In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
SELLEYS LIQUID NAILS Original is a premium grade multi-purpose construction adhesive that delivers a consistently strong and lasting bond on most building materials. Shrinkage and thermal movement in buildings can cause bonds to weaken over time, but Liquid Nails is flexible enough to response to movement allowing a strong bond to be maintained over time.
Features
Strong bond – which will cope with shrinkage and thermal movement, so you know the job will last.
Adheres well to wet and dry timber, so there is no need to wait for the timber to dry.
Easily extruded and easy to use in low Winter temperatures, so it allows you to continue with the job at low temperatures.
Paintable when dry, to give you a neat, quality finished job.
Doesn’t drip, sag or string, so there is less mess when you are using the product.
Is available in a range of sizes and delivery styles.
Meets requirements specified by Australian Standard AS 2329-1999.
Bridges gaps on rough and ill fitting construction material
Has a life expectancy, when cured, of 20 years
Not for use on polyethylene, polypropylene, Teflon, silicone or polystyrene.
Perfect for use:
Sheet flooring to joists
Metal or aluminium door strips to floors or walls
Timber or fibre cement sheeting to cement block or brick walls
Masonite to timber
Wallboard or panelling to wood or metal frames
Cork tiles to timber, fibro or plaster
Tempered hardboard to floorboards
To eliminate the squeaks in tongue & groove boards
Not suitable for use on Mirrors, use Liquid Nails Mirrors, Metal and Glass
Not suitable for use on Styrene Foam, use Liquid Nails Fast
Not suitable for metals heated by direct sunlight, as bonds weaken at high temperatures. eg metal roofing and siding.
Not suitable for bonding materials in areas which will be constantly damp or wet.
Not suitable for use in tightly clamped joints eg cabinet making or joinery use Selleys Aquadhere
What materials is this product suitable for?
Brick & Concrete
Plasterboard, particleboard & fibre cement sheeting
Ceramic tiles
Aluminium
Painted surfaces
Timber
Hardboards
Render
Many other building surfaces
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Selleys Marine Flex is a high-performance adhesive and sealant designed for marine and water-exposed applications. Using Sil-X advanced polymer technology, it provides a permanent watertight seal above and below the waterline, even in salt, fresh, or chlorinated water.
Key Features
Cures and bonds underwater
No primer required for most surfaces
Strong and flexible bond absorbs vibration and movement
Solvent-free and isocyanate-free formulation
Sandable once cured
10-year watertight seal guarantee (above waterline)
Where to Use
Ideal for marine, pool, spa, and construction projects where water exposure or movement is expected. Suitable for bonding and sealing:
Boat hulls, fittings, and deck seams
Pool tiles, coping, and skimmer boxes
Concrete, fibreglass, sealed timber, and metal surfaces
Glass, ceramics, and most rigid plastics
Technical Details
Technology
Sil-X advanced polymer
Colour
White or Black
Size
410g cartridge
Finish
Smooth, paintable once cured
How to Apply
Ensure surfaces are clean and free from grease, oil, or dust. Can be applied to damp or wet surfaces.
Cut the nozzle to the desired bead size and apply using a standard caulking gun.
Tool the sealant immediately with a soapy water solution before it begins to skin.
Allow to cure fully before sanding or painting if required.
Limitations
Not suitable for polyethylene (PE), polypropylene (PP), or PTFE materials
Gelcoat surfaces should be lightly sanded before application
The watertight guarantee applies to applications above the waterline
Why Choose Selleys Marine Flex
When you need a sealant that can withstand constant water exposure, movement, and vibration, Selleys Marine Flex delivers unmatched reliability. It bonds powerfully, stays flexible, and ensures a lasting waterproof finish for marine, pool, or construction applications.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Selleys Marine Flex is a high-performance adhesive and sealant designed for marine and water-exposed applications. Using Sil-X advanced polymer technology, it provides a permanent watertight seal above and below the waterline, even in salt, fresh, or chlorinated water.
Key Features
Cures and bonds underwater
No primer required for most surfaces
Strong and flexible bond absorbs vibration and movement
Solvent-free and isocyanate-free formulation
Sandable once cured
10-year watertight seal guarantee (above waterline)
Where to Use
Ideal for marine, pool, spa, and construction projects where water exposure or movement is expected. Suitable for bonding and sealing:
Boat hulls, fittings, and deck seams
Pool tiles, coping, and skimmer boxes
Concrete, fibreglass, sealed timber, and metal surfaces
Glass, ceramics, and most rigid plastics
Technical Details
Technology
Sil-X advanced polymer
Colour
White or Black
Size
410g cartridge
Finish
Smooth, paintable once cured
How to Apply
Ensure surfaces are clean and free from grease, oil, or dust. Can be applied to damp or wet surfaces.
Cut the nozzle to the desired bead size and apply using a standard caulking gun.
Tool the sealant immediately with a soapy water solution before it begins to skin.
Allow to cure fully before sanding or painting if required.
Limitations
Not suitable for polyethylene (PE), polypropylene (PP), or PTFE materials
Gelcoat surfaces should be lightly sanded before application
The watertight guarantee applies to applications above the waterline
Why Choose Selleys Marine Flex
When you need a sealant that can withstand constant water exposure, movement, and vibration, Selleys Marine Flex delivers unmatched reliability. It bonds powerfully, stays flexible, and ensures a lasting waterproof finish for marine, pool, or construction applications.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
A premium grade high strength construction adhesive that delivers a consistently strong bond on mirror, metal and glass material.
Uses
Ideal for adhering mirrors to walls, metal letterboxes to exterior walls, house numbers to exterior walls, bathroom fixtures to tiles, tool holders on metal shed walls etc.
Liquid Nails Mirror, Metal, Glass is also suitable for use on BHP decorative sheet metals such as Lysaght, Zincalume, Colorbond®, Marviplate®, galvanised metals, Alcan and Comalco aluminium systems.
Technical Features
Will not discolour mirrors
Heat and steam resistance
Adheres metal, glass and mirror well to most surfaces including painted surfaces but not wall coverings
Adheres and forms a durable seal between sheet metals
Gap filling on uneven surfaces
Forms flexible/shock resistant bonds
UV resistant
Low odour during application
Non corrosive
Weather resistant
Application Tips
All surfaces must be clean, dry and free from dirt dust, oil and loose rust. Clean surfaces with mineral turpentine and wipe dry with a clean rag before applying. Painted surfaces should not be flaky or peeling.
Cut tip off cartridge and cut nozzle to suitable size opening (approximately 5mm).
Fit nozzle to cartridge. Place cartridge into caulking gun.
Support bond until adhesive cures sufficiently (at least 48 hours adhesive cures at 2mm depth per day).
APPLICATION FOR MIRRORS
For mirrors up to 6mm thick, apply strips of adhesive 5cm from edges and approx 8cm apart
When mirror is pressed onto the wall, strips of adhesive must not spread into, or touch one another. A gap must remain between them.
Immediately after applying adhesive, place mirror against wall before adhesive skins (within 5 minutes)
The weight must be supported and mirror must be held in place with temporary supports (e.g. with clips or tape) to hold and maintain adhesive contact over the total bond area until sufficient adhesive strength has developed. Normally after 72 hours.
Do not seal around the edges of the mirror for at least a week to allow air circulation and aid the adhesive fully cure
Mirrors should not be fixed directly to unpainted plaster, timber, concrete or brick walls. These surfaces should be painted to prevent potential damage to mirror. Painted surfaces should not be flaking or peeling.
Not recommended for fixing vinyl back mirrors
If in doubt, conduct an adhesion test by curing a little adhesive onto mirror backing for 24 hours. If adhesive can be peeled off, do not proceed.
GENERAL APPLICATION
Apply as for mirrors and press surfaces together immediately
Leave ‘squeeze out ‘ to cure and trim (avoid cutting into the bond)
Support bond until adhesive cures sufficiently (normally after 72hrs). Adhesive cures at 2mm depth per day.
Technical Details and Performance
Indicative information only, not to be used for setting specifications.
Consistency (As applied)
Non-slump, solvent free paste
Curing Mechanism
Very rapidly develops an adhesive bond by reaction with moisture from the air
Curing Rate
2mm depth per day
Skin Forming Time
5-10 minutes (depending on weather conditions)
Service Temperature
–60°C to +150°C
Lap Shear Bond Strength (Aluminium to Aluminium at 1.6mm thick adhesive, 500sq mm bond area)
After 24 hrs: 280KPa
After 48 hrs: 550KPa
After 7 days: 830KPa
Coverage
15 metres of a 5mm diameter bead
Cleaning
Clean all excess adhesive from equipment before it cures with a cloth dampened with mineral turpentine or acetone. Once cured adhesive is extremely difficult to remove and must be abraded or trimmed with a knife
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Selleys N Mastic is a non-hardening, waterproof sealing putty designed for a wide range of applications where long-lasting flexibility is crucial. Ideal for sealing joints, gaps around windows, and roofing, it ensures that structures remain protected from water ingress. The unique formula remains pliable, making it perfect for environments where movement and expansion are expected.
Whether you're sealing an outdoor roof gutter, securing window frames, or filling gaps in an air conditioning system, Selleys N Mastic provides a professional-grade finish with no cracking or crumbling. The product is also suitable for metal, glass, concrete, and brick, making it a versatile solution for residential, commercial, and industrial projects.
N-Mastic is a non-skinning polybutene-based compound. It will remain permanently soft and paste-like.
Uses
N-Mastic is suitable for sealing concealed lap joints between plastics, metals, timber, glass, masonry, and expanded foam panels.
It may be used in the installation of cool rooms, prefabricated construction and gasket sealed windscreens to exclude draughts and water penetration through joints in materials.
Technical Features
Non-hardening – remains permanently flexible to provide a lasting seal
Good adhesion – adheres well to most substrates
Moisture resistance – provides an excellent barrier to moisture vapour
Microbe resistance – resists microbial attack
Low shrinkage – avoids the risk of sealant pulling away from joint surfaces
Wide service temperatures – withstands –40oC to +80oC service conditions
Application Tips
Due to the non-skinning, non-hardening nature of the sealant, N-Mastic should not be used in exposed joints where dirt pick-up or hand contact can be a problem.
As N-Mastic is not elastomeric, it should not be used in areas subject to considerable dynamic stress.
Although N-Mastic is resistant to static pressures, a curing sealant is recommended where this is a critical factor.
N-Mastic is not recommended for sealing lap joints in mobile homes, truck bodies, etc., as significant vibration and flexing occur during travel.
Technical Details and Performance
Indicative information only, not to be used for setting specifications.
Colour
Off White
Specific Gravity
1.4g/mL
Consistency
Non-sag
Slump (MIL-S-8802, @ 32oC )
2.5mm maximum
Viscosity (Brookfield HAF 7/2 @ 25oC )
10,000 – 14,000 Poise
Flash Point
85oC
Storage Life (25oC )
Indefinite
Packaging
Plastic cartridge (410g)
Performance Properties
Shrinkage (% maximum) 5
Service Temperature
–40oC to +80oC
Life Expectancy
Up to 20 years
Clean Up
Sealant may be removed with a cloth dampened with kerosene or mineral spirits
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Selleys No More Gaps Bathroom & Kitchen is a flexible gap filler with superior water and mould resistance for bathroom and kitchen surfaces. Also available in easy tube format.
Features
Superior water resistance.
Superior flexibility to cope with building movement, meaning the cracks and gaps will be hidden for longer. Up to +/- 25% movement capability.
Optimum adhesion is achieved on ceramics, glass, aluminium, most plastic and cement.
Mould resistant-contains a fungicide to help protect against unsightly mould growth.
Can be painted over with both water and oil based paints
Easy water clean-up
Low odour
Where can this product be used?
Bathroom vanities
Bathroom cabinets
In and around glass and tiles
Cabinets
Architraves
Skirting boards
Bench tops
Windows
Door frames
What materials is this product suitable for?
Ceramics
Glass
Aluminium
Most Plastics
Cement Sheeting
Wood
Plasterboard
Many other building surfaces
How to Use
Ensure the surface is clean and free from dust, grease, flaking/powdery paint and old or crumbling caulk.
Cut seal and nozzle and fit to cartridge. Insert into a quality caulking gun, such as Selleys Light Speed caulking gun.
Apply with caulking gun, forcing product into gap
Smooth with a wet spatula.
Clean up with a damp cloth immediately, before filler skins in approx. 10-15 minutes.
Allow surfaces to skin prior to painting (approximately 1 hour). Skin time will be extended in cold or humid conditions, or if painting with flat or ceiling paints (approximately 3 hours)
To allow product to strengthen, protect from water for 24 hours.
Limitations:
Should not be used in permanently damp locations. Use Selleys® Wet Area Silicone Sealant around sinks, baths and shower recesses.
Not recommended for prolonged contact with water.
Handy Tips
Ensure you tape both sides of the gap before applying the product. This ensures a neat finish and makes it easier to clean up.
When first applying product, extrude a small amount onto a piece of scrap material to ensure a smooth continuous flow of gap filler.
Remove the tape before the gap filler skins.
If you are going to wipe off the excess gap filler with a wet finger, ensure you wet your finger with water and not saliva, as saliva contains bacteria and this will increase the chances of mould growing in your gap filler. It is best to use a spatula dipped in soapy water.
Clean off all excess No More Gaps Bathroom & Kitchen from equipment immediately before it cures with a damp cloth. Once cured, No More Gaps Bathroom & Kitchen is extremely difficult to remove and must be trimmed with a knife.
Keep a pack of Selleys Sugar Soap Wipes handy to wipe up any spills and for cleaning. They are an easy and effective way to keep clean on the job.
To avoid paint cracking, apply at temperatures above 5°C and do not apply paint too thick.
Allow longer drying times before painting with flat or ceiling paints and in cooler weather.
Can be applied to damp surfaces however product must be allowed to dry following application.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Selleys No More Gaps Bricks and Mortar is a textured, ready to use weather-resistant gap filler available in a range of colours to match your existing mortar. It's mortar like texture allows easy repair of unsightly cracks and gaps in brickwork around the home.
Features
Ready mixed mortar filler, so is quick and easy to apply with a caulking gun.
Has a mortar like texture for a textured finish and match to cement mortar and render.
Is more flexible than mortar which will help prevent more damage to the mortar
Is weather and UV resistant with a UV stable formula to prevent colour deterioration.
Provides a more suitable finish on rendered walls than smooth fillers.
Contains a fungicide and algaecide to protect against unsightly mould and algae growth.
Has superior adhesion to a broad range of surfaces, making it easy to use.
Will not stain building materials
Can be painted over with both water and oil based paints, after the surface has skinned. (Approximately 2 hours after application).
Is water based, so can be cleaned up with water easily.
Is sandable when dry for a rough or smooth finish.
Where can this product be used?
Repairing cracks and gaps in brickwork and/or cement blocks where mortar has fallen out or eroded.
Stationary cracks in pathways.
Sealing gaps around windows or between brick wall and roof eaves.
Repairing stationary cracks in cement render.
Repairing penetration holes around pipe work, ducting, etc.
Sealing gaps where mortar has fallen out in ridge capping on tile roofs.
What materials is this product suitable for?
Brick
Concrete
Render
Fibre cement sheeting
Laminated plastics
Hardboards
Aluminium
Ceramics
Timber
How to Use
Ensure the surface is clean, dry and free from dust, grease, flaking/powdery paint and old or crumbling caulk.
Cut cartridge tip, fit nozzle and cut to desired opening (5mm) then insert into caulking gun. We recommend Selleys Light Speed Caulking Gun. Apply using caulking gun.
Apply with caulking gun, forcing product into gap. Press into cracks and holes using a spatula or wet finger.
Clean away excess from surfaces immediately using a damp cloth.
For larger cracks & holes, 2 applications may be necessary. Allow first application to dry before applying second. Hardens in 24 hours depending on weather.
Protect from rain until firmly skinned.
Limitations:
Not suitable for areas of continuous water immersion.
Not suitable as a substitute for mortar in construction as it does not have the structural properties of mortar.
Not suitable for moving cracks.
Do not use or store below 5°C.
Handy Tips
For the best results slightly dampen the surface prior to application.
For use in fine cracks, eg. in cement render rub Selleys No More Gaps Bricks and Mortar into cracks or use Selleys No More Cracks Exterior & Brick Render.
If painting over the product, apply undercoat before applying a top coat for the best results.
Keep a pack of Selleys Sugar Soap Wipes handy to wipe up any spills and for cleaning. They are an easy and effective way to keep clean on the job.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Selleys No More Gaps Bricks and Mortar is a textured, ready to use weather-resistant gap filler available in a range of colours to match your existing mortar. It's mortar like texture allows easy repair of unsightly cracks and gaps in brickwork around the home.
Features
Ready mixed mortar filler, so is quick and easy to apply with a caulking gun.
Has a mortar like texture for a textured finish and match to cement mortar and render.
Is more flexible than mortar which will help prevent more damage to the mortar
Is weather and UV resistant with a UV stable formula to prevent colour deterioration.
Provides a more suitable finish on rendered walls than smooth fillers.
Contains a fungicide and algaecide to protect against unsightly mould and algae growth.
Has superior adhesion to a broad range of surfaces, making it easy to use.
Will not stain building materials
Can be painted over with both water and oil based paints, after the surface has skinned. (Approximately 2 hours after application).
Is water based, so can be cleaned up with water easily.
Is sandable when dry for a rough or smooth finish.
Where can this product be used?
Repairing cracks and gaps in brickwork and/or cement blocks where mortar has fallen out or eroded.
Stationary cracks in pathways.
Sealing gaps around windows or between brick wall and roof eaves.
Repairing stationary cracks in cement render.
Repairing penetration holes around pipe work, ducting, etc.
Sealing gaps where mortar has fallen out in ridge capping on tile roofs.
What materials is this product suitable for?
Brick
Concrete
Render
Fibre cement sheeting
Laminated plastics
Hardboards
Aluminium
Ceramics
Timber
How to Use
Ensure the surface is clean, dry and free from dust, grease, flaking/powdery paint and old or crumbling caulk.
Cut cartridge tip, fit nozzle and cut to desired opening (5mm) then insert into caulking gun. We recommend Selleys Light Speed Caulking Gun. Apply using caulking gun.
Apply with caulking gun, forcing product into gap. Press into cracks and holes using a spatula or wet finger.
Clean away excess from surfaces immediately using a damp cloth.
For larger cracks & holes, 2 applications may be necessary. Allow first application to dry before applying second. Hardens in 24 hours depending on weather.
Protect from rain until firmly skinned.
Limitations:
Not suitable for areas of continuous water immersion.
Not suitable as a substitute for mortar in construction as it does not have the structural properties of mortar.
Not suitable for moving cracks.
Do not use or store below 5°C.
Handy Tips
For the best results slightly dampen the surface prior to application.
For use in fine cracks, eg. in cement render rub Selleys No More Gaps Bricks and Mortar into cracks or use Selleys No More Cracks Exterior & Brick Render.
If painting over the product, apply undercoat before applying a top coat for the best results.
Keep a pack of Selleys Sugar Soap Wipes handy to wipe up any spills and for cleaning. They are an easy and effective way to keep clean on the job.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Selleys No More Gaps Bricks and Mortar is a textured, ready to use weather-resistant gap filler available in a range of colours to match your existing mortar. It's mortar like texture allows easy repair of unsightly cracks and gaps in brickwork around the home.
Features
Ready mixed mortar filler, so is quick and easy to apply with a caulking gun.
Has a mortar like texture for a textured finish and match to cement mortar and render.
Is more flexible than mortar which will help prevent more damage to the mortar
Is weather and UV resistant with a UV stable formula to prevent colour deterioration.
Provides a more suitable finish on rendered walls than smooth fillers.
Contains a fungicide and algaecide to protect against unsightly mould and algae growth.
Has superior adhesion to a broad range of surfaces, making it easy to use.
Will not stain building materials
Can be painted over with both water and oil based paints, after the surface has skinned. (Approximately 2 hours after application).
Is water based, so can be cleaned up with water easily.
Is sandable when dry for a rough or smooth finish.
Where can this product be used?
Repairing cracks and gaps in brickwork and/or cement blocks where mortar has fallen out or eroded.
Stationary cracks in pathways.
Sealing gaps around windows or between brick wall and roof eaves.
Repairing stationary cracks in cement render.
Repairing penetration holes around pipe work, ducting, etc.
Sealing gaps where mortar has fallen out in ridge capping on tile roofs.
What materials is this product suitable for?
Brick
Concrete
Render
Fibre cement sheeting
Laminated plastics
Hardboards
Aluminium
Ceramics
Timber
How to Use
Ensure the surface is clean, dry and free from dust, grease, flaking/powdery paint and old or crumbling caulk.
Cut cartridge tip, fit nozzle and cut to desired opening (5mm) then insert into caulking gun. We recommend Selleys Light Speed Caulking Gun. Apply using caulking gun.
Apply with caulking gun, forcing product into gap. Press into cracks and holes using a spatula or wet finger.
Clean away excess from surfaces immediately using a damp cloth.
For larger cracks & holes, 2 applications may be necessary. Allow first application to dry before applying second. Hardens in 24 hours depending on weather.
Protect from rain until firmly skinned.
Limitations:
Not suitable for areas of continuous water immersion.
Not suitable as a substitute for mortar in construction as it does not have the structural properties of mortar.
Not suitable for moving cracks.
Do not use or store below 5°C.
Handy Tips
For the best results slightly dampen the surface prior to application.
For use in fine cracks, eg. in cement render rub Selleys No More Gaps Bricks and Mortar into cracks or use Selleys No More Cracks Exterior & Brick Render.
If painting over the product, apply undercoat before applying a top coat for the best results.
Keep a pack of Selleys Sugar Soap Wipes handy to wipe up any spills and for cleaning. They are an easy and effective way to keep clean on the job.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Selleys No More Gaps Bricks and Mortar is a textured, ready to use weather-resistant gap filler available in a range of colours to match your existing mortar. It's mortar like texture allows easy repair of unsightly cracks and gaps in brickwork around the home.
Features
Ready mixed mortar filler, so is quick and easy to apply with a caulking gun.
Has a mortar like texture for a textured finish and match to cement mortar and render.
Is more flexible than mortar which will help prevent more damage to the mortar
Is weather and UV resistant with a UV stable formula to prevent colour deterioration.
Provides a more suitable finish on rendered walls than smooth fillers.
Contains a fungicide and algaecide to protect against unsightly mould and algae growth.
Has superior adhesion to a broad range of surfaces, making it easy to use.
Will not stain building materials
Can be painted over with both water and oil based paints, after the surface has skinned. (Approximately 2 hours after application).
Is water based, so can be cleaned up with water easily.
Is sandable when dry for a rough or smooth finish.
Where can this product be used?
Repairing cracks and gaps in brickwork and/or cement blocks where mortar has fallen out or eroded.
Stationary cracks in pathways.
Sealing gaps around windows or between brick wall and roof eaves.
Repairing stationary cracks in cement render.
Repairing penetration holes around pipe work, ducting, etc.
Sealing gaps where mortar has fallen out in ridge capping on tile roofs.
What materials is this product suitable for?
Brick
Concrete
Render
Fibre cement sheeting
Laminated plastics
Hardboards
Aluminium
Ceramics
Timber
How to Use
Ensure the surface is clean, dry and free from dust, grease, flaking/powdery paint and old or crumbling caulk.
Cut cartridge tip, fit nozzle and cut to desired opening (5mm) then insert into caulking gun. We recommend Selleys Light Speed Caulking Gun. Apply using caulking gun.
Apply with caulking gun, forcing product into gap. Press into cracks and holes using a spatula or wet finger.
Clean away excess from surfaces immediately using a damp cloth.
For larger cracks & holes, 2 applications may be necessary. Allow first application to dry before applying second. Hardens in 24 hours depending on weather.
Protect from rain until firmly skinned.
Limitations:
Not suitable for areas of continuous water immersion.
Not suitable as a substitute for mortar in construction as it does not have the structural properties of mortar.
Not suitable for moving cracks.
Do not use or store below 5°C.
Handy Tips
For the best results slightly dampen the surface prior to application.
For use in fine cracks, eg. in cement render rub Selleys No More Gaps Bricks and Mortar into cracks or use Selleys No More Cracks Exterior & Brick Render.
If painting over the product, apply undercoat before applying a top coat for the best results.
Keep a pack of Selleys Sugar Soap Wipes handy to wipe up any spills and for cleaning. They are an easy and effective way to keep clean on the job.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Selleys No More Gaps Bricks and Mortar is a textured, ready to use weather-resistant gap filler available in a range of colours to match your existing mortar. It's mortar like texture allows easy repair of unsightly cracks and gaps in brickwork around the home.
Features
Ready mixed mortar filler, so is quick and easy to apply with a caulking gun.
Has a mortar like texture for a textured finish and match to cement mortar and render.
Is more flexible than mortar which will help prevent more damage to the mortar
Is weather and UV resistant with a UV stable formula to prevent colour deterioration.
Provides a more suitable finish on rendered walls than smooth fillers.
Contains a fungicide and algaecide to protect against unsightly mould and algae growth.
Has superior adhesion to a broad range of surfaces, making it easy to use.
Will not stain building materials
Can be painted over with both water and oil based paints, after the surface has skinned. (Approximately 2 hours after application).
Is water based, so can be cleaned up with water easily.
Is sandable when dry for a rough or smooth finish.
Where can this product be used?
Repairing cracks and gaps in brickwork and/or cement blocks where mortar has fallen out or eroded.
Stationary cracks in pathways.
Sealing gaps around windows or between brick wall and roof eaves.
Repairing stationary cracks in cement render.
Repairing penetration holes around pipe work, ducting, etc.
Sealing gaps where mortar has fallen out in ridge capping on tile roofs.
What materials is this product suitable for?
Brick
Concrete
Render
Fibre cement sheeting
Laminated plastics
Hardboards
Aluminium
Ceramics
Timber
How to Use
Ensure the surface is clean, dry and free from dust, grease, flaking/powdery paint and old or crumbling caulk.
Cut cartridge tip, fit nozzle and cut to desired opening (5mm) then insert into caulking gun. We recommend Selleys Light Speed Caulking Gun. Apply using caulking gun.
Apply with caulking gun, forcing product into gap. Press into cracks and holes using a spatula or wet finger.
Clean away excess from surfaces immediately using a damp cloth.
For larger cracks & holes, 2 applications may be necessary. Allow first application to dry before applying second. Hardens in 24 hours depending on weather.
Protect from rain until firmly skinned.
Limitations:
Not suitable for areas of continuous water immersion.
Not suitable as a substitute for mortar in construction as it does not have the structural properties of mortar.
Not suitable for moving cracks.
Do not use or store below 5°C.
Handy Tips
For the best results slightly dampen the surface prior to application.
For use in fine cracks, eg. in cement render rub Selleys No More Gaps Bricks and Mortar into cracks or use Selleys No More Cracks Exterior & Brick Render.
If painting over the product, apply undercoat before applying a top coat for the best results.
Keep a pack of Selleys Sugar Soap Wipes handy to wipe up any spills and for cleaning. They are an easy and effective way to keep clean on the job.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
No More Gaps Coloured Gaps
No More Gaps Coloured Gaps offers a long-lasting, colour-matched finish, suitable for both interior and exterior use. It comes in a wide range of colours, with no need to paint over (although it is paintable if required). It provides superior flexibility to cope with building movement, hiding cracks and gaps longer, with greater than 350% elongation/stretch and up to +/- 20% movement capability.
Key Features
Long-lasting, colour-matched finish
Suitable for Interior & Exterior use
Available in a great colour range, with no need to paint over (Paintable if required)
Superior flexibility to cope with building movement, hiding cracks and gaps longer
Greater than 350% elongation/stretch and up to +/- 20% movement capability
Good resistance to weathering
Superior adhesion to a broad range of surfaces, resulting in a lasting finish
Mould and mildew resistant
Where can this product be used?
Between window and door frames and the wall
Along skirting boards
Around cornices
Between benchtops and tiles (not exposed to water)
In corners or between walls and ceilings
Between cabinets and cupboards
Around air conditioning vents and the ceiling
Where shrinkage or movement has caused rigid fillers to crack
Gaps with the maximum width of 25mm and depth of 12mm
What materials is this product suitable for?
Timber
Brick & Concrete
Plasterboard, particleboard & fibre cement sheeting
Masonry
Ceramic Tiles
Glass
Aluminium
Bare or painted surfaces
Colorbond
Many other building materials
How to Use
Ensure the surface is clean, dry, and free from dust, grease, flaking/powdery paint, and old or crumbling caulk.
Cut the seal and nozzle, fit it to the top of the cartridge, and insert the cartridge into a caulking gun such as Selleys Light Speed Caulking Gun.
Hold the caulking gun at a 45° angle and apply, forcing the product into the gap.
Smooth with a wet finger or spatula.
Clean up excess with a damp cloth immediately and clean hands and tools with water.
Allow surface to skin thoroughly prior to painting with water-based paints. If using oil-based paints or for large gaps, allow the sealant to set for about 24 hours and ensure the product is completely cured.
Avoid water contact until fully cured – 72 hours or longer in cold weather.
Limitations
Not recommended for foot traffic areas, gaps between tongue and groove boards, or weatherboard overlaps. Use Selleys No More Gaps Timber Flooring Flexible Gap Filler for gaps between tongue and groove boards, and Selleys No More Gaps Exterior & Weatherboard Gap Filler for weatherboard overlaps.
Not suitable for areas in prolonged contact with water (e.g., showers, pools, & spas). Use Selleys Silicone Sealant for significant joint movement or areas of frequent water immersion.
Do not apply or store below 5°C.
Handy Tips
Ensure you tape both sides of the gap before applying the product for a neat finish and easier cleanup.
When first applying, extrude a small amount onto scrap material to ensure smooth, continuous flow of gap filler.
If wiping off excess with a wet finger, wet it with water (not saliva) to avoid bacteria that can promote mould growth.
Allow surfaces to skin before painting, approximately 30 minutes. Protect from rain until the surface is firmly skinned.
Some water-based undercoats and flat paints may crack when drying. To reduce this, allow the product to cure for 24 hours in small gaps or 48 hours in larger gaps before painting.
Keep a pack of Selleys Sugar Soap Wipes handy for easy cleanup.
Clean Up
Water-based, so clean up with water.
Uncured product may be removed with water.
Cured product can be removed by sanding and scraping.
Size
450g Cartridge
Colours
Black
Brilliant White
Brown
Cedar
Charcoal
Coffee
Cream
Ivory
Light Grey
Technology
Water-Based
Use
Interior & Exterior
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Selleys No More Gaps Exterior & Weatherboard is a specially formulated flexible gap filler, with superior weather, UV and mould resistance to protect against harsh external elements such as rain, wind and UV rays. It can be painted over with both water and oil based paints, so you can give your house the professional finish it deserves.
Features
Superior flexibility to cope with building movement, meaning the cracks and gaps will be hidden for longer.
Has greater than 500% elongation/stretch and up to +/- 25% joint movement capability.
Superior adhesion to a broad range of surfaces, resulting in a lasting finish.
Has good resistance to weathering
Contains a titanium compound for superior UV resistance.
Contains a fungicide and algaecide to protect against unsightly mould and algae growth.
Can be painted over with both water and oil based paints, after the surface has skinned. (Approximately 30 minutes after application)..
Wide joints are best left for 48 hours before painting as some paints shrink during drying that can cause the paint to crack.
Is formulated for long term resistance to cracking and crumbling.
Is water based, so can be cleaned up with water.
Will not stain building materials.
Where can this product be used?
Between exterior window and door frames
Fascia boards and eaves
Masonry Walls
Tiling
Timber & synthetic weatherboards
Brickwork
Fences
Where shrinkage or movement has caused rigid fillers to crack
Gaps with a maximum width of 25mm & depth of 12mm
What materials is this product suitable for?
Timber
Brick & Concrete
Fibre cement sheeting, plasterboard
Masonry
Ceramic Tiles
Glass
Aluminium & other metals
Many other building surfaces
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Selleys No More Gaps Exterior is a specially formulated flexible gap filler, with superior weather, UV and mould resistance to protect against harsh external elements such as rain, wind and UV rays. It can be painted over with both water and oil based paints, so you can give your house the professional finish it deserves. Also available in easy tube format.
Features
Superior flexibility to cope with building movement, meaning the cracks and gaps will be hidden for longer.
Has greater than 500% elongation/stretch and up to +/- 25% joint movement capability.
Superior adhesion to a broad range of surfaces, resulting in a lasting finish.
Has good resistance to weathering
Contains a titanium compound for superior UV resistance.
Contains a fungicide and algaecide to protect against unsightly mould and algae growth.
Can be painted over with both water and oil based paints, after the surface has skinned. (Approximately 30 minutes after application)..
Wide joints are best left for 48 hours before painting as some paints shrink during drying that can cause the paint to crack.
Is formulated for long term resistance to cracking and crumbling.
Is water based, so can be cleaned up with water.
Will not stain building materials.
Where can this product be used?
Between exterior window and door frames
Fascia boards and eaves
Masonry Walls
Tiling
Timber & synthetic weatherboards
Brickwork
Fences
Where shrinkage or movement has caused rigid fillers to crack
Gaps with a maximum width of 25mm & depth of 12mm
What materials is this product suitable for?
Timber
Brick & Concrete
Fibre cement sheeting, plasterboard
Masonry
Ceramic Tiles
Glass
Aluminium & other metals
Many other building surfaces
How To Use
Ensure the surface is clean, dry and free from dust, grease, flaking/powdery paint and old or crumbling caulk.
Cut seal and nozzle and fit to cartridge. Insert into a quality caulking gun such as Selleys Light Speed caulking gun.
Apply with caulking gun, forcing product into gap.
Smooth with a wet spatula, ensuring sufficient product remains in joint.
Clean up with a damp cloth immediately.
Allow to skin (about 30 minutes) before painting with water-based paints. If oil-based paints are to be used, or if gaps are large, allow sealant to set for about 24 hours and ensure the product is completely cured.
Protect from water until firmly skinned. Allow for longer skin and cure times in damp conditions.
Limitations:
For new weatherboard, check weatherboard manufacturers instructions before using this product
Note that in very harsh conditions, joints between boards may expand beyond products movement capability. In such cases re-apply product and paint over.
Not suitable for areas of continuous water immersion eg ponds
Not suitable for application at below 5°C
Protect from rain until the product has firmly skinned, and allow longer skin and cure times in damp conditions.
Handy Tips
Ensure you tape both sides of the gap before applying the product. This ensures a neat finish and makes it easier to clean up.
When first applying product, extrude a small amount onto a piece of scrap material to ensure a smooth continuous flow of gap filler.
If you are going to wipe off the excess gap filler with a wet finger, ensure you wet your finger with water and not saliva, as saliva contains bacteria and this will increase the chances of mould growing in your gap filler.
Allow the surfaces to skin prior to painting, which is approximately 30 minutes. Protect from rain until firmly skinned. Allow for longer skin and cure times in damp conditions.
Some water based under coats and flat paints may crack on drying. To reduce this effect, allow the product to cure for 24 hours in small gaps or 48 hours in larger gaps before painting with such paints.
For maximum durability on bare exterior surfaces, apply a coat of acrylic paint and allow to dry, before applying this gap sealant. Always paint over with a quality exterior paint.
To ensure you get a professional finish ensure you paint with a good quality paint and paint brush. Painting with a good brush ensures the finish and durability of the paint is increased. We recommend a 50mm Edger Brush, as the cut angle of the bristles takes the work out of applying paint.
Keep a pack of Selleys Sugar Soap Wipes handy to wipe up any spills and for cleaning. They are an easy and effective way to keep clean on the job.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Selleys No More Gaps Bathroom & Kitchen is a flexible gap filler with superior water and mould resistance for bathroom and kitchen surfaces.
Features
Superior water resistance.
Superior flexibility to cope with building movement, meaning the cracks and gaps will be hidden for longer. Up to +/- 25% movement capability.
Optimum adhesion is achieved on ceramics, glass, aluminium, most plastic and cement.
Mould resistant-contains a fungicide to help protect against unsightly mould growth.
Can be painted over with both water and oil based paints
Easy water clean-up
Low odour
Where can this product be used?
Bathroom vanities
Bathroom cabinets
In and around glass and tiles
Cabinets
Architraves
Skirting boards
Bench tops
Windows
Door frames
What materials is this product suitable for?
Ceramics
Glass
Aluminium
Most Plastics
Cement Sheeting
Wood
Plasterboard
Many other building surfaces
Ensure the surface is clean and free from dust, grease, flaking/powdery paint and old or crumbling caulk.
Cut seal and nozzle and fit to cartridge. Insert into a quality caulking gun, such as Selleys Light Speed caulking gun.
Apply with caulking gun, forcing product into gap
Smooth with a wet spatula.
Clean up with a damp cloth immediately, before filler skins in approx. 10-15 minutes.
Allow surfaces to skin prior to painting (approximately 1 hour). Skin time will be extended in cold or humid conditions, or if painting with flat or ceiling paints (approximately 3 hours)
To allow product to strengthen, protect from water for 24 hours.
Limitations:
Should not be used in permanently damp locations. Use Selleys® Wet Area Silicone Sealant around sinks, baths and shower recesses.
Not recommended for prolonged contact with water.
Tips
Ensure you tape both sides of the gap before applying the product. This ensures a neat finish and makes it easier to clean up.
When first applying product, extrude a small amount onto a piece of scrap material to ensure a smooth continuous flow of gap filler.
Remove the tape before the gap filler skins.
If you are going to wipe off the excess gap filler with a wet finger, ensure you wet your finger with water and not saliva, as saliva contains bacteria and this will increase the chances of mould growing in your gap filler. It is best to use a spatula dipped in soapy water.
Clean off all excess No More Gaps Bathroom & Kitchen from equipment immediately before it cures with a damp cloth. Once cured, No More Gaps Bathroom & Kitchen is extremely difficult to remove and must be trimmed with a knife.
Keep a pack of Selleys Sugar Soap Wipes handy to wipe up any spills and for cleaning. They are an easy and effective way to keep clean on the job.
To avoid paint cracking, apply at temperatures above 5°C and do not apply paint too thick.
Allow longer drying times before painting with flat or ceiling paints and in cooler weather.
Can be applied to damp surfaces however product must be allowed to dry following application.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Selleys No More Gaps Fast Dry has been designed to be painted over in just 20 minutes so that you can finish the job sooner! No More Gaps Fast Dry also provides superior crack resistance with high flexibility and low shrinkage.
Features
Paint over in 20 minutes*
Superior crack resistance
Superior adhesion to a broad range of surfaces, resulting in a lasting finish
A smooth flawless finish and minimal shrinkage
Can be cleaned up easily and quickly with water
Will not stain building materials
Can be used indoors and outdoors
*Allow longer drying times before painting with flat or ceiling paints or in cooler weather.
Where can this product be used?
Architraves
Skirting boards
Cornices
Window and door frames
Wall joints
What materials is this product suitable for?
Timber
Brick & Concrete
Plasterboard, particleboard & fibre cement sheeting
Masonry
Ceramic Tiles
Glass
Aluminium
Painted surfaces
Many other building materials
How to Use
Ensure the surface is clean, dry and free from dust, grease, flaking/powdery paint and old or crumbling caulk.
Cut seal and nozzle and fit to cartridge. Insert into caulking gun such as Selleys Light Speed Caulking gun.
Apply with caulking gun, forcing product into gap.
For a smooth finish, smooth with a finger dipped in water. For a professional finish use a paint scraper such as a 50mm Soft Grip Scraper.
Clean up excess with a damp cloth immediately and clean hands and tools with water.
Allow to skin (about 20 minutes) before painting with water-based paints. If oil-based paints are to be used, or if gaps are large, allow sealant to set for about 24 hours and ensure the product is completely cured.
Limitations:
For gaps between tongue and groove boards and weatherboards use No More Gaps® Exterior & Weatherboard.
Where movement is excessive or for areas where contact with water is frequent, use the appropriate Selleys® Silicone Sealant.
Handy Tips
To avoid paint cracking, apply at temperatures above 10°C and do not apply paint too thick.
Ensure you tape both sides of the gap before applying the product. This ensures a neat finish and makes it easier to clean up.
When first applying product, extrude a small amount onto a piece of scrap material to ensure a smooth continuous flow of gap filler, and a perfect finish.
If you are going to wipe off the excess gap filler with a wet finger, ensure you wet your finger with water and not saliva, as saliva contains bacteria and this will increase the chances of mould growing in your gap filler.
Allow the surfaces to skin prior to painting, which is approximately 20 minutes.
Protect from rain until firmly skinned.
Allow for longer skin and cure times in damp conditions.
Some water based under coats and flat paints may crack on drying. To reduce this effect allows the product to cure for 24 hours in small gaps or 48 hours in larger gaps before painting with such paints.
For exterior applications protect from rain until firmly skinned.
Keep a pack of Selleys Sugar Soap Wipes handy to wipe up any spills and for cleaning. They are an easy and effective way to keep clean on the job.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Selleys No More Gaps Interior Colours is a flexible gap filler available in a range of modern colours, to fill those unsightly gaps and cracks around the home and take away the need to paint.
Features
Available in a great colour range, so no need to paint.
Paintable if required.
Superior flexibility to cope with building movement, meaning the cracks and gaps will be hidden for long. Has greater than 350% elongation/stretch and up to +/- 20% movement capability.
Superior adhesion to a broad range of surfaces, resulting in a lasting finish.
A smooth flawless finish and minimal shrinkage
Can be painted over with both water and oil-based paints, after the surface has skinned. (Approximately 30 minutes after application).
Wide joints are best left for 48 hours before painting as some paints shrink during drying that can cause the paint to crack
Is formulated for long term resistance to cracking and crumbling.
Is water-based, so can be cleaned up with water.
Will not stain building materials.
Has good resistance to weathering.
Mould and mildew resistance.
Where can this product be used?
Between window and door frames and the wall.
Along skirting boards.
Around cornices.
Between benchtops and tiles which are not exposed to water.
In corners or between walls and ceilings
Between cabinets and cupboards
Around air conditioning vents and the ceiling
Where shrinkage or movement has caused rigid fillers to crack
Gaps with the maximum width of 25mm and depth of 12mm.
What materials is this product suitable for?
Timber
Brick & Concrete
Plasterboard, particleboard & fibre cement sheeting
Masonry
Ceramic Tiles
Glass
Aluminium
Bare or painted surfaces
Colorbond
Many other building materials
How To Use
Ensure the surface is clean, dry and free from dust, grease, flaking/powdery paint and old or crumbling caulk.
Cut the seal and nozzle and fit to the top of the cartridge. Insert the cartridge into a caulking gun such as Selleys Light Speed Caulking gun.
Hold the caulking gun at a 45° angle and apply, forcing product into gap
Smooth with a wet finger or spatula
Clean up excess with a damp cloth immediately and clean hands and tools with water.
Allow surface to skin thoroughly prior to painting with water-based paints. If oil-based paints are to be used, or if gaps are large, allow sealant to set for about 24 hours and ensure the product is completely cured.
Avoid water contact until fully cured- 72 hours or longer in cold weather.
Limitations:
Not recommended for foot traffic areas, gaps between tongue and groove boards or weatherboard overlaps. Use Selleys(R) No More Gaps(R) Timber Flooring Flexible Gap Filler for gaps between tongue and groove boards. Use Selleys(R) No More Gaps(R) Exterior & Weatherboard Gap Filler for weatherboard overlaps.
Not suitable for areas in prolonged contact with water eg. showers, pools & spas. Where significant joint movement occurs, or for areas of frequent water immersion, use the appropriate Selleys(R) Silicone Sealant.
Do not apply or store below 5°C.
Handy Tips
Ensure you tape both sides of the gap before applying the product. This ensures a neat finish and makes it easier to clean up.
When first applying the product, extrude a small amount onto a piece of scrap material to ensure a smooth continuous flow of gap filler.
If you are going to wipe off the excess gap filler with a wet finger, ensure you wet your finger with water and not saliva, as saliva contains bacteria and this will increase the chances of mould growing in your gap filler.
Allow the surfaces to the skin prior to painting, which is approximately 30 minutes. Protect from rain until firmly skinned. Allow for longer skin and cure times in damp conditions.
Some water-based undercoats and flat paints may crack on drying. To reduce this effect allows the product to cure for 24 hours in small gaps or 48 hours in larger gaps before painting with such paints.
Keep a pack of Selleys Sugar Soap Wipe handy to wipe up any spills and for cleaning. They are an easy and effective way to keep clean on the job.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Selleys No More Gaps Multipurpose gap filler delivers a smooth finish and because of its superior flexibility and low shrinkage, those unsightly gaps and cracks won’t re-appear.
Features
Superior flexibility to cope with building movement, meaning the cracks and gaps will be hidden for longer.
Has greater than 300% elongation/stretch and up to +/- 15% movement capability.
Superior adhesion to a broad range of surfaces, resulting in a lasting finish.
A smooth flawless finish and minimal shrinkage.
Can be painted over with both water and oil based paints, after the surface has skinned (approximately 30 minutes* after application).
Is formulated for long term resistance to cracking and crumbling.
Easy water clean-up
Will not stain building materials.
Has good resistance to weathering.
Low toxic, low odour, low VOC, less harmful to the environment
Where can this product be used?
Between window and door frames and the wall
Along skirting boards
Around cornices
Between benchtops and tiles which are not exposed to water
In corners or between walls and ceilings
Between cabinets and cupboards
Around air conditioning vents and the ceiling
Where shrinkage or movement has caused rigid fillers to crack
Gaps with the maximum width of 25mm and depth of 12mm
What materials is this product suitable for?
Timber
Brick & Concrete
Plasterboard, particleboard & fibre cement sheeting
Masonry
Ceramic Tiles
Glass
Aluminium
Paint
Many other building materials
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Selleys No More Gaps Multipurpose gap filler delivers a smooth finish and because of its superior flexibility and low shrinkage, those unsightly gaps and cracks won’t re-appear.
Features
Superior flexibility to cope with building movement, meaning the cracks and gaps will be hidden for longer.
Has greater than 300% elongation/stretch and up to +/- 15% movement capability.
Superior adhesion to a broad range of surfaces, resulting in a lasting finish.
A smooth flawless finish and minimal shrinkage.
Can be painted over with both water and oil based paints, after the surface has skinned (approximately 30 minutes* after application).
Is formulated for long term resistance to cracking and crumbling.
Easy water clean-up
Will not stain building materials.
Has good resistance to weathering.
Low toxic, low odour, low VOC, less harmful to the environment
Where can this product be used?
Between window and door frames and the wall
Along skirting boards
Around cornices
Between benchtops and tiles which are not exposed to water
In corners or between walls and ceilings
Between cabinets and cupboards
Around air conditioning vents and the ceiling
Where shrinkage or movement has caused rigid fillers to crack
Gaps with the maximum width of 25mm and depth of 12mm
What materials is this product suitable for?
Timber
Brick & Concrete
Plasterboard, particleboard & fibre cement sheeting
Masonry
Ceramic Tiles
Glass
Aluminium
Paint
Many other building materials
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Selleys No More Gaps Timber Floors is specifically designed to fill and sealing gaps around and between tongue and groove timber flooring and between other timber panels and fittings where extra flexibility is required.
Features
Superior flexibility and stretch capability to cope with movement
Truly sandable to give a smooth clean finish.
Contains real wood fibre allowing the filler to receive stains better than standard gap fillers
Filler provides an airtight seal, keeping out draughts, dust and pests.
Easy water clean up
Where can this product be used?
For filling and sealing gaps around and between tongue and groove timber floors.
Around and between all types of timber panels and fittings eg. Bedroom and kitchen fittings, benchtops, skirting boards and architraves.
What materials is this product suitable for?
Timber floors
Timber match:
Jarrah - Jarrah, River Red Gum, Karri
Hardwood - Black Butt, Spotted Gum, Brush Box , Tasmanian Oak, Cypress, Beech
Walnut - Ironbark, Teak, Dark stained timbers and engineered floors
Baltic - Pine, Myrtle, Alpine Ash
Size
380g Cartridge
Technology
Water-Based
Use
Interior
How to Use:
The surface to be filled must be clean, dry and free from dust.
Cut seal and nozzle to suit the width of the gap. Fit to the cartridge. Insert into a caulking gun such as Selleys Light Speed Caulking gun.
Apply with a caulking gun, forcing product into the gap.
Press in and smooth off with a spatula. Take care not to drag out applied filler from the gap. Use a spatula to scrape off as much residue as possible from the timber surface, to minimise sanding necessary.
Clean up with a damp cloth immediately.
Allow drying for at least 24 hours before sanding off any residue from the timber surface. Allow longer time in colder weather or if residue left on timber is excessive.
Stain and varnish/paint as desired. Ensure stain/varnish is not allowed to pool in the joint – lightly wipe off while wet if necessary.
Limitations:
Not for exterior use.
Not for gaps greater than 3mm wide in trafficable joints.
Tips:
Ensure sufficient product is applied into the gap if filling tongue and groove overlaps
Coverage: 18 m / 3mm bead
Re-apply filler if timber movement is excessive and movement capability is exceeded, or if a flush fill is desired.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Selleys No More Gaps Timber Floors is specifically designed to fill and sealing gaps around and between tongue and groove timber flooring and between other timber panels and fittings where extra flexibility is required.
Features
Superior flexibility and stretch capability to cope with movement
Truly sandable to give a smooth clean finish.
Contains real wood fibre allowing the filler to receive stains better than standard gap fillers
Filler provides an airtight seal, keeping out draughts, dust and pests.
Easy water clean up
Where can this product be used?
For filling and sealing gaps around and between tongue and groove timber floors.
Around and between all types of timber panels and fittings eg. Bedroom and kitchen fittings, benchtops, skirting boards and architraves.
What materials is this product suitable for?
Timber floors
Timber match:
Jarrah - Jarrah, River Red Gum, Karri
Hardwood - Black Butt, Spotted Gum, Brush Box , Tasmanian Oak, Cypress, Beech
Walnut - Ironbark, Teak, Dark stained timbers and engineered floors
Baltic - Pine, Myrtle, Alpine Ash
Size
380g Cartridge
Technology
Water-Based
Use
Interior
How to Use:
The surface to be filled must be clean, dry and free from dust.
Cut seal and nozzle to suit the width of the gap. Fit to the cartridge. Insert into a caulking gun such as Selleys Light Speed Caulking gun.
Apply with a caulking gun, forcing product into the gap.
Press in and smooth off with a spatula. Take care not to drag out applied filler from the gap. Use a spatula to scrape off as much residue as possible from the timber surface, to minimise sanding necessary.
Clean up with a damp cloth immediately.
Allow drying for at least 24 hours before sanding off any residue from the timber surface. Allow longer time in colder weather or if residue left on timber is excessive.
Stain and varnish/paint as desired. Ensure stain/varnish is not allowed to pool in the joint – lightly wipe off while wet if necessary.
Limitations:
Not for exterior use.
Not for gaps greater than 3mm wide in trafficable joints.
Tips:
Ensure sufficient product is applied into the gap if filling tongue and groove overlaps
Coverage: 18 m / 3mm bead
Re-apply filler if timber movement is excessive and movement capability is exceeded, or if a flush fill is desired.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Selleys No More Gaps Timber Floors is specifically designed to fill and sealing gaps around and between tongue and groove timber flooring and between other timber panels and fittings where extra flexibility is required.
Features
Superior flexibility and stretch capability to cope with movement
Truly sandable to give a smooth clean finish.
Contains real wood fibre allowing the filler to receive stains better than standard gap fillers
Filler provides an airtight seal, keeping out draughts, dust and pests.
Easy water clean up
Where can this product be used?
For filling and sealing gaps around and between tongue and groove timber floors.
Around and between all types of timber panels and fittings eg. Bedroom and kitchen fittings, benchtops, skirting boards and architraves.
What materials is this product suitable for?
Timber floors
Timber match:
Jarrah - Jarrah, River Red Gum, Karri
Hardwood - Black Butt, Spotted Gum, Brush Box , Tasmanian Oak, Cypress, Beech
Walnut - Ironbark, Teak, Dark stained timbers and engineered floors
Baltic - Pine, Myrtle, Alpine Ash
Size
380g Cartridge
Technology
Water-Based
Use
Interior
How to Use:
The surface to be filled must be clean, dry and free from dust.
Cut seal and nozzle to suit the width of the gap. Fit to the cartridge. Insert into a caulking gun such as Selleys Light Speed Caulking gun.
Apply with a caulking gun, forcing product into the gap.
Press in and smooth off with a spatula. Take care not to drag out applied filler from the gap. Use a spatula to scrape off as much residue as possible from the timber surface, to minimise sanding necessary.
Clean up with a damp cloth immediately.
Allow drying for at least 24 hours before sanding off any residue from the timber surface. Allow longer time in colder weather or if residue left on timber is excessive.
Stain and varnish/paint as desired. Ensure stain/varnish is not allowed to pool in the joint – lightly wipe off while wet if necessary.
Limitations:
Not for exterior use.
Not for gaps greater than 3mm wide in trafficable joints.
Tips:
Ensure sufficient product is applied into the gap if filling tongue and groove overlaps
Coverage: 18 m / 3mm bead
Re-apply filler if timber movement is excessive and movement capability is exceeded, or if a flush fill is desired.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Selleys No Mould Silicone sealant is specially designed to create a long lasting waterproof seal in areas where mould resistance is necessary
FeaturesSuperior formulation+ that stops mould growth*Fast skinning formulation which means you can use your shower in 1 hourProvides a durable waterproof sealResists lifting
Where can this product be used?Suitable for use in humid and damp environments such asKitchensBathroomsLaundriesShowersBasinstilesWorktopsBaths & spasPlumbing fixtures
What materials is this product suitable for?CeramicGlazed & porcelain fixturesAluminiumPlastic laminatesSome rubbersGlassStainless Steel
How to UseBefore applying your new sealant we recommend spraying Selleys Rapid Mould Killer into the gap to kill any residual mouldThoroughly clean surface where sealant will be applied with turps and dry completelyCut nozzle at 45°angle, cut cartridge tip and fit nozzlePlace in a caulking gun, apply with steady pressure, ensuring sealant is pushed into the jointTool with a spatula dipped in detergent water within 5-10 minutes of applicationClean up with turps before product skins
Limitations:
+Compared to Selleys Wet Area#Sealant will be waterproof and shower ready in 1 hour after application in showers. The semi-cured sealant must not be touched until fully cured (at least 48 hours)*To maintain your sealant properties, ensure you regularly clean off any soap scum and dirt as these encourage mould growthNot suitable for aquariums, food or drinking water contact, permanent immersion in water, or metals other than aluminium and stainless steel. Not suitable for PE, PP, PTFE and some rubbers. Pre-test on other surfaces for compatibility
TipsFor neater joints, mask sides before applying the sealant and remove the tape before sealant skinsNot paintable. Complete painting 7 days before applying the sealant
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Selleys No Mould Silicone sealant is specially designed to create a long lasting waterproof seal in areas where mould resistance is necessary
Features
Superior formulation+ that stops mould growth*
Fast skinning formulation which means you can use your shower in 1 hour
Provides a durable waterproof seal
Resists lifting
Where can this product be used?
Suitable for use in humid and damp environments such as
Kitchens
Bathrooms
Laundries
Showers
Basins
tiles
Worktops
Baths & spas
Plumbing fixtures
What materials is this product suitable for?
Ceramic
Glazed & porcelain fixtures
Aluminium
Plastic laminates
Some rubbers
Glass
Stainless Steel
How to Use
Before applying your new sealant we recommend spraying Selleys Rapid Mould Killer into the gap to kill any residual mould
Thoroughly clean surface where sealant will be applied with turps and dry completely
Cut nozzle at 45°angle, cut cartridge tip and fit nozzle
Place in a caulking gun, apply with steady pressure, ensuring sealant is pushed into the joint
Tool with a spatula dipped in detergent water within 5-10 minutes of application
Clean up with turps before product skins
Limitations:
+Compared to Selleys Wet Area
#Sealant will be waterproof and shower ready in 1 hour after application in showers. The semi-cured sealant must not be touched until fully cured (at least 48 hours)
*To maintain your sealant properties, ensure you regularly clean off any soap scum and dirt as these encourage mould growth
Not suitable for aquariums, food or drinking water contact, permanent immersion in water, or metals other than aluminium and stainless steel. Not suitable for PE, PP, PTFE and some rubbers. Pre-test on other surfaces for compatibility
Tips
For neater joints, mask sides before applying the sealant and remove the tape before sealant skins
Not paintable. Complete painting 7 days before applying the sealant
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Selleys No Mould Silicone sealant is specially designed to create a long lasting waterproof seal in areas where mould resistance is necessary
Features
Superior formulation+ that stops mould growth*
Fast skinning formulation which means you can use your shower in 1 hour
Provides a durable waterproof seal
Resists lifting
Where can this product be used?
Suitable for use in humid and damp environments such as
Kitchens
Bathrooms
Laundries
Showers
Basins
tiles
Worktops
Baths & spas
Plumbing fixtures
What materials is this product suitable for?
Ceramic
Glazed & porcelain fixtures
Aluminium
Plastic laminates
Some rubbers
Glass
Stainless Steel
How to Use
Before applying your new sealant we recommend spraying Selleys Rapid Mould Killer into the gap to kill any residual mould
Thoroughly clean surface where sealant will be applied with turps and dry completely
Cut nozzle at 45°angle, cut cartridge tip and fit nozzle
Place in a caulking gun, apply with steady pressure, ensuring sealant is pushed into the joint
Tool with a spatula dipped in detergent water within 5-10 minutes of application
Clean up with turps before product skins
Limitations:
+Compared to Selleys Wet Area
#Sealant will be waterproof and shower ready in 1 hour after application in showers. The semi-cured sealant must not be touched until fully cured (at least 48 hours)
*To maintain your sealant properties, ensure you regularly clean off any soap scum and dirt as these encourage mould growth
Not suitable for aquariums, food or drinking water contact, permanent immersion in water, or metals other than aluminium and stainless steel. Not suitable for PE, PP, PTFE and some rubbers. Pre-test on other surfaces for compatibility
Tips
For neater joints, mask sides before applying the sealant and remove the tape before sealant skins
Not paintable. Complete painting 7 days before applying the sealant
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Selleys Oven Plus Heavy Duty Gel is a powerful, low-fume cleaning solution formulated to remove baked-on grease and grime from ovens, cookware and bakeware. Its thick gel formula clings to vertical surfaces for deep cleaning with minimal scrubbing. Designed for warm-surface application, it delivers excellent results without harsh fumes.
Surface Preparation
Ensure the area is well ventilated before starting.
Remove loose debris, racks, trays and oven accessories.
Warm the oven slightly (no hotter than 90 °C), then turn it off and allow it to cool for 10 minutes before applying the gel.
Protect surrounding surfaces such as benchtops and floors from splashes.
Wear protective gloves and safety goggles when handling the product.
Application Instructions
Shake the tube well before use.
Apply a thin, even layer of gel using the integrated brush or a dry sponge.
Coat surfaces in order: back wall, sides, oven floor, ceiling, and door.
Allow the gel to dwell for approximately 30 minutes. Do not let it dry out.
Wipe off with a damp cloth. For stubborn spots, use a non-scratch scourer.
Rinse thoroughly with water and dry before reassembling oven parts.
For trays and racks, apply gel evenly, leave for 30 minutes, then rinse and dry.
If cleaning carbon steel or cast iron cookware, dry and oil immediately to prevent rust.
Coverage
A 400 g tube typically covers a standard oven interior and racks in one application, depending on the level of buildup and thickness of application.
Drying / Dwell Time
Allow the product to sit for around 30 minutes. Do not exceed the recommended dwell time. Wipe and rinse thoroughly once the gel has loosened the grime.
Cleanup
Remove residues with a damp cloth or sponge. Rinse thoroughly with clean water to remove any remaining product. Avoid rinsing directly into drains. Dispose of waste according to local guidelines.
Technical Data
Form: Thick gel
Colour: Clear to light blue
pH: 13–14 (strongly alkaline)
Density: Approximately 1.17 g/cm³
Viscosity: ~1,100 cP
Water solubility: Completely miscible
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Selleys Paint Over Sealant is a permanently paintable sealant.
Features
Paintable
Smooth flawless finish.
Easy to use and can be used on damp surfaces.
Superior adhesion to most building materials.
Low odour so can be used in any environment without discomfort.
Weather resistant by forming a durable seal which remains flexible, not drying or cracking
Superior flexibility +/- 25% movement capability & up to 800% elongation or stretch.
Temperature resistance – approximately -40°C +93°C
Has a 25 year guarantee – when used as directed, i.e. for private use and within 12 months of purchase, the product is guaranteed against crumbling, cracking or drying.
May be discoloured by contact with alloys containing brass, copper or zinc.
Do not allow unused product to freeze.
Where can this product be used?
10879.Window frames that need painting
102879.Capstones Masonry walls that need painting
Perfect for use on or around:
Bricks and concrete
Windows frames
Tiled and wooden fixtures
Areas where a sealant is needed and where you want to paint it
Not suitable for use in below waterline applications.
Not suitable for use on oily woods such as cypress, teak or cedar.
Not for use on polyethylene, polypropylene or Teflon. Pre-test plastics before use.
What materials is this product suitable for?
Glass
Aluminium
Fibre Cement
Painted Surfaces
Ceramics
Masonry
Most metals
Most plastics
Wood
How to use this product
Ensure you tape both sides of the gap before applying the product. This ensures a neat finish and makes it easier to clean up.
When first applying product, extrude a small amount onto a piece of scrap material to ensure a smooth continuous flow of sealant.
Remove the tape before the sealant skins.
For a better finish use a spatula dipped in detergent and water to tool off the sealant.
Allow the surfaces to skin prior to painting, which is approximately 30 minutes. Protect from rain until firmly skinned. Allow for longer skin and cure times in damp conditions.
Some water based under coats & flat paints may crack on drying. To reduce this effect allows the product to cure for 24 hours in small gaps or 48 hours in larger gaps before painting with such paints.
To improve the paint finish, wipe the sealant with detergent solution immediately before painting.
Avoid smearing sealant on the surrounding surfaces as this may effects its paintability.
Work in sections that can be completed before sealant skins. Tooling off and tape removal must be completed before skinning occurs or a rough surface may result so working in sections allows for a better finish.
Keep a pack of SELLEYS Hand Kleen Wipes handy to wipe up any spills and for cleaning any material off the skin before it cures. They are an easy and effective way to keep clean on the job.
Safety tips
Uncured product may irritate eyes. If in eyes, flood the eyes for at least 15 minutes and seek medical advice.
Avoid contact with skin, if contact occurs, wipe off immediately and wash with detergent. It may irrtate sensitive skin.
Avoid breathing in vapours.
Ensure you use a well ventilated area as product releases methyl ethyl ketoxime while curing.
For advice, contact a Poisons Information Centre (AUS 131 126; NZ 0800 764 766) or a doctor.
For further detail on the safe use of this product, please refer to the Material Safety Data Sheet, which can be downloaded from this site.
Keep away from children.
Storage and re-use
Store in cool dry conditions, below 30°C
The sealant should be used within 6 months after opening.
After use keep the nozzle on the cartridge
Silicone is a reactive product and is designed to cure once exposed to air. While the product may be stored for a few months once opened, it does have a limited shelf life. Storage in an upright position in a cool dry place is recommended to maximise the storage life.
If the sealant is going to be used again within a few days, leave the nozzle on and merely extrude approximately 2 cm of product before storing the cartridge upright. This will cure to a plug which can easily be pulled out when required.
For longer storage periods, leave the nozzle on and place a piece of plasticene or Blu Tack over the end of the nozzle. Tightly tape a piece of aluminium foil over the whole nozzle to exclude any air.
When you want to re-use the product, simply take off the foil and plug from the old nozzle pull out the excess silicone from the nozzle with a corkscrew, then re-pierce any cure at the tip of the cartridge and re-use.
If cure has taken place into the cartridge, the product is unlikely to be in a useable state and should be discarded.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
A specially formulated adhesive and primer system that delivers a strong and shock-resistant bond on all plastics*, even polyethylene, polypropylene & ABS.
Features
Strong bond on all plastics*, even difficult rigid plastics like polyethylene, polypropylene & ABS
Shock resistant, giving you a longer-lasting fix
Fast setting in 30 seconds
Also bonds plastic to non-plastic materials such as metals, timber, china, rubber, leather, and paper
*Does not work on PTFE (Teflon)
Where can this product be used?
To repair plastic items made of PP, PE and ABS, e.g. plastic toys, office items, remote control
What materials is this product suitable for?
ALL plastics* including polyethylene, polypropylene and ABS
Metals
Timber
China
Rubber
Leather
Paper
How to Use
Use the primer pen to apply one coat on each plastic surface to be bonded. Primer pen will appear clear on the surface.
Pierce seal at end of the adhesive tube by attaching nozzle & cap and turning clockwise.
Remove cap and apply a small amount of glue to one surface only.
Limitations:
Not suitable for glass or foam, use Selleys Araldite Ultra Clear for glass or Selleys Power Grip Original for polystyrene foam.
Product only works on some rubbers and will not work on PTFE. May cause leather to harden or discolour, test on an inconspicuous area first.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Power Grip™ sticks and withstands virtually anything*. Powered by SIL-X® technology for high versatility and durability, this glue will work even in the most extreme conditions*. Where normal glues fail, Power Grip™ rises to the challenge.
Features
Sticks and withstands virtually anything*
Outperforms Super glue on uneven, porous or non-rigid surfaces.
Shockproof – bends on impact
High flexibility
High bond strength
Gap filling: Sticks uneven surfaces together, which means you can fix things that didn’t break cleanly.
Water & Weatherproof
Temperature Resistant 15C – 120C
Dishwasher Safe
Works on uneven surfaces
Set time 3 minutes
Colour
Dries clear
What materials is this product suitable for?
Metal
Wood
Stone
Bricks
Concrete
Masonry
Ceramic
Glass
Foam
Leather
Laminate
Vinyl
Fabric
Cardboard
Most plastics (will not bond polyethylene or polypropylene plastics; for these use Selleys Plastics Glue)
How to use this product
Use in a well-ventilated area
Ensure surfaces are clean and dry. Remove cap and apply to a surface.
Simply apply and hold the bond in place for at least 1 minute or until set (around 3 mins, allow longer for non-porous surfaces such as metal and plastics).
If necessary clamp or tape to support until adhesive sets – for porous surfaces such as wood and ceramics, practical strength is usually achieved within 12 hours.
Product cures rapidly, wipe nozzle clean and tightly replace cap immediately. Store upright in a cool dry place.
Clean up before adhesive sets with turps or acetone.
Handy tips
Initial bond in 3 minutes, full cure in 12-24 hours.
To reduce set times on non-porous surfaces, keep surfaces apart for 30 seconds before bringing together.
Safety Tips
Causes skin irritation. May cause an allergic skin reaction.
Causes serious eye damage.
KEEP OUT OF REACH OF CHILDREN.
Avoid skin and eye contact and breathing vapours. Use in a well-ventilated area.
Wash thoroughly after handling.
Product releases methanol during cure.
Storage and re-use
Wipe nozzle clean, replace cap & store in a cool dry place.
*Not suitable for polyethylene, polypropylene or PTFE. Not for permanent water immersion. Avoid UV exposure
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Power Grip™ sticks and withstands virtually anything*. Powered by SIL-X® technology for high versatility and durability, this glue will work even in the most extreme conditions*. Where normal glues fail, Power Grip™ rises to the challenge.
Features
Sticks and withstands virtually anything*
Outperforms Super glue on uneven, porous or non-rigid surfaces.
Shockproof – bends on impact
High flexibility
High bond strength
Gap filling: Sticks uneven surfaces together, which means you can fix things that didn’t break cleanly.
Water & Weatherproof
Temperature Resistant 15C – 120C
Dishwasher Safe
Works on uneven surfaces
Set time 3 minutes
Colour
Dries clear
What materials is this product suitable for?
Metal
Wood
Stone
Bricks
Concrete
Masonry
Ceramic
Glass
Foam
Leather
Laminate
Vinyl
Fabric
Cardboard
Most plastics (will not bond polyethylene or polypropylene plastics; for these use Selleys Plastics Glue)
How to use this product
Use in a well-ventilated area
Ensure surfaces are clean and dry. Remove cap and apply to a surface.
Simply apply and hold the bond in place for at least 1 minute or until set (around 3 mins, allow longer for non-porous surfaces such as metal and plastics).
If necessary clamp or tape to support until adhesive sets – for porous surfaces such as wood and ceramics, practical strength is usually achieved within 12 hours.
Product cures rapidly, wipe nozzle clean and tightly replace cap immediately. Store upright in a cool dry place.
Clean up before adhesive sets with turps or acetone.
Handy tips
Initial bond in 3 minutes, full cure in 12-24 hours.
To reduce set times on non-porous surfaces, keep surfaces apart for 30 seconds before bringing together.
Safety Tips
Causes skin irritation. May cause an allergic skin reaction.
Causes serious eye damage.
KEEP OUT OF REACH OF CHILDREN.
Avoid skin and eye contact and breathing vapours. Use in a well-ventilated area.
Wash thoroughly after handling.
Product releases methanol during cure.
Storage and re-use
Wipe nozzle clean, replace cap & store in a cool dry place.
*Not suitable for polyethylene, polypropylene or PTFE. Not for permanent water immersion. Avoid UV exposure
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Power Grip™ sticks and withstands virtually anything*. Powered by SIL-X® technology for high versatility and durability, this glue will work even in the most extreme conditions*. Where normal glues fail, Power Grip™ rises to the challenge.
Features
Sticks and withstands virtually anything*
Outperforms Super glue on uneven, porous or non-rigid surfaces.
Shockproof – bends on impact
High flexibility
High bond strength
Gap filling: Sticks uneven surfaces together, which means you can fix things that didn’t break cleanly.
Water & Weatherproof
Temperature Resistant 15C – 120C
Dishwasher Safe
Works on uneven surfaces
Set time 3 minutes
Colour
Dries clear
What materials is this product suitable for?
Metal
Wood
Stone
Bricks
Concrete
Masonry
Ceramic
Glass
Foam
Leather
Laminate
Vinyl
Fabric
Cardboard
Most plastics (will not bond polyethylene or polypropylene plastics; for these use Selleys Plastics Glue)
How to use this product
Use in a well-ventilated area
Ensure surfaces are clean and dry. Remove cap and apply to a surface.
Simply apply and hold the bond in place for at least 1 minute or until set (around 3 mins, allow longer for non-porous surfaces such as metal and plastics).
If necessary clamp or tape to support until adhesive sets – for porous surfaces such as wood and ceramics, practical strength is usually achieved within 12 hours.
Product cures rapidly, wipe nozzle clean and tightly replace cap immediately. Store upright in a cool dry place.
Clean up before adhesive sets with turps or acetone.
Handy tips
Initial bond in 3 minutes, full cure in 12-24 hours.
To reduce set times on non-porous surfaces, keep surfaces apart for 30 seconds before bringing together.
Safety Tips
Causes skin irritation. May cause an allergic skin reaction.
Causes serious eye damage.
KEEP OUT OF REACH OF CHILDREN.
Avoid skin and eye contact and breathing vapours. Use in a well-ventilated area.
Wash thoroughly after handling.
Product releases methanol during cure.
Storage and re-use
Wipe nozzle clean, replace cap & store in a cool dry place.
*Not suitable for polyethylene, polypropylene or PTFE. Not for permanent water immersion. Avoid UV exposure
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Selleys Roof and Gutter Silicone
Selleys Roof and Gutter Silicone is a neutral (non-acid) cure 100% silicone sealant designed for most building surfaces, including metals, tile, cement sheeting, PVC, and Colorbond® roofing. It is available in a range of colours to match your roof and gutters.
Features
UV and weather-resistant
Superior waterproof seal - superior adhesion and resistant to lifting, provides a long-lasting, flexible seal
Non-corrosive neutral cure formula
Superior flexibility with +/- 25% movement capability
Temperature resistance: approximately -60°C to +150°C
Suitable for contact with drinking water - complies with AS/NZS 4020#
25-year guarantee* against crumbling, cracking, and peeling away
Available in a range of Colorbond® colours to make it easier to select the right colour for the job
Cured sealant at area to volume ratios up to 2500mm²/L
Where can this product be used?
Metal and tile roofing
All metal lap-joint waterproofing
Colorbond roofs and fences
Guttering and flashings
Vents and downpipes
Weatherproofing caravans and trucks
Copper, brass, and zinc
Skylights
What materials is this product suitable for?
Aluminium
Sheet Metal
Copper
Brass
Zinc
Galvanised Metals
Rigid PVC and most plastics, including polystyrene
Rubber
Glass
Terracotta
Concrete
Glazed tiles
BlueScope Steel decorative sheet metals such as Lysaght Zincalume and COLORBOND®
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Selleys Roof and Gutter Silicone
Selleys Roof and Gutter Silicone is a neutral (non-acid) cure 100% silicone sealant designed for most building surfaces, including metals, tile, cement sheeting, PVC, and Colorbond® roofing. It is available in a range of colours to match your roof and gutters.
Features
UV and weather-resistant
Superior waterproof seal - superior adhesion and resistant to lifting, provides a long-lasting, flexible seal
Non-corrosive neutral cure formula
Superior flexibility with +/- 25% movement capability
Temperature resistance: approximately -60°C to +150°C
Suitable for contact with drinking water - complies with AS/NZS 4020#
25-year guarantee* against crumbling, cracking, and peeling away
Available in a range of Colorbond® colours to make it easier to select the right colour for the job
Cured sealant at area to volume ratios up to 2500mm²/L
Where can this product be used?
Metal and tile roofing
All metal lap-joint waterproofing
Colorbond roofs and fences
Guttering and flashings
Vents and downpipes
Weatherproofing caravans and trucks
Copper, brass, and zinc
Skylights
What materials is this product suitable for?
Aluminium
Sheet Metal
Copper
Brass
Zinc
Galvanised Metals
Rigid PVC and most plastics, including polystyrene
Rubber
Glass
Terracotta
Concrete
Glazed tiles
BlueScope Steel decorative sheet metals such as Lysaght Zincalume and COLORBOND®
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Selleys Roof and Gutter Silicone is a neutral (non-acid) cure 100% silicone sealant for most building surfaces including metals, tile, cement sheeting, PVC and Colorbond® roofing. It is available in a range of colours to match your roof and gutters.
Features
UV and weather-resistant
Superior waterproof seal - superior adhesion and resistant to lifting, provides a long-lasting, flexible seal
Non-corrosive neutral cure formula.
Has superior flexibility +/- 25% movement capability
Temperature resistance - approximately -60°C +150°C
Suitable for contact with drinking water - complies with AS/NZS 4020#
25 year guarantee* against crumbling, cracking and peeling away
Available in a range of Colorbond® colours to make it easier to select the right colour for the job
Cured sealant at area to volume ratios up to 2500mm2/L
Where can this product be used?
Metal and tile roofing
All metal lap-joint waterproofing
Colorbond roofs and fences
Guttering and flashings
Vents and downpipes
Weatherproofing caravans and trucks
Copper, brass and zinc
Skylights
What materials is this product suitable for?
Aluminium
Sheet Metal
Copper
Brass
Zinc
Galvanised Metals
Rigid PVC and most plastics including polystyrene
Rubber
Glass
Terracotta
Concrete
Glazed tiles
BlueScope Steel decorative sheet metals such as Lysaght Zincalume and COLORBOND
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Key Features
UV and weather resistant
Superior waterproof seal - superior adhesion and resistant to lifting, provides a long-lasting, flexible seal
Non corrosive neutral cure formula
Has superior flexibility +/- 25% movement capability
Temperature resistance - approximately -60°C +150°C
Suitable for contact with drinking water - complies with AS/NZS 4020#
25 year guarantee* against crumbling, cracking and peeling away
Selleys Roof and Gutter Silicone is a neutral cure (non-corrosive) 100% silicone sealant suitable for most building surfaces including metals, tile, cement sheeting, PVC and Colorbond® roofing. It is available in a variety of colours, including a range of Colorbond(R) matches, to suit your roof and gutters.
Where can this product be used?
Metal and tile roofing
All metal lap-joint waterproofing
Colorbond roofs and fences
Guttering and flashings
Vents and downpipes
Weatherproofing caravans and trucks
Copper, brass and zinc
Skylights
What materials is this product suitable for?
Aluminium
Sheet Metal
Copper
Brass
Zinc
Galvanised Metals
Rigid PVC and most plastics including polystyrene
Rubber
Glass
Terracotta
Concrete
Glazed tiles
BlueScope Steel decorative sheet metals such as Lysaght Zincalume and COLORBOND
How to Use
Use in a well ventilated area. Avoid contact with skin and eyes.
Thoroughly clean and dry surface from oil, dirt and grease with mineral turps.
Cut the seal at the top of the cartridge and cut the nozzle at a 45° angle, to the size of the gap opening. Fit the nozzle to the top of the cartridge and insert the cartridge into a caulking gun such as Selleys Light Speed Caulking gun.
Hold the caulking gun at a 45° angle and gun sealant ahead of nozzle ensuring product is pushed into joint.
For a smooth finish, tool with a spatula dipped in soapy water. Clean up before sealant skins in 5-10 minutes, with a cloth dampened in mineral turps.
Sealant will cure in 72 hours. At this point any unneeded sealant can be removed by trimming with a sharp blade, but avoid under-cutting the seal.
Limitation:
• Not paintable. Complete painting 7 days prior to applying sealant.
• Not recommended for use as a plug for burst pipes.
• Do not use in below waterline applications.
^Not for use on polyethylene, polypropylene or Teflon - pre-test plastics before use
Handy tips
For neater joints, mask sides before applying sealant and remove tape before sealant skins.
When first applying product, extrude a small amount onto a piece of scrap material to ensure a smooth continuous flow of silicone sealant.
For a better finish use a spatula dipped in mineral turps or soapy water to tool off the sealant.
Work in sections that can be completed before sealant skins. Tooling off and tape removal must be completed before skinning occurs or a rough surface may result, so working in sections allows for a better finish.
If there is old silicone which needs to be removed, we recommend using Selleys Silicone Remover, this ingenious product makes removing old silicone easy.
*Warranty Information
* Refer to product label for full conditions. This guarantee does not limit and may not necessarily exceed your rights under the Competition and Consumer Act 2010.
Clean up
Uncured product may be removed with mineral turps.
Cured product can be removed with Selleys Silicone Remover or by cutting and scraping.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Key Features
UV and weather resistant
Superior waterproof seal - superior adhesion and resistant to lifting, provides a long-lasting, flexible seal
Non corrosive neutral cure formula
Has superior flexibility +/- 25% movement capability
Temperature resistance - approximately -60°C +150°C
Suitable for contact with drinking water - complies with AS/NZS 4020#
25 year guarantee* against crumbling, cracking and peeling away
Selleys Roof and Gutter Silicone is a neutral cure (non-corrosive) 100% silicone sealant suitable for most building surfaces including metals, tile, cement sheeting, PVC and Colorbond® roofing. It is available in a variety of colours, including a range of Colorbond(R) matches, to suit your roof and gutters.
Where can this product be used?
Metal and tile roofing
All metal lap-joint waterproofing
Colorbond roofs and fences
Guttering and flashings
Vents and downpipes
Weatherproofing caravans and trucks
Copper, brass and zinc
Skylights
What materials is this product suitable for?
Aluminium
Sheet Metal
Copper
Brass
Zinc
Galvanised Metals
Rigid PVC and most plastics including polystyrene
Rubber
Glass
Terracotta
Concrete
Glazed tiles
BlueScope Steel decorative sheet metals such as Lysaght Zincalume and COLORBOND
How to Use
Use in a well ventilated area. Avoid contact with skin and eyes.
Thoroughly clean and dry surface from oil, dirt and grease with mineral turps.
Cut the seal at the top of the cartridge and cut the nozzle at a 45° angle, to the size of the gap opening. Fit the nozzle to the top of the cartridge and insert the cartridge into a caulking gun such as Selleys Light Speed Caulking gun.
Hold the caulking gun at a 45° angle and gun sealant ahead of nozzle ensuring product is pushed into joint.
For a smooth finish, tool with a spatula dipped in soapy water. Clean up before sealant skins in 5-10 minutes, with a cloth dampened in mineral turps.
Sealant will cure in 72 hours. At this point any unneeded sealant can be removed by trimming with a sharp blade, but avoid under-cutting the seal.
Limitation:
• Not paintable. Complete painting 7 days prior to applying sealant.
• Not recommended for use as a plug for burst pipes.
• Do not use in below waterline applications.
^Not for use on polyethylene, polypropylene or Teflon - pre-test plastics before use
Handy tips
For neater joints, mask sides before applying sealant and remove tape before sealant skins.
When first applying product, extrude a small amount onto a piece of scrap material to ensure a smooth continuous flow of silicone sealant.
For a better finish use a spatula dipped in mineral turps or soapy water to tool off the sealant.
Work in sections that can be completed before sealant skins. Tooling off and tape removal must be completed before skinning occurs or a rough surface may result, so working in sections allows for a better finish.
If there is old silicone which needs to be removed, we recommend using Selleys Silicone Remover, this ingenious product makes removing old silicone easy.
*Warranty Information
* Refer to product label for full conditions. This guarantee does not limit and may not necessarily exceed your rights under the Competition and Consumer Act 2010.
Clean up
Uncured product may be removed with mineral turps.
Cured product can be removed with Selleys Silicone Remover or by cutting and scraping.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Selleys Sealant & Adhesive Remover 375g helps soften and lift old sealants and sticky residues so you can cleanly remove them and re-seal with confidence. The non-drip formula clings to joints and vertical surfaces, making bathroom and kitchen refreshes faster and easier.
Key benefits
Softens cured silicone and many common sealants to aid scraping and removal
Helps break down adhesive residue, tapes and grime build-up
Non-drip gel action for vertical joints, corners and trims
Low mess application with excellent wetting of tight gaps
Preps surfaces for fresh re-sealing and re-bonding
Where to use
Bathrooms: around showers, baths, basins and splashbacks
Kitchens and laundries: benchtop perimeters, sinks and tiles
Windows and doors: frames, trims and glazing edges
Suitable substrates
Glass, ceramic tiles, porcelain, enamel, stainless steel and many metals
Some plastics and laminates (always test first in an inconspicuous spot)
Not recommended on
Natural stone, marble or porous tiles
Freshly painted, delicate or lacquered surfaces
Acrylic and polycarbonate sheets, mirror backings and other sensitive plastics
Directions
Cut away and remove as much old sealant as possible with a plastic scraper.
Protect surrounding areas. Shake or stir if required, then apply a generous layer to remaining residue.
Allow time for the remover to penetrate. Dwell time will vary by sealant type and thickness.
Gently scrape and wipe away loosened material. Reapply if needed for stubborn spots.
Wash the area with warm soapy water, rinse and dry thoroughly before re-sealing.
Pro tips
Score thick beads along the edges with a utility blade before application to help penetration.
Work in manageable sections and avoid letting the remover dry on the surface.
Always test on a small hidden area to check surface compatibility.
Safety
Use in a well ventilated area and wear gloves and eye protection.
Avoid contact with skin and eyes. Keep out of reach of children.
Product details
Brand: Selleys
Type: Sealant and adhesive remover
Pack size: 375g
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
A strong, weather and impact resistant adhesive that is ideal for most shoe repairs.
Features
Easy to use
Strong
Flexible Bond
Weather resistant
Impact resistant
Appearance
Dries yellowish/beige
Where can this product be used?
Sole
Tongue
Strap
Inner sole
Attach beads, jewels, decorative items
Will not bond Polyethylene or Polypropylene plastics. For these we recommend Selleys Plastics Glue. May not adhere to some plastic / rubber soles.
What materials is this product suitable for?
Leather
Canvas
Fabric
Rubber
Cork
Most Plastics
EVA foam (e.g Desert boots sole)
How to use this product
Ensure surfaces are clean, dry and free from dirt or grease. Remove cap and carefully pierce seal.
For larger area repairs such as shoe soles, we recommend you use the contact bond method:
For quick and even bonding, apply to one surface only, press together and pull apart. Keep apart until the adhesive film is almost dry (approx. 10 – 20 minutes).
Carefully line up surfaces to be joined and press surfaces firmly together. Bonds immediately on contact. Clamping may be necessary in some applications.
For smaller areas, either use the contact method as above, or join with a wet bond:
Apply Shoe Glue to one surface only and immediately press together. Lightly clamp or hold until dry.
Allow adhesive to achieve maximum bond strength (24 hours) before wearing your repaired shoe/s.
Wipe nozzle clean and replace cap immediately after use. Clean up application tools and excess adhesive with turps before it dries.
Handy tips
A piece of plastic from a takeaway container makes a good applicator for shoe soles.
Bulldog clips are handy to use for clamping straps and other small areas.
Pack includes a removable nozzle for easy application.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Selleys Spakfilla Coloursmart is a ready-mixed, lightweight filler which contains a dry time indicator that goes on pink and dries off-white, taking the guesswork out of knowing when to sand & paint!
Features
Fills cracks and holes in a single application
Pre-mixed and ready to use
Goes on pink and dries off-white when ready to sand
Minimal shrinkage so no need to overfill
Very fast drying allowing sanding and painting in a short time period
Comes complete with a filling spatula for ease of use
Water based, so can be cleaned up with water
Paintable with oil and water based paints
Where can this product be used?
Filling cracks and holes on surfaces where no structural movement occurs
Filling cracks in walls, ceilings, doors, windows
Repairing holes in walls, ceilings, doors and windows
What materials is this product suitable for?
Plaster
Wallboard
Wood
Plasterboard
Masonry
Fibrous cement
Primed nail heads
Size
180g Tub
Colours
Pink, dries off white
Technology
Water Based
Use
Interior
Exterior
Ensure surfaces are clean, dry and free of loose material.
Using the flexible spatula provided on the lid, press the filler firmly into the crack or hole and smooth off surface; there is no need to overfill.
Lightly sand back any excess filler from the surface after product turns off-white (2 hours for holes up to 2mm deep). If more than 2mm deep, or in cold and humid conditions, expect longer drying times.
Dust off any loose dust before painting with water-based paints. For oil-based paints allow 24 hours before painting.
Limitations:
Not recommended for use on plastic, metal or exterior timber likely to swell/shrink on absorption of water.
Product is not flexible so not suitable for use between surfaces that are subject the structural movement - use Selleys No More Gaps
Not recommended for use where load or compression occurs as product may be crushed e.g. behind a door if the knob touches against the wall.
Nailing this product is not recommended.
Avoid using below 5°C or in wet conditions.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Key Features
Fill cracks and holes in a single application
Pre-mixed and ready to use
Minimal shrinkage so no need to overfill
Very fast drying allowing sanding and painting in a short time period
Comes complete with a filling spatula for ease of use
Water based, so can be cleaned up with water
Paintable with oil and water based paints
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Selleys Spakfilla Heavy Duty is a multi-purpose, tough and durable, light grey ready-mixed filler.
Features
Suitable for interior and exterior applications
Good adhesions to most surfaces
Water and weather resistant
Fill cracks and holes in a single application
Pre-mixed and ready to use
Minimal shrinkage so no need to overfill
Very fast drying allowing sanding and painting in a short time period
Comes complete with a filling spatula for ease of use
Water-based, so can be cleaned up with water
Paintable with oil and water-based paints
Where can this product be used?
Filling holes, dents, cracks or chips in interior and exterior applications where no structural movement occurs
What materials is this product suitable for?
Mortar
Masonry
Concrete
Wood
Stone
Primed metal surfaces
Brick
Plaster
Ensure surfaces are clean, dry and free of loose material. Using the flexible spatula provided on the lid, press the filler firmly into the crack or hole and smooth off surface; there is no need to overfill. For deeper cracks, apply in 6mm layers allowing each layer to dry before applying the next.
Lightly sand back any excess filler from the surface after product dries (2-3 hours for 2mm applications).
Dust off any loose dust before applying undercoat and painting with water-based paints or oil-based paints.
Limitations:
Product is not flexible so not suitable for use between surfaces that are subject to the structural movement - use Selleys No More Gaps.
Avoid using below 5°C or in wet conditions.
Painting with oil-based paints is not recommended until 24 hours after the filler has been applied.
Water-based paints may be used immediately after the filler has set.
If the filler is found to have stiffened prior to use, stir product. The product that has actually hardened should be discarded. If still too dry add one teaspoon of water and stir again to desired consistency.
Application tools may be cleaned with water.
Before painting, clean dust and filler particles using Selleys Sugar Soap or Selleys Super Kleen.
In exterior applications, protect from rain until dry and painted over with 2 coats of paint.
Some paints may temporarily discolour when applied over the filler, but will revert to the correct colour once dry.
For applications more than 2mm deep, or in cold or humid conditions, expect longer drying times.
Keep container closed when not in use.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Selleys Spakfilla Rapid is a ready-mixed, lightweight filler designed for fast and easy repairs. It dries quickly, resists cracking and shrinking, and usually requires only one application—making it ideal for quick patching jobs around the home or office.
Features
Fills cracks and holes in a single application
Pre-mixed and ready to use straight from the tub
Minimal shrinkage – no need to overfill
Fast drying – sand and paint within a short time
Includes a convenient filling spatula
Water-based formula – easy clean-up with water
Paintable with both oil-based and water-based paints
Where to Use
Cracks and holes on stable, non-moving surfaces
Walls, ceilings, doors, and window frames
Small repairs in plaster, timber, and masonry surfaces
Suitable Materials
Wallboard and plasterboard
Wood and timber surfaces
Masonry and plaster
Primed nail heads
Product Details
Colour: White
Technology: Water-based
Use: Interior, or exterior when painted
How to Use
Ensure surfaces are clean, dry, and free of dust or loose material.
Using the provided spatula, press filler firmly into the crack or hole and smooth the surface. No need to overfill.
Allow to dry (approximately 30 minutes for thin applications), then lightly sand for a smooth finish.
Remove dust and paint as desired. For oil-based paints, allow 24 hours before painting.
Limitations
Not suitable for use on plastic, metal, or exterior timber exposed to moisture.
Not flexible – avoid using between surfaces subject to structural movement (use Selleys No More Gaps Coloured Caulk 450g instead).
Not designed for load-bearing areas or surfaces under compression (e.g. behind doors).
Do not nail through filler. Avoid use below 5°C or in wet conditions.
Handy Tips
Wait 24 hours before painting with oil-based paints.
Water-based paints can be applied once the filler has set.
If filler thickens, stir before use. If too dry, add a small amount of water and mix.
Clean tools with water after use.
Before painting, clean with Selleys Sugar Soap Cleaner Concentrate 1L or Selleys Sugar Soap Wipes x25.
For outdoor applications, protect from rain until dry and painted with two coats.
Deeper repairs (over 2mm) may require longer drying times.
Recommended Accessories
For masking before painting: Bear Masking Tape Painter Edge Pro 48mm x 50m
For reinforcing plaster joints: Eazy Tape Plasterboard Joint Tape 90m
Clean Up
Remove uncured product with water.
Once cured, remove by scraping or sanding.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Selleys Spakfilla Rapid is a ready-mixed lightweight filler that is fast drying, virtually non-shrinking, non-cracking & needs only one application.
Features
Fill cracks and holes in a single application
Pre-mixed and ready to use
Minimal shrinkage so no need to overfill
Very fast drying allowing sanding and painting in a short time period
Comes complete with a filling spatula for ease of use
Water-based, so can be cleaned up with water
Paintable with oil and water-based paints
Where can this product be used?
Filling cracks and holes on surfaces where no structural movement occurs
Filling cracks in walls, ceilings, doors, windows
Repairing holes in walls, ceilings, doors and windows
What materials is this product suitable for?
Wallboard
Wood
Masonry
Plaster
Primed nail heads
Plasterboard
Colours White
Technology Water Based
Use Interior
Exterior (when painted)
How To Use
Ensure surfaces are clean, dry and free of loose material.
Using the flexible spatula provided on the lid, press the filler firmly into the crack or hole and smooth off surface; there is no need to overfill.
Lightly sand back any excess filler from the surface after product dries (30 minutes in thin applications).
Dust off any loose dust before painting with water-based paints. For oil-based paints allow 24 hours before painting.
Limitations:
Not recommended for use on plastic, metal or exterior timber likely to swell/shrink on absorption of water.
Product is not flexible so not suitable for use between surfaces that are subject the structural movement - use Selleys No More Gaps
Not recommended for use where load or compression occurs as product may be crushed e.g. behind a door if the knob touches against the wall.
Nailing this product is not recommended.
Avoid using below 5°C or in wet conditions.
Handy Tips
Painting with oil-based paints is not recommended until 24 hours after filler has been applied.
Water based paints may be used immediately after filler has set.
If filler is found to have stiffened prior to use, stir product. Product that has actually hardened should be discarded. If still too dry add one teaspoon of water and stir again to desired consistency.
Application tools may be cleaned with water.
Before painting, clean dust and filler particles using Selleys Sugar Soap or Selleys Super Kleen.
In exterior applications, protect from rain until dry and painted over with 2 coats of paint.
Some paints may temporarily discolour when applied over the filler, but will revert to the correct colour once dry.
For applications more than 2mm deep, or in cold or humid conditions, expect longer drying times.
Keep container closed when not in use.
Clean Up
Uncured product may be removed with water.
Cured product can be removed by scraping or sanding.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Selleys Special Putty is a Linseed oil based, knife grade putty available in a natural colour.
Features
Easy to use. Can be applied by hand or with a putty knife
Product has exceptional keeping qualities
Available in a natural colour
Superior grade putty
Where can this putty be used?
A wood sash putty that is excellent for glazing wooden windows and doors
Bedding glass beads
Not recommended for use with heat absorbing glass
If being used in external applications it is not recommended for use with timber stains, timber oils and clear finishes
Not recommended for use where structural movement may occur
Not recommended for use in metal framed windows.
What materials is this putty suitable for?
Wood
Timber
How to use this product
Rebates and grooves should be rigid, free from distortion, true and square, and should be clean, dry and unobstructed before glazing.
Rebates and grooves should be of a size which allows adequate edge cover and putty volume. Minimum bed putty – 2mm, minimum front putty – 4mm where timber beads are used, and 2mm bed putty and 12mm front putty where no glazing beads are used.
Depth of rebate: 10mm for 3-4mm glass, 15mm for 5-8mm glass.
Two coats of good quality house paint should be applied not less than 2 weeks and not more than 4 weeks after completion of glazing.
Paint should be carried out 2mm above the top line of the putty.
Handy tips
Do not use kerosene, turps or other material to aid in working the putty
Allow putty to skin before applying paint
Product can be applied by hand or with a putty knife. Add a few drops of linseed oil on the hands or knife to make for easier working
Putty can thicken in cold weather. Warming the putty by working it in the hands before the application will soften it.
Putty must be painted in exterior applications.
High humidity, cold weather and use in interior applications can extend skinning times.
Putty can separate on prolonged standing. If excessive oil is observed on the surface try to work the entire mixture together to redistribute the oil.
Before painting, clean and dust & filler particles using Selleys Sugar Soap or Selleys Super Kleen.
Safety tips
Low hazard material
For further detail on the safe use of this product, please refer to the Material Safety Data Sheet, which can be downloaded from this site.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Selleys Special Putty is a Linseed oil based, knife grade putty available in a natural colour.
Features
Easy to use. Can be applied by hand or with a putty knife
Product has exceptional keeping qualities
Available in a natural colour
Superior grade putty
Where can this putty be used?
A wood sash putty that is excellent for glazing wooden windows and doors
Bedding glass beads
Not recommended for use with heat absorbing glass
If being used in external applications it is not recommended for use with timber stains, timber oils and clear finishes
Not recommended for use where structural movement may occur
Not recommended for use in metal framed windows.
What materials is this putty suitable for?
Wood
Timber
How to use this product
Rebates and grooves should be rigid, free from distortion, true and square, and should be clean, dry and unobstructed before glazing.
Rebates and grooves should be of a size which allows adequate edge cover and putty volume. Minimum bed putty – 2mm, minimum front putty – 4mm where timber beads are used, and 2mm bed putty and 12mm front putty where no glazing beads are used.
Depth of rebate: 10mm for 3-4mm glass, 15mm for 5-8mm glass.
Two coats of good quality house paint should be applied not less than 2 weeks and not more than 4 weeks after completion of glazing.
Paint should be carried out 2mm above the top line of the putty.
Handy tips
Do not use kerosene, turps or other material to aid in working the putty
Allow putty to skin before applying paint
Product can be applied by hand or with a putty knife. Add a few drops of linseed oil on the hands or knife to make for easier working
Putty can thicken in cold weather. Warming the putty by working it in the hands before the application will soften it.
Putty must be painted in exterior applications.
High humidity, cold weather and use in interior applications can extend skinning times.
Putty can separate on prolonged standing. If excessive oil is observed on the surface try to work the entire mixture together to redistribute the oil.
Before painting, clean and dust & filler particles using Selleys Sugar Soap or Selleys Super Kleen.
Safety tips
Low hazard material
For further detail on the safe use of this product, please refer to the Material Safety Data Sheet, which can be downloaded from this site.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Selleys STORM Sealant delivers a waterproof seal on any material* wet or dry, indoor or outdoor. It can even be applied in the rain to stop leaks in an instant.
Features
Can be applied to wet or dry surfaces*
Good adhesion on any surface* even when applied in the rain
Excellent UV and weather resistance
Suitable for interior and exterior use
Long lasting flexibility
Easily paintable with water-based paints
Low VOC – so can be used in any environment without discomfort
Made with Sil-X, an advanced polymer technology which delivers superior performance in demanding situations where conventional products fail, on any surface* wet or dry.
Where can this product be used?
Perfect for use on and around:
Skylights
Gutters
Downpipes
Windows
What materials is this product suitable for?
Concrete
Timber
Metals
Cement sheeting
Brick
Plasterboard
Ceramic Tiles
Fibreglass
All construction substrates
Most plastics*
How to use this product
Ensure substrates are clean and free of oil, grease or loose particles.
Cut cartridge tip, fit to the nozzle and cut to size (5mm), then place in the caulking gun.
Apply with the caulking gun, pushing sealant into joint or gaps.
Smooth off using a spatula dipped in turps, within 5 minutes of applying. If painting, paint with two coats of a quality water-based exterior paint.
Storage and re-use
Store in cool, dry conditions below 30°C.
Use within 6 months of opening.
Clean up
Clean up with turps before Storm cures. The cured sealant can be removed by scraping or sanding or with the help of Selleys Silicone Remover.
Handy Hints
For neater joints, mask sides before applying sealant and remove the tape before sealant skins.
Paint with water-based paint. If the paint does not wet out sealant surface properly, lightly sand sealant before painting.
Limitations
Not suitable for PE, PP, PTFE, permanent water immersion or plugging leaks subject to pressure.
Safety tips
Cure excess product before disposal.
Avoid skin and eye contact and inhalation of vapour. If in eyes, wash out immediately with water. If skin contact occurs, wipe off immediately and wash with running water.
Ensure use in a well-ventilated area.
Additional information is provided in the Safety Data Sheet.
![Selleys Marine Flex For Boats Pools and Spas Water Proof [Black]](//gluesaustralia.com.au/cdn/shop/files/f795ca009d10470fb346ebed4b3dc2a3.png?v=1757753303&width=645)
![Selleys Marine Flex For Boats Pools and Spas Water Proof [White]](//gluesaustralia.com.au/cdn/shop/files/091876a6025d44ea89c711822b3ea3d8.jpg?v=1757752868&width=645)
![Selleys No More Gaps Bricks & Mortar x 440g [Terracota]](//gluesaustralia.com.au/cdn/shop/files/81ee53b7eade4c22a1268e1a28879d4e.jpg?v=1757753123&width=645)
![Selleys No More Gaps Bricks Mortar [Charcoal]](//gluesaustralia.com.au/cdn/shop/files/9300697130310_c74acc80-87eb-4da9-9a5a-2847d2d610ab.png?v=1754711847&width=645)
![Selleys No More Gaps Bricks Mortar [Medium Grey]](//gluesaustralia.com.au/cdn/shop/files/9300697130327_41339ef1-92ff-417a-bab1-8529f0ee07f6.png?v=1754711845&width=645)
![Selleys No More Gaps Bricks Mortar [Off White]](//gluesaustralia.com.au/cdn/shop/files/9300697130334_5a88883c-9e8a-4c25-80f6-535ba26ac80d.png?v=1754711844&width=645)
![Selleys No More Gaps Bricks Mortar [Sandstone]](//gluesaustralia.com.au/cdn/shop/files/9300697130297_4ba0669c-67f5-40d4-9f47-db82307f921f.png?v=1754711842&width=645)
![Selleys No More Gaps Coloured Caulk Sealant 450g [Brilliant White]](//gluesaustralia.com.au/cdn/shop/files/c306de337e4245d585ba9870c44c5c2b.jpg?v=1757756191&width=645)
![Selleys No More Gaps Coloured Caulk Sealant 450g [Timeless Grey]](//gluesaustralia.com.au/cdn/shop/files/047808da6e434754b1b4b492e02434e9.jpg?v=1757753116&width=645)
![Selleys No More Gaps Coloured Caulk Sealant 450g [Tranquil Retreat]](//gluesaustralia.com.au/cdn/shop/files/18cfd18e466f43bab8a6fd2d1eaf4bfd.jpg?v=1757753110&width=645)
![Selleys No More Gaps Exterior & Weatherboard 430g [White]](//gluesaustralia.com.au/cdn/shop/files/8a8dbfbe2151431e9a3365cd49a9be75.jpg?v=1757753104&width=645)
![Selleys No More Gaps Filler Bathroom and Kitchen [White]](//gluesaustralia.com.au/cdn/shop/files/c1273312b7d1426c8ba82245f6c8d0de.jpg?v=1757753091&width=645)
![Selleys No More Gaps Filler Sealant Fast Dry [White]](//gluesaustralia.com.au/cdn/shop/files/da7575e6045648c8aee7c9769b69a8cc.jpg?v=1757753086&width=645)
![Selleys No More Gaps Multipurpose Sealant Filler 150g [White]](//gluesaustralia.com.au/cdn/shop/files/87cc1e989ee946138f896f38cf05e9d4.jpg?v=1757753073&width=645)
![Selleys No More Gaps Multipurpose Sealant Filler 475g [White]](//gluesaustralia.com.au/cdn/shop/files/62810ec4c8d842009839ace74d1cac64.png?v=1757753067&width=645)
![Selleys No More Gaps Timber Floors x 380g [Hardwood]](//gluesaustralia.com.au/cdn/shop/files/5160e944b5d3493cbac2a999232381fa.jpg?v=1757753063&width=645)
![Selleys No More Gaps Timber Floors x 380g [Jarrah]](//gluesaustralia.com.au/cdn/shop/files/42b566f39b234ffeab320faed408b86e.jpg?v=1757753057&width=645)
![Selleys No More Gaps Timber Floors x 380g [Walnut]](//gluesaustralia.com.au/cdn/shop/files/169e8e96732544d89fdb6ec6deaba129.jpg?v=1757753052&width=645)
![Selleys No Mould Silicone Sealant Waterproof [White]](//gluesaustralia.com.au/cdn/shop/files/121994701b5c42c1bd5e5c839bcfcd4e.jpg?v=1757753039&width=645)
![Selleys No Mould Silicone Selant 100ml [Translucent]](//gluesaustralia.com.au/cdn/shop/files/6fd66b047782417180c9a9563f0917d8.png?v=1757753033&width=645)
![Selleys No Mould Silicone Selant 100ml [White]](//gluesaustralia.com.au/cdn/shop/files/15eb0d3681e54148ad88ef00e07df55b.png?v=1757753027&width=645)
![Selleys Roof & Gutter Silicone Sealant UV & Weather Resistant 310g [Black]](//gluesaustralia.com.au/cdn/shop/files/2330c4b4af69418ba74ba7691a5becd0.jpg?v=1757756157&width=645)
![Selleys Marine Flex For Boats Pools and Spas Water Proof [Black]](http://gluesaustralia.com.au/cdn/shop/files/f795ca009d10470fb346ebed4b3dc2a3.png?v=1757753303&width=645)
![Selleys Marine Flex For Boats Pools and Spas Water Proof [White]](http://gluesaustralia.com.au/cdn/shop/files/091876a6025d44ea89c711822b3ea3d8.jpg?v=1757752868&width=645)
![Selleys No More Gaps Bricks & Mortar x 440g [Terracota]](http://gluesaustralia.com.au/cdn/shop/files/81ee53b7eade4c22a1268e1a28879d4e.jpg?v=1757753123&width=645)
![Selleys No More Gaps Bricks Mortar [Charcoal]](http://gluesaustralia.com.au/cdn/shop/files/9300697130310_c74acc80-87eb-4da9-9a5a-2847d2d610ab.png?v=1754711847&width=645)
![Selleys No More Gaps Bricks Mortar [Medium Grey]](http://gluesaustralia.com.au/cdn/shop/files/9300697130327_41339ef1-92ff-417a-bab1-8529f0ee07f6.png?v=1754711845&width=645)
![Selleys No More Gaps Bricks Mortar [Off White]](http://gluesaustralia.com.au/cdn/shop/files/9300697130334_5a88883c-9e8a-4c25-80f6-535ba26ac80d.png?v=1754711844&width=645)
![Selleys No More Gaps Bricks Mortar [Sandstone]](http://gluesaustralia.com.au/cdn/shop/files/9300697130297_4ba0669c-67f5-40d4-9f47-db82307f921f.png?v=1754711842&width=645)
![Selleys No More Gaps Coloured Caulk Sealant 450g [Brilliant White]](http://gluesaustralia.com.au/cdn/shop/files/c306de337e4245d585ba9870c44c5c2b.jpg?v=1757756191&width=645)
![Selleys No More Gaps Coloured Caulk Sealant 450g [Timeless Grey]](http://gluesaustralia.com.au/cdn/shop/files/047808da6e434754b1b4b492e02434e9.jpg?v=1757753116&width=645)
![Selleys No More Gaps Coloured Caulk Sealant 450g [Tranquil Retreat]](http://gluesaustralia.com.au/cdn/shop/files/18cfd18e466f43bab8a6fd2d1eaf4bfd.jpg?v=1757753110&width=645)
![Selleys No More Gaps Exterior & Weatherboard 430g [White]](http://gluesaustralia.com.au/cdn/shop/files/8a8dbfbe2151431e9a3365cd49a9be75.jpg?v=1757753104&width=645)
![Selleys No More Gaps Filler Bathroom and Kitchen [White]](http://gluesaustralia.com.au/cdn/shop/files/c1273312b7d1426c8ba82245f6c8d0de.jpg?v=1757753091&width=645)
![Selleys No More Gaps Filler Sealant Fast Dry [White]](http://gluesaustralia.com.au/cdn/shop/files/da7575e6045648c8aee7c9769b69a8cc.jpg?v=1757753086&width=645)
![Selleys No More Gaps Multipurpose Sealant Filler 150g [White]](http://gluesaustralia.com.au/cdn/shop/files/87cc1e989ee946138f896f38cf05e9d4.jpg?v=1757753073&width=645)
![Selleys No More Gaps Multipurpose Sealant Filler 475g [White]](http://gluesaustralia.com.au/cdn/shop/files/62810ec4c8d842009839ace74d1cac64.png?v=1757753067&width=645)
![Selleys No More Gaps Timber Floors x 380g [Hardwood]](http://gluesaustralia.com.au/cdn/shop/files/5160e944b5d3493cbac2a999232381fa.jpg?v=1757753063&width=645)
![Selleys No More Gaps Timber Floors x 380g [Jarrah]](http://gluesaustralia.com.au/cdn/shop/files/42b566f39b234ffeab320faed408b86e.jpg?v=1757753057&width=645)
![Selleys No More Gaps Timber Floors x 380g [Walnut]](http://gluesaustralia.com.au/cdn/shop/files/169e8e96732544d89fdb6ec6deaba129.jpg?v=1757753052&width=645)
![Selleys No Mould Silicone Sealant Waterproof [White]](http://gluesaustralia.com.au/cdn/shop/files/121994701b5c42c1bd5e5c839bcfcd4e.jpg?v=1757753039&width=645)
![Selleys No Mould Silicone Selant 100ml [Translucent]](http://gluesaustralia.com.au/cdn/shop/files/6fd66b047782417180c9a9563f0917d8.png?v=1757753033&width=645)
![Selleys No Mould Silicone Selant 100ml [White]](http://gluesaustralia.com.au/cdn/shop/files/15eb0d3681e54148ad88ef00e07df55b.png?v=1757753027&width=645)
![Selleys Roof & Gutter Silicone Sealant UV & Weather Resistant 310g [Black]](http://gluesaustralia.com.au/cdn/shop/files/2330c4b4af69418ba74ba7691a5becd0.jpg?v=1757756157&width=645)
