In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Boyle Mosaic Craft Adhesive Glue Paste 120 g is a reliable ready to use craft adhesive paste for mosaic and small decor pieces chosen for home repairs, trade work, and craft builds when you want a bond you can trust. Designed for Australian conditions, it balances strength, ease of use, and clean application so you can get professional results without special tools. The 120 g pack is ideal for general work and keeps neatly in a toolbox or caddy.
Why choose Boyle Mosaic for your next project
Everyday jobs often involve mixed materials and imperfect surfaces. Boyle Mosaic Craft Adhesive Glue Paste 120 g has been formulated to wet out well, grab quickly, and cure to a tough finish that resists movement and contact stress. It maintains bond integrity across common temperature swings and has dependable resistance to moisture and most household chemicals. Whether you are fixing, building, sealing, or assembling, this product gives you confidence from first squeeze through final set.
Best for
Mounting glass tesserae and small tiles to bases
Decorating frames, pots, and plaques
Craft classes and school projects
Suitable surfaces
The adhesive works well on the following surface types when properly prepared:
Terracotta and ceramic bases
Primed timber
Card and board
Glass and stone pieces
Surface preparation
Good preparation is the key to a long lasting repair. Remove loose material, dust, and grease. Wipe glossy areas with methylated spirits or an approved cleaner and allow to dry. On very smooth plastics and metals, lightly roughen with fine abrasive paper to give the adhesive a mechanical key. Dry fit parts first and mark alignment points so you can assemble accurately within the open time. If bonding porous materials, ensure both faces are dry and free of surface chalking.
How to use
Check fit and plan clamping. Do a trial run without adhesive so you know the order of steps.
Apply a thin, continuous bead to one surface. For wide pieces, use a zig zag pattern to maximise wetting.
Bring surfaces together within the stated open time of workable for extended craft sessions. Reseat once if needed, then hold steady.
Apply even pressure using clamps, tape, weights, or temporary fasteners. Avoid squeezing all adhesive out of the joint.
Allow to cure undisturbed. Initial handling strength will develop as the adhesive sets, with a full cure reached based on the chemistry described below.
Cure profile
Initial grab holds pieces in place while you continue working. Allow to dry fully before grouting or moving finished items.
Temperature and environmental performance
Use in dry indoor conditions for best results. Avoid application to very cold, sweating, or waterlogged surfaces. For outdoor use protect fresh bonds from rain until the skin has formed and the core has progressed in cure. Once fully cured, the bond resists normal weathering, splash water, and intermittent UV exposure based on the substrate and paint systems used.
Clean up and finishing
Wipe away fresh squeeze out with a damp cloth. Wash brushes in warm soapy water. When cured, excess can be carefully trimmed or sanded. For painted finishes, allow the adhesive to fully cure before priming. Test paint on a small area to confirm compatibility and drying behaviour.
Coverage guide
Coverage varies with bead size, surface porosity, and technique. As a general guide, a 3 mm bead yields approximately 10 to 12 linear meters per 310 mL cartridge. Smaller packs scale proportionally. Gaps, rough edges, and highly absorbent materials will reduce coverage. Plan an extra margin for offcuts and practice passes.
Tips for best results
Work within the recommended open time so the adhesive can properly wet the surfaces.
Use light clamping pressure to keep parts aligned while maintaining a film thickness for strength.
For very porous substrates, apply a thin precoat as a primer layer and allow it to tack before final assembly.
Keep joint lines clean by masking edges with painter tape and removing it before the adhesive skins.
Where movement or vibration is expected, design the joint to share load across a large area.
Troubleshooting
Poor adhesion: Check for oil, release agents, or surface dust. Reclean and lightly abrade if necessary.
Slow cure: Low temperature and low humidity extend cure time. Maintain moderate conditions for best results.
Visible squeeze out: Wipe fresh material with a suitable solvent and a soft cloth. Once cured, trim carefully.
Bond line prints through paint: Allow a full cure, then prime and apply thin coats of paint, allowing proper drying between coats.
Storage and shelf life
Close lid firmly after use to prevent skinning. Store at room temperature. Always check the pack for a lot code and use by guidance. Reseal immediately after use and store upright. Dispose of empty containers responsibly.
Safety
Read the label before use. Wear gloves when handling uncured material. Provide ventilation in enclosed areas. Avoid contact with skin and eyes. Keep out of reach of children and pets. If sensitivity occurs, stop use and seek advice. Do not ingest. First aid directions and detailed handling information are available on the package and the safety data sheet.
Frequently asked questions
Can I bond dissimilar materials? Yes, provided each surface is clean and sound. Differences in expansion are managed by the adhesive film thickness and the inherent flexibility after cure.
Is clamping required? Light clamping improves alignment and final strength. Excessive pressure can starve the joint of adhesive which reduces performance.
Is the bond water resistant? Once cured the bond resists splash water and routine humidity. For permanent immersion choose an adhesive designed for underwater service and follow the manufacturer guidance.
Planning your job
Measure twice and cut once. Dry assemble parts so you can confirm squareness and alignment before adhesive is involved. Keep rags, clamps, and spacers ready. If you are new to the product, test on offcuts to get a feel for bead size and squeeze out. A consistent 1 to 2 mm bond line is a good starting point for most rigid materials. Thicker lines help when surfaces are uneven. Avoid starving the joint by pressing too hard without giving the adhesive a place to reside.
Responsible use
Choose an adhesive that suits the materials and the environment the finished piece will face. If a joint will be submerged, carry structural loads, or be exposed to strong chemicals, check the technical data sheet for specific guidance. Many general purpose products are perfect for day to day work, while specialised tasks call for a system designed and tested for that environment. Using the right product first saves time, money, and rework.
Aftercare and maintenance
Adhesive joints are remarkably strong when used correctly. Design repairs so that routine loads are shared across a generous area. Where heavy vibration is present, pair the adhesive bond with appropriate mechanical fasteners. Keep cleaning chemicals mild, and avoid abrasive pads on visible joints. If a bond will be repainted, choose flexible paint where movement is expected, and keep edges sealed to prevent dirt tracking along the bond line.
Recycling and disposal
Allow empty containers to cure before disposal. Check local council guidance for recycling of plastics and metal cartridges. Never pour uncured product into drains or soil. Wipe tools on scrap material and let residue harden before placing in general waste. Smart handling keeps the workspace clean and reduces environmental impact.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Strengthen joints, seams, and repairs with this tough fibreglass mesh tape. It helps prevent hairline cracks, improves bond strength, and delivers a smooth base for top coats on plasterboard and cement sheet surfaces.
Why you will like it
Reinforces joints to reduce cracking around seams and patches
Open mesh allows compound to key through for a strong bond
Clean edges for easy alignment along butt and tapered joins
50mm width suits standard plasterboard seams and corner work
20m roll is great for rooms, small renos, and ongoing touch ups
Great for
Plasterboard joins and butt joints
Repairs around door and window openings
Ceiling crack reinforcement
Patching holes and dents before finishing
Use with base coat and top coat compounds
How to use
Ensure the surface is clean, dry, and free of dust.
Lay the tape centered over the joint or crack, pressing to seat it flat.
Apply a generous first coat of compound through the mesh and let it dry.
Feather additional coats wider than the last until flush with the surface.
Sand lightly once dry, then prime and paint.
Specifications
Brand: Builders Edge
Type: Fibreglass joint reinforcement tape
Width: 50 mm
Length: 20 m
Material: Fibreglass mesh
Colour: White
Tips
For best results, keep the tape flat with no bubbles before coating.
Use a wider knife on each subsequent coat to blend the repair.
Allow full dry time between coats to avoid shrinkage lines.
Glues Australia helps Australians fix, build, and finish with confidence.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Cabot's Wood Tone Putty is ideal for filling holes, cracks and blemishes in all interior timber without shrinking. It is easy to apply and sands to a fine, smooth finish. Wood Tone Putty is compatible with water or oil based paints, stains and timber finishes.
Areas
All interior timber
Clean Up Water
Product Type Water Based
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Finish off any sealing projects with precision and accuracy using a cleverly designed caulking gun. Supporting most standard sized caulk and sealer cartridges in a sturdy steel frame, this gun is perfect for achieving smooth, clean results each and every time. Equip with a comfortable grip for controlled application, the caulking gun is ideal for any DIY aficionado producing quality professional edges, corners and joins.
Durable steel frame
Comfortable grip
Fits most caulk and sealer cylinders
Strong sturdy steel rod and quick-release system
Suitable for light to medium sealant applications
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Stylish metal-finish adhesive hooks for a premium look without drilling.
Modern finish elevates decor
Strong hold on smooth surfaces
Removes cleanly when needed
Examples of use:
Hang hats and bags in entryways
Hold bath towels in style
Organise accessories in wardrobes
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Spring-grip holder secures brooms and mops vertically to save floor space.
Non-slip clamp holds 1.8 kg
Adhesive mount removes cleanly
Ideal for laundries and cupboards
Examples of use:
Hang a broom inside a pantry door
Store a mop in the laundry
Keep garden tools tidy in the shed
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Damage-free picture hanging strips for clean, strong holds on flat surfaces.
No nails, no residue on removal
Holds frames level
Suitable for painted walls and most smooth surfaces
Examples of use:
Mount family photos or art frames
Hang lightweight notice boards
Create gallery walls without drilling
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Damage-free picture hanging strips for clean, strong holds on flat surfaces.
No nails, no residue on removal
Holds frames level
Suitable for painted walls and most smooth surfaces
Examples of use:
Mount family photos or art frames
Hang lightweight notice boards
Create gallery walls without drilling
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Damage-free picture hanging strips for clean, strong holds on flat surfaces.
No nails, no residue on removal
Holds frames level
Suitable for painted walls and most smooth surfaces
Examples of use:
Mount family photos or art frames
Hang lightweight notice boards
Create gallery walls without drilling
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Damage-free picture hanging strips for clean, strong holds on flat surfaces.
No nails, no residue on removal
Holds frames level
Suitable for painted walls and most smooth surfaces
Examples of use:
Mount family photos or art frames
Hang lightweight notice boards
Create gallery walls without drilling
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Damage-free picture hanging strips for clean, strong holds on flat surfaces.
No nails, no residue on removal
Holds frames level
Suitable for painted walls and most smooth surfaces
Examples of use:
Mount family photos or art frames
Hang lightweight notice boards
Create gallery walls without drilling
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Can I use Command™ Products on glass windows?
It is okay to use Command™ Products if the glass is not exposed to direct sunlight and not flooded with water. For glass shower doors use our special Water-Resistant line of products (blue strip) which are clearly marked on our packaging.
Will Command™ Products stick to brick?
No. Command™ Products are intended for mostly smooth surfaces such as those listed above. However, our products will stick to painted, smooth cinder block (the type found inside many school and office buildings).
Can I use Command™ Products on fresh paint?
Paint should be fully cured (check paint can for manufacturer's cure time) before using Command Products. We recommend waiting 28 days before use on fresh paint. Also, alcohol may remove or dull the surface of fresh paint.
Can I use Command™ Products on wallpaper?
No. Most wallpapers are too delicate and can tear when adhesives are applied.
Will it hold soundproofing acoustic foam board or decorative plates?
Yes, provided the item is within the weight limit specified for Command™ Picture Hanging Strips. We do not recommend hanging tapestry or other fabrics. For decorative plates, please ensure there is a smooth surface for the strip to adhere to. Do not hang valuable or irreplaceable items.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Can I use Command™ Products on glass windows?
It is okay to use Command™ Products if the glass is not exposed to direct sunlight and not flooded with water. For glass shower doors use our special Water-Resistant line of products (blue strip) which are clearly marked on our packaging.
Will Command™ Products stick to brick?
No. Command™ Products are intended for mostly smooth surfaces such as those listed above. However, our products will stick to painted, smooth cinder block (the type found inside many school and office buildings).
Can I use Command™ Products on fresh paint?
Paint should be fully cured (check paint can for manufacturer's cure time) before using Command Products. We recommend waiting 28 days before use on fresh paint. Also, alcohol may remove or dull the surface of fresh paint.
Can I use Command™ Products on wallpaper?
No. Most wallpapers are too delicate and can tear when adhesives are applied.
Will it hold soundproofing acoustic foam board or decorative plates?
Yes, provided the item is within the weight limit specified for Command™ Picture Hanging Strips. We do not recommend hanging tapestry or other fabrics. For decorative plates, please ensure there is a smooth surface for the strip to adhere to. Do not hang valuable or irreplaceable items.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Bathroom caddy accessory that mounts without drilling for tidy storage.
Water-resistant adhesive
Rust-free design
Removes cleanly from tiles and glass
Examples of use:
Hold soap and sponges at the sink
Keep shower gels within reach
Organise shaving accessories
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Can I use Command™ Products on glass windows?
It is okay to use Command™ Products if the glass is not exposed to direct sunlight and not flooded with water. For glass shower doors use our special Water-Resistant line of products (blue strip) which are clearly marked on our packaging.
Will Command™ Products stick to brick?
No. Command™ Products are intended for mostly smooth surfaces such as those listed above. However, our products will stick to painted, smooth cinder block (the type found inside many school and office buildings).
Can I use Command™ Products on fresh paint?
Paint should be fully cured (check paint can for manufacturer's cure time) before using Command Products. We recommend waiting 28 days before use on fresh paint. Also, alcohol may remove or dull the surface of fresh paint.
Can I use Command™ Products on wallpaper?
No. Most wallpapers are too delicate and can tear when adhesives are applied.
Will it hold soundproofing acoustic foam board or decorative plates?
Yes, provided the item is within the weight limit specified for Command™ Picture Hanging Strips. We do not recommend hanging tapestry or other fabrics. For decorative plates, please ensure there is a smooth surface for the strip to adhere to. Do not hang valuable or irreplaceable items.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Stylish metal-finish adhesive hooks for a premium look without drilling.
Modern finish elevates decor
Strong hold on smooth surfaces
Removes cleanly when needed
Examples of use:
Hang hats and bags in entryways
Hold bath towels in style
Organise accessories in wardrobes
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Clear clips for routing lights and small cables with near-invisible finish.
Low-profile and clear
Adhesive removes cleanly
Includes extra strips for repositioning
Examples of use:
Outline a window with fairy lights
Hold LED string lights along a pergola
Tidy USB cables on a desk edge
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Round adhesive clips to guide and tame charging or appliance cords.
Keeps cables in place
Damage-free removal
Blends with modern setups
Examples of use:
Route a phone charger behind a nightstand
Secure a lamp cord to a skirting board
Organise USB leads near a workstation
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Can I use Command™ Products on glass windows?
It is okay to use Command™ Products if the glass is not exposed to direct sunlight and not flooded with water. For glass shower doors use our special Water-Resistant line of products (blue strip) which are clearly marked on our packaging.
Will Command™ Products stick to brick?
No. Command™ Products are intended for mostly smooth surfaces such as those listed above. However, our products will stick to painted, smooth cinder block (the type found inside many school and office buildings).
Can I use Command™ Products on fresh paint?
Paint should be fully cured (check paint can for manufacturer's cure time) before using Command Products. We recommend waiting 28 days before use on fresh paint. Also, alcohol may remove or dull the surface of fresh paint.
Can I use Command™ Products on wallpaper?
No. Most wallpapers are too delicate and can tear when adhesives are applied.
Will it hold soundproofing acoustic foam board or decorative plates?
Yes, provided the item is within the weight limit specified for Command™ Picture Hanging Strips. We do not recommend hanging tapestry or other fabrics. For decorative plates, please ensure there is a smooth surface for the strip to adhere to. Do not hang valuable or irreplaceable items.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Adhesive holders to support lightweight curtain rods on smooth walls.
Tool-free install
Damage-free removal
Fits slim curtain poles
Examples of use:
Mount sheer curtains in rentals
Create a cafe curtain over a sink
Add a rod to a study nook
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Can I use Command™ Products on glass windows?
It is okay to use Command™ Products if the glass is not exposed to direct sunlight and not flooded with water. For glass shower doors use our special Water-Resistant line of products (blue strip) which are clearly marked on our packaging.
Will Command™ Products stick to brick?
No. Command™ Products are intended for mostly smooth surfaces such as those listed above. However, our products will stick to painted, smooth cinder block (the type found inside many school and office buildings).
Can I use Command™ Products on fresh paint?
Paint should be fully cured (check paint can for manufacturer's cure time) before using Command Products. We recommend waiting 28 days before use on fresh paint. Also, alcohol may remove or dull the surface of fresh paint.
Can I use Command™ Products on wallpaper?
No. Most wallpapers are too delicate and can tear when adhesives are applied.
Will it hold soundproofing acoustic foam board or decorative plates?
Yes, provided the item is within the weight limit specified for Command™ Picture Hanging Strips. We do not recommend hanging tapestry or other fabrics. For decorative plates, please ensure there is a smooth surface for the strip to adhere to. Do not hang valuable or irreplaceable items.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Specialised hanger for canvas frames with stable, centred support.
Designed for canvas bars
Level hold without nails
Removes cleanly
Examples of use:
Hang stretched canvas art
Display craft canvases
Rotate gallery pieces without patching holes
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Picture hanger engineered for wire-back or sawtooth frames with stable support.
Quick stick-on install
Clean removal with no wall damage
Keeps frames level
Examples of use:
Hang framed art and certificates
Display mirrors within weight rating
Mount signage in halls
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Can I use Command™ Products on glass windows?
It is okay to use Command™ Products if the glass is not exposed to direct sunlight and not flooded with water. For glass shower doors use our special Water-Resistant line of products (blue strip) which are clearly marked on our packaging.
Will Command™ Products stick to brick?
No. Command™ Products are intended for mostly smooth surfaces such as those listed above. However, our products will stick to painted, smooth cinder block (the type found inside many school and office buildings).
Can I use Command™ Products on fresh paint?
Paint should be fully cured (check paint can for manufacturer's cure time) before using Command Products. We recommend waiting 28 days before use on fresh paint. Also, alcohol may remove or dull the surface of fresh paint.
Can I use Command™ Products on wallpaper?
No. Most wallpapers are too delicate and can tear when adhesives are applied.
Will it hold soundproofing acoustic foam board or decorative plates?
Yes, provided the item is within the weight limit specified for Command™ Picture Hanging Strips. We do not recommend hanging tapestry or other fabrics. For decorative plates, please ensure there is a smooth surface for the strip to adhere to. Do not hang valuable or irreplaceable items.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Can I use Command™ Products on glass windows?
It is okay to use Command™ Products if the glass is not exposed to direct sunlight and not flooded with water. For glass shower doors use our special Water-Resistant line of products (blue strip) which are clearly marked on our packaging.
Will Command™ Products stick to brick?
No. Command™ Products are intended for mostly smooth surfaces such as those listed above. However, our products will stick to painted, smooth cinder block (the type found inside many school and office buildings).
Can I use Command™ Products on fresh paint?
Paint should be fully cured (check paint can for manufacturer's cure time) before using Command Products. We recommend waiting 28 days before use on fresh paint. Also, alcohol may remove or dull the surface of fresh paint.
Can I use Command™ Products on wallpaper?
No. Most wallpapers are too delicate and can tear when adhesives are applied.
Will it hold soundproofing acoustic foam board or decorative plates?
Yes, provided the item is within the weight limit specified for Command™ Picture Hanging Strips. We do not recommend hanging tapestry or other fabrics. For decorative plates, please ensure there is a smooth surface for the strip to adhere to. Do not hang valuable or irreplaceable items.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
High-capacity adhesive hook or strip for heavier household items.
Big hold with clean removal
For smooth, sealed surfaces
No nails or screws required
Examples of use:
Hang large frames within rating
Hold bulky robes or bags
Mount organisers or small shelves
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Damage-free picture hanging strips for clean, strong holds on flat surfaces.
No nails, no residue on removal
Holds frames level
Suitable for painted walls and most smooth surfaces
Examples of use:
Mount family photos or art frames
Hang lightweight notice boards
Create gallery walls without drilling
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Can I use Command™ Products on glass windows?
It is okay to use Command™ Products if the glass is not exposed to direct sunlight and not flooded with water. For glass shower doors use our special Water-Resistant line of products (blue strip) which are clearly marked on our packaging.
Will Command™ Products stick to brick?
No. Command™ Products are intended for mostly smooth surfaces such as those listed above. However, our products will stick to painted, smooth cinder block (the type found inside many school and office buildings).
Can I use Command™ Products on fresh paint?
Paint should be fully cured (check paint can for manufacturer's cure time) before using Command Products. We recommend waiting 28 days before use on fresh paint. Also, alcohol may remove or dull the surface of fresh paint.
Can I use Command™ Products on wallpaper?
No. Most wallpapers are too delicate and can tear when adhesives are applied.
Will it hold soundproofing acoustic foam board or decorative plates?
Yes, provided the item is within the weight limit specified for Command™ Picture Hanging Strips. We do not recommend hanging tapestry or other fabrics. For decorative plates, please ensure there is a smooth surface for the strip to adhere to. Do not hang valuable or irreplaceable items.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
High-capacity adhesive hook or strip for heavier household items.
Big hold with clean removal
For smooth, sealed surfaces
No nails or screws required
Examples of use:
Hang large frames within rating
Hold bulky robes or bags
Mount organisers or small shelves
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Can I use Command™ Products on glass windows?
It is okay to use Command™ Products if the glass is not exposed to direct sunlight and not flooded with water. For glass shower doors use our special Water-Resistant line of products (blue strip) which are clearly marked on our packaging.
Will Command™ Products stick to brick?
No. Command™ Products are intended for mostly smooth surfaces such as those listed above. However, our products will stick to painted, smooth cinder block (the type found inside many school and office buildings).
Can I use Command™ Products on fresh paint?
Paint should be fully cured (check paint can for manufacturer's cure time) before using Command Products. We recommend waiting 28 days before use on fresh paint. Also, alcohol may remove or dull the surface of fresh paint.
Can I use Command™ Products on wallpaper?
No. Most wallpapers are too delicate and can tear when adhesives are applied.
Will it hold soundproofing acoustic foam board or decorative plates?
Yes, provided the item is within the weight limit specified for Command™ Picture Hanging Strips. We do not recommend hanging tapestry or other fabrics. For decorative plates, please ensure there is a smooth surface for the strip to adhere to. Do not hang valuable or irreplaceable items.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Picture hanger engineered for wire-back or sawtooth frames with stable support.
Quick stick-on install
Clean removal with no wall damage
Keeps frames level
Examples of use:
Hang framed art and certificates
Display mirrors within weight rating
Mount signage in halls
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Can I use Command™ Products on glass windows?
It is okay to use Command™ Products if the glass is not exposed to direct sunlight and not flooded with water. For glass shower doors use our special Water-Resistant line of products (blue strip) which are clearly marked on our packaging.
Will Command™ Products stick to brick?
No. Command™ Products are intended for mostly smooth surfaces such as those listed above. However, our products will stick to painted, smooth cinder block (the type found inside many school and office buildings).
Can I use Command™ Products on fresh paint?
Paint should be fully cured (check paint can for manufacturer's cure time) before using Command Products. We recommend waiting 28 days before use on fresh paint. Also, alcohol may remove or dull the surface of fresh paint.
Can I use Command™ Products on wallpaper?
No. Most wallpapers are too delicate and can tear when adhesives are applied.
Will it hold soundproofing acoustic foam board or decorative plates?
Yes, provided the item is within the weight limit specified for Command™ Picture Hanging Strips. We do not recommend hanging tapestry or other fabrics. For decorative plates, please ensure there is a smooth surface for the strip to adhere to. Do not hang valuable or irreplaceable items.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Can I use Command™ Products on glass windows?
It is okay to use Command™ Products if the glass is not exposed to direct sunlight and not flooded with water. For glass shower doors use our special Water-Resistant line of products (blue strip) which are clearly marked on our packaging.
Will Command™ Products stick to brick?
No. Command™ Products are intended for mostly smooth surfaces such as those listed above. However, our products will stick to painted, smooth cinder block (the type found inside many school and office buildings).
Can I use Command™ Products on fresh paint?
Paint should be fully cured (check paint can for manufacturer's cure time) before using Command Products. We recommend waiting 28 days before use on fresh paint. Also, alcohol may remove or dull the surface of fresh paint.
Can I use Command™ Products on wallpaper?
No. Most wallpapers are too delicate and can tear when adhesives are applied.
Will it hold soundproofing acoustic foam board or decorative plates?
Yes, provided the item is within the weight limit specified for Command™ Picture Hanging Strips. We do not recommend hanging tapestry or other fabrics. For decorative plates, please ensure there is a smooth surface for the strip to adhere to. Do not hang valuable or irreplaceable items.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Can I use Command™ Products on glass windows?
It is okay to use Command™ Products if the glass is not exposed to direct sunlight and not flooded with water. For glass shower doors use our special Water-Resistant line of products (blue strip) which are clearly marked on our packaging.
Will Command™ Products stick to brick?
No. Command™ Products are intended for mostly smooth surfaces such as those listed above. However, our products will stick to painted, smooth cinder block (the type found inside many school and office buildings).
Can I use Command™ Products on fresh paint?
Paint should be fully cured (check paint can for manufacturer's cure time) before using Command Products. We recommend waiting 28 days before use on fresh paint. Also, alcohol may remove or dull the surface of fresh paint.
Can I use Command™ Products on wallpaper?
No. Most wallpapers are too delicate and can tear when adhesives are applied.
Will it hold soundproofing acoustic foam board or decorative plates?
Yes, provided the item is within the weight limit specified for Command™ Picture Hanging Strips. We do not recommend hanging tapestry or other fabrics. For decorative plates, please ensure there is a smooth surface for the strip to adhere to. Do not hang valuable or irreplaceable items.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Can I use Command™ Products on glass windows?
It is okay to use Command™ Products if the glass is not exposed to direct sunlight and not flooded with water. For glass shower doors use our special Water-Resistant line of products (blue strip) which are clearly marked on our packaging.
Will Command™ Products stick to brick?
No. Command™ Products are intended for mostly smooth surfaces such as those listed above. However, our products will stick to painted, smooth cinder block (the type found inside many school and office buildings).
Can I use Command™ Products on fresh paint?
Paint should be fully cured (check paint can for manufacturer's cure time) before using Command Products. We recommend waiting 28 days before use on fresh paint. Also, alcohol may remove or dull the surface of fresh paint.
Can I use Command™ Products on wallpaper?
No. Most wallpapers are too delicate and can tear when adhesives are applied.
Will it hold soundproofing acoustic foam board or decorative plates?
Yes, provided the item is within the weight limit specified for Command™ Picture Hanging Strips. We do not recommend hanging tapestry or other fabrics. For decorative plates, please ensure there is a smooth surface for the strip to adhere to. Do not hang valuable or irreplaceable items.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Can I use Command™ Products on glass windows?
It is okay to use Command™ Products if the glass is not exposed to direct sunlight and not flooded with water. For glass shower doors use our special Water-Resistant line of products (blue strip) which are clearly marked on our packaging.
Will Command™ Products stick to brick?
No. Command™ Products are intended for mostly smooth surfaces such as those listed above. However, our products will stick to painted, smooth cinder block (the type found inside many school and office buildings).
Can I use Command™ Products on fresh paint?
Paint should be fully cured (check paint can for manufacturer's cure time) before using Command Products. We recommend waiting 28 days before use on fresh paint. Also, alcohol may remove or dull the surface of fresh paint.
Can I use Command™ Products on wallpaper?
No. Most wallpapers are too delicate and can tear when adhesives are applied.
Will it hold soundproofing acoustic foam board or decorative plates?
Yes, provided the item is within the weight limit specified for Command™ Picture Hanging Strips. We do not recommend hanging tapestry or other fabrics. For decorative plates, please ensure there is a smooth surface for the strip to adhere to. Do not hang valuable or irreplaceable items.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
High-capacity adhesive hook or strip for heavier household items.
Big hold with clean removal
For smooth, sealed surfaces
No nails or screws required
Examples of use:
Hang large frames within rating
Hold bulky robes or bags
Mount organisers or small shelves
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
High-capacity adhesive hook or strip for heavier household items.
Big hold with clean removal
For smooth, sealed surfaces
No nails or screws required
Examples of use:
Hang large frames within rating
Hold bulky robes or bags
Mount organisers or small shelves
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Damage-free picture hanging strips for clean, strong holds on flat surfaces.
No nails, no residue on removal
Holds frames level
Suitable for painted walls and most smooth surfaces
Examples of use:
Mount family photos or art frames
Hang lightweight notice boards
Create gallery walls without drilling
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Specialised hanger for canvas frames with stable, centred support.
Designed for canvas bars
Level hold without nails
Removes cleanly
Examples of use:
Hang stretched canvas art
Display craft canvases
Rotate gallery pieces without patching holes
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Damage-free picture hanging strips for clean, strong holds on flat surfaces.
No nails, no residue on removal
Holds frames level
Suitable for painted walls and most smooth surfaces
Examples of use:
Mount family photos or art frames
Hang lightweight notice boards
Create gallery walls without drilling
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Replacement adhesive strips to reuse your existing Command hooks and hangers.
Fresh adhesive for reliable hold
Easy to apply and remove cleanly
Sized to fit matching hooks
Examples of use:
Refresh worn strips on bathroom hooks
Swap seasonal decor without new hardware
Rehang key rails and caddies
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Wet-area rated hanging solution for towels and robes.
Water-resistant adhesive
Designed for bathrooms and laundries
Simple, tool-free install
Examples of use:
Add a towel point near a vanity
Place a robe hook by the shower
Create a guest towel spot
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Can I use Command™ Products on glass windows?
It is okay to use Command™ Products if the glass is not exposed to direct sunlight and not flooded with water. For glass shower doors use our special Water-Resistant line of products (blue strip) which are clearly marked on our packaging.
Will Command™ Products stick to brick?
No. Command™ Products are intended for mostly smooth surfaces such as those listed above. However, our products will stick to painted, smooth cinder block (the type found inside many school and office buildings).
Can I use Command™ Products on fresh paint?
Paint should be fully cured (check paint can for manufacturer's cure time) before using Command Products. We recommend waiting 28 days before use on fresh paint. Also, alcohol may remove or dull the surface of fresh paint.
Can I use Command™ Products on wallpaper?
No. Most wallpapers are too delicate and can tear when adhesives are applied.
Will it hold soundproofing acoustic foam board or decorative plates?
Yes, provided the item is within the weight limit specified for Command™ Picture Hanging Strips. We do not recommend hanging tapestry or other fabrics. For decorative plates, please ensure there is a smooth surface for the strip to adhere to. Do not hang valuable or irreplaceable items.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Stylish metal-finish adhesive hooks for a premium look without drilling.
Modern finish elevates decor
Strong hold on smooth surfaces
Removes cleanly when needed
Examples of use:
Hang hats and bags in entryways
Hold bath towels in style
Organise accessories in wardrobes
![Boyle Glow In The Dark Sparkling Craft Glue Kids Safe 147ml [Colour: Green]](//gluesaustralia.com.au/cdn/shop/files/9314235_e4f50d8f-e0a6-4255-a242-9c3e7590f0f3.jpg?v=1754715675&width=645)
![Boyle Glow In The Dark Sparkling Craft Glue Kids Safe 147ml [Colour: Green]](//gluesaustralia.com.au/cdn/shop/files/9314235_e401b93c-d8cb-46ff-be50-3f30c2495024.jpg?v=1754715675&width=645)
![Boyle Glow In The Dark Sparkling Craft Glue Kids Safe 147ml [Colour: Orange]](//gluesaustralia.com.au/cdn/shop/files/9314235_fada9554-ceb7-411e-9690-c908a0973b94.jpg?v=1754715678&width=645)
![Boyle Glow In The Dark Sparkling Craft Glue Kids Safe 147ml [Colour: Orange]](//gluesaustralia.com.au/cdn/shop/files/9314235_b6829499-6c70-4712-bf76-ae02aa34ac1d.jpg?v=1754715678&width=645)
![Boyle Glow In The Dark Sparkling Craft Glue Kids Safe 147ml [Colour: Pink]](//gluesaustralia.com.au/cdn/shop/files/9314235_0fda3f36-74b9-4f76-87c5-eecf1c56afcc.jpg?v=1754715680&width=645)
![Boyle Glow In The Dark Sparkling Craft Glue Kids Safe 147ml [Colour: Pink]](//gluesaustralia.com.au/cdn/shop/files/9314235_3922d4f4-2f1d-4263-a2de-14b767df10ba.jpg?v=1754715681&width=645)
![Cabot's Wood Tone Putty Hole Filler 250g [Colour: Radiata Pine]](//gluesaustralia.com.au/cdn/shop/files/9300611074089.jpg?v=1754724095&width=645)
![Cabot's Wood Tone Putty Hole Filler 90g [Colour: Antique Walnut]](//gluesaustralia.com.au/cdn/shop/files/93355766.jpg?v=1754724095&width=645)
![Boyle Glow In The Dark Sparkling Craft Glue Kids Safe 147ml [Colour: Green]](http://gluesaustralia.com.au/cdn/shop/files/9314235_e4f50d8f-e0a6-4255-a242-9c3e7590f0f3.jpg?v=1754715675&width=645)
![Boyle Glow In The Dark Sparkling Craft Glue Kids Safe 147ml [Colour: Green]](http://gluesaustralia.com.au/cdn/shop/files/9314235_e401b93c-d8cb-46ff-be50-3f30c2495024.jpg?v=1754715675&width=645)
![Boyle Glow In The Dark Sparkling Craft Glue Kids Safe 147ml [Colour: Orange]](http://gluesaustralia.com.au/cdn/shop/files/9314235_fada9554-ceb7-411e-9690-c908a0973b94.jpg?v=1754715678&width=645)
![Boyle Glow In The Dark Sparkling Craft Glue Kids Safe 147ml [Colour: Orange]](http://gluesaustralia.com.au/cdn/shop/files/9314235_b6829499-6c70-4712-bf76-ae02aa34ac1d.jpg?v=1754715678&width=645)
![Boyle Glow In The Dark Sparkling Craft Glue Kids Safe 147ml [Colour: Pink]](http://gluesaustralia.com.au/cdn/shop/files/9314235_0fda3f36-74b9-4f76-87c5-eecf1c56afcc.jpg?v=1754715680&width=645)
![Boyle Glow In The Dark Sparkling Craft Glue Kids Safe 147ml [Colour: Pink]](http://gluesaustralia.com.au/cdn/shop/files/9314235_3922d4f4-2f1d-4263-a2de-14b767df10ba.jpg?v=1754715681&width=645)
![Cabot's Wood Tone Putty Hole Filler 250g [Colour: Radiata Pine]](http://gluesaustralia.com.au/cdn/shop/files/9300611074089.jpg?v=1754724095&width=645)
![Cabot's Wood Tone Putty Hole Filler 90g [Colour: Antique Walnut]](http://gluesaustralia.com.au/cdn/shop/files/93355766.jpg?v=1754724095&width=645)
