🌍 Worldwide Shipping Available | Fast & Secure Delivery ✈️

Prep Productions

58 products

  • Prep Multipurpose Quick Drying Wood Filler Putty Water Based 250g [Brush-Box] Prep Multipurpose Quick Drying Wood Filler Putty Water Based 250g [Cedar]

    Prep Productions Prep Multipurpose Quick Drying Wood Filler Putty Water Based

    In Stock  Express Post: 1-3 Days | Standard Post: 2-5 Days

    Water-based interior wood filler suitable for all timber types and timber by-products. Once set, the wood filler can be sanded, screwed, and nailed. The wood filler is suitable for filling cracks, holes, end grain, and edges. For exterior use, protect with a suitable exterior grade finish (e.g. paint or stain) Features & Benefits Environmentally friendly Dries quickly Water clean up Easy to use Long shelf-life; if filler hardens just add drops of water & mix Multi-purpose, 4 in 1 uses – fills nails holes, takes stain or paint easily, repairs gouges & chips and crack & edge filler

    In Stock  Express Post: 1-3 Days | Standard Post: 2-5 Days

    $12.95 - $39.72

  • Last stock! Prep Plaster Filler Interior Exterior White Finish Non-Shrink 500g

    Prep Productions Prep Plaster Filler Interior Exterior White Finish Non-Shrink 500g

    In Stock  Express Post: 1-3 Days | Standard Post: 2-5 Days

    Prep Interior & Exterior is a dry, plaster based, cement reinforced filler for the repair of common non-flexible wall linings such as plaster, concrete, timber, and wallboard. This product is highly water-resistant and therefore suitable for interior or exterior use. Can be used to fill deep or shallow crevices in one application. Easy to mix and use White finish Non-shrinking Easily sanded Can be nailed or screwed when dry Water-resistant

    In Stock  Express Post: 1-3 Days | Standard Post: 2-5 Days

    $7.50

  • Prep Multi-Use Adhesive Superseeds PVA Non Toxic Dries Clear 4L

    Prep Productions Prep Multi-Use Adhesive Superseeds PVA Non Toxic Dries Clear 4L

    In Stock  Express Post: 1-3 Days | Standard Post: 2-5 Days

    PREP Multi-Use adhesive is a styrene-based all-purpose adhesive, originally designed to replace PVA adhesives. Unlike conventional adhesives, PREP offers multiple solutions in one bottle. PREP Multi-Use adhesive will glue almost anything to anything Features and Benefits: Environmentally friendly Non-toxic Dries quickly – dries clear Non-flammable High water resistance Prep MultiUse Adhesive is a styrene-based all-purpose adhesive, originally designed to replace PVA adhesives. Unlike conventional adhesive, Prep offers multiple solutions in one bottle. Prep Multi-Use Adhesive will bond almost anything to anything. Bond strength is greatest on porous surfaces such as timber, fabric, leather, paper, styrene foam, metal, wood and glass, even concrete, plaster, and fibro.  Prep MultiUse Adhesiveis also a suitable adhesive for non-porous surfaces such as steel, aluminum, brass, copper, ceramics, and glass. It will not re-emulsify nor dissolve if subject to water after drying like PVA’s. Prep MultiUse Adhesiveis a thicker emulsion than PVA’s so it doesn’t drip on vertical surfaces. It has greater bond strength on most surfaces. Prep MultiUse Adhesivemay also be diluted, for use as a ‘dust sealer or primer/sealer’ for concrete and masonry surfaces. It may be used diluted as a bonding agent between layers of concrete or in the mix.

    In Stock  Express Post: 1-3 Days | Standard Post: 2-5 Days

    $68.31

  • Prep Multi-Use Adhesive Superseeds PVA Non Toxic Dries Clear 250ml

    Prep Productions Prep Multi-Use Adhesive Superseeds PVA Non Toxic Dries Clear 250ml

    In Stock  Express Post: 1-3 Days | Standard Post: 2-5 Days

    PREP Multi-Use adhesive is a styrene-based all-purpose adhesive, originally designed to replace PVA adhesives. Unlike conventional adhesives, PREP offers multiple solutions in one bottle. PREP Multi-Use adhesive will glue almost anything to anything Features and Benefits: Environmentally friendly Non-toxic Dries quickly – dries clear Non-flammable High water resistance Prep MultiUse Adhesive is a styrene-based all-purpose adhesive, originally designed to replace PVA adhesives. Unlike conventional adhesive, Prep offers multiple solutions in one bottle. Prep Multi-Use Adhesive will bond almost anything to anything. Bond strength is greatest on porous surfaces such as timber, fabric, leather, paper, styrene foam, metal, wood and glass, even concrete, plaster, and fibro.  Prep MultiUse Adhesiveis also a suitable adhesive for non-porous surfaces such as steel, aluminum, brass, copper, ceramics, and glass. It will not re-emulsify nor dissolve if subject to water after drying like PVA’s. Prep MultiUse Adhesiveis a thicker emulsion than PVA’s so it doesn’t drip on vertical surfaces. It has greater bond strength on most surfaces. Prep MultiUse Adhesivemay also be diluted, for use as a ‘dust sealer or primer/sealer’ for concrete and masonry surfaces. It may be used diluted as a bonding agent between layers of concrete or in the mix.

    In Stock  Express Post: 1-3 Days | Standard Post: 2-5 Days

    $11.52

  • Quickset Watercrete Multi Purpose Patching Cement Sets Underwater 750g

    Prep Productions Quickset Watercrete Multi Purpose Patching Cement Sets Underwater 750g

    In Stock  Express Post: 1-3 Days | Standard Post: 2-5 Days

    Quickset WATERCRETE Is a unique product that provides a simple, fast, concrete solution to a multitude of awkward repair problems large and small…from re-forming grating ledges to repairing the Owen Falls Dam in Uganda. Quickset WATERCRETE is a multi purpose patching cement that sets in five minutes …even underwater! Bonds to concrete, masonry, wood, steel and glass fibre. Quickset WATERCRETE is an all purpose patching and bonding compound which is very effective where the presence of water makes repairing and sealing difficult. It will repair leaks in pools, tanks and bonds earth ware pipes and tiles, without the need to drain the water. It is ideal for repairs in wet or dry situations where delays are inconvenient as it can be walked on, or driven over in 30 minutes. Quickset WATERCRETE is a fast setting, high compressive strength compound that shows its initial set in 4-6 minutes, even underwater. It reaches maximum compressive strength in 24 hours and bonds to CLEAN CONCRETE, MASONRY, STONE, TIMBER and STEEL. Contains no calcium chloride. It is suitable for use with drinking water. BRIEF TECHNICAL SPECIFICATIONS  Initial set 5 minutes. Curing set 15-30 minutes.  Compressive strength of 2,000psi or greater in 24 hours  Maximum strength in 28 days  Non-toxic  Volume change: Expansion after 24 hours 0.1%  Contraction after 28 days 0.01%  Water absorption 1.7% after 14 days  Factory Production to BS 5750 Part II BONDS TO:  CEMENT  TIMBER  MASONRY  FIBREGLASS  STEEL INSTRUCTIONS FOR USE Remove all loose material from the area to be treated to ensure a solid bond. Slowly add one part of water to 4 parts Quickset WATERCRETE and mix for 1 to 2 minutes to the CONSISTENCY OF PUTTY. Add more product if mix is too wet as wet mix seriously reduces effectiveness. Avoid contact with skin. Press the mix firmly into the prepared area. The product can be moulded to shape. When filling a hole against running water, hold the mixed product in position with a trowel or piece of timber until it cures. The product hardens rapidly after 4 minutes. If sealing a leak underwater, increase the size of the hole on the surface to create a taper. Before applying Quickset WATERCRETE to dry work, generously soak the location with water. Damp conditions assist curing. For repairs less than 1.5cms thick in a dry situation, it is best kept damp for 24 hours.

    In Stock  Express Post: 1-3 Days | Standard Post: 2-5 Days

    $25.95

  • Prep Multi-Use Adhesive Superseeds PVA Non Toxic Dries Clear 1L

    Prep Productions Prep Multi-Use Adhesive Superseeds PVA Non Toxic Dries Clear 1L

    In Stock  Express Post: 1-3 Days | Standard Post: 2-5 Days

    PREP Multi-Use adhesive is a styrene-based all-purpose adhesive, originally designed to replace PVA adhesives. Unlike conventional adhesives, PREP offers multiple solutions in one bottle. PREP Multi-Use adhesive will glue almost anything to anything Features and Benefits: Environmentally friendly Non-toxic Dries quickly – dries clear Non-flammable High water resistance Prep MultiUse Adhesive is a styrene-based all-purpose adhesive, originally designed to replace PVA adhesives. Unlike conventional adhesive, Prep offers multiple solutions in one bottle. Prep Multi-Use Adhesive will bond almost anything to anything. Bond strength is greatest on porous surfaces such as timber, fabric, leather, paper, styrene foam, metal, wood and glass, even concrete, plaster, and fibro.  Prep MultiUse Adhesiveis also a suitable adhesive for non-porous surfaces such as steel, aluminum, brass, copper, ceramics, and glass. It will not re-emulsify nor dissolve if subject to water after drying like PVA’s. Prep MultiUse Adhesiveis a thicker emulsion than PVA’s so it doesn’t drip on vertical surfaces. It has greater bond strength on most surfaces. Prep MultiUse Adhesivemay also be diluted, for use as a ‘dust sealer or primer/sealer’ for concrete and masonry surfaces. It may be used diluted as a bonding agent between layers of concrete or in the mix.

    In Stock  Express Post: 1-3 Days | Standard Post: 2-5 Days

    $26.95

  • Prep Marathon Scale And Rust Remover 2L

    Prep Productions Prep Marathon Scale And Rust Remover 2L

    In Stock  Express Post: 1-3 Days | Standard Post: 2-5 Days

    Marathon Scale and Rust Remover CONCENTRATED 2L Bottle Tough on calcium, rust and scale deposits.  Ideal to use on tiles, porcelain, sinks, showers and baths

    In Stock  Express Post: 1-3 Days | Standard Post: 2-5 Days

    $7.00

  • Last stock! Quickset Watercrete Multi Purpose Patching Cement Sets Underwater 10Kg

    Prep Productions Quickset Watercrete Multi Purpose Patching Cement Sets Underwater 10Kg

    In Stock  Express Post: 1-3 Days | Standard Post: 2-5 Days

    Quickset WATERCRETE Is a unique product that provides a simple, fast, concrete solution to a multitude of awkward repair problems large and small…from re-forming grating ledges to repairing the Owen Falls Dam in Uganda. Quickset WATERCRETE is a multi purpose patching cement that sets in five minutes …even underwater! Bonds to concrete, masonry, wood, steel and glass fibre. Quickset WATERCRETE is an all purpose patching and bonding compound which is very effective where the presence of water makes repairing and sealing difficult. It will repair leaks in pools, tanks and bonds earth ware pipes and tiles, without the need to drain the water. It is ideal for repairs in wet or dry situations where delays are inconvenient as it can be walked on, or driven over in 30 minutes. Quickset WATERCRETE is a fast setting, high compressive strength compound that shows its initial set in 4-6 minutes, even underwater. It reaches maximum compressive strength in 24 hours and bonds to CLEAN CONCRETE, MASONRY, STONE, TIMBER and STEEL. Contains no calcium chloride. It is suitable for use with drinking water. BRIEF TECHNICAL SPECIFICATIONS  Initial set 5 minutes. Curing set 15-30 minutes.  Compressive strength of 2,000psi or greater in 24 hours  Maximum strength in 28 days  Non-toxic  Volume change: Expansion after 24 hours 0.1%  Contraction after 28 days 0.01%  Water absorption 1.7% after 14 days  Factory Production to BS 5750 Part II BONDS TO:  CEMENT  TIMBER  MASONRY  FIBREGLASS  STEEL INSTRUCTIONS FOR USE Remove all loose material from the area to be treated to ensure a solid bond. Slowly add one part of water to 4 parts Quickset WATERCRETE and mix for 1 to 2 minutes to the CONSISTENCY OF PUTTY. Add more product if mix is too wet as wet mix seriously reduces effectiveness. Avoid contact with skin. Press the mix firmly into the prepared area. The product can be moulded to shape. When filling a hole against running water, hold the mixed product in position with a trowel or piece of timber until it cures. The product hardens rapidly after 4 minutes. If sealing a leak underwater, increase the size of the hole on the surface to create a taper. Before applying Quickset WATERCRETE to dry work, generously soak the location with water. Damp conditions assist curing. For repairs less than 1.5cms thick in a dry situation, it is best kept damp for 24 hours.

    In Stock  Express Post: 1-3 Days | Standard Post: 2-5 Days

    $165.00

  • Prep Plastermate External Blue Board Fibre Cement Tape 50m

    Prep Productions Prep Plastermate External Blue Board Fibre Cement Tape 50m

    In Stock  Express Post: 1-3 Days | Standard Post: 2-5 Days

    Manufactured from special fibred paper with added tensile strength. Buffed on both sides to ensure optimum bonding and holding power. Perforated for ease of use and better adhesion. Easy to use DIY with professional results Strong bonding and holding power Self adhesive Quick results

    In Stock  Express Post: 1-3 Days | Standard Post: 2-5 Days

    $13.95

  • Last stock! Prep Plaster Of Paris For Sculpting Casting Easy to Shape Dries White 1Kg

    Prep Productions Prep Plaster Of Paris For Sculpting Casting Easy to Shape Dries White 1Kg

    In Stock  Express Post: 1-3 Days | Standard Post: 2-5 Days

    Ideal for craft, PREP Plaster of Paris can be used for sculpting, casting, and many other applications. Once set, it can be sanded, drilled, and chiseled to the required shape and size, then painted and kiln-dried. Environmentally friendly Dries white Dries fast Very high weather resistance Unique properties make this product easy to shape and sand Ideal for schools and craft classes or just having fun!

    In Stock  Express Post: 1-3 Days | Standard Post: 2-5 Days

    $9.35

  • Last stock! Prep Plaster Of Paris For Sculpting Casting Easy to Shape Dries White 10Kg

    Prep Productions Prep Plaster Of Paris For Sculpting Casting Easy to Shape Dries White 10Kg

    In Stock  Express Post: 1-3 Days | Standard Post: 2-5 Days

    Ideal for craft, PREP Plaster of Paris can be used for sculpting, casting, and many other applications. Once set, it can be sanded, drilled, and chiseled to the required shape and size, then painted and kiln-dried. Environmentally friendly Dries white Dries fast Very high weather resistance Unique properties make this product easy to shape and sand Ideal for schools and craft classes or just having fun!

    In Stock  Express Post: 1-3 Days | Standard Post: 2-5 Days

    $39.15

  • Prep Plaster Filler Interior Exterior White Finish Non-Shrink 5Kg

    Prep Productions Prep Plaster Filler Interior Exterior White Finish Non-Shrink 5Kg

    In Stock  Express Post: 1-3 Days | Standard Post: 2-5 Days

    Prep Interior & Exterior is a dry, plaster based, cement reinforced filler for the repair of common non-flexible wall linings such as plaster, concrete, timber, and wallboard. This product is highly water-resistant and therefore suitable for interior or exterior use. Can be used to fill deep or shallow crevices in one application. Easy to mix and use White finish Non-shrinking Easily sanded Can be nailed or screwed when dry Water-resistant

    In Stock  Express Post: 1-3 Days | Standard Post: 2-5 Days

    $46.50

  • Last stock! Prep Plaster Filler Interior Exterior White Finish Non-Shrink 2Kg

    Prep Productions Prep Plaster Filler Interior Exterior White Finish Non-Shrink 2Kg

    In Stock  Express Post: 1-3 Days | Standard Post: 2-5 Days

    Prep Interior & Exterior is a dry, plaster based, cement reinforced filler for the repair of common non-flexible wall linings such as plaster, concrete, timber, and wallboard. This product is highly water-resistant and therefore suitable for interior or exterior use. Can be used to fill deep or shallow crevices in one application. Easy to mix and use White finish Non-shrinking Easily sanded Can be nailed or screwed when dry Water-resistant

    In Stock  Express Post: 1-3 Days | Standard Post: 2-5 Days

    $28.90

  • Prep Plaster Filler Interior Exterior White Finish Non-Shrink 200g

    Prep Productions Prep Plaster Filler Interior Exterior White Finish Non-Shrink 200g

    In Stock  Express Post: 1-3 Days | Standard Post: 2-5 Days

    Prep Interior & Exterior is a dry, plaster based, cement reinforced filler for the repair of common non-flexible wall linings such as plaster, concrete, timber, and wallboard. This product is highly water-resistant and therefore suitable for interior or exterior use. Can be used to fill deep or shallow crevices in one application. Easy to mix and use White finish Non-shrinking Easily sanded Can be nailed or screwed when dry Water-resistant

    In Stock  Express Post: 1-3 Days | Standard Post: 2-5 Days

    $4.43

  • Prep Organoil Beeswax Polish 200g

    Prep Productions Prep Organoil Beeswax Polish 200g

    In Stock  Express Post: 1-3 Days | Standard Post: 2-5 Days

    Polishes internal furniture & joinery that has been previously waxed or oiled. Rejuvenates french polished/lacquered items and leather items. Also suitable for sealing and polishing slate, terracotta and stucco Coverage: Up to 40 m2 Number of Coats: 2 Recoat: 24hrs Sheen Level: Pale Satin

    In Stock  Express Post: 1-3 Days | Standard Post: 2-5 Days

    $15.95

  • Prep Multi-Use Adhesive Superseeds PVA Non Toxic Dries Clear 500ml

    Prep Productions Prep Multi-Use Adhesive Superseeds PVA Non Toxic Dries Clear 500ml

    In Stock  Express Post: 1-3 Days | Standard Post: 2-5 Days

    PREP Multi-Use adhesive is a styrene-based all-purpose adhesive, originally designed to replace PVA adhesives. Unlike conventional adhesives, PREP offers multiple solutions in one bottle. PREP Multi-Use adhesive will glue almost anything to anything Features and Benefits: Environmentally friendly Non-toxic Dries quickly – dries clear Non-flammable High water resistance Prep MultiUse Adhesive is a styrene-based all-purpose adhesive, originally designed to replace PVA adhesives. Unlike conventional adhesive, Prep offers multiple solutions in one bottle. Prep Multi-Use Adhesive will bond almost anything to anything. Bond strength is greatest on porous surfaces such as timber, fabric, leather, paper, styrene foam, metal, wood and glass, even concrete, plaster, and fibro.  Prep MultiUse Adhesiveis also a suitable adhesive for non-porous surfaces such as steel, aluminum, brass, copper, ceramics, and glass. It will not re-emulsify nor dissolve if subject to water after drying like PVA’s. Prep MultiUse Adhesiveis a thicker emulsion than PVA’s so it doesn’t drip on vertical surfaces. It has greater bond strength on most surfaces. Prep MultiUse Adhesivemay also be diluted, for use as a ‘dust sealer or primer/sealer’ for concrete and masonry surfaces. It may be used diluted as a bonding agent between layers of concrete or in the mix.

    In Stock  Express Post: 1-3 Days | Standard Post: 2-5 Days

    $19.95

  • Last stock! Prep Multi-Use Adhesive Superseeds PVA Non Toxic Dries Clear 125ml

    Prep Productions Prep Multi-Use Adhesive Superseeds PVA Non Toxic Dries Clear 125ml

    In Stock  Express Post: 1-3 Days | Standard Post: 2-5 Days

    PREP Multi-Use adhesive is a styrene-based all-purpose adhesive, originally designed to replace PVA adhesives. Unlike conventional adhesives, PREP offers multiple solutions in one bottle. PREP Multi-Use adhesive will glue almost anything to anything Features and Benefits: Environmentally friendly Non-toxic Dries quickly – dries clear Non-flammable High water resistance Prep MultiUse Adhesive is a styrene-based all-purpose adhesive, originally designed to replace PVA adhesives. Unlike conventional adhesive, Prep offers multiple solutions in one bottle. Prep Multi-Use Adhesive will bond almost anything to anything. Bond strength is greatest on porous surfaces such as timber, fabric, leather, paper, styrene foam, metal, wood and glass, even concrete, plaster, and fibro.  Prep MultiUse Adhesiveis also a suitable adhesive for non-porous surfaces such as steel, aluminum, brass, copper, ceramics, and glass. It will not re-emulsify nor dissolve if subject to water after drying like PVA’s. Prep MultiUse Adhesiveis a thicker emulsion than PVA’s so it doesn’t drip on vertical surfaces. It has greater bond strength on most surfaces. Prep MultiUse Adhesivemay also be diluted, for use as a ‘dust sealer or primer/sealer’ for concrete and masonry surfaces. It may be used diluted as a bonding agent between layers of concrete or in the mix.

    In Stock  Express Post: 1-3 Days | Standard Post: 2-5 Days

    $8.12

  • Last stock! Prep Multi-Purpose Interior & Exterior Filler 2Kg

    Prep Productions Prep Multi-Purpose Interior & Exterior Filler 2Kg

    In Stock  Express Post: 1-3 Days | Standard Post: 2-5 Days

    A ready-mixed heavy duty bonded filler for filling holes internally and externally. PREP Multi-Purpose Filler can be used to fill holes in concrete, cement, brickwork, timber and plasterboard, as well as many other porous substrates. Easy to use Can be tinted Ready-mixed Interior & exterior Environmentally friendly Heavy-duty bonded filler Ideal for floors, walls, ceilings, roofs

    In Stock  Express Post: 1-3 Days | Standard Post: 2-5 Days

    $33.95

  • Prep Mould Defence Addittive 20ml

    Prep Productions Prep Mould Defence Addittive 20ml -Add 5mL per L of Paint/Stain/Oil

    In Stock  Express Post: 1-3 Days | Standard Post: 2-5 Days

    A powerful long-lasting mould inhibitor (when added to an existing product e.g. paint) which inhibits the unsightly growth of mould on to the surface it is applied to. Mould Defence forms an enduring film that will not change the look or feel of the substrate to which it is applied.   Mould Defence is recommended to be used in areas where high moisture is present e.g. bathroom, laundries and kitchens, however, for peace of mind, can be used throughout the whole house.   Mould Defence can be added to a wide range of products including paint (water based and solvent), timber oils/stains, textured coatings, grout, mortar and adhesive.   Add 5mL per L of paint/stain/oil or 5mL per Kg of RTU product.

    In Stock  Express Post: 1-3 Days | Standard Post: 2-5 Days

    $9.33

  • Prep Mould Defence Additive 1L

    Prep Productions Prep Mould Defence Additive 1L -Add 5mL per L of Paint/Stain/Oil

    In Stock  Express Post: 1-3 Days | Standard Post: 2-5 Days

    A powerful long-lasting mould inhibitor (when added to an existing product e.g. paint) which inhibits the unsightly growth of mould on to the surface it is applied to. Mould Defence forms an enduring film that will not change the look or feel of the substrate to which it is applied. Mould Defence is recommended to be used in areas where high moisture is present e.g. bathroom, laundries and kitchens, however, for peace of mind, can be used throughout the whole house. Mould Defence can be added to a wide range of products including paint (water based and solvent), timber oils/stains, textured coatings, grout, mortar and adhesive. Add 5mL per L of paint/stain/oil or 5mL per Kg of RTU product.

    In Stock  Express Post: 1-3 Days | Standard Post: 2-5 Days

    $185.00

  • Last stock! Prep Ecowood Oil Woodwipe Rejuvenate Wooden Items 250ml

    Prep Productions Prep Ecowood Oil Woodwipe Rejuvenate Wooden Items 250ml

    In Stock  Express Post: 1-3 Days | Standard Post: 2-5 Days

    A blend of nut and citrus oils specially formulated to create a drying oil to maintain and rejuvenate wooden items that come into regular contact with food or water which can cause the timber to swell and dry out. Simple wipe on and wipe off application to make timber look & feel nourished.     Maintain wood items that come in contact with food & water. Ideal for wooden chopping boards, serving bowls and utensils.   250mL     Simple wipe on and wipe off with a rag

    In Stock  Express Post: 1-3 Days | Standard Post: 2-5 Days

    $16.88

  • Prep Borax Multi-Purpose Cleaner and Deodoriser 800g

    Prep Productions Prep Borax Multi-Purpose Cleaner and Deodoriser 800g

    In Stock  Express Post: 1-3 Days | Standard Post: 2-5 Days

    Multi-Purpose Cleaner and Deodorizer Natural Minerals easily dissolve in water Directions: Test on an inconspicuous area first Borax can be used in powder form for tea and coffee cup stains General cleaning 1-table spoon to 4.5 Litres of warm water (also woollens and blankets) Enamel surfaces 4 tablespoons to 4.5 Litres of warm water (refrigerators, stoves, sinks, baths & tiles Uses: General cleaning, stain remover, deodorizer  

    In Stock  Express Post: 1-3 Days | Standard Post: 2-5 Days

    $9.47

  • Prep Marathon Carpet Stain Remover 500ml

    Prep Productions Prep Marathon Carpet Stain Remover 500ml

    In Stock  Express Post: 1-3 Days | Standard Post: 2-5 Days

    Directions: Spray affected area Allow penetrating for 5 to 10 minutes with a damp cloth Wipe over Allow drying Uses: Household, motor vehicles, boating & office carpets

    In Stock  Express Post: 1-3 Days | Standard Post: 2-5 Days

    $4.00

  • Last stock! Prep Endeavour QuickDeck Water Based Decking Oil Fast Drying Low VOC 10L

    Prep Productions Prep Endeavour QuickDeck Water Based Decking Oil Fast Drying Low VOC 10L

    In Stock  Express Post: 1-3 Days | Standard Post: 2-5 Days

    Endeavour QuickDeck is a premium water-based decking oil from Prep Productions, built for people who want a protected deck without the long dry times and strong odour of traditional solvent oils. Its oil-modified acrylic resin defends exterior timber on three fronts: it blocks moisture penetration, resists fungal growth and shields the boards from UV damage. Because it is water based, it dries fast, has low odour and low VOC content, and tools wash out in water. The 10 litre pail is the bulk pack, suited to large decks and full exterior timber projects, and covers up to roughly 140 square metres per coat at the maximum spread rate.Formula overviewAn oil-modified acrylic formula in a water base: a blend of water-soluble polymer resins refined to combine the penetrating character of an oil with the quick, low-odour convenience of an acrylic. The liquid is lightly coloured and dries to a transparent matt finish that lets the timber grain show through.Where to use itOutdoor: decks, garden furniture, pergolas, fences, gates and other exterior timbers.Indoor: not intended for interior floors or furniture. This is an exterior decking finish.How to use Stir well before use, as the product may settle on standing. Prepare the surface first: new or weathered boards should be cleaned with Endeavour Timber Deck Cleaner and allowed to dry. Apply with a brush or lambswool applicator. Apply 2 coats, allowing 24 hours before recoating. Coverage is up to 14 square metres per litre depending on timber porosity. Wash tools in water immediately after use. Important notes The finish is transparent matt: it enhances the timber tone but will not give an opaque colour. Apply in dry weather and avoid application if rain is expected before the coating has dried. Check the label for temperature and weather guidance. Results depend on preparation: grey, weathered timber should be cleaned back to sound wood first. Specifications Size 10 litres Base Water-based oil-modified acrylic, low VOC Coats 2 Recoat time 24 hours Coverage Up to 14 m² per litre Finish Transparent matt Application Brush or lambswool applicator Clean up Water Made in Australia SafetyNot classified as hazardous and not flammable. At most it may cause mild, short-lived skin or eye irritation, so gloves and eye protection are still sensible for prolonged use. Use in a well-ventilated area. If swallowed, do not induce vomiting, rinse the mouth, drink water and contact the Poisons Information Centre on 13 11 26 if symptoms develop. May settle or separate on standing, so stir before use, and prevent large spills entering drains or waterways. Keep out of reach of children. Refer to the manufacturer's Safety Data Sheet before use.

    In Stock  Express Post: 1-3 Days | Standard Post: 2-5 Days

    $229.50

  • Last stock! Plastermate Stud Adhesive pail, front view

    Prep Productions Prep Plastermate Stud Adhesive For Plasterboard To Timber And Steel Studs 5.2kg (Acrylic)

    In Stock  Express Post: 1-3 Days | Standard Post: 2-5 Days

    Plastermate Stud Adhesive is a pre-mixed, trade-quality wallboard adhesive for fixing plasterboard sheets to wall and ceiling framing. Part of the Plastermate plastering range that Prep Productions has manufactured in Sydney for over 25 years, it is used by professional plasterers and DIY renovators alike. The smooth, non-slump paste holds its dab shape, which matters most when you are working overhead on ceilings, and it grabs strongly to both timber and steel studs. It complies with Australian Standard AS 2753, the standard for wallboard adhesives. The 5.2kg pail is the trade size for lining whole rooms.Formula overviewA thick, water-based acrylic paste: an acrylic copolymer binder loaded with fine mineral filler gives it very high viscosity, so dabs stay exactly where you put them without slumping or stringing. It is light blue in colour, ready to use straight from the pail, and non-flammable.Where to use itIndoor: bonding plasterboard to timber studs and metal or steel studs for wall and ceiling linings.Outdoor: not intended for exterior use or wet areas unless the board manufacturer's system specifies otherwise. Check the pail label before using on substrates other than timber or steel framing.How to use Make sure framing is clean, dry and free of dust or oil. Apply walnut-sized dabs of adhesive to the stud face, spaced per the plasterboard manufacturer's specification for the sheet and frame type. Press the sheet into position and fix with screws or nails as the lining system requires. Refer to the pail label for open time and cure guidance. Wash tools and hands in warm soapy water before the adhesive dries. Important notes Dab size and spacing should follow the plasterboard system you are installing; the adhesive complements, not replaces, mechanical fixings. Store in a cool place out of direct sunlight with the lid sealed. Dried residue is combustible even though the wet paste is not; let spills harden and dispose of them per local regulations. Specifications Size 5.2kg pail Type Water-based acrylic stud adhesive Colour Light blue Consistency Thick non-slump paste Substrates Plasterboard to timber and steel studs Standard AS 2753 Clean up Warm soapy water Made in Australia SafetyNot classified as hazardous and not a scheduled poison. The paste is non-flammable. It may mildly irritate eyes, and repeated or prolonged skin contact can cause irritation, so wear safety glasses (especially when fixing ceilings) and rubber gloves, and work with adequate ventilation. If it gets in the eyes, irrigate with water for 15 minutes and seek medical attention; skin washes clean with warm soapy water. If swallowed, rinse the mouth, drink water, do not induce vomiting and seek medical advice. Keep out of reach of children. Refer to the manufacturer's Safety Data Sheet before use.

    In Stock  Express Post: 1-3 Days | Standard Post: 2-5 Days

    $33.20

  • Last stock! Plastermate Stud Adhesive 1kg tub, front view

    Prep Productions Prep Plastermate Stud Adhesive For Plasterboard To Timber And Steel Studs 1kg (Acrylic)

    In Stock  Express Post: 1-3 Days | Standard Post: 2-5 Days

    Plastermate Stud Adhesive is a pre-mixed, trade-quality wallboard adhesive for fixing plasterboard sheets to wall and ceiling framing. Part of the Plastermate plastering range that Prep Productions has manufactured in Sydney for over 25 years, it is used by professional plasterers and DIY renovators alike. The smooth, non-slump paste holds its dab shape, which matters most when you are working overhead on ceilings, and it grabs strongly to both timber and steel studs. It complies with Australian Standard AS 2753, the standard for wallboard adhesives. The 1kg tub suits patch jobs and small lining work.Formula overviewA thick, water-based acrylic paste: an acrylic copolymer binder loaded with fine mineral filler gives it very high viscosity, so dabs stay exactly where you put them without slumping or stringing. It is light blue in colour, ready to use straight from the tub, and non-flammable.Where to use itIndoor: bonding plasterboard to timber studs and metal or steel studs for wall and ceiling linings.Outdoor: not intended for exterior use or wet areas unless the board manufacturer's system specifies otherwise. Check the tub label before using on substrates other than timber or steel framing.How to use Make sure framing is clean, dry and free of dust or oil. Apply walnut-sized dabs of adhesive to the stud face, spaced per the plasterboard manufacturer's specification for the sheet and frame type. Press the sheet into position and fix with screws or nails as the lining system requires. Refer to the tub label for open time and cure guidance. Wash tools and hands in warm soapy water before the adhesive dries. Important notes Dab size and spacing should follow the plasterboard system you are installing; the adhesive complements, not replaces, mechanical fixings. Store in a cool place out of direct sunlight with the lid sealed. Dried residue is combustible even though the wet paste is not; let spills harden and dispose of them per local regulations. Specifications Size 1kg tub Type Water-based acrylic stud adhesive Colour Light blue Consistency Thick non-slump paste Substrates Plasterboard to timber and steel studs Standard AS 2753 Clean up Warm soapy water Made in Australia SafetyNot classified as hazardous and not a scheduled poison. The paste is non-flammable. It may mildly irritate eyes, and repeated or prolonged skin contact can cause irritation, so wear safety glasses (especially when fixing ceilings) and rubber gloves, and work with adequate ventilation. If it gets in the eyes, irrigate with water for 15 minutes and seek medical attention; skin washes clean with warm soapy water. If swallowed, rinse the mouth, drink water, do not induce vomiting and seek medical advice. Keep out of reach of children. Refer to the manufacturer's Safety Data Sheet before use.

    In Stock  Express Post: 1-3 Days | Standard Post: 2-5 Days

    $17.90

  • Last stock! Endeavour QuickDeck Water Based Decking Oil, front view

    Prep Productions Prep Endeavour QuickDeck Water Based Decking Oil Fast Drying Low VOC 4L

    In Stock  Express Post: 1-3 Days | Standard Post: 2-5 Days

    Endeavour QuickDeck is a premium water-based decking oil from Prep Productions, built for people who want a protected deck without the long dry times and strong odour of traditional solvent oils. Its oil-modified acrylic resin defends exterior timber on three fronts: it blocks moisture penetration, resists fungal growth and shields the boards from UV damage. Because it is water based, it dries fast, has low odour and low VOC content, and tools wash out in water. The 4 litre pack covers a typical family-sized deck with two coats.Formula overviewAn oil-modified acrylic formula in a water base: a blend of water-soluble polymer resins refined to combine the penetrating character of an oil with the quick, low-odour convenience of an acrylic. The liquid is lightly coloured and dries to a transparent matt finish that lets the timber grain show through.Where to use itOutdoor: decks, garden furniture, pergolas, fences, gates and other exterior timbers.Indoor: not intended for interior floors or furniture. This is an exterior decking finish.How to use Stir well before use, as the product may settle on standing. Prepare the surface first: new or weathered boards should be cleaned with Endeavour Timber Deck Cleaner and allowed to dry. Apply with a brush or lambswool applicator. Apply 2 coats, allowing 24 hours before recoating. Coverage is up to 14 square metres per litre depending on timber porosity. Wash tools in water immediately after use. Important notes The finish is transparent matt: it enhances the timber tone but will not give an opaque colour. Apply in dry weather and avoid application if rain is expected before the coating has dried. Check the label for temperature and weather guidance. Results depend on preparation: grey, weathered timber should be cleaned back to sound wood first. Specifications Size 4 litres Base Water-based oil-modified acrylic, low VOC Coats 2 Recoat time 24 hours Coverage Up to 14 m² per litre Finish Transparent matt Application Brush or lambswool applicator Clean up Water Made in Australia SafetyNot classified as hazardous and not flammable. At most it may cause mild, short-lived skin or eye irritation, so gloves and eye protection are still sensible for prolonged use. Use in a well-ventilated area. If swallowed, do not induce vomiting, rinse the mouth, drink water and contact the Poisons Information Centre on 13 11 26 if symptoms develop. May settle or separate on standing, so stir before use, and prevent large spills entering drains or waterways. Keep out of reach of children. Refer to the manufacturer's Safety Data Sheet before use.

    In Stock  Express Post: 1-3 Days | Standard Post: 2-5 Days

    $89.95

  • Last stock! Endeavour Timber Deck Cleaner, front view

    Prep Productions Prep Endeavour Timber Deck Cleaner Cleans Restores Rejuvenates Weathered Decks 4L

    In Stock  Express Post: 1-3 Days | Standard Post: 2-5 Days

    Endeavour Timber Deck Cleaner is the preparation step before oiling any deck, new or old. It is a triple-action, water-based cleaner from Prep Productions' Endeavour range that cleans away grime, grease, mould, algae and mildew, restores stained and dirty boards to sound timber, and rejuvenates grey, weathered decks so they brighten back towards their natural colour. On new boards it strips out natural tannins, helping your decking oil penetrate evenly and last longer. The 4 litre pack is sized for full decks and repeat seasonal cleans.Formula overviewA water-based solution whose two key actives work together: oxalic acid brightens the timber and lifts tannin staining, while benzalkonium chloride, a biocide, deals with mould, algae and mildew. The concentrate is a pale, clear liquid that dilutes in water for application.Where to use itOutdoor: all new and weathered exterior timber, with decks the headline use. Also suited to preparing other exterior timber surfaces before finishing.Indoor: not intended for interior surfaces. This is an exterior timber preparation product.How to use Dilute with water as directed on the pack label. Apply the diluted solution with a deck scrub, working it into the boards. Rinse thoroughly and allow the timber to dry before oiling. Follow the label for contact time and drying guidance. Coverage is 5 to 10 square metres per litre when diluted, depending on timber porosity and texture. Important notes This is a Schedule 6 poison. Store it tightly closed, away from children and pets. Wear gloves and protective clothing: the concentrate is harmful in contact with skin and if swallowed. Prevent runoff entering drains, garden beds or waterways, and rinse surrounding plants with water if splashed. May settle on standing; stir before use. Specifications Size 4 litres Base Water-based, oxalic acid and benzalkonium chloride actives Coverage 5 to 10 m² per litre diluted Application Deck scrub Clean up Water Made in Australia SafetySchedule 6 poison. Harmful if swallowed and harmful in contact with skin. Wear rubber or nitrile gloves and eye protection, avoid contact with skin, eyes and clothing, and do not eat, drink or smoke while using. If swallowed, do not induce vomiting, rinse the mouth and call the Poisons Information Centre on 13 11 26 or a doctor. For skin contact, wash with warm soapy water for 10 to 20 minutes and remove contaminated clothing; for eyes, flush with lukewarm water and seek advice if irritation persists. Not flammable. Keep out of reach of children. Refer to the manufacturer's Safety Data Sheet before use.

    In Stock  Express Post: 1-3 Days | Standard Post: 2-5 Days

    $39.95

  • Last stock! Endeavour Timber Deck Cleaner 1 litre bottle, front view

    Prep Productions Prep Endeavour Timber Deck Cleaner Cleans Restores Rejuvenates Weathered Decks 1L

    In Stock  Express Post: 1-3 Days | Standard Post: 2-5 Days

    Endeavour Timber Deck Cleaner is the preparation step before oiling any deck, new or old. It is a triple-action, water-based cleaner from Prep Productions' Endeavour range that cleans away grime, grease, mould, algae and mildew, restores stained and dirty boards to sound timber, and rejuvenates grey, weathered decks so they brighten back towards their natural colour. On new boards it strips out natural tannins, helping your decking oil penetrate evenly and last longer.Formula overviewA water-based solution whose two key actives work together: oxalic acid brightens the timber and lifts tannin staining, while benzalkonium chloride, a biocide, deals with mould, algae and mildew. The concentrate is a pale, clear liquid that dilutes in water for application.Where to use itOutdoor: all new and weathered exterior timber, with decks the headline use. Also suited to preparing other exterior timber surfaces before finishing.Indoor: not intended for interior surfaces. This is an exterior timber preparation product.How to use Dilute with water as directed on the pack label. Apply the diluted solution with a deck scrub, working it into the boards. Rinse thoroughly and allow the timber to dry before oiling. Follow the label for contact time and drying guidance. Coverage is 5 to 10 square metres per litre when diluted, depending on timber porosity and texture. Important notes This is a Schedule 6 poison. Store it tightly closed, away from children and pets. Wear gloves and protective clothing: the concentrate is harmful in contact with skin and if swallowed. Prevent runoff entering drains, garden beds or waterways, and rinse surrounding plants with water if splashed. May settle on standing; stir before use. Specifications Size 1 litre Base Water-based, oxalic acid and benzalkonium chloride actives Coverage 5 to 10 m² per litre diluted Application Deck scrub Clean up Water Made in Australia SafetySchedule 6 poison. Harmful if swallowed and harmful in contact with skin. Wear rubber or nitrile gloves and eye protection, avoid contact with skin, eyes and clothing, and do not eat, drink or smoke while using. If swallowed, do not induce vomiting, rinse the mouth and call the Poisons Information Centre on 13 11 26 or a doctor. For skin contact, wash with warm soapy water for 10 to 20 minutes and remove contaminated clothing; for eyes, flush with lukewarm water and seek advice if irritation persists. Not flammable. Keep out of reach of children. Refer to the manufacturer's Safety Data Sheet before use.

    In Stock  Express Post: 1-3 Days | Standard Post: 2-5 Days

    $13.95

  • Last stock! Oz-Oil Decking Oil 4 litre can, front view Oz-Oil Decking Oil 4 litre can

    Prep Productions Prep Oz-Oil Decking Oil Natural Plant Based For Decks Fences Outdoor Furniture 4L

    In Stock  Express Post: 1-3 Days | Standard Post: 2-5 Days

    Oz-Oil Decking Oil is a multipurpose exterior timber oil from Prep Productions, pitched as a five-in-one product: one can covers your deck, outdoor furniture, pergola, fences and gates. Blended from natural plant oils, it soaks into the timber to preserve and seal it from within, leaving a natural, semi-transparent appearance rather than a glossy film. A practical bonus for occasional users: the manufacturer states it is non-evaporative and will not gel in the can, so leftover oil keeps for the next job rather than going to waste.Formula overviewA blend of natural seed oils and waxes carried in dipentene, a citrus-derived solvent. The oil is lightly pigmented and semi-clear with a citrus odour, and works by penetrating the boards rather than coating them.Where to use itOutdoor: external timber including decking, cladding, railings, joists, bearers, rafters, pergolas, garden furniture, fences and gates.Indoor: not intended for interior use. This is an exterior timber oil.How to use Stir well before use, as the oils may settle in the can. Make sure the timber is clean, dry and free of old coatings. Follow the can label for preparation guidance. Apply with a brush or lambswool applicator. Apply 2 coats, allowing 24 hours before recoating. Coverage is up to 12 square metres per litre depending on timber porosity. Important notes The finish is semi-transparent. It enriches the timber tone but will not deliver an opaque or solid colour. Like all penetrating oils, results depend on surface preparation. Weathered grey timber should be cleaned back to sound wood first. Check the can label for clean-up directions and detailed preparation steps. Specifications Size 4 litres Base Natural seed oils and waxes in citrus-derived dipentene Coats 2 Recoat time 24 hours Coverage Up to 12 m² per litre Finish Transparent matt, natural semi-transparent tone Application Brush or lambswool applicator Shelf life Non-evaporative, does not gel in the can Made in Australia SafetyCombustible liquid (flash point around 68°C). Keep away from heat, sparks and open flames, and store below 30°C, tightly closed, in a well-ventilated area away from strong oxidisers. Rags soaked in decking oil can self-heat and spontaneously combust: lay used rags flat to dry outdoors or soak them in water before disposal. May irritate skin and can cause an allergic skin reaction in people sensitised to citrus solvents, so wear gloves when applying. If swallowed, do not induce vomiting, rinse the mouth and call the Poisons Information Centre on 13 11 26. Toxic to aquatic life: prevent washings and spills entering drains or waterways. Keep out of reach of children. Refer to the manufacturer's Safety Data Sheet before use.

    In Stock  Express Post: 1-3 Days | Standard Post: 2-5 Days

    $64.68

  • Last stock! Organoil Woodguard 4 litre can, front view Timber stairs treated with Organoil Woodguard

    Prep Productions Prep Organoil Woodguard Penetrating New Timber Seasoner And Sealer 4L

    In Stock  Express Post: 1-3 Days | Standard Post: 2-5 Days

    Organoil Woodguard is a deeply penetrating oil treatment made to look after brand-new exterior timber in the period between installation and final finishing. Fresh hardwood often carries high moisture and, left bare, can cup, split, crack or bleed tannins as it dries out. Woodguard soaks into the boards and stabilises them while they acclimatise, so the timber arrives at oiling day in sound, even condition. It is made in Australia by Prep Productions and formulated for harsh Australian and New Zealand exposure.Formula overviewA natural-oil blend built around tung oil and beeswax, carried by dipentene, a citrus-derived solvent. Rather than forming a film on top of the wood, the blend penetrates the timber surface, which is why it is applied as a single coat and later over-coated with a finishing oil.Where to use itOutdoor: new, raw timber decking, joists, bearers, cladding, posts, rails and exterior joinery. Particularly recommended for dense or high-moisture hardwoods such as spotted gum and plantation species before they are oiled.Indoor: not intended for interior finishing. Woodguard is an exterior pre-treatment, not a furniture or floor finish.How to use Stir well before use, as natural oils can settle. New raw timber can be treated directly. Timber that has already weathered in the elements should first be cleaned with a timber wash such as Organoil Wash-A-Way. Apply one coat only, using a brush or lambswool applicator. Coverage is up to 12 square metres per coat depending on timber density and porosity. Allow the treatment to dry fully before applying your finishing oil. Follow the can label for drying guidance. Important notes Woodguard is an interim protectant, not a final finish. Plan to apply a decking or exterior timber oil afterwards. Designed as a one-coat application. Do not over-apply. For new or raw untreated timber only. Previously coated timber should be stripped and washed first. Specifications Size 4 litres Base Solvent-borne natural oils (tung oil, beeswax, citrus-derived dipentene) Coats 1 Coverage Up to 12 m² per coat Finish Matt, natural Application Brush or lambswool applicator Made in Australia SafetyCombustible liquid (flash point around 61°C). Keep away from heat, sparks and open flames, and store below 30°C in a tightly closed container in a well-ventilated area. Rags and applicators soaked in this product can self-heat and spontaneously combust: lay used rags flat to dry outdoors or soak them in water before disposal. May be fatal if swallowed and enters airways; do not induce vomiting, rinse the mouth and call the Poisons Information Centre on 13 11 26. May irritate skin and eyes and can cause an allergic skin reaction in sensitised people, so wear gloves and eye protection. Keep out of reach of children. Refer to the manufacturer's Safety Data Sheet before use.

    In Stock  Express Post: 1-3 Days | Standard Post: 2-5 Days

    $84.56

  • Prep Traditional Putty Premium Linseed Oil Formula For Glazing Woodfilling Plumbing 400g

    Prep Productions Prep Traditional Putty Premium Linseed Oil Formula For Glazing Woodfilling Plumbing 400g

    In Stock  Express Post: 1-3 Days | Standard Post: 2-5 Days

    In keeping with the traditional formula, PREP Linseed Oil Putty is manufactured to the highest standards for almost all situations where a reliable linseed oil-based putty is required. Applications include; window glazing, filling nail holes in furniture, flooring, and general building applications. Environmentally friendly Non-toxic Tough & flexible Easy to use Weather-resistant

    In Stock  Express Post: 1-3 Days | Standard Post: 2-5 Days

    $7.50

  • Prep Plaster Of Paris For Sculpting Casting Easy to Shape Dries White 3Kg

    Prep Productions Prep Plaster Of Paris For Sculpting Casting Easy to Shape Dries White 3Kg

    In Stock  Express Post: 1-3 Days | Standard Post: 2-5 Days

    Ideal for craft, PREP Plaster of Paris can be used for sculpting, casting, and many other applications. Once set, it can be sanded, drilled, and chiseled to the required shape and size, then painted and kiln-dried. Environmentally friendly Dries white Dries fast Very high weather resistance Unique properties make this product easy to shape and sand Ideal for schools and craft classes or just having fun!

    In Stock  Express Post: 1-3 Days | Standard Post: 2-5 Days

    $16.50

  • Prep Plaster Filler Interior Exterior White Finish Non-Shrink 1Kg

    Prep Productions Prep Plaster Filler Interior Exterior White Finish Non-Shrink 1Kg

    In Stock  Express Post: 1-3 Days | Standard Post: 2-5 Days

    Prep Interior & Exterior is a dry, plaster based, cement reinforced filler for the repair of common non-flexible wall linings such as plaster, concrete, timber, and wallboard. This product is highly water-resistant and therefore suitable for interior or exterior use. Can be used to fill deep or shallow crevices in one application. Easy to mix and use White finish Non-shrinking Easily sanded Can be nailed or screwed when dry Water-resistant

    In Stock  Express Post: 1-3 Days | Standard Post: 2-5 Days

    $13.50

  • Prep Organoil Natural Wax & Polish 500ml

    Prep Productions Prep Organoil Natural Wax & Polish 500ml

    In Stock  Express Post: 1-3 Days | Standard Post: 2-5 Days

    Polishes internal furniture & joinery that has been previously waxed or oiled. Rejuvenates french polished/lacquered items and leather items. Also suitable for sealing and polishing slate, terracotta and stucco Coverage: Up to 40 m2 Apply with: Lint free cloth Coats: 2 Recoat: 24 Hours Sheel Level: Pale Satin

    In Stock  Express Post: 1-3 Days | Standard Post: 2-5 Days

    $30.95

  • Last stock! Prep Multi-Purpose Interior & Exterior Filler 4Kg

    Prep Productions Prep Multi-Purpose Interior & Exterior Filler 4Kg

    In Stock  Express Post: 1-3 Days | Standard Post: 2-5 Days

    A ready-mixed heavy duty bonded filler for filling holes internally and externally. PREP Multi-Purpose Filler can be used to fill holes in concrete, cement, brickwork, timber and plasterboard, as well as many other porous substrates. Easy to use Can be tinted Ready-mixed Interior & exterior Environmentally friendly Heavy-duty bonded filler Ideal for floors, walls, ceilings, roofs

    In Stock  Express Post: 1-3 Days | Standard Post: 2-5 Days

    $71.95

  • Last stock! Prep Multi-Purpose Interior & Exterior Filler 200g

    Prep Productions Prep Multi-Purpose Interior & Exterior Filler 200g

    In Stock  Express Post: 1-3 Days | Standard Post: 2-5 Days

    A ready-mixed heavy duty bonded filler for filling holes internally and externally. PREP Multi-Purpose Filler can be used to fill holes in concrete, cement, brickwork, timber and plasterboard, as well as many other porous substrates. Easy to use Can be tinted Ready-mixed Interior & exterior Environmentally friendly Heavy-duty bonded filler Ideal for floors, walls, ceilings, roofs

    In Stock  Express Post: 1-3 Days | Standard Post: 2-5 Days

    $6.07

  • Last stock! Prep Multi-Purpose Interior & Exterior Filler 10Kg

    Prep Productions Prep Multi-Purpose Interior & Exterior Filler 10Kg

    In Stock  Express Post: 1-3 Days | Standard Post: 2-5 Days

    A ready-mixed heavy duty bonded filler for filling holes internally and externally. PREP Multi-Purpose Filler can be used to fill holes in concrete, cement, brickwork, timber and plasterboard, as well as many other porous substrates. Easy to use Can be tinted Ready-mixed Interior & exterior Environmentally friendly Heavy-duty bonded filler Ideal for floors, walls, ceilings, roofs

    In Stock  Express Post: 1-3 Days | Standard Post: 2-5 Days

    $135.00

  • Last stock! Prep Multi-Purpose Filler Interior & Exterior 1Kg

    Prep Productions Prep Multi-Purpose Filler Interior & Exterior 1Kg

    In Stock  Express Post: 1-3 Days | Standard Post: 2-5 Days

    A ready-mixed heavy duty bonded filler for filling holes internally and externally. PREP Multi-Purpose Filler can be used to fill holes in concrete, cement, brickwork, timber and plasterboard, as well as many other porous substrates. Easy to use Can be tinted Ready-mixed Interior & exterior Environmentally friendly Heavy-duty bonded filler Ideal for floors, walls, ceilings, roofs

    In Stock  Express Post: 1-3 Days | Standard Post: 2-5 Days

    $17.04

  • Prep Mould Defence Addittive 75ml

    Prep Productions Prep Mould Defence Addittive 75ml -Add 5mL per L of Paint/Stain/Oil

    In Stock  Express Post: 1-3 Days | Standard Post: 2-5 Days

    A powerful long-lasting mould inhibitor (when added to an existing product e.g. paint) which inhibits the unsightly growth of mould on to the surface it is applied to. Mould Defence forms an enduring film that will not change the look or feel of the substrate to which it is applied.   Mould Defence is recommended to be used in areas where high moisture is present e.g. bathroom, laundries and kitchens, however, for peace of mind, can be used throughout the whole house.   Mould Defence can be added to a wide range of products including paint (water based and solvent), timber oils/stains, textured coatings, grout, mortar and adhesive.   Add 5mL per L of paint/stain/oil or 5mL per Kg of RTU product.

    In Stock  Express Post: 1-3 Days | Standard Post: 2-5 Days

    $15.16

  • Prep Mould Defence Addittive 50ml

    Prep Productions Prep Mould Defence Addittive 50ml -Add 5mL per L of Paint/Stain/Oil

    In Stock  Express Post: 1-3 Days | Standard Post: 2-5 Days

    A powerful long-lasting mould inhibitor (when added to an existing product e.g. paint) which inhibits the unsightly growth of mould on to the surface it is applied to. Mould Defence forms an enduring film that will not change the look or feel of the substrate to which it is applied.   Mould Defence is recommended to be used in areas where high moisture is present e.g. bathroom, laundries and kitchens, however, for peace of mind, can be used throughout the whole house.   Mould Defence can be added to a wide range of products including paint (water based and solvent), timber oils/stains, textured coatings, grout, mortar and adhesive.   Add 5mL per L of paint/stain/oil or 5mL per Kg of RTU product.

    In Stock  Express Post: 1-3 Days | Standard Post: 2-5 Days

    $13.35

  • Last stock! Prep Fx Exterior Super Base Coat X 12Kg

    Prep Productions Prep Fx Exterior Super Base Coat X 12Kg

    In Stock  Express Post: 1-3 Days | Standard Post: 2-5 Days

    FX Super Base Coat X is a revolutionary joint compound. It has remarkable flexibility, minimal shrinkage and extraordinary strength, outperforming current industry leaders’ compounds, both pre-mixed and dry products. * Its flexibility helps with remediation of hairline cracks due to minor structural movement. It is suitable for substrates such as fibre cement sheeting and Magnum Boards. FX Super Base Coat X is part 1 of a high-performance, integrated compound system. Developed by FX Australia and manufactured locally, the use of all products in the Compound System guarantees a time-saving, superior finish and greater strength for substrates. Features Benefits Water-based Ease of application Strong Easy spreading Flexible Time-saving Water-resistant Easy clean-up Pre-mixed Uses FX Super Base Coat X is used for fixing fibre cement sheets and Magnum Board joints. Surface Preparation All surfaces must be thoroughly cleaned and free of dirt, dust and grease. Substrates need to be constructed or installed to industry/Australian Standards. Application: Load FX Super Base Coat X onto hawke using a 150 mm – 200 mm broad knife/trowel and place in to the joint recess, working steadily from one end to the other of the joint recess, ensuring the Compound fills the joint recess and is evenly and smoothly applied. Next embed fibre-fuse tape into the Compound. Scrape off any excess Compound. Note, for added strength and confidence load FX Super Base Coat X in to the joint recess over the fibrefuse tape, working steadily from one end to the other of the joint recess, ensuring the Compound fills the joint recess and is evenly and smoothly applied. Ensure force is applied to properly embed Compound and fibre-fuse tape into the recess. Allow first coat of FX  uper Base Coat X to dry for a minimum of 3–4 hours at 25 °C and 50% humidity. Apply a second coat of FX Super Base Coat X using the same method as the first coat. Ensure the  compound is flush with the sheets. Scrape off any excess Compound. Allow to dry for 3–4 hours at 25 °C and 50% humidity before proceeding to product 2, FX Topping Compound X, or proceed straight to water-proofing system or texture-coating system. Important Note: Clean tools frequently with water and a sponge to stop Compound drying on tools. Approximate Spreading Rate: N/A. Approximate Film Thickness per coat: Wet: 2000 Microns; Dry: 1500 Microns. Requires: 2 coats. Method: Trowel or broad knife. Drying Times (at 25 °C and 50% humidity): Touch: 1Hour; Recoat: 3–4 Hours. Note: Do not apply product if the air temperature or substrate temperature is below 12.5 °C or above 35 °C. The temperature should not fall below 10 °C during the drying process. Clean-up: Water. Safety: Dust Mask

    In Stock  Express Post: 1-3 Days | Standard Post: 2-5 Days

    $175.00

  • Last stock! Prep Bicarb Cleaner 1Kg

    Prep Productions Prep Bicarb Cleaner 1Kg

    In Stock  Express Post: 1-3 Days | Standard Post: 2-5 Days

    Prep Bi-Carb Cleaner makes stainless sinks shine, tiles sparkle and removes soap scum in showers. Use in the kitchen on benches, cook tops, laminate cupboard doors Deodorise upholstery and carpet by sprinkling with Bi-Carb, letting it sit for 15 minutes, then vacuum it up 

    In Stock  Express Post: 1-3 Days | Standard Post: 2-5 Days

    $8.95

  • FlexiBond Paper Tape for Plasterboard: Ultimate Strength & Smooth Finishing for Wall Joints 75m

    Prep Productions FlexiBond Paper Tape for Plasterboard: Ultimate Strength & Smooth Finishing for Wall Joints 75m

    In Stock  Express Post: 1-3 Days | Standard Post: 2-5 Days

    Discover the strength and versatility of FlexiBond Plasterboard Paper Tape, the premier choice for achieving professional-grade, seamless finishes on all your plasterboard projects. Specifically crafted for both the DIY enthusiast and the professional builder, our paper tape is designed to provide unparalleled support and durability to your wall joints and repairs. FlexiBond Paper Tape stands out with its unique features: Superior Joint Support: Engineered to reinforce plasterboard joints, preventing cracks and ensuring a durable bond. Smooth Application: Its fine texture allows for a seamless blend with plaster, resulting in a smooth, invisible finish upon painting or wallpaper application. Versatile Compatibility: Ideal for use with a wide range of jointing compounds and plaster fillers, FlexiBond adapts to your specific project needs. Ease of Use: With a design focused on user convenience, our paper tape is easy to cut, apply, and embed into jointing compound, making it suitable for all skill levels. Whether you’re tackling a minor repair or embarking on a large-scale construction project, FlexiBond Plasterboard Paper Tape is your go-to for achieving flawless walls with lasting integrity.

    In Stock  Express Post: 1-3 Days | Standard Post: 2-5 Days

    $4.00

  • Last stock! FlexiBond Paper Tape for Plasterboard: Ultimate Strength & Smooth Finishing for Wall Joints 25m

    Prep Productions FlexiBond Paper Tape for Plasterboard: Ultimate Strength & Smooth Finishing for Wall Joints 25m

    In Stock  Express Post: 1-3 Days | Standard Post: 2-5 Days

    Discover the strength and versatility of FlexiBond Plasterboard Paper Tape, the premier choice for achieving professional-grade, seamless finishes on all your plasterboard projects. Specifically crafted for both the DIY enthusiast and the professional builder, our paper tape is designed to provide unparalleled support and durability to your wall joints and repairs. FlexiBond Paper Tape stands out with its unique features: Superior Joint Support: Engineered to reinforce plasterboard joints, preventing cracks and ensuring a durable bond. Smooth Application: Its fine texture allows for a seamless blend with plaster, resulting in a smooth, invisible finish upon painting or wallpaper application. Versatile Compatibility: Ideal for use with a wide range of jointing compounds and plaster fillers, FlexiBond adapts to your specific project needs. Ease of Use: With a design focused on user convenience, our paper tape is easy to cut, apply, and embed into jointing compound, making it suitable for all skill levels. Whether you’re tackling a minor repair or embarking on a large-scale construction project, FlexiBond Plasterboard Paper Tape is your go-to for achieving flawless walls with lasting integrity.

    In Stock  Express Post: 1-3 Days | Standard Post: 2-5 Days

    $2.00

  • Eazy Tape Plasterboard Joint Tape: Fibreglass Reinforcement for Flawless Walls & Repairs 20m

    Prep Productions Plasterboard Joint Tape: Fibreglass Reinforcement for Walls & Repairs 20m

    In Stock  Express Post: 1-3 Days | Standard Post: 2-5 Days

    Introducing Eazy Tape Plasterboard Joint Tape, your ultimate solution for achieving flawless walls and durable repairs. Designed for both the DIY enthusiast and the professional, this self-adhesive fibreglass mesh tape is engineered to simplify your plasterboard wall panel joining or patching tasks. Crafted from high-strength fibreglass mesh, it ensures a robust bond that complements both plaster filler and jointing compounds seamlessly. Why choose Eazy Tape? Here are the benefits: Easy to Use: With its self-adhesive backing, the application is straightforward and mess-free, adhering securely to surfaces without the need for additional glues. DIY-Friendly, Professional Results: Whether you're tackling a home project or a professional job, Eazy Tape guarantees a smooth, professional finish. Strong Bonding & Holding Power: The superior fibreglass mesh material provides exceptional strength, reducing the risk of cracks and ensuring longevity. Quick Results: Speed up your repair or construction projects with a tape that sets quickly, allowing you to move on to the next step without delay. Perfect for a wide range of applications, from repairing cracks to joining new wall panels, Eazy Tape Plasterboard Joint Tape is the dependable choice for achieving seamless results with ease.

    In Stock  Express Post: 1-3 Days | Standard Post: 2-5 Days

    $9.50

  • Last stock! Eazy Tape Plasterboard Joint Tape: Fibreglass 90m

    Prep Productions Eazy Tape Plasterboard Joint Tape: Fibreglass 90m

    In Stock  Express Post: 1-3 Days | Standard Post: 2-5 Days

    Introducing Eazy Tape Plasterboard Joint Tape, your ultimate solution for achieving flawless walls and durable repairs. Designed for both the DIY enthusiast and the professional, this self-adhesive fibreglass mesh tape is engineered to simplify your plasterboard wall panel joining or patching tasks. Crafted from high-strength fibreglass mesh, it ensures a robust bond that complements both plaster filler and jointing compounds seamlessly. Why choose Eazy Tape? Here are the benefits: Easy to Use: With its self-adhesive backing, the application is straightforward and mess-free, adhering securely to surfaces without the need for additional glues. DIY-Friendly, Professional Results: Whether you're tackling a home project or a professional job, Eazy Tape guarantees a smooth, professional finish. Strong Bonding & Holding Power: The superior fibreglass mesh material provides exceptional strength, reducing the risk of cracks and ensuring longevity. Quick Results: Speed up your repair or construction projects with a tape that sets quickly, allowing you to move on to the next step without delay. Perfect for a wide range of applications, from repairing cracks to joining new wall panels, Eazy Tape Plasterboard Joint Tape is the dependable choice for achieving seamless results with ease.

    In Stock  Express Post: 1-3 Days | Standard Post: 2-5 Days

    $15.00

  • Last stock! Prep Disinfectant Concentrate Hospital Grade Sanitiser & Household Cleaner 1 Litre

    Prep Productions Prep Disinfectant Concentrate Hospital Grade Sanitiser & Household Cleaner 1 Litre

    In Stock  Express Post: 1-3 Days | Standard Post: 2-5 Days

    Keep your surfaces clean with PREP Hospital Grade Lemon Disinfectant. This concentrated, hospital grade formula destroys germs fast and is ideal for general purpose cleaning at home, in offices, and in workplaces. Hospital grade disinfectant with fresh lemon fragrance Concentrated formula for effective sanitising and everyday cleaning Suitable for kitchens, bathrooms, floors, walls, and high touch points Economical, easy to dilute, and simple to use How to Use For hospital grade disinfecting: Dilute 1 part concentrate with 3 parts water (1:3). Apply to pre-cleaned hard, non-porous surfaces. Allow adequate contact time, then rinse if required. For light cleaning: Dilute 250 mL concentrate in 2.5 L water (approximately 1:10). Mop, wipe, or spray, then allow to dry. Rinse food contact surfaces with potable water after use. Where to Use Benchtops, sinks, taps, splashbacks Floors, walls, tiles, grout Toilets, bathrooms, showers Desks, door handles, handrails, shared touch points Good to Know Concentrate makes multiple ready to use bottles from one pack Lemon scent leaves areas smelling fresh after cleaning Versatile for both sanitising and routine maintenance cleans Dilution Guide Application Ratio Example Mix Hospital grade disinfecting 1:3 (concentrate:water) 250 mL + 750 mL water Light cleaning 1:10 (approx.) 250 mL + 2.5 L water Safety Use on hard, non-porous surfaces only Wear gloves for prolonged use and ensure good ventilation Avoid contact with eyes and skin. Do not ingest Keep out of reach of children and pets Specifications Brand Prep Productions Product Type Hospital grade disinfectant concentrate Size 1 Litre Fragrance Lemon Item Weight 1.2 kg Package Dimensions 19 cm x 13 cm x 7 cm Always follow label directions. Test on a small inconspicuous area before first use.

    In Stock  Express Post: 1-3 Days | Standard Post: 2-5 Days

    $12.50


You have seen 48 out of 58 products

Prep Productions Logo

Get the best start to every project with Prep Productions, Australia’s trusted brand for surface preparation and finishing solutions. Known for reliable performance and professional quality, Prep Productions products are designed to make painting, decorating, and repair work easier, cleaner, and longer-lasting.

At Glues Australia, we stock a wide range of Prep Productions essentials, including:

  • Fillers & Patching Compounds – for repairing cracks, dents, and holes in walls and ceilings.

  • Surface Preparation Products – cleaners, primers, and sanding solutions for a flawless finish.

  • Painting Accessories – tools that help achieve professional results with ease.

  • Specialty Solutions – designed for specific preparation and finishing challenges.

Why choose Prep Productions?

  • Trusted Australian brand for surface prep and repair

  • Easy-to-use, professional-quality products

  • Suitable for both DIYers and trade professionals

  • Helps achieve smooth, durable, and long-lasting finishes

From patching and priming to painting and finishing, Prep Productions ensures your projects start strong and end beautifully.

Shop the Prep Productions range today at Glues Australia – where the best brands stick

Login

Forgot your password?

Don't have an account yet?
Create account