🌍 Worldwide Shipping Available | Fast & Secure Delivery ✈️

Ryobi 18V ONE+ HP Brushless Table Saw 210mm Tool Only - for Jobsite Cutting

Description

18V ONE+ HP Series

Ryobi 18V ONE+ HP Brushless
Table Saw 210mm Tool Only

A jobsite-ready cordless table saw with the power and precision to rip sheet goods, crosscut framing timber, and make accurate bevel and mitre cuts anywhere on site. No power point, no extension cord, no compromise.

210mm Blade Size
HP Brushless Motor
45° Bevel Capacity
18V Battery Platform
Product Overview

The Ryobi 18V ONE+ HP Brushless Table Saw is a compact, portable 210mm table saw built specifically for jobsite use. Powered by a high-performance brushless motor and any Ryobi 18V ONE+ battery, it delivers the cutting performance needed for ripping sheet material, crosscutting structural timber, and making accurate angled cuts, all without a power outlet within reach.


The 210mm blade gives it genuine table saw capability in a footprint compact enough to carry to the next floor of a build or load into a ute tray. The rip fence, mitre gauge, and 45 degree bevel adjustment provide the accuracy and versatility expected from a stationary saw, packed into a cordless tool that moves with the job.

HP Brushless
High Performance Motor

Corded Power Without the Cord

The HP brushless motor is engineered to deliver sustained cutting power through hardwood framing, engineered sheet goods, and structural pine without stalling or losing speed mid-cut. Brushless technology means more energy goes into the blade and less is lost as heat, resulting in better performance per amp-hour and a motor that holds up across a full day on site. Paired with a high-capacity 18V ONE+ battery, runtime is genuinely practical for real jobsite use.

Cutting Capacities
57mm Depth at 90° Maximum straight cut depth through seasoned framing and sheet goods.
40mm Depth at 45° Full bevel cut depth for mitre work, skirting, and angle joints.
636mm Rip Capacity Rip sheets up to 636mm wide from the blade, covering full sheet ripping with a guide rail.
0–45° Bevel Range Continuous bevel adjustment from square to 45 degrees with positive stops at common angles.
Jobsite Table Saw vs Workshop Table Saw

This Jobsite Table Saw

  • Fully cordless, goes wherever the job is
  • Compact enough to carry between floors and into tight spaces
  • Loads into a ute or van without a forklift
  • No power outlet or extension lead required
  • Set up and pack down in under a minute
  • 210mm blade handles the majority of site cutting tasks

Cabinet / Workshop Saw

  • Requires 240V power, often a dedicated circuit
  • Heavy and fixed in place, not portable
  • Larger table surface for big sheet work
  • Better suited to high-volume production cutting
  • Longer setup and installation time
  • Not practical for on-site use or remote locations

210mm Blade Capacity

A full 210mm blade gives this saw genuine cutting depth, handling 90mm framing timber, plywood, MDF, laminate board, and most sheet goods encountered on a residential or commercial construction site.

Adjustable Rip Fence

The onboard rip fence locks parallel to the blade for accurate repeated rip cuts across the full width of the table. Essential for breaking down sheet goods and cutting consistent widths without a measuring tape on every pass.

Mitre Gauge

The included mitre gauge slides in the table slot and locks at any angle for accurate crosscuts and angled cuts. Positive stops at common angles including 45 and 90 degrees speed up repetitive cuts.

45° Bevel Adjustment

The blade tilts from 0 to 45 degrees with a locking mechanism that holds the angle firmly through the cut. Essential for skirting boards, architrave joins, and any application requiring angled cuts through material.

Blade Guard and Riving Knife

A full blade guard assembly with anti-kickback pawls and a riving knife keeps the cut kerf open and prevents timber from pinching the blade, the primary cause of kickback on table saws.

Dust Port

An integrated dust extraction port accepts standard vacuum hose connections. Effective dust capture at the source keeps the work area clear and improves cut line visibility during operation.

Common Jobsite Applications

Ripping plywood and MDF sheets

Crosscutting framing timber

Skirting and architrave mitre cuts

Decking and flooring board cuts

Laminate benchtop cutting

Cabinet panel and shelving cuts

Built-In Safety Features

Full blade guard assembly with anti-kickback pawls
Riving knife keeps cut kerf open and prevents blade pinch
Blade guard removal tool required, no accidental removal
Blade height and bevel locking mechanisms
On/off switch with removable safety key
Non-slip rubber feet for stable bench or floor use
18V
ONE+

Part of the Ryobi 18V ONE+ System

Compatible with all Ryobi 18V ONE+ batteries. For sustained cutting through hardwood framing and repeated sheet ripping, a high-capacity battery such as a 6Ah or 9Ah pack is strongly recommended to maximise runtime between charges on demanding jobsite cutting sessions.

Technical Specifications
Battery Voltage 18V (Ryobi ONE+)
Motor Type Brushless (HP Series)
Blade Size 210mm (8-1/4 inch)
Arbor Size 16mm
No-Load Speed 5,800 RPM
Max Cut Depth at 90° 57mm
Max Cut Depth at 45° 40mm
Bevel Range 0 to 45 degrees
Rip Capacity (right of blade) 636mm
Table Dimensions 432mm x 368mm
Blade Guard Yes, with anti-kickback pawls
Riving Knife Yes
Dust Port Yes (standard vacuum connection)
Safety Key Yes (removable)
Battery Included No (Tool Only)
Charger Included No (Tool Only)
Compatible Batteries All Ryobi 18V ONE+ batteries
Warranty 3 Year Ryobi Warranty (when registered)
What's in the Box
  • Ryobi 18V ONE+ HP Table Saw (Tool Only)
  • 210mm 24T carbide-tipped blade (fitted)
  • Rip fence
  • Mitre gauge
  • Blade guard assembly
  • Riving knife
  • Blade changing wrench
  • Push stick
  • Safety key
  • User manual
Safety Note:  Always wear eye protection, hearing protection, and appropriate PPE when operating a table saw. Never remove the blade guard or riving knife during operation. Keep hands clear of the blade path at all times and use the push stick provided when ripping narrow stock. This is a Tool Only product. Battery and charger are not included.

Ryobi 18V ONE+ HP Brushless Table Saw 210mm Tool Only - for Jobsite Cutting

Product form

18V ONE+ HP Series Ryobi 18V ONE+ HP BrushlessTable Saw 210mm Tool Only A jobsite-ready cordless table saw with the... Read more

In Stock  Express Post: 1-3 Days | Standard Post: 2-5 Days

$479.00

    • Guaranteed secure & safe checkout.

      paypal
    • Shipped today? Order within: Jun 05, 2026 10:00:00 +1000

    Description

    18V ONE+ HP Series

    Ryobi 18V ONE+ HP Brushless
    Table Saw 210mm Tool Only

    A jobsite-ready cordless table saw with the power and precision to rip sheet goods, crosscut framing timber, and make accurate bevel and mitre cuts anywhere on site. No power point, no extension cord, no compromise.

    210mm Blade Size
    HP Brushless Motor
    45° Bevel Capacity
    18V Battery Platform
    Product Overview

    The Ryobi 18V ONE+ HP Brushless Table Saw is a compact, portable 210mm table saw built specifically for jobsite use. Powered by a high-performance brushless motor and any Ryobi 18V ONE+ battery, it delivers the cutting performance needed for ripping sheet material, crosscutting structural timber, and making accurate angled cuts, all without a power outlet within reach.


    The 210mm blade gives it genuine table saw capability in a footprint compact enough to carry to the next floor of a build or load into a ute tray. The rip fence, mitre gauge, and 45 degree bevel adjustment provide the accuracy and versatility expected from a stationary saw, packed into a cordless tool that moves with the job.

    HP Brushless
    High Performance Motor

    Corded Power Without the Cord

    The HP brushless motor is engineered to deliver sustained cutting power through hardwood framing, engineered sheet goods, and structural pine without stalling or losing speed mid-cut. Brushless technology means more energy goes into the blade and less is lost as heat, resulting in better performance per amp-hour and a motor that holds up across a full day on site. Paired with a high-capacity 18V ONE+ battery, runtime is genuinely practical for real jobsite use.

    Cutting Capacities
    57mm Depth at 90° Maximum straight cut depth through seasoned framing and sheet goods.
    40mm Depth at 45° Full bevel cut depth for mitre work, skirting, and angle joints.
    636mm Rip Capacity Rip sheets up to 636mm wide from the blade, covering full sheet ripping with a guide rail.
    0–45° Bevel Range Continuous bevel adjustment from square to 45 degrees with positive stops at common angles.
    Jobsite Table Saw vs Workshop Table Saw

    This Jobsite Table Saw

    • Fully cordless, goes wherever the job is
    • Compact enough to carry between floors and into tight spaces
    • Loads into a ute or van without a forklift
    • No power outlet or extension lead required
    • Set up and pack down in under a minute
    • 210mm blade handles the majority of site cutting tasks

    Cabinet / Workshop Saw

    • Requires 240V power, often a dedicated circuit
    • Heavy and fixed in place, not portable
    • Larger table surface for big sheet work
    • Better suited to high-volume production cutting
    • Longer setup and installation time
    • Not practical for on-site use or remote locations

    210mm Blade Capacity

    A full 210mm blade gives this saw genuine cutting depth, handling 90mm framing timber, plywood, MDF, laminate board, and most sheet goods encountered on a residential or commercial construction site.

    Adjustable Rip Fence

    The onboard rip fence locks parallel to the blade for accurate repeated rip cuts across the full width of the table. Essential for breaking down sheet goods and cutting consistent widths without a measuring tape on every pass.

    Mitre Gauge

    The included mitre gauge slides in the table slot and locks at any angle for accurate crosscuts and angled cuts. Positive stops at common angles including 45 and 90 degrees speed up repetitive cuts.

    45° Bevel Adjustment

    The blade tilts from 0 to 45 degrees with a locking mechanism that holds the angle firmly through the cut. Essential for skirting boards, architrave joins, and any application requiring angled cuts through material.

    Blade Guard and Riving Knife

    A full blade guard assembly with anti-kickback pawls and a riving knife keeps the cut kerf open and prevents timber from pinching the blade, the primary cause of kickback on table saws.

    Dust Port

    An integrated dust extraction port accepts standard vacuum hose connections. Effective dust capture at the source keeps the work area clear and improves cut line visibility during operation.

    Common Jobsite Applications

    Ripping plywood and MDF sheets

    Crosscutting framing timber

    Skirting and architrave mitre cuts

    Decking and flooring board cuts

    Laminate benchtop cutting

    Cabinet panel and shelving cuts

    Built-In Safety Features

    Full blade guard assembly with anti-kickback pawls
    Riving knife keeps cut kerf open and prevents blade pinch
    Blade guard removal tool required, no accidental removal
    Blade height and bevel locking mechanisms
    On/off switch with removable safety key
    Non-slip rubber feet for stable bench or floor use
    18V
    ONE+

    Part of the Ryobi 18V ONE+ System

    Compatible with all Ryobi 18V ONE+ batteries. For sustained cutting through hardwood framing and repeated sheet ripping, a high-capacity battery such as a 6Ah or 9Ah pack is strongly recommended to maximise runtime between charges on demanding jobsite cutting sessions.

    Technical Specifications
    Battery Voltage 18V (Ryobi ONE+)
    Motor Type Brushless (HP Series)
    Blade Size 210mm (8-1/4 inch)
    Arbor Size 16mm
    No-Load Speed 5,800 RPM
    Max Cut Depth at 90° 57mm
    Max Cut Depth at 45° 40mm
    Bevel Range 0 to 45 degrees
    Rip Capacity (right of blade) 636mm
    Table Dimensions 432mm x 368mm
    Blade Guard Yes, with anti-kickback pawls
    Riving Knife Yes
    Dust Port Yes (standard vacuum connection)
    Safety Key Yes (removable)
    Battery Included No (Tool Only)
    Charger Included No (Tool Only)
    Compatible Batteries All Ryobi 18V ONE+ batteries
    Warranty 3 Year Ryobi Warranty (when registered)
    What's in the Box
    • Ryobi 18V ONE+ HP Table Saw (Tool Only)
    • 210mm 24T carbide-tipped blade (fitted)
    • Rip fence
    • Mitre gauge
    • Blade guard assembly
    • Riving knife
    • Blade changing wrench
    • Push stick
    • Safety key
    • User manual
    Safety Note:  Always wear eye protection, hearing protection, and appropriate PPE when operating a table saw. Never remove the blade guard or riving knife during operation. Keep hands clear of the blade path at all times and use the push stick provided when ripping narrow stock. This is a Tool Only product. Battery and charger are not included.

    Recently viewed products

      Login

      Forgot your password?

      Don't have an account yet?
      Create account