In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Loctite Super Glue Professional in a bottle has proven superior performance over ordinary super glues. It works faster and holds stronger on more surfaces than ordinary instant adhesives thanks to a patented additive. Loctite Super Glue Professional's super strength formula is ideal for heavy-duty projects and repairs. It dries clear and sets without clamping. Loctite Super Glue Professional is resistant to moisture, most chemicals and freezing temperatures.
Recommended For:-Repairing figurines, costume jewellery, cameras, toys, metal car parts, wiper blades, rubber seals and O-rings-Bonding leather, cork, paper, cardboard, wood, chipboard, fabric, metal, ceramic, rubber and hard plastics such as Plexiglass, polycarbonate, polystyrene and PVC
Not Recommended For:-Styrofoam, foam rubber, pure bone china, glass, silicone rubber, PTFE, polyethylene and polypropylene-Use in dishwasher, oven or microwave-Use on repairs needing high flexibility-Glazed surfaces
Safety Precautions:Well-ventilated area, gloves.
Preparation:Surfaces must be clean, dry and free from oil, wax and paint. Protect work area. Lightly roughen smooth surfaces for better adhesion. Pre-fit parts to be joined.
Application:Twist off the cap by turning counter-clockwise. Apply sparingly to one side only using approximately one drop per square inch of surface. Press surfaces together immediately. Hold in place for 15 to 30 seconds until bond sets. Do not reposition parts. Clean excess adhesive with tissue paper and replace the cap.
Cleanup:Cured adhesive may be cut away with caution using a sharp blade, removed with Duro Super Glue Remover, acetone or with boiling water.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Holds up to 13.6Kg, 17cm holds 1kgHang or mount kitchen splashbacks, outdoor décor or organise your tool shedIdeal for both indoor and outdoor use, no need for nails and screwsUV, temperature and humidity resistant
DetailsFor your toughest jobs, go for our strongest hold – Scotch™ Extreme Mounting Tape. Equipped with our powerful permanent adhesive, this double-sided tape defies is weather resistant for a long-lasting bond, indoors and outdoors. So whether you're mounting shelves in your new apartment, or adding wall organisation to the garage, Scotch™ Extreme Mounting Tape does the job quickly, easily and without the hassle of tools.
Recommended Surfaces: Wood, Metal, Concrete, Brick, Gyprock, Tiles, Acrylic. Not recommended for DrywallWaterproof once bonded to surfaceUses 3M VHB™ Tape, Extreme strength and high conformability
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Loctite Super Glue Professional in a bottle has proven superior performance over ordinary super glues. It works faster and holds stronger on more surfaces than ordinary instant adhesives thanks to a patented additive. Loctite Super Glue Professional's super strength formula is ideal for heavy-duty projects and repairs. It dries clear and sets without clamping. Loctite Super Glue Professional is resistant to moisture, most chemicals and freezing temperatures.
Recommended For:-Repairing figurines, costume jewellery, cameras, toys, metal car parts, wiper blades, rubber seals and O-rings-Bonding leather, cork, paper, cardboard, wood, chipboard, fabric, metal, ceramic, rubber and hard plastics such as Plexiglass, polycarbonate, polystyrene and PVC
Not Recommended For:-Styrofoam, foam rubber, pure bone china, glass, silicone rubber, PTFE, polyethylene and polypropylene-Use in dishwasher, oven or microwave-Use on repairs needing high flexibility-Glazed surfaces
Safety Precautions:Well-ventilated area, gloves.
Preparation:Surfaces must be clean, dry and free from oil, wax and paint. Protect work area. Lightly roughen smooth surfaces for better adhesion. Pre-fit parts to be joined.
Application:Twist off the cap by turning counter-clockwise. Apply sparingly to one side only using approximately one drop per square inch of surface. Press surfaces together immediately. Hold in place for 15 to 30 seconds until bond sets. Do not reposition parts. Clean excess adhesive with tissue paper and replace the cap.
Cleanup:Cured adhesive may be cut away with caution using a sharp blade, removed with Duro Super Glue Remover, acetone or with boiling water.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Colours to suit almost any timberWaxstix are so easy to use and so handy for quick repairs to scratched or damaged timber. Waxstix can be coated and stained. Plus, Waxstix contain no beeswax so they will not leave any white ring marking otherwise known as the "halo effect".
For most small scratches, simply rub the stick over the damaged area. For larger, deeper indentations (where TIMBERMATE water-based Woodfiller cannot be used), heat a knife blade with a flame or a soldering iron or stove lighter and fill the damaged area with hot wax. Remove excess wax by rubbing with the smooth side of sandpaper, a piece of cardboard or an old credit card. Use a cotton cloth to buff and remove excess wax.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
UHU All Purpose Adhesives Super Strong & Safe, the super strong and super fast adhesive, which is adjustable - no instant finger bonding. Suitable for virtually all flexible, solid, porous and non-porous materials. Formula patented. Withstands vibrations and tremors. Moisture and heat resistant from -50°C to +100°C.
Materials
Universal - glues porcelain, ceramic, many plastic materials, metal, wood, glass, leather, rubber, Styrofoam®, paper, cardboard.
Not suitable for leather clothing, textiles, PE and PP.
Use and Handling Instructions
Surfaces to be stuck together must be dry and free of dust and grease. Apply a thin layer of adhesive to one side. Press parts together. Glue joint remains correctable for approx. 20 seconds. The thinner the film of adhesive, the stronger the bond.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
3 x 1g originally sealed tubes
ideal portion for one application.
in a handy storage box
reaches the smallest corners and joints
Extra strong super glue in 3 x 1g tubes, packaged in a small storage box, ensuring optimal quality for every new application. The liquid adhesive reaches the smallest corners and joints.
Materials
Glues many plastics, porcelain, ceramic, metal, wood and rubber. Not suitable for leather clothing, PE, PP nor styrofoam.
Use and Handling Instructions
Surfaces to be stuck together must fit exactly and must be dry and free of dust and grease. Apply a thin layer of adhesive to one side. The thinner the film of adhesive, the stronger the bond. Press the parts together immediately and hold in place for a short time. Breathing upon the surfaces to be stuck will speed up bonding. After use, wipe the applicator tip dry and close firmly. Will last longer if stored in a cool place.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
PROPERTIES
Extra strong
Fast but temporarily adjustable
Does not drip
Ideal for porous materials and vertical surfaces
Dishwasher proof and water resistant
APPLICATION
SUITABLE FOR:
Ideal for small-area bonds. Glues almost all solid and flexible materials like ceramics, leather, rubber, many plastics (such as rigid PVC, ABS, PS, Plexiglas®, polycarbonate (Makrolon®), and phenolic resins (Bakelite®)), porcelain, metal, wood, cork, felt, and cloth (check suitability first). Only partly suitable for glass (over a certain period of time the bond becomes brittle, causing it to weaken). Ideal for porous materials.
NOT SUITABLE FOR:
Not suitable for PE, PP, silicone resins, PTFE, Styrofoam®, fabrics and leather clothing.
BEFORE USE:
Working conditions
Do not use at temperatures below +10 °C. The glue responds best to an air humidity level of 50-70 %.
Surface requirements
Surfaces to be glued must be clean, dry, and free of dust and grease, and must fit exactly.
Preliminary surface treatment
Any dust, oil, grease, wax or separating agent should be thoroughly removed from the surfaces to be stuck together. The best way to achieve this is to rub the parts a number of times with appropriate solvents, such as acetone (if suitable for the material – check first!). For metals and metal alloys it is usually sufficient to roughen the surface using emery paper or by grinding or brushing.
DURING USE:
Directions for use
1. To pierce the membrane, turn the cap clockwise firmly onto the tube. Tip: do not press the tube while piercing. 2. Unscrew the cap to reveal the applicator. Apply the adhesive directly from the tube, using the nozzle, as thinly as possible onto one side (too much glue slows down the curing process significantly). Press parts together immediately. After use, clean nozzle with a dry tissue and replace cap.
Advice
When glueing at low humidity, curing time can be shortened by briefly breathing onto one of the parts to be assembled. The best glueing results are reached at room temperature.
Points of attention
Contains cyanoacrylate. Bonds skin and eyelids together in seconds. If product comes into contact with the eyes, rinse immediately with plenty of water and seek medical advice. In case of contact with skin, glue can be dissolved by soaking in warm soapy water. Then apply a skin cream. May cause respiratory irritation. Avoid breathing vapours. Keep out of the reach of children.
AFTER USE:
Stains/residue
Wipe off excess glue immediately with a dry cloth. After curing, glue residue is very difficult to remove. Acetone will dissolve glue but very slowly (check suitability first).
Storage conditions
Store in a dry, cool, frost-free place. Storage below +5 °C (in refrigerator) ensures maximum shelf life.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
T-Rex® Ferociously Strong Waterproof Tape provides tough waterproof adhesion under wet and dry conditions. Built with R-Flex Technology™, T-Rex Waterproof Tape can stretch up to 700% of its original length. It’s strong enough to be used for general purpose indoor or outdoor fixes that require a waterproof seal, like repairing a rip in an above-ground pool or temporarily stopping a leak in a water pipe. Or, apply it underwater and push it into cracks and rough, dirty surfaces. Formulated to withstand extreme temperatures from -56C to 93C., its UV-resistant formulation won’t break down under harsh sunlight. T-Rex Waterproof Tape. Flexible, ferociously strong, and waterproof like no other.
Features
Waterproof backing enhanced with R-Flex Technology™ for greater durability
Can be used underwater
UV resistant
All-weather: withstands temperatures from -56C to 93C.
WATERPROOF ADHESION
Extra thick butyl-based adhesive means durable repairs, even under water.
T-Rex® Ferociously Strong Waterproof Tape provides tough waterproof adhesion under wet and dry conditions. Built with R-Flex Technology™, T-Rex Waterproof Tape can stretch up to 700% of its original length. It’s strong enough to be used for general purpose indoor or outdoor fixes that require a waterproof seal, like repairing a rip in an above-ground pool or temporarily stopping a leak in a water pipe. Or, apply it underwater and push it into cracks and rough, dirty surfaces. Formulated to withstand extreme temperatures from -56C to 93C., its UV-resistant formulation won’t break down under harsh sunlight. T-Rex Waterproof Tape. Flexible, ferociously strong, and waterproof like no other.
FEATURES:
Waterproof backing enhanced with R-Flex Technology™ for greater durability
Can be used underwater
UV resistant
All-weather: withstands temperatures from -56C to 93C.
WATERPROOF ADHESION
Extra thick butyl-based adhesive means durable repairs, even under water.
R-FLEX TECHNOLOGY
Durable, flexible and UV resistant backing for long lasting repairs.
ALL WEATHER
Waterproof and built to withstand extreme temperatures from -56C to 93C.
Durable, flexible and UV resistant backing for long lasting repairs.
ALL WEATHER
Waterproof and built to withstand extreme temperatures from -56C to 93C.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
T-Rex® Ferociously Strong Waterproof Tape provides tough waterproof adhesion under wet and dry conditions. Built with R-Flex Technology™, T-Rex Waterproof Tape can stretch up to 700% of its original length. It’s strong enough to be used for general purpose indoor or outdoor fixes that require a waterproof seal, like repairing a rip in an above-ground pool or temporarily stopping a leak in a water pipe. Or, apply it underwater and push it into cracks and rough, dirty surfaces. Formulated to withstand extreme temperatures from -56C to 93C., its UV-resistant formulation won’t break down under harsh sunlight. T-Rex Waterproof Tape. Flexible, ferociously strong, and waterproof like no other.
Features
Waterproof backing enhanced with R-Flex Technology™ for greater durability
Can be used underwater
UV resistant
All-weather: withstands temperatures from -56C to 93C.
WATERPROOF ADHESION
Extra thick butyl-based adhesive means durable repairs, even under water.
T-Rex® Ferociously Strong Waterproof Tape provides tough waterproof adhesion under wet and dry conditions. Built with R-Flex Technology™, T-Rex Waterproof Tape can stretch up to 700% of its original length. It’s strong enough to be used for general purpose indoor or outdoor fixes that require a waterproof seal, like repairing a rip in an above-ground pool or temporarily stopping a leak in a water pipe. Or, apply it underwater and push it into cracks and rough, dirty surfaces. Formulated to withstand extreme temperatures from -56C to 93C., its UV-resistant formulation won’t break down under harsh sunlight. T-Rex Waterproof Tape. Flexible, ferociously strong, and waterproof like no other.
FEATURES:
Waterproof backing enhanced with R-Flex Technology™ for greater durability
Can be used underwater
UV resistant
All-weather: withstands temperatures from -56C to 93C.
WATERPROOF ADHESION
Extra thick butyl-based adhesive means durable repairs, even under water.
R-FLEX TECHNOLOGY
Durable, flexible and UV resistant backing for long lasting repairs.
ALL WEATHER
Waterproof and built to withstand extreme temperatures from -56C to 93C.
Durable, flexible and UV resistant backing for long lasting repairs.
ALL WEATHER
Waterproof and built to withstand extreme temperatures from -56C to 93C.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Experience unmatched strength and durability with our T-Rex Ferociously Strong Tape, now available at Glues Australia. Measuring 9.14 meters in length, this tape is specifically designed to withstand the toughest situations and most demanding projects.
Crafted for homeowners, craftsmen, and outdoor enthusiasts, T-Rex® Tape distinguishes itself from ordinary duct tapes with its formidable holding power. This makes it your go-to solution for enduring repairs, creative DIY projects, or any challenging task you encounter. The secret to its exceptional performance lies in its aggressive double-thick adhesive. This feature allows the tape to adhere firmly to rough, dirty surfaces in all types of weather and temperature conditions.
T-Rex® Tape is more than just a tool; it's a reliable partner for both home use and professional job sites. It outlasts and outperforms regular duct tape, ensuring that your projects, big or small, are held together longer and stronger.
Key Features:
All-Weather Capabilities: Equipped with a waterproof backing, T-Rex® Tape stands resilient against harsh weather elements, even in the coldest temperatures. This feature makes it an ideal choice for outdoor repairs and applications.
Enhanced Durability: The tape boasts a high-tensile woven scrim, contributing to its strength and long-lasting nature. Whether it’s used for heavy-duty tasks or simple fixes, the tape’s robust construction ensures it won’t give in.
Superior Holding Power: With its double-thick adhesive, T-Rex® Tape grips onto rough and uneven surfaces with unparalleled strength. This makes it perfect for tasks that require a strong, reliable hold.
Versatile Usage: Suitable for both indoor and outdoor environments, the tape is manufactured using UV-resistant materials. These materials prevent the tape’s adhesive from weakening under harsh UV rays, extending its lifespan.
Wide Application Range: T-Rex® Tape is versatile enough to be used on a variety of surfaces, including brick, concrete, shingles, both painted and non-painted wood, and vinyl siding. This makes it a must-have in any toolbox.
Heavy-Duty Construction: Made with a heavy-duty knit cloth, the tape is designed for long-lasting repairs or applications. Whether it's for a temporary fix or a permanent solution, you can count on its reliability.
Usage Applications:
Home repairs, including fixing broken items and sealing leaks.
Crafting and DIY projects, offering creative flexibility.
Outdoor applications, including camping gear repairs.
Professional job site tasks, providing reliability and strength.
Why Choose T-Rex® Tape?
When you choose T-Rex® Tape, you're not just selecting a tape; you're choosing a commitment to excellence and reliability. Its unique composition allows it to withstand challenges that ordinary tapes can't handle. Whether you're a professional tradesperson or a DIY enthusiast, T-Rex® Tape is the perfect addition to your toolkit, providing a strong, durable solution for any project.
In conclusion, T-Rex® Tape is not just tape; it's a symbol of strength, resilience, and versatility. Its all-weather, UV-resistant features, combined with its superior adhesive strength, make it an indispensable product for anyone who values quality and reliability in their tools. Available now at Glues Australia – your trusted source for high-quality adhesive solutions.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Tommy Tape® Self-Fusing Silicone Tape
The next generation of tape is here — premium, adhesive-free repair and sealing tape for fast fixes at home, on the job, and on the road.
Tommy Tape self-fusing silicone tape saves time and money across plumbing, electrical, automotive, marine, garden, and industrial jobs. Unlike vinyl or cloth tapes, it uses no adhesive. Instead, it chemically bonds (self-fuses) to itself on contact to form a tough, flexible, and permanently water-tight wrap — even underwater.
Why you’ll love it
Extreme temperature range: operates from −65 °F to +500 °F (approx. −54 °C to +260 °C).
Electrical safety: insulates up to 8,000 V per layer (typical PVC electrical tape ≈ 600 V).
Leaves no residue: no adhesive means no sticky mess when removed.
Weather- & waterproof: seals within seconds; ideal for outdoor and marine use.
Flexible & form-fitting: stretches over 300% to wrap irregular shapes, fittings, and bends.
Built to last: resists UV, oil, salt, and common chemicals; helps combat corrosion.
Popular uses
Plumbing: emergency seals on copper, PVC, and garden hoses; patch vacuum and pool hoses.
Electrical: bundling and insulating leads, wire harnesses, extension-cord strain relief (power off first).
Automotive & 4×4: wrap frayed looms, protect hoses, create quick roadside fixes.
Marine: mast boot wraps, deck-side waterproofing, salt-spray protection.
Tools & grips: re-grip shovels, rakes, wheelbarrows, gym dumbbells, walking canes.
Sports & DIY: re-grip golf clubs, tennis/pickleball paddles; improve wheelchair and shower-chair grip.
Home & garden: weatherproof outdoor cables, protect back-yard gear and appliances.
Industrial: protective wraps on fittings, temporary containment where adhesives aren’t suitable.
How to apply (best results)
Prep: Turn power/water off where applicable. Clean and dry the area if possible.
Start & anchor: Peel off the liner, stretch the tape as you begin to wrap, and press the starting end onto itself to anchor.
Stretch & overlap: Stretch to at least 2× its length (more stretch = stronger fuse). Overlap each wrap by ½ width.
Build layers: Add additional layers for higher pressure, stronger seals, or increased dielectric protection.
Finish: End the wrap on itself and press firmly. Full fusion develops quickly; handle with care while it sets.
Remove: Cut off (do not unwind) when it’s time to replace — it leaves no residue.
Specifications
Material
Silicone rubber (self-fusing)
Adhesive
None (bonds to itself on contact)
Dielectric Strength
Up to 8,000 V per layer (build layers for higher insulation)
Temperature Range
−65 °F to +500 °F (approx. −54 °C to +260 °C)
Resistance
UV, oil, salt, weather, and common household/automotive chemicals
Water Performance
Weatherproof & waterproof; can be applied underwater in many scenarios
Elongation
Stretches over 300% for tight, conformal wraps
Removal
Cut off to remove; no sticky residue
Colours / Sizes
Varies by SKU (see options above)
Better than traditional tapes
Feature
Tommy Tape Self-Fusing Silicone
Vinyl / Cloth Electrical Tape
Adhesive
No adhesive (self-fuses)
Pressure-sensitive adhesive (leaves residue)
Waterproof Seal
Yes — seals in seconds; can be used underwater
Limited; adhesive can lift when wet
Dielectric Strength
Up to 8,000 V per layer
Typically ~600 V
Temperature Range
−54 °C to +260 °C
Narrower range; softens or becomes brittle
UV/Chemical Resistance
Excellent (UV, oil, salt, chemicals)
Moderate; can degrade outdoors
Residue on Removal
None — clean cut-off
Commonly leaves sticky residue
FAQs
Can I use it on live electrical circuits?
No. Always switch power off before wrapping. Build sufficient layers for the required insulation, and follow local electrical standards.
Will it stick to wet or oily surfaces?
Because it bonds to itself (not the substrate), it can often be applied in damp or even underwater situations. For best results, clean and dry the area first.
Is it reusable?
Once fused, it forms a single mass. Cut it off to remove; it won’t unwind. Apply a fresh wrap if needed.
What isn’t it for?
Not a substitute for permanent structural repairs. Avoid use on fuel lines or high-pressure systems without proper engineering sign-off.
Notes: Performance values are typical and depend on application method, substrate, and number of layers. Always test on a small area first. Follow safety guidelines for electrical and pressurised systems.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Tommy Tape® Self-Fusing Silicone Tape
The next generation of tape is here — premium, adhesive-free repair and sealing tape for fast fixes at home, on the job, and on the road.
Tommy Tape self-fusing silicone tape saves time and money across plumbing, electrical, automotive, marine, garden, and industrial jobs.
Unlike vinyl or cloth tapes, it uses no adhesive. Instead, it chemically bonds (self-fuses) to itself on contact to form a tough, flexible, and permanently water-tight wrap — even underwater.
Why you’ll love it
Extreme temperature range: operates from −65 °F to +500 °F (approx. −54 °C to +260 °C).
Electrical safety: insulates up to 8,000 V per layer (typical PVC electrical tape ≈ 600 V).
Leaves no residue: no adhesive means no sticky mess when removed.
Weather- & waterproof: seals within seconds; ideal for outdoor and marine use.
Flexible & form-fitting: stretches over 300% to wrap irregular shapes, fittings, and bends.
Built to last: resists UV, oil, salt, and common chemicals; helps combat corrosion.
Popular uses
Plumbing: emergency seals on copper, PVC, and garden hoses; patch vacuum and pool hoses.
Electrical: bundling and insulating leads, wire harnesses, extension-cord strain relief (power off first).
Automotive & 4×4: wrap frayed looms, protect hoses, create quick roadside fixes.
Marine: mast boot wraps, deck-side waterproofing, salt-spray protection.
Tools & grips: re-grip shovels, rakes, wheelbarrows, gym dumbbells, walking canes.
Sports & DIY: re-grip golf clubs, tennis/pickleball paddles; improve wheelchair and shower-chair grip.
Home & garden: weatherproof outdoor cables, protect back-yard gear and appliances.
Industrial: protective wraps on fittings, temporary containment where adhesives aren’t suitable.
How to apply (best results)
Prep: Turn power/water off where applicable. Clean and dry the area if possible.
Start & anchor: Peel off the liner, stretch the tape as you begin to wrap, and press the starting end onto itself to anchor.
Stretch & overlap: Stretch to at least 2× its length (more stretch = stronger fuse). Overlap each wrap by ½ width.
Build layers: Add additional layers for higher pressure, stronger seals, or increased dielectric protection.
Finish: End the wrap on itself and press firmly. Full fusion develops quickly; handle with care while it sets.
Remove: Cut off (do not unwind) when it’s time to replace — it leaves no residue.
Specifications
Material
Silicone rubber (self-fusing)
Adhesive
None (bonds to itself on contact)
Dielectric Strength
Up to 8,000 V per layer (build layers for higher insulation)
Temperature Range
−65 °F to +500 °F (approx. −54 °C to +260 °C)
Resistance
UV, oil, salt, weather, and common household/automotive chemicals
Water Performance
Weatherproof & waterproof; can be applied underwater in many scenarios
Elongation
Stretches over 300% for tight, conformal wraps
Removal
Cut off to remove; no sticky residue
Colours / Sizes
Varies by SKU (see options above)
Better than traditional tapes
Feature
Tommy Tape Self-Fusing Silicone
Vinyl / Cloth Electrical Tape
Adhesive
No adhesive (self-fuses)
Pressure-sensitive adhesive (leaves residue)
Waterproof Seal
Yes — seals in seconds; can be used underwater
Limited; adhesive can lift when wet
Dielectric Strength
Up to 8,000 V per layer
Typically ~600 V
Temperature Range
−54 °C to +260 °C
Narrower range; softens or becomes brittle
UV/Chemical Resistance
Excellent (UV, oil, salt, chemicals)
Moderate; can degrade outdoors
Residue on Removal
None — clean cut-off
Commonly leaves sticky residue
FAQs
Can I use it on live electrical circuits?
No. Always switch power off before wrapping. Build sufficient layers for the required insulation, and follow local electrical standards.
Will it stick to wet or oily surfaces?
Because it bonds to itself (not the substrate), it can often be applied in damp or even underwater situations. For best results, clean and dry the area first.
Is it reusable?
Once fused, it forms a single mass. Cut it off to remove; it won’t unwind. Apply a fresh wrap if needed.
What isn’t it for?
Not a substitute for permanent structural repairs. Avoid use on fuel lines or high-pressure systems without proper engineering sign-off.
Notes: Performance values are typical and depend on application method, substrate, and number of layers. Always test on a small area first. Follow safety guidelines for electrical and pressurised systems.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Tarzan’s Grip Super Glue is a fast-setting cyanoacrylic acid ester based adhesive. Tarzan's Grip Super Glue dries colourless.
Special multi-purpose formula allows product to bond to a variety of surfaces
Quick-setting
Dries clear, therefore no mess
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Tarzan's Grip Mounting Tape is a double sided, heavy duty, high strength tape that instantly grabs for easy, fast and permanent mounting.
It is ideal for a multitude of surfaces, including metal, wood, rubber, leather, china, brick, stone, plasterboard and most plastics.
Extremely strong
Instant grab
Solvent free
Permanent
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Instant set, high viscosity, multipurpose super glue
Suitable for bonding substrates with irregular surfaces and in vertical applications
Super high strength bond to most plastics, rubber, timber, ceramics, paper, card, leather and metals
Controlled dosage applicator nozzle
Use:
As an instant setting adhesive for small bonding jobs such as bonding most metals, plastics, rubber, fabrics, wood, paper and other materials
Can be used on porous substrates such as porcelain and china
Small repairs to glasses, bonded shoe soles, picture frames, ceramics, toys and small electronic equipment, etc.
Surfaces with small irregularities max. 0.5 mm
On vertical surfaces
Characteristics and Advantages
One Component
Easy to apply, non-sag, gel consistency
Very rapid, tenacious bond to numerous substrates, e.g., plastics, rubber, metals, wood, ceramics, paper, card
Low consumption adhesive
Versatile, allows adhesion between different materials
Colourless
Durable
Packaging
3 g Tube
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Why Choose Selleys Super Glue Adjustable Gel?
Selleys Super Glue Adjustable Gel is designed for everyday household repairs, delivering precision and convenience. Its fast-acting formula bonds in just 30 seconds, while the adjustable setting time allows for perfect alignment before the adhesive sets. Ideal for use on a wide range of materials, it’s your go-to solution for quick and reliable fixes.
Key Benefits:
Adjustable Setting Time: Allows precise alignment before setting.
Rapid Bonding: Bonds in 30 seconds for fast repairs.
Versatile: Adheres to ceramics, china, metal, wood, and most plastics.
Easy to Use: No mixing required, with a convenient gel formulation for clean application.
Where Can This Product Be Used?
Everyday household repairs on:
Ceramic and China
Metal and Wood
Most Plastics*
What Materials Is It Suitable For?
Bonds a variety of porous and non-porous surfaces.
Note: Not recommended for use on leather, polyethylene, polypropylene, or PTFE. Avoid applications involving exposure to water or dishwashers.
How to Use Selleys Super Glue Adjustable Gel
Prepare:
Pierce the seal by attaching the nozzle with the cap and turning clockwise.
Ensure surfaces are clean, dry, and free from dust, dirt, and grease.
Apply:
Apply a small amount of adhesive to the surfaces to be bonded.
Press surfaces together gently and hold for several minutes to ensure sufficient bond strength.
After Use:
Wipe the nozzle clean with a cloth or paper.
Replace the cap securely.
Limitations
Not suitable for use on leather, polyethylene, polypropylene, or PTFE.
Will not permanently bond vessels exposed to water or dishwashers.
Handy Tips for Best Results
Ideal for vertical applications and slightly porous materials.
Use 1 drop per cm² for optimal bonding.
Sets in 30 seconds, achieving maximum bond strength in 24 hours.
Clean-Up Instructions
Wipe the tip of the tube with a cloth or paper after use.
Replace the cap tightly to avoid drying out the product.
Product Details
Size: 3g Tube
Colour: Clear
Technology: Cyanoacrylate
Recommended Use: Interior
Transform your household repairs with the precision and reliability of Selleys Super Glue Adjustable Gel. Perfect for quick fixes, durable bonds, and easy application!
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Why Choose Selleys Super Glue Adjustable Gel?
Selleys Super Glue Adjustable Gel is designed for everyday household repairs, delivering precision and convenience. Its fast-acting formula bonds in just 30 seconds, while the adjustable setting time allows for perfect alignment before the adhesive sets. Ideal for use on a wide range of materials, it’s your go-to solution for quick and reliable fixes.
Key Benefits:
Adjustable Setting Time: Allows precise alignment before setting.
Rapid Bonding: Bonds in 30 seconds for fast repairs.
Versatile: Adheres to ceramics, china, metal, wood, and most plastics.
Easy to Use: No mixing required, with a convenient gel formulation for clean application.
Where Can This Product Be Used?
Everyday household repairs on:
Ceramic and China
Metal and Wood
Most Plastics*
What Materials Is It Suitable For?
Bonds a variety of porous and non-porous surfaces.
Note: Not recommended for use on leather, polyethylene, polypropylene, or PTFE. Avoid applications involving exposure to water or dishwashers.
How to Use Selleys Super Glue Adjustable Gel
Prepare:
Pierce the seal by attaching the nozzle with the cap and turning clockwise.
Ensure surfaces are clean, dry, and free from dust, dirt, and grease.
Apply:
Apply a small amount of adhesive to the surfaces to be bonded.
Press surfaces together gently and hold for several minutes to ensure sufficient bond strength.
After Use:
Wipe the nozzle clean with a cloth or paper.
Replace the cap securely.
Limitations
Not suitable for use on leather, polyethylene, polypropylene, or PTFE.
Will not permanently bond vessels exposed to water or dishwashers.
Handy Tips for Best Results
Ideal for vertical applications and slightly porous materials.
Use 1 drop per cm² for optimal bonding.
Sets in 30 seconds, achieving maximum bond strength in 24 hours.
Clean-Up Instructions
Wipe the tip of the tube with a cloth or paper after use.
Replace the cap tightly to avoid drying out the product.
Product Details
Size: 1g Tube
Colour: Clear
Technology: Cyanoacrylate
Recommended Use: Interior
Transform your household repairs with the precision and reliability of Selleys Super Glue Adjustable Gel. Perfect for quick fixes, durable bonds, and easy application!
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Selleys Spakfilla Rapid is a ready-mixed lightweight filler that is fast drying, virtually non-shrinking, non-cracking & needs only one application.
Features
Fill cracks and holes in a single application
Pre-mixed and ready to use
Minimal shrinkage so no need to overfill
Very fast drying allowing sanding and painting in a short time period
Comes complete with a filling spatula for ease of use
Water-based, so can be cleaned up with water
Paintable with oil and water-based paints
Where can this product be used?
Filling cracks and holes on surfaces where no structural movement occurs
Filling cracks in walls, ceilings, doors, windows
Repairing holes in walls, ceilings, doors and windows
What materials is this product suitable for?
Wallboard
Wood
Masonry
Plaster
Primed nail heads
Plasterboard
Colours White
Technology Water Based
Use Interior
Exterior (when painted)
How To Use
Ensure surfaces are clean, dry and free of loose material.
Using the flexible spatula provided on the lid, press the filler firmly into the crack or hole and smooth off surface; there is no need to overfill.
Lightly sand back any excess filler from the surface after product dries (30 minutes in thin applications).
Dust off any loose dust before painting with water-based paints. For oil-based paints allow 24 hours before painting.
Limitations:
Not recommended for use on plastic, metal or exterior timber likely to swell/shrink on absorption of water.
Product is not flexible so not suitable for use between surfaces that are subject the structural movement - use Selleys No More Gaps
Not recommended for use where load or compression occurs as product may be crushed e.g. behind a door if the knob touches against the wall.
Nailing this product is not recommended.
Avoid using below 5°C or in wet conditions.
Handy Tips
Painting with oil-based paints is not recommended until 24 hours after filler has been applied.
Water based paints may be used immediately after filler has set.
If filler is found to have stiffened prior to use, stir product. Product that has actually hardened should be discarded. If still too dry add one teaspoon of water and stir again to desired consistency.
Application tools may be cleaned with water.
Before painting, clean dust and filler particles using Selleys Sugar Soap or Selleys Super Kleen.
In exterior applications, protect from rain until dry and painted over with 2 coats of paint.
Some paints may temporarily discolour when applied over the filler, but will revert to the correct colour once dry.
For applications more than 2mm deep, or in cold or humid conditions, expect longer drying times.
Keep container closed when not in use.
Clean Up
Uncured product may be removed with water.
Cured product can be removed by scraping or sanding.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
A strong, weather and impact resistant adhesive that is ideal for most shoe repairs.
Features
Easy to use
Strong
Flexible Bond
Weather resistant
Impact resistant
Appearance
Dries yellowish/beige
Where can this product be used?
Sole
Tongue
Strap
Inner sole
Attach beads, jewels, decorative items
Will not bond Polyethylene or Polypropylene plastics. For these we recommend Selleys Plastics Glue. May not adhere to some plastic / rubber soles.
What materials is this product suitable for?
Leather
Canvas
Fabric
Rubber
Cork
Most Plastics
EVA foam (e.g Desert boots sole)
How to use this product
Ensure surfaces are clean, dry and free from dirt or grease. Remove cap and carefully pierce seal.
For larger area repairs such as shoe soles, we recommend you use the contact bond method:
For quick and even bonding, apply to one surface only, press together and pull apart. Keep apart until the adhesive film is almost dry (approx. 10 – 20 minutes).
Carefully line up surfaces to be joined and press surfaces firmly together. Bonds immediately on contact. Clamping may be necessary in some applications.
For smaller areas, either use the contact method as above, or join with a wet bond:
Apply Shoe Glue to one surface only and immediately press together. Lightly clamp or hold until dry.
Allow adhesive to achieve maximum bond strength (24 hours) before wearing your repaired shoe/s.
Wipe nozzle clean and replace cap immediately after use. Clean up application tools and excess adhesive with turps before it dries.
Handy tips
A piece of plastic from a takeaway container makes a good applicator for shoe soles.
Bulldog clips are handy to use for clamping straps and other small areas.
Pack includes a removable nozzle for easy application.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Selleys All Clear is a multi-purpose sealant that provides long-lasting protection. All Clear is the solution to water leakage and seepage around the home.
Best for : Metal, Timber, Glass, Glazed tiles, Brick, Stone, Many plastics (may damage polystyrene and polycarbonate)
Features
Works on wet, oily, and dirty surfaces*
Crystal clear finish
Paintable
Mould and mildew resistant
Water-resistant
Strong adhesion
Where can this product be used?
Sky lights
Windows frames and glazing
Roof and gutters
Sealing metal or PVC guttering and down pipes
Air conditioners' enteries
Sealing metal or PVC guttering and down pipes
Shower screens
Sinks and basins
Sealing leaks in caravans and recreation vehicles
What materials is this product suitable for?
Metal
Timber
Glass
Glazed tiles
Brick
Stone
Many plastics (may damage polystyrene and polycarbonate)
Use only in a well-ventilated area. Avoid contact with skin and eyes and breathing vapours.
The surface must be free from dust, loose particles, and soap residue. If required, clean with turps. Porous surfaces must be dry.
Cut cartridge, fit nozzle, and cut to size. Insert the cartridge into a caulking gun such as SELLEYS LIGHT SPEED Caulking gun.
Apply with a caulking gun, forcing product into the gap. Press into cracks or surface by pushing sealant ahead of nozzle.
Smooth sealant surface immediately with tool dipped in turps.
Limitations:
May damage some plastics e.g. polystyrene and polycarbonate.
Not for permanent water immersion e.g fish tanks
Not suitable for use over silicones
Not suitable for polystyrene foam
*Wet Surfaces: Can be applied to clean, wet non-porous surfaces e.g. metals, glass, glazed tiles – not wet porous surfaces e.g. concrete, timber. Remove as much water as possible, preferably with acetone. Keep nozzle close to surface so sealant contacts surface immediately. Flatten immediately into joints. Adhesion improves on drying.
Skins immediately, maximum toughness achieved over several days.
Paintable immediately with water-based paints. For oil-based paints undercoat first with a water-based paint.
Store in cool dry conditions, below 30°C
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Bonds most materials within 30 seconds
The level of liquidity and lack of viscosity work best for applications where flexibility and seeping is required
25ml container
Integrated nozzle for easy application
Ritetite Turbo is a one-component liquid super glue that bonds extremely quickly.
When it comes into contact with surface moisture, it hardens instantly. Its extremely fast curing qualities make it an excellent choice for high-speed industrial production, where an ultra-rapid-acting adhesive with low consistency and viscosity is required.
Surface Preparation prior to bonding with RITETITE TURBO
Surfaces should be clean, dry and grease-free before applying the adhesive. Use a suitable solvent (such as acetone or isopropanol) for the degreasing of surfaces. Some metals such as aluminum, copper and its alloys will benefit from light abrasion with emery cloth (or similar), to remove the oxide layer.
RITETITE TURBO Directions for use.
1) Apply the adhesive sparingly to one surface.
2) Then, bring the components together quickly and correctly aligned.
3) Apply sufficient pressure to ensure the adhesive spreads into a thin film.
4) Do not disturb or re-align until sufficient strength is achieved, normally in a few seconds.
5) Remove any surplus adhesive solvent, nitromethane, or acetone.
NB:
For difficult or porous surfaces using a RITETITE activator is recommended. If bonding polypropylene, polyethylene, PTFE or silicone, prime first with a suitable primer.
For more information, download the Technical Data Sheet.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Bonds most materials within 30 seconds
High-viscosity allows for greater accuracy and detail
Large 100ml container
Integrated nozzle for easy application
Ritetite Control is a one-component gel super glue that bonds extremely quickly.
It’s made with a specially designed thixotropic formula that instantly polymerises (hardens) by absorbing surface moisture. Its fast-curing properties make it an excellent choice for high-speed industrial applications that require a gel-like, viscous adhesive that does not spread or leak like traditional super glue.
Ritetite Control works exceptionally well in poor-fitting applications such as rough metal or ceramic repairs, unfinished metal-to-metal bonding, and metal-to-rubber bonding due to its thick gel consistency.
Surface Preparation prior to bonding with RITETITE CONTROL
Surfaces should be clean, dry and grease-free before applying the adhesive. Use a suitable solvent (such as acetone or isopropanol) for the degreasing of surfaces. Some metals such as aluminum, copper and its alloys will benefit from light abrasion with emery cloth (or similar), to remove the oxide layer.
RITETITE CONTROL Directions for use.
1) Apply the adhesive sparingly to one surface.
2) Then, bring the components together quickly and correctly aligned.
3) Apply sufficient pressure to ensure the adhesive spreads into a thin film.
4) Do not disturb or re-align until sufficient strength is achieved, normally in a few seconds.
5) Remove any surplus adhesive solvent, nitromethane, or acetone.
NB:
For difficult or porous surfaces using a RITETITE activator is recommended. If bonding polypropylene, polyethylene, PTFE or silicone, prime first with a suitable primer.
For more information, download the Technical Data Sheet.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Fast setting supa glue in a convenient bottle that allows easy, controlled and precise application.
Features
Easy, controlled application
Non-drip glue saver nozzle, reduces waste and mess.
Long fine nozzle for precise application
Bonds a variety of surfaces
Extremely fast setting
Dries Clear for clean, neat results
Water resistant
No clamping necessary
No mixing required
Maximum strength achieved in 12 hours
Only takes 45 seconds to achieve initial bond
Non-clog cap
Forms a rigid bond
Upright self-standing bottle
Comfortable to hold
Where can this product be used?
Ideal for small repair jobs or when immediate results are required.
Water resistant not water proof, therefore not suitable for surfaces that will be continually wet
Not suitable for bonding plastics such as Polypropylene and Polyethylene.
Leather may become hardened or discoloured For interior use only
Not suitable for repairing items that are in direct contact with hot liquids
Will not permanently bond glass or materials containing alkaline elements.
Has no gap filling properties therefore surfaces need to be a close fit
Not recommended for highly porous surfaces
What materials is this product suitable for?
Bonds a variety of porous and non-porous surfaces
Metals
China
Rubber
Leather
Some plastics
Wood
How to use this product
Supa Glue works best when the surfaces to be bonded are close fitting.
Surfaces to be bonded should be clean, dry and free of dust.
Hold bottle in an upright position. Pierce seal by attaching nozzle and cap and turning clockwise.
Remove cap and squeeze gently to apply a small amount of glue to one surface. Bring surfaces together and apply slight pressure. (30 seconds). The product grabs within 5-30 seconds, depending on environmental conditions and substrates to be bonded.
Allow 30 minutes for sufficient bond strength for practical use. Maximum bond strength reached after 12 hours.
Handy tips
Cyanoacrylate adhesives can create a white residue on the surface of a substrate if the area is not well ventilated.
Clean the affected area with acetone to remove residue.
For best performance from this product after opening, store in the refrigerator or in a cool, dry place away from direct sunlight.
Excellent when used with other adhesives, as the temporary tack
For best results, ensure surfaces to be bonded are clean, free of dust, dry and close fitting
In the event that fingers get stuck together – don’t panic! Slowly twist fingers in opposite direction in hot soapy water.
Acetone (nail polish remover) or Olive oil can also be used to remove Quick Fix from skin.
While superglue is not recommended for use on some plastics, if your kids have broken their favourite toy, try this method: Line up the two pieces, glue it, leave it for 24hours to dry, then drop more glue on the break area like a ‘collar’/protective layer.
Since Quick Fix cures with moisture set times may be extended on very dry surfaces or under dry conditions.
Super glues cure more slowly when large amounts are used. For faster cure use sparingly.
Safety tips
Avoid contact with the skin and eyes. Avoid breathing vapour.
Quick Fix is non-hazardous once cured. Where Quick Fix residues are on the skin, it is recommended that the skin be soaked in warm to hot water to allow easy removal. It is not advisable to try to remove the cured adhesive by pulling and scraping the skin as this will only serve to damage the skin. Alternatively rub in hand cream or vegetable oil to accelerate the natural process of the skin sloughing off to remove the residue. Where immediate adhesive removal is considered necessary apply a solvent such as acetone (nail polish remover) then wash off with soapy water. Apply hand cream to replace naturals oils in skin.
Do not use solvents near eyes or open wounds.
In case of contact with eyes, flush with water for at least 15 minutes and seek medical attention.
Non toxic when set.
Storage and re-use
After use, wipe excess product from nozzle with a tissue dipped in acetone (found in some nail polish removers). Reseal cap in a clockwise direction. Tap bottle lightly on a flat surface to clear excess product from nozzle.
To remove excess from substrates, it is recommended that the material be soaked in a solution of acetone and water (i.e. 3 parts acetone to 1 part water). Where soaking is not possible, try placing a piece of absorbant material (eg cotton wool) soaked in acetone on the excess for 5 to 10 minutes, topping up the acetone if it evaporates. Gently rub the surface with the material to remove the residues. TEST THE SURFACE IN AN INCONSPICUOUS SPOT to ensure it is unaffected by acetone before attempting removal using thias method.
Ensure cap is replaced and store in a cool dry place. Cyanoacrylate based adhesives polymerise in the presence of moisture.
Store Upright.
For best performance from this product after opening, store in the refrigerator or in a cool, dry place away from direct sunlight.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Single Shot, no mess just throw away
Self piercing tube
Bonds in 10 seconds
Where can this product be used?
Ideal for small repair jobs or when immediate results are required
For interior projects and repairs
Water resistant not waterproof, therefore not suitable for surfaces that will be continually wet
Not suitable for bonding plastics such as Polypropylene and Polyethylene
Not suitable for repairing items that are in direct contact with hot liquids eg saucepans
Will not permanently bond glass or materials containing alkaline elements
Has no gap filling properties, therefore, surfaces need to be a close fit
Not recommended for highly porous surfaces
What materials is this product suitable for?
Metals
China
Rubber
Leather
Some plastics
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Polyfilla Rapid 30 340g: Your Go-To Quick-Set Filler for Interior and Exterior Surfaces
Quick, Reliable, and Versatile Filler for All Surface Types
If speed is of the essence, Polyfilla Rapid 30 340g is your ultimate choice for a high-quality plasterboard filler. Fill cracks, gaps, dents, and holes effortlessly in both interior and exterior surfaces.
Key Features:
Extremely easy to sand
Sets to a hard finish
Highly crack-resistant
Fills up to 50mm deep holes
Dries in as fast as 30 minutes*
Suitable for multiple surfaces: plasterboard, brick, timber, and concrete
How to Use:
Clean and dry the surface, ensuring no loose or powdery material.
Press the filler firmly into dents and holes, feathering edges to minimize sanding.
Allow 30-60 minutes drying time for thin applications, longer for oil-based paints and deeper applications.
For the smoothest finish, top with Poly Small Cracks and apply a paint undercoat before the final top coat.
Limitations & Tips:
Use Poly Gap filler where joint movement occurs.
Do not fill more than 50mm deep.
Clean up with water before the filler dries.
For quick paint-over solutions, consider using Poly Quick Dry.
*Drying time is based on a 2mm application.
With Polyfilla Rapid 30 340g, you are not just buying a filler; you are investing in speed, quality, and versatility for your home improvement projects.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Polyfilla Rapid 30 140g: Your Go-To Quick-Set Filler for Interior and Exterior Surfaces
Quick, Reliable, and Versatile Filler for All Surface Types
If speed is of the essence, Polyfilla Rapid 30 140g is your ultimate choice for a high-quality plasterboard filler. Fill cracks, gaps, dents, and holes effortlessly in both interior and exterior surfaces.
Key Features:
Extremely easy to sand
Sets to a hard finish
Highly crack-resistant
Fills up to 50mm deep holes
Dries in as fast as 30 minutes*
Suitable for multiple surfaces: plasterboard, brick, timber, and concrete
How to Use:
Clean and dry the surface, ensuring no loose or powdery material.
Press the filler firmly into dents and holes, feathering edges to minimize sanding.
Allow 30-60 minutes drying time for thin applications, longer for oil-based paints and deeper applications.
For the smoothest finish, top with Poly Small Cracks and apply a paint undercoat before the final top coat.
Limitations & Tips:
Use Poly Gap filler where joint movement occurs.
Do not fill more than 50mm deep.
Clean up with water before the filler dries.
For quick paint-over solutions, consider using Poly Quick Dry.
*Drying time is based on a 2mm application.
With Polyfilla Rapid 30 140g, you are not just buying a filler; you are investing in speed, quality, and versatility for your home improvement projects.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Polyfilla Rapid 30 100g: Your Go-To Quick-Set Filler for Interior and Exterior Surfaces
Quick, Reliable, and Versatile Filler for All Surface Types
If speed is of the essence, Polyfilla Rapid 30 100g is your ultimate choice for a high-quality plasterboard filler. Fill cracks, gaps, dents, and holes effortlessly in both interior and exterior surfaces.
Key Features:
Extremely easy to sand
Sets to a hard finish
Highly crack-resistant
Fills up to 50mm deep holes
Dries in as fast as 30 minutes*
Suitable for multiple surfaces: plasterboard, brick, timber, and concrete
How to Use:
Clean and dry the surface, ensuring no loose or powdery material.
Press the filler firmly into dents and holes, feathering edges to minimize sanding.
Allow 30-60 minutes drying time for thin applications, longer for oil-based paints and deeper applications.
For the smoothest finish, top with Poly Small Cracks and apply a paint undercoat before the final top coat.
Limitations & Tips:
Use Poly Gap filler where joint movement occurs.
Do not fill more than 50mm deep.
Clean up with water before the filler dries.
For quick paint-over solutions, consider using Poly Quick Dry.
*Drying time is based on a 2mm application.
With Polyfilla Rapid 30 100g, you are not just buying a filler; you are investing in speed, quality, and versatility for your home improvement projects.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Polyfilla P10 Gap Filler Rapid: The Ultra-Fast Solution for Perfect Fills
Features
Flexible
Smooth Finish
Rapid Drying Paintable in 10 minutes*
Low Shrinkage
Crack-Resistant*
Applications
Ideal for filling gaps around cornices, wall joints, skirting boards, as well as inside windows and door frames.
Usage Instructions
*To avoid paint cracking, apply to gaps no larger than 5mm deep and 10mm wide at temperatures above 20°C. Allow the sealant to dry before painting. Avoid applying paint too thickly.
When to Use
Paintable in just 10 minutes, allowing for fast project completion.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Parfix super glue is a fast setting cyanoacrylate-based adhesive that dries clear with a strong bond
Instant strong bond
Sets in 10 seconds
Dries clear
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Nordsjö Professional Rapid Repair Filler quickly fills small cracks and holes, such as drill and nail holes. It adheres perfectly to stone, concrete, drywall, plaster and stucco.
For filling and repairing small cracks and holes, such as drill holes and nails
Excellent adhesion to plasterboard, wood, brick, concrete, fiber cement, drywall, plaster and render
Not for use on metal, plastic, PVC and damp surfaces
Suitable for interior & exterior use
Tools Needed
Sharp Knife
Fine Sandpaper
Properties
Ready to use
Rapid dry: sand and paint after 15 minutes (5 mm layer at 20°C) with all types of paint
Easy to sand
Will not shrink
Accepts nails and screws
Maximum layer thickness: 5 mm
Maximum depth: 5 mm
Must be painted over when used outside (minimum 2 coats)
Colour: White
How to apply
Substrate must be clean, dry, dust and grease free.
Remove all loose materials.
Mix the product well before use.
Press filler into crack with a filling knife, smoothing off with a wet filling knife.
For deeper repairs, build up in layers of 5 mm, letting the product dry in between layers.
Remove any excess filler and leave to dry.
Once dry sand lightly if required.
Clean tools and hands with warm water immediately after use.
Do not store or use below 5°C.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Loctite Super Glue Longneck Bottle features a precision tip which allows controlled application without dripping, thus less mess. It has an easy-open cap with a metal pin that cleans and seals the nozzle for a clog-free performance. The long nozzle is ideal for gluing hard to reach surfaces. The ''finger friendly'' bottle keeps fingers glue free, as well as allows for a continuous flow or a precise drop of glue. It bonds a variety of materials including leather, ceramic, rubber, paper, metal, china, wood and most plastics. Loctite Super Glue Longneck Bottle dries clear and sets without clamping. Loctite Super Glue Longneck Bottle is resistant to moisture, most chemicals and freezing temperatures.
Recommended For
Bonding leather, cork, paper, cardboard, wood, chipboard, fabric, metal, ceramic, rubber and hard plastics such as Plexiglass™, polycarbonate, polystyrene and PVC
Repairing figurines, costume jewellery, cameras, toys, metal car parts, wiper blades, rubber seals and O-rings
Not Recommended For
Use in dishwasher, oven or microwave
Use on repairs needing high flexibility
Glazed surfaces
Exterior Applications
Styrofoam, foam rubber, pure bone china, glass, silicone rubber, PTFE, polyethylene and polypropylene
Safety Precautions
Apply in a well-ventilated area. Wear gloves and wash hands after use.
Preparation
Surfaces must be clean, dry and free from oil, wax and paint. Protect work area. Lightly roughen smooth surfaces for better adhesion. Pre-fit parts to be joined.
Application
Twist off the cap by turning counter-clockwise. Apply sparingly to one side only using approximately one drop per square inch of surface. Press surfaces together immediately. Hold in place for 15 to 30 seconds until bond sets. Do not reposition parts. Clean excess adhesive with tissue paper and replace the cap.
Cleanup
Cured adhesive may be cut away with caution using a sharp blade, acetone or with boiling water.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Loctite Super Glue Longneck Bottle features a precision tip which allows controlled application without dripping, thus less mess. It has an easy-open cap with a metal pin that cleans and seals the nozzle for a clog-free performance. The long nozzle is ideal for gluing hard to reach surfaces. The ''finger friendly'' bottle keeps fingers glue free, as well as allows for a continuous flow or a precise drop of glue. It bonds a variety of materials including leather, ceramic, rubber, paper, metal, china, wood and most plastics. Loctite Super Glue Longneck Bottle dries clear and sets without clamping. Loctite Super Glue Longneck Bottle is resistant to moisture, most chemicals and freezing temperatures.
Recommended For
Bonding leather, cork, paper, cardboard, wood, chipboard, fabric, metal, ceramic, rubber and hard plastics such as Plexiglass™, polycarbonate, polystyrene and PVC
Repairing figurines, costume jewellery, cameras, toys, metal car parts, wiper blades, rubber seals and O-rings
Not Recommended For
Use in dishwasher, oven or microwave
Use on repairs needing high flexibility
Glazed surfaces
Exterior Applications
Styrofoam, foam rubber, pure bone china, glass, silicone rubber, PTFE, polyethylene and polypropylene
Safety Precautions
Apply in a well-ventilated area. Wear gloves and wash hands after use.
Preparation
Surfaces must be clean, dry and free from oil, wax and paint. Protect work area. Lightly roughen smooth surfaces for better adhesion. Pre-fit parts to be joined.
Application
Twist off the cap by turning counter-clockwise. Apply sparingly to one side only using approximately one drop per square inch of surface. Press surfaces together immediately. Hold in place for 15 to 30 seconds until bond sets. Do not reposition parts. Clean excess adhesive with tissue paper and replace the cap.
Cleanup
Cured adhesive may be cut away with caution using a sharp blade, acetone or with boiling water.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Instant, crystal clear bonds that are water and dishwasher-resistant. Formulated to work on all types of glass.
Recommended on:
Glass, Crystal, Tinted Glass, Glass Works, Opaque Glass, Blown Glass.
Properties:
Bonds glass to glass
Glass to metal
Stained glass
Crystal and tinted glass
Water and dishwasher resistant
Bonds in seconds
Dries transparent for invisible bonds
Easy to open, self-piercing and anti-clog cap
Solvent-free
Step by Step:
Ensure surfaces to be joined are clean, completely dry and close fitting
Twist cap clockwise until it locks, then unscrew in an anti-clockwise direction to open
Carefully squeeze a small drop onto one surface. Press the surfaces together and hold until set
Replace the cap immediately and store upright in a cool dry place.
How to Repair a Glass Water Jug?
Loctite Super Glue Glass has been specially formulated to repair glassware, delivering a sparkling performance every time. Once dry it forms crystal clear bonds on all types of glass breakages and cracks, delivering water and dishwasher resistant seals that are not only neat and free from unsightly white glue marks but also strong enough to resist pressure from temperature changes and water. Loctite Super Glue Glass is designed to work on all kinds of glass: glass, crystal, tinted glass, glass works, opaque glass and blown glass, and has a high strength formula that ensures you get long-lasting durability.
Follow the step by step application guide:
1.Wash the broken area with water (avoid using detergent as this can affect the glue's performance) and dry thoroughly. Ensure that the surfaces to be joined are close fitting.
2.Carefully squeeze a small drop onto one of the broken parts. Press both surfaces together firmly and wait until they is set.
3.Do not move until the surfaces are set. Don’t worry if there is some excess glue, this can be easily removed once dry (see point 5)
4.Allow at least 1-2 hours to fully cure before using. For best results leave overnight.
5.Once dry, if there is any excess residue, gently wipe with a tissue dipped in Loctite Glue Remover or nail varnish remover containing acetone.
6.Replace the cap immediately and store the glue upright in a cool dry place.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
The unique rubber-infused gel formula allows powerful bonds that are extremely precise even on flexible materials. Ideal for porous and vertical surfaces, and strong enough to withstand extreme conditions. The gel’s high strength non-drip formula then dries transparent to form invisible bonds that give a long lasting durability that is both weather and shock-resistant. For intricate, hard to reach spots, Loctite Power Flex Gel Control features an easy grip squeeze bottle and nozzle for precise applications.
Recommended on:
Rubber, Leather, Wood, Metal, Porcelain, Paper, Plastic.
Properties:
-Rubber infused gel formula for extra strong and flexible bonds
-Ideal for porous and vertical surfaces
-Water resistant
-Bonds in seconds
-Withstands heavy loads
-Dries transparent
-Easy to open, self-piercing and anti-clog cap
-Choice of applicators: convenient tube or easy grip control with a longer nozzle
-Suitable for use on most surfaces*
-Solvent-free
-* Except polyethylene (PE), polypropylene (PP), car glass, Styropor® and synthetic fibres.
Step by Step
Ensure surfaces to be joined are clean, completely dry and close fitting.
Twist cap clockwise until it locks, then unscrew in an anti-clockwise direction to open.
Carefully squeeze a small drop onto one surface. Press the surfaces together and hold until set.
Replace the cap immediately and store upright in a cool dry place.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Loctite's versatile and reliable Super Glue Liquid is fast and strong and has a range of applicators that will get the job done quickly in every situation. It dries transparent to form a long-lasting invisible bond in seconds.
Now with a NEW formula, resisting to all conditions:
*Water and dishwashing
*Shock
*Temperatures from -50°C up to 120°C
Recommended on:
China, Porcelain, Metal, Rubber, Leather, Wood, Plastic (except PE/PP), Paper.
Properties:
Multi-use liquid superglue, ideal on non-porous surfaces
Water and dishwasher resistant
Shock resistant
Temperature resistant (from -50°C up to 120°C)
Bonds in seconds
Withstands heavy loads
Dries transparent
Easy to open, self-piercing and anti-clog cap
Choice of applicators - anti-spill / easy grip / long nozzle / brush-on
Suitable for use on most surfaces*
Solvent-free
*Except polyethylene (PE), polypropylene (PP), car glass, Styropor® and synthetic fibres.
Ensure surfaces to be joined are clean, completely dry and close fitting.
Twist cap clockwise until it locks, then unscrew in an anti-clockwise direction to open.
Carefully squeeze a small drop onto one surface. Press the surfaces together and hold until set.
Replace the cap immediately and store upright in a cool dry place.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
The Loctite Super Glue Creative Pen offers the ultimate solution for precise, fast, and reliable bonding. Its ergonomic pen design ensures a controlled application, perfect for intricate tasks like crafting, DIY projects, or quick household repairs. The pen tip provides pinpoint accuracy, so you can apply just the right amount of glue, reducing mess and waste. Loctite’s fast-drying formula creates a strong bond on materials such as wood, plastic, metal, ceramic, and leather, making it versatile for any project.
Whether you're fixing a broken ornament, assembling models, or working on craft projects with the kids, Loctite Super Glue Creative Pen guarantees a professional finish every time.
LOCTITE® Super Glue Creative Pen
Precision bonding on wood, metal, plastic, rubber, and more. Waterproof, weather-resistant, and shock-resistant. Equipped with a long nozzle and easy-grip squeeze bottle for fast and accurate application.
Characteristics:
LOCTITE® Super Glue Creative Pen is a one-part instant gel adhesive in a convenient dispenser, perfect for home use. It forms strong bonds between a wide range of common materials, including plastics, rubbers, metals, wood, ceramics, leather, fabrics, cardboard, and paper. Its non-drip formula allows for use on vertical or overhead surfaces. The ergonomic pack design ensures precise application, ideal for bonding smaller items.
Bonding Speed: Initial adhesion in 5 to 30 seconds, depending on the substrate.
Bond Strength (ISO 4587): 10 to 20 N/mm² (tensile shear) in 12 to 24 hours, depending on the substrate. Water-resistant to EN204-D3 standard. Ceramic bonds can withstand over 50 dishwasher cycles under controlled laboratory conditions.
Instructions for Use:
Ensure all surfaces to be bonded are clean, dry, and fit closely.
Twist the cap clockwise onto the pack until you hear a clicking sound. Do not overtighten; a three-quarter turn is sufficient.
Avoid skin contact with the glue.
Gently squeeze the rubber panels and apply a minimal amount of adhesive to one surface.
Press parts together immediately and hold with hand pressure for at least 1 minute.
Allow the bond to set undisturbed for 10 minutes, or preferably overnight, to achieve full bond strength.
Protect work surfaces and avoid spills. Remove cured glue with LOCTITE® Glue Remover.
For best results, apply at room temperature (15-30°C) with at least 30% relative humidity.
After use, wipe the nozzle clean with a tissue, replace the cap, and store in a cool, dry place.
Technical Data:
Composition: Ethyl cyanoacrylate
Appearance: Clear gel
Density: 1.1 g/cm³ @ 20°C
Viscosity: Gel
Safety: Refer to SDS 2669372
Shelf Life: 30 months unopened (stored at 2-8°C)
Limitations:
Do not use on dusty, dirty, or wet surfaces.
Not suitable for bonding polypropylene, polyethylene, PTFE, silicone rubber, glass, glazed surfaces, very soft leather, or foams.
Do not use for bonding items exposed to hot liquids or high temperatures for extended periods.
Optimum performance is achieved in dry conditions.
Storage:
Store in a cool, dry place, out of reach of children.
Why choose Glues Australia? We provide premium-quality adhesives like Loctite, backed by our exceptional customer service. With fast, reliable delivery across Australia, you’ll get the products you need when you need them. Shop confidently with Glues Australia, your trusted adhesive supplier!
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
A rapid dual-action adhesive system is specially designed to work on plastic to form resilient, invisible bonds in seconds.
Recommended on:
Plastic, Porcelain, Metal, Rubber, Leather, Wood, Paper.
Properties:
Bonds even difficult to bond plastics such as polyethylene (PE) and polypropylene (PP)
Bonds in seconds
Dries transparent
Easy to open, self-piercing and anti-clog cap
Suitable for use on most surfaces*
Solvent-free
* Except Styropor®, car glass and synthetic fibres.
Use:
Ensure surfaces to be joined are clean, completely dry and close fitting. Using the Surface Activator like a pen apply it to both surfaces and wait 60 seconds to dry.
Twist the glue cap clockwise until it locks, then unscrew in an anti-clockwise direction to open.
Carefully squeeze a small drop onto one surface. Press the surfaces together and hold until set.
Replace the cap immediately and store upright in a cool dry place.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
When you have a minute - tackle even big repairs with the new Loctite 60 seconds All-Purpose Glue. It is fast, strong and repositionable. Perfect results in only 60 seconds.
Recommended on:
Leather, Rubber, Wood, Metal, Porcelain, Paper, Plastic*.
Properties:
-Fast: it bonds materials within ca. 60 seconds
-Extra strong: it builds up a strength of 100+ kg/cm² within a short time
-Repositionable: it gives time to reposition the parts that you want to glue
-Ideal for all home repairs, even mid-size and large surfaces
-Non-drip gel formula, suitable for vertical applications
-It dries transparent
-Suitable for use on most surfaces*
-Solvent-free
-Perfectly bonds non-porous to non-porous materials
*Except polyethylene (PE), polypropylene (PP), PTFE, glass, Styropor® and synthetic fibres
Step by Step:
1.Ensure surfaces to be bonded are clean, completely dry and close-fitting.
2.Twist the cap/nozzle clockwise onto the tube and remove the cap.
3.Carefully apply the glue on one surface. Press the surfaces together, reposition it as you wish, then press with strong and even pressure for few seconds and leave it undisturbed for 60 seconds.
4.Clean the nozzle, replace the cap and store upright in a cool dry place.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Gorilla Tape To-Go
Handy 1" Roll
Convenient for on-the-go repairs, Gorilla Tape To-Go's 1 inch width packs a powerful grip in a portable size. With double-thick adhesive, tough reinforced backing and rugged weather-resistant shell, it sticks to rough and uneven surfaces, including wood, stone, stucco and brick, that ordinary tapes can't hold. This size is ideal size for backpacks, toolboxes, glove compartments for camping, boating and more.
Use like any other tape
Tear by hand or cut to size
Apply carefully smoothing out air pockets or rolls
That's it, enjoy the strength and durability of Gorilla Tape
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Gorilla Tape has taken duct tape to a new level. Gorilla Tape's toughness surpasses ordinary tapes, making the list of uses virtually endless. Made with double thick adhesive, strong reinforced backing, and a tough all-weather shell, it’s the biggest, strongest, toughest thing ever to happen to tape. It sticks to rough and uneven surfaces, including wood, stone, stucco and brick, that ordinary tapes can't hold. To us, it’s made the way tape should be: The Toughest on Planet Earth.
Directions
Use like any other tape. Tear Gorilla Tape by hand or cut to size with a knife or scissors. Apply the tape carefully, smoothing out any pockets or rolls. That’s it. Enjoy the strength and durability of Gorilla Tape!
Does freezing/thawing affect Gorilla Tape?
No, if Gorilla Tape freezes, it will work just fine once it returns to room temperature.
What temperature range does Gorilla Tape require?
Gorilla Tape works best at temperatures above 32°F (0°C). For best results, always apply the tape at room temperature.
How do I store Gorilla Tape?
To retain adhesive quality, store Gorilla Tape in a cool, dry place. Keep out of direct sunlight. Try storing the tape vertically (rather than laying flat), on a hook or on wax paper. If you have multiple rolls, keep your excess supply wrapped until they’re needed.
Can I remove Gorilla Tape?
Gorilla Tape can be removed, but with some difficulty and it may leave some residue. To remove any excess residue, we recommend using the tape itself as a blotter.
How do I use Gorilla Tape?
Surfaces should be clean and dust-free. We recommend rubbing the tape into the surface. This will help achieve a better bond.
Can it be used instead of electrical tape?
Gorilla Tape should not be used as electrical tape.
Will Gorilla Tape work on rough surfaces?
Yes! Gorilla Tape is designed to stick to rough surfaces including wood, stucco, plaster, brick, metal and more. Gorilla Tape is manufactured with a highly concentrated rubber based adhesive – two to three times as thick as traditional duct tape. The result is a tape that fills gaps and penetrates rough surfaces. It is important to clean the surface and brush off any loose particles and dirt before applying Gorilla Tape.
Who should buy Gorilla Tape?
Anyone who wants a quality tape that will last longer and holds stronger.
1. Do-it-yourselfers who know their labour justifies the use of better tools and materials.
2. Professionals who know quality materials affect a business reputation.
3. The “just-give-me-the-best” kind of person – someone with demanding applications or where re-taping is difficult.
Is Gorilla Tape waterproof?
We’ve found that Gorilla Tape will last a lot longer than regular duct tapes when it comes in contact with moisture. Make sure the surface is dry before you apply the tape, and we’re sure you’ll find this out for yourself.
Does Gorilla Tape use Gorilla Glue as the adhesive?
No, they are two different adhesives. Gorilla Glue is a polyurethane glue and the adhesive used on Gorilla Tape has been specially formulated for tape.
What’s the difference between Gorilla Tape and regular duct tape?
We took ordinary duct tape and made it better. We made it twice as thick and we use 2 to 3 times the amount of rubber based adhesive.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Gorilla Tape has taken duct tape to a new level. Gorilla Tape's toughness surpasses ordinary tapes, making the list of uses virtually endless. Made with double thick adhesive, strong reinforced backing, and a tough all-weather shell, it’s the biggest, strongest, toughest thing ever to happen to tape. It sticks to rough and uneven surfaces, including wood, stone, stucco and brick, that ordinary tapes can't hold. To us, it’s made the way tape should be: The Toughest on Planet Earth.
Directions
Use like any other tape. Tear Gorilla Tape by hand or cut to size with a knife or scissors. Apply the tape carefully, smoothing out any pockets or rolls. That’s it. Enjoy the strength and durability of Gorilla Tape!
Does freezing/thawing affect Gorilla Tape?
No, if Gorilla Tape freezes, it will work just fine once it returns to room temperature.
What temperature range does Gorilla Tape require?
Gorilla Tape works best at temperatures above 32°F (0°C). For best results, always apply the tape at room temperature.
How do I store Gorilla Tape?
To retain adhesive quality, store Gorilla Tape in a cool, dry place. Keep out of direct sunlight. Try storing the tape vertically (rather than laying flat), on a hook or on wax paper. If you have multiple rolls, keep your excess supply wrapped until they’re needed.
Can I remove Gorilla Tape?
Gorilla Tape can be removed, but with some difficulty and it may leave some residue. To remove any excess residue, we recommend using the tape itself as a blotter.
How do I use Gorilla Tape?
Surfaces should be clean and dust-free. We recommend rubbing the tape into the surface. This will help achieve a better bond.
Can it be used instead of electrical tape?
Gorilla Tape should not be used as electrical tape.
Will Gorilla Tape work on rough surfaces?
Yes! Gorilla Tape is designed to stick to rough surfaces including wood, stucco, plaster, brick, metal and more. Gorilla Tape is manufactured with a highly concentrated rubber based adhesive – two to three times as thick as traditional duct tape. The result is a tape that fills gaps and penetrates rough surfaces. It is important to clean the surface and brush off any loose particles and dirt before applying Gorilla Tape.
Who should buy Gorilla Tape?
Anyone who wants a quality tape that will last longer and holds stronger.
1. Do-it-yourselfers who know their labour justifies the use of better tools and materials.
2. Professionals who know quality materials affect a business reputation.
3. The “just-give-me-the-best” kind of person – someone with demanding applications or where re-taping is difficult.
Is Gorilla Tape waterproof?
We’ve found that Gorilla Tape will last a lot longer than regular duct tapes when it comes in contact with moisture. Make sure the surface is dry before you apply the tape, and we’re sure you’ll find this out for yourself.
Does Gorilla Tape use Gorilla Glue as the adhesive?
No, they are two different adhesives. Gorilla Glue is a polyurethane glue and the adhesive used on Gorilla Tape has been specially formulated for tape.
What’s the difference between Gorilla Tape and regular duct tape?
We took ordinary duct tape and made it better. We made it twice as thick and we use 2 to 3 times the amount of rubber based adhesive.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Gorilla Tape has taken duct tape to a new level. Gorilla Tape's toughness surpasses ordinary tapes, making the list of uses virtually endless. Made with double thick adhesive, strong reinforced backing, and a tough all-weather shell, it’s the biggest, strongest, toughest thing ever to happen to tape. It sticks to rough and uneven surfaces, including wood, stone, stucco and brick, that ordinary tapes can't hold. To us, it’s made the way tape should be: The Toughest on Planet Earth.
Directions
Use like any other tape. Tear Gorilla Tape by hand or cut to size with a knife or scissors. Apply the tape carefully, smoothing out any pockets or rolls. That’s it. Enjoy the strength and durability of Gorilla Tape!
Does freezing/thawing affect Gorilla Tape?
No, if Gorilla Tape freezes, it will work just fine once it returns to room temperature.
What temperature range does Gorilla Tape require?
Gorilla Tape works best at temperatures above 32°F (0°C). For best results, always apply the tape at room temperature.
How do I store Gorilla Tape?
To retain adhesive quality, store Gorilla Tape in a cool, dry place. Keep out of direct sunlight. Try storing the tape vertically (rather than laying flat), on a hook or on wax paper. If you have multiple rolls, keep your excess supply wrapped until they’re needed.
Can I remove Gorilla Tape?
Gorilla Tape can be removed, but with some difficulty and it may leave some residue. To remove any excess residue, we recommend using the tape itself as a blotter.
How do I use Gorilla Tape?
Surfaces should be clean and dust-free. We recommend rubbing the tape into the surface. This will help achieve a better bond.
Can it be used instead of electrical tape?
Gorilla Tape should not be used as electrical tape.
Will Gorilla Tape work on rough surfaces?
Yes! Gorilla Tape is designed to stick to rough surfaces including wood, stucco, plaster, brick, metal and more. Gorilla Tape is manufactured with a highly concentrated rubber based adhesive – two to three times as thick as traditional duct tape. The result is a tape that fills gaps and penetrates rough surfaces. It is important to clean the surface and brush off any loose particles and dirt before applying Gorilla Tape.
Who should buy Gorilla Tape?
Anyone who wants a quality tape that will last longer and holds stronger.
1. Do-it-yourselfers who know their labour justifies the use of better tools and materials.
2. Professionals who know quality materials affect a business reputation.
3. The “just-give-me-the-best” kind of person – someone with demanding applications or where re-taping is difficult.
Is Gorilla Tape waterproof?
We’ve found that Gorilla Tape will last a lot longer than regular duct tapes when it comes in contact with moisture. Make sure the surface is dry before you apply the tape, and we’re sure you’ll find this out for yourself.
Does Gorilla Tape use Gorilla Glue as the adhesive?
No, they are two different adhesives. Gorilla Glue is a polyurethane glue and the adhesive used on Gorilla Tape has been specially formulated for tape.
What’s the difference between Gorilla Tape and regular duct tape?
We took ordinary duct tape and made it better. We made it twice as thick and we use 2 to 3 times the amount of rubber based adhesive.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Gorilla Tape has taken duct tape to a new level. Gorilla Tape's toughness surpasses ordinary tapes, making the list of uses virtually endless. Made with double thick adhesive, strong reinforced backing, and a tough all-weather shell, it’s the biggest, strongest, toughest thing ever to happen to tape. It sticks to rough and uneven surfaces, including wood, stone, stucco and brick, that ordinary tapes can't hold. To us, it’s made the way tape should be: The Toughest on Planet Earth.
Directions
Use like any other tape. Tear Gorilla Tape by hand or cut to size with a knife or scissors. Apply the tape carefully, smoothing out any pockets or rolls. That’s it. Enjoy the strength and durability of Gorilla Tape!
Does freezing/thawing affect Gorilla Tape?
No, if Gorilla Tape freezes, it will work just fine once it returns to room temperature.
What temperature range does Gorilla Tape require?
Gorilla Tape works best at temperatures above 32°F (0°C). For best results, always apply the tape at room temperature.
How do I store Gorilla Tape?
To retain adhesive quality, store Gorilla Tape in a cool, dry place. Keep out of direct sunlight. Try storing the tape vertically (rather than laying flat), on a hook or on wax paper. If you have multiple rolls, keep your excess supply wrapped until they’re needed.
Can I remove Gorilla Tape?
Gorilla Tape can be removed, but with some difficulty and it may leave some residue. To remove any excess residue, we recommend using the tape itself as a blotter.
How do I use Gorilla Tape?
Surfaces should be clean and dust-free. We recommend rubbing the tape into the surface. This will help achieve a better bond.
Can it be used instead of electrical tape?
Gorilla Tape should not be used as electrical tape.
Will Gorilla Tape work on rough surfaces?
Yes! Gorilla Tape is designed to stick to rough surfaces including wood, stucco, plaster, brick, metal and more. Gorilla Tape is manufactured with a highly concentrated rubber based adhesive – two to three times as thick as traditional duct tape. The result is a tape that fills gaps and penetrates rough surfaces. It is important to clean the surface and brush off any loose particles and dirt before applying Gorilla Tape.
Who should buy Gorilla Tape?
Anyone who wants a quality tape that will last longer and holds stronger.
1. Do-it-yourselfers who know their labour justifies the use of better tools and materials.
2. Professionals who know quality materials affect a business reputation.
3. The “just-give-me-the-best” kind of person – someone with demanding applications or where re-taping is difficult.
Is Gorilla Tape waterproof?
We’ve found that Gorilla Tape will last a lot longer than regular duct tapes when it comes in contact with moisture. Make sure the surface is dry before you apply the tape, and we’re sure you’ll find this out for yourself.
Does Gorilla Tape use Gorilla Glue as the adhesive?
No, they are two different adhesives. Gorilla Glue is a polyurethane glue and the adhesive used on Gorilla Tape has been specially formulated for tape.
What’s the difference between Gorilla Tape and regular duct tape?
We took ordinary duct tape and made it better. We made it twice as thick and we use 2 to 3 times the amount of rubber based adhesive.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Crystal Clear Gorilla Tape features the adhesive strength of Gorilla Tape†, in a crystal clear tape that does not yellow outdoors. Made with a heavy duty adhesive layer and waterproof backing for extreme durability. This tape is UV and temperature resistant - great for projects and repairs both indoors and out. Crystal Clear Gorilla Tape can be applied to wet surfaces and also works under water.
PRODUCT FEATURES
CRYSTAL CLEAR: Non-Yellowing*
HEAVY DUTY: Extra Thick Adhesive
FLEXIBLE: Conforms
WORKS UNDERWATER**
UV, TEMPERATURE RESISTANT
*Long-term extreme heat will cause product to yellow
**Surfaces must be clean, smooth, non-porous, and water must be rubbed/pressed out from underneath tape. Not for use on applications under pressure or on seams. Overlapping tape may cause leaks.
Crystal Clear Gorilla Tape is best if used between -12°C and 49°C. To prevent fingerprints, clean your hands prior to using the tape and handle the tape only at edge. Use a straight edge (credit card or similar object), to press out fingerprints.For best results, apply the tape to a clean surface. Airtight patches are best achieved on smooth, dry surfaces with the tape on both sides of the repair (when accessible).
Tape size should be larger than the repair area, extending beyond all edges.
Rub the entire surface of the tape aggressively, especially the edges.
NOTE: Surface patch will gain additional strength with time. Crystal Clear Gorilla Tape works best for patching with a single layer. Not for patching inflatables at seams.
WARNING: AT RISK OF BODILY HARM, DO NOT USE ON PERSONAL SAFETY DEVICES.
Store the tape in the original packaging to prevent edge dirt and debris. Store it in a cool, dry place.
TECHNICAL SPECS
APPLICATION TEMPERATURE – -12°C to 49°C, best at room temperature
SERVICE TEMPERATURE – -20°C to 60°C
OUTDOOR – Yes
MOISTURE RESISTANT – Yes
STORAGE TIPS – Store in a cool, dry location. Store in original package to prevent edge dirt and debris.
FAQS
What’s the difference between Crystal Clear Gorilla Tape and other tapes?
Crystal Clear Gorilla Tape is a heavy-duty, all-purpose tape that is weatherproof, air tight, crystal clear, and can be torn by hand (that’s right—no dispenser needed!). Crystal Clear Gorilla Tape is ideal for thousands of uses and sticks to almost everything—the uses are virtually endless. It can be used for patching smooth surfaces, it sticks to rough & uneven surfaces and can even be used to seal and protect surfaces.
Will Crystal Clear Gorilla Tape work on plastic/vinyl/rubber?
Yes, Crystal Clear Gorilla Tape should work well on these surfaces.
Is Crystal Clear Gorilla Tape food safe?
Crystal Clear Gorilla Tape is not recommended for direct or indirect food contact and should not be considered food safe.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Its high strength and quick set time make Gorilla Super Glue the go-to for a variety of household projects. Developed for long-lasting repairs in an instant, Gorilla Super Glue dries in 10–30 seconds and is reinforced with rubber for increased impact resistance. We call it Impact-Tough® because it stands up to wear and tear unlike any other instant glue. In addition to its high-performance formula, we’ve added an anti-clog cap with a metal pin inside to ensure an airtight seal for maximum reusability. It’s Gorilla tough, every time.
Clamp Time: 10-30 Seconds // Open Time: Not Repositionable
Dry Time: Light Handling after 1-5 Minutes // Dry Color: Translucent
Full Cure: 24 Hours
DIRECTIONS
Protect Work Area From Spills
Clean and Dry Surfaces to Be Bonded
Apply Gorilla Super Glue
Apply a small amount of Gorilla® Super Glue to one surface. Excess glue can cause delayed or failed bond. One drop covers one square inch.
Secure
Press two surfaces together for 10-30 seconds to achieve bond. Note that gaps and uneven surfaces may cause delayed bonding.
Fast-acting solutions for quick repairs and production tasks. Great for small parts and close-fit joints; consider gels for vertical surfaces. Use filters to refine by chemistry and set time. Always check the product page and TDS/SDS.
![Waxstix Timber repair wax touch-up crayons [Baltic Pine]](http://gluesaustralia.com.au/cdn/shop/files/9315284510000.png?v=1754724098&width=645)
![Waxstix Timber repair wax touch-up crayons [Cedar]](http://gluesaustralia.com.au/cdn/shop/files/9315284510017.png?v=1754724098&width=645)
![T-Rex Ferociously Strong Tape UV Resistant With Knit Cloth [9.14m]](http://gluesaustralia.com.au/cdn/shop/files/075353964668N_2b5bb515-b170-4a54-a924-8fcf58683e02.jpg?v=1754716416&width=645)
![T-Rex Ferociously Strong Tape UV Resistant With Knit Cloth [9.14m]](http://gluesaustralia.com.au/cdn/shop/files/04007_14cbee25-54b9-43ad-a832-e4231871625b.jpg?v=1754716416&width=645)
![T-Rex Ferociously Strong Tape UV Resistant With Knit Cloth [27.4m]](http://gluesaustralia.com.au/cdn/shop/files/040074023437N_e5aad737-db85-4e62-bf16-291c599f76e3.jpg?v=1754716410&width=645)
![T-Rex Ferociously Strong Tape UV Resistant With Knit Cloth [27.4m]](http://gluesaustralia.com.au/cdn/shop/files/04007_dddd7c02-55b5-4bc6-ae35-61e0db1a57f7.jpg?v=1754716410&width=645)
![Tommy Tape Self Fusing Silicone Tape Seals And Repairs Waterproof Insulates [White x 3m]](http://gluesaustralia.com.au/cdn/shop/files/9315284530329_412e3d45-40a8-4eca-9ed6-191f389472d4.jpg?v=1754716380&width=645)
![Tommy Tape Self Fusing Silicone Tape Seals And Repairs Waterproof Insulates [White x 3m]](http://gluesaustralia.com.au/cdn/shop/files/93152845_0ee281c8-0366-40a5-bb6c-b1a12d613ac2.png?v=1754716380&width=645)
![Tommy Tape Self Fusing Silicone Tape Seals And Repairs Waterproof Insulates [Black x 3m]](http://gluesaustralia.com.au/cdn/shop/files/9315284530305_0485e2cc-4f7e-46c2-94ae-dee297210481.jpg?v=1754716346&width=645)
![Tommy Tape Self Fusing Silicone Tape Seals And Repairs Waterproof Insulates [Black x 3m]](http://gluesaustralia.com.au/cdn/shop/files/93152845_50821584-e9cf-45b6-9528-1e997cfe48d7.png?v=1754716346&width=645)
![Gorilla Tape Incredibly Strong Extra Thick Weather Resistant 9.1m x 48mm [White]](http://gluesaustralia.com.au/cdn/shop/files/052427601001N_6bf5df2b-2379-4b95-849b-de69b5185a52.jpg?v=1754712477&width=645)
![Gorilla Tape Incredibly Strong Extra Thick Weather Resistant 32m x 48mm [Silver]](http://gluesaustralia.com.au/cdn/shop/files/052427607409N_5d23d9cf-9af4-4971-af36-316c7ce35662.jpg?v=1754712479&width=645)
![Gorilla Tape Incredibly Strong Extra Thick Weather Resistant 27.4m x 48mm [White]](http://gluesaustralia.com.au/cdn/shop/files/052427840585N_07d2cff7-275f-4461-91ba-a3bace52b8c5.jpg?v=1754712482&width=645)
![Gorilla Tape Incredibly Strong Extra Thick Weather Resistant 11m x 48mm [Silver]](http://gluesaustralia.com.au/cdn/shop/files/052427607126N_cffee80a-3f6c-4f18-ab8b-4a06da2ea9e8.jpg?v=1754712484&width=645)
![Waxstix Timber repair wax touch-up crayons [Baltic Pine]](//gluesaustralia.com.au/cdn/shop/files/9315284510000.png?v=1754724098&width=645)
![Waxstix Timber repair wax touch-up crayons [Cedar]](//gluesaustralia.com.au/cdn/shop/files/9315284510017.png?v=1754724098&width=645)
![T-Rex Ferociously Strong Tape UV Resistant With Knit Cloth [9.14m]](//gluesaustralia.com.au/cdn/shop/files/075353964668N_2b5bb515-b170-4a54-a924-8fcf58683e02.jpg?v=1754716416&width=645)
![T-Rex Ferociously Strong Tape UV Resistant With Knit Cloth [9.14m]](//gluesaustralia.com.au/cdn/shop/files/04007_14cbee25-54b9-43ad-a832-e4231871625b.jpg?v=1754716416&width=645)
![T-Rex Ferociously Strong Tape UV Resistant With Knit Cloth [27.4m]](//gluesaustralia.com.au/cdn/shop/files/040074023437N_e5aad737-db85-4e62-bf16-291c599f76e3.jpg?v=1754716410&width=645)
![T-Rex Ferociously Strong Tape UV Resistant With Knit Cloth [27.4m]](//gluesaustralia.com.au/cdn/shop/files/04007_dddd7c02-55b5-4bc6-ae35-61e0db1a57f7.jpg?v=1754716410&width=645)
![Tommy Tape Self Fusing Silicone Tape Seals And Repairs Waterproof Insulates [White x 3m]](//gluesaustralia.com.au/cdn/shop/files/9315284530329_412e3d45-40a8-4eca-9ed6-191f389472d4.jpg?v=1754716380&width=645)
![Tommy Tape Self Fusing Silicone Tape Seals And Repairs Waterproof Insulates [White x 3m]](//gluesaustralia.com.au/cdn/shop/files/93152845_0ee281c8-0366-40a5-bb6c-b1a12d613ac2.png?v=1754716380&width=645)
![Tommy Tape Self Fusing Silicone Tape Seals And Repairs Waterproof Insulates [Black x 3m]](//gluesaustralia.com.au/cdn/shop/files/9315284530305_0485e2cc-4f7e-46c2-94ae-dee297210481.jpg?v=1754716346&width=645)
![Tommy Tape Self Fusing Silicone Tape Seals And Repairs Waterproof Insulates [Black x 3m]](//gluesaustralia.com.au/cdn/shop/files/93152845_50821584-e9cf-45b6-9528-1e997cfe48d7.png?v=1754716346&width=645)
![Gorilla Tape Incredibly Strong Extra Thick Weather Resistant 9.1m x 48mm [White]](//gluesaustralia.com.au/cdn/shop/files/052427601001N_6bf5df2b-2379-4b95-849b-de69b5185a52.jpg?v=1754712477&width=645)
![Gorilla Tape Incredibly Strong Extra Thick Weather Resistant 32m x 48mm [Silver]](//gluesaustralia.com.au/cdn/shop/files/052427607409N_5d23d9cf-9af4-4971-af36-316c7ce35662.jpg?v=1754712479&width=645)
![Gorilla Tape Incredibly Strong Extra Thick Weather Resistant 27.4m x 48mm [White]](//gluesaustralia.com.au/cdn/shop/files/052427840585N_07d2cff7-275f-4461-91ba-a3bace52b8c5.jpg?v=1754712482&width=645)
![Gorilla Tape Incredibly Strong Extra Thick Weather Resistant 11m x 48mm [Silver]](//gluesaustralia.com.au/cdn/shop/files/052427607126N_cffee80a-3f6c-4f18-ab8b-4a06da2ea9e8.jpg?v=1754712484&width=645)
