🌍 Worldwide Shipping Available | Fast & Secure Delivery ✈️

Ryobi 18V ONE+ HP Transfer Pump 2,271L/hr Tool Only - for Fast Water Transfer

Description

Ryobi 18V ONE+ HP Transfer Pump 2,271L/hr Tool Only
18V ONE+ HP Series

Ryobi 18V ONE+ HP Transfer Pump
2,271 L/hr Tool Only

A brushless-powered transfer pump built for fast, clean water movement. Whether you're topping up a tank, draining a pool, or redirecting water across the property, the HP motor delivers consistent high-volume flow without the cords or the noise of a petrol pump.

2,271 Litres / Hour
HP Brushless Motor
25mm Outlet Size
18V Battery Platform
Product Overview

The Ryobi 18V ONE+ HP Transfer Pump is a high-performance, brushless cordless pump designed for efficient water transfer across a wide range of residential, agricultural, and worksite applications. With a flow rate of 2,271 litres per hour, it moves large volumes of clean water quickly and reliably, powered entirely by your existing Ryobi 18V ONE+ battery.


Unlike the submersible pump in the Ryobi range, this transfer pump is designed for above-ground use, drawing water from a source such as a tank, dam, pool, or rainwater system and pushing it where it needs to go. It's a purpose-built tool for water transfer tasks where speed, portability, and freedom from mains power are priorities.

HP Brushless
High Performance Motor

More Flow, Less Battery Drain

The brushless HP motor transfers more energy into pumping action and less into heat, meaning faster flow rates and longer runtimes per charge compared to conventional brushed pump motors. It also runs cooler under sustained load, making it better suited to longer transfer sessions where a brushed motor would begin to degrade in performance.

Transfer Pump vs Submersible Pump

This Transfer Pump

  • Above-ground operation
  • Draws from a water source via inlet hose
  • Ideal for clean water transfer between locations
  • Tanks, dams, pools, rainwater systems
  • Designed for directed, controlled water movement
  • Brushless HP motor for sustained performance

Submersible Pump

  • Sits inside the water source
  • Designed to remove water from a flooded area
  • Ideal for drainage and water removal tasks
  • Flooded spaces, pools, sumps, bilges
  • Handles dirty water with fine particles
  • Higher flow rate for rapid water removal

2,271 L/hr Flow Rate

High-volume water transfer that moves serious amounts of water in a short time. Fill a 1,000 litre tank in under 30 minutes under ideal conditions.

Fully Cordless Operation

Powered by any Ryobi 18V ONE+ battery, it operates anywhere without extension cords or a generator. Ideal for rural properties, large gardens, and remote sites.

25mm Inlet and Outlet

Standard 25mm hose fittings for straightforward connection to garden hose systems and standard irrigation fittings. No adaptors required for most setups.

Self-Priming Capable

Primes quickly without needing the pump body to be manually filled before each use, saving time when setting up at a new location or after dry storage.

Compact and Easy to Position

Lightweight enough to move by hand and position close to the water source. No fixed installation required. Set it up in minutes and reposition as the job demands.

Clean Water Design

Engineered specifically for clean water transfer. The impeller and pump housing are optimised for clear water applications, delivering consistent performance without risk of clogging from clean sources.

Common Applications
Filling water tanks and troughs
Transferring from dam or creek to storage
Draining swimming pools and spas
Rainwater tank redistribution
Garden and lawn irrigation
Livestock and animal water supply
18V
ONE+

Part of the Ryobi 18V ONE+ System

Compatible with all Ryobi 18V ONE+ batteries. For extended transfer sessions, a high-capacity battery such as a 5Ah or 9Ah pack is recommended to maximise runtime and keep the water flowing without interruption.

Technical Specifications
Battery Voltage 18V (Ryobi ONE+)
Motor Type Brushless (HP Series)
Flow Rate (Max) 2,271 L/hr
Pump Type Transfer (above-ground)
Water Type Clean water only
Inlet / Outlet Size 25mm (1 inch)
Self-Priming Yes
Battery Included No (Tool Only)
Charger Included No (Tool Only)
Compatible Batteries All Ryobi 18V ONE+ batteries
Warranty 3 Year Ryobi Warranty (when registered)
What's in the Box
  • Ryobi 18V ONE+ HP Transfer Pump (Tool Body)
  • User manual
Note:  This is a Tool Only product. Battery and charger are not included. Compatible with all Ryobi 18V ONE+ batteries, available separately. This pump is designed for clean water transfer only and is not suitable for dirty, debris-laden, or chemically treated water.

Ryobi 18V ONE+ HP Transfer Pump 2,271L/hr Tool Only - for Fast Water Transfer

Product form

Ryobi 18V ONE+ HP Transfer Pump 2,271L/hr Tool Only 18V ONE+ HP Series Ryobi 18V ONE+ HP Transfer Pump2,271 L/hr... Read more

In Stock  Express Post: 1-3 Days | Standard Post: 2-5 Days

$339.00

    • Guaranteed secure & safe checkout.

      paypal

      Description

      Ryobi 18V ONE+ HP Transfer Pump 2,271L/hr Tool Only
      18V ONE+ HP Series

      Ryobi 18V ONE+ HP Transfer Pump
      2,271 L/hr Tool Only

      A brushless-powered transfer pump built for fast, clean water movement. Whether you're topping up a tank, draining a pool, or redirecting water across the property, the HP motor delivers consistent high-volume flow without the cords or the noise of a petrol pump.

      2,271 Litres / Hour
      HP Brushless Motor
      25mm Outlet Size
      18V Battery Platform
      Product Overview

      The Ryobi 18V ONE+ HP Transfer Pump is a high-performance, brushless cordless pump designed for efficient water transfer across a wide range of residential, agricultural, and worksite applications. With a flow rate of 2,271 litres per hour, it moves large volumes of clean water quickly and reliably, powered entirely by your existing Ryobi 18V ONE+ battery.


      Unlike the submersible pump in the Ryobi range, this transfer pump is designed for above-ground use, drawing water from a source such as a tank, dam, pool, or rainwater system and pushing it where it needs to go. It's a purpose-built tool for water transfer tasks where speed, portability, and freedom from mains power are priorities.

      HP Brushless
      High Performance Motor

      More Flow, Less Battery Drain

      The brushless HP motor transfers more energy into pumping action and less into heat, meaning faster flow rates and longer runtimes per charge compared to conventional brushed pump motors. It also runs cooler under sustained load, making it better suited to longer transfer sessions where a brushed motor would begin to degrade in performance.

      Transfer Pump vs Submersible Pump

      This Transfer Pump

      • Above-ground operation
      • Draws from a water source via inlet hose
      • Ideal for clean water transfer between locations
      • Tanks, dams, pools, rainwater systems
      • Designed for directed, controlled water movement
      • Brushless HP motor for sustained performance

      Submersible Pump

      • Sits inside the water source
      • Designed to remove water from a flooded area
      • Ideal for drainage and water removal tasks
      • Flooded spaces, pools, sumps, bilges
      • Handles dirty water with fine particles
      • Higher flow rate for rapid water removal

      2,271 L/hr Flow Rate

      High-volume water transfer that moves serious amounts of water in a short time. Fill a 1,000 litre tank in under 30 minutes under ideal conditions.

      Fully Cordless Operation

      Powered by any Ryobi 18V ONE+ battery, it operates anywhere without extension cords or a generator. Ideal for rural properties, large gardens, and remote sites.

      25mm Inlet and Outlet

      Standard 25mm hose fittings for straightforward connection to garden hose systems and standard irrigation fittings. No adaptors required for most setups.

      Self-Priming Capable

      Primes quickly without needing the pump body to be manually filled before each use, saving time when setting up at a new location or after dry storage.

      Compact and Easy to Position

      Lightweight enough to move by hand and position close to the water source. No fixed installation required. Set it up in minutes and reposition as the job demands.

      Clean Water Design

      Engineered specifically for clean water transfer. The impeller and pump housing are optimised for clear water applications, delivering consistent performance without risk of clogging from clean sources.

      Common Applications
      Filling water tanks and troughs
      Transferring from dam or creek to storage
      Draining swimming pools and spas
      Rainwater tank redistribution
      Garden and lawn irrigation
      Livestock and animal water supply
      18V
      ONE+

      Part of the Ryobi 18V ONE+ System

      Compatible with all Ryobi 18V ONE+ batteries. For extended transfer sessions, a high-capacity battery such as a 5Ah or 9Ah pack is recommended to maximise runtime and keep the water flowing without interruption.

      Technical Specifications
      Battery Voltage 18V (Ryobi ONE+)
      Motor Type Brushless (HP Series)
      Flow Rate (Max) 2,271 L/hr
      Pump Type Transfer (above-ground)
      Water Type Clean water only
      Inlet / Outlet Size 25mm (1 inch)
      Self-Priming Yes
      Battery Included No (Tool Only)
      Charger Included No (Tool Only)
      Compatible Batteries All Ryobi 18V ONE+ batteries
      Warranty 3 Year Ryobi Warranty (when registered)
      What's in the Box
      • Ryobi 18V ONE+ HP Transfer Pump (Tool Body)
      • User manual
      Note:  This is a Tool Only product. Battery and charger are not included. Compatible with all Ryobi 18V ONE+ batteries, available separately. This pump is designed for clean water transfer only and is not suitable for dirty, debris-laden, or chemically treated water.

      Recently viewed products

        Login

        Forgot your password?

        Don't have an account yet?
        Create account