Dunlop Pressure Sensitive Carpet Tile Adhesive 2L
Dunlop Carpet Tile Adhesive is a high strength, water based pressure sensitive adhesive designed for carpet tiles and double bonded underlay systems. It tacks off to a clear, dry-to-touch film that grips firmly yet allows tiles to be lifted and replaced for maintenance.
Key features
- Pressure sensitive grab for secure hold and easy tile replacement
- Water based, low odour, easy to apply
- Suitable for smooth or textured tile backings and composition vinyl tiles
- Works with double bonded underlays in commercial fitouts
Suitable substrates
Concrete, plywood, fibre cement sheet, compressed fibre cement, and suitable underlay sheets. Subfloors must be dry, smooth, clean, and prepared to AS 1884 requirements including moisture testing.
Coverage
- Approx. 10 m² per 2 L using a 1.6 mm V notched trowel
- Approx. 14 m² per 2 L using a long nap roller
Drying and traffic
- Allow adhesive to become tacky and transparent before laying tiles. Typical tack off time is 2 to 4 hours depending on conditions.
- Heavy foot traffic after 24 hours
- Avoid wet cleaning or water exposure for 48 hours
Application guide
- Prepare the subfloor. Prime very porous substrates if required. Treat rising damp or green concrete with a suitable moisture barrier.
- Apply adhesive evenly:
- Textured backs, composition vinyl tiles, and double bond underlays: 1.6 mm V notched trowel held at about 60 degrees
- Smooth backed tiles: long nap roller
- Wait until the film is tacky and clear with no transfer to fingertips. Early placement into wet adhesive will create a more permanent bond.
- Lay tiles, cut and reposition as required, then roll in both directions with a suitable roller to ensure full contact.
Clean up
Clean tools immediately with warm soapy water. Remove dried residue with mineral turps.
Storage and shelf life
12 months in unopened packaging when stored in a cool, dry place at about 23°C and 50% RH.
Good to know
- Do not apply below 15°C or above 30°C surface temperature.
- Not suitable for traditional carpet-to-underlay stretch-in installations. For double bond systems, follow the flooring manufacturer’s instructions.
Safety
Wear gloves and eye protection, ensure adequate ventilation, and keep out of reach of children. If eye contact occurs, rinse with water and seek medical advice if irritation persists.
