In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Note :If you are working on a wooden floor, you will need to use the Fix-A-Floor Polyurethane For Loose, Squeaky Wood Flooring Repair. You can purchase it here.
Fix-A-Floor Repair Adhesive " Now Patented", is an Extra Strength Bonding Adhesive customized for the specific use of Re-Bonding loose and hollow tile, marble & stone without the expense and mess of removing or replacing them.
Fix-A-Floor is a simple do it yourself repair that is fast, easy and affordable not to mention fun and quite rewarding to anyone who can operate a drill, caulking gun and mix up a small batch of grout. Works on all sub-floor materials. Just Drill & Fill!
The TipThe Tip of the 10.1 oz. Fix-A-Floor tube has been specially designed and engineered with a pre-drilled 1/8" hole for the sole purpose of filling drilled holes in loose & hollow tile, marble & stone floors.
The Tip is extra firm and allows for a strong seal which promotes good flow and complete coverage. The 1/8" pre-drilled tip allows for use in narrow grout line applications or wider. It has marked lines showing clear cut points of 3/16", 1/4" or any other size you may need.
The AdhesiveFix-A-Floor Repair Adhesive is Strong & Flexible with elastomeric bonding properties to eliminate any future problems due to foundation settlement, expansion & contraction of the sub floor as well as poor original installation...
Used by professionals for years, now YOU can fix your loose & hollow, squeaky floors with Fix-A-Floor!!! Fix-A-Floor is Non-Toxic, Non-Flammable & Eco-Friendly!
Large problem area or small problem areas are no problem with Fix-A-Floor! Guaranteed for the life of your floor! Just Drill & Fill!
FAQs
Q: Will Fix-A-Floor work if I have heated floors?A: Yes! We have customers using Fix-A-Floor with heated floor elements all the time with no problems. Keep heating element off before, during & for 48 hrs. after applying. Q: Some of my grout is missing or completely gone? How can I use Fix-A-Floor?A: If bits and pieces of grout are missing here and there around the problem area, just go ahead and Drill & Fill, the adhesive will actually help to re-bond the bits that are cracking and loose. If your grout is completely gone we recommend lightly re-grouting the area allow to dry and then Drill & Fill! Q: Can I use Fix-A-Floor to fix my entire floor or just a small area?A: Fix-A-Floor works great on all size problem areas from 1 tile to the whole entire floor! Works on all types of Tile, Marble & Stone floors too! Q: Can I use Fix-A-Floor outside on my patio or deck?A: Yes! Fix-A-Floor works beautifully on interior and exterior applications. Q: Can I use Fix-A-Floor in my shower or Pool?A: No! Fix-A-Floor is not recommended for areas with exposed to excessive moisture. Q: Is Fix-A-Floor Safe?A: Yes! Fix-A-Floor is a non-toxic, non-flammable and Eco-Friendly water-based adhesive. Q: Can I use Fix-A-Floor to re-glue a tile that is off the floor?A: Yes, simply squeeze Fix-A-Floor onto the floor where the tile was and press the tile back down onto the floor, place weight and allow to dry for 24 hrs. Tile will be rebonded! Q: Do I have to place buckets of water on my floor after I Drill & Fill?A: It is recommended you place some kind of weight on the area to aid in curing and to be sure no excess adhesive is trapped under your floor before regrouting. It is not mandatory. Q: What if I don’t see the adhesive coming up out of the other holes?A: While filling Fix-A-Floor will usually come up and out of the other drilled holes. If this does not happen move to another hole and continue to fill, the adhesive is still travelling under the floor. If you see the adhesive coming back up out of the hole you are filling, be sure you are NOT pressing the tip of the tube down onto the subfloor. Q: What if the adhesive is clumpy or not flowing out of the tube properly?A: The adhesive in the tube has frozen either in transit during the cold winter months this can happen. Simply contact us for a replacement.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Introducing the new 3M CLAW™ Drywall Picture Hanger! Trust your heavyweight hanging projects to the 3M CLAW™ Drywall Picture Hanger proven to hold up to 15, 25 and 45 pounds. The engineered hardened steel claws lock securely into drywall anywhere – just push, hang and you’re done.
HARDENED STEEL - Claws lock into drywall anywhere.
PROVEN HOLD - Trusted strength up to 45 pounds
NO TOOLS – just push in with your thumbs
NO STUDS – Hang anywhere on drywall
NO REGRETS – No big holes left in your walls
NO MEASURING - Includes 1 Spot Marker to mark where the mirror or art piece will hang before installing the hanger
AWARD WINNING - Popular Science: “Best of What’s New” Award. Best New Product Award for Picture Hanging Category in a 2021 BrandSpark® survey. Product of the Year Winner: Home Improvement Category. Survey of 40,000 people by Kantar.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Introducing the new 3M CLAW™ Drywall Picture Hanger! Trust your heavyweight hanging projects to the 3M CLAW™ Drywall Picture Hanger proven to hold up to 15, 25 and 45 pounds. The engineered hardened steel claws lock securely into drywall anywhere – just push, hang and you’re done.
HARDENED STEEL - Claws lock into drywall anywhere.
PROVEN HOLD - Trusted strength up to 45 pounds
NO TOOLS – just push in with your thumbs
NO STUDS – Hang anywhere on drywall
NO REGRETS – No big holes left in your walls
NO MEASURING - Includes 1 Spot Marker to mark where the mirror or art piece will hang before installing the hanger
AWARD WINNING - Popular Science: “Best of What’s New” Award. Best New Product Award for Picture Hanging Category in a 2021 BrandSpark® survey. Product of the Year Winner: Home Improvement Category. Survey of 40,000 people by Kantar.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Introducing the new 3M CLAW™ Drywall Picture Hanger! Trust your heavyweight hanging projects to the 3M CLAW™ Drywall Picture Hanger proven to hold up to 15, 25 and 45 pounds. The engineered hardened steel claws lock securely into drywall anywhere – just push, hang and you’re done.
HARDENED STEEL - Claws lock into drywall anywhere.
PROVEN HOLD - Trusted strength up to 45 pounds
NO TOOLS – just push in with your thumbs
NO STUDS – Hang anywhere on drywall
NO REGRETS – No big holes left in your walls
NO MEASURING - Includes 1 Spot Marker to mark where the mirror or art piece will hang before installing the hanger
AWARD WINNING - Popular Science: “Best of What’s New” Award. Best New Product Award for Picture Hanging Category in a 2021 BrandSpark® survey. Product of the Year Winner: Home Improvement Category. Survey of 40,000 people by Kantar.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Introducing the new 3M CLAW™ Drywall Picture Hanger! Trust your heavyweight hanging projects to the 3M CLAW™ Drywall Picture Hanger proven to hold up to 15, 25 and 45 pounds. The engineered hardened steel claws lock securely into drywall anywhere – just push, hang and you’re done.
HARDENED STEEL - Claws lock into drywall anywhere.
PROVEN HOLD - Trusted strength up to 45 pounds
NO TOOLS – just push in with your thumbs
NO STUDS – Hang anywhere on drywall
NO REGRETS – No big holes left in your walls
NO MEASURING - Includes 1 Spot Marker to mark where the mirror or art piece will hang before installing the hanger
AWARD WINNING - Popular Science: “Best of What’s New” Award. Best New Product Award for Picture Hanging Category in a 2021 BrandSpark® survey. Product of the Year Winner: Home Improvement Category. Survey of 40,000 people by Kantar.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Introducing the new 3M CLAW™ Drywall Picture Hanger! Trust your heavyweight hanging projects to the 3M CLAW™ Drywall Picture Hanger proven to hold up to 15, 25 and 45 pounds. The engineered hardened steel claws lock securely into drywall anywhere – just push, hang and you’re done.
HARDENED STEEL - Claws lock into drywall anywhere.
PROVEN HOLD - Trusted strength up to 45 pounds
NO TOOLS – just push in with your thumbs
NO STUDS – Hang anywhere on drywall
NO REGRETS – No big holes left in your walls
NO MEASURING - Includes 1 Spot Marker to mark where the mirror or art piece will hang before installing the hanger
AWARD WINNING - Popular Science: “Best of What’s New” Award. Best New Product Award for Picture Hanging Category in a 2021 BrandSpark® survey. Product of the Year Winner: Home Improvement Category. Survey of 40,000 people by Kantar.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Introducing the new 3M CLAW™ Drywall Picture Hanger! Trust your heavyweight hanging projects to the 3M CLAW™ Drywall Picture Hanger proven to hold up to 15, 25 and 45 pounds. The engineered hardened steel claws lock securely into drywall anywhere – just push, hang and you’re done.
HARDENED STEEL - Claws lock into drywall anywhere.
PROVEN HOLD - Trusted strength up to 45 pounds
NO TOOLS – just push in with your thumbs
NO STUDS – Hang anywhere on drywall
NO REGRETS – No big holes left in your walls
NO MEASURING - Includes 1 Spot Marker to mark where the mirror or art piece will hang before installing the hanger
AWARD WINNING - Popular Science: “Best of What’s New” Award. Best New Product Award for Picture Hanging Category in a 2021 BrandSpark® survey. Product of the Year Winner: Home Improvement Category. Survey of 40,000 people by Kantar.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Introducing the new 3M CLAW™ Drywall Picture Hanger! Trust your heavyweight hanging projects to the 3M CLAW™ Drywall Picture Hanger proven to hold up to 15, 25, 45 & 65 pounds. The engineered hardened steel claws lock securely into drywall anywhere – just push, hang and you’re done.
HARDENED STEEL - Claws lock into drywall anywhere.
PROVEN HOLD - Trusted strength up to 45 pounds
NO TOOLS – just push in with your thumbs
NO STUDS – Hang anywhere on drywall
NO REGRETS – No big holes left in your walls
NO MEASURING - Includes 1 Spot Marker to mark where the mirror or art piece will hang before installing the hanger
AWARD WINNING - Popular Science: “Best of What’s New” Award. Best New Product Award for Picture Hanging Category in a 2021 BrandSpark® survey. Product of the Year Winner: Home Improvement Category. Survey of 40,000 people by Kantar.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Can I use Command™ Products on glass windows?
It is okay to use Command™ Products if the glass is not exposed to direct sunlight and not flooded with water. For glass shower doors use our special Water-Resistant line of products (blue strip) which are clearly marked on our packaging.
Will Command™ Products stick to brick?
No. Command™ Products are intended for mostly smooth surfaces such as those listed above. However, our products will stick to painted, smooth cinder block (the type found inside many school and office buildings).
Can I use Command™ Products on fresh paint?
Paint should be fully cured (check paint can for manufacturer's cure time) before using Command Products. We recommend waiting 28 days before use on fresh paint. Also, alcohol may remove or dull the surface of fresh paint.
Can I use Command™ Products on wallpaper?
No. Most wallpapers are too delicate and can tear when adhesives are applied.
Will it hold soundproofing acoustic foam board or decorative plates?
Yes, provided the item is within the weight limit specified for Command™ Picture Hanging Strips. We do not recommend hanging tapestry or other fabrics. For decorative plates, please ensure there is a smooth surface for the strip to adhere to. Do not hang valuable or irreplaceable items.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Can I use Command™ Products on glass windows?
It is okay to use Command™ Products if the glass is not exposed to direct sunlight and not flooded with water. For glass shower doors use our special Water-Resistant line of products (blue strip) which are clearly marked on our packaging.
Will Command™ Products stick to brick?
No. Command™ Products are intended for mostly smooth surfaces such as those listed above. However, our products will stick to painted, smooth cinder block (the type found inside many school and office buildings).
Can I use Command™ Products on fresh paint?
Paint should be fully cured (check paint can for manufacturer's cure time) before using Command Products. We recommend waiting 28 days before use on fresh paint. Also, alcohol may remove or dull the surface of fresh paint.
Can I use Command™ Products on wallpaper?
No. Most wallpapers are too delicate and can tear when adhesives are applied.
Will it hold soundproofing acoustic foam board or decorative plates?
Yes, provided the item is within the weight limit specified for Command™ Picture Hanging Strips. We do not recommend hanging tapestry or other fabrics. For decorative plates, please ensure there is a smooth surface for the strip to adhere to. Do not hang valuable or irreplaceable items.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Durabond is moisture curing, high strength, polyurethane construction adhesive. It has high strength and water resistance making it excellent for jobs requiring extra durability, both interior and exterior.Durabond is sandable, paintable and stainable. It is suitable for bonding wood to almost anything. A superior adhesive, it is also excellent for bonding
Features
Super Durable
High Strength
100% waterproof* – *(not for permanent water immersion)
Bonds wood to almost anything
Acid & chemical Resistant – PVA’s break down with acid/alkaline contact
Versatile can be used to bond surfaces other than wood
Heat resistant up to 140 deg
Generous working time (10 minutes)
Expands as it dries
Sandable – easy, will not clog sandpaper like other PVA emulsion glues
Paintable
Stainable after sanding
The product is a brown liquid and turns a light yellow when fully cured
Can be used for gap filling
Can Also be used to bond surfaces other than wood I.e metal to metal
Bonds MDF
Non-Toxic (once fully cured)
Where can this product be used?
Interior and exterior
Sauna or cabinet repairs in high heat areas
Bonding Timber to other surfaces (metal etc)
Cubby House with metal roof & floor lining
Planter boxes
Steps leading off a verandah
Timber letterbox to a metal support frame
Window frame
Decorative timber to a pergola
Interior panels of a boat
Repairing wooden boat oars
Repairing wooden handles on tools
Timber joinery
Laminating chopping boards
Requires atmospheric moisture to cure, therefore use may be restricted in dry conditions (refer to tips for advice)
Cannot be used if application temperature is below 5°C
For best results, one surface should be porous
Not suitable for below waterline applications or continuous submersion, for this we recommend Knead-It Aqua
Not recommended for structural applications
Not recommended for vertical projects due to runny consistency
While Aquadhere Durabond can adhere to damp surfaces excess moisture can result in increased foaming and a weakened joint. Ensure tight clamping or weighting to reduce foaming
Surfaces should be clamped tightly or weighted
What materials is this product suitable for?
MDF
Glass
Metal
Concrete
Ceramic
Most plastics (will not adhere to polyethylene or polypropylene, test other plastics first).
All timbers
How to use this product
Surfaces to be bonded must be close fitting, clean, dust and grease free.
Wipe very dry porous surfaces with a damp cloth 1 minute before bonding.
Apply a thin layer of adhesive evenly to one surface only. Glue expands and foams as it cures.
Assemble parts together within 10 minutes and clamp firmly or weight to hold until cured.
Wipe nozzle clean and seal container tightly. (to prevent remaining product from hardening in the container).
Wipe away any excess adhesive immediately with acetone. After drying, any excess adhesive can only be removed by scraping, sanding, filing or cutting.
Clean tools with acetone or white turpetine immediatly after use (before adhesive dries).
Handy tips
1L covers approx. 8m2
It is advisable to wear gloves (adhesive bonds to skin and is extremely difficult to remove from skin).
For bonding with smooth surface materials such as glass, plastics or metals, we suggested sanding or roughening the surface.
The tighter you clamp, the better bond you will obtain (as Durabond expands).
Wipe nozzle clean and seal container tightly. (to prevent remaining product from hardening in the container.)
Wipe oily timber surfaces with acetone on a clean rag to remove any surface oils & allow to dry before applying adhesive.
In extremely dry conditions or for extremely dry surfaces (eg terracotta) wipe surfaces with a damp rag prior to bonding to ensure sufficent moisture is present to cure product. Surfaces should not be wet.
It is recommended to use the entire contents of a pack within 6 months of opening. Product may form a hard skin on the surface during this period. Usable material is normally still present beneath this skin and can be accessed by breaking the hardened layer.
For cleaning surfaces prior to application of adhesive, if the surface is porous, we would recommend using SELLEYS Liquid Sugar Soap. If the surface is non-porous eg glass or metal, firstly clean the surface with mineral turpentine and then again with methylated spirits. If there is old, difficult to remove residue such as old paint, we recommend using paint stripper such as SELLEYS Kwik Strip Smart. Ensure the surface is dry before applying the product.
If glue comes in contact with hands, use acetone or white spirits to remove immediately and then rinse off with soapy water followed by hand creme. Alternatively wipe hands regularly while using Aquadhere Durabond. Once cured, adhesive is extremely difficult to remove from skin.
If cured material is discovered on the skin, then rub vegetable oil or Vitamin E cream into the area repeatedly to accelerate the natural process of the skin shedding, which will in turn cause the cured product to fall off.
Safety tips
Contains organic isocyanate polymers.
On contact, uncured adhesive can irritate eyes. If in eyes, flood the eyes for at least 15 minutes and seek medical advice.
Avoid contact with skin, if contact occurs, remove contaminated clothing or flush skin and hair with running water.
Avoid breathing vapours. Ensure use in a well-ventilated area. Product releases methyl ethyl ketoxime while curing.
For advice, contact a Poisons Information Centre (AUS 131 126; NZ 0800 764 766) or a doctor.
Warning: this product contains organic isocyanate polymers. This product has been classified as hazardous according to the criteria of NOHSC and HSNO. For further detail on the safe use of this product, please refer to the Material Safety Data Sheet, which can be downloaded from this site.
Keep away from children.
Storage and re-use
Clean tools with acetone or white spirit immediately after use (before adhesive dried).
Storage – For maximum shelf life store inside at moderate temperatures in dry conditions. Keep tightly closed to prevent moisture and air contact.
It is recommended to use the entire contents of a pack within 6 months of opening. Product may form a hard skin on the surface during this period. Usable material is normally still present beneath this skin and can be accessed by breaking the hardened layer.materials other than wood.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Industrial grade PVA, especially developed for use by professional woodworkers and craftsmen, for large projects. Off-white in colour, drying to a light coloured clear film.
Features
Excellent performance properties for repairs or building projects
No mixing required
Suitable for exterior use in non-structural applications
Heat resistant to 110°C (bonds will not weaken in exposure to direct summer sun)
Can be chiselled, routed or turned
Suitable for end grain gluing – won’t stain timber, cream in colour, but dries clear with a slight yellow tint
Non-toxic
Sandable – will not clog sandpaper like other PVA emulsion glues
More water resistant than Aquadhere interior
Has a higher heat resistance than Aquadhere interior
Paintable
Provides a stronger bond than Aquadhere interior for larger jobs
Bonds MDF
Weather resistant
Cleans up with water
Where can this product be used?
Cabinet and furniture making
Timber letterbox
Making a bookshelf
Restoring furniture
Gluing cupboard shelves for additional support
Repairing a door frame or window
Repairing or building wooden outdoor furniture
Indoor furniture
Storage chest for tools
Pot plant stand
Dog kennel
Bed heads
Timber joinery
Wooden toys
Unsuitable for use on coated wallpaper overlaps eg vinyl
Will not take common timber stains
Not recommended for joints that are subjected to constant high stress. Instead, use Selleys 308 High Stress wood glue
Not suitable for below waterline applications or continuous submersion. We recommend Selleys Knead It Aqua for these situations.
What materials is this product suitable for?
Softwoods
Plywood
Joinery
Hardwoods
MDF
Laminating
Particleboard
Dowelling
Veneering
Chipboard
How to use this product
Surfaces to be bonded must be close fitting, free from dust, dry and clean from grease.
Shake bottle before use
Apply adhesive liberally to one surface only, position surfaces and press together while still wet. Immediately clamp for 30 minutes for softwoods and 1 hour for hardwoods. Alternatively, low clamping pressures (50lbs/in2) can be used with softwoods; higher pressures are recommended for hardwoods (100 – 150lbs/in2). Do not stress joint for 12 hours.
Wipe off excess adhesive while still wet with a damp cloth. If the wood is to be stained, any residual Aquadhere left on the timber surface may prevent the stain from taking to the wood.
Maximum strength is achieved after 12 hours, but longer in cold, damp conditions, or when used on dense timbers.
Clean all tools with water before adhesive is allowed to dry. If dry, soak in water until adhesive is soft.
Cure slows significantly in humid, cold conditions.
Handy tips
1L covers approx. 5m2
To fill small gaps, Aquadhere can be mixed with sawdust.
Longer clamping times may be required for joints under high stress, or alternatively use 308 High Stress Wood Glue.
Avoid contaminating Aquadhere Exterior with iron and steel, eg nails, etc. Aquadhere contaminated with rust (iron oxide) will stain brown/black in the presence of tannins in many woods.
Painting or varnishing constructions made of porous softwoods will improve the resistance of bonds to water exposure.
On very porous surfaces applying a thin layer to each side and allowing to soaking in before applying a second layer to one side only may result in a stronger bond.
If you are gluing over a larger surface, try using a small roller to aid in application.
For cleaning surfaces prior to application of adhesive, if the surface is porous, we would recommend using Selleys Liquid Sugar Soap. If the surface is non-porous eg glass or metal, firstly clean the surface with mineral turpentine and then again with methylated spirits. If there is old, difficult to remove residue such as old paint, we recommend using paint stripper such as Selleys Kwik Strip Smart. Ensure the surface is dry before applying the product.
Keep a canister of Selleys Hand Kleen Wipes nearby for a quick and effective cleanup.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Industrial grade PVA, especially developed for use by professional woodworkers and craftsmen, for large projects. Off-white in colour, drying to a light coloured clear film.
Features
Excellent performance properties for repairs or building projects
No mixing required
Suitable for exterior use in non-structural applications
Heat resistant to 110°C (bonds will not weaken in exposure to direct summer sun)
Can be chiselled, routed or turned
Suitable for end grain gluing – won’t stain timber, cream in colour, but dries clear with a slight yellow tint
Non-toxic
Sandable – will not clog sandpaper like other PVA emulsion glues
More water resistant than Aquadhere interior
Has a higher heat resistance than Aquadhere interior
Paintable
Provides a stronger bond than Aquadhere interior for larger jobs
Bonds MDF
Weather resistant
Cleans up with water
Where can this product be used?
Cabinet and furniture making
Timber letterbox
Making a bookshelf
Restoring furniture
Gluing cupboard shelves for additional support
Repairing a door frame or window
Repairing or building wooden outdoor furniture
Indoor furniture
Storage chest for tools
Pot plant stand
Dog kennel
Bed heads
Timber joinery
Wooden toys
Unsuitable for use on coated wallpaper overlaps eg vinyl
Will not take common timber stains
Not recommended for joints that are subjected to constant high stress. Instead, use Selleys 308 High Stress wood glue
Not suitable for below waterline applications or continuous submersion. We recommend Selleys Knead It Aqua for these situations.
What materials is this product suitable for?
Softwoods
Plywood
Joinery
Hardwoods
MDF
Laminating
Particleboard
Dowelling
Veneering
Chipboard
How to use this product
Surfaces to be bonded must be close fitting, free from dust, dry and clean from grease.
Shake bottle before use
Apply adhesive liberally to one surface only, position surfaces and press together while still wet. Immediately clamp for 30 minutes for softwoods and 1 hour for hardwoods. Alternatively, low clamping pressures (50lbs/in2) can be used with softwoods; higher pressures are recommended for hardwoods (100 – 150lbs/in2). Do not stress joint for 12 hours.
Wipe off excess adhesive while still wet with a damp cloth. If the wood is to be stained, any residual Aquadhere left on the timber surface may prevent the stain from taking to the wood.
Maximum strength is achieved after 12 hours, but longer in cold, damp conditions, or when used on dense timbers.
Clean all tools with water before adhesive is allowed to dry. If dry, soak in water until adhesive is soft.
Cure slows significantly in humid, cold conditions.
Handy tips
1L covers approx. 5m2
To fill small gaps, Aquadhere can be mixed with sawdust.
Longer clamping times may be required for joints under high stress, or alternatively use 308 High Stress Wood Glue.
Avoid contaminating Aquadhere Exterior with iron and steel, eg nails, etc. Aquadhere contaminated with rust (iron oxide) will stain brown/black in the presence of tannins in many woods.
Painting or varnishing constructions made of porous softwoods will improve the resistance of bonds to water exposure.
On very porous surfaces applying a thin layer to each side and allowing to soaking in before applying a second layer to one side only may result in a stronger bond.
If you are gluing over a larger surface, try using a small roller to aid in application.
For cleaning surfaces prior to application of adhesive, if the surface is porous, we would recommend using Selleys Liquid Sugar Soap. If the surface is non-porous eg glass or metal, firstly clean the surface with mineral turpentine and then again with methylated spirits. If there is old, difficult to remove residue such as old paint, we recommend using paint stripper such as Selleys Kwik Strip Smart. Ensure the surface is dry before applying the product.
Keep a canister of Selleys Hand Kleen Wipes nearby for a quick and effective cleanup.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
PVA adhesive specially formulated for interior woodworking repairs and projects. White in colour, dries clear and cleans up easily with water.
Features
No mixing required – Ready to use straight from the pack
Suitable for end grain gluing – won’t stain timber, white in colour, but dries clear.
Non-toxic
Dries Clear
Cleans up with water
Where can this product be used?
School projects and craft
Furniture repairs
Repair a split trim
Fix a broken photo frame
Restoring furniture
Fix a wobbly chair
Gluing cupboard shelves for additional support
Repairing a door frame or window
Fix a wine rack
Re-attach book cover/spine or repair torn bindings
Fix a broken drawer
Wooden toy repairs
Craft projects
Unsuitable for use on coated wallpaper overlaps eg vinyl
Although Aquadhere is reasonably water resistant, it is not recommended for use in water or weather exposed situations or for any job where maximum water resistance is required (for weather exposed and/or wet areas we recommend Aquadhere exterior or Aquadhere Durabond).
Will not take common timber stains
Aquadhere is not recommended for joints that are subjected to constant high stress. Instead, use Selleys 308 High Stress wood glue.
Do not use on projects that you need to be able to sand, as Aquadhere Interior is not sandable.
Will not bond MDF, we recommend using Aquadhere Exterior
What materials is this product suitable for?
End grain gluing
Craftwork
Cloth
Paper
Mosaics
Leather
Other craft materials
How to use this product
Surfaces to be bonded must be close fitting, free from dust, dry and clean from grease.
Shake bottle before use
Apply adhesive liberally to one surface only, position surfaces and press together while still wet. Immediately clamp for 30 minutes for softwoods and 1 hour for hardwoods. Alternatively, low clamping pressures (50lbs/in2) can be used with softwoods; higher pressures are recommended for hardwoods (100 – 150lbs/in2). Do not stress joint for 12 hours.
Wipe off excess adhesive while still wet with a damp cloth. If the wood is to be stained, any residual Aquadhere left on the timber surface may prevent the stain from taking to the wood.
Maximum strength is achieved after 12 hours, but longer in cold, damp conditions, or when used on dense timbers.
Cure slows significantly in humid, cold conditions.
Clean all tools with water before adhesive is allowed to dry. If dry, soak in water until adhesive is soft.
Handy tips
1L covers approx. 8m2
To fill small gaps, Aquadhere can be mixed with sawdust.
Longer clamping times may be required for joints under high stress, or alternatively use Selleys 308 High Stress Wood Glue.
Avoid contaminating Aquadhere with iron and steel, eg nails, etc. Aquadhere contaminated with rust (iron oxide) will stain brown/black in the presence of tannins in many woods.
On very porous surfaces applying a thin layer to each side and allowing to soaking in before applying a second layer to one side only may result in a stronger bond
Cured adhesive can be resoftened by prolonged contact with hot water or steam.
Sanding isn’t an effective way to prepare for gluing, as it often leaves an uneven surface and may clog the timber which can stop the glue from penetrating and impact on your result. A straight router can be used to trim the edge, but be sure to only remove as much as required to obtain a suitable edge for gluing.
If you are gluing over a larger surface, try using a small roller to aid in application.
For cleaning surfaces prior to application of adhesive, if the surface is porous, we would recommend using SELLEYS Liquid Sugar Soap. If the surface is non-porous eg glass or metal, firstly clean the surface with mineral turpentine and then again with methylated spirits. If there is old, difficult to remove residue such as old paint, we recommend using paint stripper such as SELLEYS Kwik Strip Smart. Ensure the surface is dry before applying the product.
Keep a canister of SELLEYS Sugar Soap Wipes nearby for a quick and effective cleanup.
Safety tips
Aquadhere is considered a non-hazardous material.
In case of eye contact, hold eye open and flush with plenty of water for 15 minutes.
Storage and re-use
For maximum shelf life store inside at moderate temperatures. Do not allow to freeze.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
A fast setting strong and durable two part epoxy, general purpose adhesive. Mixed product gels in 5 minutes. Initial bonding is achieved in 20 minutes with maximum bond strength after 16 hours.
Features
Araldite is stronger than other glues due to the chemical reaction of the two parts
Bonds a variety of surfaces
Dries Clear
Quick setting in 5 minutes
No clamping necessary
Moderate water resistance
Forms a rigid, durable bond
Can be used for gap filling (surfaces need not mate closely)
Good chemical resistance
Appearance
Clear with a slight yellow tinge
Where can this product be used?
Bakelite – joining or repairing
Bonding shells, stones or pebbles to decorate bottles, lamps, bricks or garden pots
Repairing splits or cracks in a tennis racket
Repairing metal toys
Not suitable for bonding plastics such as Polypropylene and Polyethylene
Bond strength weakens above 65°C but strength is regained when temperature drops
What materials is this product suitable for?
Glass
Metal
Wood
Fabric
Rigid Plastic
Crystal
Leather
How to use this product
General Use
Before applying the Araldite mixture, all surfaces MUST be thoroughly clean and dry.
All traces of grease, rust paint, etc. should be removed.
For best results, smooth surfaces should be roughened by mechanical abrasion after solvent cleaning.
Onto a clean, disposable surface (e.g. polyethylene or cardboard), dispense equal volumes of Part A and Part B. Thoroughly mix together with a spatula, nail or stick. When using the tubes it is essential to use the correct mixing ratio, i.e. 1 part each
Apply adhesive immediately to both surfaces and press together. Clamping is not necessary, but allow bond to remain undisturbed for at least 20 minutes. Scrape off excess adhesive and wipe mixing utensils immediately.
When using the Araldite 5ml Everyday tube, ensure correct caps are replaced on each tube or they will harden.
To use Selleys Araldite Singles:
Fold – the pack in half, so that foil is back to back.
Tear – carefully along perforations.
Squeeze – bubbles to extrude adhesive.
Mix – two parts together until well combined.
Apply – mixed adhesive to surfaces and bring together. Wipe off excess adhesive and do not apply undue strain to bond for 30 minutes.
Handy tips
For maximum working time, mix in small quantities. Large quantities accelerate the curing process and reduce working time.
To extend product life replace caps immediately after use. Ensure you wipe excess from nozzle with a tissue dipped in acetone (or nail polish remover) before replacing the caps.
When using the tube variant, ensure you replace the correct cap on the correct tube. Placing the wrong cap on the wrong tube will cause the tube to harden. (lids and tubes are colour coded to help)
Wipe off any uncured araldite with acetone or nail polish remover.
To remove product after cure, mechanical action (scraping or sanding) is recommended. Since the product is chemically resistant solvent will NOT dissolve this product.
To reposition the bond once cured, check that the item is heat resistant. If safe, heat the item slowly, e.g. in an oven, to at least 150oC. The product will soften and liquify slightly. Scrape off any excess then reposition the joint carefully using appropriate safety equipment. Allow the item to cool down in the correct position. The product will reharden once returned to room temperature.
Clamping is recommended for a stronger bond.
Singles are great for those unexpected household breakages, so keep them at home, just in case.
Keep a box of Selleys Sugar Soap Wipes around for quick & effective clean up.
For cleaning surfaces prior to application of adhesive, if the surface is porous, we would reccomend using Selleys Liquid Sugar Soap. If the surface is non-porous eg glass or metal, firstly clean the surface with Methylated Spirits. If there is old difficult to remove residue such as oold paint, we recommend using paint stripper such as Selleys Kwik Strip Smart. Ensure the surface is dry before applying the product.
Safety tips
Avoid contact with the skin and eyes.
Avoid breathing vapour.
Do not use solvents near eyes or open wounds.
In case of contact with eyes, flush with water for at least 15 minutes and seek medical attention.
Non toxic when set.
For further information refer to the Material Safety Data Sheet (MSDS).
Storage and re-use
Ensure caps are replaced and product stored in a cool dry place.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
A fast setting strong and durable two-part epoxy, general purpose adhesive. Mixed product gels in 5 minutes. Initial bonding is achieved in 20 minutes with maximum bond strength after 16 hours.
Features:
Araldite is stronger than other glues due to the chemical reaction of the two parts
Bonds a variety of surfaces
Dries Clear
Quick setting in 5 minutes
No clamping necessary
Moderate water resistance
Forms a rigid, durable bond
Can be used for gap filling (surfaces need not mate closely)
Good chemical resistance
Appearance:
Clear with a slight yellow tinge
Where can this product be used?
Bakelite – joining or repairing
Bonding shells, stones or pebbles to decorate bottles, lamps, bricks or garden pots
Repairing splits or cracks in a tennis racket
Repairing metal toys
Not suitable for bonding plastics such as Polypropylene and Polyethylene
Bond strength weakens above 65°C but strength is regained when temperature drops
What materials is this product suitable for?
Glass
Metal
Wood
Fabric
Rigid Plastic
Crystal
Leather
How to use this product:
General Use
-Before applying the Araldite mixture, all surfaces MUST be thoroughly clean and dry.
-All traces of grease, rust paint, etc. should be removed.
-For best results, smooth surfaces should be roughened by mechanical abrasion after solvent cleaning.
-Onto a clean, disposable surface (e.g. polyethylene or cardboard), dispense equal volumes of Part A and Part B. Thoroughly mix together with a spatula, nail or stick.
Safety tips:
Avoid contact with the skin and eyes.
Avoid breathing vapour.
Do not use solvents near eyes or open wounds.
In case of contact with eyes, flush with water for at least 15 minutes and seek medical attention.
Non toxic when set.
For further information refer to the Material Safety Data Sheet (MSDS).
Storage and re-use
Ensure caps are replaced and product stored in a cool dry place.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
A fast setting strong and durable two-part epoxy, general purpose adhesive. Mixed product gels in 5 minutes. Initial bonding is achieved in 20 minutes with maximum bond strength after 16 hours.
Features:
Araldite is stronger than other glues due to the chemical reaction of the two parts
Bonds a variety of surfaces
Dries Clear
Quick setting in 5 minutes
No clamping necessary
Moderate water resistance
Forms a rigid, durable bond
Can be used for gap filling (surfaces need not mate closely)
Good chemical resistance
Appearance:
Clear with a slight yellow tinge
Where can this product be used?
Bakelite – joining or repairing
Bonding shells, stones or pebbles to decorate bottles, lamps, bricks or garden pots
Repairing splits or cracks in a tennis racket
Repairing metal toys
Not suitable for bonding plastics such as Polypropylene and Polyethylene
Bond strength weakens above 65°C but strength is regained when temperature drops
What materials is this product suitable for?
Glass
Metal
Wood
Fabric
Rigid Plastic
Crystal
Leather
How to use this product:
General Use
-Before applying the Araldite mixture, all surfaces MUST be thoroughly clean and dry.
-All traces of grease, rust paint, etc. should be removed.
-For best results, smooth surfaces should be roughened by mechanical abrasion after solvent cleaning.
-Onto a clean, disposable surface (e.g. polyethylene or cardboard), dispense equal volumes of Part A and Part B. Thoroughly mix together with a spatula, nail or stick.
Safety tips:
Avoid contact with the skin and eyes.
Avoid breathing vapour.
Do not use solvents near eyes or open wounds.
In case of contact with eyes, flush with water for at least 15 minutes and seek medical attention.
Non toxic when set.
For further information refer to the Material Safety Data Sheet (MSDS).
Storage and re-use
Ensure caps are replaced and product stored in a cool dry place.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
A very fast setting two part epoxy adhesive. Initial bonding achieved in 90 seconds with maximum bond strength after 16 hours.
Features
Araldite is stronger than other glues due to the chemical reaction of the two parts
Bonds a variety of surfaces
Dries Clear
Very quick setting in 90 seconds
No clamping necessary
Moderate water resistance
Forms a rigid, durable bond
Can be used for gap filling
Good chemical resistance
Where can this product be used?
General small household repairs
Fixing gemstones to mounts
Repairing metal toys
Not suitable for bonding plastics such as Polypropylene and Polyethylene
Bond strength weakens above 65°C but strength is regained when temperature drops
What materials is this product suitable for?
Glass
Metal
Wood
Fabric
Most Plastics
How to use this product
General Use
Before applying the Araldite mixture, all surfaces MUST be thoroughly clean and dry.
All traces of grease, rust paint, etc. should be removed.
For best results smooth surfaces should be roughened by mechanical abrasion after solvent cleaning.
Onto a clean, disposable surface (e.g. polyethylene or cardboard), dispense equal volumes of Part A and Part B. Thoroughly mix together with a spatula, nail or stick. When using the tubes it is essential to use the correct mixing ratio, i.e. 1 part each
Apply adhesive immediately to both surfaces and press together. Scrape off excess adhesive and wipe mixing utensils immediately.
Ensure correct caps are replaced on each tube or they will adhere.
Handy tips
Note: For information on how to identify plastics refer to the Selleys plastics guide.
For maximum working time, mix in small quantities. Large quantities accelerate the curing process and reduce working time.
To extend product life replace caps immediately after use. Ensure you wipe excess from nozzle with a tissue dipped in acetone (or nail polish remover) before replacing cap.
When using the tube variant, ensure you replace the correct cap on the correct tube. Placing the wrong cap on the wrong tube will cause the tube to harden. (lids and tubes are colour coded to help)
Wipe off any uncured Araldite with acetone or nail polish remover.
To remove product after cure, mechanical action (scraping or sanding) is recommended. Since the product is chemically resistant solvent will NOT dissolve this product.
To reposition the bond once cured, check that the item is heat resistant. If safe, heat the item slowly, e.g. in an oven, to at least 150oC. The product will soften and liquify slightly. Scrape off any excess then reposition the joint carefully using appropriate safety equipment. Allow the item to cool down in the correct position. The product will reharden once returned to room temperature.
Clamping recommended for a stronger bond.
Singles are great for those unexpected household breakages, so keep a couple at home just in case.
Keep a box of Selleys Sugar Soap Wipes around for quick & effective clean up
For cleaning surfaces prior to application of adhesive, if the surface is porous, we would recommend using Selleys Liquid Sugar Soap. If the surface is non-porous eg glass or metal, firstly clean the surface with Methylated Spirits. If there is old difficult to remove residue such as cold paint, we recommend using paint stripper such as Selleys Kwik Strip Smart. Ensure the surface is dry before applying the product.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
A two-part epoxy adhesive that bonds with maximum strength. Mixed product gels in 2 hours. Initial bonding is achieved in 6-8 hours with maximum bond strength after 3 days.
Features:
-Araldite is stronger than other glues due to the chemical reaction of the two parts
-Bonds a variety of surfaces
-Dries Clear
-Very Strong, durable bonding
-Very high water resistance (e.g. OK for fixing tiles around pool, but not below the water line. For this use Selleys Knead it Aqua)
-Forms a rigid, durable bond
-Can be used for gap filling (surfaces need not mate closely)
-Good chemical resistance
-Heat Resistant
-Clamping is recommended to achieve a stronger bond
-Not suitable for bonding plastics such as Polypropylene and Polyethylene
-Bond strength weakens above 80°C but strength is regained when temperature drops
Appearance:
Translucent
Where can this product be used?
-Load bearing repairs
-Gluing the head back on your hammer
-Fixing loose table or chair legs.
-Bonding solid pieces of Aluminium sheeting
-Bonding timber on your boat
-Repairing splits and cracks in Cricket bats
-Bonding fibreglass sheets
-Repairing Ski’s
-Fixing Dynabolts and metal rods into concrete
What materials is this product suitable for?
-Glass
-Metal
-Wood
-Fabric
-Rigid Plastic – will not bond to Polyethylene or Polypropylene plastics
-Crystal
-Leather
How to use this product
-Before applying the Araldite mixture, all surfaces MUST be thoroughly clean and dry.
-All traces of grease, rust paint, etc. should be removed.
-For best results, smooth surfaces should be roughened by mechanical abrasion after solvent cleaning.
-Onto a clean, disposable surface (e.g. polyethylene or cardboard), dispense equal volumes of Part A and Part B. Thoroughly mix together with a spatula, nail or stick. When using the tubes it is essential to use the correct mixing ratio, i.e. 1 part each
-Apply adhesive immediately to both surfaces and press together. Clamping is necessary while bond sets over 6-8 hours. Scrape off excess adhesive and wipe mixing utensils immediately.
Handy tips
-For a maximum working time, mix in small quantities. Large quantities accelerate the curing process and reduce working time.
-To extend product life replace caps immediately after use. Ensure you wipe excess from the nozzle with a tissue dipped in acetone (or nail polish remover) before replacing cap.
-When using the tube variant, ensure you replace the correct cap on the correct tube. Placing the wrong cap on the wrong tube will cause the tube to harden. (lids and tubes are colour coded to help)
-Wipe off any uncured Araldite with acetone or nail polish remover.
-To remove product after cure, mechanical action (scraping or sanding) is recommended. Since the product is chemically resistant solvent will NOT dissolve this product.
-To reposition the bond once cured, check that the item is heat resistant. If safe, heat the item slowly, e.g. in an oven, to at least 150oC. The product will soften and liquify slightly. -Scrape off any excess then reposition the joint carefully using appropriate safety equipment. Allow the item to cool down in the correct position. The product will reharden once returned to room temperature.
-Clamping recommended for a stronger bond.
-For cleaning surfaces prior to application of adhesive, if the surface is porous, we would recommend using Selleys Liquid Sugar Soap. If the surface is non-porous eg glass or metal, firstly clean the surface with Methylated Spirits. If there is old difficult to remove residue such as old paint, we recommend using paint stripper such as Selleys Kwik Strip Smart. -Ensure the surface is dry before applying the product.
Safety tips:
-Avoid contact with the skin and eyes.
-Avoid breathing vapour.
-Do not use solvents near eyes or open wounds.
-In case of contact with eyes, flush with water for at least 15 minutes and seek medical attention
-Non-toxic when set.
-For further information refer to the Material Safety Data Sheet (MSDS).
-Storage and re-use
-Ensure caps are replaced and product stored in a cool dry place.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
A two part epoxy adhesive that bonds with maximum strength. Mixed product gels in 2 hours. Initial bonding is achieved in 6-8 hours with maximum bond strength strength after 3 days.
Features
Araldite is stronger than other glues due to the chemical reaction of the two parts
Bonds a variety of surfaces
Dries Clear
Very Strong, durable bonding
Very high water resistance (e.g. OK for fixing tiles around pool, but not below the water line. For this use Selleys Knead it Aqua)
Forms a rigid, durable bond
Can be used for gap filling (surfaces need not mate closely)
Good chemical resistance
Heat Resistant
Clamping is recommended to achieve a stronger bond
Not suitable for bonding plastics such as Polypropylene and Polyethylene
Bond strength weakens above 80°C but strength is regained when temperature drops
Where can this product be used?
Load bearing repairs
Gluing the head back on your hammer
Fixing loose table or chair legs.
Bonding solid pieces of Aluminium sheeting
Bonding timber on your boat
Repairing splits and cracks in Cricket bats
Bonding fibreglass sheets
Repairing Ski’s
Fixing Dynabolts and metal rods into concrete
What materials is this product suitable for?
Glass
Metal
Wood
Fabric
Rigid Plastic – will not bond to Polyethylene or Polypropylene plastics
Crystal
Leather
How to use this product
Before applying the Araldite mixture, all surfaces MUST be thoroughly clean and dry.
All traces of grease, rust paint, etc. should be removed.
For best results smooth surfaces should be roughened by mechanical abrasion after solvent cleaning.
Onto a clean, disposable surface (e.g. polyethylene or cardboard), dispense equal volumes of Part A and Part B. Thoroughly mix together with a spatula, nail or stick. When using the tubes it is essential to use the correct mixing ratio, i.e. 1 part each
Apply adhesive immediately to both surfaces and press together. Clamping is necessary while bond sets over 6-8 hours. Scrape off excess adhesive and wipe mixing utensils immediately.
When using tubes, Ensure correct caps are replaced on each tube or they will harden
Handy tips
For maximum working time, mix in small quantities. Large quantities accelerate the curing process and reduce working time.
To extend product life replace caps immediately after use. Ensure you wipe excess from nozzle with a tissue dipped in acetone (or nail polish remover) before replacing cap.
When using the tube variant, ensure you replace the correct cap on the correct tube. Placing the wrong cap on the wrong tube will cause the tube to harden. (lids and tubes are colour coded to help)
Wipe off any uncured araldite with acetone or nail polish remover.
To remove product after cure, mechanical action (scraping or sanding) is recommended. Since the product is chemically resistant solvent will NOT dissolve this product.
To reposition the bond once cured, check that the item is heat resistant. If safe, heat the item slowly, e.g. in an oven, to at least 150oC. The product will soften and liquify slightly. Scrape off any excess then reposition the joint carefully using appropriate safety equipment. Allow the item to cool down in the correct position. The product will reharden once returned to room temperature.
Clamping recommended for a stronger bond.
For cleaning surfaces prior to application of adhesive, if the surface is porous, we would reccomend using Selleys Liquid Sugar Soap. If the surfact is non-porous eg glass or metal, firstly clean the surface with Methylated Spirits. If there is old difficult to remove residue such as oold paint, we recommend using paint stripper such as Selleys Kwik Strip Smart. Ensure the surface is dry before applying the product.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
A strong and durable, fast setting two part epoxy adhesive that dries crystal clear making it ideal for areas where an invisible bond is required. Mixed product gels in 5 minutes. Initial bonding is achieved in 20 minutes with maximum bond strength after 16 hours. Weather and yellowing resistant. Shock resistant.
Features:
-Araldite is stronger than other glues due to the chemical reaction of the two parts.
-Bonds a variety of surfaces
-Dries Crystal Clear so there’s no visible evidence of repair
-Quick setting in 5 minutes
-No clamping necessary
-High water resistance
-Forms a rigid, durable bond
-Can be used for gap filling (Surfaces need not mate closely)
-Good chemical resistance
-Heat Resistant
-Doesn’t yellow over time so is ideal for use on glassware
Appearance:
Crystal Clear
Where can this product be used?
-Fixing a broken glass vase
-Repairing jewellery
-Toy repairs
-Fixing ornaments or crockery
-Fixing your handbag strap
-Not suitable for bonding plastics such as Polypropylene and Polyethylene or for use on polystyrene
What materials is this product suitable for?
-Glass
-Metal
-Wood
-Fabric
-Rigid Plastic
-Crystal
-Leather
How to use this product:
-Before applying the Araldite mixture, all surfaces MUST be thoroughly clean and dry.
-All traces of grease, rust paint, etc. should be removed.
-For best results, smooth surfaces should be roughened by mechanical abrasion after solvent cleaning.
-Onto a clean, disposable surface (e.g. polyethylene or cardboard), dispense equal volumes of Part A and Part B. Thoroughly mix together with a spatula, nail or stick. When using the tubes it is essential to use the correct mixing ratio, i.e. 1 part each
-Apply adhesive immediately to both surfaces and press together. Clamping is not necessary, but allow the bond to remain undisturbed for at least 20 minutes. Scrape off excess adhesive and wipe mixing utensils immediately.
-When using tube kit, ensure correct caps are replaced on each tube or they will adhere.
Handy tips:
-A useful solvent to clean up epoxy and polyester resins BEFORE they are cured can be prepared by mixing 2 parts toluene with 1 part alcohol (eg methylated spirits or denatured alcohol).
-Clamping is recommended for a stronger bond.
-For a maximum working time, mix in small quantities. Large quantities accelerate the curing process and reduce working time.
-To extend product life replace caps immediately after use.
-When using the tube variant, ensure you replace the correct cap on the correct tube. Placing the wrong cap on the wrong tube will cause the tube to harden. (lids and tubes are colour coded to help)
-Wipe off any uncured Araldite with acetone or nail polish remover.
-To remove product after cure, mechanical action (scraping or sanding) is recommended. Since the product is chemically resistant solvent will NOT dissolve this product.
-To reposition the bond once cured, check that the item is heat resistant. If safe, heat the item slowly, e.g. in an oven, to at least 150oC. The product will soften and liquify slightly. -Scrape off any excess then reposition the joint carefully using appropriate safety equipment. Allow the item to cool down in the correct position. The product will reharden once returned to room temperature.
-Keep a box of Selleys Sugar Soap Wipes around for quick & effective cleanup
-For cleaning surfaces prior to application of adhesive, if the surface is porous, we would recommend using Selleys Liquid Sugar Soap. If the surface is non-porous eg glass or metal, firstly clean the surface with Methylated Spirits. If there is old difficult to remove residue such as old paint, we recommend using paint stripper such as Selleys Kwik Strip Smart.
Safety tips:
-Avoid contact with the skin and eyes.
-Avoid breathing vapour.
-Do not use solvents near eyes or open wounds.
-In case of contact with eyes, flush with water for at least 15 minutes and seek medical attention.
-Non-toxic when set.
Storage and re-use:
Ensure caps or lids are replaced and product stored in a cool dry place.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Product Overview:
Bastion Multipurpose Primer is a professional-grade waterproofing primer designed for wet areas and tiled surfaces. It enhances adhesion for waterproofing membranes, adhesives, and coatings, making it ideal for use in bathrooms, kitchens, balconies, and other areas exposed to moisture. It is compatible with most construction adhesives and offers rapid drying for faster project completion.
Features & Benefits:
✔️ Multipurpose Use – Suitable for internal & external applications on walls and floors
✔️ Enhances Adhesion – Ensures strong bonding for tiles and waterproof membranes
✔️ Rapid Drying – Reduces wait times and speeds up installation
✔️ Low VOC Formula – Environmentally friendly with minimal odour
✔️ High Coverage – Approx. 5m² per litre for cost-effective application
Surface Preparation:
Ensure surfaces are clean, dry, and free from dust, grease, and other contaminants.
Remove loose particles and repair any cracks before application.
Porous surfaces may require multiple coats for optimal adhesion.
Application Instructions:
Shake well before use.
Apply using a brush, roller, or spray for even coverage.
Allow to dry for approximately 30 minutes before applying waterproofing membranes or adhesives.
For highly absorbent surfaces, apply a second coat after the first has dried.
Coverage:
1L covers approx. 5m² (depending on surface porosity and application method).
Drying Time:
Touch dry: 15-30 minutes
Ready for membrane or adhesive application: 30-60 minutes
Clean-Up:
Clean tools immediately with warm, soapy water before the primer dries.
Dispose of residue according to local waste disposal regulations.
Technical Data:
Type: Acrylic-based primer
Colour: Milky white (dries clear)
VOC Content: Low
Application Temperature: +10°C to +35°C
Storage: Store in a cool, dry place away from direct sunlight
Safety Warnings:
Avoid contact with skin and eyes; wear protective gloves and eyewear.
Use in a well-ventilated area to prevent inhalation of fumes.
Keep out of reach of children.
Refer to the Safety Data Sheet (SDS) for detailed handling information.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Bear masking tape is made from quality crepe paper with a natural rubber adhesive to provide instant attachment to a wide variety of surfaces. With excellent holding power, this general purpose masking tape is ideal for wrapping, bundling and sealing and removes cleanly within 24 hours of application.
Resists lifting and curling
Easy to tear by hand
All purpose applications
Removes clean within 24 hours
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Betta TileCare Tile & Grout Cleaner is a powerful, ready-to-use solution designed to effectively remove ingrained dirt, grease, grime, and oil deposits from tiled surfaces without causing damage. Its fast-acting, biodegradable, and non-caustic formula makes it both user-friendly and environmentally responsible.
Surface Preparation:
Ensure the surface is free from dust and loose materials before cleaning.
Application Instructions:
Spray Betta TileCare Tile & Grout Cleaner directly onto the affected area.
Vigorously scrub the area with a stiff brush to lift dirt and grime.
For heavily soiled surfaces, repeat the application as necessary until the stain is removed.
Coverage:
Approximately 3 to 4 square meters per liter.
Drying Time:
Allow the cleaned area to dry completely before use.
Cleanup:
After scrubbing, leave the solution on the surface for 5 to 10 minutes, then rinse thoroughly with water. Do not allow the cleaner to fully dry before rinsing.
Technical Data:
Appearance: Clear liquid
pH Level: Neutral
Solubility: Fully water-soluble
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Betta Tile Care Tile & Grout Sealer
Betta Tilecare Tile & Grout Sealer waterproofs porous tiles and grout without leaving a slippery film coating.
Drying Time:
Recoat: 15 minutes
Full Dry: 24 hours
Coverage:
1L covers 5-10m²
Finishes:
White in the pail, dries clear
Ideal For:
New & old grout (clean)
Unsealed and/or porous tiles
Application Method & Cleanup:
Tools: Paint brush, roller, pump spray
Features:
Water-based
Clear penetrating finish
Invisible moisture-repellent
Easy to use
Proven technology
Non-slip
Preparation:
Remove silicone sealant strips and soap build-up.
Clean mould off tiles and grout using Betta Tilecare Mould Rid™ or bleach.
Rinse thoroughly with water after cleaning.
Patch any loose or missing tile grout. For improved results, use Bondall HydroCrete as a grout additive.
Ensure the application area is dry for 12-24 hours before applying Tile & Grout Sealer.
For porous surfaces or after high-pressure washing, allow 3-4 days drying time before applying the sealer.
Application:
Start at the top of the wall and brush Tile & Grout Sealer liberally over the tiles and grout.
Finish with the shower base or floor, ensuring thorough application to all surfaces.
Drying:
Allow 15 minutes for the first application to react, then reapply over the entire area.
After the second application, wait 15 minutes for penetration, then wipe off any excess with a dry cloth.
Allow 24 hours for full drying before use.
Betta Tilecare Tile & Grout Sealer is the perfect solution for sealing and protecting both new and old grout, ensuring your surfaces stay waterproof and protected without compromising safety.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Betta TileCare Tile & Grout Sealer with Wheel Applicator is a premium, water-based penetrating sealer that forms an invisible moisture-repellent barrier. Ideal for use in bathrooms, kitchens, laundries, and other wet areas, it helps prevent water damage, stains, and mould growth on porous tiles and grout.
The included wheel applicator makes sealing fast and easy, delivering smooth and precise coverage with minimal mess. Once cured, it dries clear without leaving a slippery or glossy finish, maintaining the natural look of your surfaces.
Surface Preparation
Ensure surfaces are clean, dry, and free of mould, soap scum, and any existing sealers or coatings.
Remove silicone sealants prior to application.
For best results, allow grout and tiles to dry for at least 24 hours before sealing. Heavily porous surfaces may require 3–4 days of drying time.
Application Instructions
Shake well before use.
Starting from the top of the area, apply sealer evenly using the wheel applicator.
Ensure all tile and grout lines are thoroughly coated.
Allow to absorb for 15 minutes.
Reapply a second coat if needed.
Wipe away any excess product from tiles with a clean, dry cloth.
Avoid heavy foot traffic or moisture exposure for at least 24 hours after final coat.
Coverage
Approx. 5–10m² per litre depending on tile and grout porosity.
Drying Time
Touch dry in 15 minutes
Fully cured in 24 hours
Clean-Up
Clean tools and applicator with water immediately after use.
Technical Data
Appearance: Milky white (dries clear)
Base: Water-based penetrating sealer
Finish: Invisible, non-slip
Application method: Wheel applicator
Suitable for: Porous tiles and grout (indoor use)
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Betta Tilecare Tile & Grout Sealer waterproofs porous tiles and grout without leaving a slippery film coating, making it perfect for kitchens, bathrooms, and other tiled areas.
Drying Time:
Recoat: 15 minutes
Full Dry: 24 hours
Coverage:
1L covers 5-10m²
Available Sizes:
1L, 4L, 300g Aerosol, 500ml Wheel Applicator, 750ml Trigger
Application Method & Cleanup:
Tools: Paint brush, roller, or pump spray
Features:
Water-based formula
Clear penetrating finish
Invisible, moisture-repellent coating
Easy to use
Proven technology
Non-slip finish
Preparation:
Remove any silicone sealant strips and soap build-up.
Clean mould off tiles and grout using Betta Tilecare Mould Rid™ or bleach.
Rinse thoroughly with water after cleaning.
Remove and patch all loose or missing tile grout. For improved results, add Bondall HydroCrete to the grout mix.
Ensure the application area is dry for 12-24 hours before applying the sealer.
For porous surfaces or after high-pressure washing, allow 3-4 days drying time before sealing.
Application:
Start from the top of the wall, applying Tile & Grout Sealer liberally over tiles and grout.
Finish by applying the sealer to the shower base or floor. Ensure even coverage across all surfaces.
Drying:
Wait at least 15 minutes for the first application to react before reapplying.
After the second application, wait another 15 minutes, then use a dry cloth to remove any excess from the tile surface.
Allow 24 hours before using the sealed area.
Tips & FAQs:
Not for Water Holding Vessels: This product is not intended for waterproofing items like ponds or fish tanks.
Test Before Use: Always test on a small, inconspicuous area to ensure it provides the desired result.
Avoid Over-application: If the sealer runs or pools, wipe down with a clean, dry, low-lint cloth.
Apply Evenly: Take care to apply evenly, especially on pitted surfaces.
Pre-treat Stains & Mould: Ensure stains, moss, and mould are treated prior to sealing.
Avoid Pooling: Do not allow the product to pool or over-apply on surfaces.
Betta Tilecare Tile & Grout Sealer is a reliable and easy-to-use product for waterproofing and protecting your tiles and grout, providing long-lasting protection without altering the natural appearance of your surfaces.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Betta Tilecare Wet Area Waterproofer is a flexible, fast-drying, liquid rubber membrane designed for waterproofing internal wet areas such as bathrooms, showers, laundries, and tiled spaces. It provides a durable, seamless moisture barrier that resists water pressure and prevents leaks when applied beneath tiles, screeds, or surface coatings.
Surface Preparation:
All surfaces must be clean, dry, and structurally sound. Remove dust, oil, grease, wax, and loose or flaking material. Smooth, glossy surfaces should be roughened or etched. Rough or uneven surfaces should be patched and leveled. Mechanically remove any surface contamination or de-bonded coatings for optimal adhesion.
Priming (if required):
Use a compatible primer on highly porous, glossy, or damp surfaces to promote adhesion. Ensure primed surfaces are dry before applying the membrane.
Application Instructions:
Apply a bond breaker system such as joint tape or fabric to corners, joints, and penetrations.
Apply the first coat using a brush or roller, working it into the surface to avoid pinholes.
Allow the first coat to dry (approx. 1 hour), then apply the second coat in the opposite direction.
Total coverage should be at least 1.5L/m², forming a final dried film thickness of approximately 1.2mm.
Coverage should extend up walls at least 150mm in general areas and 1800mm in shower recesses.
Allow the membrane to cure fully before tiling or overcoating.
Coverage:
Approximately 1.5L per square metre for two coats, depending on surface porosity.
Drying Time:
Tack-free: 45 minutes
Recoat: 1 hour
Ready for tiling: 4 hours
Flood test ready: 16 hours
Dry times may vary based on temperature and humidity.
Clean Up:
Clean tools and equipment with water immediately after use.
Technical Data:
Base: Water-based liquid rubber
Colour: Grey
Finish: Flexible, seamless membrane
Dried Film Thickness: Approx. 1.2mm (after two coats)
Application Temp: 5°C to 35°C
Shelf Life: Refer to packaging for details
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Swing the Bondall Silicone Remover Push Pull Scrape around corner edges to remove silicone joints. Easily access hard to get to glues with this product that is made out of durable, sharper material than other scrape products so it’s built for any project.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Multipurpose Adhesive
Bostik Blu-Tack® is a permanently plastic reusable material that can used as a removable adhesive or to model with. It has excellent moulding qualities as it resists slump, will not shrink, dry out or harden and can be used over and over again.
Recommended Uses
Ideal for a thousand and one uses including:
Create 3D models
Create fantastic murals on your window or wall
Hold up posters
Cards
Children's paintings
Certificates
Party decorations
Maps
Messages
Hold telephones, mouse mats and calculators in place
Hold ornaments to shelves, photos in albums, screws to screwdrivers
Holds model parts in position for painting or glueing and picture frames straight
Safely store pins, keys, screws and other small objects
Use in floral arrangements to keep flowers in place
Clean fluff from fabric and dirt from computers, model railway tracks or remove dust from hard to get at places
Use as a putty to block out breezes
Materials
Designed to stick to:
Non-porous surfaces
Vinyl
Coated wallpaper
Painted surfaces
Glass
Metal
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Clear Flexible Fabric Glue
A versatile, water-based fabric adhesive designed for clothing repairs, craft projects, and soft furnishings. It forms a strong, long-lasting, flexible bond on most porous fabrics and dries clear in thin films for a neat, professional finish. Once fully cured, the bond is machine washable, can be tumble dried, and is safe to iron.
Key Features
Permanent, flexible bond for clothing and crafts
Water-based, low odour formula
Dries clear in thin applications
Machine washable and tumble-dry compatible after full cure
Heat resistant—safe to iron over the bonded area
Easy squeeze application; cleans up with warm soapy water while wet
Ideal Uses
Hems, trouser turn-ups, and pocket repairs
Attaching cloth labels, badges, and patches
Securing frayed lace ends and trims
Curtain hems and decorative soft furnishing accents
General fabric repairs on cotton, denim, linen, felt, leather and similar porous textiles
Directions
Preparation: Ensure surfaces are clean, dry, and free from dust or grease. At least one surface must be porous.
Test first: Trial on an off-cut or hidden area, especially with light or open-weave fabrics.
Apply: Spread a thin, even layer to the non-visible side or back of the fabric. Join parts and press for several seconds.
Initial handling: Light handling is typically possible after about 1 minute; avoid stressing the bond.
Optional set boost: For improved bonding, gently iron-press ~5 minutes after gluing (use a pressing cloth).
Full cure: Reaches full effective strength after 24 hours. After curing, the item may be machine washed, tumble dried, and ironed.
Clean-Up
While wet: Wipe away with warm, soapy water; repeat if needed, rinse and dry.
When dry on smooth, non-porous surfaces: Gently rub off or use warm, soapy water.
When dry on fabrics: Difficult to remove—prevent excess and work carefully.
Compatibility & Notes
Best on porous textiles: cotton, denim, linen, felt, leather, and similar materials.
Not suitable for non-porous materials or 100% nylon/polyester fabrics.
Avoid heavy application or excessive pressure on light or open-weave fabrics to minimise show-through or darkening.
Specifications
Chemistry
Acrylic copolymer (water-based)
Appearance
Milky white liquid; dries clear in thin films
Density
1.07 ± 0.02 g/cm³
Solids Content
61–63%
Viscosity
Up to ~1,000 cps
pH
4–6
Initial Handling Time
~1 minute (varies with material, temperature, humidity)
Full Cure / Maximum Strength
~24 hours
Washability & Heat
Machine washable; tumble dry and iron once fully cured
Clean-Up (Wet)
Warm soapy water
Pack Size
20 mL (blister)
Storage
Cool, dry place around 20 °C; keep container tightly closed; protect from moisture
Shelf Life
Up to 18 months from manufacturing date (unopened, stored as directed)
Not Suitable For
100% nylon, 100% polyester, non-porous materials, very fine/delicate fabrics (e.g., some silks, wools, linens)
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Overview
This high-quality general-purpose silicone sealant is a versatile solution for a wide range of sealing and bonding applications. Engineered with neutral cure technology, it is designed to provide a durable, flexible, and weather-resistant seal that remains reliable even in demanding environments. Once cured, the sealant forms a strong rubber-like finish that is permanently elastic, ensuring long-lasting performance both indoors and outdoors.
Key Features
Neutral Cure Technology: Low-odor curing system suitable for sensitive applications.
Permanently Flexible: Retains elasticity over time without cracking or shrinking.
Waterproof Protection: Provides a watertight seal, protecting against leaks and moisture ingress.
Interior & Exterior Use: Unaffected by rain, snow, extreme temperatures, or prolonged UV exposure.
Excellent Adhesion: Bonds strongly to most common building materials without primer.
Easy Application: Smooth flow from the tube, easy to tool and clean before curing.
Applications
This sealant is designed for general-purpose use across a variety of materials and environments. Its flexibility and adhesion make it suitable for:
Sealing around window and door frames.
Lap joints in metal guttering and roofing sheets.
Bonding panels such as wood, plasterboard, insulation board, and drywall.
Fixing masonry joints including sills, brickwork, and decorative trims.
Gap filling around pipes, conduits, and penetration surfaces.
General sealing in kitchens, bathrooms, and living areas where flexibility is required.
Limitations
Not suitable for permanent water immersion (e.g., underwater joints or continuous water load).
Not recommended for use on polyethylene (PE), polypropylene (PP), polycarbonate (PC), polymethyl methacrylate (PMMA), PTFE, neoprene, bituminous surfaces, or very soft plastics.
Not intended for deep cavity filling without adequate moisture for curing.
Surface Preparation
To ensure maximum performance, surfaces must be clean, dry, and free from dust, grease, or loose particles. Non-porous surfaces should be wiped with solvent and dried with a clean cloth. Porous surfaces should be lightly abraded or brushed to remove contaminants and improve adhesion. Complete any painting work before applying the sealant.
Application Instructions
Remove the cap and pierce the nozzle seal.
Apply steadily along the joint or surface, ensuring continuous contact.
Smooth or tool the bead before skin formation occurs.
If masking tape is used, remove immediately after tooling to avoid tearing the cured seal.
Curing
At room temperature (23°C), the sealant will skin over within 15 minutes and achieve full cure within 24 hours, depending on humidity and joint depth. Once cured, it provides a permanently flexible and weatherproof joint.
Cleaning & Maintenance
Excess uncured sealant can be cleaned using a cloth dampened with mineral turpentine. Fully cured material should be trimmed away carefully with a sharp blade. Store unused tubes in a cool, dry place below 25°C and away from direct sunlight. Shelf life is up to 12 months from the date of manufacture.
Health & Safety
Use in a well-ventilated area. Avoid contact with eyes and mucous membranes, as uncured sealant may cause irritation. In case of contact with eyes, flush thoroughly with water and seek medical advice. Keep out of reach of children. Always follow safety instructions and refer to the product’s safety data for detailed guidance.
Why Choose This General Purpose Silicone Sealant?
This sealant is a trusted choice for tradespeople, DIY enthusiasts, and homeowners seeking a reliable solution for everyday sealing needs. Its combination of flexibility, adhesion, and weather resistance ensures that once applied, it continues to protect and bond effectively for years to come. Whether you are fixing a leaking gutter, sealing around windows, or bonding decorative trims, this product provides professional results with minimal effort.
Technical Specifications
Technology
Neutral Cure Silicone
Appearance
Clear Paste
Working Time
Up to 15 minutes
Tack-Free Time
Approximately 15 minutes
Full Cure at 23°C
24 hours
Flexibility
Permanently elastic after curing
Weather Resistance
Unaffected by rain, snow, UV, and temperature variations
Applications
Windows, doors, guttering, masonry, panels, pipes, decorative elements
Storage
Below 25°C, out of direct sunlight
Shelf Life
12 months from manufacturing date
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Bostik Hot Melt Sticks are made of a general purpose translucent flexible hot melt in a stick form for use with the Bostik Hot Melt Glue Gun. It provides an instant, fast, clean and versatile bond between a myriad of household and craft materials and suitable for many porous materials.
Recommended Uses
Ideal for:
Craft projects
Home décor projects
Minor household repairs
DIY projects
Materials
Designed to stick to:
Most craft and household materials
Fabric
Wood
Leather
Most plastics
Polystyrene
Ceramics
Features
Once heated and gunned out, it provides instant adhesion
Adhesive is clear and flexible when dry
Fast, clean and versatile
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Bostik HG3 Hot Melt Glue Gun is an electric hot melt gun that uses Bostik HG3 Hot Melt Glue Sticks to provide an instant, fast, clean and versatile adhesion to a myriad of household and craft materials. It is rated 110-240 volts, 50/60Hz, 55 watts with a working temperature of 193°C.
Recommended Uses
Ideal for:
Craft projects
Home décor projects
Minor household repairs
DIY projects
Most craft and household materials
Fabric
Wood
Leather
Most plastics
Polystyrene
Ceramics
Key Features:
Easy to use trigger action
Designed to fit neatly in the hand
Designed for use with Bostik HG3 Glue Sticks
Uses:
Bostik HG3 Glue Gun, using Bostik HG3 Glue glue sticks provide an instant fast, clean and versatile adhesion to a myriad of household and craft materials.
- Bostik HG3 Glue Gun is designed for DIY Tasks and household repairs, hobby, craft-work, and home décor projects. Instantly bonds most craft and household materials including, fabric, wood, leather, most plastics, ceramics and metal
Application:
1. Clip metal stand on the glue gun. Always use the stand. Never lie gun down on the side when in use or whilst cooling down this will cause gun failure.
2. Insert Bostik HG3 glue stick gently through the tunnel at the back of the gun. Never use excessive force as the glue stick will clog the channel.
3. Plug the cord into an electrical outlet and wait 5 minutes to heat up the glue. Ensure glue is hot or glue will not extrude through the gun.
4. Apply adhesive by gentle continuous pressure and to the more difficult surface to bond (usually smooth surfaces are more difficult to adhere than rough, porous surfaces).
5. Release trigger to stop the flow of glue.
6. Glue does not need to be spread. Do not touch
7. Molten adhesive, as temperatures around 200°C will cause serious burns.
8. Join surfaces as quickly as possible for optimum bond strength.
9. To bond foam products (polystyrene foam etc) to another surface, apply adhesive in an “S” pattern to the surface to which the foam will be bonded, rather than directly to the foam.
10. To bond fabrics, use a smaller “S” pattern for additional strength.
11. Small drops of glue can be easily removed when cold.
12. Residual glue can be remelted and removed from most bonded surfaces with a warm knife.
13. When you have finished using the gun, switch off and unplug it.
14. Allow the glue stick to remain in the gun – do not remove the stick from the rear of the gun at any time
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Bostik Nail It Fast Cure White: The Acrylic Adhesive for Rapid, Strong & Odorless Bonds
Product Overview
Bostik Nail It Fast Cure is a fast-curing, versatile acrylic adhesive that offers strong and durable bonds. It's easy to apply and almost odorless.
Key Benefits
Solvent-free formula
Suitable for EPS and XPS
Non-corrosive towards metal
Easy to apply and clean
Applications
Specifically developed for bonding:
Wood, chipboard, hardboard
uPVC to brickwork, stone or concrete
Ceramic tiles to porous substrates
Limitations
Not suitable for PE, PP, PC, PMMA, PTFE, soft plastics, neoprene, and bituminous substrates. Not designed for continuous exposure to water or for movement joints.
Application Instructions
Apply the adhesive in a ventilating manner, using vertical stripes or dots. Material should be placed by shoving and pushing firmly.
Surface Preparation
All substrates must be solid, clean, dry, and free from grease and dust. For porous substrates, priming may be required.
Cleaning & Maintenance
Tools and uncured material can be cleaned with water or Methylated Spirit. Cured material must be removed mechanically. Bostik HANDY WIPES are recommended for cleaning hands.
Colour Options
Available in white.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Bostik Nail It Instant Grab White: Grab It Fast, Hold It Forever
Product Overview
Bostik Nail It Instant Grab White is a high-quality professional adhesive crafted with MSP (Modified-Silyl Polymer) technology. It offers extremely high initial tack, eliminating the need for fixation or support during curing.
Smart Advantages
Extremely high initial tack
No fixation or support needed during curing
Free of isocyanates, phthalates, solvents, and silicones
Suitable for both interior and exterior use
Non-corrosive towards metals
Almost odorless
Resistant to moisture, weather, and UV
Applications
Universal bonding adhesive suitable for:
Stone, Concrete, Glass
Metals, Alloys, Stainless steel
Plastics, Polyurethane, PVC
Wood, Paint Systems
Directions for Use
Application should be done in vertical stripes using a caulking gun. No need for fixation or support due to high initial strength.
Limitations
Not suitable for certain plastics, continuous water exposure, or movement joints.
Cleaning & Safety
Remove excess uncured adhesive with Bostik Handy Wipe or a damp cloth. Cured adhesive can only be mechanically removed.
Product Codes & Specifications
Available in 290ml cartridges. Temperature resistance ranges from -40°C to +90°C.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Bostik Seal it Kitchen & Bathroom Light Grey: The All-In-One Solution for Wet Areas
Product Overview
A premium oxime-curing silicone sealant specifically formulated to resist mildew and mold in hot, humid environments.
Key Features
Neutral cure for versatile application
Excellent for UV exposure and porous surfaces
Resistant to mold and mildew
±25% joint movement capabilities
WaterMark approved for quality assurance
Low odour and UV resistant
Safe on various materials including galvanized steel and concrete
Where to Use
This product is ideal for sealing in:
Kitchens, bathrooms, toilets, and showers
Basins and vanity units
Glass partitions
Ceramic tiles
Vitreous enamel
Most laminated surfaces
Fibre glass
Rimless sinks
Instructions
Apply on clean, dry surfaces for optimal results. Follow safety guidelines as stated on the product label.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Bostik Seal it Kitchen & Bathroom Translucent: The All-In-One Solution for Wet Areas
Product Overview
A premium oxime-curing silicone sealant specifically formulated to resist mildew and mold in hot, humid environments.
Key Features
Neutral cure for versatile application
Excellent for UV exposure and porous surfaces
Resistant to mold and mildew
±25% joint movement capabilities
WaterMark approved for quality assurance
Low odour and UV resistant
Safe on various materials including galvanized steel and concrete
Where to Use
This product is ideal for sealing in:
Kitchens, bathrooms, toilets, and showers
Basins and vanity units
Glass partitions
Ceramic tiles
Vitreous enamel
Most laminated surfaces
Fibre glass
Rimless sinks
Instructions
Apply on clean, dry surfaces for optimal results. Follow safety guidelines as stated on the product label.
![3M Claw Drywall Picture Hanger 15lbs 7Kg [Pack x 1]](//gluesaustralia.com.au/cdn/shop/files/638060661543_46481795-b414-41bc-a9c1-dc9b380c967f.jpg?v=1754712835&width=645)
![3M Claw Drywall Picture Hanger 15lbs 7Kg [Pack x 5]](//gluesaustralia.com.au/cdn/shop/files/638060661550_1fe37b78-c060-4f27-8387-63c1e448c0e6.jpg?v=1754712834&width=645)
![3M Claw Drywall Picture Hanger 25lbs 11Kg [Pack x 1]](//gluesaustralia.com.au/cdn/shop/files/638060661567_47226083-6c1f-44e5-9a7f-4238c8ab3fcf.jpg?v=1754712832&width=645)
![3M Claw Drywall Picture Hanger 25lbs 11Kg [Pack x 4]](//gluesaustralia.com.au/cdn/shop/files/638060661574_fb2086bb-b8e6-4490-8e91-ea0a14fda213.jpg?v=1754712831&width=645)
![3M Claw Drywall Picture Hanger 45lbs 20Kg [Pack x 1]](//gluesaustralia.com.au/cdn/shop/files/638060661581_a0340f7e-ce42-40cb-b71a-cd5b0abb2b66.png?v=1754712829&width=645)
![3M Claw Drywall Picture Hanger 45lbs 20Kg [Pack x 3]](//gluesaustralia.com.au/cdn/shop/files/638060661598_a9209f0c-7031-48ec-be4f-9fb1e87b6730.jpg?v=1754712828&width=645)
![3M Claw Drywall Picture Hanger 65lbs 30Kg [Pack x 2]](//gluesaustralia.com.au/cdn/shop/files/638060921234_e9940663-65b0-41b5-a196-e209139e4251.jpg?v=1754712826&width=645)
![3M Claw Drywall Picture Hanger 15lbs 7Kg [Pack x 1]](http://gluesaustralia.com.au/cdn/shop/files/638060661543_46481795-b414-41bc-a9c1-dc9b380c967f.jpg?v=1754712835&width=645)
![3M Claw Drywall Picture Hanger 15lbs 7Kg [Pack x 5]](http://gluesaustralia.com.au/cdn/shop/files/638060661550_1fe37b78-c060-4f27-8387-63c1e448c0e6.jpg?v=1754712834&width=645)
![3M Claw Drywall Picture Hanger 25lbs 11Kg [Pack x 1]](http://gluesaustralia.com.au/cdn/shop/files/638060661567_47226083-6c1f-44e5-9a7f-4238c8ab3fcf.jpg?v=1754712832&width=645)
![3M Claw Drywall Picture Hanger 25lbs 11Kg [Pack x 4]](http://gluesaustralia.com.au/cdn/shop/files/638060661574_fb2086bb-b8e6-4490-8e91-ea0a14fda213.jpg?v=1754712831&width=645)
![3M Claw Drywall Picture Hanger 45lbs 20Kg [Pack x 1]](http://gluesaustralia.com.au/cdn/shop/files/638060661581_a0340f7e-ce42-40cb-b71a-cd5b0abb2b66.png?v=1754712829&width=645)
![3M Claw Drywall Picture Hanger 45lbs 20Kg [Pack x 3]](http://gluesaustralia.com.au/cdn/shop/files/638060661598_a9209f0c-7031-48ec-be4f-9fb1e87b6730.jpg?v=1754712828&width=645)
![3M Claw Drywall Picture Hanger 65lbs 30Kg [Pack x 2]](http://gluesaustralia.com.au/cdn/shop/files/638060921234_e9940663-65b0-41b5-a196-e209139e4251.jpg?v=1754712826&width=645)
