not reposition parts. Clean excess adhesive with tissue paper and replace the cap.
Cleanup
Cured adhesive may be cut away with caution using a sharp blade, acetone or with boiling water.
Sold Out
Express Post: 1-3 Days | Standard Post: 2-5 Days
Loctite Super Glue Professional in a bottle has proven superior performance over ordinary super glues. It works faster and holds stronger on more surfaces than ordinary instant adhesives thanks to a patented additive. Loctite Super Glue Professional's super strength formula is ideal for heavy-duty projects and repairs. It dries clear and sets without clamping. Loctite Super Glue Professional is resistant to moisture, most chemicals and freezing temperatures.
Recommended For:-Repairing figurines, costume jewellery, cameras, toys, metal car parts, wiper blades, rubber seals and O-rings-Bonding leather, cork, paper, cardboard, wood, chipboard, fabric, metal, ceramic, rubber and hard plastics such as Plexiglass, polycarbonate, polystyrene and PVC
Not Recommended For:-Styrofoam, foam rubber, pure bone china, glass, silicone rubber, PTFE, polyethylene and polypropylene-Use in dishwasher, oven or microwave-Use on repairs needing high flexibility-Glazed surfaces
Safety Precautions:Well-ventilated area, gloves.
Preparation:Surfaces must be clean, dry and free from oil, wax and paint. Protect work area. Lightly roughen smooth surfaces for better adhesion. Pre-fit parts to be joined.
Application:Twist off the cap by turning counter-clockwise. Apply sparingly to one side only using approximately one drop per square inch of surface. Press surfaces together immediately. Hold in place for 15 to 30 seconds until bond sets. Do not reposition parts. Clean excess adhesive with tissue paper and replace the cap.
Cleanup:Cured adhesive may be cut away with caution using a sharp blade, removed with Duro Super Glue Remover, acetone or with boiling water.
Sold Out
Express Post: 1-3 Days | Standard Post: 2-5 Days
Multi-use liquid super glue
Water-resistant, dishwasher, shock and temperature resistant
Bonds in seconds
Strength to withstand heavy loads
Dries transparent
Product Marketing
Has the handle of your favourite mug broken off? Are you looking for a strong glue to mend precious china? Look no further than Loctite Universal Super Glue!
This multi-purpose glue helps you to easily handle any kind of small daily repair job around the house! Providing instant strength, transparent drying technology, and an anti-clog cap, Loctite Universal ensures durable, long-lasting, and invisible repairs. This practical, transparent glue works on a variety of materials - from wood, rubber, plastic, and more - it even works as a leather glue. Thanks to its self-piercing anti-clog cap, the repair glue is super easy to use and does not dry out, ensuring long-term reusability. This instant glue not only withstands heavy loads but is also shock-resistant and serves as a waterproof and heatproof glue, proving reliable for a huge range of requirements and uses.
When ready to use ensure surfaces to be joined are clean, completely dry, and close-fitting. Twist cap clockwise until it locks, then unscrew in an anti-clockwise direction to open. Carefully squeeze a small drop onto one surface. Press the surfaces together and hold until set. Replace the cap immediately and store upright in a cool dry place.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Loctite Super Glue Professional in a bottle has proven superior performance over ordinary super glues. It works faster and holds stronger on more surfaces than ordinary instant adhesives thanks to a patented additive. Loctite Super Glue Professional's super strength formula is ideal for heavy-duty projects and repairs. It dries clear and sets without clamping. Loctite Super Glue Professional is resistant to moisture, most chemicals and freezing temperatures.
Recommended For:-Repairing figurines, costume jewellery, cameras, toys, metal car parts, wiper blades, rubber seals and O-rings-Bonding leather, cork, paper, cardboard, wood, chipboard, fabric, metal, ceramic, rubber and hard plastics such as Plexiglass, polycarbonate, polystyrene and PVC
Not Recommended For:-Styrofoam, foam rubber, pure bone china, glass, silicone rubber, PTFE, polyethylene and polypropylene-Use in dishwasher, oven or microwave-Use on repairs needing high flexibility-Glazed surfaces
Safety Precautions:Well-ventilated area, gloves.
Preparation:Surfaces must be clean, dry and free from oil, wax and paint. Protect work area. Lightly roughen smooth surfaces for better adhesion. Pre-fit parts to be joined.
Application:Twist off the cap by turning counter-clockwise. Apply sparingly to one side only using approximately one drop per square inch of surface. Press surfaces together immediately. Hold in place for 15 to 30 seconds until bond sets. Do not reposition parts. Clean excess adhesive with tissue paper and replace the cap.
Cleanup:Cured adhesive may be cut away with caution using a sharp blade, removed with Duro Super Glue Remover, acetone or with boiling water.
Sold Out
Express Post: 1-3 Days | Standard Post: 2-5 Days
General purpose, one-part silicone adhesive sealant which cures at room temperature to form a tough rubber seal.
LOCTITE® SI 593 is a black, general purpose, one-part silicone adhesive sealant which cures at room temperature to form a tough rubber seal. Will not slump in overhead or vertical applications. It has been formulated to withstand extreme temperature cycling, UV light, and ozone. It CANNOT be painted and is also available in clear and white.
General purpose
Forms a tough rubber seal
Will not slump in overhead or vertical applications
Withstands extreme temperature cycling, UV light, and ozone
Also available in clear or white
Technical Information
Colour Black
Cure Type Heat Cure
Full Cure Temperature 77 °F
Pot Life Temperature 77 °F
Shelf Life Temperature 5 °C
Shelf Life Time 213 day
Specific Gravity 1.84 g/l
Specific Gravity Temperature 25 °C
Technology Epoxy
Temperature -65 - 450 °F
Tg Dry 69 °C
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Loctite Vinyl, Fabric & Plastic Flexible Adhesive is a clear, single-part liquid glue made for mending rips, tears and splits in flexible materials. It dries to a transparent, waterproof bond that stays bendable, so repairs to vinyl, fabric and many plastics flex with the item instead of cracking, and the clear finish lets you avoid unsightly patches or tape.
Formula overviewThis is a polyurethane-based adhesive supplied as a clear, low-viscosity liquid in a 30ml (1 fl oz) squeeze tube. It cures by solvent release to a flexible solid that resists water once fully set. The bond will not go brittle with age, although prolonged exposure to sunlight can cause some yellowing over time.
Where to use itIndoors: vinyl upholstery and seat covers, cushions, raincoats and other wet-weather clothing, shoes, weather stripping, toys and general household items made from vinyl, fabric, leather and rubber.Outdoors: tarps, camping and outdoor gear, beach balls, inflatable mattresses and wading pools, wherever a waterproof and flexible repair is needed.
It bonds a wide range of substrates, including vinyl (PVC), fabric, leather, rubber, canvas, paper, wood, glass, metal, ceramic and many flexible plastics.
How to useWork in a well-ventilated area and make sure both surfaces are clean, dry and free of oil, grease, wax and paint. Lightly roughen very smooth surfaces so the glue can grip. Pierce the foil seal in the head of the tube using the reverse end of the cap.Small tears: apply along both edges of the damage, press together and hold with masking tape for around two hours.Larger tears: place a cloth or fibreglass patch behind the damaged area for extra strength, apply along the edges, then tape the repair for around two hours.Contact method: coat both surfaces, leave for 10 to 30 minutes until touch-dry, then bring the parts together within 30 minutes. Allow a full 24 hours of cure before exposing the repair to water. Wipe away wet excess before it sets, and trim cured residue carefully with a sharp blade.
Important notesDo not use on polyethylene (PE), polypropylene (PP), PTFE, PET, polystyrene foam board or polyformaldehyde.Do not use on rubberised or coated cotton, foam rubber, neoprene or urethane rubber.Not suitable for faux leather or leatherette.Not recommended where the repair will be exposed to temperatures above 60°C.Clean up uncured adhesive with acetone, following the solvent maker's precautions, as acetone can damage some plastics and is highly flammable.
Specifications
Brand
Loctite
Type
Polyurethane flexible repair adhesive
Size
30ml (1 fl oz)
Colour
Clear
Form
Liquid, carded squeeze tube
Density
0.820 to 0.900
Viscosity
2250 to 2750 cps
Open time
10 to 30 minutes
Full cure
24 hours
Application temperature
5°C to 30°C
Service temperature
Up to 60°C
Flash point
-9°C
VOC content
Up to 80.8 g/L (CARB)
Water resistance
Waterproof once cured
Shelf life
24 months unopened
Clean up
Acetone (uncured)
SafetyDanger: extremely flammable liquid and vapour, and the vapour can cause a flash fire. Contains methyl ethyl ketone. The vapour is harmful and may cause dizziness, headache or nausea and may affect the nervous system. The product is a skin sensitiser and can irritate the eyes, skin and respiratory tract. Use only in a well-ventilated area, keep away from heat, sparks and open flame, do not smoke while using it, and keep the container closed when not in use. Avoid contact with eyes and skin, wear nitrile gloves and wash thoroughly after handling.First aid: for eye contact, flush with water for 15 minutes and seek medical advice. For skin contact, wash with soap and water. If breathing is difficult, move to fresh air. If swallowed, do not induce vomiting and contact a doctor or the Poisons Information Centre immediately (Australia 13 11 26). Keep out of reach of children. Refer to the Safety Data Sheet for full handling, storage and disposal guidance.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Loxeal 58-11 Anaerobic Thread Sealant
Loxeal 58-11 is a high performance anaerobic sealant designed for metal thread joints only. It replaces PTFE tape and cord, delivers instant sealing against moderate pressure, and cures to form a shock and vibration resistant seal that remains reliable from -55°C to +150°C.
Why choose Loxeal 58-11
Instant sealing against moderate pressure to get systems back in service fast.
Thixotropic formulation stays where you put it and resists migration on threads.
Wide chemical compatibility including gas, water, LPG, hydrocarbons, oils and more.
Shock and vibration resistant for durable, leak free joints.
Temperature range from -55°C to +150°C for tough Australian conditions.
Certified and approved
Gas approvals: DVGW and DIN EN 751-1, plus Australian Gas Association for working pressure up to 20 bar.
Oxygen service: Approved for gaseous oxygen up to 10 bar at +60°C.
Potable water: WRAS listed and suitable for contact with wholesome water. Also approved for contact with drinking water by Global Mark.
Food area use: NSF registered category S4 for use as an adhesive in and around food processing areas.
Hydrogen: Tested by KIWA as a sealant for use with pure hydrogen to EN 751-1.
Typical applications
Sealing tapered and parallel metal threaded fittings in plumbing, HVAC, gas and hydraulic systems.
Replacing PTFE tape or thread cord on metal pipework where a permanent, pressure resistant seal is needed.
Directions
Clean and degrease threads thoroughly.
Cut the nozzle to the required bead size.
Apply a continuous bead 1 to 2 threads back from the leading edge. Ensure full coverage around the circumference.
Assemble and tighten the joint. Wipe away excess uncured material.
Allow to cure (see Cure times). Cure speed can be accelerated on passive metals or at low temperature with an appropriate activator.
Cure times at +25°C
Handling: 15 to 30 minutes
Functional: 1 to 3 hours
Time to water service for potable water systems at +21.1°C
Brass, copper, cast iron: 24 hours
Stainless steel, aluminium: 7 days
Technical data
Chemistry
Anaerobic methacrylate
Colour
Yellow (fluorescent under blue light)
Viscosity at +25°C
20,000 to 80,000 mPa·s, thixotropic
Specific gravity
Approx. 1.1 g/ml
Gap filling
Up to 0.30 mm (M56 / 2 inch)
Flash point
Greater than +100°C
Shear strength
6 to 13 N/mm² (ISO 10123)
Breakaway torque
18 to 24 N·m (ISO 10964)
Prevailing torque
7 to 14 N·m (ISO 10964)
Service temperature
-55°C to +150°C
Shelf life
1 year in unopened packaging at ? +25°C
Chemical resistance
Excellent resistance to motor oil, gearbox oil, gasoline and hydraulic oil. Excellent to good resistance in 50 percent water glycol at elevated temperature.
Limitations and notes
For metal to metal threaded joints only. Not suitable for plastic threads or rubber components.
Liquid product can attack some coatings and plastics. Pre test if unsure.
For disassembly, use normal tools. Heat components to approximately +150°C to +250°C if required, then remove cured residue mechanically and clean with solvent.
Store in a cool, dry place at or below +25°C. Do not return unused product to the bottle.
All technical information is provided as a guide only. Always verify suitability with your specific materials, operating pressures and local regulations before use. Follow all safety and handling instructions on the product label and safety data sheet.
Sold Out
Express Post: 1-3 Days | Standard Post: 2-5 Days
Multi-Purpose Cleaner and Deodorizer
Natural Minerals easily dissolve in water
Directions:
Test on an inconspicuous area first
Borax can be used in powder form for tea and coffee cup stains
General cleaning 1-table spoon to 4.5 Litres of warm water (also woollens and blankets)
Enamel surfaces 4 tablespoons to 4.5 Litres of warm water (refrigerators, stoves, sinks, baths & tiles
Uses: General cleaning, stain remover, deodorizer
Sold Out
Express Post: 1-3 Days | Standard Post: 2-5 Days
Directions:
- Use gloves before dispensing
- Washing Machines: empty machine, add 1 tablespoon of Descaling powder directly into the machine, not detergent dispenser. Run full cycle
- Dishwashers: remove all items from the machine, including all dishwashing detergents. Fill detergent dispenser with up to 2 tablespoons of Descaling powder and run for a full cycle.
- All-purpose cleaner: 1 tablespoon mix to 1 Litre hot water and soak items for up to 3 - 5 minutes, rinse the solution off in cold water
Uses: Can be used undiluted for heavy stains by simply adding power and rob directly onto affected area e.g. bathtubs, sinks and toilet bowls
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
The Premium Wet Area Sealant
Wet areas
Baths, showers, toilets
Easy to use
Contains strong fungicides to fight mould
Maxisil A Ceramic Silicone is an acetic cure silicone recommended for all ceramic tile areas, especially for expansion joints in bathrooms, kitchens, and flooring sectors.
Built-in fungicides for mould resistance
For both exterior and interior use
Excellent weatherability, resistant to ageing and UV radiation
Resistant to chemicals and temperature
Primerless adhesion to clean, dry surfaces such as ceramics, glass, acrylics, aluminium, and painted wood
Very good tooling and smoothing properties
Time-saving with an easy cleanup system
Please note that colour samples are not true to the actual colour. This is a guide only.
Characteristics
1-component acetate-curing silicone sealant
Excellent weathering, ageing, and UV resistance
Enables a great finish, will not string during application
Good tooling and smoothing properties
Contains fungicides
Medium skin formation time for easy handling
Very good adhesion on ceramic substrates
Primerless adhesion to many substrates
Stress expansion modulus at 100% (DIN 53 504, S3A): 0.3 N/mm²
Meets DIN 18545, part 2D (German industrial standard)
Available in a variety of colours (custom colours available upon request)
Fields of Application
Sealing connection joints between ceramic tiles, showers, baths, and flooring sections
Expansion/movement joints in bathrooms and wet areas
Connection joints on door and window frames
Sealing double-glazing joints
Glass block glazing
Sealing general building substrates
Suitable for interior and exterior use
Important Information
Before application, ensure materials in the contact area are compatible with the sealant and with each other to prevent damage or discoloration. If in doubt, consult the manufacturers of surrounding substrates.
While curing, small amounts of acetic acid are released — ensure good ventilation
After curing, the product is odourless and harmless
Thicker silicone layers require longer vulcanisation time
Not for full-surface bonding unless construction prerequisites are met
For layers over 15mm, contact our technical department
Avoid contact with bitumen-containing materials or those releasing solvents (e.g. butyl, EPDM, neoprene, bituminous paints)
When replacing mould-contaminated joints, remove all old sealant and treat areas with Maxisil Anti-Mildew Spray
Technical Properties
Skin-forming time (23°C / 50% RAH)
~ 15 min
Curing in 24h (23°C / 50% RAH)
~ 2–3 mm
Processing temperature
+5°C to +35°C
Viscosity (23°C)
Pasty, stable
Density (23°C, ISO 1183-1)
~ 1.0 g/cm³
Shore A hardness (ISO 868)
~ 20
Permissible movement capability
—
Sold Out
Express Post: 1-3 Days | Standard Post: 2-5 Days
This is a two-part, smooth, dark grey paste that cures to form a hard, durable polymer that is extremely thermally conductive, yet electrically insulating. It is it very viscous because it is highly filled with thermally conductive ceramic powders for maximum thermal conductivity. It bonds well to metals, ceramics, glass, and most plastics used in electronic assemblies.
It has a convenient 1-to-1 mix ratio and a 4-hour working life. The mixed adhesive can essentially act like a one-part adhesive for the duration of a work shift. Unlike one-part adhesives, it does not require high curing temperatures or frozen storage, and it has a very long shelf life.
This product comes packaged in separate 3 mL graduated syringes that can be accurately dispensed
Applications & Usages
This product is designed to bond heat sinks, LED’s, and other heat generating components in electronic assemblies. It is suitable for manufacturing, repair, and hobbyist sectors. Use it when a thixotropic adhesive paste with maximum thermal conductivity and a very long working life is required. For automatic dispensing applications, use the 8329TFS, which has a lower viscosity at the cost of slightly lower thermal conductivity.
Benefits and Features
• Thermal conductivity: 1.44 W/(m·K)
• 1:1 mix ratio by volume
• Working life: 4 hours
• Cure time 1 hour at 80°C or 96 hours at room temperature
• Room temperature storage
• Good adhesive strength
• Strong resistance to water, brine, acids, bases, and aliphatic hydrocarbons
Usage Parameters
Properties Value
Working Life a) 4 h
Full Cure @25 °C [77 °F] 96 h
Full Cure @80 °C [176 °F] 1 h
Properties Value
Constant Service -65 to 165 °C
Temperature [-85 to 329 °F]
Intermittent Temp. -70 to 200 °C
Limits b)
[-40 to 302 °F]
Storage Temperature 22 to 27 °C
of Unmixed Parts [72 to 81 °F]
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
The Monarch Mini Skeleton caulking gun is a smaller size caulking gun matched to the range of Monarch Mini sealant cartridges. This compact design provides easier access to tight spaces where conventional size guns find it difficult. Featuring an inbuilt cartridge opener, the mini caulking gun can open a cartridge safely without using a knife for quick & easy use.
FEATURES
Small, lightweight design
Inbuilt cartridge opener
Dripless
BENEFITS
Lightweight
Swivel head for easy storage
Comfortable design
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Monarch Mini Easy Nails Beige: The Compact, Quick-Grip Construction Adhesive
Features & Benefits
Fast grab for immediate adhesion
High bond strength secures various building materials
No sag, minimal vertical slip
Easy water clean-up
Suitable for timber, metal, ceramics, and masonry
Why Choose Monarch Mini Easy Nails Beige?
When it comes to small construction projects, Monarch Mini Easy Nails in Beige offers the perfect solution. Its compact design allows for easy application in tight spaces, especially when used with a Monarch Mini Compact Caulking Gun. Not only does it provide a strong bond, but it also allows for quick water clean-up, making it an essential choice for any DIY or professional project.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Monarch Mini Fill Sand Go™
MONARCH MINI® FILL SAND GO™ is an all in one solution to almost every DIY filling repair job. It’s a quick-dry, ready mixed, water-based formula that is suitable for small to medium cracks and holes in plasterboard & timber surfaces.
The innovative MONARCH MINI® FILL SAND GO™ is a 3 in 1 product solution that includes a filling blade applicator as well as an ingenious sanding tool with a reversible sanding sponge. This allows you to complete the filling repair from start to finish without the hassle of requiring extra tools.
FEATURES
Innovative 3 in 1 Solution
Filler, Applicator & Sanding Puck with Sponge All included
Suitable for Interior repairs on Plasterboard & Timber
BENEFITS
Quick Dry Formula
Ready to Use Multi-Purpose Filler
Paintable
Sandable
Low Shrinkage
UV Resistant
Low Odour
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Monarch Mini Roof & Gutter Clear Silicone: The Compact Caulking Solution
Product Overview
Designed for roofing and outdoor applications, the Monarch Mini is perfect for a variety of materials like metal, brick, galvanized iron, tiles, and aluminium.
Key Features & Benefits
Quick exposure to light running water
UV resistant for lasting outdoor use
Neutral cure, making it versatile and safe for different materials
Non-corrosive and AS 4020 approved
Compatible with Monarch Mini Compact Caulking Gun
Perfect For
Great for small projects where a full-size cartridge is not needed. Ideal for:
Repairing gutters
Fixing roofs
Mending downpipes
Tight spaces that traditional cartridges can't reach
Colors Available
Available in black and translucent versions for versatility in your projects.
How To Use
Best when used with a Monarch Mini Compact Caulking Gun to reach tight spaces. Always follow the safety guidelines as provided on the product label.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Monarch Mini Roof & Gutter Silicone is a neutral cure silicone sealant that is ideal for repairing or installing gutters, roofs, downpipes, skylights and more. It can also be used to install metal sheets in the roofing industry and various other building services.
With such versatility on offer it's no wonder this product's demand has soared so rapidly! What else would you want from your sealant? Well there are added features like its flexibility and resilience that make it perfect for all applications. You can count on Monarch Mini Roof & Gutter Silicone to stick around because of its long-lasting durability - don't wait until disaster strikes again when you could have had the protection you needed beforehand.
FEATURES
Premium quality 100% silicone
Non-corrosive
Neutral cure
AS 4020 approved
BENEFITS
Quick exposure to light running water
Suitable for use in all weather
UV resistant
Monarch Mini™ is an innovative range of sealants, fillers, adhesives and accessories for the sealant market. This range of products brings a much easier way to apply sealants or adhesives compared with using traditional products.
The Monarch Mini’s unique and compact sealant cartridge features a shorter length and a smaller diameter, making it easier to control and apply. Reaching into tight spaces where conventional caulking guns can’t, Monarch Mini’s lightweight and superior handling make it more practical and easy to use.
In addition to the Monarch Mini cartridge range are nozzles and caulking guns, which capitalise on the shorter cartridge and increase the places where it can be used. Filled with only premium quality materials, the Monarch Mini™ range is suited to both the DIY market and sections of the trade market, making Monarch Mini a very versatile option.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Monarch Mini Silicone is the sealant for your home. Especially useful in kitchens, bathrooms and laundries where sinks, baths, vanities and showers are installed and other outdoor patio areas, this durable polymer creates a waterproof barrier that'll stand up to wear-and-tear while resisting heat or cold when conditions change outside. A versatile property for any project you're working on!
Monarch Mini Silicone sealant is ideal for kitchens, bathrooms and laundries, where sinks, baths, vanities & showers are installed & for other outdoor uses. Available in a variety of colours.
FEATURES
Premium quality 100% silicone
Ideal for wet areas
Indoor and outdoor use
Maximum flexibility
BENEFITS
Proven to last in all weather
Mould resistant
Tack free in 10 minutes
Monarch Mini™ is an innovative range of sealants, fillers, adhesives and accessories for the sealant market. This range of products brings a much easier way to apply sealants or adhesives compared with using traditional products.
The Monarch Mini’s unique and compact sealant cartridge features a shorter length and a smaller diameter, making it easier to control and apply. Reaching into tight spaces where conventional caulking guns can’t, Monarch Mini’s lightweight and superior handling make it more practical and easy to use.
In addition to the Monarch Mini cartridge range are nozzles and caulking guns, which capitalise on the shorter cartridge and increase the places where it can be used. Filled with only premium quality materials, the Monarch Mini™ range is suited to both the DIY market and sections of the trade market, making Monarch Mini a very versatile option.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Monarch Mini Silicone is the sealant for your home. Especially useful in kitchens, bathrooms and laundries where sinks, baths, vanities and showers are installed and other outdoor patio areas, this durable polymer creates a waterproof barrier that'll stand up to wear-and-tear while resisting heat or cold when conditions change outside. A versatile property for any project you're working on!
Monarch Mini Silicone sealant is ideal for kitchens, bathrooms and laundries, where sinks, baths, vanities & showers are installed & for other outdoor uses. Available in a variety of colours.
FEATURES
Premium quality 100% silicone
Ideal for wet areas
Indoor and outdoor use
Maximum flexibility
BENEFITS
Proven to last in all weather
Mould resistant
Tack free in 10 minutes
Monarch Mini™ is an innovative range of sealants, fillers, adhesives and accessories for the sealant market. This range of products brings a much easier way to apply sealants or adhesives compared with using traditional products.
The Monarch Mini’s unique and compact sealant cartridge features a shorter length and a smaller diameter, making it easier to control and apply. Reaching into tight spaces where conventional caulking guns can’t, Monarch Mini’s lightweight and superior handling make it more practical and easy to use.
In addition to the Monarch Mini cartridge range are nozzles and caulking guns, which capitalise on the shorter cartridge and increase the places where it can be used. Filled with only premium quality materials, the Monarch Mini™ range is suited to both the DIY market and sections of the trade market, making Monarch Mini a very versatile option.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
The Monarch Mini Skeleton caulking gun is a smaller size caulking gun matched to the range of Monarch Mini sealant cartridges. This compact design provides easier access to tight spaces where conventional size guns find difficult. Featuring an inbuilt cartridge opener, the mini caulking gun can open a cartridge safely without using a knife for quick & easy use.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Nordsjö Professional Flexible Wood Filler repairs small cracks and holes in wood. As the name implies, it is a flexible filling for wood, great for interior and exterior use.
Suitable for all types of interior & exterior wood
Quick drying, easy to sand
Water resistant finish will not shrink, crack or crumble
Stainable and paintable
Properties
Ready for use
Excellent adhesion to all types of wood
Tough and durable fill that flexes with the natural movement of wood
Accepts nails and screws
Sandable and paintable after approx. 3 hours (1 cm layer at 20°C)
Must be overcoated when used outside (minimum 2 coats)
Paintable with all types of paint
Maximum layer thickness: 1 cm
Maximum depth: 2 cm
Colour: natural/pine
How to apply
Substrate must be clean, dry, dust and grease free.
Remove all loose material.
Mix the product well before use.
Product can be applied directly from the pot.
Apply filler firmly into the hole with a filling knife.
For a smooth result, finish with a damp filling knife.
For deeper repairs, build up in layers of 1cm, letting the product dry in between layers.
Once dry, sand the filler so it is even with the surface and dust off. Finish with a stain, varnish or paint. The filler may stain or varnish differently to the surrounding wood.
Clean tools with warm water.
Do not store or use below 5°C.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Nordsjö Professional Flexible Wood Filler repairs small cracks and holes in wood. As the name implies, it is a flexible filling for wood, great for interior and exterior use.
Suitable for all types of interior & exterior wood
Quick drying, easy to sand
Water resistant finish will not shrink, crack or crumble
Stainable and paintable
Properties
Ready for use
Excellent adhesion to all types of wood
Tough and durable fill that flexes with the natural movement of wood
Accepts nails and screws
Sandable and paintable after approx. 3 hours (1 cm layer at 20°C)
Must be overcoated when used outside (minimum 2 coats)
Paintable with all types of paint
Maximum layer thickness: 1 cm
Maximum depth: 2 cm
Colour: natural/pine
How to apply
Substrate must be clean, dry, dust and grease free.
Remove all loose material.
Mix the product well before use.
Product can be applied directly from the pot.
Apply filler firmly into the hole with a filling knife.
For a smooth result, finish with a damp filling knife.
For deeper repairs, build up in layers of 1cm, letting the product dry in between layers.
Once dry, sand the filler so it is even with the surface and dust off. Finish with a stain, varnish or paint. The filler may stain or varnish differently to the surrounding wood.
Clean tools with warm water.
Do not store or use below 5°C.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Nordsjö Professional Rapid Repair Filler quickly fills small cracks and holes, such as drill and nail holes. It adheres perfectly to stone, concrete, drywall, plaster and stucco.
For filling and repairing small cracks and holes, such as drill holes and nails
Excellent adhesion to plasterboard, wood, brick, concrete, fiber cement, drywall, plaster and render
Not for use on metal, plastic, PVC and damp surfaces
Suitable for interior & exterior use
Tools Needed
Sharp Knife
Fine Sandpaper
Properties
Ready to use
Rapid dry: sand and paint after 15 minutes (5 mm layer at 20°C) with all types of paint
Easy to sand
Will not shrink
Accepts nails and screws
Maximum layer thickness: 5 mm
Maximum depth: 5 mm
Must be painted over when used outside (minimum 2 coats)
Colour: White
How to apply
Substrate must be clean, dry, dust and grease free.
Remove all loose materials.
Mix the product well before use.
Press filler into crack with a filling knife, smoothing off with a wet filling knife.
For deeper repairs, build up in layers of 5 mm, letting the product dry in between layers.
Remove any excess filler and leave to dry.
Once dry sand lightly if required.
Clean tools and hands with warm water immediately after use.
Do not store or use below 5°C.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Nordsjö Professional Rapid Repair Filler quickly fills small cracks and holes, such as drill and nail holes. It adheres perfectly to stone, concrete, drywall, plaster and stucco.
For filling and repairing small cracks and holes, such as drill holes and nails
Excellent adhesion to plasterboard, wood, brick, concrete, fiber cement, drywall, plaster and render
Not for use on metal, plastic, PVC and damp surfaces
Suitable for interior & exterior use
Tools Needed
Sharp Knife
Fine Sandpaper
Properties
Ready to use
Rapid dry: sand and paint after 15 minutes (5 mm layer at 20°C) with all types of paint
Easy to sand
Will not shrink
Accepts nails and screws
Maximum layer thickness: 5 mm
Maximum depth: 5 mm
Must be painted over when used outside (minimum 2 coats)
Colour: White
How to apply
Substrate must be clean, dry, dust and grease free.
Remove all loose materials.
Mix the product well before use.
Press filler into crack with a filling knife, smoothing off with a wet filling knife.
For deeper repairs, build up in layers of 5 mm, letting the product dry in between layers.
Remove any excess filler and leave to dry.
Once dry sand lightly if required.
Clean tools and hands with warm water immediately after use.
Do not store or use below 5°C.
Sold Out
Express Post: 1-3 Days | Standard Post: 2-5 Days
Nordsjö Professional Super Filler is an ideal product for indoors and outdoors. Effortlessly fills holes up to 10 cm deep. Does not sag, also suitable for vertical and ceiling repairs. You are always assured of a premium result.
Fills cracks and holes up to 10cm in brick, stone, wood, fibre cement, render, concrete, polystyrene, plasterboard, plaster and stucco
Ideal for over-head applications (non-slump formula)
Excellent adhesion to all cementitious surfaces
Suitable for interior and exterior applications
Not suitable for use on damp surfaces
Tools Needed:
Filling Knife
Properties:
Ready to use
Will not shrink or sag
Easy to sand
Accepts nails and screws
Paintable after approx. 2 hours (5 cm layer at 20°C) with a water-based paint
Sandable after 24 hours
Accepts oil-based paints after 48 hours
Maximum layer thickness: 5 cm
Maximum depth: 10 cm
Colour: Light Grey
How to Apply:
Substrate must be clean, dry, dust and grease free.
Remove all loose material.
Mix well before use.
Product can be used directly from the pot.
Apply the product firmly in to the hole with a filling knife.
For a super smooth result, finish with a damp filling knife.
For holes deeper than 5 cm, apply in layers, with sufficient drying time between the layers.
Replace cover sheet after use and ensure lid is properly closed.
Once dry sand to a smooth nish.
Clean tools with warm water immediately after use.
Do not store or use under 5°C.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Nordsjö Professional Super Filler is an ideal product for indoors and outdoors. Effortlessly fills holes up to 10 cm deep. Does not sag, also suitable for vertical and ceiling repairs. You are always assured of a premium result.
Fills cracks and holes up to 10cm in brick, stone, wood, fibre cement, render, concrete, polystyrene, plasterboard, plaster and stucco
Ideal for over-head applications (non-slump formula)
Excellent adhesion to all cementitious surfaces
Suitable for interior and exterior applications
Not suitable for use on damp surfaces
Tools Needed:
Filling Knife
Properties:
Ready to use
Will not shrink or sag
Easy to sand
Accepts nails and screws
Paintable after approx. 2 hours (5 cm layer at 20°C) with a water-based paint
Sandable after 24 hours
Accepts oil-based paints after 48 hours
Maximum layer thickness: 5 cm
Maximum depth: 10 cm
Colour: Light Grey
How to Apply:
Substrate must be clean, dry, dust and grease free.
Remove all loose material.
Mix well before use.
Product can be used directly from the pot.
Apply the product firmly in to the hole with a filling knife.
For a super smooth result, finish with a damp filling knife.
For holes deeper than 5 cm, apply in layers, with sufficient drying time between the layers.
Replace cover sheet after use and ensure lid is properly closed.
Once dry sand to a smooth nish.
Clean tools with warm water immediately after use.
Do not store or use under 5°C.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Nordsjö Professional Super Filler is an ideal product for indoors and outdoors. Effortlessly fills holes up to 10 cm deep. Does not sag, also suitable for vertical and ceiling repairs. You are always assured of a premium result.
Fills cracks and holes up to 10cm in brick, stone, wood, fibre cement, render, concrete, polystyrene, plasterboard, plaster and stucco
Ideal for over-head applications (non-slump formula)
Excellent adhesion to all cementitious surfaces
Suitable for interior and exterior applications
Not suitable for use on damp surfaces
Tools Needed:
Filling Knife
Properties:
Ready to use
Will not shrink or sag
Easy to sand
Accepts nails and screws
Paintable after approx. 2 hours (5 cm layer at 20°C) with a water-based paint
Sandable after 24 hours
Accepts oil-based paints after 48 hours
Maximum layer thickness: 5 cm
Maximum depth: 10 cm
Colour: Light Grey
How to Apply:
Substrate must be clean, dry, dust and grease free.
Remove all loose material.
Mix well before use.
Product can be used directly from the pot.
Apply the product firmly in to the hole with a filling knife.
For a super smooth result, finish with a damp filling knife.
For holes deeper than 5 cm, apply in layers, with sufficient drying time between the layers.
Replace cover sheet after use and ensure lid is properly closed.
Once dry sand to a smooth nish.
Clean tools with warm water immediately after use.
Do not store or use under 5°C.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Nordsjö Professional Super Filler is an ideal product for indoors and outdoors. Effortlessly fills holes up to 10 cm deep. Does not sag, also suitable for vertical and ceiling repairs. You are always assured of a premium result.
Fills cracks and holes up to 10cm in brick, stone, wood, fibre cement, render, concrete, polystyrene, plasterboard, plaster and stucco
Ideal for over-head applications (non-slump formula)
Excellent adhesion to all cementitious surfaces
Suitable for interior and exterior applications
Not suitable for use on damp surfaces
Tools Needed:
Filling Knife
Properties:
Ready to use
Will not shrink or sag
Easy to sand
Accepts nails and screws
Paintable after approx. 2 hours (5 cm layer at 20°C) with a water-based paint
Sandable after 24 hours
Accepts oil-based paints after 48 hours
Maximum layer thickness: 5 cm
Maximum depth: 10 cm
Colour: Light Grey
How to Apply:
Substrate must be clean, dry, dust and grease free.
Remove all loose material.
Mix well before use.
Product can be used directly from the pot.
Apply the product firmly in to the hole with a filling knife.
For a super smooth result, finish with a damp filling knife.
For holes deeper than 5 cm, apply in layers, with sufficient drying time between the layers.
Replace cover sheet after use and ensure lid is properly closed.
Once dry sand to a smooth nish.
Clean tools with warm water immediately after use.
Do not store or use under 5°C.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Nordsjö Professional Light and Smooth Super Filler, fills without the need for sanding. Thanks to our unique lightweight technology, our Light and Smooth filler immediately gives you a smooth finish. It does not sag and is easy to model, making it ideal for ceilings and walls.
High performance extra lightweight filler for all general interior and exterior repairs
Fills deep cracks and holes up to 10cm in plasterboard, wood, fiber cement, concrete, brick and most other common building materials
Ideal for over-head applications (non-slump formula)
Properties
Ready to use
Will not shrink or sag
Super smooth finish – no sanding required
Paintable with all types of paint
Maximum layer thickness: 5 cm
Maximum depth: 10 cm
Easy to apply and shape
Quick drying: paint after approx. 2 hours (5 cm layer at 20°C) with water-based paints
How to apply
Substrate must be clean, dry, dust and grease free.
Remove all loose materials.
Before application, metal surfaces such as nails and screws should be treated with an appropriate rust resistant primer.
Stir into a smooth paste (if the filler is too dry, just add a few drops of water).
Press filler into hole with a filling knife, smoothing off with a wet filling knife.
For holes deeper than 5 cm, apply in layers, with sufficient drying time between the layers.
No sanding is required. If sanding, wait for 24 hours.
If painting over with an oil-based finish, wait 14 days.
Must be painted over when used outside (minimum 2 coats).
Colour: White.
Not suitable for drilling.
Clean tools and hands immediately after use with warm water.
Do not store or use below 5 ° C.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Nordsjö Professional Light and Smooth Super Filler, fills without the need for sanding. Thanks to our unique lightweight technology, our Light and Smooth filler immediately gives you a smooth finish. It does not sag and is easy to model, making it ideal for ceilings and walls.
High performance extra lightweight filler for all general interior and exterior repairs
Fills deep cracks and holes up to 10cm in plasterboard, wood, fiber cement, concrete, brick and most other common building materials
Ideal for over-head applications (non-slump formula)
Properties
Ready to use
Will not shrink or sag
Super smooth finish – no sanding required
Paintable with all types of paint
Maximum layer thickness: 5 cm
Maximum depth: 10 cm
Easy to apply and shape
Quick drying: paint after approx. 2 hours (5 cm layer at 20°C) with water-based paints
How to apply
Substrate must be clean, dry, dust and grease free.
Remove all loose materials.
Before application, metal surfaces such as nails and screws should be treated with an appropriate rust resistant primer.
Stir into a smooth paste (if the filler is too dry, just add a few drops of water).
Press filler into hole with a filling knife, smoothing off with a wet filling knife.
For holes deeper than 5 cm, apply in layers, with sufficient drying time between the layers.
No sanding is required. If sanding, wait for 24 hours.
If painting over with an oil-based finish, wait 14 days.
Must be painted over when used outside (minimum 2 coats).
Colour: White.
Not suitable for drilling.
Clean tools and hands immediately after use with warm water.
Do not store or use below 5 ° C.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Nordsjö Professional Light and Smooth Super Filler, fills without the need for sanding. Thanks to our unique lightweight technology, our Light and Smooth filler immediately gives you a smooth finish. It does not sag and is easy to model, making it ideal for ceilings and walls.
High performance extra lightweight filler for all general interior and exterior repairs
Fills deep cracks and holes up to 10cm in plasterboard, wood, fiber cement, concrete, brick and most other common building materials
Ideal for over-head applications (non-slump formula)
Properties
Ready to use
Will not shrink or sag
Super smooth finish – no sanding required
Paintable with all types of paint
Maximum layer thickness: 5 cm
Maximum depth: 10 cm
Easy to apply and shape
Quick drying: paint after approx. 2 hours (5 cm layer at 20°C) with water-based paints
How to apply
Substrate must be clean, dry, dust and grease free.
Remove all loose materials.
Before application, metal surfaces such as nails and screws should be treated with an appropriate rust resistant primer.
Stir into a smooth paste (if the filler is too dry, just add a few drops of water).
Press filler into hole with a filling knife, smoothing off with a wet filling knife.
For holes deeper than 5 cm, apply in layers, with sufficient drying time between the layers.
No sanding is required. If sanding, wait for 24 hours.
If painting over with an oil-based finish, wait 14 days.
Must be painted over when used outside (minimum 2 coats).
Colour: White.
Not suitable for drilling.
Clean tools and hands immediately after use with warm water.
Do not store or use below 5 ° C.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Nordsjö Professional Fine Filler is an indoor super smooth filler for primed new wood or previously painted clean wooden surfaces and or concrete walls and ceilings. It is ideal for fixing minor imperfections on painted surfaces before repainting. On wood, it is ideal for cracks and joints.
For use on interior walls and joinery, including doors, windows, trim, architraves and skirting boards
Fill fine cracks up to 2mm, minor blemishes or wood grain for a professional, glass smooth surface for painting
Properties
Ready to use
Sand & paint after 4 hours
Super smooth white finish
Easy to sand
Maximum depth: 2 mm
Particle size: Max 0.10 mm
How to apply
Substrate and crack must be clean, dry and free from loose material.
New wood should be primed first.
Rub down gloss surfaces for improved adhesion.
Metal surfaces such as nails and screws should be treated with an appropriate rust resistant primer.
Apply with a filling knife and spread over the surface, pressing in well.
Remove any excess filler and leave to dry.
For an even smoother finish rub down with fine sand paper.
Use appropriate protection when sanding.
Do not apply when the surface temperature is below + 5°C.
Replace lid after use.
Wash tools with warm water.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Nordsjö Professional Fine Filler is an indoor super smooth filler for primed new wood or previously painted clean wooden surfaces and or concrete walls and ceilings. It is ideal for fixing minor imperfections on painted surfaces before repainting. On wood, it is ideal for cracks and joints.
For use on interior walls and joinery, including doors, windows, trim, architraves and skirting boards
Fill fine cracks up to 2mm, minor blemishes or wood grain for a professional, glass smooth surface for painting
Properties
Ready to use
Sand & paint after 4 hours
Super smooth white finish
Easy to sand
Maximum depth: 2 mm
Particle size: Max 0.10 mm
How to apply
Substrate and crack must be clean, dry and free from loose material.
New wood should be primed first.
Rub down gloss surfaces for improved adhesion.
Metal surfaces such as nails and screws should be treated with an appropriate rust resistant primer.
Apply with a filling knife and spread over the surface, pressing in well.
Remove any excess filler and leave to dry.
For an even smoother finish rub down with fine sand paper.
Use appropriate protection when sanding.
Do not apply when the surface temperature is below + 5°C.
Replace lid after use.
Wash tools with warm water.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Nordsjö Professional Fine Filler is an indoor super smooth filler for primed new wood or previously painted clean wooden surfaces and or concrete walls and ceilings. It is ideal for fixing minor imperfections on painted surfaces before repainting. On wood, it is ideal for cracks and joints.
For use on interior walls and joinery, including doors, windows, trim, architraves and skirting boards
Fill fine cracks up to 2mm, minor blemishes or wood grain for a professional, glass smooth surface for painting
Properties
Ready to use
Sand & paint after 4 hours
Super smooth white finish
Easy to sand
Maximum depth: 2 mm
Particle size: Max 0.10 mm
How to apply
Substrate and crack must be clean, dry and free from loose material.
New wood should be primed first.
Rub down gloss surfaces for improved adhesion.
Metal surfaces such as nails and screws should be treated with an appropriate rust resistant primer.
Apply with a filling knife and spread over the surface, pressing in well.
Remove any excess filler and leave to dry.
For an even smoother finish rub down with fine sand paper.
Use appropriate protection when sanding.
Do not apply when the surface temperature is below + 5°C.
Replace lid after use.
Wash tools with warm water.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
The product that started it all. Original Gorilla Glue built a name for itself with its incredible, industrial holding power and versatility. Water activated, it expands into materials to form an incredibly strong bond to virtually anything. Gorilla Glue is your solution for almost any project or repair. It’s 100% waterproof, safe for indoor and outdoor use and strong enough to stand up to the elements. Plus, its expansion allows it to penetrate the glued surface for a superior bond. Sand it, paint it, stain it. Simply stated, it’s the Toughest Glue on Planet Earth.
Directions:
Prepare and Dampen the Surfaces
If you’re using Original Gorilla Glue for the first time, or bonding a new type of material, we always recommend trying a test piece first.
Prepare your surfaces: All surfaces must be clean, dust free and tight fitting. For shiny surfaces, such as metals, glass and some plastics, roughen up the material to give the glue something to bite into.
Damp It: Lightly dampen one surface with water. We recommend using a damp cloth or spraying with water. Do not saturate the surface. For dense hardwoods, lightly dampen both surfaces prior to gluing.
Evenly Apply Gorilla Glue Onto the Dry Surface
Glue It: Carefully apply onto the dry surface. Do not over apply. We recommend wearing gloves or spreading the glue with a disposable brush. In some instances, Gorilla Glue can be a skin sensitizer. If you are predisposed to skin reactions, please take the extra precaution.
If you do get the glue on your skin, try removing it with a dry cloth or paper towel first (particularly if the glue is still tacky). If that doesn’t work, try washing with soap and cold water, or using an exfoliator with a gritty texture. Dry your skin and apply lotion. We do not recommend using any kind of alcohol or acetone. This actually strips the skin of its natural oils, which means the glue is more likely to stick.
Clamp the Two Surfaces Together Tightly
Clamp It: Make sure the clamping pressure is distributed evenly across the surface. Or, if you don’t have a clamp, use heavy objects or Gorilla Tape® to achieve the appropriate clamping pressure. For lighter objects, try using rubber bands to hold the pieces together tightly. Clamp objects for 1–2 hours. For best results, allow 24 hours to cure.
Clean up
If you need to remove any uncured “squeeze out” or wet glue, we recommend wiping with a dry cloth or using a standard paint thinner. Make sure to read and follow directions if using a paint thinner. Always wear gloves. Once the glue is dry, it is best removed mechanically: Try sanding, chiselling, scraping or picking. The dried glue will not damage tools.
Storage Tips
After each use, wipe the bottle’s lid and nozzle clean with a dry cloth. For 2 oz. bottles, tightly replace the lid after wiping clean and store in a cool, dry place. For bottle sizes 4 oz. and larger, we suggest squeezing excess air out of the bottle. While still squeezing, tightly replace the cap and then store in a cool, dry place. This helps eliminate moisture in the bottle. You should expect a year shelf life.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
The product that started it all. Original Gorilla Glue built a name for itself with its incredible, industrial holding power and versatility. Water activated, it expands into materials to form an incredibly strong bond to virtually anything. Gorilla Glue is your solution for almost any project or repair. It’s 100% waterproof, safe for indoor and outdoor use and strong enough to stand up to the elements. Plus, its expansion allows it to penetrate the glued surface for a superior bond. Sand it, paint it, stain it. Simply stated, it’s the Toughest Glue on Planet Earth.
Directions:
Prepare and Dampen the Surfaces
If you’re using Original Gorilla Glue for the first time, or bonding a new type of material, we always recommend trying a test piece first.
Prepare your surfaces: All surfaces must be clean, dust free and tight fitting. For shiny surfaces, such as metals, glass and some plastics, roughen up the material to give the glue something to bite into.
Damp It: Lightly dampen one surface with water. We recommend using a damp cloth or spraying with water. Do not saturate the surface. For dense hardwoods, lightly dampen both surfaces prior to gluing.
Evenly Apply Gorilla Glue Onto the Dry Surface
Glue It: Carefully apply onto the dry surface. Do not over apply. We recommend wearing gloves or spreading the glue with a disposable brush. In some instances, Gorilla Glue can be a skin sensitizer. If you are predisposed to skin reactions, please take the extra precaution.
If you do get the glue on your skin, try removing it with a dry cloth or paper towel first (particularly if the glue is still tacky). If that doesn’t work, try washing with soap and cold water, or using an exfoliator with a gritty texture. Dry your skin and apply lotion. We do not recommend using any kind of alcohol or acetone. This actually strips the skin of its natural oils, which means the glue is more likely to stick.
Clamp the Two Surfaces Together Tightly
Clamp It: Make sure the clamping pressure is distributed evenly across the surface. Or, if you don’t have a clamp, use heavy objects or Gorilla Tape® to achieve the appropriate clamping pressure. For lighter objects, try using rubber bands to hold the pieces together tightly. Clamp objects for 1–2 hours. For best results, allow 24 hours to cure.
Clean up
If you need to remove any uncured “squeeze out” or wet glue, we recommend wiping with a dry cloth or using a standard paint thinner. Make sure to read and follow directions if using a paint thinner. Always wear gloves. Once the glue is dry, it is best removed mechanically: Try sanding, chiselling, scraping or picking. The dried glue will not damage tools.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Ozito 1800W 2030PSI High Pressure Washer
The Ozito 1800W 2030PSI High Pressure Washer is a powerful and reliable tool designed to make cleaning outdoor surfaces quick and effortless. With its 1800W motor and 2030 PSI pressure, it efficiently removes dirt, grime, moss, and stains from driveways, patios, vehicles, and outdoor furniture. Its compact design and convenient hose storage make it easy to use and store, providing homeowners with a professional-quality cleaning solution for everyday maintenance tasks.
Key Features
1800W Powerful Motor: Delivers consistent and strong cleaning performance for tough outdoor tasks.
2030 PSI Maximum Pressure: Removes stubborn dirt, grime, and moss efficiently, leaving surfaces spotless.
Compact and Portable Design: Lightweight and easy to move around the yard or driveway, making it convenient for everyday use.
Quick-Connect Hose System: Allows fast and secure attachment of hoses and accessories for versatile cleaning applications.
Durable Construction: Built with quality materials for long-lasting performance and reliability.
Benefits
Provides professional-level cleaning power for driveways, patios, vehicles, and outdoor furniture.
Compact and portable design makes it easy to use and store without hassle.
Quick-connect system saves time when attaching hoses or switching accessories.
Efficiently removes stubborn dirt and grime, reducing the effort needed for outdoor cleaning.
Durable build ensures long-term reliability and consistent performance.
Technical Specifications
Power Source: 1800W AC electricity
Maximum Pressure: 2030 PSI
Flow Rate: Efficient water delivery for thorough cleaning
Design: Compact and portable with convenient hose storage
Nozzle System: Quick-connect for versatile cleaning applications
Application: Driveways, patios, vehicles, outdoor furniture, and general cleaning
Construction: Durable and built for regular use
The Ozito 1800W 2030PSI High Pressure Washer is an ideal choice for homeowners seeking a powerful, easy-to-use, and reliable tool to keep outdoor areas clean and well-maintained. Its professional-level performance and convenient design make outdoor cleaning fast, efficient, and hassle-free.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Ozito 2400W Corded 3 in 1 Blower Vacuum and Mulcher BLV-2401
The Ozito 2400W Corded 3 in 1 Blower Vacuum and Mulcher BLV-2401 is a versatile outdoor cleaning tool designed to make garden maintenance quick and efficient. Combining blower, vacuum, and mulching functions in one unit, it is perfect for clearing leaves, debris, and grass clippings from your yard. With its powerful 2400W motor, this corded tool delivers consistent performance for tough outdoor cleaning tasks while remaining easy to use and maneuver.
Key Features
Three-in-One Functionality: Easily switches between blower, vacuum, and mulcher modes for complete garden maintenance.
Powerful 2400W Motor: Delivers strong airflow to efficiently move leaves and debris, or vacuum and mulch garden waste.
Mulching Capability: Reduces leaves and debris by up to 10:1, making disposal easier and supporting composting.
Ergonomic and Lightweight Design: Comfortable to hold and maneuver, reducing fatigue during extended use.
Easy Assembly and Operation: Quick to switch between modes with simple controls, making it user-friendly for all homeowners.
Durable Construction: Built from high-quality materials to withstand regular outdoor use.
Benefits
Clears leaves, grass clippings, and debris quickly, saving time and effort in garden maintenance.
Three-in-one functionality eliminates the need for multiple tools, making storage and handling simpler.
Mulching feature reduces waste volume and provides material suitable for composting.
Lightweight and ergonomic design ensures comfortable operation for longer periods.
Powerful motor ensures consistent performance on tough garden tasks.
Durable construction ensures the tool lasts for many seasons of use.
Technical Specifications
Power Source: Corded electric
Motor Power: 2400W
Functions: Blower, vacuum, and mulcher
Airflow: Strong and consistent for effective cleaning
Mulching Ratio: Up to 10:1 reduction of leaves and debris
Design: Lightweight and ergonomic for ease of use
Application: Yards, gardens, patios, and outdoor areas
Construction: Durable materials for long-lasting outdoor performance
The Ozito 2400W Corded 3 in 1 Blower Vacuum and Mulcher BLV-2401 is the perfect tool for homeowners looking for a reliable, versatile, and easy-to-use garden cleaning solution. Its powerful motor, combined with blower, vacuum, and mulching capabilities, makes maintaining a tidy and healthy garden effortless.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Ozito 240V 440L/min Flow High Volume Air Pump
The Ozito 240V 440L/min Flow High Volume Air Pump is a powerful and reliable tool designed to quickly inflate air mattresses, pool toys, inflatable boats, and other large inflatables. With its high flow rate of 440 litres per minute, it saves time and effort, providing fast and efficient inflation for home, outdoor, and recreational use. Its durable construction and easy-to-use design make it a convenient and essential tool for any household or recreational activity.
Key Features
High Flow Rate: Delivers 440 litres per minute for rapid inflation of large items.
240V Electric Power: Plugs directly into standard power outlets for consistent and reliable performance.
Multiple Nozzle Adapters: Includes various nozzle sizes to fit a wide range of inflatables.
Compact and Portable Design: Lightweight and easy to move or store when not in use.
Durable Construction: Built to handle repeated use and provide long-lasting performance.
Benefits
Quickly inflates air mattresses, pool toys, inflatable boats, and other inflatables, saving time and effort.
Reliable 240V power ensures consistent performance for all inflation tasks.
Multiple nozzles provide versatility to fit various inflatables with different valve sizes.
Compact and lightweight design allows easy transport and storage.
Durable construction ensures long-lasting performance for repeated use.
Technical Specifications
Power Source: 240V AC electricity
Maximum Flow Rate: 440 litres per minute
Design: Compact and portable
Nozzle Adapters: Multiple sizes included for versatile use
Application: Inflating air mattresses, pool toys, inflatable boats, and other inflatables
Construction: Durable materials for long-lasting performance
The Ozito 240V 440L/min Flow High Volume Air Pump is an essential tool for households and recreational enthusiasts who need fast, reliable, and convenient inflation for a wide range of inflatable items. Its high flow rate and versatile nozzle options make it efficient and user-friendly for every task.
![MaxisiL A Silicone Sealant [Colour: A28 Brown]](//gluesaustralia.com.au/cdn/shop/files/693_720.jpg?v=1754724110&width=645)
![MaxisiL A Silicone Sealant [Colour: A29 Havana]](//gluesaustralia.com.au/cdn/shop/files/9326816000715.jpg?v=1754724111&width=645)
![Monarch Mini Gap Filler [Black]](//gluesaustralia.com.au/cdn/shop/files/9320090030567_dd3b7bac-a9e5-4986-9275-2bff35fb52de.jpg?v=1754712316&width=645)
![Monarch Mini Gap Filler [Brown]](//gluesaustralia.com.au/cdn/shop/files/9320090030574_91b63521-91d4-427c-ba6f-c5f54343a9c6.jpg?v=1754712314&width=645)
![Monarch Mini Gap Filler [Cream]](//gluesaustralia.com.au/cdn/shop/files/9320090030581_c5a95353-e7ee-4d92-8445-93066291f976.jpg?v=1754712313&width=645)
![Monarch Mini Gap Filler [White]](//gluesaustralia.com.au/cdn/shop/files/9320090029080_1b178ddb-e3de-4ec1-83bb-8e320595bdb3.jpg?v=1754712311&width=645)
![Monarch Mini Roof and Gutter Silicone [Black]](//gluesaustralia.com.au/cdn/shop/files/9320090029257_ad8c4dd8-7138-4341-881e-1e58084dc0c8.png?v=1754716023&width=645)
![Monarch Mini Roof and Gutter Silicone [Black]](//gluesaustralia.com.au/cdn/shop/files/9320090029257_d1f88907-d8a6-4e7f-b887-a4ac4f2ab20a.png?v=1754716023&width=645)
![Monarch Mini Silicone Mould Resistant [Translucent]](//gluesaustralia.com.au/cdn/shop/files/9320090029073_9b2a79dd-e58b-4fb6-a3b1-d6525871d967.png?v=1754712303&width=645)
![Monarch Mini Silicone Mould Resistant [White]](//gluesaustralia.com.au/cdn/shop/files/9320090029066_2af7d350-636b-476c-9c8a-71b4ddb4f0e5.png?v=1754712301&width=645)
![MaxisiL A Silicone Sealant [Colour: A28 Brown]](http://gluesaustralia.com.au/cdn/shop/files/693_720.jpg?v=1754724110&width=645)
![MaxisiL A Silicone Sealant [Colour: A29 Havana]](http://gluesaustralia.com.au/cdn/shop/files/9326816000715.jpg?v=1754724111&width=645)
![Monarch Mini Gap Filler [Black]](http://gluesaustralia.com.au/cdn/shop/files/9320090030567_dd3b7bac-a9e5-4986-9275-2bff35fb52de.jpg?v=1754712316&width=645)
![Monarch Mini Gap Filler [Brown]](http://gluesaustralia.com.au/cdn/shop/files/9320090030574_91b63521-91d4-427c-ba6f-c5f54343a9c6.jpg?v=1754712314&width=645)
![Monarch Mini Gap Filler [Cream]](http://gluesaustralia.com.au/cdn/shop/files/9320090030581_c5a95353-e7ee-4d92-8445-93066291f976.jpg?v=1754712313&width=645)
![Monarch Mini Gap Filler [White]](http://gluesaustralia.com.au/cdn/shop/files/9320090029080_1b178ddb-e3de-4ec1-83bb-8e320595bdb3.jpg?v=1754712311&width=645)
![Monarch Mini Roof and Gutter Silicone [Black]](http://gluesaustralia.com.au/cdn/shop/files/9320090029257_ad8c4dd8-7138-4341-881e-1e58084dc0c8.png?v=1754716023&width=645)
![Monarch Mini Roof and Gutter Silicone [Black]](http://gluesaustralia.com.au/cdn/shop/files/9320090029257_d1f88907-d8a6-4e7f-b887-a4ac4f2ab20a.png?v=1754716023&width=645)
![Monarch Mini Silicone Mould Resistant [Translucent]](http://gluesaustralia.com.au/cdn/shop/files/9320090029073_9b2a79dd-e58b-4fb6-a3b1-d6525871d967.png?v=1754712303&width=645)
![Monarch Mini Silicone Mould Resistant [White]](http://gluesaustralia.com.au/cdn/shop/files/9320090029066_2af7d350-636b-476c-9c8a-71b4ddb4f0e5.png?v=1754712301&width=645)
