In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Sikasil® Pool Neutral-Cure Silicone Sealant – 300 ml Cartridge
Designed for use in demanding aquatic environments, Sikasil® Pool is a one-part, neutral-curing silicone sealant formulated specifically for swimming pools, wet areas, and permanently submerged joints. With exceptional resistance to chlorinated water, high elasticity, and outstanding fungal resistance, this sealant delivers durable, long-lasting performance.
Key Features
Excellent resistance to chlorinated water and common pool chemicals
Movement accommodation of ± 25 %
Neutral cure — non-corrosive, safe on most metals and tile systems
High elasticity and recovery
Very good resistance to fungal attack
Suitable for interior and exterior applications
Typical Applications
Underwater joints in swimming pools
Wet areas, such as spas, splash zones, and shower recesses
Sealing between tiles, concrete, glass, and metal substrates
Technical Highlights
Service temperature range: –40 °C to +80 °C
Shore A hardness (28 days): ~20
Elastic recovery: > 90%
Typical curing speed: ~2 mm per 24 h
Skinning time: ~5 minutes (23 °C / 50% RH)
Available in White, Grey, and Transparent shades
Shelf life: 15 months (when stored unopened between 5 °C and 25 °C)
Usage & Application Tips
Ensure surfaces are clean, dry, and free from contaminants (oil, dust, grease).
Roughen smooth, non-porous surfaces (e.g. metal, glazed tile) before application.
Use appropriate primers (e.g. Sika Aktivator-205, Primer-3 N) on metals, PVC, or porous substrates as recommended.
Apply a closed-cell foam backing rod to control joint depth.
Insert sealant by cartridge gun, avoiding air entrapment. Tool the bead within the skin formation time.
Allow full cure (minimum 7 days) before filling pool with water.
Limitations & Precautions
This product is not suitable for:
Joints in direct contact with potable food or drink
Overpainting
Use on substrates that leach oils, plasticisers or solvents (e.g. bitumen, EPDM rubber)
Always consult the current Product Data Sheet (PDS) and Safety Data Sheet (SDS) for full technical, safety, and application details before use.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Stanley 12mm 240V Corded Hot Glue Gun 25W
Get clean, reliable bonds for crafts, quick household fixes, packaging, and light DIY with the Stanley 12mm Corded Hot Glue Gun. Its 25W heating element warms up efficiently for steady glue flow, while the compact body and ergonomic trigger deliver comfortable, controlled application on a wide range of surfaces.
Why choose this glue gun
Trusted Stanley build for everyday projects and repairs
Consistent glue output for neat, repeatable results
Easy to handle for beginners and experienced makers
Key features
12 mm glue sticks for great coverage and fewer reloads
25W heating element for steady melt and controlled flow
Ergonomic trigger that reduces hand fatigue on longer runs
Built in stand and nozzle shroud to help keep benches tidy
240V corded power for uninterrupted operation
Great for
Cardboard, paper, fabric, felt, foam, ribbons, and craft materials
Wood trims, light plastics, small fixtures, and packaging
General household touch ups and temporary jigs
How to use
Insert a 12 mm glue stick into the feed port.
Plug into a 240V outlet and allow the tool to preheat. A few minutes is typical.
Gently squeeze the trigger to dispense glue. Apply in small beads or dots.
Press parts together while the adhesive is hot. Hold until initial grab occurs.
Rest the tool on the built in stand when not dispensing. Unplug after use.
Compatibility
Uses standard 12 mm hot melt glue sticks. Works with multi purpose, high tack, wood, and craft grade sticks. For heat sensitive substrates such as very thin plastics or delicate fabrics, test on a small area first.
Specifications
Power
25W
Voltage
240V AC
Glue stick size
12 mm diameter
Nozzle
Precision tip with protective shroud
Stand
Integrated flip down stand
Cord
Mains corded
Typical applications
Crafts, packaging, light repairs
What is in the box
Stanley 25W 12 mm Hot Glue Gun
User guide
Glue sticks sold separately
Helpful tips
Keep the nozzle clean by wiping away stringing while warm using a scrap of cardboard.
For porous materials like fabric or raw timber, apply a slightly thicker bead.
For smoother finishes on visible joints, apply small dots and press evenly.
Safety and care
Hot melt adhesive and nozzle become very hot. Avoid contact with skin.
Use on a stable, heat resistant surface. Keep out of reach of children.
Unplug after use and allow to cool before storage.
FAQ
Q: Can I use smaller mini sticks?
A: This tool is designed for 12 mm sticks. Using other sizes can cause feed issues.
Q: How long do I have to position parts?
A: Open time varies by stick type and temperature. Work quickly and test first on your material.
Note: Always test bond strength and heat suitability on an offcut before full application.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Stanley Mini DualMelt Hot Glue Gun is a reliable compact dual temperature hot glue gun for craft and light repair chosen for home repairs, trade work, and craft builds when you want a bond you can trust. Designed for Australian conditions, it balances strength, ease of use, and clean application so you can get professional results without special tools. The pack is ideal for general work and keeps neatly in a toolbox or caddy.
Why choose Stanley Mini for your next project
Everyday jobs often involve mixed materials and imperfect surfaces. Stanley Mini DualMelt Hot Glue Gun has been formulated to wet out well, grab quickly, and cure to a tough finish that resists movement and contact stress. It maintains bond integrity across common temperature swings and has dependable resistance to moisture and most household chemicals. Whether you are fixing, building, sealing, or assembling, this product gives you confidence from first squeeze through final set.
Best for
Paper craft and floral work
Bonding trims and beads
Quick household fixes that benefit from a fast set
Suitable surfaces
The adhesive works well on the following surface types when properly prepared:
Paper, card, fabric
Timber trim
Plastic compatible with hot melt
Surface preparation
Good preparation is the key to a long lasting repair. Remove loose material, dust, and grease. Wipe glossy areas with methylated spirits or an approved cleaner and allow to dry. On very smooth plastics and metals, lightly roughen with fine abrasive paper to give the adhesive a mechanical key. Dry fit parts first and mark alignment points so you can assemble accurately within the open time. If bonding porous materials, ensure both faces are dry and free of surface chalking.
How to use
Check fit and plan clamping. Do a trial run without adhesive so you know the order of steps.
Apply a thin, continuous bead to one surface. For wide pieces, use a zig zag pattern to maximise wetting.
Bring surfaces together within the stated open time of assemble within seconds of application. Reseat once if needed, then hold steady.
Apply even pressure using clamps, tape, weights, or temporary fasteners. Avoid squeezing all adhesive out of the joint.
Allow to cure undisturbed. Initial handling strength will develop as the adhesive sets, with a full cure reached based on the chemistry described below.
Cure profile
Low temp setting helps with delicate materials. High temp setting increases flow and tack for wood and rigid plastics.
Temperature and environmental performance
Operate in dry indoor conditions. Avoid application to very cold, sweating, or waterlogged surfaces. For outdoor use protect fresh bonds from rain until the skin has formed and the core has progressed in cure. Once fully cured, the bond resists normal weathering, splash water, and intermittent UV exposure based on the substrate and paint systems used.
Clean up and finishing
Remove stray strings when cool. Use a silicone mat to catch drips. When cured, excess can be carefully trimmed or sanded. For painted finishes, allow the adhesive to fully cure before priming. Test paint on a small area to confirm compatibility and drying behaviour.
Coverage guide
Coverage varies with bead size, surface porosity, and technique. As a general guide, a 3 mm bead yields approximately 10 to 12 linear meters per 310 mL cartridge. Smaller packs scale proportionally. Gaps, rough edges, and highly absorbent materials will reduce coverage. Plan an extra margin for offcuts and practice passes.
Tips for best results
Work within the recommended open time so the adhesive can properly wet the surfaces.
Use light clamping pressure to keep parts aligned while maintaining a film thickness for strength.
For very porous substrates, apply a thin precoat as a primer layer and allow it to tack before final assembly.
Keep joint lines clean by masking edges with painter tape and removing it before the adhesive skins.
Where movement or vibration is expected, design the joint to share load across a large area.
Troubleshooting
Poor adhesion: Check for oil, release agents, or surface dust. Reclean and lightly abrade if necessary.
Slow cure: Low temperature and low humidity extend cure time. Maintain moderate conditions for best results.
Visible squeeze out: Wipe fresh material with a suitable solvent and a soft cloth. Once cured, trim carefully.
Bond line prints through paint: Allow a full cure, then prime and apply thin coats of paint, allowing proper drying between coats.
Storage and shelf life
Switch off and cool before storing. Keep sticks clean and dry. Always check the pack for a lot code and use by guidance. Reseal immediately after use and store upright. Dispose of empty containers responsibly.
Safety
Read the label before use. Wear gloves when handling uncured material. Provide ventilation in enclosed areas. Avoid contact with skin and eyes. Keep out of reach of children and pets. If sensitivity occurs, stop use and seek advice. Do not ingest. First aid directions and detailed handling information are available on the package and the safety data sheet.
Frequently asked questions
Can I bond dissimilar materials? Yes, provided each surface is clean and sound. Differences in expansion are managed by the adhesive film thickness and the inherent flexibility after cure.
Is clamping required? Light clamping improves alignment and final strength. Excessive pressure can starve the joint of adhesive which reduces performance.
Is the bond water resistant? Once cured the bond resists splash water and routine humidity. For permanent immersion choose an adhesive designed for underwater service and follow the manufacturer guidance.
Planning your job
Measure twice and cut once. Dry assemble parts so you can confirm squareness and alignment before adhesive is involved. Keep rags, clamps, and spacers ready. If you are new to the product, test on offcuts to get a feel for bead size and squeeze out. A consistent 1 to 2 mm bond line is a good starting point for most rigid materials. Thicker lines help when surfaces are uneven. Avoid starving the joint by pressing too hard without giving the adhesive a place to reside.
Responsible use
Choose an adhesive that suits the materials and the environment the finished piece will face. If a joint will be submerged, carry structural loads, or be exposed to strong chemicals, check the technical data sheet for specific guidance. Many general purpose products are perfect for day to day work, while specialised tasks call for a system designed and tested for that environment. Using the right product first saves time, money, and rework.
Aftercare and maintenance
Adhesive joints are remarkably strong when used correctly. Design repairs so that routine loads are shared across a generous area. Where heavy vibration is present, pair the adhesive bond with appropriate mechanical fasteners. Keep cleaning chemicals mild, and avoid abrasive pads on visible joints. If a bond will be repainted, choose flexible paint where movement is expected, and keep edges sealed to prevent dirt tracking along the bond line.
Recycling and disposal
Allow empty containers to cure before disposal. Check local council guidance for recycling of plastics and metal cartridges. Never pour uncured product into drains or soil. Wipe tools on scrap material and let residue harden before placing in general waste. Smart handling keeps the workspace clean and reduces environmental impact.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Sugru is a Multi-Purpose, Mouldable Glue for fixing, Bonding and DIY
Mouldable
Out of the pack, Sugru Mouldable Glues are designed to feel soft and malleable like play-dough. Roll the material in your fingers. Press it where you need it, and mould it by hand into any shape. From an ultra-thin patch to a shock-absorbing bumper, you have 30 minutes to shape it, smooth it, and reposition it as required.
Flexible
Leave for 24 hours. Thanks to some clever science and advanced technologies, Sugru Mouldable Glues react at room temperature, simply on exposure to air. They crosslink into strong, flexible and tactile silicone rubbers overnight. Sugru Mouldable Glues will flex with the materials they're applied to, so you can fix things that need to bend. They work like nothing else on leathers, fabrics or flexible plastics.
Waterproof & Durable
Once cured, Sugru Mouldable Glues are waterproof and long-lasting, just like other silicone rubbers. So you can use them in challenging environments like wet bathrooms, shower and sink areas – even outdoors with long-term exposure to the sun, sea and other weather conditions.
Multi-Material
Sticks permanently to lots of materials like glass, ceramic, wood, metal and plastics*.
Strong
Once cured, it stays in its shape permanently and will remain bonded, often for years to come.
Holds Up to 2KG/4.4LB
Ensure surfaces are clean and dry. A 5g/.17oz single-use pack can hold up to 400x its own weight.
Heat and Cold Resistant
Comfortable at high and low temperatures up to 180°C (356°F) and down to -50°C (-58°F).
Durable
Flexibility combined with strong adhesion ensures that your fixes don’t become brittle or crack.
Waterproof
Ensure surfaces are dry before use. It can even be used for sealing applications indoors and out.
Flexible
The thickness of your fix will determine its ultimate flexibility, a thin layer will deliver maximum flex.
Shock Resistant
Excellent dampening properties can deliver vibration resistance and shock protection.
Insulating
Like other silicones, it has good thermal and electrical insulation properties**.
Weatherproof
Excellent ozone and UV resistance. Only slight fading after years in direct sunlight.
Stick It
Sugru sticks permanently to lots of materials like glass, ceramic, wood, metal and plastics*.
Mould It
You have 30 minutes to fix, build and create.
Sets Strong
In 24 hours, it turns into a strong and durable silicone rubber that stays stuck.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Get a clean, hardware free look with T-Rex Clear Double Sided Tape. This high performance clear mounting tape creates a strong, permanent bond for photos, hooks, cable clips, house numbers, trims, and light decor. It is ideal when you want the hold without the hardware and a finish that stays virtually invisible on glass, tiles, metal, and painted walls.
Why you will love it
Crystal clear finish that helps hide the fix for a neat result
Strong permanent bond for everyday mounting and craft projects
Moisture and UV resistant construction for long lasting performance
Instant stick with pressure activation, no curing time required
No tools needed, peel and stick application
Great for
Mounting signage, house numbers, and name plates
Securing cable clips and small hooks
Fixing splashback trim and edging
Crafts, scrapbooking, and photo boards
Temporary holding during light assembly
Works on
Glass and mirrors
Glazed tiles and ceramics
Metal, aluminium, and stainless steel
Finished timber and laminate
Painted walls that are sound, clean, and fully cured
Most rigid plastics except low surface energy plastics
Note: Not recommended for wallpaper, delicate or dusty surfaces, or low surface energy plastics such as PE, PP, and PTFE. Always test on a small area first.
How to use
Prepare the surface. Clean with isopropyl alcohol and let dry. Remove dust, grease, and loose paint.
Apply tape. Cut to length. Apply tape to the lightest item first. Press firmly along the whole strip.
Peel liner. Remove the protective liner without touching the adhesive.
Mount. Position carefully. Press firmly for 30 to 60 seconds to activate the bond. Maximum strength develops with time under steady pressure.
Removal tips
Warm gently and peel back slowly at a low angle
Use adhesive remover to clean any residue on robust surfaces
Avoid pulling straight out from the wall to reduce risk of paint lift
Specifications
Brand
T-Rex
Product type
Clear double sided mounting tape
Width
19 mm
Length
4.5 m
Colour
Clear
Adhesive
Acrylic based
Indoor or outdoor
Indoor and protected outdoor applications
Liner
Peel off release film
Good to know
For best results on painted walls, ensure paint is fully cured
Heavier items may need additional strips to spread the load
Use continuous strips near the edges of flat panels to reduce shear
What is in the pack
1 x roll T-Rex Clear Double Sided Tape 19 mm x 4.5 m
FAQs
Can I use it in wet areasYes for sealed, smooth surfaces such as glazed tiles and glass. Avoid constant immersion.
Will it damage paintIt can if paint is weak or not fully cured. Test first and remove slowly with heat to soften the adhesive.
Can it hold shelvesThis tape is ideal for light mounting and trim. Use mechanical fixings for shelves and heavy items.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Experience unmatched strength and durability with our T-Rex Ferociously Strong Tape, now available at Glues Australia. Measuring 9.14 meters in length, this tape is specifically designed to withstand the toughest situations and most demanding projects.
Crafted for homeowners, craftsmen, and outdoor enthusiasts, T-Rex® Tape distinguishes itself from ordinary duct tapes with its formidable holding power. This makes it your go-to solution for enduring repairs, creative DIY projects, or any challenging task you encounter. The secret to its exceptional performance lies in its aggressive double-thick adhesive. This feature allows the tape to adhere firmly to rough, dirty surfaces in all types of weather and temperature conditions.
T-Rex® Tape is more than just a tool; it's a reliable partner for both home use and professional job sites. It outlasts and outperforms regular duct tape, ensuring that your projects, big or small, are held together longer and stronger.
Key Features:
All-Weather Capabilities: Equipped with a waterproof backing, T-Rex® Tape stands resilient against harsh weather elements, even in the coldest temperatures. This feature makes it an ideal choice for outdoor repairs and applications.
Enhanced Durability: The tape boasts a high-tensile woven scrim, contributing to its strength and long-lasting nature. Whether it’s used for heavy-duty tasks or simple fixes, the tape’s robust construction ensures it won’t give in.
Superior Holding Power: With its double-thick adhesive, T-Rex® Tape grips onto rough and uneven surfaces with unparalleled strength. This makes it perfect for tasks that require a strong, reliable hold.
Versatile Usage: Suitable for both indoor and outdoor environments, the tape is manufactured using UV-resistant materials. These materials prevent the tape’s adhesive from weakening under harsh UV rays, extending its lifespan.
Wide Application Range: T-Rex® Tape is versatile enough to be used on a variety of surfaces, including brick, concrete, shingles, both painted and non-painted wood, and vinyl siding. This makes it a must-have in any toolbox.
Heavy-Duty Construction: Made with a heavy-duty knit cloth, the tape is designed for long-lasting repairs or applications. Whether it's for a temporary fix or a permanent solution, you can count on its reliability.
Usage Applications:
Home repairs, including fixing broken items and sealing leaks.
Crafting and DIY projects, offering creative flexibility.
Outdoor applications, including camping gear repairs.
Professional job site tasks, providing reliability and strength.
Why Choose T-Rex® Tape?
When you choose T-Rex® Tape, you're not just selecting a tape; you're choosing a commitment to excellence and reliability. Its unique composition allows it to withstand challenges that ordinary tapes can't handle. Whether you're a professional tradesperson or a DIY enthusiast, T-Rex® Tape is the perfect addition to your toolkit, providing a strong, durable solution for any project.
In conclusion, T-Rex® Tape is not just tape; it's a symbol of strength, resilience, and versatility. Its all-weather, UV-resistant features, combined with its superior adhesive strength, make it an indispensable product for anyone who values quality and reliability in their tools. Available now at Glues Australia – your trusted source for high-quality adhesive solutions.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
T-Rex® Ferociously Strong Waterproof Tape provides tough waterproof adhesion under wet and dry conditions. Built with R-Flex Technology™, T-Rex Waterproof Tape can stretch up to 700% of its original length. It’s strong enough to be used for general purpose indoor or outdoor fixes that require a waterproof seal, like repairing a rip in an above-ground pool or temporarily stopping a leak in a water pipe. Or, apply it underwater and push it into cracks and rough, dirty surfaces. Formulated to withstand extreme temperatures from -56C to 93C., its UV-resistant formulation won’t break down under harsh sunlight. T-Rex Waterproof Tape. Flexible, ferociously strong, and waterproof like no other.
Features
Waterproof backing enhanced with R-Flex Technology™ for greater durability
Can be used underwater
UV resistant
All-weather: withstands temperatures from -56C to 93C.
WATERPROOF ADHESION
Extra thick butyl-based adhesive means durable repairs, even under water.
T-Rex® Ferociously Strong Waterproof Tape provides tough waterproof adhesion under wet and dry conditions. Built with R-Flex Technology™, T-Rex Waterproof Tape can stretch up to 700% of its original length. It’s strong enough to be used for general purpose indoor or outdoor fixes that require a waterproof seal, like repairing a rip in an above-ground pool or temporarily stopping a leak in a water pipe. Or, apply it underwater and push it into cracks and rough, dirty surfaces. Formulated to withstand extreme temperatures from -56C to 93C., its UV-resistant formulation won’t break down under harsh sunlight. T-Rex Waterproof Tape. Flexible, ferociously strong, and waterproof like no other.
FEATURES:
Waterproof backing enhanced with R-Flex Technology™ for greater durability
Can be used underwater
UV resistant
All-weather: withstands temperatures from -56C to 93C.
WATERPROOF ADHESION
Extra thick butyl-based adhesive means durable repairs, even under water.
R-FLEX TECHNOLOGY
Durable, flexible and UV resistant backing for long lasting repairs.
ALL WEATHER
Waterproof and built to withstand extreme temperatures from -56C to 93C.
Durable, flexible and UV resistant backing for long lasting repairs.
ALL WEATHER
Waterproof and built to withstand extreme temperatures from -56C to 93C.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
T-Rex® Ferociously Strong Waterproof Tape provides tough waterproof adhesion under wet and dry conditions. Built with R-Flex Technology™, T-Rex Waterproof Tape can stretch up to 700% of its original length. It’s strong enough to be used for general purpose indoor or outdoor fixes that require a waterproof seal, like repairing a rip in an above-ground pool or temporarily stopping a leak in a water pipe. Or, apply it underwater and push it into cracks and rough, dirty surfaces. Formulated to withstand extreme temperatures from -56C to 93C., its UV-resistant formulation won’t break down under harsh sunlight. T-Rex Waterproof Tape. Flexible, ferociously strong, and waterproof like no other.
Features
Waterproof backing enhanced with R-Flex Technology™ for greater durability
Can be used underwater
UV resistant
All-weather: withstands temperatures from -56C to 93C.
WATERPROOF ADHESION
Extra thick butyl-based adhesive means durable repairs, even under water.
T-Rex® Ferociously Strong Waterproof Tape provides tough waterproof adhesion under wet and dry conditions. Built with R-Flex Technology™, T-Rex Waterproof Tape can stretch up to 700% of its original length. It’s strong enough to be used for general purpose indoor or outdoor fixes that require a waterproof seal, like repairing a rip in an above-ground pool or temporarily stopping a leak in a water pipe. Or, apply it underwater and push it into cracks and rough, dirty surfaces. Formulated to withstand extreme temperatures from -56C to 93C., its UV-resistant formulation won’t break down under harsh sunlight. T-Rex Waterproof Tape. Flexible, ferociously strong, and waterproof like no other.
FEATURES:
Waterproof backing enhanced with R-Flex Technology™ for greater durability
Can be used underwater
UV resistant
All-weather: withstands temperatures from -56C to 93C.
WATERPROOF ADHESION
Extra thick butyl-based adhesive means durable repairs, even under water.
R-FLEX TECHNOLOGY
Durable, flexible and UV resistant backing for long lasting repairs.
ALL WEATHER
Waterproof and built to withstand extreme temperatures from -56C to 93C.
Durable, flexible and UV resistant backing for long lasting repairs.
ALL WEATHER
Waterproof and built to withstand extreme temperatures from -56C to 93C.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Fast, tough and tidy. This bright white duct tape delivers a strong hold for patching, bundling, sealing and quick fixes indoors and outdoors. It tears by hand for easy application and leaves a clean look on light surfaces.
Strong hold for everyday repairs and jobsite tasks
Weather resistant backing that helps shed moisture
UV resistant colour that stays bright in the sun
Hand tear across or along the roll for fast use
Conforms to rough, uneven and curved surfaces
Clean white finish blends with trim, appliances and walls
Great for
Sealing and patching around the home, site and shed
Temporary cable bundling and gear organisation
Quick fixes on tools, hoses, tarps and camping gear
Labelling and marking on light coloured surfaces
Craft, props and event setups where a white finish is preferred
Surface Compatibility
Adheres to most clean, dry surfaces including metal, plastic, painted timber, vinyl, glass, masonry, cardboard and fabric. Not recommended on freshly painted walls, delicate finishes, porous stone or where residue free removal is essential.
How to Use
Clean and dry the surface. Remove dust, oil and loose flakes.
Unroll and press the tape down firmly as you go to avoid air pockets.
For heavy duty holds, wrap or overlap the tape to increase grip.
To remove, lift a corner and peel back slowly at a low angle.
Pro Tips
At cooler temperatures, warm the tape and surface for best tack.
For long term outdoor use, apply to smooth, sealed surfaces.
Test first on sensitive areas to check finish and removal.
Specifications
Brand
T-Rex
Product type
Duct tape
Colour
White
Width
48 mm
Length
9.1 m
Use
Indoor and outdoor
Finish
Matte white
What is in the Box
1 x Roll of T-Rex White Duct Tape 48 mm x 9.1 m
Frequently Asked Questions
Will it hold in the rain?The backing helps resist moisture and the adhesive bonds well to dry, prepared surfaces. Apply to a clean, dry surface for best results.
Is it paintable?Many users paint over duct tape for temporary cosmetics. For the best finish, use a suitable primer and test first.
Will it leave residue?Like most strong duct tapes, residue can occur, especially after long exposure to heat and sun. Test on sensitive finishes and remove slowly.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
The Tactix 25L Collapsible Storage Crate is a must-have for anyone looking to declutter their space easily and efficiently. Built from high-quality, durable plastic, this crate can hold up to 25 liters of tools, groceries, office supplies, or outdoor equipment, making it ideal for a wide range of uses. The crate’s collapsible design allows it to fold flat for easy storage when not in use, saving valuable space in your home, garage, office, or vehicle.
Whether you're organizing your garage, transporting work tools, or keeping your office supplies tidy, the Tactix 25L crate offers the perfect balance of strength and convenience. The ergonomic handles make it easy to carry, while its lightweight yet sturdy construction ensures long-lasting use. Use it to store gardening tools, sports gear, or even camping essentials—it’s perfect for both indoor and outdoor applications.
When you purchase from Glues Australia, you not only get premium products like the Tactix Collapsible Crate but also exceptional customer service. With fast delivery and a dedicated team ready to assist, we ensure a seamless shopping experience. Shop with confidence knowing you’re backed by Australia’s trusted adhesive and storage experts.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Tarzan's Grip 5min Epoxy is a two-part all purpose adhesive. When mixed equally together it provides a tough, rigid, high strength bond to tackle the toughest DIY projects. Its also fast - sets in 5 minutes and reaches initial handling strength in 30 minutes.
Easy mix
Durable bond
Dries clear
Water resistant
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Tarzan’s Grip new formulation is a clear, flexible, general purpose solvent-based adhesive for household and hobby uses.
An all-purpose glue which bonds almost everything
Grabs in minutes - the exact "grab time" depends on the surfaces to be joined
Fast drying
Water resistant
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Tarzan's Grip Mounting Tape is a double sided, heavy duty, high strength tape that instantly grabs for easy, fast and permanent mounting.
It is ideal for a multitude of surfaces, including metal, wood, rubber, leather, china, brick, stone, plasterboard and most plastics.
Extremely strong
Instant grab
Solvent free
Permanent
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Tarzan’s Grip Super Glue is a fast-setting cyanoacrylic acid ester based adhesive. Tarzan's Grip Super Glue dries colourless.
Special multi-purpose formula allows product to bond to a variety of surfaces
Quick-setting
Dries clear, therefore no mess
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Tarzan's Grip Wood Glue is a fast, dependable PVA timber adhesive built for everyday woodworking and repairs around the home and workshop. This 250mL bottle delivers a strong, lasting bond on a wide range of timbers, making it a reliable choice for cabinetry, joinery, furniture assembly and general carpentry jobs.
The water-based PVA formula spreads smoothly, penetrates porous timber and sets to a tough, near-invisible bond line. Its extended working time gives you room to align and clamp pieces accurately before the glue grabs, while easy water clean-up keeps the job tidy with no harsh solvents.
What it bondsIdeal for softwoods, hardwoods, plywood and MDF, and well suited to bonding porous materials to one another.
Where to use itIndoor / Interior: furniture making and repair, cabinet and drawer assembly, joinery, trim and moulding, hobby and craft woodwork.Outdoor: this is an interior-grade wood glue and is not intended for fully weather-exposed or submerged applications.
How to use it
Make sure both surfaces are clean, dry and free of dust, grease and old finish.
Apply an even coat of glue to one or both mating surfaces.
Bring the parts together, align, and clamp firmly.
Wipe away any squeeze-out with a damp cloth before it dries.
Leave clamped until set, then allow full cure before stressing the joint.
Important notesFor interior use only. Not classified as hazardous or as a dangerous good. Keep the cap closed between uses and store upright. Best results on clean, well-fitted joints with adequate clamping pressure.
Specifications
Brand
Tarzan's Grip
Product
Wood Glue (PVA)
Size
250mL
Form
Liquid
Colour
Light yellow
Base
Water-based PVA
Density
1.05 g/cm³
pH
3.5 - 4.5
Clean up
Water (while wet)
Suitable for
Softwoods, hardwoods, plywood, MDF
Use area
Interior
SafetyBased on available information this product is not classified as hazardous under Safe Work Australia GHS criteria, and is not classified as a Dangerous Good for transport. Avoid eye contact and repeated or prolonged skin contact, and avoid inhaling mist or vapour. Wash hands after use and keep away from food and drink. If in eyes, rinse immediately with water; if swallowed, rinse mouth, do not induce vomiting, and seek medical advice. Store in a cool, dry, well-ventilated place out of direct sunlight and away from heat or ignition sources. Keep out of reach of children. Refer to the manufacturer's current Safety Data Sheet for full handling guidance.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Tarzan’s Grip Fast-Set 5 Minute Epoxy Adhesive 24 mL is a reliable two part fast setting epoxy adhesive for durable repairs chosen for home repairs, trade work, and craft builds when you want a bond you can trust. Designed for Australian conditions, it balances strength, ease of use, and clean application so you can get professional results without special tools. The 24 mL pack is ideal for general work and keeps neatly in a toolbox or caddy.
Why choose Tarzan's Grip Grip for your next project
Everyday jobs often involve mixed materials and imperfect surfaces. Tarzan’s Grip Fast-Set 5 Minute Epoxy Adhesive 24 mL has been formulated to wet out well, grab quickly, and cure to a tough finish that resists movement and contact stress. It maintains bond integrity across common temperature swings and has dependable resistance to moisture and most household chemicals. Whether you are fixing, building, sealing, or assembling, this product gives you confidence from first squeeze through final set.
Best for
Household and workshop repairs that need speed and strength
Fixing fixtures, brackets, and hardware
Filling chips and rebuilding small edges before sanding
Suitable surfaces
The adhesive works well on the following surface types when properly prepared:
Metal hardware
Ceramic tiles
Most rigid plastics except polyethylene and polypropylene
Timber and MDF
Stone and concrete
Surface preparation
Good preparation is the key to a long lasting repair. Remove loose material, dust, and grease. Wipe glossy areas with methylated spirits or an approved cleaner and allow to dry. On very smooth plastics and metals, lightly roughen with fine abrasive paper to give the adhesive a mechanical key. Dry fit parts first and mark alignment points so you can assemble accurately within the open time. If bonding porous materials, ensure both faces are dry and free of surface chalking.
How to use
Check fit and plan clamping. Do a trial run without adhesive so you know the order of steps.
Apply a thin, continuous bead to one surface. For wide pieces, use a zig zag pattern to maximise wetting.
Bring surfaces together within the stated open time of 3 to 5 minutes working time. Reseat once if needed, then hold steady.
Apply even pressure using clamps, tape, weights, or temporary fasteners. Avoid squeezing all adhesive out of the joint.
Allow to cure undisturbed. Initial handling strength will develop as the adhesive sets, with a full cure reached based on the chemistry described below.
Cure profile
Initial set is reached in about 5 minutes at 23 C. Sandable after several hours. Achieves high final strength after a full overnight cure.
Temperature and environmental performance
Performs well across typical domestic temperature ranges after cure. Avoid application to very cold, sweating, or waterlogged surfaces. For outdoor use protect fresh bonds from rain until the skin has formed and the core has progressed in cure. Once fully cured, the bond resists normal weathering, splash water, and intermittent UV exposure based on the substrate and paint systems used.
Clean up and finishing
Clean uncured excess with acetone on a cloth. Use care on painted substrates. When cured, excess can be carefully trimmed or sanded. For painted finishes, allow the adhesive to fully cure before priming. Test paint on a small area to confirm compatibility and drying behaviour.
Coverage guide
Coverage varies with bead size, surface porosity, and technique. As a general guide, a 3 mm bead yields approximately 10 to 12 linear meters per 310 mL cartridge. Smaller packs scale proportionally. Gaps, rough edges, and highly absorbent materials will reduce coverage. Plan an extra margin for offcuts and practice passes.
Tips for best results
Work within the recommended open time so the adhesive can properly wet the surfaces.
Use light clamping pressure to keep parts aligned while maintaining a film thickness for strength.
For very porous substrates, apply a thin precoat as a primer layer and allow it to tack before final assembly.
Keep joint lines clean by masking edges with painter tape and removing it before the adhesive skins.
Where movement or vibration is expected, design the joint to share load across a large area.
Troubleshooting
Poor adhesion: Check for oil, release agents, or surface dust. Reclean and lightly abrade if necessary.
Slow cure: Low temperature and low humidity extend cure time. Maintain moderate conditions for best results.
Visible squeeze out: Wipe fresh material with a suitable solvent and a soft cloth. Once cured, trim carefully.
Bond line prints through paint: Allow a full cure, then prime and apply thin coats of paint, allowing proper drying between coats.
Storage and shelf life
Keep sealed to prevent crystallisation. Store upright at moderate temperature. Always check the pack for a lot code and use by guidance. Reseal immediately after use and store upright. Dispose of empty containers responsibly.
Safety
Read the label before use. Wear gloves when handling uncured material. Provide ventilation in enclosed areas. Avoid contact with skin and eyes. Keep out of reach of children and pets. If sensitivity occurs, stop use and seek advice. Do not ingest. First aid directions and detailed handling information are available on the package and the safety data sheet.
Frequently asked questions
Can I bond dissimilar materials? Yes, provided each surface is clean and sound. Differences in expansion are managed by the adhesive film thickness and the inherent flexibility after cure.
Is clamping required? Light clamping improves alignment and final strength. Excessive pressure can starve the joint of adhesive which reduces performance.
Is the bond water resistant? Once cured the bond resists splash water and routine humidity. For permanent immersion choose an adhesive designed for underwater service and follow the manufacturer guidance.
Planning your job
Measure twice and cut once. Dry assemble parts so you can confirm squareness and alignment before adhesive is involved. Keep rags, clamps, and spacers ready. If you are new to the product, test on offcuts to get a feel for bead size and squeeze out. A consistent 1 to 2 mm bond line is a good starting point for most rigid materials. Thicker lines help when surfaces are uneven. Avoid starving the joint by pressing too hard without giving the adhesive a place to reside.
Responsible use
Choose an adhesive that suits the materials and the environment the finished piece will face. If a joint will be submerged, carry structural loads, or be exposed to strong chemicals, check the technical data sheet for specific guidance. Many general purpose products are perfect for day to day work, while specialised tasks call for a system designed and tested for that environment. Using the right product first saves time, money, and rework.
Aftercare and maintenance
Adhesive joints are remarkably strong when used correctly. Design repairs so that routine loads are shared across a generous area. Where heavy vibration is present, pair the adhesive bond with appropriate mechanical fasteners. Keep cleaning chemicals mild, and avoid abrasive pads on visible joints. If a bond will be repainted, choose flexible paint where movement is expected, and keep edges sealed to prevent dirt tracking along the bond line.
Recycling and disposal
Allow empty containers to cure before disposal. Check local council guidance for recycling of plastics and metal cartridges. Never pour uncured product into drains or soil. Wipe tools on scrap material and let residue harden before placing in general waste. Smart handling keeps the workspace clean and reduces environmental impact.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Tarzan’s Grip Multi-Purpose General Adhesive 250 g is a reliable versatile contact style adhesive for crafts and household fixes chosen for home repairs, trade work, and craft builds when you want a bond you can trust. Designed for Australian conditions, it balances strength, ease of use, and clean application so you can get professional results without special tools. The 250 g pack is ideal for general work and keeps neatly in a toolbox or caddy.
Why choose Tarzan's Grip Grip for your next project
Everyday jobs often involve mixed materials and imperfect surfaces. Tarzan’s Grip Multi-Purpose General Adhesive 250 g has been formulated to wet out well, grab quickly, and cure to a tough finish that resists movement and contact stress. It maintains bond integrity across common temperature swings and has dependable resistance to moisture and most household chemicals. Whether you are fixing, building, sealing, or assembling, this product gives you confidence from first squeeze through final set.
Best for
Bonding fabric, leather, and rubber
General craft builds
Light repairs around the home
Suitable surfaces
The adhesive works well on the following surface types when properly prepared:
Leather and canvas
Rubber trim
Timber and some plastics
Card and foam board
Surface preparation
Good preparation is the key to a long lasting repair. Remove loose material, dust, and grease. Wipe glossy areas with methylated spirits or an approved cleaner and allow to dry. On very smooth plastics and metals, lightly roughen with fine abrasive paper to give the adhesive a mechanical key. Dry fit parts first and mark alignment points so you can assemble accurately within the open time. If bonding porous materials, ensure both faces are dry and free of surface chalking.
How to use
Check fit and plan clamping. Do a trial run without adhesive so you know the order of steps.
Apply a thin, continuous bead to one surface. For wide pieces, use a zig zag pattern to maximise wetting.
Bring surfaces together within the stated open time of allow adhesive to tack before assembly as directed on pack. Reseat once if needed, then hold steady.
Apply even pressure using clamps, tape, weights, or temporary fasteners. Avoid squeezing all adhesive out of the joint.
Allow to cure undisturbed. Initial handling strength will develop as the adhesive sets, with a full cure reached based on the chemistry described below.
Cure profile
Forms a tough, flexible bond after solvent evaporation and cure. Press parts together firmly for best adhesion.
Temperature and environmental performance
Keep away from flames and high heat during application. Once cured, it resists typical temperatures. Avoid application to very cold, sweating, or waterlogged surfaces. For outdoor use protect fresh bonds from rain until the skin has formed and the core has progressed in cure. Once fully cured, the bond resists normal weathering, splash water, and intermittent UV exposure based on the substrate and paint systems used.
Clean up and finishing
Use appropriate solvent on uncured adhesive, working in a ventilated space. When cured, excess can be carefully trimmed or sanded. For painted finishes, allow the adhesive to fully cure before priming. Test paint on a small area to confirm compatibility and drying behaviour.
Coverage guide
Coverage varies with bead size, surface porosity, and technique. As a general guide, a 3 mm bead yields approximately 10 to 12 linear meters per 310 mL cartridge. Smaller packs scale proportionally. Gaps, rough edges, and highly absorbent materials will reduce coverage. Plan an extra margin for offcuts and practice passes.
Tips for best results
Work within the recommended open time so the adhesive can properly wet the surfaces.
Use light clamping pressure to keep parts aligned while maintaining a film thickness for strength.
For very porous substrates, apply a thin precoat as a primer layer and allow it to tack before final assembly.
Keep joint lines clean by masking edges with painter tape and removing it before the adhesive skins.
Where movement or vibration is expected, design the joint to share load across a large area.
Troubleshooting
Poor adhesion: Check for oil, release agents, or surface dust. Reclean and lightly abrade if necessary.
Slow cure: Low temperature and low humidity extend cure time. Maintain moderate conditions for best results.
Visible squeeze out: Wipe fresh material with a suitable solvent and a soft cloth. Once cured, trim carefully.
Bond line prints through paint: Allow a full cure, then prime and apply thin coats of paint, allowing proper drying between coats.
Storage and shelf life
Replace cap after each use to reduce skinning. Store below 30 C. Always check the pack for a lot code and use by guidance. Reseal immediately after use and store upright. Dispose of empty containers responsibly.
Safety
Read the label before use. Wear gloves when handling uncured material. Provide ventilation in enclosed areas. Avoid contact with skin and eyes. Keep out of reach of children and pets. If sensitivity occurs, stop use and seek advice. Do not ingest. First aid directions and detailed handling information are available on the package and the safety data sheet.
Frequently asked questions
Can I bond dissimilar materials? Yes, provided each surface is clean and sound. Differences in expansion are managed by the adhesive film thickness and the inherent flexibility after cure.
Is clamping required? Light clamping improves alignment and final strength. Excessive pressure can starve the joint of adhesive which reduces performance.
Is the bond water resistant? Once cured the bond resists splash water and routine humidity. For permanent immersion choose an adhesive designed for underwater service and follow the manufacturer guidance.
Planning your job
Measure twice and cut once. Dry assemble parts so you can confirm squareness and alignment before adhesive is involved. Keep rags, clamps, and spacers ready. If you are new to the product, test on offcuts to get a feel for bead size and squeeze out. A consistent 1 to 2 mm bond line is a good starting point for most rigid materials. Thicker lines help when surfaces are uneven. Avoid starving the joint by pressing too hard without giving the adhesive a place to reside.
Responsible use
Choose an adhesive that suits the materials and the environment the finished piece will face. If a joint will be submerged, carry structural loads, or be exposed to strong chemicals, check the technical data sheet for specific guidance. Many general purpose products are perfect for day to day work, while specialised tasks call for a system designed and tested for that environment. Using the right product first saves time, money, and rework.
Aftercare and maintenance
Adhesive joints are remarkably strong when used correctly. Design repairs so that routine loads are shared across a generous area. Where heavy vibration is present, pair the adhesive bond with appropriate mechanical fasteners. Keep cleaning chemicals mild, and avoid abrasive pads on visible joints. If a bond will be repainted, choose flexible paint where movement is expected, and keep edges sealed to prevent dirt tracking along the bond line.
Recycling and disposal
Allow empty containers to cure before disposal. Check local council guidance for recycling of plastics and metal cartridges. Never pour uncured product into drains or soil. Wipe tools on scrap material and let residue harden before placing in general waste. Smart handling keeps the workspace clean and reduces environmental impact.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
The Buzz Indoor Pest Glue Traps 4 Pack
Keep your home clean and comfortable with easy to use, non toxic glue traps that catch crawling pests fast. Each trap folds into a low profile tunnel that protects the sticky surface from dust and keeps pets and little hands away. No sprays, no odour, no mess.
Key benefits
Ready to use traps for ants, cockroaches, spiders, earwigs, silverfish and other crawling insects
Pesticide free adhesive with long lasting tack
Foldable tunnel design for discreet placement
Works in kitchens, laundries, pantries, wardrobes, garages and under sinks
Disposable after use to maintain hygiene
What's included
4 x foldable indoor pest glue traps
Where to place
Along skirting boards and wall edges where insects travel
Near rubbish bins, pet feeding areas and under appliances
Inside cupboards, pantries and storage rooms
Entry points such as doorways and around plumbing penetrations
How to use
Remove a trap from the pack and peel back the protective release paper to expose the glue surface.
Fold along the marked lines to form a tunnel or leave flat if preferred.
Place with the openings along walls or in corners. For best results use multiple traps in larger rooms.
Check weekly. Replace when the surface is covered with dust or insects, or after 4 to 6 weeks.
Pro tips
Reduce competing food sources by wiping crumbs and storing food in sealed containers.
Use additional traps near known pest hotspots for faster control.
Combine with sealing of gaps and cracks for long term prevention.
Disposal and safety
To dispose, fold the trap closed so the adhesive is covered and place in household rubbish.
Keep out of reach of children and pets. If glue contacts skin, remove with cooking oil then wash with soap and water.
Good to know
Indoor use only. Replace regularly for continuous monitoring and control.
Scent free design suits food preparation and storage areas.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Quick Setting Single Use Epoxy Adhesive is the perfect product to use when you need to get your project pieces in place fast. This product sets in only 5 minutes.
Pacer Technology Super Glue Quick Setting Epoxy (SY-QS, SYQS8, T-QS, 15250, 15350) works best on:
All-Purpose
Ceramic
Metal
Pottery
Wood
Tile
Crafts
Fabric
Properties:
Initial colour: Clear hazy to light yellow
Final colour: Light yellow
Set Time: 4-6 minutes @ 65-80F
Handling Time: After 30 minutes
Full Strength: 24 hours
Maximum Gap:25"
Hardness, Shore D: 75-83 (After full cure)
Shear Strength, Steel: 1200 psi ( 20%)
Operating Temperature Range: -40oF to +176oF (-40oC to +80oC)
Use:
1. Surfaces should be clean and dry, free of oil and grease.
2. Roughen surfaces with emery cloth or sandpaper for best results.
3. Dispense from containers following package directions and mix thoroughly approximately 1 minute.
4. Apply mixed epoxy to both surfaces and mate parts together.
5. Remove excess epoxy immediately with denatured alcohol.
6. Sets in 4-6 minutes at room temperature (77F or 25C) with full cure in 24 hours.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Tie Boss 1/4 In Tie Down 68 kg Max Load
Secure loads fast with the Tie Boss 1/4 In Tie Down, a compact and reusable tie down that grips cord, rope, and bungee with a simple wrap and lock action. Ideal for keeping items stable in the garage, workshop, trailer, or on the road.
Key features
Strong hold: up to 68 kg maximum load for light to medium securing tasks.
Quick to use: wrap, tension, and lock without knots.
Reusable and adjustable: easily retension or release when needed.
Works with common cord sizes: designed for 1/4 inch cord.
Compact and portable: keep one in the glovebox, tool bag, or camping kit.
Perfect for
Securing tarps, covers, and shade cloth
Bundling hoses, extension leads, and cables
Holding light loads in trailers, utes, and roof racks
Camping and caravanning setup and pack down
Specifications
Product: Tie down
Compatible cord size: 1/4 inch
Maximum load: 68 kg
Tip: Always check your cord condition and secure loads appropriately. Do not exceed the maximum load rating.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
3/8 Inch Tie Boss with 15 ft Rope
Make tie downs and light hoisting quick, clean, and repeatable with the 3/8 Inch Tie Boss. This clever rope tool combines a self-locking body with a strong solid braid rope, giving you fast tensioning without knots, ratchets, or tangled straps.
Why you will like it
Fast tie down and hoist: pull to tension, lock in place, then release when you are done.
Self-locking jam cleat: grips the rope under tension to help prevent slipping.
Extra anchor point: supports a 2:1 mechanical advantage for easier pulling when tying down, and can be used with a pulley setup for lifting.
Weather-ready rope: includes solid braid polypropylene rope for everyday outdoor use.
Versatile: ideal for trailers, ute trays, camping, garage storage, and securing bulky items.
In the box
(1) Tie Boss 3/8 inch body
(1) 15 ft solid braid polypropylene rope
(1) G hook
(1) S hook
Specifications
Rope size: 3/8 inch
Rope length: 15 ft
Working Load Limit (WLL): 300 lb (136 kg)
Common uses
Securing tarps, coolers, toolboxes, and camping gear
Tying down motorcycles, outdoor equipment, and timber
Hoisting bikes and gear for garage storage
Safety note: Always inspect rope and hardware before use, protect rope from sharp edges, and never exceed the working load limit. Use appropriate tie down points and follow safe lifting and load restraint practices.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Tie Boss Pulley (For 3/8 Inch Tie Boss)
Lift and store bulky gear with less effort using the Tie Boss Pulley. Add it to your 3/8 inch Tie Boss setup to create a mechanical advantage that makes lifting feel lighter, helping you hoist items like bikes, kayaks, ladders, roof boxes, and workshop gear with more control and less strain.
Key benefits
Mechanical advantage for easier lifting: use one pulley for a 2:1 setup or two pulleys for a 3:1 setup to reduce the effort required.
Ideal for overhead storage: great for garages, sheds, workshops, and caravanning setups.
Pairs with 3/8 inch Tie Boss: designed to work alongside the 3/8 inch Tie Boss rope tightening system.
Strong rating: 300 lb (136 kg) working load limit.
Common uses
Garage hoist for kayaks, bikes, and camping gear
Raising and lowering toolboxes and storage totes
General workshop lifting assistance and load positioning
Specifications
Product: Tie Boss Pulley
Compatibility: for use with 3/8 inch Tie Boss systems
Working Load Limit (WLL): 300 lb (136 kg)
Safety note: Always inspect rope, anchors, and hardware before use. Use appropriate mounting points and never exceed the working load limit. Not for climbing or supporting people.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Timbermate Wood filler is an Interior grade 4 in 1 Wood Putty, Grain Filler, Edge Filler and Crack Filler. When thinned slightly with water can also be used as a sanding sealer. Timbermate does not shrink, sink, crack or fall out and has an indefinite shelf life. It is non-flammable, non-toxic and can be used to the last gram.
The secret ingredient of Timbermate is tap water, therefore, containing no Acrylic, Latex or Solvents. Timbermate comes in 13 premixed colours plus Natural Tint Base. Timbermate takes all types of known stains, varnishes and coatings. The Timbermate formula is over 85 years old and is the only genuine water-based formula in the world proving that the formulation has stood the test of time.
Features & Benefits of Timbermate
No Waste, Usable to the last drop. If tub dries out just add water to soften.
Won't Shrink, Sink, Crack or Fall Out.
Suitable for use in all Timbers including Particle Board M.D.F. (Custom Wood) *Plaster Board, Flooring, Panelling etc.
Can be used as Wood Putty, Sanding Sealer, Prime Coat, Grainfiller, Crackfiller, Undercoat & Edge Filler all in one.
Available in 13 Timber Tones plus Natural. Use White for top coats only.
Can be tinted in wet state or overstained when dry. Use any type of Colorant i.e. Water Based Spirit based ochers etc.
Easy sanding, will not clog paper when DRY Sanded dust can be mixed with water for re-use.
Fast drying approx. 20-30 min, but can be heat dried with a heat gun or lamp for faster drying. Temperature can affect drying time.
Clean hands or tools with water.
Non-Flammable, Non-Toxic, Non-Yellowing.
Solvent, Latex and Acrylic Free.
Heat Proof and Freezeproof.
Provides a strong foundation for all top coats inc. Single & two pack products polyurethane's, oils, acrylics, french polish wax etc.
Takes nails, screws, planing, sawing, drilling and routing
Can be used on Metal, Plastic, Fibreglass and in Foundries.
100% Australian Made and Owned.
Available in pack sizes of 250g, 500g, 2Kg, 8Kg, 20Kg and 200Kg.
Interior Grade.
Edgefiller
Apply TIMBERMATE with a spatula or knife using hand pressure to force into the Edge or End of the grain. For spray gun use stir 10%-15% water into TIMBERMATE fit a 2mm mozzle and set pressure to 60psi. Boards can be stacked for easy spraying. Allow to dry and sand with a fine grit paper and apply topcoat.
Woodfiller/Wood Putty
Fills cracks, knots, pin and screw holes, splits, blemishes, etc. Fill deep holes in layers allowing time for each layer to dry. Will not blind natural wood grain. Drying time is about 30 minutes. TIMBERMATE dries hard and smooth without shrinking or sinking and can be belt or drum sanded as it is not affected by heat, the hotter it gets the harder and faster it sets and that means less "Down Time."
You can speed dry TIMBERMATE by adjusting the surrounding air temperature. This can be done by using either hot air, heat lamps, or kiln ovens.TIMBERMATE can be mixed with any stains before or after the filler is dry. To match medium and darker shades mix with Natural, Pine or other light shades. Use white TIMBERMATE only for white top coats.
Grainfiller
Mix 10% to 15% water into TIMBERMATE to make a perfect Grainfiller, Sanding Sealer and Prime Coat all in one application. First sand surface and with fine grit sandpaper, then apply Grainfiller to surface with a spray gun, paint roller, hessian or a cloth rolled into a ball, rub across the grain in a circular motion finishing with the grain. Sand, once filler is dry, to perfection with either sandpaper or power sander, using a fine grit paper. Grain filer can be used in a Roller or Curtain Coater or Spray Gun using a 2mm nozzle and 60psi pressure. Can be further thinned down with water if required.
MDF
Due to the finishing system used to manufacture MDF, it is essential to seal the job with a water-based non-acrylic product before applying top coats. Therefore TIMBERMATE meets your needs.
Flooring
Preparing old floors: Scrape all dust and waste between boards and surface as well as from knot holes and nail heads, vacuum well and carry out first sanding to prepare for filling and coating. Ensure that floor is stabilised, dry and free of movement.
Application new floors and prepared old floors: Fill cracks, knot and nail holes and all blemished with a putty knife. Fill deeper holes in layers of about 6mm allowing each fill to dry. Apply TIMBERMATE to the entire floor, as a sealant, using a squeegee, trowel or paint roller. Allow to dry and sand off with a fine paper - 120 to 150 grit is recommended for best results. The floor can now be stained or varnished.
Frequently Asked Questions
Question: Is TIMBERMATE toxic, flammable or harmful?
Answer: It is advisable to carry out safe work practices, as you would when working with dust. (Use an approved dust mask and safety goggles). TIMBERMATE contains no harmful ingredients and is non-flammable.
Question: Can TIMBERMATE be used externally?
Answer: No, as TIMBERMATE® is resoluble in water it is not advisable to use it outdoors. TIMBERMATE IS RECOMMENDED FOR INTERIOR USE. For external use, we recommend Earls MulTFill, Powder Putty or Porion Flexible Filler.
Question: Can TIMBERMATE be used with stains and other finishes?
Answer: Yes, TIMBERMATE® will take all types of known stains, coatings and colourants which can be Water based, Oil based, Solvent or Spirit based and even Acid Catalysed Lacquers.
Question: Can TIMBERMATE be grainfilled?
Answer: Yes, TIMBERMATE is a non-solvent based filler and is ideal for grainfilling. Mix 10-15% hot water to thin the Timbermate, then rub over the grain or spread thinly (see below for more detailed instructions). TIMBERMATE will: *Not raise the grain *Not damage the grain TIMBERMATE is: *Easy to sand when dry *Easy to stain when dry *Heat proof so you can speed the drying time by heating with a hair dryer, heat gun, lights etc.
Question: How is the grainfiller applied?
Answer: Take some TIMBERMATE out of the tub and place it in a separate container. Add approximately 10-15% water, (1gm=1ml) and mix into a slurry like paste (like toothpaste). Use a LINT FREE CLOTH AND RUB ACROSS THE GRAIN. When grainfiller goes "whitish" and sands off easily like talc powder, it is dry. TIMBERMATE will not blind the sandpaper (ie. clog up). If sandpaper gets clogged the grainfiller is not dry. Sand off in the same direction as the grain. Stain or coat when dry.
Question: When is the stain applied?
Answer: You can stain before or after applying TIMBERMATE (see "How do I match colours").
Question: How are the colours matched?
Answer: Colour matching is easy. You can do it either of the following ways: Add your colourant to the putty and match the exact colour whilst wet. TIMBERMATE will dry lighter, but coat back to its original wet colour once coated with clear finishes. The final result is what you see (wet) is what you get. You can stain TIMBERMATE once it is dry. To test if dry, just rub sandpaper over putty. If putty clogs the sandpaper the filler is still wet. Wait for TIMBERMATE to dry and then stain.
Question: How long does TIMBERMATE take to dry?
Answer: Depending on the weather and depth of fill, TIMBERMATE will dry as follows: In hot weather, TIMBERMATE dries quicker. In cold weather, the depth of fill will determine the drying time. You can speed up the drying time by using a heat gun, hair dryer or light.
Question: What depth or width can be filled?
Answer: Do not fill holes deeper than 6-8mm at a time. TIMBERMATE dries quicker when filled in layers. Allow TIMBERMATE to dry between layers.
Question: Why is the tub hard some days and feels dry and soft on other days?
Answer: TIMBERMATE is waterbased. It contains no harmful solvents or acrylics and is, therefore, temperature sensitive. The warmer the weather or environment the softer the putty. On hot days it will start to dry in the tub if not properly sealed. Add a few drops of water to re moisten.
Question: How is TIMBERMATE softened?
Answer: Add a few drops of warm water to the top of the tub. It will soften quite quickly. If tub is frozen, thaw out by standing tub in a tub of hot water or place in a microwave for 20 seconds. TIMBERMATE is freeze thaw stable.
Question: Can TIMBERMATE be used for any other purpose other than wood repair?
Answer: TIMBERMATE does not shrink, sink, crack or fallout and can, therefore, be used on Plasterboard, Masonry, Fibreglass, Plastic and any other surface. Bearing in mind that steel must be coated with a primer to avoid rusting.
Question: Can TIMBERMATE go off or does it have a shelf life?
Answer: TIMBERMATE has an unlimited shelf life and will last indefinitely. If contents become dry merely add a few drops of water to reconstitute. DO NOT add more water than is necessary or leave excess water in the tub for a long period of time. The trapped excess water in the tub will cause the putty to become contaminated and will start to degenerate.
Question: Why are so many colours available?
Answer: We manufacture 13 colours to match almost all shades and types of timber. If you are using a clear coat you must match your putty colour. If staining, use Natural (tinting base).
Question: What is Tint Base (Natural) putty and why?
Answer: Tint Base (Natural putty) is putty in its natural state uncoloured. You may add the lightest shade of tint to change its colour.
Question: Can TIMBERMATE be used on floors?
Answer: TIMBERMATE is ideal for filling cracks, gaps, and nail holes in floors. TIMBERMATE will enhance the grain on the floor. As it does not shrink, sink, crack or fall out it is highly recommended for all floors.
Question: Can TIMBERMATE be used with French Polish and Waxes?
Answer: You can use all types of Waxes, Shellac and Oils on TIMBERMATE.
Question: How is an incorrect match or badly filled hole fixed?
Answer: Errors can be fixed with ease. If TIMBERMATE is not coated then wash out. If already coated, then break the top coat and then wash out. Refill or rematch if necessary.
Question: Is TIMBERMATE Australian owned and manufactured?
Answer: Yes. TIMBERMATE is 100% Australian owned and manufactured. An all Australian dedicated workforce does all manufacturing in our Melbourne factory.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Tommy Tape® Self-Fusing Silicone Tape
The next generation of tape is here — premium, adhesive-free repair and sealing tape for fast fixes at home, on the job, and on the road.
Tommy Tape self-fusing silicone tape saves time and money across plumbing, electrical, automotive, marine, garden, and industrial jobs.
Unlike vinyl or cloth tapes, it uses no adhesive. Instead, it chemically bonds (self-fuses) to itself on contact to form a tough, flexible, and permanently water-tight wrap — even underwater.
Why you’ll love it
Extreme temperature range: operates from −65 °F to +500 °F (approx. −54 °C to +260 °C).
Electrical safety: insulates up to 8,000 V per layer (typical PVC electrical tape ≈ 600 V).
Leaves no residue: no adhesive means no sticky mess when removed.
Weather- & waterproof: seals within seconds; ideal for outdoor and marine use.
Flexible & form-fitting: stretches over 300% to wrap irregular shapes, fittings, and bends.
Built to last: resists UV, oil, salt, and common chemicals; helps combat corrosion.
Popular uses
Plumbing: emergency seals on copper, PVC, and garden hoses; patch vacuum and pool hoses.
Electrical: bundling and insulating leads, wire harnesses, extension-cord strain relief (power off first).
Automotive & 4×4: wrap frayed looms, protect hoses, create quick roadside fixes.
Marine: mast boot wraps, deck-side waterproofing, salt-spray protection.
Tools & grips: re-grip shovels, rakes, wheelbarrows, gym dumbbells, walking canes.
Sports & DIY: re-grip golf clubs, tennis/pickleball paddles; improve wheelchair and shower-chair grip.
Home & garden: weatherproof outdoor cables, protect back-yard gear and appliances.
Industrial: protective wraps on fittings, temporary containment where adhesives aren’t suitable.
How to apply (best results)
Prep: Turn power/water off where applicable. Clean and dry the area if possible.
Start & anchor: Peel off the liner, stretch the tape as you begin to wrap, and press the starting end onto itself to anchor.
Stretch & overlap: Stretch to at least 2× its length (more stretch = stronger fuse). Overlap each wrap by ½ width.
Build layers: Add additional layers for higher pressure, stronger seals, or increased dielectric protection.
Finish: End the wrap on itself and press firmly. Full fusion develops quickly; handle with care while it sets.
Remove: Cut off (do not unwind) when it’s time to replace — it leaves no residue.
Specifications
Material
Silicone rubber (self-fusing)
Adhesive
None (bonds to itself on contact)
Dielectric Strength
Up to 8,000 V per layer (build layers for higher insulation)
Temperature Range
−65 °F to +500 °F (approx. −54 °C to +260 °C)
Resistance
UV, oil, salt, weather, and common household/automotive chemicals
Water Performance
Weatherproof & waterproof; can be applied underwater in many scenarios
Elongation
Stretches over 300% for tight, conformal wraps
Removal
Cut off to remove; no sticky residue
Colours / Sizes
Varies by SKU (see options above)
Better than traditional tapes
Feature
Tommy Tape Self-Fusing Silicone
Vinyl / Cloth Electrical Tape
Adhesive
No adhesive (self-fuses)
Pressure-sensitive adhesive (leaves residue)
Waterproof Seal
Yes — seals in seconds; can be used underwater
Limited; adhesive can lift when wet
Dielectric Strength
Up to 8,000 V per layer
Typically ~600 V
Temperature Range
−54 °C to +260 °C
Narrower range; softens or becomes brittle
UV/Chemical Resistance
Excellent (UV, oil, salt, chemicals)
Moderate; can degrade outdoors
Residue on Removal
None — clean cut-off
Commonly leaves sticky residue
FAQs
Can I use it on live electrical circuits?
No. Always switch power off before wrapping. Build sufficient layers for the required insulation, and follow local electrical standards.
Will it stick to wet or oily surfaces?
Because it bonds to itself (not the substrate), it can often be applied in damp or even underwater situations. For best results, clean and dry the area first.
Is it reusable?
Once fused, it forms a single mass. Cut it off to remove; it won’t unwind. Apply a fresh wrap if needed.
What isn’t it for?
Not a substitute for permanent structural repairs. Avoid use on fuel lines or high-pressure systems without proper engineering sign-off.
Notes: Performance values are typical and depend on application method, substrate, and number of layers. Always test on a small area first. Follow safety guidelines for electrical and pressurised systems.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Tommy Tape® Self-Fusing Silicone Tape
The next generation of tape is here — premium, adhesive-free repair and sealing tape for fast fixes at home, on the job, and on the road.
Tommy Tape self-fusing silicone tape saves time and money across plumbing, electrical, automotive, marine, garden, and industrial jobs.
Unlike vinyl or cloth tapes, it uses no adhesive. Instead, it chemically bonds (self-fuses) to itself on contact to form a tough, flexible, and permanently water-tight wrap — even underwater.
Why you’ll love it
Extreme temperature range: operates from −65 °F to +500 °F (approx. −54 °C to +260 °C).
Electrical safety: insulates up to 8,000 V per layer (typical PVC electrical tape ≈ 600 V).
Leaves no residue: no adhesive means no sticky mess when removed.
Weather- & waterproof: seals within seconds; ideal for outdoor and marine use.
Flexible & form-fitting: stretches over 300% to wrap irregular shapes, fittings, and bends.
Built to last: resists UV, oil, salt, and common chemicals; helps combat corrosion.
Popular uses
Plumbing: emergency seals on copper, PVC, and garden hoses; patch vacuum and pool hoses.
Electrical: bundling and insulating leads, wire harnesses, extension-cord strain relief (power off first).
Automotive & 4×4: wrap frayed looms, protect hoses, create quick roadside fixes.
Marine: mast boot wraps, deck-side waterproofing, salt-spray protection.
Tools & grips: re-grip shovels, rakes, wheelbarrows, gym dumbbells, walking canes.
Sports & DIY: re-grip golf clubs, tennis/pickleball paddles; improve wheelchair and shower-chair grip.
Home & garden: weatherproof outdoor cables, protect back-yard gear and appliances.
Industrial: protective wraps on fittings, temporary containment where adhesives aren’t suitable.
How to apply (best results)
Prep: Turn power/water off where applicable. Clean and dry the area if possible.
Start & anchor: Peel off the liner, stretch the tape as you begin to wrap, and press the starting end onto itself to anchor.
Stretch & overlap: Stretch to at least 2× its length (more stretch = stronger fuse). Overlap each wrap by ½ width.
Build layers: Add additional layers for higher pressure, stronger seals, or increased dielectric protection.
Finish: End the wrap on itself and press firmly. Full fusion develops quickly; handle with care while it sets.
Remove: Cut off (do not unwind) when it’s time to replace — it leaves no residue.
Specifications
Material
Silicone rubber (self-fusing)
Adhesive
None (bonds to itself on contact)
Dielectric Strength
Up to 8,000 V per layer (build layers for higher insulation)
Temperature Range
−65 °F to +500 °F (approx. −54 °C to +260 °C)
Resistance
UV, oil, salt, weather, and common household/automotive chemicals
Water Performance
Weatherproof & waterproof; can be applied underwater in many scenarios
Elongation
Stretches over 300% for tight, conformal wraps
Removal
Cut off to remove; no sticky residue
Colours / Sizes
Varies by SKU (see options above)
Better than traditional tapes
Feature
Tommy Tape Self-Fusing Silicone
Vinyl / Cloth Electrical Tape
Adhesive
No adhesive (self-fuses)
Pressure-sensitive adhesive (leaves residue)
Waterproof Seal
Yes — seals in seconds; can be used underwater
Limited; adhesive can lift when wet
Dielectric Strength
Up to 8,000 V per layer
Typically ~600 V
Temperature Range
−54 °C to +260 °C
Narrower range; softens or becomes brittle
UV/Chemical Resistance
Excellent (UV, oil, salt, chemicals)
Moderate; can degrade outdoors
Residue on Removal
None — clean cut-off
Commonly leaves sticky residue
FAQs
Can I use it on live electrical circuits?
No. Always switch power off before wrapping. Build sufficient layers for the required insulation, and follow local electrical standards.
Will it stick to wet or oily surfaces?
Because it bonds to itself (not the substrate), it can often be applied in damp or even underwater situations. For best results, clean and dry the area first.
Is it reusable?
Once fused, it forms a single mass. Cut it off to remove; it won’t unwind. Apply a fresh wrap if needed.
What isn’t it for?
Not a substitute for permanent structural repairs. Avoid use on fuel lines or high-pressure systems without proper engineering sign-off.
Notes: Performance values are typical and depend on application method, substrate, and number of layers. Always test on a small area first. Follow safety guidelines for electrical and pressurised systems.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Tommy Tape® Self-Fusing Silicone Tape
The next generation of tape is here — premium, adhesive-free repair and sealing tape for fast fixes at home, on the job, and on the road.
Tommy Tape self-fusing silicone tape saves time and money across plumbing, electrical, automotive, marine, garden, and industrial jobs.
Unlike vinyl or cloth tapes, it uses no adhesive. Instead, it chemically bonds (self-fuses) to itself on contact to form a tough, flexible, and permanently water-tight wrap — even underwater.
Why you’ll love it
Extreme temperature range: operates from −65 °F to +500 °F (approx. −54 °C to +260 °C).
Electrical safety: insulates up to 8,000 V per layer (typical PVC electrical tape ≈ 600 V).
Leaves no residue: no adhesive means no sticky mess when removed.
Weather- & waterproof: seals within seconds; ideal for outdoor and marine use.
Flexible & form-fitting: stretches over 300% to wrap irregular shapes, fittings, and bends.
Built to last: resists UV, oil, salt, and common chemicals; helps combat corrosion.
Popular uses
Plumbing: emergency seals on copper, PVC, and garden hoses; patch vacuum and pool hoses.
Electrical: bundling and insulating leads, wire harnesses, extension-cord strain relief (power off first).
Automotive & 4×4: wrap frayed looms, protect hoses, create quick roadside fixes.
Marine: mast boot wraps, deck-side waterproofing, salt-spray protection.
Tools & grips: re-grip shovels, rakes, wheelbarrows, gym dumbbells, walking canes.
Sports & DIY: re-grip golf clubs, tennis/pickleball paddles; improve wheelchair and shower-chair grip.
Home & garden: weatherproof outdoor cables, protect back-yard gear and appliances.
Industrial: protective wraps on fittings, temporary containment where adhesives aren’t suitable.
How to apply (best results)
Prep: Turn power/water off where applicable. Clean and dry the area if possible.
Start & anchor: Peel off the liner, stretch the tape as you begin to wrap, and press the starting end onto itself to anchor.
Stretch & overlap: Stretch to at least 2× its length (more stretch = stronger fuse). Overlap each wrap by ½ width.
Build layers: Add additional layers for higher pressure, stronger seals, or increased dielectric protection.
Finish: End the wrap on itself and press firmly. Full fusion develops quickly; handle with care while it sets.
Remove: Cut off (do not unwind) when it’s time to replace — it leaves no residue.
Specifications
Material
Silicone rubber (self-fusing)
Adhesive
None (bonds to itself on contact)
Dielectric Strength
Up to 8,000 V per layer (build layers for higher insulation)
Temperature Range
−65 °F to +500 °F (approx. −54 °C to +260 °C)
Resistance
UV, oil, salt, weather, and common household/automotive chemicals
Water Performance
Weatherproof & waterproof; can be applied underwater in many scenarios
Elongation
Stretches over 300% for tight, conformal wraps
Removal
Cut off to remove; no sticky residue
Colours / Sizes
Varies by SKU (see options above)
Better than traditional tapes
Feature
Tommy Tape Self-Fusing Silicone
Vinyl / Cloth Electrical Tape
Adhesive
No adhesive (self-fuses)
Pressure-sensitive adhesive (leaves residue)
Waterproof Seal
Yes — seals in seconds; can be used underwater
Limited; adhesive can lift when wet
Dielectric Strength
Up to 8,000 V per layer
Typically ~600 V
Temperature Range
−54 °C to +260 °C
Narrower range; softens or becomes brittle
UV/Chemical Resistance
Excellent (UV, oil, salt, chemicals)
Moderate; can degrade outdoors
Residue on Removal
None — clean cut-off
Commonly leaves sticky residue
FAQs
Can I use it on live electrical circuits?
No. Always switch power off before wrapping. Build sufficient layers for the required insulation, and follow local electrical standards.
Will it stick to wet or oily surfaces?
Because it bonds to itself (not the substrate), it can often be applied in damp or even underwater situations. For best results, clean and dry the area first.
Is it reusable?
Once fused, it forms a single mass. Cut it off to remove; it won’t unwind. Apply a fresh wrap if needed.
What isn’t it for?
Not a substitute for permanent structural repairs. Avoid use on fuel lines or high-pressure systems without proper engineering sign-off.
Notes: Performance values are typical and depend on application method, substrate, and number of layers. Always test on a small area first. Follow safety guidelines for electrical and pressurised systems.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Tommy Tape® Self-Fusing Silicone Tape
The next generation of tape is here — premium, adhesive-free repair and sealing tape for fast fixes at home, on the job, and on the road.
Tommy Tape self-fusing silicone tape saves time and money across plumbing, electrical, automotive, marine, garden, and industrial jobs.
Unlike vinyl or cloth tapes, it uses no adhesive. Instead, it chemically bonds (self-fuses) to itself on contact to form a tough, flexible, and permanently water-tight wrap — even underwater.
Why you’ll love it
Extreme temperature range: operates from −65 °F to +500 °F (approx. −54 °C to +260 °C).
Electrical safety: insulates up to 8,000 V per layer (typical PVC electrical tape ≈ 600 V).
Leaves no residue: no adhesive means no sticky mess when removed.
Weather- & waterproof: seals within seconds; ideal for outdoor and marine use.
Flexible & form-fitting: stretches over 300% to wrap irregular shapes, fittings, and bends.
Built to last: resists UV, oil, salt, and common chemicals; helps combat corrosion.
Popular uses
Plumbing: emergency seals on copper, PVC, and garden hoses; patch vacuum and pool hoses.
Electrical: bundling and insulating leads, wire harnesses, extension-cord strain relief (power off first).
Automotive & 4×4: wrap frayed looms, protect hoses, create quick roadside fixes.
Marine: mast boot wraps, deck-side waterproofing, salt-spray protection.
Tools & grips: re-grip shovels, rakes, wheelbarrows, gym dumbbells, walking canes.
Sports & DIY: re-grip golf clubs, tennis/pickleball paddles; improve wheelchair and shower-chair grip.
Home & garden: weatherproof outdoor cables, protect back-yard gear and appliances.
Industrial: protective wraps on fittings, temporary containment where adhesives aren’t suitable.
How to apply (best results)
Prep: Turn power/water off where applicable. Clean and dry the area if possible.
Start & anchor: Peel off the liner, stretch the tape as you begin to wrap, and press the starting end onto itself to anchor.
Stretch & overlap: Stretch to at least 2× its length (more stretch = stronger fuse). Overlap each wrap by ½ width.
Build layers: Add additional layers for higher pressure, stronger seals, or increased dielectric protection.
Finish: End the wrap on itself and press firmly. Full fusion develops quickly; handle with care while it sets.
Remove: Cut off (do not unwind) when it’s time to replace — it leaves no residue.
Specifications
Material
Silicone rubber (self-fusing)
Adhesive
None (bonds to itself on contact)
Dielectric Strength
Up to 8,000 V per layer (build layers for higher insulation)
Temperature Range
−65 °F to +500 °F (approx. −54 °C to +260 °C)
Resistance
UV, oil, salt, weather, and common household/automotive chemicals
Water Performance
Weatherproof & waterproof; can be applied underwater in many scenarios
Elongation
Stretches over 300% for tight, conformal wraps
Removal
Cut off to remove; no sticky residue
Colours / Sizes
Varies by SKU (see options above)
Better than traditional tapes
Feature
Tommy Tape Self-Fusing Silicone
Vinyl / Cloth Electrical Tape
Adhesive
No adhesive (self-fuses)
Pressure-sensitive adhesive (leaves residue)
Waterproof Seal
Yes — seals in seconds; can be used underwater
Limited; adhesive can lift when wet
Dielectric Strength
Up to 8,000 V per layer
Typically ~600 V
Temperature Range
−54 °C to +260 °C
Narrower range; softens or becomes brittle
UV/Chemical Resistance
Excellent (UV, oil, salt, chemicals)
Moderate; can degrade outdoors
Residue on Removal
None — clean cut-off
Commonly leaves sticky residue
FAQs
Can I use it on live electrical circuits?
No. Always switch power off before wrapping. Build sufficient layers for the required insulation, and follow local electrical standards.
Will it stick to wet or oily surfaces?
Because it bonds to itself (not the substrate), it can often be applied in damp or even underwater situations. For best results, clean and dry the area first.
Is it reusable?
Once fused, it forms a single mass. Cut it off to remove; it won’t unwind. Apply a fresh wrap if needed.
What isn’t it for?
Not a substitute for permanent structural repairs. Avoid use on fuel lines or high-pressure systems without proper engineering sign-off.
Notes: Performance values are typical and depend on application method, substrate, and number of layers. Always test on a small area first. Follow safety guidelines for electrical and pressurised systems.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Tommy Tape® Self-Fusing Silicone Tape
The next generation of tape is here — premium, adhesive-free repair and sealing tape for fast fixes at home, on the job, and on the road.
Tommy Tape self-fusing silicone tape saves time and money across plumbing, electrical, automotive, marine, garden, and industrial jobs.
Unlike vinyl or cloth tapes, it uses no adhesive. Instead, it chemically bonds (self-fuses) to itself on contact to form a tough, flexible, and permanently water-tight wrap — even underwater.
Why you’ll love it
Extreme temperature range: operates from −65 °F to +500 °F (approx. −54 °C to +260 °C).
Electrical safety: insulates up to 8,000 V per layer (typical PVC electrical tape ≈ 600 V).
Leaves no residue: no adhesive means no sticky mess when removed.
Weather- & waterproof: seals within seconds; ideal for outdoor and marine use.
Flexible & form-fitting: stretches over 300% to wrap irregular shapes, fittings, and bends.
Built to last: resists UV, oil, salt, and common chemicals; helps combat corrosion.
Popular uses
Plumbing: emergency seals on copper, PVC, and garden hoses; patch vacuum and pool hoses.
Electrical: bundling and insulating leads, wire harnesses, extension-cord strain relief (power off first).
Automotive & 4×4: wrap frayed looms, protect hoses, create quick roadside fixes.
Marine: mast boot wraps, deck-side waterproofing, salt-spray protection.
Tools & grips: re-grip shovels, rakes, wheelbarrows, gym dumbbells, walking canes.
Sports & DIY: re-grip golf clubs, tennis/pickleball paddles; improve wheelchair and shower-chair grip.
Home & garden: weatherproof outdoor cables, protect back-yard gear and appliances.
Industrial: protective wraps on fittings, temporary containment where adhesives aren’t suitable.
How to apply (best results)
Prep: Turn power/water off where applicable. Clean and dry the area if possible.
Start & anchor: Peel off the liner, stretch the tape as you begin to wrap, and press the starting end onto itself to anchor.
Stretch & overlap: Stretch to at least 2× its length (more stretch = stronger fuse). Overlap each wrap by ½ width.
Build layers: Add additional layers for higher pressure, stronger seals, or increased dielectric protection.
Finish: End the wrap on itself and press firmly. Full fusion develops quickly; handle with care while it sets.
Remove: Cut off (do not unwind) when it’s time to replace — it leaves no residue.
Specifications
Material
Silicone rubber (self-fusing)
Adhesive
None (bonds to itself on contact)
Dielectric Strength
Up to 8,000 V per layer (build layers for higher insulation)
Temperature Range
−65 °F to +500 °F (approx. −54 °C to +260 °C)
Resistance
UV, oil, salt, weather, and common household/automotive chemicals
Water Performance
Weatherproof & waterproof; can be applied underwater in many scenarios
Elongation
Stretches over 300% for tight, conformal wraps
Removal
Cut off to remove; no sticky residue
Colours / Sizes
Varies by SKU (see options above)
Better than traditional tapes
Feature
Tommy Tape Self-Fusing Silicone
Vinyl / Cloth Electrical Tape
Adhesive
No adhesive (self-fuses)
Pressure-sensitive adhesive (leaves residue)
Waterproof Seal
Yes — seals in seconds; can be used underwater
Limited; adhesive can lift when wet
Dielectric Strength
Up to 8,000 V per layer
Typically ~600 V
Temperature Range
−54 °C to +260 °C
Narrower range; softens or becomes brittle
UV/Chemical Resistance
Excellent (UV, oil, salt, chemicals)
Moderate; can degrade outdoors
Residue on Removal
None — clean cut-off
Commonly leaves sticky residue
FAQs
Can I use it on live electrical circuits?
No. Always switch power off before wrapping. Build sufficient layers for the required insulation, and follow local electrical standards.
Will it stick to wet or oily surfaces?
Because it bonds to itself (not the substrate), it can often be applied in damp or even underwater situations. For best results, clean and dry the area first.
Is it reusable?
Once fused, it forms a single mass. Cut it off to remove; it won’t unwind. Apply a fresh wrap if needed.
What isn’t it for?
Not a substitute for permanent structural repairs. Avoid use on fuel lines or high-pressure systems without proper engineering sign-off.
Notes: Performance values are typical and depend on application method, substrate, and number of layers. Always test on a small area first. Follow safety guidelines for electrical and pressurised systems.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Tommy Tape® Self-Fusing Silicone Tape
The next generation of tape is here — premium, adhesive-free repair and sealing tape for fast fixes at home, on the job, and on the road.
Tommy Tape self-fusing silicone tape saves time and money across plumbing, electrical, automotive, marine, garden, and industrial jobs. Unlike vinyl or cloth tapes, it uses no adhesive. Instead, it chemically bonds (self-fuses) to itself on contact to form a tough, flexible, and permanently water-tight wrap — even underwater.
Why you’ll love it
Extreme temperature range: operates from −65 °F to +500 °F (approx. −54 °C to +260 °C).
Electrical safety: insulates up to 8,000 V per layer (typical PVC electrical tape ≈ 600 V).
Leaves no residue: no adhesive means no sticky mess when removed.
Weather- & waterproof: seals within seconds; ideal for outdoor and marine use.
Flexible & form-fitting: stretches over 300% to wrap irregular shapes, fittings, and bends.
Built to last: resists UV, oil, salt, and common chemicals; helps combat corrosion.
Popular uses
Plumbing: emergency seals on copper, PVC, and garden hoses; patch vacuum and pool hoses.
Electrical: bundling and insulating leads, wire harnesses, extension-cord strain relief (power off first).
Automotive & 4×4: wrap frayed looms, protect hoses, create quick roadside fixes.
Marine: mast boot wraps, deck-side waterproofing, salt-spray protection.
Tools & grips: re-grip shovels, rakes, wheelbarrows, gym dumbbells, walking canes.
Sports & DIY: re-grip golf clubs, tennis/pickleball paddles; improve wheelchair and shower-chair grip.
Home & garden: weatherproof outdoor cables, protect back-yard gear and appliances.
Industrial: protective wraps on fittings, temporary containment where adhesives aren’t suitable.
How to apply (best results)
Prep: Turn power/water off where applicable. Clean and dry the area if possible.
Start & anchor: Peel off the liner, stretch the tape as you begin to wrap, and press the starting end onto itself to anchor.
Stretch & overlap: Stretch to at least 2× its length (more stretch = stronger fuse). Overlap each wrap by ½ width.
Build layers: Add additional layers for higher pressure, stronger seals, or increased dielectric protection.
Finish: End the wrap on itself and press firmly. Full fusion develops quickly; handle with care while it sets.
Remove: Cut off (do not unwind) when it’s time to replace — it leaves no residue.
Specifications
Material
Silicone rubber (self-fusing)
Adhesive
None (bonds to itself on contact)
Dielectric Strength
Up to 8,000 V per layer (build layers for higher insulation)
Temperature Range
−65 °F to +500 °F (approx. −54 °C to +260 °C)
Resistance
UV, oil, salt, weather, and common household/automotive chemicals
Water Performance
Weatherproof & waterproof; can be applied underwater in many scenarios
Elongation
Stretches over 300% for tight, conformal wraps
Removal
Cut off to remove; no sticky residue
Colours / Sizes
Varies by SKU (see options above)
Better than traditional tapes
Feature
Tommy Tape Self-Fusing Silicone
Vinyl / Cloth Electrical Tape
Adhesive
No adhesive (self-fuses)
Pressure-sensitive adhesive (leaves residue)
Waterproof Seal
Yes — seals in seconds; can be used underwater
Limited; adhesive can lift when wet
Dielectric Strength
Up to 8,000 V per layer
Typically ~600 V
Temperature Range
−54 °C to +260 °C
Narrower range; softens or becomes brittle
UV/Chemical Resistance
Excellent (UV, oil, salt, chemicals)
Moderate; can degrade outdoors
Residue on Removal
None — clean cut-off
Commonly leaves sticky residue
FAQs
Can I use it on live electrical circuits?
No. Always switch power off before wrapping. Build sufficient layers for the required insulation, and follow local electrical standards.
Will it stick to wet or oily surfaces?
Because it bonds to itself (not the substrate), it can often be applied in damp or even underwater situations. For best results, clean and dry the area first.
Is it reusable?
Once fused, it forms a single mass. Cut it off to remove; it won’t unwind. Apply a fresh wrap if needed.
What isn’t it for?
Not a substitute for permanent structural repairs. Avoid use on fuel lines or high-pressure systems without proper engineering sign-off.
Notes: Performance values are typical and depend on application method, substrate, and number of layers. Always test on a small area first. Follow safety guidelines for electrical and pressurised systems.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Tricleanium All Purpose Cleaner RTU is the ready-to-use, trigger-spray version of the cult Australian cleaner that tradespeople and professional cleaners have relied on for generations. It works straight from the 750 mL bottle with no mixing or dilution, making it ideal for fast spot cleaning and surface preparation around the home, workshop and job site.Built on a formula of 100% alkaline salts, it is non-caustic, non-corrosive and anti-bacterial, yet powerful enough to cut through grease, baked-on grime, mould, smoke stains, finger marks and general dirt on most washable surfaces, including painted walls, concrete, tiles, laminate, plastics, stainless steel and glass.Where to use itIndoors: walls and ceilings, benchtops, tiles and slate, stovetops, ovens and oven trays, frypans, rangehoods and exhaust fan covers, splashbacks, sinks, baths and showers, glass and windows, fridges, cupboards and shelves, washing machines and home-brewing equipment. It is also excellent for preparing walls before painting or wallpapering, and for softening old wallpaper glue.Outdoors: weatherboards, external timber and brickwork, BBQs and hotplates, awnings and external blinds, tarpaulins and tonneau covers, greasy engine parts, and grease or oil stains on driveways and concrete.How to useSpray directly onto the surface and allow a few moments to penetrate, without letting it dry. Wipe with a soft cloth, then rinse with fresh water so no residue is left behind. When cleaning glass or windows, rinse immediately with fresh water to prevent clouding. Rinse all cleaned surfaces with fresh water afterwards.Important notes
Not recommended for brass or aluminium-plated surfaces.
Keep away from carpet and any surface that is not colourfast.
Always test an inconspicuous area first if you are unsure how a surface will react.
Specifications
Brand
Tricleanium
Product type
All-purpose cleaner (ready to use)
Volume
750 mL
Format
Trigger spray bottle
Composition
100% alkaline salts; contains trisodium phosphate (1 to 3%)
Properties
Non-caustic, non-corrosive, anti-bacterial, strongly alkaline (high pH)
Dilution
Not required (ready to use)
Suitable surfaces
Painted surfaces, concrete, tile, laminate, plastic, stainless steel, glass and most washable surfaces
Not suitable for
Brass, aluminium-plated surfaces, carpet, non-colourfast surfaces
Country of origin
Australia
SafetyCauses skin irritation and serious eye irritation, and may cause respiratory irritation. Wear protective gloves and eye protection, use in a well-ventilated area, and keep out of reach of children. Harmful to aquatic life due to its high pH, so avoid release to the environment. Read the manufacturer's Safety Data Sheet before use.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
USE TRICLEANIUM:
•Before painting or wallpapering
•On internal or external walls, floors, bench tops, tiles, slate, stainless steel, baths, glass, stove tops, range hoods, fridges, cupboards, shelves, greasy oven trays, home brewing equipment.
•To clean musty washing machines
•Outside on greasy driveways or garage floors, boats or BBQ's.
•In the factory, commercial kitchen, where concentrated cleaning power or degreasing is needed.
TRICLEANIUM is a wholly Australian owned family business and has been in the market place for more than 50 years.
TRICLEANIUM is a concentrated cleaning product in crystal form (100% alkaline salts). It is not diluted by fillers or water.
TRICLEANIUM’s ultra concentrated power means it can tackle the toughest jobs that other products won’t touch including BBQs, range hoods, greasy driveways, cleaning in engineering works and the like.
TRICLEANIUM can be used on almost any washable surface (floors, walls, concrete, kitchen appliances, fibreglass, tiles etc) but prolonged contact with exposed aluminium and brass should be avoided.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
USE TRICLEANIUM:
•Before painting or wallpapering
•On internal or external walls, floors, bench tops, tiles, slate, stainless steel, baths, glass, stove tops, range hoods, fridges, cupboards, shelves, greasy oven trays, home brewing equipment.
•To clean musty washing machines
•Outside on greasy driveways or garage floors, boats or BBQ's.
•In the factory, commercial kitchen, where concentrated cleaning power or degreasing is needed.
TRICLEANIUM is a wholly Australian owned family business and has been in the market place for more than 50 years.
TRICLEANIUM is a concentrated cleaning product in crystal form (100% alkaline salts). It is not diluted by fillers or water.
TRICLEANIUM’s ultra concentrated power means it can tackle the toughest jobs that other products won’t touch including BBQs, range hoods, greasy driveways, cleaning in engineering works and the like.
TRICLEANIUM can be used on almost any washable surface (floors, walls, concrete, kitchen appliances, fibreglass, tiles etc) but prolonged contact with exposed aluminium and brass should be avoided.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
USE TRICLEANIUM:
•Before painting or wallpapering
•On internal or external walls, floors, bench tops, tiles, slate, stainless steel, baths, glass, stove tops, range hoods, fridges, cupboards, shelves, greasy oven trays, home brewing equipment.
•To clean musty washing machines
•Outside on greasy driveways or garage floors, boats or BBQ's.
•In the factory, commercial kitchen, where concentrated cleaning power or degreasing is needed.
TRICLEANIUM is a wholly Australian owned family business and has been in the market place for more than 50 years.
TRICLEANIUM is a concentrated cleaning product in crystal form (100% alkaline salts). It is not diluted by fillers or water.
TRICLEANIUM’s ultra concentrated power means it can tackle the toughest jobs that other products won’t touch including BBQs, range hoods, greasy driveways, cleaning in engineering works and the like.
TRICLEANIUM can be used on almost any washable surface (floors, walls, concrete, kitchen appliances, fibreglass, tiles etc) but prolonged contact with exposed aluminium and brass should be avoided.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Tuff Turf Synthetic Grass Adhesive 320 g
Overview
Tuff Turf Synthetic Grass Adhesive 320 g is a high quality synthetic grass adhesive designed to deliver consistent, reliable bonding performance for trade professionals and serious DIYers. It is formulated for dependable adhesion, easy application, and clean finishing so you can complete jobs with confidence and minimal rework.
Why choose this product
Reliable bond performance supported by proven chemistry and rigorous quality control.
Smooth, predictable application that helps reduce mess and cleanup time.
Versatile adhesion profile suited to a wide range of substrates and project types.
Clear guidance on surface preparation, application method, and curing to help achieve the best possible result.
Suitable for residential fit-outs, maintenance, repairs, and light commercial projects.
Suitable materials
synthetic turf backing
seaming tape
concrete
compacted base
plywood
Typical applications
General installation, repair, and maintenance where a durable bond is required.
Interior work that benefits from a neat finish and tidy joints.
Projects where dependable initial grab and high final strength are important.
Surface preparation
Ensure all surfaces are clean, sound, and dry. Remove dust, oil, release agents, laitance, and any loose or flaky material. For dense or non-porous surfaces, light abrasion improves key. Test adhesion on a small area if you are unsure about compatibility. Observe local safety requirements when sanding or cutting.
Application
Check ambient and substrate temperature. Install in dry conditions between 10°C and 30°C, avoiding heavy dew or rain.
Cut the nozzle to the required bead size or prepare the container according to the product type.
Apply an even bead or spread with a suitable trowel where required. Avoid trapping air.
Press the materials together, ensuring full contact. For sheet goods, roll firmly to promote transfer and wetting.
Support, clamp, or brace as needed until the adhesive develops sufficient handling strength.
Cure and working time
Working time varies with conditions. Allow sufficient cure before foot traffic. Full strength typically within 24 to 48 hours. Cooler temperatures and high humidity will slow curing, while warmer, drier conditions accelerate it. Do not load or finish until the bond has developed adequate strength. Always follow best practice for ventilation and safe handling during cure.
Coverage
Coverage varies based on substrate profile, bead size, and installation method. As a guide, a 300 ml cartridge with a 6 mm round bead can lay several linear meters. For trowel applied adhesives, a notched trowel pattern will influence yield. Plan to have extra on hand for porous or uneven surfaces.
Limitations
Do not apply to surfaces that are visibly wet unless the product specifically allows damp application.
Avoid continuous water immersion unless the product is rated for that exposure.
Not all plastics are compatible; test on polypropylene, polyethylene, and PTFE if required.
Observe maximum service temperature and any movement or vibration limits appropriate to the application.
Clean up
Clean tools while wet with a suitable solvent or soapy water depending on formulation. Always read the product label and follow local regulations for disposal of leftover material and containers.
Safety
Read the label before use and keep out of reach of children. Use in a well ventilated area. Wear protective gloves and eye protection. If on skin, wash with soap and water. If in eyes, rinse cautiously and seek medical advice if irritation persists. Do not ingest. Refer to the product Safety Data Sheet for detailed information.
Storage
Store upright in a cool, dry place away from direct sunlight and heat sources. Keep the cap or nozzle tightly closed when not in use. Do not allow to freeze unless the product literature states it is freeze-thaw stable. Rotate stock to use older product first.
Troubleshooting
Poor adhesion: Check surface prep, remove contaminants, and reapply with firm pressure.
Slow cure: Verify temperature and humidity. Increase airflow or allow more time.
Excess squeeze-out: Reduce bead size or spread more evenly. Clean residue before it skins.
Frequently asked questions
Can I paint over it? Many adhesives can be overcoated once cured. Test a small area with your paint system first.
Is it suitable outdoors? Check the product label for outdoor rating. Protect fresh adhesive from rain until cured.
What is the service temperature range? Typical service ranges suit most building environments. Avoid direct flame or extreme heat.
How do I remove cured material? Mechanical methods are usually required. Work carefully to avoid damaging surrounding finishes.
Why buy from Glues Australia
We curate a focused range so you can choose faster and build better. Every product listing includes practical how to detail, compatibility guidance, and straightforward support from a team that understands trade requirements. Order with confidence and get your project moving.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
3 x 1g originally sealed tubes
ideal portion for one application.
in a handy storage box
reaches the smallest corners and joints
Extra strong super glue in 3 x 1g tubes, packaged in a small storage box, ensuring optimal quality for every new application. The liquid adhesive reaches the smallest corners and joints.
Materials
Glues many plastics, porcelain, ceramic, metal, wood and rubber. Not suitable for leather clothing, PE, PP nor styrofoam.
Use and Handling Instructions
Surfaces to be stuck together must fit exactly and must be dry and free of dust and grease. Apply a thin layer of adhesive to one side. The thinner the film of adhesive, the stronger the bond. Press the parts together immediately and hold in place for a short time. Breathing upon the surfaces to be stuck will speed up bonding. After use, wipe the applicator tip dry and close firmly. Will last longer if stored in a cool place.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
UHU All Purpose Adhesives Super Strong & Safe, the super strong and super fast adhesive, which is adjustable - no instant finger bonding. Suitable for virtually all flexible, solid, porous and non-porous materials. Formula patented. Withstands vibrations and tremors. Moisture and heat resistant from -50°C to +100°C.
Materials
Universal - glues porcelain, ceramic, many plastic materials, metal, wood, glass, leather, rubber, Styrofoam®, paper, cardboard.
Not suitable for leather clothing, textiles, PE and PP.
Use and Handling Instructions
Surfaces to be stuck together must be dry and free of dust and grease. Apply a thin layer of adhesive to one side. Press parts together. Glue joint remains correctable for approx. 20 seconds. The thinner the film of adhesive, the stronger the bond.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Say Goodbye to Stubborn, Sticky Messes!
Tired of wrestling with stubborn price tags that tear and leave a papery, sticky mess? Frustrated by gummy residue left behind by tape on new appliances or furniture? We've all been there, risking our fingernails and damaging surfaces trying to scrape and scrub away unwanted adhesives. It’s time to stop the struggle. Introducing Un-Du® Adhesive Remover, the ultimate solution from Glues Australia that works like magic.
This isn't just another solvent; it's a revolutionary removal system. Unlike harsh chemicals that dissolve glue and ruin your items, the Un-Du® formula cleverly works by temporarily neutralizing the adhesive. A few drops are all it takes to seep under the label or sticker, breaking the bond with the surface. Simply lift it off cleanly and effortlessly with the handy included scraper tool. The best part? Once the fast-evaporating Un-Du® formula disappears, the stickiness on the sticker returns, allowing you to reuse it somewhere else! It’s the perfect tool for repositioning labels, photos, and more.
An Essential Tool for Every Australian Home
From the kitchen to the garage, you'll find hundreds of uses for Un-Du®. It’s the one tool that’s more versatile than duct tape, designed to solve all those sticky problems that pop up in daily life. Keep a bottle handy and you'll always be prepared.
Gift Giving Made Easy: Effortlessly removes price stickers from delicate gifts like crystal vases, books, and photo frames without leaving a trace.
Clean Up Your Car: Finally get rid of that old bumper sticker from your ute or the remnants of a parking permit on your windscreen without damaging the paint or glass.
Appliance & Furniture Rescue: Safely removes warranty stickers, energy rating labels, and masking tape from new fridges, TVs, and fine wood furniture.
Household Accidents: Lifts chewing gum from carpet, tar from floors, and crayon marks from walls with remarkable ease.
The Ultimate Office & Warehouse Productivity Hack
Streamline your workflow and maintain a clean, professional workspace. Un-Du® is an indispensable asset for any office, mailroom, or warehouse environment, saving you time, money, and frustration.
Package & Mail Management: Open self-sealing envelopes and padded mailers without tearing them, perfect for retrieving contents or reusing packaging.
File & Asset Organisation: Easily remove and replace labels on files, shelves, computer disks, and office equipment without leaving a sticky, dirt-collecting residue.
Mistake Correction: Quickly lifts correction fluid (White Out) from documents without smudging or tearing the paper.
Workspace Maintenance: Removes old tape marks from desks, partitions, and windows, keeping your office looking pristine.
A Must-Have for Crafters and Memory Keepers
Your precious memories and delicate projects deserve the best care. The Un-Du® formula is completely acid-free and photo-safe, making it the trusted choice for hobbyists, scrapbookers, and archivists who demand perfection and preservation.
Scrapbooking Perfection: Safely lift and reposition photos in albums and scrapbooks without causing fading, yellowing, or damage.
Model Making: Remove masking tape from delicate models without lifting paint or leaving residue.
Paper Crafts: Adjust stickers and embellishments on acid-free and lignin-free papers with total confidence.
Stop struggling and start un-sticking the clean, simple, and safe way. Add Un-Du® Adhesive & Sticker Remover to your cart today and discover a world free from sticky situations!
Product Specifications
Brand: Un-Du®
Product Name: Adhesive & Sticker Remover
Formula: Acid-Free, Photo-Safe, Quick-Evaporating Solvent
Key Feature: Temporarily neutralizes adhesives, allowing for the reuse of most stickers and labels after evaporation.
Residue: Leaves no oily, greasy, or sticky residue behind.
Tool: Comes with an attached, non-scratching, integrated scraper tool for easy lifting.
Common Applications:
Sticker & Label Removal
Tape & Decal Removal
Price Tag Removal
Gum & Tar Cleaning
Correction Fluid (White Out) Lifting
Opening Sealed Envelopes
Safe For Use On Surfaces Including:
Glass & Plastics
Fine Wood Furniture
Metals
Carpets & Upholstery
Delicate Fabrics
Photos
Acid & Lignin-Free Papers
Painted Surfaces & Wallpaper
And much more!
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
The UNi-PRO Real Good Scrapers are a comprehensive range of scrapers, perfect for DIY jobs such as removing flaky paint or silicone. The blades have been extremely durable and reliable in various weather conditions and over time. With the scraper being made from high quality German steel that has resistant to corrosion, your professional tool will last just as long as you do!
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
The UNi-PRO Real Good Scrapers are a comprehensive range of scrapers, perfect for DIY jobs such as removing flaky paint or silicone. The blades have been extremely durable and reliable in various weather conditions and over time. With the scraper being made from high quality German steel that has resistant to corrosion, your professional tool will last just as long as you do!
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
The UNi-PRO Real Good Scrapers are a comprehensive range of scrapers, perfect for DIY jobs such as removing flaky paint or silicone. The blades have been extremely durable and reliable in various weather conditions and over time. With the scraper being made from high quality German steel that has resistant to corrosion, your professional tool will last just as long as you do!
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
The UNi-PRO Real Good Scrapers are a comprehensive range of scrapers, perfect for DIY jobs such as removing flaky paint or silicone. The blades have been extremely durable and reliable in various weather conditions and over time. With the scraper being made from high quality German steel that has resistant to corrosion, your professional tool will last just as long as you do!
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
UNi-PRO Cornice Adhesive 2.5 kg
Overview
UNi-PRO Cornice Adhesive 2.5 kg is a high quality cornice adhesive designed to deliver consistent, reliable bonding performance for trade professionals and serious DIYers. It is formulated for dependable adhesion, easy application, and clean finishing so you can complete jobs with confidence and minimal rework.
Why choose this product
Reliable bond performance supported by proven chemistry and rigorous quality control.
Smooth, predictable application that helps reduce mess and cleanup time.
Versatile adhesion profile suited to a wide range of substrates and project types.
Clear guidance on surface preparation, application method, and curing to help achieve the best possible result.
Suitable for residential fit-outs, maintenance, repairs, and light commercial projects.
Suitable materials
plaster cornice
plasterboard
masonry
Typical applications
General installation, repair, and maintenance where a durable bond is required.
Interior work that benefits from a neat finish and tidy joints.
Projects where dependable initial grab and high final strength are important.
Surface preparation
Ensure all surfaces are clean, sound, and dry. Remove dust, oil, release agents, laitance, and any loose or flaky material. For dense or non-porous surfaces, light abrasion improves key. Test adhesion on a small area if you are unsure about compatibility. Observe local safety requirements when sanding or cutting.
Application
Check ambient and substrate temperature. Apply between 10°C and 30°C in dry, draft free conditions.
Cut the nozzle to the required bead size or prepare the container according to the product type.
Apply an even bead or spread with a suitable trowel where required. Avoid trapping air.
Press the materials together, ensuring full contact. For sheet goods, roll firmly to promote transfer and wetting.
Support, clamp, or brace as needed until the adhesive develops sufficient handling strength.
Cure and working time
Sets firm to hold cornice in place, full cure over 24 hours or as directed. Cooler temperatures and high humidity will slow curing, while warmer, drier conditions accelerate it. Do not load or finish until the bond has developed adequate strength. Always follow best practice for ventilation and safe handling during cure.
Coverage
Coverage varies based on substrate profile, bead size, and installation method. As a guide, a 300 ml cartridge with a 6 mm round bead can lay several linear meters. For trowel applied adhesives, a notched trowel pattern will influence yield. Plan to have extra on hand for porous or uneven surfaces.
Limitations
Do not apply to surfaces that are visibly wet unless the product specifically allows damp application.
Avoid continuous water immersion unless the product is rated for that exposure.
Not all plastics are compatible; test on polypropylene, polyethylene, and PTFE if required.
Observe maximum service temperature and any movement or vibration limits appropriate to the application.
Clean up
Wipe away fresh adhesive with a damp cloth. Scrape away set material carefully. Always read the product label and follow local regulations for disposal of leftover material and containers.
Safety
Read the label before use and keep out of reach of children. Use in a well ventilated area. Wear protective gloves and eye protection. If on skin, wash with soap and water. If in eyes, rinse cautiously and seek medical advice if irritation persists. Do not ingest. Refer to the product Safety Data Sheet for detailed information.
Storage
Store upright in a cool, dry place away from direct sunlight and heat sources. Keep the cap or nozzle tightly closed when not in use. Do not allow to freeze unless the product literature states it is freeze-thaw stable. Rotate stock to use older product first.
Troubleshooting
Poor adhesion: Check surface prep, remove contaminants, and reapply with firm pressure.
Slow cure: Verify temperature and humidity. Increase airflow or allow more time.
Excess squeeze-out: Reduce bead size or spread more evenly. Clean residue before it skins.
Frequently asked questions
Can I paint over it? Many adhesives can be overcoated once cured. Test a small area with your paint system first.
Is it suitable outdoors? Check the product label for outdoor rating. Protect fresh adhesive from rain until cured.
What is the service temperature range? Typical service ranges suit most building environments. Avoid direct flame or extreme heat.
How do I remove cured material? Mechanical methods are usually required. Work carefully to avoid damaging surrounding finishes.
Why buy from Glues Australia
We curate a focused range so you can choose faster and build better. Every product listing includes practical how to detail, compatibility guidance, and straightforward support from a team that understands trade requirements. Order with confidence and get your project moving.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
The UNi-PRO snap blade knife is the perfect tool for all your tasks. From opening packages to cutting string, this durable and convenient multi-purpose knife will make life easier!
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Ready to use, hard drying acrylic putty filler
Ideal for repairing cracked, broken or uneven surfaces
30 minute fast drying time
Includes bonus applicator
Suitable for fibrous cement, brick, plaster and wood surface repairs
available in 500gm/1.5kg
Not suitable for wet areas or where structural movement occurs
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Ready to use, hard drying acrylic putty filler
Ideal for repairing cracked, broken or uneven surfaces
30 minute fast drying time
Includes bonus applicator
Suitable for fibrous cement, brick, plaster and wood surface repairs
available in 500gm/1.5kg
Not suitable for wet areas or where structural movement occurs
![Sikasil Pool Neutral-Cure Silicone Sealant 300 ml [White]](//gluesaustralia.com.au/cdn/shop/files/Sikasil_pool_white.webp?v=1760227901&width=645)
![Sugru Mouldable Glue - 3 Pack [Black White Grey]](//gluesaustralia.com.au/cdn/shop/files/4063565057892.jpg?v=1754724118&width=645)
![Sugru Mouldable Glue - 3 Pack [Black White Red]](//gluesaustralia.com.au/cdn/shop/files/4063565066757.jpg?v=1754724118&width=645)
![T-Rex Ferociously Strong Tape UV Resistant With Knit Cloth [27.4m]](//gluesaustralia.com.au/cdn/shop/files/040074023437N_e5aad737-db85-4e62-bf16-291c599f76e3.jpg?v=1754716410&width=645)
![T-Rex Ferociously Strong Tape UV Resistant With Knit Cloth [27.4m]](//gluesaustralia.com.au/cdn/shop/files/04007_dddd7c02-55b5-4bc6-ae35-61e0db1a57f7.jpg?v=1754716410&width=645)
![T-Rex Ferociously Strong Tape UV Resistant With Knit Cloth [9.14m]](//gluesaustralia.com.au/cdn/shop/files/075353964668N_2b5bb515-b170-4a54-a924-8fcf58683e02.jpg?v=1754716416&width=645)
![T-Rex Ferociously Strong Tape UV Resistant With Knit Cloth [9.14m]](//gluesaustralia.com.au/cdn/shop/files/04007_14cbee25-54b9-43ad-a832-e4231871625b.jpg?v=1754716416&width=645)
![Timbermate Woodfiller putty crack filler Interior 2Kg [Jarrah]](//gluesaustralia.com.au/cdn/shop/files/9315284002000.jpg?v=1754811488&width=645)
![Tommy Tape Self Fusing Silicone Tape Seals And Repairs Waterproof Insulates [3 Pack]](//gluesaustralia.com.au/cdn/shop/files/9315284530374_556be8c2-fd79-4d44-bfb3-029f3b567466.jpg?v=1754716329&width=645)
![Tommy Tape Self Fusing Silicone Tape Seals And Repairs Waterproof Insulates [3 Pack]](//gluesaustralia.com.au/cdn/shop/files/93152845.png?v=1754716329&width=645)
![Tommy Tape Self Fusing Silicone Tape Seals And Repairs Waterproof Insulates [Black x 3m]](//gluesaustralia.com.au/cdn/shop/files/9315284530305_0485e2cc-4f7e-46c2-94ae-dee297210481.jpg?v=1754716346&width=645)
![Tommy Tape Self Fusing Silicone Tape Seals And Repairs Waterproof Insulates [Black x 3m]](//gluesaustralia.com.au/cdn/shop/files/93152845_50821584-e9cf-45b6-9528-1e997cfe48d7.png?v=1754716346&width=645)
![Tommy Tape Self Fusing Silicone Tape Seals And Repairs Waterproof Insulates [Clear x 3m]](//gluesaustralia.com.au/cdn/shop/files/949_1003_d0705a81-d0df-43a8-b8d2-cd06f5c78769.jpg?v=1754716354&width=645)
![Tommy Tape Self Fusing Silicone Tape Seals And Repairs Waterproof Insulates [Clear x 3m]](//gluesaustralia.com.au/cdn/shop/files/93152845_733528b0-7c24-46e0-889e-87698aafcb17.png?v=1754716354&width=645)
![Tommy Tape Self Fusing Silicone Tape Seals And Repairs Waterproof Insulates [Grey x 3m]](//gluesaustralia.com.au/cdn/shop/files/949_1004_b7e3fa7f-b596-4427-b05e-1d6d905aafa9.jpg?v=1754716362&width=645)
![Tommy Tape Self Fusing Silicone Tape Seals And Repairs Waterproof Insulates [Grey x 3m]](//gluesaustralia.com.au/cdn/shop/files/93152845_5bffff98-306e-4768-8b68-890bdca140bb.png?v=1754716362&width=645)
![Tommy Tape Self Fusing Silicone Tape Seals And Repairs Waterproof Insulates [Red x 3m]](//gluesaustralia.com.au/cdn/shop/files/949_1002_13c9931e-09ce-4d00-a35f-0df6977453aa.jpg?v=1754716370&width=645)
![Tommy Tape Self Fusing Silicone Tape Seals And Repairs Waterproof Insulates [Red x 3m]](//gluesaustralia.com.au/cdn/shop/files/93152845_54ba8b96-b758-4a94-8ba2-6b524d94e6ea.png?v=1754716370&width=645)
![Tommy Tape Self Fusing Silicone Tape Seals And Repairs Waterproof Insulates [White x 3m]](//gluesaustralia.com.au/cdn/shop/files/9315284530329_412e3d45-40a8-4eca-9ed6-191f389472d4.jpg?v=1754716380&width=645)
![Tommy Tape Self Fusing Silicone Tape Seals And Repairs Waterproof Insulates [White x 3m]](//gluesaustralia.com.au/cdn/shop/files/93152845_0ee281c8-0366-40a5-bb6c-b1a12d613ac2.png?v=1754716380&width=645)
![Sikasil Pool Neutral-Cure Silicone Sealant 300 ml [White]](http://gluesaustralia.com.au/cdn/shop/files/Sikasil_pool_white.webp?v=1760227901&width=645)
![Sugru Mouldable Glue - 3 Pack [Black White Grey]](http://gluesaustralia.com.au/cdn/shop/files/4063565057892.jpg?v=1754724118&width=645)
![Sugru Mouldable Glue - 3 Pack [Black White Red]](http://gluesaustralia.com.au/cdn/shop/files/4063565066757.jpg?v=1754724118&width=645)
![T-Rex Ferociously Strong Tape UV Resistant With Knit Cloth [27.4m]](http://gluesaustralia.com.au/cdn/shop/files/040074023437N_e5aad737-db85-4e62-bf16-291c599f76e3.jpg?v=1754716410&width=645)
![T-Rex Ferociously Strong Tape UV Resistant With Knit Cloth [27.4m]](http://gluesaustralia.com.au/cdn/shop/files/04007_dddd7c02-55b5-4bc6-ae35-61e0db1a57f7.jpg?v=1754716410&width=645)
![T-Rex Ferociously Strong Tape UV Resistant With Knit Cloth [9.14m]](http://gluesaustralia.com.au/cdn/shop/files/075353964668N_2b5bb515-b170-4a54-a924-8fcf58683e02.jpg?v=1754716416&width=645)
![T-Rex Ferociously Strong Tape UV Resistant With Knit Cloth [9.14m]](http://gluesaustralia.com.au/cdn/shop/files/04007_14cbee25-54b9-43ad-a832-e4231871625b.jpg?v=1754716416&width=645)
![Timbermate Woodfiller putty crack filler Interior 2Kg [Jarrah]](http://gluesaustralia.com.au/cdn/shop/files/9315284002000.jpg?v=1754811488&width=645)
![Tommy Tape Self Fusing Silicone Tape Seals And Repairs Waterproof Insulates [3 Pack]](http://gluesaustralia.com.au/cdn/shop/files/9315284530374_556be8c2-fd79-4d44-bfb3-029f3b567466.jpg?v=1754716329&width=645)
![Tommy Tape Self Fusing Silicone Tape Seals And Repairs Waterproof Insulates [3 Pack]](http://gluesaustralia.com.au/cdn/shop/files/93152845.png?v=1754716329&width=645)
![Tommy Tape Self Fusing Silicone Tape Seals And Repairs Waterproof Insulates [Black x 3m]](http://gluesaustralia.com.au/cdn/shop/files/9315284530305_0485e2cc-4f7e-46c2-94ae-dee297210481.jpg?v=1754716346&width=645)
![Tommy Tape Self Fusing Silicone Tape Seals And Repairs Waterproof Insulates [Black x 3m]](http://gluesaustralia.com.au/cdn/shop/files/93152845_50821584-e9cf-45b6-9528-1e997cfe48d7.png?v=1754716346&width=645)
![Tommy Tape Self Fusing Silicone Tape Seals And Repairs Waterproof Insulates [Clear x 3m]](http://gluesaustralia.com.au/cdn/shop/files/949_1003_d0705a81-d0df-43a8-b8d2-cd06f5c78769.jpg?v=1754716354&width=645)
![Tommy Tape Self Fusing Silicone Tape Seals And Repairs Waterproof Insulates [Clear x 3m]](http://gluesaustralia.com.au/cdn/shop/files/93152845_733528b0-7c24-46e0-889e-87698aafcb17.png?v=1754716354&width=645)
![Tommy Tape Self Fusing Silicone Tape Seals And Repairs Waterproof Insulates [Grey x 3m]](http://gluesaustralia.com.au/cdn/shop/files/949_1004_b7e3fa7f-b596-4427-b05e-1d6d905aafa9.jpg?v=1754716362&width=645)
![Tommy Tape Self Fusing Silicone Tape Seals And Repairs Waterproof Insulates [Grey x 3m]](http://gluesaustralia.com.au/cdn/shop/files/93152845_5bffff98-306e-4768-8b68-890bdca140bb.png?v=1754716362&width=645)
![Tommy Tape Self Fusing Silicone Tape Seals And Repairs Waterproof Insulates [Red x 3m]](http://gluesaustralia.com.au/cdn/shop/files/949_1002_13c9931e-09ce-4d00-a35f-0df6977453aa.jpg?v=1754716370&width=645)
![Tommy Tape Self Fusing Silicone Tape Seals And Repairs Waterproof Insulates [Red x 3m]](http://gluesaustralia.com.au/cdn/shop/files/93152845_54ba8b96-b758-4a94-8ba2-6b524d94e6ea.png?v=1754716370&width=645)
![Tommy Tape Self Fusing Silicone Tape Seals And Repairs Waterproof Insulates [White x 3m]](http://gluesaustralia.com.au/cdn/shop/files/9315284530329_412e3d45-40a8-4eca-9ed6-191f389472d4.jpg?v=1754716380&width=645)
![Tommy Tape Self Fusing Silicone Tape Seals And Repairs Waterproof Insulates [White x 3m]](http://gluesaustralia.com.au/cdn/shop/files/93152845_0ee281c8-0366-40a5-bb6c-b1a12d613ac2.png?v=1754716380&width=645)
