In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Selleys 650FC: The Ultimate Adhesive Sealant Powered by Advanced Hybrid Technology
Key Features
+/- 20% Joint movement capability
Excellent UV & Weather Resistance
Superior Strength & Instant Grab
Can be applied on damp surfaces
Applications
This product can be used in various applications such as trafficable joints, air conditioning ducting, caravan construction, perimeter seals around doors, windows, and general interior joint sealing.
Compatibility
Highly compatible with most building materials including timber, concrete, metals, and more. Not suitable for PVC, polyethylene, and temperatures above 80°C.
How to Use
Ensure surfaces are clean and dry. Apply using a sealant gun and spread evenly within 10 minutes.
Storage and Cleanup
Store in cool, dry conditions below 30°C. Uncured product can be removed with mineral turps.
Precautions
This product is not suitable for constantly submerged joints or temperatures beyond 80°C.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Selleys 655 FC Crystal Clear Flexible Adhesive and Sealant 290 mL
Premium 100 percent crystal clear hybrid adhesive and sealant that delivers superior strength, instant grab, and long lasting flexibility. Bonds and seals on most common building materials, works indoors and outdoors, and can be applied to wet or damp surfaces. Low VOC, non yellowing, paintable, and non slumping for neat vertical and overhead joints up to 20 mm.
Why you will love it
Superior strength with instant grab
Primerless adhesion on most surfaces
Applies to wet or damp substrates
Fast curing with non slumping finish
Crystal clear appearance that stays clear
Low VOC and isocyanate free
Paintable with water based paints
Suitable for interior and exterior use
Where it works
Ideal for sealing, bonding, and filling on concrete, timber, metals, cement sheeting, brick, plaster, ceramic tiles, fiberglass, and most plastics. Not recommended for polyethylene, polypropylene, or PTFE.
Typical applications
Clear sealing of kitchen and laundry splashbacks
Bonding trims, panels, and skirtings
Sealing gaps in windows, door frames, and cladding
General construction and maintenance sealing where a clear finish is desired
How to use
Prepare the surface so it is clean and free from dust, grease, and loose material.
Cut cartridge tip, attach nozzle, and load into a caulking gun. Cut nozzle to the required bead size.
Apply a continuous bead, pressing firmly so the product contacts both sides of the joint. Tool with a soapy solution before skinning.
For neat edges, mask before applying and remove tape before skin forms.
Clean up
Uncured product cleans off with mineral turps.
Once cured, remove by scraping or sanding. A dedicated silicone and adhesive remover can assist.
Good to know
Do not paint with solvent based paints. If painting, first coat with a water based paint.
Not suitable for permanent water immersion or below water line use.
Store below 30°C. Use within 6 months after opening for best results.
Specifications
Technology
Moisture curing silyl modified polymer
Colour
Clear
Pack size
290 mL cartridge
Density
Approx. 1.06 g/mL
Application temperature
5 to 35°C
Tooling time at 23°C and 50 percent RH
About 25 minutes
Skin time at 23°C and 50 percent RH
About 45 to 55 minutes
Cure rate at 23°C and 50 percent RH
Approx. 3 mm per 24 hours
Slump
0 mm
Tensile strength
About 1 MPa
Shore A hardness
30 ± 5
Elongation at break
Approx. 130 percent
Modulus at 100 percent elongation
About 1.0 MPa
Service temperature
0 to 70°C
VOC content
Approx. 35 g/L
Safety
Follow good ventilation and hygiene practices. Refer to the product safety data sheet for detailed advice.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Selleys All Clear Crystal: The Ultimate Multipurpose Sealant
Key Features
Works on wet, oily, and dirty surfaces
Crystal clear finish
Paintable
Mould and mildew resistant
Water-resistant
Strong adhesion
Best For
Metal, Timber, Glass, Glazed tiles, Brick, Stone, and many plastics (may damage polystyrene and polycarbonate).
Applications
Sky lights
Window frames and glazing
Roof and gutters
Sealing metal or PVC guttering and down pipes
Air conditioners' entries
Shower screens
Sinks and basins
Caravans and recreational vehicles
How to Use
Use only in a well-ventilated area. Ensure surface is clean and dry. Apply with a caulking gun and smooth with a tool dipped in turps.
Limitations
May damage some plastics
Not for permanent water immersion
Not suitable for use over silicones or polystyrene foam
Clean Up
Uncured product may be removed with mineral turps. Cured product can be removed by cutting and scraping.
Technology & Cure Time
Solvent-based, with a full cure time of 48-72 hours. For both interior and exterior use.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Selleys All Clear
Selleys All Clear is a multi-purpose sealant that provides long-lasting protection. All Clear is the solution to water leakage and seepage around the home.
Best for:
Metal, Timber, Glass, Glazed tiles, Brick, Stone, Many plastics (may damage polystyrene and polycarbonate)
Features
Works on wet, oily, and dirty surfaces*
Crystal clear finish
Paintable
Mould and mildew resistant
Water-resistant
Strong adhesion
Where can this product be used?
Sky lights
Windows frames and glazing
Roof and gutters
Sealing metal or PVC guttering and down pipes
Air conditioners' enteries
Shower screens
Sinks and basins
Sealing leaks in caravans and recreation vehicles
What materials is this product suitable for?
Metal
Timber
Glass
Glazed tiles
Brick
Stone
Many plastics (may damage polystyrene and polycarbonate)
Application & Safety
Use only in a well-ventilated area. Avoid contact with skin and eyes and breathing vapours.
How to Apply
The surface must be free from dust, loose particles, and soap residue. If required, clean with turps. Porous surfaces must be dry.
Cut cartridge, fit nozzle, and cut to size. Insert the cartridge into a caulking gun such as SELLEYS LIGHT SPEED Caulking gun.
Apply with a caulking gun, forcing product into the gap. Press into cracks or surface by pushing sealant ahead of nozzle.
Smooth sealant surface immediately with tool dipped in turps.
Limitations
May damage some plastics e.g. polystyrene and polycarbonate.
Not for permanent water immersion e.g fish tanks
Not suitable for use over silicones
Not suitable for polystyrene foam
Additional Information
*Wet Surfaces: Can be applied to clean, wet non-porous surfaces e.g. metals, glass, glazed tiles – not wet porous surfaces e.g. concrete, timber. Remove as much water as possible, preferably with acetone. Keep nozzle close to surface so sealant contacts surface immediately. Flatten immediately into joints. Adhesion improves on drying.
Skins immediately, maximum toughness achieved over several days.
Paintable immediately with water-based paints. For oil-based paints undercoat first with a water-based paint.
Store in cool dry conditions, below 30°C.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Easy to use, fast setting adhesive system to repair ALL plastics.
Features
-Bonds ALL Plastics, including Polyethylene (PE) and Polypropylene (PP)
-Easy to Apply
-Dries clear for clean, neat results
-Fast Bond: 2-30 seconds
-No clamping necessary
-No mixing required
-self-piercing, clog-free cap on adhesive
-Also bonds plastic to other surfaces: Metal, timber, china, rubber, leather
Where can this product be used?
-For interior projects and repairs
-For fast & easy repair of household items made from plastic
-Repair Toys & Games
-Fix Car accessories
-Repair Kitchen plastics and utensils
-Repair Office items
-Water resistant not waterproof, therefore not suitable for surfaces that will be continually wet
-Best results for Nylon items (e.g. car parts) are achieved without initial priming. Contact Selleys consumer advice if unsure of plastic type.
-Not suitable for use on glass – we recommend Selleys Araldite Ultra Clear.
What materials is this product suitable for?
-ALL Plastics
-Adhering Plastic to
Metals
China
Rubber
Leather
How to use this product
-Ensure the surfaces to be joined are close fitting, clean, dry and free of dust.
-Using the primer pen, liberally coat plastic surface/s that are to be bonded.
-Pierce seal at end of the adhesive tube by attaching nozzle and cap and turning clockwise.
-Remove cap and apply a very small amount of glue to one surface only. Bring surfaces together and apply slight pressure.
-The adhesive will grab within 2-30 seconds, depending on environmental conditions and materials being bonded.
-Allow at least 30 minutes for sufficient bond strength for practical use.
-Wipe tip of the tube, replace the cap and store upright in a dry cool place.
Handy tips
-If using on leather test on an inconspicuous area first as adhesive may cause leather to discolour or harden.
-Not suitable to repair items that will contain hot liquids.
-Best results for nylon items are achieved without Initial priming (e.g car parts). Contact Selleys Consumer Advice if unsure of plastic type.
-Will also bond plastic to non-plastic surfaces (Metals, Timber, China, Rubber, Leather). Do not use primer on non-plastic surfaces.
-After use, wipe excess product from the adhesive nozzle with a tissue dipped in nail polish remover.
-For best performance from this product after opening, store in the refrigerator or in a cool, dry place away from direct sunlight.
-In the event that fingers get stuck together – don’t panic! Slowly twist fingers in opposite direction in the hot soapy water.
-Do not squeeze tube before removing the cap. Handle tube by plastic nozzle neck when opening and closing cap. This prevents pressurizing tube which may force material into cap, preventing a tight seal after use.
Safety tips
-Keep Out of reach of Children
-Avoid contact with skin and eyes and avoid breathing in the vapour.
-Bonds on contact. Should fingers stick together apply a solvent such as acetone (nail polish remover) to contact areas then wash with water.
-Do not use solvents near eyes or open wounds.
-Highly Flammable, keep away from sources of ignition.
-Contents of the pen may cause lung damage if swallowed.
-This product is hazardous according to the criteria of NOHSC and HSNO. For frequent hobby or occupational use, please refer to the Material Safety Data Sheet.
-For Advice, contact a Poisons Information Centre (phone Aust. 131 126, NZ 0800 764 766) or a doctor.
-In case of eye contact immediately flush with water for at least 15 minutes and seek medical attention.
Storage and re-use
-Ensure caps are replaced and store in a cool dry place.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
PVA adhesive specially formulated for interior woodworking repairs and projects. White in colour, dries clear and cleans up easily with water.
Features
No mixing required – Ready to use straight from the pack
Suitable for end grain gluing – won’t stain timber, white in colour, but dries clear.
Non-toxic
Dries Clear
Cleans up with water
Where can this product be used?
School projects and craft
Furniture repairs
Repair a split trim
Fix a broken photo frame
Restoring furniture
Fix a wobbly chair
Gluing cupboard shelves for additional support
Repairing a door frame or window
Fix a wine rack
Re-attach book cover/spine or repair torn bindings
Fix a broken drawer
Wooden toy repairs
Craft projects
Unsuitable for use on coated wallpaper overlaps eg vinyl
Although Aquadhere is reasonably water resistant, it is not recommended for use in water or weather exposed situations or for any job where maximum water resistance is required (for weather exposed and/or wet areas we recommend Aquadhere exterior or Aquadhere Durabond).
Will not take common timber stains
Aquadhere is not recommended for joints that are subjected to constant high stress. Instead, use Selleys 308 High Stress wood glue.
Do not use on projects that you need to be able to sand, as Aquadhere Interior is not sandable.
Will not bond MDF, we recommend using Aquadhere Exterior
What materials is this product suitable for?
End grain gluing
Craftwork
Cloth
Paper
Mosaics
Leather
Other craft materials
How to use this product
Surfaces to be bonded must be close fitting, free from dust, dry and clean from grease.
Shake bottle before use
Apply adhesive liberally to one surface only, position surfaces and press together while still wet. Immediately clamp for 30 minutes for softwoods and 1 hour for hardwoods. Alternatively, low clamping pressures (50lbs/in2) can be used with softwoods; higher pressures are recommended for hardwoods (100 – 150lbs/in2). Do not stress joint for 12 hours.
Wipe off excess adhesive while still wet with a damp cloth. If the wood is to be stained, any residual Aquadhere left on the timber surface may prevent the stain from taking to the wood.
Maximum strength is achieved after 12 hours, but longer in cold, damp conditions, or when used on dense timbers.
Cure slows significantly in humid, cold conditions.
Clean all tools with water before adhesive is allowed to dry. If dry, soak in water until adhesive is soft.
Handy tips
1L covers approx. 8m2
To fill small gaps, Aquadhere can be mixed with sawdust.
Longer clamping times may be required for joints under high stress, or alternatively use Selleys 308 High Stress Wood Glue.
Avoid contaminating Aquadhere with iron and steel, eg nails, etc. Aquadhere contaminated with rust (iron oxide) will stain brown/black in the presence of tannins in many woods.
On very porous surfaces applying a thin layer to each side and allowing to soaking in before applying a second layer to one side only may result in a stronger bond
Cured adhesive can be resoftened by prolonged contact with hot water or steam.
Sanding isn’t an effective way to prepare for gluing, as it often leaves an uneven surface and may clog the timber which can stop the glue from penetrating and impact on your result. A straight router can be used to trim the edge, but be sure to only remove as much as required to obtain a suitable edge for gluing.
If you are gluing over a larger surface, try using a small roller to aid in application.
For cleaning surfaces prior to application of adhesive, if the surface is porous, we would recommend using SELLEYS Liquid Sugar Soap. If the surface is non-porous eg glass or metal, firstly clean the surface with mineral turpentine and then again with methylated spirits. If there is old, difficult to remove residue such as old paint, we recommend using paint stripper such as SELLEYS Kwik Strip Smart. Ensure the surface is dry before applying the product.
Keep a canister of SELLEYS Sugar Soap Wipes nearby for a quick and effective cleanup.
Safety tips
Aquadhere is considered a non-hazardous material.
In case of eye contact, hold eye open and flush with plenty of water for 15 minutes.
Storage and re-use
For maximum shelf life store inside at moderate temperatures. Do not allow to freeze.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
PVA adhesive specially formulated for interior woodworking repairs and projects. White in colour, dries clear and cleans up easily with water.
Features
No mixing required – Ready to use straight from the pack
Suitable for end grain gluing – won’t stain timber, white in colour, but dries clear.
Non-toxic
Dries Clear
Cleans up with water
Where can this product be used?
School projects and craft
Furniture repairs
Repair a split trim
Fix a broken photo frame
Restoring furniture
Fix a wobbly chair
Gluing cupboard shelves for additional support
Repairing a door frame or window
Fix a wine rack
Re-attach book cover/spine or repair torn bindings
Fix a broken drawer
Wooden toy repairs
Craft projects
Unsuitable for use on coated wallpaper overlaps eg vinyl
Although Aquadhere is reasonably water resistant, it is not recommended for use in water or weather exposed situations or for any job where maximum water resistance is required (for weather exposed and/or wet areas we recommend Aquadhere exterior or Aquadhere Durabond).
Will not take common timber stains
Aquadhere is not recommended for joints that are subjected to constant high stress. Instead, use Selleys 308 High Stress wood glue.
Do not use on projects that you need to be able to sand, as Aquadhere Interior is not sandable.
Will not bond MDF, we recommend using Aquadhere Exterior
What materials is this product suitable for?
End grain gluing
Craftwork
Cloth
Paper
Mosaics
Leather
Other craft materials
How to use this product
Surfaces to be bonded must be close fitting, free from dust, dry and clean from grease.
Shake bottle before use
Apply adhesive liberally to one surface only, position surfaces and press together while still wet. Immediately clamp for 30 minutes for softwoods and 1 hour for hardwoods. Alternatively, low clamping pressures (50lbs/in2) can be used with softwoods; higher pressures are recommended for hardwoods (100 – 150lbs/in2). Do not stress joint for 12 hours.
Wipe off excess adhesive while still wet with a damp cloth. If the wood is to be stained, any residual Aquadhere left on the timber surface may prevent the stain from taking to the wood.
Maximum strength is achieved after 12 hours, but longer in cold, damp conditions, or when used on dense timbers.
Cure slows significantly in humid, cold conditions.
Clean all tools with water before the adhesive is allowed to dry. If dry, soak in water until adhesive is soft.
Handy tips
1L covers approx. 8m2
To fill small gaps, Aquadhere can be mixed with sawdust.
Longer clamping times may be required for joints under high stress, or alternatively use Selleys 308 High-Stress Wood Glue.
Avoid contaminating Aquadhere with iron and steel, eg nails, etc. Aquadhere contaminated with rust (iron oxide) will stain brown/black in the presence of tannins in many kinds of wood.
On very porous surfaces applying a thin layer to each side and allowing to soaking in before applying a second layer to one side only may result in a stronger bond
Cured adhesive can be softened by prolonged contact with hot water or steam.
Sanding isn’t an effective way to prepare for gluing, as it often leaves an uneven surface and may clog the timber which can stop the glue from penetrating and impact on your result. A straight router can be used to trim the edge, but be sure to only remove as much as required to obtain a suitable edge for gluing.
If you are gluing over a larger surface, try using a small roller to aid in application.
For cleaning surfaces prior to application of adhesive, if the surface is porous, we would recommend using SELLEYS Liquid Sugar Soap. If the surface is non-porous eg glass or metal, firstly clean the surface with mineral turpentine and then again with methylated spirits. If there is old, difficult to remove residue such as old paint, we recommend using paint stripper such as SELLEYS Kwik Strip Smart. Ensure the surface is dry before applying the product.
Keep a canister of SELLEYS Sugar Soap Wipes nearby for a quick and effective cleanup.
Safety tips
Aquadhere is considered a non-hazardous material.
In case of eye contact, hold eye open and flush with plenty of water for 15 minutes.
Storage and re-use
For maximum shelf life store inside at moderate temperatures. Do not allow to freeze.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Selleys Araldite Extra Time Epoxy Adhesive 200ml
Araldite Extra Time is a strong two part epoxy that gives you an extended working time of up to 60 minutes. It is ideal for complex or multi piece assemblies where accurate positioning matters. Once cured it forms a tough, durable bond that dries translucent.
Why you will love it
Extended working time of 60 minutes for precise assembly
Holds up to 150 kg per cm² when fully cured on clean, abraded steel
Dries translucent for a neat finish
Versatile bonding across common materials
Suitable materials
Wood, metal, masonry, china, glass, leather, rubber, and most plastics. Not suitable for PTFE, polyethylene, or polypropylene. Pre test on leather and rubber for suitability.
Typical uses
Furniture repairs and assemblies
Fixing metal or timber components
General household, hobby, and craft bonding
Repairs on masonry, ceramics, and glass where a clear finish is preferred
Directions
Surface prep: abrade, clean, and dry both surfaces.
Pierce each tube using the spike in the cap. Dispense equal parts onto a clean disposable surface.
Mix thoroughly. Leave for 5 minutes, then mix again before applying. Mixed glue is usable for about 1 hour at 20°C. Do not use the plastic blister to mix.
Apply to both surfaces and join. Support if needed to prevent movement.
Avoid strain for 6 to 8 hours. Full strength develops after 24 to 72 hours depending on conditions.
Replace caps on the correct tubes to avoid cross contamination.
Clean up
Wipe away uncured adhesive with acetone. Once cured, mechanical removal is required.
Key specs
Technology
Two part epoxy
Working time
Up to 60 minutes
Initial handling
6 to 8 hours
Full cure
24 to 72 hours
Bond strength
Up to 150 kg per cm² on abraded steel when fully cured
Appearance
Dries translucent
Temperature resistance
Up to 80°C. Bond may soften above this but strength returns when temperature normalises.
Pack size
200 ml
Good to know
Allow longer bonding times in colder weather.
Product may discolor with UV exposure.
Store in a cool dry place.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Selleys Araldite Rapid Epoxy Adhesive 14 mL
Fast-setting, two-part epoxy for quick, durable repairs at home, in the workshop, or on site. The self-mixing syringe makes application clean and precise, setting in about 90 seconds and reaching handling strength soon after. Dries translucent for a neat finish.
Key benefits
Sets in approximately 90 seconds for rapid fixes
High strength bond up to 75 kg/cm² when fully cured
Dries translucent for low-visibility repairs
Self-mixing nozzle for easy, accurate application
Versatile bonding across common materials
Best for
Everyday repairs and small assemblies
Fixing chipped ceramics and china
Metal, glass, leather, rubber, and many plastics
Suitable materials
China, metal, glass, leather, rubber, and most plastics. Not suitable for PTFE, polyethylene, or polypropylene.
How to use
Prep Abrade, clean, and dry both surfaces.
Attach nozzle Remove cap, fit and lock the self-mixing nozzle, then purge a small amount until evenly mixed.
Apply Spread adhesive on both surfaces and join within 1 minute.
Hold Support the bond for about 10 minutes to prevent movement.
Cure Maximum strength develops after about 16 hours. Allow longer in cold conditions.
Clean up
Wipe away uncured adhesive with acetone. Remove and dispose of the used mixing nozzle before the adhesive sets in the tip.
Technical details
Technology
Two-part epoxy
Set time
About 90 seconds
Handling time
Approximately 10 minutes
Full cure
About 16 hours
Colour when dry
Translucent
Temperature resistance
Up to 60 °C
Pack size
14 mL self-mixing syringe
Good to know
Bond may soften above 60 °C and regains strength when cooled.
Pre-test on leather and rubber to confirm suitability.
May discolor with prolonged UV exposure.
Store in a cool, dry place. Replace cap after removing the used nozzle.
Safety
Follow the safety directions on the packaging. Use in a well-ventilated area and avoid skin contact. Keep out of reach of children.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Araldite Two-Part Epoxy Adhesive delivers maximum strength bonding for a wide range of materials. The mixed product gels in 2 hours, achieves initial bonding within 6–8 hours, and reaches full strength after 3 days.
Features
Chemical reaction of the two parts provides superior strength
Bonds a wide variety of surfaces
Dries clear for a clean finish
Extremely strong and durable
Highly water resistant – suitable for fixing tiles around pools (not below the waterline)
Forms a rigid, long-lasting bond
Fills small gaps – surfaces do not need to fit perfectly
Excellent chemical and heat resistance
Clamping recommended for a stronger bond
Not suitable for Polypropylene or Polyethylene plastics
Bond strength weakens above 80°C but recovers when cooled
Appearance
Translucent
Where to Use
Load-bearing repairs
Fixing loose table or chair legs
Reattaching hammer heads
Bonding aluminium sheets
Timber repairs on boats
Repairing splits and cracks in cricket bats
Bonding fibreglass sheets or skis
Securing Dynabolts and metal rods into concrete
Suitable Materials
Glass
Metal
Wood
Fabric
Rigid plastic (except Polyethylene and Polypropylene)
Crystal
Leather
Directions for Use
Ensure all surfaces are clean, dry, and free of grease, rust, and paint.
For best results, roughen smooth surfaces after cleaning.
Dispense equal parts of Part A and Part B onto a clean, disposable surface (e.g. polyethylene or cardboard).
Mix thoroughly using a spatula, nail, or stick.
Apply immediately to both surfaces and press together. Clamp for 6–8 hours while the bond sets.
Remove excess adhesive and clean tools immediately.
Replace the correct caps on each tube to prevent hardening.
Handy Tips
Mix in small quantities for maximum working time – larger mixes cure faster.
Replace caps immediately after use and wipe nozzles with acetone or nail polish remover.
Do not swap caps between tubes – lids and tubes are colour coded.
Uncured Araldite can be wiped off with acetone or nail polish remover.
Once cured, remove mechanically by scraping or sanding – solvents will not dissolve it.
To reposition a cured bond, heat gradually to 150°C (if the item is heat resistant), reposition, and allow to cool.
For surface prep: use Selleys Liquid Sugar Soap on porous materials, or Methylated Spirits on non-porous surfaces. Use Selleys Kwik Strip Smart to remove tough residues if needed.
Safety Tips
Avoid contact with skin and eyes.
Avoid breathing vapours.
Do not use solvents near eyes or open wounds.
In case of eye contact, rinse with water for at least 15 minutes and seek medical advice.
Non-toxic once fully cured. Refer to the Material Safety Data Sheet for more details.
Storage & Reuse
Ensure caps are replaced tightly after use and store in a cool, dry place.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Selleys ArmourFlex provides superior strength with instant grab and more flexibility than conventional adhesive/sealants.
Features
Superior strength & instant grab
No primer required
Watertight seal with a 10-year guarantee*
Can be applied to wet or damp surfaces with excellent adhesion
Non-bubbling
Better curing and extrudability (>5°C)
Easily paintable with 2 coats of water-based paints after product skins in 60 to 90 minutes
Sandable
Low VOC**
Long-lasting flexibility
Fast curing
No slump
Trafficable
Potable water approved AS/NZS4020 (Area to volume ratios
**Meets GBCA limits for general purpose and architectural sealants.
Where can this product be used?
Skylights
Walls
Patios
Floors
Fencing
Windows
Expanding joints in concrete
What materials is this product suitable for?
Concrete
Timber
Metals
Cement sheeting
Brick
Plasterboard
Ceramic tiles
Fibreglass
Most plastics (Pre-test before use. Not for polyethylene, polypropylene or Teflon.)
Ensure substrates are clean and free of oil, grease or loose particles.
Cut seal and nozzle and fit to cartridge, then place in caulking gun.
Hold caulking gun at 45° angle and gun sealant ahead of nozzle ensuring product is pushed into joint.
For neat joints, use masking tape on both sides of the joint and remove before skinning.
Tool with a soapy solution before skinning occurs.
For optimal joint design, use non-absorbent backing material (e.g. polyethylene backer rod) and appropriate joint width/depth. See technical data sheet for more information.
Limitations:
Not suitable on polyethylene, polypropylene or Teflon.
Not for permanent water immersion or below water-line use.
In dry conditions, surfaces can be misted with water to speed up cure.
Paint with water-based paint. A minimum of two coats are necessary to ensure proper wetting out the sealant surface
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Selleys Auto Fix Auto Sealant Translucent 100 mL Keep water out and vibrations at bay with a clear automotive sealant that bonds fast and stays flexible. Selleys Auto Fix Auto Sealant is a 100 percent neutral cure silicone designed for cars, caravans, and general automotive sealing where a durable waterproof finish is essential. Why you will like it 100 percent neutral cure silicone Versatile general purpose sealant for automotive use Waterproof seal that resists vibration and temperature extremes UV and weather resistant for long lasting performance Skins in 5 minutes, set to touch in 30 minutes, full cure in 24 hours Where to use it Adheres to most auto and caravan materials, including: Glass and painted surfaces Fiberglass and most plastics Trim components Most rubbers Typical applications Sealing around lights, windows, and trim Gasket style sealing where a flexible waterproof joint is required General leak prevention and small gap sealing in automotive and caravan fittings Directions Preparation: Clean surfaces so they are free of dust, oil, and moisture. Wipe with mineral turpentine and allow to dry. Cut and load: Remove cap, unscrew nozzle, remove seal. Refit nozzle and cut at a 45 degree angle to the desired bead size. Apply: Squeeze the tube with steady pressure to lay a continuous bead. Smooth with a gloved finger before the sealant skins. Clean up: Before cure, clean tools and excess with mineral turpentine. Once cured, remove by cutting or scraping. After use: Replace cap. Let cured material in the nozzle be removed before next use. Handy tips Mask edges for neat joints. Remove tape before skin forms. Work within the skin time to achieve a smooth finish. Limitations Not recommended for Natural rubber, NBR, or Chloroprene Neoprene Technical details Technology 100 percent neutral cure silicone Colour Translucent Packaging Tube 100 mL Density 1.02 g per mL Application temperature -20°C to 50°C Skin time 5 minutes Shore A hardness 25 Elongation at break 370 percent Movement capability 25 percent Service temperature -40°C to 180°C VOC 26 g per L Clean up and storage Clean uncured sealant with mineral turpentine Store below 30°C in a cool dry place Use within 24 months from date of production Safety: Refer to the product SDS for handling and first aid information. Use in a well ventilated area and keep out of reach of children.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Selleys Auto Fix Windscreen Sealant 100 mL - Black Stop leaks fast around windscreens and windows with a durable, weather resistant silicone seal. Selleys Auto Fix Windscreen Sealant forms a waterproof barrier that resists vibration, UV and temperature extremes, keeping water, dust and drafts out. Why choose this sealant 100 percent neutral cure silicone for reliable sealing Forms a waterproof seal to stop leaks quickly UV and weather resistant for long term performance Skins in 5 minutes and is touch dry in about 30 minutes Handles joint movement up to 25 percent Suitable surfaces Glass and windscreens Rubber surrounds and trims Painted surfaces and most plastics Metal frames and channels Typical applications Sealing between windscreen glass and rubber Sealing between rubber and metal frames Stopping minor water ingress around vehicle windows General sealing where a flexible, black silicone finish is desired Key specifications
Technology
Neutral cure silicone
Colour
Black
Movement capability
Up to 25 percent
Skin time
About 5 minutes
Set time
About 30 minutes
Full cure
Approximately 24 hours
Service temperature
-40°C to 180°C
Application temperature
-20°C to 50°C
VOC
26 g/L
Pack size
100 mL tube
Directions Remove any dirt or moisture between the rubber and glass, or rubber and metal. Clean with mineral turpentine and allow to dry. Remove cap, unscrew nozzle, pierce inner seal, refit nozzle, then cut the tip at a 45 degree angle. Insert the nozzle between the rubber and glass or rubber and metal where possible. Squeeze the tube with steady pressure to push sealant into the joint. Smooth off with a gloved finger. If additional smoothing is needed, do it before the sealant skins. Clean up uncured sealant with mineral turpentine. Cured material must be cut or scraped away. Replace the cap after use. Allow sealant in the nozzle to cure, then remove before next use. Handy tips For neat lines, mask both sides of the joint and remove tape before the sealant skins. Best results occur when the joint is clean, dry and free of loose material. Limitations Not recommended on natural rubber, NBR or chloroprene neoprene due to poor adhesion. Clean up and storage Clean uncured sealant with mineral turpentine. Remove cured sealant by cutting or scraping. Store in a cool, dry place below 30°C. Use within 24 months of production. What you get 1 x Selleys Auto Fix Windscreen Sealant 100 mL - Black
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Make BBQ clean up quick and simple with Selleys Tough Wipes. These oversized, dual action wipes lift grease and grime from hotplates, grills and accessories, then trap the mess so you can get back to cooking. The textured nodules help scrub through build up without scratching, while the smooth side polishes surfaces clean.
Why you will love it
Removes BBQ grease and grime fast
Textured cleaning nodules to break up stubborn residue
Safe for food contact surfaces when used as directed
Use before or after you cook for a hygienically clean surface
Large wipe size for better coverage
Where to use
BBQ plates, grills and racks
BBQ hood and warming rack
Rotisserie and wok burner components
BBQ utensils and shelves
Interior health grills and sandwich presses
Public BBQs
Good to know
Wipe size: 250 mm x 275 mm
Available in multiple pack sizes
Impregnated wipe technology for effective cleaning
How to use
Open the resealable lid, peel back the sticker and pull out one wipe.
Use with the nodule side down to scrub plates, grills and other dirty surfaces.
No need to wipe dry. Heat the BBQ and start cooking once the surface is ready.
Reseal the pack to keep remaining wipes fresh. Dispose of used wipe in the rubbish bin.
Limitations
Heavily carbonised residue should be scraped off first for best results.
Pro tips
One to two wipes usually clean a standard BBQ. Very large or very dirty BBQs may need more.
Grease lifts more easily when the BBQ is slightly warm. Turn off heat and ensure it is cool enough to touch before cleaning.
For tough baked on build up or periodic deep cleans, pair with a dedicated BBQ cleaner.
Specifications
Type
Impregnated cleaning wipe
Surface compatibility
Most BBQ cooking surfaces and accessories. Always test on a small area first.
Wipe size
250 mm x 275 mm
Use locations
Indoor and outdoor
Pack sizes
Varies by retailer
What is in the box
Selleys Tough Wipes in a resealable pack.
Safety
Read and follow the instructions on pack.
Wash hands after use and keep out of reach of children.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Selleys Brick and Concrete Silicone is a neutral (non-corrosive) cure 100% silicone sealant. It is low modulus or can be stretched easily, which makes it ideal for joints which will move significantly such as expansion joints in concrete, and is grey so it will blend in with the concrete surrounds.
Features
Superior flexibility +/- 25% movement capability & up to 500% elongation or stretch.
Superior silicone formulation forms a durable seal which locks out water and which does not shrink when drying.
UV and weather resistant – Immune to the damaging effects of the sun.
Temperature resistance – approximately -60°C +150°C.
Superior adhesion to concrete and fibre cement surfaces.
Low odour so can be used in any environment without discomfort.
25 year guarantee – when used as directed, i.e. for private use and within 12 months of purchase, the product is guaranteed against crumbling, cracking or drying.
Colour
Grey
Appearance
Smooth
Where can this product be used?
joints in brick walls
expansion joints in concrete
Perfect for use on or around:
Walls
Patios
Floors
Fencing
Windows
Expansion joints in concrete.
Can not be painted over.
Not suitable for use in below waterline applications.
Do not use in below ground applications.
Not for use on polyethylene, polypropylene or Teflon. Pre-test plastics before use.
What materials is this product suitable for?
Bricks and mortar
Ceramics and porcelain
Concrete
Fibre cement
Marble & stone
Metal
Wood
Many plastics including polystyrene
How to use this product
Throughly clean and dry surface from oil, dirt and grease with Mineral Turpentine firstly and then Methylated Spirits. Allow to dry completely before applying silicone. If there old silicone which needs to be removed, we recommend using SELLEYS SILICONE REMOVER, this ingenous product makes removing old silicone easy.
We also recommend sanding the surface back with a good quality sanding block, such as a ROTA COTA Sanding Block Medium/Course grain, as the silicone will adhere more readily to a scratched up surface.
Ensure you tape both sides of the gap before applying the product. This ensures a neat finish and makes it easier to clean up.
Cut the seal at the top of the cartridge and cut the nozzle at a 45° angle, to the size of the gap opening. Fit the nozzle to the top of the cartridge.
Insert the cartridge into a caulking gun such as SELLEYS LIGHT SPEED Caulking gun. We recommend SELLEYS LIGHT SPEED Caulking Gun, as its new innovative pressure release design reduces the mess which results from run on and stress on your hands, which is critical if you are doing a lot of sealing.
Hold the caulking gun at a 45° angle. Press the nozzle opening against the joint, apply steady pressure to the caulking gun and extrude the silicone sealant forcing the sealant into the gap and move in a pushing motion, along the joint in one smooth action.
For a smooth finish, smooth with a finger dipped in mineral turpetine or for a professional finish use a paint scraper such as a 50mm ROTA COTA Soft Grip Scraper dipped in mineral turpetine.
Excess sealant must be cleaned up before the sealant skins in 5-10 minutes. Wipe excess away with a cloth dampened in mineral turpetine or use a SELLEYS Hand Kleen Wipes. Remove tape before the sealant skins. Clean tools immediately in mineral turpetine.
Avoid smearing on surrounding surfaces, see a handy tip.
The sealant will cure fully in 72 hours. As this point, any unwanted sealant can be removed by trimming with a sharp blade but avoid undercutting the seal.
Handy tips
Tips for Using a Brick & Concrete Silicone Sealant
Ensure you tape both sides of the gap before applying the product. This ensures a neat finish and makes it easier to clean up.
When first applying product, extrude a small amount onto a piece of scrap material to ensure a smooth continuous flow of silicone sealant.
Remove the tape before the silicone sealant skins.
For a better finish complete painting prior to use of the sealant as it can not be painted over.
For a better finish, use a spatula dipped in mineral turpentine or detergent and water to tool off the sealant.
Work in sections that can be completed before sealant skins. Tooling off and tape removal must be completed before skinning occurs or a rough surface may result, so working in sections allows for a better finish.
Keep a pack of SELLEYS Hand Kleen Wipes handy to wipe up any spills and for cleaning any material off the skin before it cures. They are an easy and effective way to keep clean on the job.
Safety tips
Uncured product may irritate eyes. If in eyes, flood the eyes for at least 15 minutes and seek medical advice.
Avoid contact with skin, if contact occurs, wipe off immediately and wash with detergent. It may irritate sensitive skin.
Avoid breathing in vapours.
Ensure you use a well-ventilated area as product releases methyl ethyl ketoxime while curing.
Keep away from children.
Storage and re-use
Store in cool dry conditions, below 30°C
The sealant should be used within 6 months after opening.
After use keep the nozzle on the cartridge
Silicone is a reactive product and is designed to cure once exposed to humidity. While the product may be stored for a few months once opened, it does have a limited shelf life. Storage in an upright position in a cool dry place is recommended to maximise the storage life.
If the sealant is going to be used again within a few days, leave the nozzle on and merely extrude approximately 2 cm of product before storing the cartridge upright. This will cure to a plug which can easily be pulled out when required.
For longer storage periods, leave the nozzle on and place a piece of plasticene or Blu Tack over the end of the nozzle. Tightly tape a piece of aluminium foil over the whole nozzle to exclude any air.
When you want to re-use the product, simply take off the foil and plug from the old nozzle pull out the excess silicone from the nozzle with a corkscrew, then re-pierce any cure at the tip of the cartridge and re-use.
If cure has taken place into the cartridge, the product is unlikely to be in a useable state and should be discarded.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Liquid Nails Clear eliminates unsightly mess caused by conventional brown construction adhesives because it dries clear and blends with the surrounding surface. It is ideal where a fine finish is important.
Uses
Selleys Liquid Nails Clear is suitable for bonding to glass, fibreglass, metals, most plastics*, timber, particleboard, MDF, tiles & ceramics, concrete, painted and masonry substrates.
Suitable for bonding mouldings & trims, skirting boards & architraves, general fabrication and creating mosaics.
Pre-test plastics to determine compatibility.
Technical Features
High performance solvent based adhesive. Note: When use on glass to glass, thin film application is recommended for better clarity.
Good paintability – Paintable with water based paints. Oil based paints require undercoating with water based paints first.
Excellent resistance to water and weather makes it suitable for interior and exterior applications.
Application Tips
Due to solvent content Liquid Nails Clear should not be used in enclosed space or without ventilation
Solvents may affect some plastics
Will not bond polyolefin plastics such as polyethylene and polypropylene
May damage some polycarbonate, avoid smears and spills
Cannot be used on polystyrene foam
May not adhere to wet absorbent surfaces or to some old wet metals
In very cold weather cartridge must be conditioned to room temperature before use
Not recommended for permanent water immersion or water containment structures
Must be first painted with water based paint prior to painting with oil based paints
Will not accept common wood stains. (If staining is required, it is recommended to stain timber before bonding).
Full cure in 2 weeks
Not recommended for mirrors
Bonds weaken at high temperatures. Avoid bonding metals or heavy materials which will be heated by direct sun. (Consult Selleys about particular applications subject to heating).
Ensure that surfaces are free from dust, loose particles and dry. Cut cartridge tip, pierce membrane inside base of nub, fit nozzle and cut end to desired opening and fit cartridge into cartridge gun. In very cold weather, cartridge may need to be conditioned to room temperature for easier gunning.
Direct a bead along the length of the joist, stud or batten. On broad flat surfaces apply beads every 40cm. (“zig-zag” beads are more appropriate on surfaces of moderate width)
Fix with sufficient nails, screws or clamping to hold load and achieve contact over the total bond area. Wet bonds are re-positionable for up to 20 mins after fitting
Allow adhesives to set (at least 24 – 48 hours) before removing any temporary fasteners or clamping. (refer to Bond strength Time)
For faster grab, apply to one surface only, press together and pull apart. Allow surfaces to dry 2-3 minutes before firmly
Technical Details and Performance
Time for strong bond depends on nature and condition of application. A minimum of 24 to 48 hours is needed for sufficient strength to develop. The bond will continue to strengthen over time. Full cure up to 14 days.
Curing is achieved by evaporation of solvent. Time to achieve full strength is increased: at constant low temperatures; when thick applications (joints) are used; wide areas are bonded; when bonded surfaces are impervious (e.g. metals and glass).
Indicative information only, not to be used for setting specifications.
Appearance
Clear soft adhesive
Viscosity
5000 – 9000P TE/2 @ 25oC
HAF/HELIPATH
Skin Time / Tack Free Time
5 min. @ 25oC
Specific Gravity
0.87g/mL
Extrudability
100g/min. @ 25oC (at 628kPa pressure through 3mm orifice)
Solid Content
60%
Cure
By evaporation of solvent
Water Based Paints
Good
Alkyd Paints
Good, after first undercoating with a water based paint
Flammability
Uncured adhesive- flammable Cured adhesive – will burn if ignited
Service Temperature
Maximum 80oC
Coverage
15 metres of a 5mm diameter bead
Cleaning
Clean off wet adhesive with mineral turps or white spirit. Dry adhesive can be removed by scraping or sanding.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Power Through Soap Scum & Kill 99.9% of Germs
Selleys Complete Clean Bathroom & Shower Spray is a household-grade disinfectant cleaner that cuts through tough soap scum, dirt and grime while killing 99.9% of common bathroom germs (S. aureus and E. coli). Ideal for showers, bathtubs and toilets for a sparkling clean finish.
Disinfects effectively: Kills 99.9% of germs (S. aureus & E. coli).
Fast soap scum removal: Powers through built-up residue on bathroom surfaces.
Household-grade disinfectant: Designed for hard, non-porous bathroom surfaces.
Where to Use
Suitable for hard, non-porous surfaces such as: showers, bathtubs, toilets and similar bathroom fixtures.
Not Suitable For
Marble, natural stone, porous tiles or aluminium surfaces
Polished, varnished or lacquered surfaces
Skin (hard surface disinfectant only)
Directions
Turn nozzle to ON while directing trigger away from face.
Spray directly onto the surface until fully covered.
For cleaning: wipe with a clean damp cloth or rinse.
For disinfecting: allow 10 minutes contact time, then wipe with a clean damp cloth.
On food-contact areas: rinse or wipe with a clean damp cloth after 10 minutes.
Good to Know
Always test on an inconspicuous area first.
Avoid prolonged contact with sensitive surfaces listed above.
Keep out of reach of children. Read label before use.
Product Details
Brand: Selleys
Range: Complete Clean
Type: Bathroom & shower disinfectant spray
Size: 750mL trigger spray
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Selleys Liquid Nails Direct Stick
Liquid Nails Direct Stick is a high strength polyurethane flooring adhesive designed for timber strip flooring and parquetry. Its semi rigid formula delivers a strong bond that helps reduce cupping and rafting. A controlled foaming action fills minor gaps. Fast cure means most floors can be sanded the next day to keep your project moving.
Key Features
High strength bond for timber flooring
Semi rigid formula to help reduce cupping and rafting
Foaming action fills small gaps and irregularities
Fast cure so you can sand the next day
Easy application with a strip flooring or parquetry trowel
Where It Works
Timber strip flooring
Parquetry installations
Interior floors on suitable, dry substrates
Technical Details
Technology
Polyurethane adhesive
Cure time
Overnight under normal conditions. Sand and finish the next day.
Application temperature
10°C to 30°C
Coverage
2 m² per 1 L using the correct trowel
20 m² per 10 L using the correct trowel
Clean up
Protect adjacent finishes. Wipe fresh adhesive from surfaces before cure.
Important Information
Apply with a strip flooring or parquetry trowel to achieve stated coverage.
Floors can usually be sanded the next day after proper cure.
Protect surrounding finishes from expansion during foaming.
Limitations
Not suitable for wet or damp substrates.
Avoid application below 10°C.
Directions for Use
Prepare the surface. Ensure substrates are clean, dry, sound, and free from dust, oil, and contaminants.
Apply adhesive. Use the correct strip flooring or parquetry trowel. Spread adhesive evenly within the working time.
Lay flooring. Place boards or parquetry into the wet adhesive. Press firmly to ensure full contact and adhesive transfer.
Allow to cure. Leave to cure overnight under recommended conditions.
Finish. Sand and finish the floor as required once the adhesive has cured.
Good to Know
Semi rigid bond helps manage seasonal timber movement.
Foaming action assists with minor surface irregularities and gap filling.
For best results, follow timber flooring manufacturer guidelines and site preparation standards.
Available sizes: typically 1 L and 10 L tubs. Check current availability on this page before ordering.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Liquid Nails Heavy Duty is a multipurpose construction adhesive that delivers extreme strength in a shorter space of time. The product is specifically designed for those demanding high performance applications, like attaching heavy or bulky materials, panelling, stone tiles, timber and furniture. Best of all it delivers heavy duty adhesion faster so you can get on with the next job.
Features
2 X more strength than Liquid Nails Original in less than half the time
Speed of cure means mechanical fasteners can be removed after 8 hours compared to 24 hours for Liquid Nails Original
No slump or stringing, even when applying a bead to overhead surfaces
Excellent resistance to water and weather makes it suitable for interior and exterior applications
Easy to extrude from the cartridge at low winter temperatures
Where can this product be used?
Sheet flooring to joists
Metal or aluminium door strips to floors and walls
Timber or fibre cement sheeting to cement block or brick walls
Masonite / hardboard to timber or floorboards
Wallboard or panelling to wood or metal frames
Cork tiles to timber, fibre cement or plaster
Timber flooring to yellow tongue in conjunction with mechanical fixings to avoid later squeaking
What materials is this product suitable for?
Timber
MDF
Plasterboard
Plastics (Pre-test to determine suitability)
Masonry
Concrete
Particleboard
Metals
Rubber
Glass
Tiles & ceramics
How to use this product
Avoid contact with skin and eyes.
Surfaces to be bonded should be free of oil, grease and dust. On wet timber pooled water should be wiped off. Cut cartridge tip, fit nozzle and cut end to desired opening. (Approx 5 mm diameter).
WET BOND METHOD
Direct a bead along the length of the joist, stud or batten. On broad flat surfaces apply beads every 40 cm. (‘zig-zag’ beads are more appropriate on surfaces of moderate width; eg shiplap panels.)
Fix with sufficient nails, screws or clamping to hold load and achieve contact over the total bond area. Wet bonds are repositionable for up to 15 mins after fitting.
Allow adhesives to set (at least 8 hours) before removing any temporary fasteners or clamping.(Refer to Bond Strength Time.)
CONTACT BOND METHOD – for faster grab
Apply a bead to one surface only, press together and pull apart.
Allow surfaces to dry 2-4 minutes before firmly joining. Surfaces should not be kept apart for longer than 10 minutes as to do so will impair bond strength
Flooring:
When fixing sheet flooring (e.g. particleboard), use in conjunction with flooring manufacturer’s installation specifications for minimum nailing requirements. Note: To eliminate squeaks in tongue and groove flooring, use Liquid Nails Heavy Duty in conjunction with mechanical fixings.
Handy tips
Time for strong bond depends on nature and condition of application. In most situations^ strong bond can be achieved after 8 hours and will continue to strengthen over a 2-3 day period. Full cure can take up to 7 days.
^Curing is achieved by evaporation of solvent. The time required to achieve the bond’s full strength is increased by: constant low temperatures; thick applications (joints) are used; wide areas are bonded; and when bonded surfaces are impervious (e.g. metals and dense timbers).
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Selleys Ezy Glide: The Dry Lubricant Solution for Any Surface, Anywhere
No More Squeaks, No More Sticking: All-Surface Dry Lubricant
Introducing Selleys Ezy Glide, a dry, non-oily lubricant that offers long-lasting lubrication while avoiding dirt and dust accumulation. Designed for a multitude of surfaces, it's your go-to for making things glide effortlessly.
Key Features:
Contains a dry lubricant (PTFE)
Dries clear
Long-lasting lubrication
Does not attract dirt and dust
Non-oily lubricant
Applications Include:
Windows
Drawers
Zipper Doors
Locks
Indoor/Outdoor Furniture
Roller Door Tracks
Curtain Tracks
Sailboat Runners
Children's Toys
Sliding Glass Doors and Mirrors
Suitable Materials:
Wood
Metal
Leather
Other Absorbent Surfaces
How to Use:
Shake the 150g aerosol can well.
Hold the can approximately 80-100 mm (3-4") from the surface and spray lightly.
Allow a few minutes for drying.
Limitations & Tips:
Ezy Glide may not be compatible with some materials like plastics, and it produces a slippery coating. Test in an inconspicuous area first and avoid over-spraying onto floors.
Use the extension tube for hard-to-reach areas.
Ezy Glide does not contain silicone.
Avoid overspraying on fabric as it may mark the material.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Selleys Ezy Tack – Sticking things together, modelling, holding small objects, filling small gaps – people use Ezy Tack in hundreds of different ways. It is ideal for non-porous surfaces such as glass or metal, painted surfaces, vinyl coated wallpaper etc.
Ideal for:
Sticks memos & posters
Position table/office deco
Holds wall hanging & craft
Features:
Ezy Tack can be reused. Simply roll into a ball in your hand.
Non-toxic
Directions:
Ensure surfaces are clean, dry, free from grease and lose materials.
Tear off the amount you require, knead until supple.
Roll into a ball.
Place between surfaces to be fastened and press firmly, Ezy Tack performs best on non-porous surfaces, vinyl coated wallpapers, painted surfaces, glass, metal, etc.
To remove Ezy Tack, ROLL IT OFF CAREFULLY from the surface. Any remaining shreds can be removed by rolling or dabbing a bigger piece of Ezy Tack over the area.
Handy Tips:
Do not use Ezy Tack on absorbent, silk-screen printed, hand-stencilled wallpaper, or recently decorated surfaces.
On some surfaces, Ezy Tack may leave a faint oily mark but this can be removed using a citrus based stain remover.
The adhesive qualities of Ezy Tack increase with time, so take extra care when removing it after a period of time.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Liquid Nails Fast is a water-based high strength (*) construction adhesive with fast grab and low odour. It has a thick, non-runny consistency and is ideal for adhering timbers and other porous construction materials. After drying it is beige (light tan) in colour.
Uses
Liquid Nails Fast has high initial (immediate) grab which reduces the need to support joins while the adhesive cures. The initial grab works best with porous surfaces.
It will bond to many building materials including MDF, particle board, timber, plaster board, styrene foam, masonry, concrete, tiles, ceramics, metals, plastics*, rubber and glass. Faster results are achieved when at least one surface is porous.
Liquid Nails Fast would typically be used for the following applications:
Areas where nailing is not desirable
Skirting boards, architraves, cornices
Wall panelling to masonry
Styrene foam to metal roofing
Technical Features
Fast grab – high initial holding minimises slippage when adhering on vertical surfaces
Meets or exceeds AS 2329-1999 (Mastic adhesives for fixing wall boards)
Does not drip, sag or string between panels
Bridges gaps and will adhere materials with uneven surfaces
Low mess – excess and squeeze out is easily cleaned up with wet cloth
No solvent fumes – ideal for large indoor jobs
High flexibility – will withstand thermal movement and vibration
High heat resistance – will not lose bonds exposed to sun
Paintable when dry
Easy to extrude at all temperatures
Application Tips
Liquid Nails Fast should always be used in conjunction with permanent mechanical fasteners except in low stress applications such as wall panelling and fixing light weight objects. (Bonds may creep under constant heavy loads.)
Bonds are not water resistant. Protect bonds from water penetration if used in exterior applications.
In cold or damp weather and between non-porous materials drying time is greatly extended
Thick applications take longer to dry than thin applications
Pre-test plastics to determine suitable bonding. Adheres well to UPVC. Not suitable for polyethylene and polypropylene. For wood flooring applications Liquid Nails (solvent based) is recommended. [Liquid Nails Fast is satisfactory for fixing sheet flooring (particleboard/ply) to joists in conjunction with the manufacturer’s minimum nailing specification but is not recommended for fixing sheet wood flooring to flat surfaces such as existing or concrete floors.
Technical Details and Performance
For porous substrates good bond strength is achieved after 24 hours and will continue to strengthen over 2-3 day period. Time for strong bond depends on nature and conditions of application. In cold or damp weather and between non-porous materials, drying time is greatly extended.
Indicative information only, not to be used for setting specifications.
Appearance
Lump free, air-free smooth beige paste
Specific Gravity
Approx. 1.44g/mL @ 25oC
Viscosity
Typical 7000 – 9000 Poise
Slump
Typical: 0mm
Shear Adhesion Strength (7 days) (AS2329)
Greater than 1500kPa (Hoop pine substrate)
Peel Adhesion Strength (7 days cure)
Typical 40N/25mm (wire gauze off hoop pine.(Variant to AS2329))
Initial Bond Strength AS2329-1999D (Tested after 24 hrs)
Over 200kPa
Heat Resistance
Bonds will resist temporary exposure to temperatures up to 140oC. Constant high temperatures will reduce constant load holding power (see below).
Creep resistance (under constant load)*2
Fully cured *1 bonds of 625 sq. mm will hold up to 500g loads (7.8kPa) in shear at constant 80oC
Fully cured *1 bonds of 625 sq.mm will hold up to 100kPa in shear at 25oC (equivalent to 6Kg load on 625 sq.mm bond area)
Coverage
15 metres of a 5mm diameter bead
1mm thick bonds on porous substrates cured at least 7 days at temps above 25oC
This data is provided as indicative only. Not to be used for design purposes. Thick bonds reduce constant load holding power and increase curing time. Larger bond areas increase curing time.
Cleaning
Liquid Nails Fast may be cleaned off with hot soapy water or a damp cloth while still wet. Dry adhesive is best removed by scraping or peeling.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Liquid Nails Fast is a water-based high strength (*) construction adhesive with fast grab and low odour. It has a thick, non-runny consistency and is ideal for adhering timbers and other porous construction materials. After drying it is beige (light tan) in colour.
UsesLiquid Nails Fast has high initial (immediate) grab which reduces the need to support joins while the adhesive cures. The initial grab works best with porous surfaces.
It will bond to many building materials including MDF, particle board, timber, plaster board, styrene foam, masonry, concrete, tiles, ceramics, metals, plastics*, rubber and glass. Faster results are achieved when at least one surface is porous.
Liquid Nails Fast would typically be used for the following applications:
Areas where nailing is not desirableSkirting boards, architraves, cornicesWall panelling to masonryStyrene foam to metal roofing
Technical FeaturesFast grab – high initial holding minimises slippage when adhering on vertical surfacesMeets or exceeds AS 2329-1999 (Mastic adhesives for fixing wall boards)Does not drip, sag or string between panelsBridges gaps and will adhere materials with uneven surfacesLow mess – excess and squeeze out is easily cleaned up with wet clothNo solvent fumes – ideal for large indoor jobsHigh flexibility – will withstand thermal movement and vibrationHigh heat resistance – will not lose bonds exposed to sunPaintable when dryEasy to extrude at all temperatures
Application TipsLiquid Nails Fast should always be used in conjunction with permanent mechanical fasteners except in low stress applications such as wall panelling and fixing light weight objects. (Bonds may creep under constant heavy loads.)Bonds are not water resistant. Protect bonds from water penetration if used in exterior applications.In cold or damp weather and between non-porous materials drying time is greatly extendedThick applications take longer to dry than thin applicationsPre-test plastics to determine suitable bonding. Adheres well to UPVC. Not suitable for polyethylene and polypropylene. For wood flooring applications Liquid Nails (solvent based) is recommended. [Liquid Nails Fast is satisfactory for fixing sheet flooring (particleboard/ply) to joists in conjunction with the manufacturer’s minimum nailing specification but is not recommended for fixing sheet wood flooring to flat surfaces such as existing or concrete floors.
Technical Details and PerformanceFor porous substrates good bond strength is achieved after 24 hours and will continue to strengthen over 2-3 day period. Time for strong bond depends on nature and conditions of application. In cold or damp weather and between non-porous materials, drying time is greatly extended.
Indicative information only, not to be used for setting specifications.
AppearanceLump free, air-free smooth beige paste
Specific GravityApprox. 1.44g/mL @ 25oC
ViscosityTypical 7000 – 9000 Poise
SlumpTypical: 0mm
Shear Adhesion Strength (7 days) (AS2329)Greater than 1500kPa (Hoop pine substrate)
Peel Adhesion Strength (7 days cure)Typical 40N/25mm (wire gauze off hoop pine.(Variant to AS2329))
Initial Bond Strength AS2329-1999D (Tested after 24 hrs)Over 200kPa
Heat ResistanceBonds will resist temporary exposure to temperatures up to 140oC. Constant high temperatures will reduce constant load holding power (see below).
Creep resistance (under constant load)*2Fully cured *1 bonds of 625 sq. mm will hold up to 500g loads (7.8kPa) in shear at constant 80oC
Fully cured *1 bonds of 625 sq.mm will hold up to 100kPa in shear at 25oC (equivalent to 6Kg load on 625 sq.mm bond area)
Coverage15 metres of a 5mm diameter bead
1mm thick bonds on porous substrates cured at least 7 days at temps above 25oCThis data is provided as indicative only. Not to be used for design purposes. Thick bonds reduce constant load holding power and increase curing time. Larger bond areas increase curing time.
CleaningLiquid Nails Fast may be cleaned off with hot soapy water or a damp cloth while still wet. Dry adhesive is best removed by scraping or peeling.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Features
Resists intense heat
Sets hard
Water clean up
Where can this product be used?
Repairing bricks in fireplaces and chimneys
Sealing flues in pot-belly stoves
Filling cracks in ironworks and bricks
What materials is this product suitable for?
Brick
Metal
Concrete
How to Use:
Remove all dust, grease and loose debris before applying material.
Dampen the cavities on porous surfaces for better adhesion.
Apply Fireproof Cement firmly into holes and cracks with a damp knife or spatula.
Allow Fireproof Cement to dry a minimum of 48 hours before exposure to heat.
If Fireproof Cement is stiff slacken with a little water.
Limitations:
Fireproof Cement is not an adhesive - it is a filling compound.
Not recommended for external use e.g. BBQ's, incinerators etc.
Fireproof Cement is not suitable for use in kilns.
Fireproof Cement is not recommended for moving joints such as expansion joints as it sets rigidly
Hardened material cannot be resoftened with water.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Flexiseal FC is a fast curing polyurethane Adhesive and Sealant with high flexibility and excellent adhesion. Waterproof+, suitable for indoor and outdoor applications^, paintable after it has cured.
Best for : Common building materials such as concrete, brick, masonry, ceramic tile, metals, softwood, hardwood and some plastics*.
Product Details
Where can this product be used?
External wall and cladding joints
Weatherproofing joints between brickwork, masonry, wood concrete or metal frames
Joints in walls, balconies, around window or door frames
Joints in bridge and balcony parapets
Retaining walls
Roofing
Acoustic rated walls
What materials is this product suitable for?
Common building materials such as concrete, brick, masonry, ceramic tile, metals, softwood, hardwood and some plastics*.
*Will not adhere to PE, PP or PTFE–test other plastics and rubber first.
How to Use
AS AN ADHESIVE: Apply a bead or small blobs on surface. Assemble parts together and clamp firmly to hold until cured. Remove excess immediately. Initial bond achieved in 24 hours depending on temperature and humidity. Bond strength increases over a few days.
AS A SEALANT: Extrude sealant into the joint ensuring full contact with the sides of joint. Avoid entrapment of air. Smooth sealant with spatula forcing it into the joint. For best performance, install joint backing rod (polyethylene or polyurethane foam rod) in the joint to control depth and ensure joint movement. Suitable for +/- 25% joint movement. Complies with ISO11600/F/25HM.
Limitations:
*Will not adhere to PE, PP or PTFE–test other plastics and rubber first.
^To maximise durability in outdoor applications paint with a suitable exterior paint. Some colours may discolour after exposure to UV radiation.
+Not suitable for permanent water immersion or below water line use.
Clean Up
Mineral turps. Cured product can only be removed mechanically
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Selleys Glass Silicone is an acetic acid curing 100% silicone, which has excellent adhesion to glass and has been specially formulated for glazing and aquarium construction.
Features
The acetic curing formulation results in superior adhesion on glass and glazing surfaces.
Superior silicone formulation forms a durable seal and which does not shrink when drying.
UV and weather resistant remaining flexible, not shrinking, crumbling, cracking or drying out.
Temperature resistance – approximately -60°C +150°C
Superior flexibility +/- 25% movement capability & up to 400% elongation or stretch.
25-year guarantee – when used as directed, i.e. for private use and within 12 months of purchase, the product is guaranteed against crumbling, cracking or drying.
Colour
Clear
Appearance
Smooth
Where can this product be used?
Windows
Glass aquariums
Perfect for use on or around:
Windows
Windows Frames
Glass Aquariums
Repairs gaskets in dryers, ovens, refrigerators and washing machines.
Repairs rips in awnings.
Will not adhere to concrete, cement products, zinc or copper containing metals, marble, limestone or lead.
Can not be painted over.
Not suitable for use on oily woods such as cypress, teak or cedar.
Not suitable for use on roofs and gutters as it will cause corrosion. Use SELLEYS Roof and Gutter Silicone.
Not for use on polyethylene, polypropylene or Teflon. Pre-test plastics before use.
What materials is this product suitable for?
Glass
Aluminium
Stainless Steel
Many plastics including polystyrene
Most woods
Rubber/ canvas
Glazed ceramics & porcelain
How to use this product
Thoroughly clean and dry surface from oil, dirt and grease with Mineral Turpentine firstly and then Methylated Spirits. Allow drying completely before applying silicone. If there is old silicone which needs to be removed, we recommend using SELLEYS SILICONE REMOVER, this ingenious product makes removing old silicone easy.
Ensure you tape both sides of the gap before applying the product. This ensures a neat finish and makes it easier to clean up.
Cut the seal at the top of the cartridge and cut the nozzle at a 45° angle, to the size of the gap opening. Fit the nozzle to the top of the cartridge.
Insert the cartridge into a caulking gun such as SELLEYS LIGHT SPEED Caulking gun. We recommend SELLEYS LIGHT SPEED Caulking Gun, as its new innovative pressure release design reduces the mess which results from run on and stress on your hands, which is critical if you are doing a lot of sealing.
Hold the caulking gun at a 45° angle. Press the nozzle opening against the joint, apply steady pressure to the caulking gun and extrude the silicone sealant forcing the sealant into the gap and move in a pushing motion, along the joint in one smooth action.
For a smooth finish, smooth with a finger dipped in mineral turpetine or for a professional finish use a paint scraper such as a 50mm ROTA COTA Soft Grip Scraper dipped in mineral turpetine.
Excess sealant must be cleaned up before the sealant skins in 5-10 minutes. Wipe excess away with a cloth dampened in mineral turpetine or use a SELLEYS Hand Kleen Wipe. Remove tape before the sealant skins. Clean tools immediately in mineral turpetine.
Avoid smearing on surrounding surfaces, see handy tip.
Sealant will cure fully in 72 hours. As this point, any unwanted sealant can be removed by trimming with a sharp blade but avoid undercutting the seal.
For aquariums, allow the product to fully cure for 7 days. Prior to usage, thoroughly wash out with water, drain and refill before introducing fish. Suitable for constructing and repairing small aquariums. The specialist design required for large tanks. Contact SELLEYS if unsure.
Handy tips
Tips for Using a Silicone Sealant on Glass
Ensure you tape both sides of the gap before applying the product. This ensures a neat finish and makes it easier to clean up.
The depth of the sealant should be no more than 10mm in joints. To fill larger joints use a suitable backing rod (such as closed cell polyethylene foam or similar), leaving the gap depth no larger than half the width of the joint.
When first applying product, extrude a small amount onto a piece of scrap material to ensure a smooth continuous flow of silicone sealant.
Remove the tape before the silicone sealant skins.
For a better finish complete painting prior to use of the sealant as it can not be painted over.
For a better finish, use a spatula dipped in mineral turpetine or detergent and water to tool off the sealant.
Work in sections that can be completed before sealant skins. Tooling off and tape removal must be completed before skinning occurs or a rough surface may result, so working in sections allows for a better finish.
Keep a pack of SELLEYS Hand Kleen Wipes handy to wipe up any spills and for cleaning any material off the skin before it cures. They are an easy and effective way to keep clean on the job.
Safety tips
Uncured product may irritate eyes. If in eyes, flood the eyes for at least 15 minutes and seek medical advice.
Avoid contact with skin, if contact occurs, wipe off immediately and wash with detergent. It may irritate sensitive skin.
Avoid breathing in vapours.
Ensure you use a well-ventilated area as product releases acetic acid while curing.
For advice, contact a Poisons Information Centre (AUS 131 126; NZ 0800 764 766) or a doctor.
For further detail on the safe use of this product, please refer to the Material Safety Data Sheet, which can be downloaded from this site.
Keep away from children.
Storage and re-use
Store in cool dry conditions, below 30°C
The sealant should be used within 6 months after opening.
After use, keep the nozzle on the cartridge.
Silicone is a reactive product and is designed to cure once exposed to humidity. While the product may be stored for a few months once opened, it does have a limited shelf life. Storage in an upright position in a cool dry place is recommended to maximise the storage life.
If the sealant is going to be used again within a few days, leave the nozzle on and merely extrude approximately 2 cm of the product before storing the cartridge upright. This will cure to a plug which can easily be pulled out when required.
For longer storage periods, leave the nozzle on and place a piece of plasticene or Blu Tack over the end of the nozzle. Tightly tape a piece of aluminium foil over the whole nozzle to exclude any air.
When you want to re-use the product, simply take off the foil and plug from the old nozzle pull out the excess silicone from the nozzle with a corkscrew, then re-pierce any cure at the tip of the cartridge and re-use.
If cure has taken place into the cartridge, the product is unlikely to be in a useable state and should be discarded.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Selleys Glass Silicone is an acetic acid curing 100% silicone, which has excellent adhesion to glass and has been specially formulated for glazing and aquarium construction.
Features
The acetic curing formulation results in superior adhesion on glass and glazing surfaces.
Superior silicone formulation forms a durable seal and which does not shrink when drying.
UV and weather resistant remaining flexible, not shrinking, crumbling, cracking or drying out.
Temperature resistance – approximately -60°C +150°C
Superior flexibility +/- 25% movement capability & up to 400% elongation or stretch.
25-year guarantee – when used as directed, i.e. for private use and within 12 months of purchase, the product is guaranteed against crumbling, cracking or drying.
Colour
Clear
Appearance
Smooth
Where can this product be used?
Windows
Glass aquariums
Perfect for use on or around:
Windows
Windows Frames
Glass Aquariums
Repairs gaskets in dryers, ovens, refrigerators and washing machines.
Repairs rips in awnings.
Will not adhere to concrete, cement products, zinc or copper containing metals, marble, limestone or lead.
Can not be painted over.
Not suitable for use on oily woods such as cypress, teak or cedar.
Not suitable for use on roofs and gutters as it will cause corrosion. Use SELLEYS Roof and Gutter Silicone.
Not for use on polyethylene, polypropylene or Teflon. Pre-test plastics before use.
What materials is this product suitable for?
Glass
Aluminium
Stainless Steel
Many plastics including polystyrene
Most woods
Rubber/ canvas
Glazed ceramics & porcelain
How to use this product
Thoroughly clean and dry surface from oil, dirt and grease with Mineral Turpentine firstly and then Methylated Spirits. Allow drying completely before applying silicone. If there is old silicone which needs to be removed, we recommend using SELLEYS SILICONE REMOVER, this ingenious product makes removing old silicone easy.
Ensure you tape both sides of the gap before applying the product. This ensures a neat finish and makes it easier to clean up.
Cut the seal at the top of the cartridge and cut the nozzle at a 45° angle, to the size of the gap opening. Fit the nozzle to the top of the cartridge.
Insert the cartridge into a caulking gun such as SELLEYS LIGHT SPEED Caulking gun. We recommend SELLEYS LIGHT SPEED Caulking Gun, as its new innovative pressure release design reduces the mess which results from run on and stress on your hands, which is critical if you are doing a lot of sealing.
Hold the caulking gun at a 45° angle. Press the nozzle opening against the joint, apply steady pressure to the caulking gun and extrude the silicone sealant forcing the sealant into the gap and move in a pushing motion, along the joint in one smooth action.
For a smooth finish, smooth with a finger dipped in mineral turpetine or for a professional finish use a paint scraper such as a 50mm ROTA COTA Soft Grip Scraper dipped in mineral turpetine.
Excess sealant must be cleaned up before the sealant skins in 5-10 minutes. Wipe excess away with a cloth dampened in mineral turpetine or use a SELLEYS Hand Kleen Wipe. Remove tape before the sealant skins. Clean tools immediately in mineral turpetine.
Avoid smearing on surrounding surfaces, see handy tip.
Sealant will cure fully in 72 hours. As this point, any unwanted sealant can be removed by trimming with a sharp blade but avoid undercutting the seal.
For aquariums, allow the product to fully cure for 7 days. Prior to usage, thoroughly wash out with water, drain and refill before introducing fish. Suitable for constructing and repairing small aquariums. The specialist design required for large tanks. Contact SELLEYS if unsure.
Handy tips
Tips for Using a Silicone Sealant on Glass
Ensure you tape both sides of the gap before applying the product. This ensures a neat finish and makes it easier to clean up.
The depth of the sealant should be no more than 10mm in joints. To fill larger joints use a suitable backing rod (such as closed cell polyethylene foam or similar), leaving the gap depth no larger than half the width of the joint.
When first applying product, extrude a small amount onto a piece of scrap material to ensure a smooth continuous flow of silicone sealant.
Remove the tape before the silicone sealant skins.
For a better finish complete painting prior to use of the sealant as it can not be painted over.
For a better finish, use a spatula dipped in mineral turpetine or detergent and water to tool off the sealant.
Work in sections that can be completed before sealant skins. Tooling off and tape removal must be completed before skinning occurs or a rough surface may result, so working in sections allows for a better finish.
Keep a pack of SELLEYS Hand Kleen Wipes handy to wipe up any spills and for cleaning any material off the skin before it cures. They are an easy and effective way to keep clean on the job.
Safety tips
Uncured product may irritate eyes. If in eyes, flood the eyes for at least 15 minutes and seek medical advice.
Avoid contact with skin, if contact occurs, wipe off immediately and wash with detergent. It may irritate sensitive skin.
Avoid breathing in vapours.
Ensure you use a well-ventilated area as product releases acetic acid while curing.
For advice, contact a Poisons Information Centre (AUS 131 126; NZ 0800 764 766) or a doctor.
For further detail on the safe use of this product, please refer to the Material Safety Data Sheet, which can be downloaded from this site.
Keep away from children.
Storage and re-use
Store in cool dry conditions, below 30°C
The sealant should be used within 6 months after opening.
After use, keep the nozzle on the cartridge.
Silicone is a reactive product and is designed to cure once exposed to humidity. While the product may be stored for a few months once opened, it does have a limited shelf life. Storage in an upright position in a cool dry place is recommended to maximise the storage life.
If the sealant is going to be used again within a few days, leave the nozzle on and merely extrude approximately 2 cm of the product before storing the cartridge upright. This will cure to a plug which can easily be pulled out when required.
For longer storage periods, leave the nozzle on and place a piece of plasticene or Blu Tack over the end of the nozzle. Tightly tape a piece of aluminium foil over the whole nozzle to exclude any air.
When you want to re-use the product, simply take off the foil and plug from the old nozzle pull out the excess silicone from the nozzle with a corkscrew, then re-pierce any cure at the tip of the cartridge and re-use.
If cure has taken place into the cartridge, the product is unlikely to be in a useable state and should be discarded.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Features
Simply sticks almost anything without screws or clamps*
Instantly holds even on vertical surfaces*
Adjustable for up to 15 minutes
UV & water-resistant
Holds up to 360kg/ m²
Where can this product be used?
Indoors and outdoors for any bonding applications
What materials is this product suitable for?
Glass
Metals
Timber
Brick
Concrete / masonry
Tiles
Not for polyethylene, polypropylene or teflon
Colours White
Technology Sil-X®
Use Interior Exterior
How to use
Make sure surfaces are clean, free from grease, girt and grime. Sand back any loose or peeling surfaces.
Pull off cap, unscrew nozzle and pierce membrane with the tip of the nozzle. Replace nozzle and cut along the second ridge.
Cover one surface in the adhesive in long vertical strips.
After applying the adhesive, press surfaces together firmly, ensuring the adhesive spreads.
Clean up any excess product with methylated spirits.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Features
Simply sticks almost anything without screws or clamps*
Instantly holds even on vertical surfaces*
Adjustable for up to 15 minutes
UV & water-resistant
Holds up to 360kg/ m²
Where can this product be used?
Indoors and outdoors for any bonding applications
What materials is this product suitable for?
Glass
Metals
Timber
Brick
Concrete / masonry
Tiles
Not for polyethylene, polypropylene or teflon
Colours White
Technology Sil-X®
Use Interior Exterior
How to use
Make sure surfaces are clean, free from grease, girt and grime. Sand back any loose or peeling surfaces.
Pull off cap, unscrew nozzle and pierce membrane with the tip of the nozzle. Replace nozzle and cut along the second ridge.
Cover one surface in the adhesive in long vertical strips.
After applying the adhesive, press surfaces together firmly, ensuring the adhesive spreads.
Clean up any excess product with methylated spirits.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Selleys Liquid Nails Instant Hold is a high performance advanced polymer construction adhesive that delivers an instant hold on any building material*, even vertical surfaces. It is heat, UV and water resistant and doesn’t require fasteners or clamps for many applications so you can get on with the next job. Powered by Sil-X Advanced Polymer Technology.
Features
Instant Hold on any building material*
Up to 400kgs M2
No need to clamp*
High Strength & flexibility
Indoor/Outdoor
Adheres to wet and damp surfaces and can be applied on wet surface^
Cure time of 48 hours
Paintable after 24 hours with water based paints. Solvent based paints may be used after first painting with a water based paint
Adjustable e.g. can be straightened for up to 15 minutes
Powered by Sil-X Advanced Polymer Technology
*Holds instantly but must not be disturbed until fully cured. Weight is restricted for non-porous substrates including metal & glass – support may be required where the object exceeds 5kgs.
^Not for permanent water immersion
What Materials is this product suitable for?
Timber
MDF
Plasterboard
Some plastics Masonry
Concrete
Particleboard
Metals
Glass
Tiles & ceramics
How to use the product
Ensure surfaces are clean and free from grease or loose particles
Use a high thrust caulking gun and the supplied V-notch nozzle to apply in vertical stripes 5cm apart. Ensure the V shape is angled upward when applying.
Position materials and press together firmly. Due to the high initial hold of the product support during curing is not necessary (subject to weight limitations for non-porous surfaces).
Holds instantly but must not be disturbed until cured (up to 48 hours).
Adjustable e.g. can be straightened for up to 15 minutes
Handy Tips
Clean up with turps before the adhesive cures
Safety Information
KEEP OUT OF REACH OF CHILDREN.
Avoid skin and eye contact and breathing vapours.
Use in a well ventilated area.
Wash hands after use.
If on skin: Wash with soap and water.
Product releases methanol during cure. Refer to Safety Data Sheet.
Storage & re-use
Cure product before disposal
Store in a cool place.
The adhesive should be used within 6 months after opening.
If the adhesive is going to be used again within a few days, leave the nozzle on and merely extrude approximately 2 cm of product before storing the cartridge upright. This will cure to a plug which can easily be pulled out when required.
For longer storage periods, leave the nozzle on and place a piece of plasticene or Blu Tack over the end of the nozzle. Tightly tape a piece of aluminium foil over the whole nozzle to exclude any air.
When you want to re-use the product, simply take off the foil and plug from the old nozzle pull out the excess adhesive from the nozzle with a corkscrew, then re-pierce any cure at the tip of the cartridge and re-use.
If cure has taken place into the cartridge, the product is unlikely to be in a useable state and should be disposed.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
A versatile hand kneadable, fast setting co-extruded epoxy repair system that can be used for repairing a multitude of things. It is especially suitable for application to damp, wet or underwater substrates. It comes in a handy roll form, with the white hardener encapsulated in the aqua green resin part. The product hardens in 20 – 30 minutes after mixing, to a white solid material.
Features
Will not sag, run or drip.
Easy to use – no mess.
Can be drilled, sawed, sanded, filed, tapped, machined or painted one hour after mixing.
Good adhesive strength.
Can be used to reshape, rebuild and repair a multitude of surfaces and applications.
Good gap filling properties.
Long-lasting, durable solution.
Heat resistant to 120°C continuously or 140°C intermittently.
Can be used under fresh or salt water.
Longer set time (less than 20 min).
Suitable for contact with drinking water. Complies with AS/NZS 4020, QAS Type Test Certificate No.: 8649.
Higher tack for underwater repairs.
Where can this product be used?
Creating water features/ attaching pebbles under water in a pond
Sealing holes in foundations and outer walls
Repairing generators, water and fuel pumps
Re-setting ceramic tiles in swimming pools etc
For fast and permanent repairs to damp and wet substrates, and even for underwater repairs
Patching dings, scratches, cuts, gouges and holes in fibreglass, metal and wooden boat decks and hulls
Repair of pipes, fittings, electrical connections, water tanks, tubs, sinks, spas, hot tubs, tanks, pools, leaking gaskets
Forming custom gaskets etc
Ideal for emergency in-water repairs
Repairing fishtanks, ponds, pools
Approval for Drinking Water Contact to AS/’NZ4020:2005, however, limited to maximum surface area: volume ratio of 648 mm2/L; minimum cure time: 72 hours at 20°C; maximum temperature: 85°C; maximum wet film thickness: 5 – 6mm
Not recommended for filling or sealing joints/cracks subject to movement as the cured product is extremely hard and inflexible.
Does not adhere to polyethylene, polypropylene or Polytetrafluoroethylene (Teflon?) or silicone rubber
Set time increases at temperatures below 20°C
Not recommended for use where hydrostatic pressure is present prior to cure
What materials is this product suitable for?
Fibreglass
Wood/Timber
Ceramics
Metal
Concrete
Glass
Most plastics (pre-test required)
Masonry
How to use this product
Clean surface free of grease, dirt and dust. For best results roughen bond area prior to cleaning.
Cut off required amount. Replace disc on the remaining portion. Wear gloves to avoid messing hands. To mix, knead with fingers to a uniform colour. If mixing is difficult, warm to room temperature.
Apply to surface to be repaired (within 12 minutes of mixing) and work the material forcefully into the surface applying pressure until adhesion begins to take effect. Mould to shape if required. If material sticks to fingers, use the plastic wrapper to press the material in place.
For a smooth appearance, remove excess and hand rub with water or damp cloth before hardening begins.
Trim away any excess before initial hardening. Remove any residues with acetone prior to initial hardening. Hardened excess may be sanded or trimmed away once fully cured.
After 20-30 minutes Knead-It Aqua will harden and begin to form a strong bond. Allow for longer cure times at lower temperatures.
After 60 minutes Knead-It Aqua may be drilled, sanded, machined, filed, sawed or painted.
Wash hands thoroughly with soap and water after use.
Handy tips
Ensure the putty and hardener are mixed properly. Knead-It will become warm as it is mixed, A good indication its mixed properly is when you have a uniform colour and feel a mild heat radiating from the knead-it.
To help determine when your knead it has set, keep a small piece off to check- when it is hard, it indicates your job is done.
For best results, use Knead-It Multi-Purpose for applications in contact with drinking water.
Use Knead-It Steel for applications on metal or fuel contact
Store in a cool place for maximum shelf life
For cleaning surfaces prior to application of adhesive, if the surface is porous, we would recommend using SELLEYS Liquid Sugar Soap. If the surface is non-porous eg glass or metal, firstly clean the surface with mineral turpentine and then again with methylated spirits. If there is old, difficult to remove residue such as old paint, we recommend using paint stripper such as SELLEYS Kwik Strip Smart. Ensure the surface is dry before applying the product.
Keep a canister of SELLEYS Sugar Soap Wipes nearby for a quick and effective cleanup.
Safety tips
Where possible wear protective gloves when using Knead-It Aqua. Contact with skin may result in irritation. Epoxy resin is a known skin sensitiser. Repeated or prolonged skin contact may lead to allergic contact dermatitis.
If redness or swelling of skin occurs, wash thoroughly with soap and water. Seek medical attention if in any doubt.
Mixed and cured material is not hazardous. Cured material can only be removed by cutting and abrasion. If cured on skin, it will peel off in a few days without assistance. Soaking in warm water will assist removal.
Storage and re-use
Replace siliver disc to seal ends and keep in a cool dry place.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
A versatile hand kneadable, fast setting co-extruded epoxy repair system that can be used for repairing a multitude of things. It is especially suitable for application to damp, wet or underwater substrates. It comes in a handy roll form, with the white hardener encapsulated in the aqua green resin part. The product hardens in 20 – 30 minutes after mixing, to a white solid material.
Features
Will not sag, run or drip.
Easy to use – no mess.
Can be drilled, sawed, sanded, filed, tapped, machined or painted one hour after mixing.
Good adhesive strength.
Can be used to reshape, rebuild and repair a multitude of surfaces and applications.
Good gap filling properties.
Long-lasting, durable solution.
Heat resistant to 120°C continuously or 140°C intermittently.
Can be used under fresh or salt water.
Longer set time (less than 20 min).
Suitable for contact with drinking water. Complies with AS/NZS 4020, QAS Type Test Certificate No.: 8649.
Higher tack for underwater repairs.
Where can this product be used?
Creating water features/ attaching pebbles under water in a pond
Sealing holes in foundations and outer walls
Repairing generators, water and fuel pumps
Re-setting ceramic tiles in swimming pools etc
For fast and permanent repairs to damp and wet substrates, and even for underwater repairs
Patching dings, scratches, cuts, gouges and holes in fibreglass, metal and wooden boat decks and hulls
Repair of pipes, fittings, electrical connections, water tanks, tubs, sinks, spas, hot tubs, tanks, pools, leaking gaskets
Forming custom gaskets etc
Ideal for emergency in-water repairs
Repairing fishtanks, ponds, pools
Approval for Drinking Water Contact to AS/’NZ4020:2005, however, limited to maximum surface area: volume ratio of 648 mm2/L; minimum cure time: 72 hours at 20°C; maximum temperature: 85°C; maximum wet film thickness: 5 – 6mm
Not recommended for filling or sealing joints/cracks subject to movement as the cured product is extremely hard and inflexible.
Does not adhere to polyethylene, polypropylene or Polytetrafluoroethylene (Teflon?) or silicone rubber
Set time increases at temperatures below 20°C
Not recommended for use where hydrostatic pressure is present prior to cure
What materials is this product suitable for?
Fibreglass
Wood/Timber
Ceramics
Metal
Concrete
Glass
Most plastics (pre-test required)
Masonry
How to use this product
Clean surface free of grease, dirt and dust. For best results roughen bond area prior to cleaning.
Cut off required amount. Replace disc on the remaining portion. Wear gloves to avoid messing hands. To mix, knead with fingers to a uniform colour. If mixing is difficult, warm to room temperature.
Apply to surface to be repaired (within 12 minutes of mixing) and work the material forcefully into the surface applying pressure until adhesion begins to take effect. Mould to shape if required. If material sticks to fingers, use the plastic wrapper to press the material in place.
For a smooth appearance, remove excess and hand rub with water or damp cloth before hardening begins.
Trim away any excess before initial hardening. Remove any residues with acetone prior to initial hardening. Hardened excess may be sanded or trimmed away once fully cured.
After 20-30 minutes Knead-It Aqua will harden and begin to form a strong bond. Allow for longer cure times at lower temperatures.
After 60 minutes Knead-It Aqua may be drilled, sanded, machined, filed, sawed or painted.
Wash hands thoroughly with soap and water after use.
Handy tips
Ensure the putty and hardener are mixed properly. Knead-It will become warm as it is mixed, A good indication its mixed properly is when you have a uniform colour and feel a mild heat radiating from the knead-it.
To help determine when your knead it has set, keep a small piece off to check- when it is hard, it indicates your job is done.
For best results, use Knead-It Multi-Purpose for applications in contact with drinking water.
Use Knead-It Steel for applications on metal or fuel contact
Store in a cool place for maximum shelf life
For cleaning surfaces prior to application of adhesive, if the surface is porous, we would recommend using SELLEYS Liquid Sugar Soap. If the surface is non-porous eg glass or metal, firstly clean the surface with mineral turpentine and then again with methylated spirits. If there is old, difficult to remove residue such as old paint, we recommend using paint stripper such as SELLEYS Kwik Strip Smart. Ensure the surface is dry before applying the product.
Keep a canister of SELLEYS Sugar Soap Wipes nearby for a quick and effective cleanup.
Safety tips
Where possible wear protective gloves when using Knead-It Aqua. Contact with skin may result in irritation. Epoxy resin is a known skin sensitiser. Repeated or prolonged skin contact may lead to allergic contact dermatitis.
If redness or swelling of skin occurs, wash thoroughly with soap and water. Seek medical attention if in any doubt.
Mixed and cured material is not hazardous. Cured material can only be removed by cutting and abrasion. If cured on skin, it will peel off in a few days without assistance. Soaking in warm water will assist removal.
Storage and re-use
Replace siliver disc to seal ends and keep in a cool dry place.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
A versatile, hand kneadable fast setting epoxy putty that is ideal for repairing, rebuilding, reshaping or restoring almost anything. It can be drilled, filed, machined, screwed, sawn, sanded and painted. Packaged in a handy roll so you can just cut off what you require and save the rest for another day, it hardens in 5-10 minutes, after mixing. Approved for contact with drinking water.
Features
Will not sag, run or drip
Easy to use – no mess
Can be drilled, sawed, sanded, filed, tapped, machined or painted one hour after mixing
Good adhesive strength
Can be used to reshape, rebuild and repair a multitude of surfaces and applications
Good gap filling properties
Long-lasting, durable solution
Heat resistant to 120°C continuously or 140°C intermittently
Can be used underwater. (but dry surfaces for application are best and recommended)
Rapid set time (<10 minutes)
Suitable for contact with drinking water. Complies with AS/NZS 4020, QAS Type Test Certificate No.: 8649
Excellent anchoring properties
Where can this product be used?
Repair and replacement – timber, metal, masonry, many plastics, ceramics
Mending – toys, appliances, lawn mowers, sports equipment etc
Sealing – leaks in gutters and downpipes
Patching – chipped concrete, floors, bricks, blocks etc
Attaching – fixtures, machine tags, signs etc
Anchoring – bolts, screws, housings etc
Moulding – to reform-reshape damaged timber, metal, masonry, plastics, ceramics
Moulding to rebuild – wrought iron fencing
Forming knobs and missing parts
Balancing – table legs etc
Fixing a damaged roof tile
Repairing a water (drinking) tank
Lost the head off your hammer? Make a new one with knead it
Replace chip in golf club (woods)
Not recommended for filling or sealing joints/cracks subject to movement as the cured product is extremely hard and inflexible
Does not adhere to polyethylene, polypropylene or Polytetrafluoroethylene (Teflon?) or silicone rubber
Pot life (working life) decreases above 20°C
Set time increases at temperatures below 20°C
Approval for Drinking Water Contact to AS/’NZ4020:2005 subject to a maximum surface area: volume ratio of 10,375mm2/L; minimum cure time: 72 hours at 20°C; maximum temperature: 85°C; maximum wet film thickness: 5 – 6mm
What materials is this product suitable for?
Wood/Timber
Concrete
Anchoring bolts
Metal
Masonry
Plastics
Ceramics
How to use this product
Clean surface free of grease, dirt and dust. For best results roughen bond area prior to cleaning.
Cut off required amount. Replace disc on the remaining portion. Use gloves to avoid messing hands. To mix, knead with fingers to a uniform colour. If mixing is difficult, warm to room temperature.
Apply to surface to be repaired (within 2 minutes of mixing) and mould to shape if required.
For a smooth appearance, remove excess and hand rub with water or a damp cloth before hardening begins.
Trim away any excess before initial hardening. Remove any residues with acetone prior to initial hardening. Hardened excess may be sanded or trimmed away once fully cured.
After 5-10 minutes Knead-It Multi-Purpose will harden and begin to form a strong bond.
After 60 minutes Knead-It Multi-Purpose may be drilled, sanded, machined, filed, sawed or painted.
Wash hands thoroughly with soap and water before product hardens.
Handy tips
Ensure the putty and hardener are mixed properly. Knead-It will become warm as it is mixed, A good indication its mixed properly is when you have a uniform colour and feel a mild heat radiating from the knead-it.
To help determine when your knead it has set, keep a small piece off to check- when it is hard, it indicates your job is done.
Use Knead-It Aqua for applications in wet/ submerged areas.
Use Knead-It Steel for applications on metal or fuel contact
For cleaning surfaces prior to application of adhesive, if the surface is porous, we would recommend using SELLEYS Liquid Sugar Soap. If the surface is non-porous eg glass or metal, firstly clean the surface with mineral turpentine and then again with methylated spirits. If there is old, difficult to remove residue such as old paint, we recommend using paint stripper such as SELLEYS Kwik Strip Smart. Ensure the surface is dry before applying the product
Keep a canister of SELLEYS Sugar Soap Wipes nearby for a quick and effective cleanup
Safety tips
Where possible wear protective gloves when using Knead-It Multi-Purpose. Contact with skin may result in irritation. Epoxy resin is a known skin sensitiser. Repeated or prolonged skin contact may lead to allergic contact dermatitis.
If redness or swelling of the skin occurs, wash thoroughly with soap and water. Seek medical attention if in any doubt.
Mixed and cured material is not hazardous. Cured material can only be removed by cutting and abrasion. If cured on the skin, it will peel off in a few days without assistance. Soaking in warm water will assist removal.
Storage and re-use
Replace silver disc to seal ends and keep in a cool dry place.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
A versatile, hand kneadable fast setting epoxy putty that is ideal for repairing, rebuilding, reshaping or restoring almost anything. It can be drilled, filed, machined, screwed, sawn, sanded and painted. Packaged in a handy roll so you can just cut off what you require and save the rest for another day, it hardens in 5-10 minutes, after mixing. Approved for contact with drinking water.
Features
Will not sag, run or drip
Easy to use – no mess
Can be drilled, sawed, sanded, filed, tapped, machined or painted one hour after mixing
Good adhesive strength
Can be used to reshape, rebuild and repair a multitude of surfaces and applications
Good gap filling properties
Long-lasting, durable solution
Heat resistant to 120°C continuously or 140°C intermittently
Can be used underwater. (but dry surfaces for application are best and recommended)
Rapid set time (<10 minutes)
Suitable for contact with drinking water. Complies with AS/NZS 4020, QAS Type Test Certificate No.: 8649
Excellent anchoring properties
Where can this product be used?
Repair and replacement – timber, metal, masonry, many plastics, ceramics
Mending – toys, appliances, lawn mowers, sports equipment etc
Sealing – leaks in gutters and downpipes
Patching – chipped concrete, floors, bricks, blocks etc
Attaching – fixtures, machine tags, signs etc
Anchoring – bolts, screws, housings etc
Moulding – to reform-reshape damaged timber, metal, masonry, plastics, ceramics
Moulding to rebuild – wrought iron fencing
Forming knobs and missing parts
Balancing – table legs etc
Fixing a damaged roof tile
Repairing a water (drinking) tank
Lost the head off your hammer? Make a new one with knead it
Replace chip in golf club (woods)
Not recommended for filling or sealing joints/cracks subject to movement as the cured product is extremely hard and inflexible
Does not adhere to polyethylene, polypropylene or Polytetrafluoroethylene (Teflon?) or silicone rubber
Pot life (working life) decreases above 20°C
Set time increases at temperatures below 20°C
Approval for Drinking Water Contact to AS/’NZ4020:2005 subject to a maximum surface area: volume ratio of 10,375mm2/L; minimum cure time: 72 hours at 20°C; maximum temperature: 85°C; maximum wet film thickness: 5 – 6mm
What materials is this product suitable for?
Wood/Timber
Concrete
Anchoring bolts
Metal
Masonry
Plastics
Ceramics
How to use this product
Clean surface free of grease, dirt and dust. For best results roughen bond area prior to cleaning.
Cut off required amount. Replace disc on the remaining portion. Use gloves to avoid messing hands. To mix, knead with fingers to a uniform colour. If mixing is difficult, warm to room temperature.
Apply to surface to be repaired (within 2 minutes of mixing) and mould to shape if required.
For a smooth appearance, remove excess and hand rub with water or a damp cloth before hardening begins.
Trim away any excess before initial hardening. Remove any residues with acetone prior to initial hardening. Hardened excess may be sanded or trimmed away once fully cured.
After 5-10 minutes Knead-It Multi-Purpose will harden and begin to form a strong bond.
After 60 minutes Knead-It Multi-Purpose may be drilled, sanded, machined, filed, sawed or painted.
Wash hands thoroughly with soap and water before product hardens.
Handy tips
Ensure the putty and hardener are mixed properly. Knead-It will become warm as it is mixed, A good indication its mixed properly is when you have a uniform colour and feel a mild heat radiating from the knead-it.
To help determine when your knead it has set, keep a small piece off to check- when it is hard, it indicates your job is done.
Use Knead-It Aqua for applications in wet/ submerged areas.
Use Knead-It Steel for applications on metal or fuel contact
For cleaning surfaces prior to application of adhesive, if the surface is porous, we would recommend using SELLEYS Liquid Sugar Soap. If the surface is non-porous eg glass or metal, firstly clean the surface with mineral turpentine and then again with methylated spirits. If there is old, difficult to remove residue such as old paint, we recommend using paint stripper such as SELLEYS Kwik Strip Smart. Ensure the surface is dry before applying the product
Keep a canister of SELLEYS Sugar Soap Wipes nearby for a quick and effective cleanup
Safety tips
Where possible wear protective gloves when using Knead-It Multi-Purpose. Contact with skin may result in irritation. Epoxy resin is a known skin sensitiser. Repeated or prolonged skin contact may lead to allergic contact dermatitis.
If redness or swelling of the skin occurs, wash thoroughly with soap and water. Seek medical attention if in any doubt.
Mixed and cured material is not hazardous. Cured material can only be removed by cutting and abrasion. If cured on the skin, it will peel off in a few days without assistance. Soaking in warm water will assist removal.
Storage and re-use
Replace silver disc to seal ends and keep in a cool dry place.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
A versatile hand kneadable, fast setting, non-rusting co-extruded epoxy repair system that can be used for repairing ferrous and aluminium metal items. It comes in a handy roll form, with the black hardener encapsulated in the grey resin part. The product hardens in 5-10 minutes, after mixing, to a black metal-like material.
Features
Will not sag, run or drip.
Easy to use – no mess.
Can be drilled, sawed, sanded, filed, tapped, machined or painted one hour after mixing.
Good adhesive strength.
Can be used to reshape, rebuild and repair a multitude of surfaces and applications.
Good gap filling properties.
Long-lasting, durable solution.
Heat resistant to 120°C continuously or 140°C intermittently.
Can be used under water (but dry surfaces for application are best and recommended).
Rapid Set (less than 10 minutes).
Can be used for fuel resistant repairs.
Appearance
Dries Dark Grey/Charcoal
Where can this product be used?
Rebuilding engine parts and rusted metal etc
Repairing a hole in a fuel tank
Repair of iron pipes, tools and equipment
Repair stripped threads
Forming of nuts and bolts in place
Attaching fixtures and signs
Fixing radiators
Repairing holes in cars and boats
Patching ducts and tanks
Making prototypes
Thread locking
Repair of down pipes and gutters
Anchoring of bolts
Repairing your metal outdoor furniture
Set time increases at temperatures below 20°C
Not recommended for plastic fuel tanks
Does not adhere to polyethylene, polypropylene or Polytetrafluoroethylene (Teflon?) or silicone rubber
Not tested for drinking water contact to AS/NZ 4020:2005
What materials is this product suitable for?
Steel
Wide range of terrous metal and aluminium items
Most plastics (pre-test required)
Glass
How to use this product
Clean surface free of grease, dirt and dust. For best results roughen bond area prior to cleaning
Cut off required amount. Replace disc on remaining portion. Use gloves to avoid messing hands. To mix, knead with fingers to uniform colour. If mixing is difficult, warm to room temperature. Apply with pressure to surface to be repaired (within 2 minutes of mixing) and mould to shape if required. If material sticks to fingers, use the plastic wrapper to press the material in place.
For a smooth appearance, remove excess and hand rub with water or a damp cloth before hardening begins.
Trim away any excess before initial hardening. Remove any residues with acetone prior to initial hardening. Hardened excess may be sanded or trimmed away once fully cured.
After 5-10 minutes Knead-It Steel will harden and begin to form a strong bond.
After 60 minutes Knead-It Steel may be drilled, sanded, machined, filed, sawed or painted.
Wash hands thoroughly with soap and water after use.
Handy tips
Ensure the putty and hardener are mixed properly. Knead-It will become warm as it is mixed, A good indication its mixed properly is when you have a uniform colour, and feel a mild heat radiating from thre knead-it.
To help determine when your knead it has set, keep a small piece off to check- when it is hard, it indicates your job is done.
Store in a cool place for maximum shelf life
Use Knead-It Multi Purpous for applications in contact with drinking water.
Use Knead-It Aqua for applications in wet/submerged areas.
For cleaning surfaces prior to application of adhesive, if the surface is porous, we would recommend using SELLEYS Liquid Sugar Soap. If the surface is non-porous eg glass or metal, firstly clean the surface with mineral turpentine and then again with methylated spirits. If there is old, difficult to remove residue such as old paint, we recommend using paint stripper such as SELLEYS Kwik Strip Smart. Ensure the surface is dry before applying the product.
Keep a canister of SELLEYS Sugar Soap Wipes nearby for a quick and effective cleanup.
Safety tips
Where possible wear protective gloves when using Knead-It Steel. Contact with skin may result in irritation. Epoxy resin is a known skin sensitiser. Repeated or prolonged skin contact may lead to allergic contact dermatitis.
If redness or swelling of skin occurs, wash thoroughly with soap and water. Seek medical attention if in any doubt.
Mixed and cured material is not hazardous. Cured material can only be removed by cutting and abrasion. If cured on skin, it will peel off in a few days without assistance. Soaking in warm water will assist removal.
Storage and re-use
Replace siliver disc to seal ends and keep in a cool dry place.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Selleys Kwik Grip High Temp Spray: Heat & Water Resistant Adhesive for Extreme Conditions
Bond Like a Pro: From Marine Carpets to Car Interiors
Presenting Selleys Kwik Grip High Temp Spray, a premium adhesive formulated to withstand extreme heat up to 90 degrees and resist salt water. Ideal for tasks requiring high-grade adhesion, from car headlining repairs to marine carpet installations.
Key Features:
Heat resistant up to 90 degrees
Water and salt water resistant
Fast drying
High grab
Applications Include:
Repairing headlining in cars
Adhering marine carpets in boats
Suitable Materials:
Wood
Metal
Aluminium
Fabric
Polyurethane foam
Laminate
Leather
Felt
Cork
How to Use:
Clean and dry the surface before application.
Shake the can well and hold it 20cm away from the surface. Spray both surfaces liberally.
Wait for up to 5-10 minutes for the adhesive to become touch dry.
Align and press the surfaces together, applying
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Selleys KwikGrip Spray 150g: The All-Purpose Adhesive for Absorbent & Non-Absorbent Surfaces
Adhesive Mastery: Quick, Clear & Heat Resistant
Discover the power of Selleys KwikGrip Spray 150g, a versatile adhesive spray that bonds instantly on contact. Ideal for both absorbent and non-absorbent surfaces, it offers a quick-drying and heat-resistant solution for a multitude of projects.
Key Features:
Versatile adhesive spray
Durable bond
Fast drying and dries clear
Heat resistance up to 70°C
Common Applications:
Car upholstery repairs
Fixing laminate on tables and bench tops
Patching vinyl flooring
Art and craft projects
And many more...
Compatible Materials:
Laminated plastics
Timber
Craft foam
Aluminium
Leather
Canvas
Rubber
Most plastics*
How to Use:
USE ONLY IN A WELL VENTILATED AREA. Shake the can well.
Ensure surfaces are clean and dry. Hold the can 20cm away and spray surfaces evenly.
For a permanent bond, spray both surfaces and wait until touch dry before pressing together. Clamp overnight for a firm bond.
For a temporary bond, spray one surface and press together while still tacky.
Limitations:
Not suitable for bonding rough, ill-fitting surfaces or certain plastics like polyethylene or polypropylene. Refer to the guidelines for alternative solutions.
Handy Tips:
After use, clean the nozzle by inverting the can and spraying until clear
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Selleys KwikGrip Spray 350g: The All-Purpose Adhesive for Absorbent & Non-Absorbent Surfaces
Adhesive Mastery: Quick, Clear & Heat Resistant
Discover the power of Selleys KwikGrip Spray 350g, a versatile adhesive spray that bonds instantly on contact. Ideal for both absorbent and non-absorbent surfaces, it offers a quick-drying and heat-resistant solution for a multitude of projects.
Key Features:
Versatile adhesive spray
Durable bond
Fast drying and dries clear
Heat resistance up to 70°C
Common Applications:
Car upholstery repairs
Fixing laminate on tables and bench tops
Patching vinyl flooring
Art and craft projects
And many more...
Compatible Materials:
Laminated plastics
Timber
Craft foam
Aluminium
Leather
Canvas
Rubber
Most plastics*
How to Use:
USE ONLY IN A WELL VENTILATED AREA. Shake the can well.
Ensure surfaces are clean and dry. Hold the can 20cm away and spray surfaces evenly.
For a permanent bond, spray both surfaces and wait until touch dry before pressing together. Clamp overnight for a firm bond.
For a temporary bond, spray one surface and press together while still tacky.
Limitations:
Not suitable for bonding rough, ill-fitting surfaces or certain plastics like polyethylene or polypropylene. Refer to the guidelines for alternative solutions.
Handy Tips:
After use, clean the nozzle by inverting the can and spraying until clear
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
SELLEYS LIQUID NAILS Original is a premium grade multi-purpose construction adhesive that delivers a consistently strong and lasting bond on most building materials. Shrinkage and thermal movement in buildings can cause bonds to weaken over time, but Liquid Nails is flexible enough to response to movement allowing a strong bond to be maintained over time.
Features
Strong bond – which will cope with shrinkage and thermal movement, so you know the job will last.
Adheres well to wet and dry timber, so there is no need to wait for the timber to dry.
Easily extruded and easy to use in low Winter temperatures, so it allows you to continue with the job at low temperatures.
Paintable when dry, to give you a neat, quality finished job.
Doesn’t drip, sag or string, so there is less mess when you are using the product.
Is available in a range of sizes and delivery styles.
Meets requirements specified by Australian Standard AS 2329-1999.
Bridges gaps on rough and ill fitting construction material
Has a life expectancy, when cured, of 20 years
Not for use on polyethylene, polypropylene, Teflon, silicone or polystyrene.
Perfect for use:
Sheet flooring to joists
Metal or aluminium door strips to floors or walls
Timber or fibre cement sheeting to cement block or brick walls
Masonite to timber
Wallboard or panelling to wood or metal frames
Cork tiles to timber, fibro or plaster
Tempered hardboard to floorboards
To eliminate the squeaks in tongue & groove boards
Not suitable for use on Mirrors, use Liquid Nails Mirrors, Metal and Glass
Not suitable for use on Styrene Foam, use Liquid Nails Fast
Not suitable for metals heated by direct sunlight, as bonds weaken at high temperatures. eg metal roofing and siding.
Not suitable for bonding materials in areas which will be constantly damp or wet.
Not suitable for use in tightly clamped joints eg cabinet making or joinery use Selleys Aquadhere
What materials is this product suitable for?
Brick & Concrete
Plasterboard, particleboard & fibre cement sheeting
Ceramic tiles
Aluminium
Painted surfaces
Timber
Hardboards
Render
Many other building surfaces
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Selleys Liquid Nails Exterior: The Builder's Choice for Durable Outdoor Bonds
Key Features
Adheres up to 3 tonnes per m² after just 4 hours on timber
Water, heat, and UV-resistant
Long-lasting bond that won't crack or go brittle
Fast and easy water clean-up
Compliant with Australian Standard AS 2329(1999) and Green Building Council VOC limits
Suitable Materials
This adhesive is ideal for the following materials:
Timber
Plasterboard
MDF
LOSP Treated Timber
Concrete
Masonry
Plastics (pre-test for compatibility)
Tiles
Glass
Ceramics
Directions for Use
Follow these simple steps for optimal performance:
Ensure surfaces are clean and free from grease or loose particles.
Cut cartridge tip, fit nozzle, and cut to 5mm opening.
Apply adhesive along the material's length or in beads on flat surfaces.
Press pieces firmly together, securing with fasteners or clamps.
Allow to set for a minimum of 4 hours before removing any temporary fasteners.
Limitations
Not suitable for use on PFTE, PE, or PP.
Cleaning & Safety
Clean up is easy with warm soapy water or a damp cloth for wet adhesive, and a scraper or sandpaper for dried adhesive.
Product Specifications
Available in 350g cartridges, in white color, and uses Self-crosslinking acrylic technology.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Liquid Nails Fast is a water-based, high-strength construction adhesive with fast grab and low odour. It has a thick, non-runny consistency and is ideal for adhering timbers and other porous construction materials. Once dry, it has a beige (light tan) finish.
Uses
Liquid Nails Fast has a high initial grab that reduces the need to support joins while the adhesive cures. The grab works best with porous surfaces. It bonds to a wide range of materials including MDF, particle board, timber, plasterboard, styrene foam, masonry, concrete, tiles, ceramics, metals, plastics*, rubber and glass. Faster results occur when at least one surface is porous.
Typical applications include:
Areas where nailing is not desirable
Skirting boards, architraves, and cornices
Wall panelling to masonry
Styrene foam to metal roofing
Technical Features
Fast grab – high initial holding reduces slippage on vertical surfaces
Complies with AS 2329-1999 (Mastic adhesives for fixing wall boards)
Non-drip formula – does not sag or string between panels
Bridges gaps and adheres to uneven surfaces
Low mess – excess can be wiped away with a damp cloth
No solvent fumes – ideal for indoor projects
Flexible – withstands thermal movement and vibration
Heat resistant – maintains bond strength under sunlight
Paintable when dry
Easy to extrude in all temperatures
Application Tips
Use in conjunction with permanent mechanical fasteners except for low-stress applications such as wall panelling or lightweight fixtures.
Bonds are not water resistant – protect from water if used outdoors.
Drying time is extended in cold or damp conditions and with non-porous materials.
Thicker layers take longer to dry.
Test plastics before use – adheres well to UPVC but not to polyethylene or polypropylene.
For wood flooring, use solvent-based Liquid Nails instead.
Satisfactory for fixing sheet flooring to joists with the manufacturer’s minimum nailing specification, but not recommended for bonding sheet flooring to existing or concrete floors.
Technical Details & Performance
Good bond strength after 24 hours on porous substrates; continues strengthening over 2–3 days.
Appearance: Smooth beige paste, free from lumps and air bubbles
Specific Gravity: Approx. 1.44 g/mL @ 25°C
Viscosity: 7000–9000 Poise
Slump: 0 mm (typical)
Shear Adhesion Strength (7 days, AS2329): >1500 kPa (Hoop pine substrate)
Peel Adhesion Strength (7 days cure): 40 N/25 mm (variant to AS2329)
Initial Bond Strength (24 hrs): >200 kPa
Heat Resistance: Withstands up to 140°C temporarily. Constant high temperatures may reduce load-holding power.
Creep Resistance (under constant load):
– At 80°C: holds 500 g (7.8 kPa) on 625 mm² bond area
– At 25°C: holds 6 kg (100 kPa) on 625 mm² bond area
Coverage
Approximately 15 metres of a 5 mm diameter bead. Curing time increases with thicker bonds or larger bond areas. Data provided is indicative only and not for design use.
Cleaning
Clean with hot soapy water or a damp cloth while wet. Once dry, remove by scraping or peeling.
*Always pre-test plastics for adhesion suitability.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Liquid Nails Fast is a water-based, high-strength construction adhesive with fast grab and low odour. It has a thick, non-runny consistency and is ideal for adhering timbers and other porous construction materials. Once dry, it has a beige (light tan) finish.
Uses
Liquid Nails Fast has a high initial grab that reduces the need to support joins while the adhesive cures. The grab works best with porous surfaces. It bonds to a wide range of materials including MDF, particle board, timber, plasterboard, styrene foam, masonry, concrete, tiles, ceramics, metals, plastics*, rubber and glass. Faster results occur when at least one surface is porous.
Typical applications include:
Areas where nailing is not desirable
Skirting boards, architraves, and cornices
Wall panelling to masonry
Styrene foam to metal roofing
Technical Features
Fast grab – high initial holding reduces slippage on vertical surfaces
Complies with AS 2329-1999 (Mastic adhesives for fixing wall boards)
Non-drip formula – does not sag or string between panels
Bridges gaps and adheres to uneven surfaces
Low mess – excess can be wiped away with a damp cloth
No solvent fumes – ideal for indoor projects
Flexible – withstands thermal movement and vibration
Heat resistant – maintains bond strength under sunlight
Paintable when dry
Easy to extrude in all temperatures
Application Tips
Use in conjunction with permanent mechanical fasteners except for low-stress applications such as wall panelling or lightweight fixtures.
Bonds are not water resistant – protect from water if used outdoors.
Drying time is extended in cold or damp conditions and with non-porous materials.
Thicker layers take longer to dry.
Test plastics before use – adheres well to UPVC but not to polyethylene or polypropylene.
For wood flooring, use solvent-based Liquid Nails instead.
Satisfactory for fixing sheet flooring to joists with the manufacturer’s minimum nailing specification, but not recommended for bonding sheet flooring to existing or concrete floors.
Technical Details & Performance
Good bond strength after 24 hours on porous substrates; continues strengthening over 2–3 days.
Appearance: Smooth beige paste, free from lumps and air bubbles
Specific Gravity: Approx. 1.44 g/mL @ 25°C
Viscosity: 7000–9000 Poise
Slump: 0 mm (typical)
Shear Adhesion Strength (7 days, AS2329): >1500 kPa (Hoop pine substrate)
Peel Adhesion Strength (7 days cure): 40 N/25 mm (variant to AS2329)
Initial Bond Strength (24 hrs): >200 kPa
Heat Resistance: Withstands up to 140°C temporarily. Constant high temperatures may reduce load-holding power.
Creep Resistance (under constant load):– At 80°C: holds 500 g (7.8 kPa) on 625 mm² bond area– At 25°C: holds 6 kg (100 kPa) on 625 mm² bond area
Coverage
Approximately 15 metres of a 5 mm diameter bead. Curing time increases with thicker bonds or larger bond areas. Data provided is indicative only and not for design use.
Cleaning
Clean with hot soapy water or a damp cloth while wet. Once dry, remove by scraping or peeling.
*Always pre-test plastics for adhesion suitability.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Liquid Nails Clear eliminates unsightly mess caused by conventional brown construction adhesives because it dries clear and blends with the surrounding surface. It is ideal where a fine finish is important.
Uses
Selleys Liquid Nails Clear is suitable for bonding to glass, fibreglass, metals, most plastics*, timber, particleboard, MDF, tiles & ceramics, concrete, painted and masonry substrates.
Suitable for bonding mouldings & trims, skirting boards & architraves, general fabrication and creating mosaics.
Pre-test plastics to determine compatibility.
Technical Features
High performance solvent based adhesive. Note: When use on glass to glass, thin film application is recommended for better clarity.
Good paintability – Paintable with water based paints. Oil based paints require undercoating with water based paints first.
Excellent resistance to water and weather makes it suitable for interior and exterior applications.
Application Tips
Due to solvent content Liquid Nails Clear should not be used in enclosed space or without ventilation
Solvents may affect some plastics
Will not bond polyolefin plastics such as polyethylene and polypropylene
May damage some polycarbonate, avoid smears and spills
Cannot be used on polystyrene foam
May not adhere to wet absorbent surfaces or to some old wet metals
In very cold weather cartridge must be conditioned to room temperature before use
Not recommended for permanent water immersion or water containment structures
Must be first painted with water based paint prior to painting with oil based paints
Will not accept common wood stains. (If staining is required, it is recommended to stain timber before bonding).
Full cure in 2 weeks
Not recommended for mirrors
Bonds weaken at high temperatures. Avoid bonding metals or heavy materials which will be heated by direct sun. (Consult Selleys about particular applications subject to heating).
Ensure that surfaces are free from dust, loose particles and dry. Cut cartridge tip, pierce membrane inside base of nub, fit nozzle and cut end to desired opening and fit cartridge into cartridge gun. In very cold weather, cartridge may need to be conditioned to room temperature for easier gunning.
Direct a bead along the length of the joist, stud or batten. On broad flat surfaces apply beads every 40cm. (“zig-zag” beads are more appropriate on surfaces of moderate width)
Fix with sufficient nails, screws or clamping to hold load and achieve contact over the total bond area. Wet bonds are re-positionable for up to 20 mins after fitting
Allow adhesives to set (at least 24 – 48 hours) before removing any temporary fasteners or clamping. (refer to Bond strength Time)
For faster grab, apply to one surface only, press together and pull apart. Allow surfaces to dry 2-3 minutes before firmly
Technical Details and Performance
Time for strong bond depends on nature and condition of application. A minimum of 24 to 48 hours is needed for sufficient strength to develop. The bond will continue to strengthen over time. Full cure up to 14 days.
Curing is achieved by evaporation of solvent. Time to achieve full strength is increased: at constant low temperatures; when thick applications (joints) are used; wide areas are bonded; when bonded surfaces are impervious (e.g. metals and glass).
Indicative information only, not to be used for setting specifications.
Appearance
Clear soft adhesive
Viscosity
5000 – 9000P TE/2 @ 25oC
HAF/HELIPATH
Skin Time / Tack Free Time
5 min. @ 25oC
Specific Gravity
0.87g/mL
Extrudability
100g/min. @ 25oC (at 628kPa pressure through 3mm orifice)
Solid Content
60%
Cure
By evaporation of solvent
Water Based Paints
Good
Alkyd Paints
Good, after first undercoating with a water based paint
Flammability
Uncured adhesive- flammable Cured adhesive – will burn if ignited
Service Temperature
Maximum 80oC
Coverage
15 metres of a 5mm diameter bead
Cleaning
Clean off wet adhesive with mineral turps or white spirit. Dry adhesive can be removed by scraping or sanding.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
A premium grade, high strength construction adhesive that delivers a weather resistant, strong, flexible and shock resistance bond that is useful in many landscaping projects.
Uses
Ideal for landscape jobs such as:
Stabilise stone and interlocking masonry retaining walls
Bonding pavers to concrete
Bonding capstones to wall
Repairing rockeries
Seal between treated pine logs to reduce soil loss
Stabilise loose stone steps
Technical Features
Strengthens and increases the life of dry stone and interlocking masonry walls
High flexibility to withstand seasonal movement and temperature extremes
Excellent adhesion to sound concrete and similar materials
UV resistant and long lasting in all weather extremes
Low odour during application
Non corrosive
Gap filling
Application Tips
Cannot be painted over
Not recommended for permanent water immersion applications
If re-positioning materials, fresh adhesive must be applied to achieve bonding
Not suitable for adhering loose soft crumbly materials
New concrete etc will not adhere to cured adhesive
All surfaces must be sound, dry and free from oil, grease, loose powdery material.
If necessary, use mineral turpentine to clean surface and allow to dry.
Cut cartridge tip, fit nozzle and cut nozzle tip to a suitable size opening (approximately 5mm).
Place cartridge into caulking gun.
Apply ‘dobs’ or ‘beads’ of adhesive of appropriate thickness to ensure sufficient contact and spread between both surfaces. (To minimise ‘squeezed out’ apply at least 12mm in from edges)
Immediately bring surfaces together before product skins (within 5 minutes) and apply sufficient pressure to spread between both surfaces
Do not wipe ‘squeeze out’. Wait until product cures and remove by trimming with a sharp blade, but avoid cutting into the bond.
Leave bond undisturbed until adhesive cures sufficiently. Do not allow traffic on stairs or use of walls for at least 24 hours after adhesive application.
Do not apply to wet/damp surfaces
Technical Details and Performance
Liquid Nails Landscape will skin and begin curing within 5 minutes. Full cure will normally be achieved in 72 hours.
Indicative information only, not to be used for setting specifications.
Consistency (As applied)
Non-slump, solvent free paste
Curing Mechanism
Very rapidly develops rubber consistency by reaction with moisture from the air
Curing Rate
2mm depth per day
Skin Forming Time
10-15 minutes (depending on weather conditions)
Service Temperature
–60°C to +150°C
Lap Shear Bond Strength (Hoop Pine to Hoop Pine at 1.6mm thick adhesive, 500sq mm bond area)
After 7 days: 570KPa
Coverage
15 metres of a 5mm diameter bead
Cleaning
Clean all excess adhesive from equipment before it cures with a cloth dampened with mineral turpentine or acetone. Once cured adhesive is extremely difficult to remove and must be abraded or trimmed with a knife. Spilt of smeared adhesive is best left to cure and then removed by abrasion.
![Selleys Armour Flex High Performance Adhesive [Grey]](//gluesaustralia.com.au/cdn/shop/files/9300697125279_ca037dae-5a32-46a8-b3b3-d4b80d5f85fd.jpg?v=1754711933&width=645)
![Selleys Flexiseal Multipurpose Sealant Polyurethane 310ml [Black]](//gluesaustralia.com.au/cdn/shop/files/81e21d7d520d41a280976d39a403b5c9.jpg?v=1757753238&width=645)
![Selleys Flexiseal Multipurpose Sealant Polyurethane 310ml [Grey]](//gluesaustralia.com.au/cdn/shop/files/51345fd2ddf64a74a03e2c6b9e0d7e1a.jpg?v=1757753232&width=645)
![Selleys Armour Flex High Performance Adhesive [Grey]](http://gluesaustralia.com.au/cdn/shop/files/9300697125279_ca037dae-5a32-46a8-b3b3-d4b80d5f85fd.jpg?v=1754711933&width=645)
![Selleys Flexiseal Multipurpose Sealant Polyurethane 310ml [Black]](http://gluesaustralia.com.au/cdn/shop/files/81e21d7d520d41a280976d39a403b5c9.jpg?v=1757753238&width=645)
![Selleys Flexiseal Multipurpose Sealant Polyurethane 310ml [Grey]](http://gluesaustralia.com.au/cdn/shop/files/51345fd2ddf64a74a03e2c6b9e0d7e1a.jpg?v=1757753232&width=645)
