In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Betta TileCare Tile & Grout Cleaner is a powerful, ready-to-use solution designed to effectively remove ingrained dirt, grease, grime, and oil deposits from tiled surfaces without causing damage. Its fast-acting, biodegradable, and non-caustic formula makes it both user-friendly and environmentally responsible.
Surface Preparation:
Ensure the surface is free from dust and loose materials before cleaning.
Application Instructions:
Spray Betta TileCare Tile & Grout Cleaner directly onto the affected area.
Vigorously scrub the area with a stiff brush to lift dirt and grime.
For heavily soiled surfaces, repeat the application as necessary until the stain is removed.
Coverage:
Approximately 3 to 4 square meters per liter.
Drying Time:
Allow the cleaned area to dry completely before use.
Cleanup:
After scrubbing, leave the solution on the surface for 5 to 10 minutes, then rinse thoroughly with water. Do not allow the cleaner to fully dry before rinsing.
Technical Data:
Appearance: Clear liquid
pH Level: Neutral
Solubility: Fully water-soluble
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Betta Tile Care Tile & Grout Sealer
Betta Tilecare Tile & Grout Sealer waterproofs porous tiles and grout without leaving a slippery film coating.
Drying Time:
Recoat: 15 minutes
Full Dry: 24 hours
Coverage:
1L covers 5-10m²
Finishes:
White in the pail, dries clear
Ideal For:
New & old grout (clean)
Unsealed and/or porous tiles
Application Method & Cleanup:
Tools: Paint brush, roller, pump spray
Features:
Water-based
Clear penetrating finish
Invisible moisture-repellent
Easy to use
Proven technology
Non-slip
Preparation:
Remove silicone sealant strips and soap build-up.
Clean mould off tiles and grout using Betta Tilecare Mould Rid™ or bleach.
Rinse thoroughly with water after cleaning.
Patch any loose or missing tile grout. For improved results, use Bondall HydroCrete as a grout additive.
Ensure the application area is dry for 12-24 hours before applying Tile & Grout Sealer.
For porous surfaces or after high-pressure washing, allow 3-4 days drying time before applying the sealer.
Application:
Start at the top of the wall and brush Tile & Grout Sealer liberally over the tiles and grout.
Finish with the shower base or floor, ensuring thorough application to all surfaces.
Drying:
Allow 15 minutes for the first application to react, then reapply over the entire area.
After the second application, wait 15 minutes for penetration, then wipe off any excess with a dry cloth.
Allow 24 hours for full drying before use.
Betta Tilecare Tile & Grout Sealer is the perfect solution for sealing and protecting both new and old grout, ensuring your surfaces stay waterproof and protected without compromising safety.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Betta TileCare Tile & Grout Sealer with Wheel Applicator is a premium, water-based penetrating sealer that forms an invisible moisture-repellent barrier. Ideal for use in bathrooms, kitchens, laundries, and other wet areas, it helps prevent water damage, stains, and mould growth on porous tiles and grout.
The included wheel applicator makes sealing fast and easy, delivering smooth and precise coverage with minimal mess. Once cured, it dries clear without leaving a slippery or glossy finish, maintaining the natural look of your surfaces.
Surface Preparation
Ensure surfaces are clean, dry, and free of mould, soap scum, and any existing sealers or coatings.
Remove silicone sealants prior to application.
For best results, allow grout and tiles to dry for at least 24 hours before sealing. Heavily porous surfaces may require 3–4 days of drying time.
Application Instructions
Shake well before use.
Starting from the top of the area, apply sealer evenly using the wheel applicator.
Ensure all tile and grout lines are thoroughly coated.
Allow to absorb for 15 minutes.
Reapply a second coat if needed.
Wipe away any excess product from tiles with a clean, dry cloth.
Avoid heavy foot traffic or moisture exposure for at least 24 hours after final coat.
Coverage
Approx. 5–10m² per litre depending on tile and grout porosity.
Drying Time
Touch dry in 15 minutes
Fully cured in 24 hours
Clean-Up
Clean tools and applicator with water immediately after use.
Technical Data
Appearance: Milky white (dries clear)
Base: Water-based penetrating sealer
Finish: Invisible, non-slip
Application method: Wheel applicator
Suitable for: Porous tiles and grout (indoor use)
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Betta Tilecare Tile & Grout Sealer waterproofs porous tiles and grout without leaving a slippery film coating, making it perfect for kitchens, bathrooms, and other tiled areas.
Drying Time:
Recoat: 15 minutes
Full Dry: 24 hours
Coverage:
1L covers 5-10m²
Available Sizes:
1L, 4L, 300g Aerosol, 500ml Wheel Applicator, 750ml Trigger
Application Method & Cleanup:
Tools: Paint brush, roller, or pump spray
Features:
Water-based formula
Clear penetrating finish
Invisible, moisture-repellent coating
Easy to use
Proven technology
Non-slip finish
Preparation:
Remove any silicone sealant strips and soap build-up.
Clean mould off tiles and grout using Betta Tilecare Mould Rid™ or bleach.
Rinse thoroughly with water after cleaning.
Remove and patch all loose or missing tile grout. For improved results, add Bondall HydroCrete to the grout mix.
Ensure the application area is dry for 12-24 hours before applying the sealer.
For porous surfaces or after high-pressure washing, allow 3-4 days drying time before sealing.
Application:
Start from the top of the wall, applying Tile & Grout Sealer liberally over tiles and grout.
Finish by applying the sealer to the shower base or floor. Ensure even coverage across all surfaces.
Drying:
Wait at least 15 minutes for the first application to react before reapplying.
After the second application, wait another 15 minutes, then use a dry cloth to remove any excess from the tile surface.
Allow 24 hours before using the sealed area.
Tips & FAQs:
Not for Water Holding Vessels: This product is not intended for waterproofing items like ponds or fish tanks.
Test Before Use: Always test on a small, inconspicuous area to ensure it provides the desired result.
Avoid Over-application: If the sealer runs or pools, wipe down with a clean, dry, low-lint cloth.
Apply Evenly: Take care to apply evenly, especially on pitted surfaces.
Pre-treat Stains & Mould: Ensure stains, moss, and mould are treated prior to sealing.
Avoid Pooling: Do not allow the product to pool or over-apply on surfaces.
Betta Tilecare Tile & Grout Sealer is a reliable and easy-to-use product for waterproofing and protecting your tiles and grout, providing long-lasting protection without altering the natural appearance of your surfaces.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Betta Tilecare Wet Area Waterproofer is a flexible, fast-drying, liquid rubber membrane designed for waterproofing internal wet areas such as bathrooms, showers, laundries, and tiled spaces. It provides a durable, seamless moisture barrier that resists water pressure and prevents leaks when applied beneath tiles, screeds, or surface coatings.
Surface Preparation:
All surfaces must be clean, dry, and structurally sound. Remove dust, oil, grease, wax, and loose or flaking material. Smooth, glossy surfaces should be roughened or etched. Rough or uneven surfaces should be patched and leveled. Mechanically remove any surface contamination or de-bonded coatings for optimal adhesion.
Priming (if required):
Use a compatible primer on highly porous, glossy, or damp surfaces to promote adhesion. Ensure primed surfaces are dry before applying the membrane.
Application Instructions:
Apply a bond breaker system such as joint tape or fabric to corners, joints, and penetrations.
Apply the first coat using a brush or roller, working it into the surface to avoid pinholes.
Allow the first coat to dry (approx. 1 hour), then apply the second coat in the opposite direction.
Total coverage should be at least 1.5L/m², forming a final dried film thickness of approximately 1.2mm.
Coverage should extend up walls at least 150mm in general areas and 1800mm in shower recesses.
Allow the membrane to cure fully before tiling or overcoating.
Coverage:
Approximately 1.5L per square metre for two coats, depending on surface porosity.
Drying Time:
Tack-free: 45 minutes
Recoat: 1 hour
Ready for tiling: 4 hours
Flood test ready: 16 hours
Dry times may vary based on temperature and humidity.
Clean Up:
Clean tools and equipment with water immediately after use.
Technical Data:
Base: Water-based liquid rubber
Colour: Grey
Finish: Flexible, seamless membrane
Dried Film Thickness: Approx. 1.2mm (after two coats)
Application Temp: 5°C to 35°C
Shelf Life: Refer to packaging for details
Out Of Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
QuikSteel reinforced epoxy putty, 2 ounce
Withstands up to 500 degree Fahrenheit temperatures
Sets in 5 minutes, cures in 1 hour
Hardens like steel, can be drilled, tapped, filed, sanded and painted
Drinking water safe, NSF-61
Out Of Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
QuikSteel reinforced epoxy putty, 2 ounce
Withstands up to 500 degree Fahrenheit temperatures
Sets in 5 minutes, cures in 1 hour
Hardens like steel, can be drilled, tapped, filed, sanded and painted
Drinking water safe, NSF-61
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Swing the Bondall Silicone Remover Push Pull Scrape around corner edges to remove silicone joints. Easily access hard to get to glues with this product that is made out of durable, sharper material than other scrape products so it’s built for any project.
Out Of Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
The Bostik All Purpose Adhesive is ideal for your assembly and repair needs. It has a long-lasting adhesive that is water-resistant so your fixings stay together.
The adhesive works with metals, wood, glass, china, leather, felt, canvas, vinyl, paper, and cardboard.
It has a clear formula so it doesn't hinder the look of the things your are fixing.
It comes in a 20 mL bottle.
The adhesive is water-resistant.
Out Of Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Multipurpose Adhesive
Bostik Blu-Tack® is a permanently plastic reusable material that can used as a removable adhesive or to model with. It has excellent moulding qualities as it resists slump, will not shrink, dry out or harden and can be used over and over again.
Recommended Uses
Ideal for a thousand and one uses including:
Create 3D models
Create fantastic murals on your window or wall
Hold up posters
Cards
Children's paintings
Certificates
Party decorations
Maps
Messages
Hold telephones, mouse mats and calculators in place
Hold ornaments to shelves, photos in albums, screws to screwdrivers
Holds model parts in position for painting or glueing and picture frames straight
Safely store pins, keys, screws and other small objects
Use in floral arrangements to keep flowers in place
Clean fluff from fabric and dirt from computers, model railway tracks or remove dust from hard to get at places
Use as a putty to block out breezes
Materials
Designed to stick to:
Non-porous surfaces
Vinyl
Coated wallpaper
Painted surfaces
Glass
Metal
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Multipurpose Adhesive
Bostik Blu-Tack® is a permanently plastic reusable material that can used as a removable adhesive or to model with. It has excellent moulding qualities as it resists slump, will not shrink, dry out or harden and can be used over and over again.
Recommended Uses
Ideal for a thousand and one uses including:
Create 3D models
Create fantastic murals on your window or wall
Hold up posters
Cards
Children's paintings
Certificates
Party decorations
Maps
Messages
Hold telephones, mouse mats and calculators in place
Hold ornaments to shelves, photos in albums, screws to screwdrivers
Holds model parts in position for painting or glueing and picture frames straight
Safely store pins, keys, screws and other small objects
Use in floral arrangements to keep flowers in place
Clean fluff from fabric and dirt from computers, model railway tracks or remove dust from hard to get at places
Use as a putty to block out breezes
Materials
Designed to stick to:
Non-porous surfaces
Vinyl
Coated wallpaper
Painted surfaces
Glass
Metal
Out Of Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Bostik Contact Bond is a solvent based, high solids, brush or scaper grade contact adhesive. It is specifically formulated to provide an extra-strong and flexible bond on contact.
Where to Use
Residential
Commercial
Substrates
Brush or Scraper
Furniture and allied industries for fixing plastic laminates
Flexible decorative surface coverings
Materials
Neoprene rubbers
Porous and non-porous surfaces
Wood
MDF
Particleboard
Plywood
Leather
Felts
Cottonback
PVC
Metal
Features
n-Hexane formula
Safe quick drying
Heat and water resistant
Good brushability
Excellent adhesion to porous and non-porous surfaces
Provides an extra strong and flexible bond on contact
Uses
Bostik Contact Bond is a solvent based, high solids, brush or scraper grade contact adhesive. It is specifically formulated to provide an extra-strong and flexible bond on contact. It resists heat and water. It also provides excellent adhesion to most natural and neoprene rubbers as well as a wide variety of porous and non-porous surfaces. It may be easily applied by brush or scraper giving a secure and lasting bond making it clean and economical to use.
Bostik Contact Bond is primarily used in the furniture and allied industries for fixing plastic laminates and rigid or flexible decorative surface coverings to wood, MDF, particle board, plywood, leather, felt, cotton back PVC and metal.
PRODUCT CHARACTERISTICS
Colour Pale yellow
Viscosity Medium syrup
Composition Polychloroprene
rubber/resin
Coverage 5 to 6m² per litre
TYPICAL PERFORMANCE DATA (approx.)
Touch dry Tube: 5 to 15 minutes
Can: 20 to 30 minutes
Full cure 45 minutes
Solids content 22%
Specific gravity 0.83
Heat resistance > 150°C
DIRECTIONS FOR USE
Read and understand the Safety Data Sheet before using this product. SDS can be acquired by visiting www.bostik.com.au or by scanning the relevant QR code on the pack.
SURFACE PREPARATION
Ensure all surfaces are clean and dry and free from all loose paint, dust, grease, oil and foreign materials.
APPLICATION
Tube (Blister Pack) Application
1. Unscrew cap and pierce and of the tube with the reverse end of the cap
2. Apply thin, even film to both surfaces to be glued
3. Leave until touch dry (approximately 5 to 15 minutes), then bring both surfaces together accurately
4. Take care to avoid the formation of air bubbles between surfaces
5. To ensure maximum adhesion, clamp or weigh down the entire surface or apply firm hand pressure evenly
6. Replace screw cap to keep the contents of tube airtight
CLEANING
To clean up tools, equipment and adhesive spills use Mineral Turpentine. Use Bostik Handy Wipe towels to remove adhesive from the skin.
STORAGE AND SHELF LIFE
Store in a cool dry place between 5°C and 30°C and out
of direct sunlight. Keep away from sources of ignition.
Shelf life is 12 months from the date of manufacture
when stored as directed.
VOC INFORMATION
606g/litre
Out Of Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Bostik Epoxy Bond is a special two-part adhesive which, when mixed and allowed to set, produces bonds of immense strength. This resin based epoxy sets in approximately 5 minutes to give a permanent and colourless bond. It will adhere to pottery, china, metals, glass, wood, rigid and semi-rigid plastics and cardboard, etc. where an Industrial strength bond is required by handymen, hobbyists and tradesmen.
FEATURES AND BENEFITS
1. Quick setting – will bond in 5 minutes
2. When fully cured, the adhesive can withstand boiling water for short periods of time.
3. Heat resistance rating of 60ºC temperature continuously.
4. Adhesive shear strength of up to 800 psi for metal/metal bonds
APPLICATION
1. Surfaces to be joined must be clean, dry and free from dirt and grease. Metals should be abraded and washed with a petroleum solvent. China and pottery should be washed in detergent, rinsed and dried.
2. Dispense and mix thoroughly, sufficient material of the two parts to carry out the job at hand with a matchstick, screwdriver or similar implement. Reseal the nozzles of the syringe with the enclosed plug and tube with cap and store in an upright position (nozzles upward).
3. Apply a thin film of adhesive to one or both of the surfaces to be joined, press together and do not move until the adhesive has set - usually 5 minutes @ 20ºC. Very good handling strength is obtained after 20 minutes and maximum adhesion is achieved after 24 hours
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Clear Flexible Fabric Glue
A versatile, water-based fabric adhesive designed for clothing repairs, craft projects, and soft furnishings. It forms a strong, long-lasting, flexible bond on most porous fabrics and dries clear in thin films for a neat, professional finish. Once fully cured, the bond is machine washable, can be tumble dried, and is safe to iron.
Key Features
Permanent, flexible bond for clothing and crafts
Water-based, low odour formula
Dries clear in thin applications
Machine washable and tumble-dry compatible after full cure
Heat resistant—safe to iron over the bonded area
Easy squeeze application; cleans up with warm soapy water while wet
Ideal Uses
Hems, trouser turn-ups, and pocket repairs
Attaching cloth labels, badges, and patches
Securing frayed lace ends and trims
Curtain hems and decorative soft furnishing accents
General fabric repairs on cotton, denim, linen, felt, leather and similar porous textiles
Directions
Preparation: Ensure surfaces are clean, dry, and free from dust or grease. At least one surface must be porous.
Test first: Trial on an off-cut or hidden area, especially with light or open-weave fabrics.
Apply: Spread a thin, even layer to the non-visible side or back of the fabric. Join parts and press for several seconds.
Initial handling: Light handling is typically possible after about 1 minute; avoid stressing the bond.
Optional set boost: For improved bonding, gently iron-press ~5 minutes after gluing (use a pressing cloth).
Full cure: Reaches full effective strength after 24 hours. After curing, the item may be machine washed, tumble dried, and ironed.
Clean-Up
While wet: Wipe away with warm, soapy water; repeat if needed, rinse and dry.
When dry on smooth, non-porous surfaces: Gently rub off or use warm, soapy water.
When dry on fabrics: Difficult to remove—prevent excess and work carefully.
Compatibility & Notes
Best on porous textiles: cotton, denim, linen, felt, leather, and similar materials.
Not suitable for non-porous materials or 100% nylon/polyester fabrics.
Avoid heavy application or excessive pressure on light or open-weave fabrics to minimise show-through or darkening.
Specifications
Chemistry
Acrylic copolymer (water-based)
Appearance
Milky white liquid; dries clear in thin films
Density
1.07 ± 0.02 g/cm³
Solids Content
61–63%
Viscosity
Up to ~1,000 cps
pH
4–6
Initial Handling Time
~1 minute (varies with material, temperature, humidity)
Full Cure / Maximum Strength
~24 hours
Washability & Heat
Machine washable; tumble dry and iron once fully cured
Clean-Up (Wet)
Warm soapy water
Pack Size
20 mL (blister)
Storage
Cool, dry place around 20 °C; keep container tightly closed; protect from moisture
Shelf Life
Up to 18 months from manufacturing date (unopened, stored as directed)
Not Suitable For
100% nylon, 100% polyester, non-porous materials, very fine/delicate fabrics (e.g., some silks, wools, linens)
Out Of Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Bostik Fine & Wide Clear Glue is a liquid gum general purpose stationery adhesive that dries clear. It is a clear PVOH (Polyvinyl Alcohol) liquid adhesive with two applicators, a non-drip pen applicator that flows in a fine clean line as well as a spreader.
Recommended Uses
Scrapbooks
Cut and paste activities
School projects
Papercraft
Intricate work
Materials
Designed to stick:
Paper
Cardboard
Fabric
Features
Dual applicator
Pen applicator that flows in a fine clean line
Spreader applicator for covering large areas
YOUR SMART ADVANTAGES
− Dual applicator
- Quality clear PVOH liquid gum adhesive
- Dries clear
- Pen applicator that flows in a fine clean line, ideal for intricate work
- Spreader applicator for covering large areas
- Sits easily in the hand
- Non-toxic safe for all the family
- No mess or waste
- Does not contain food ingredients such as wheat, gluten, flour, egg, nut or milk products
Uses:
Bostik liquid gun general purpose stationery adhesive. Bostik Fine & Wide Clear Glue Pen and a clear PVOH (Polyvinyl Alcohol) liquid gum adhesive with two applicators, a non-drip pen applicator that flows in a fine clean line as well as a spreader.
- Bonds paper, cardboard and fabric
- Ideal for scrap-books cut and paste activities, school projects and paper craft
PRODUCT CHARACTERISTICS
Specification
Complies to Australian Standard 8124.3 as well as European Standard EN71 for Mechanical and Physical properties, flammability of toys and Migration of Certain Elements
Colour Transparent
Physical Form Free flowing adhesive
Appearance White free flowing liquid, slight odour
APPLICATION
1. For the detailed applicator, turn top anti-clockwise. Squeeze gently.
2. Glue will flow smoothly, just as you need it. To reseal, turn top clockwise to prevent leakage.
3. For the spreader simply remove the cap and squeeze gently, spreading adhesive as required.
4. Once finished, wipe away excess glue off the spreader and refit protective cap.
STORAGE AND SHELF LIFE
Store in cool, dry conditions between 5 to 35ºC out of direct sunlight.30°C. Do not freeze
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Overview
This high-quality general-purpose silicone sealant is a versatile solution for a wide range of sealing and bonding applications. Engineered with neutral cure technology, it is designed to provide a durable, flexible, and weather-resistant seal that remains reliable even in demanding environments. Once cured, the sealant forms a strong rubber-like finish that is permanently elastic, ensuring long-lasting performance both indoors and outdoors.
Key Features
Neutral Cure Technology: Low-odor curing system suitable for sensitive applications.
Permanently Flexible: Retains elasticity over time without cracking or shrinking.
Waterproof Protection: Provides a watertight seal, protecting against leaks and moisture ingress.
Interior & Exterior Use: Unaffected by rain, snow, extreme temperatures, or prolonged UV exposure.
Excellent Adhesion: Bonds strongly to most common building materials without primer.
Easy Application: Smooth flow from the tube, easy to tool and clean before curing.
Applications
This sealant is designed for general-purpose use across a variety of materials and environments. Its flexibility and adhesion make it suitable for:
Sealing around window and door frames.
Lap joints in metal guttering and roofing sheets.
Bonding panels such as wood, plasterboard, insulation board, and drywall.
Fixing masonry joints including sills, brickwork, and decorative trims.
Gap filling around pipes, conduits, and penetration surfaces.
General sealing in kitchens, bathrooms, and living areas where flexibility is required.
Limitations
Not suitable for permanent water immersion (e.g., underwater joints or continuous water load).
Not recommended for use on polyethylene (PE), polypropylene (PP), polycarbonate (PC), polymethyl methacrylate (PMMA), PTFE, neoprene, bituminous surfaces, or very soft plastics.
Not intended for deep cavity filling without adequate moisture for curing.
Surface Preparation
To ensure maximum performance, surfaces must be clean, dry, and free from dust, grease, or loose particles. Non-porous surfaces should be wiped with solvent and dried with a clean cloth. Porous surfaces should be lightly abraded or brushed to remove contaminants and improve adhesion. Complete any painting work before applying the sealant.
Application Instructions
Remove the cap and pierce the nozzle seal.
Apply steadily along the joint or surface, ensuring continuous contact.
Smooth or tool the bead before skin formation occurs.
If masking tape is used, remove immediately after tooling to avoid tearing the cured seal.
Curing
At room temperature (23°C), the sealant will skin over within 15 minutes and achieve full cure within 24 hours, depending on humidity and joint depth. Once cured, it provides a permanently flexible and weatherproof joint.
Cleaning & Maintenance
Excess uncured sealant can be cleaned using a cloth dampened with mineral turpentine. Fully cured material should be trimmed away carefully with a sharp blade. Store unused tubes in a cool, dry place below 25°C and away from direct sunlight. Shelf life is up to 12 months from the date of manufacture.
Health & Safety
Use in a well-ventilated area. Avoid contact with eyes and mucous membranes, as uncured sealant may cause irritation. In case of contact with eyes, flush thoroughly with water and seek medical advice. Keep out of reach of children. Always follow safety instructions and refer to the product’s safety data for detailed guidance.
Why Choose This General Purpose Silicone Sealant?
This sealant is a trusted choice for tradespeople, DIY enthusiasts, and homeowners seeking a reliable solution for everyday sealing needs. Its combination of flexibility, adhesion, and weather resistance ensures that once applied, it continues to protect and bond effectively for years to come. Whether you are fixing a leaking gutter, sealing around windows, or bonding decorative trims, this product provides professional results with minimal effort.
Technical Specifications
Technology
Neutral Cure Silicone
Appearance
Clear Paste
Working Time
Up to 15 minutes
Tack-Free Time
Approximately 15 minutes
Full Cure at 23°C
24 hours
Flexibility
Permanently elastic after curing
Weather Resistance
Unaffected by rain, snow, UV, and temperature variations
Applications
Windows, doors, guttering, masonry, panels, pipes, decorative elements
Storage
Below 25°C, out of direct sunlight
Shelf Life
12 months from manufacturing date
Out Of Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
These non-yellowing dots are easy to use, acid and lignin free, making them ideal for use in the home, office and school as an alternative to drawing pins, staples or tape. They are solvent-free and non-toxic. Bostik Glu Dots are also available in an extra strength version, for permanent applications.
Ket Features:
-Repositionable
-Transparent, non-visible
-Solvent-free and non-toxic
-Acid and lingin free, suitable for photographs
Description
Bostik Extra Strength Glu Dots are little circles of double-sided, clear adhesive which exhibit high tack, offering secure bonds to almost anything including paper, wood, plastic, metal, glass and painted surfaces. These non-yellowing dots are designed to provide a permanent hold and the bond strength will increase over time. They are easy to use, acid and lignin free, making them ideal for use in the home, office and school as an alternative to drawing pins, staples or tape. They are solvent free and non-toxic. Bostik Glu Dots are also available in a REMOVABLE version, for non-permanent applications.
Applications
- Holding up posters, cards, certificates, notices, maps, menus, calendars, messages, timetables, learning aids, children paintings, decorations, etc.
- Keeping in place telephones, mouse pads, pens, candles, figurines, vases, calculators, ornaments, etc.
- Keeping picture frames straight.
- Sticking photos in an album.
- Ideal for school projects, scrapbooking, art and craft projects.
Adhesion
Bostik Extra Strength Glu Dots Stick extremely well to non-porous surfaces such as metal, glass, plastics, vinyl coated and painted surfaces and porous surfaces such as paper, boards, cloth, and wood.
Limitations
- Not suitable for highly absorbent, damp or dusty surfaces.
- Not suitable for holding up heavy objects.
- May damage delicate papers on removal.
Safety Instructions
Bostik Extra Strength Glu Dots is non-toxic. The product poses a choking hazard if ingested. In the event of ingestion, the mouth should be washed with water. Seek medical assistance if irritation or discomfort persists. Refer to our Safety Data Sheet for further toxicological information and comprehensive handling instructions.
Surface Preparation
Ensure that surfaces are clean, dry and free of any dust, grease and loose materials.
How to use
1. Tear along the perforations.
2. Peel off the paper backing.
3. Press the dot firmly onto the first surface.
4. Remove the clear film.
5. Press the second surface firmly onto the dot.
Out Of Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
These non-yellowing dots are easy to use, acid and lignin free, making them ideal for use in the home, office and school as an alternative to drawing pins, staples or tape. They are solvent-free and non-toxic. Bostik Glu Dots are also available in an extra strength version, for permanent applications.
Key Features
Repositionable
Transparent, non-visible
Solvent-free and non-toxic
Acid and lingin free, suitable for photographs
Description
Bostik Removable Glu Dots are little circles of double-sided, clear adhesive which stick almost anything including paper, wood, plastic, metal, glass and painted surfaces. These non-yellowing dots are easy to use, acid and lignin free, making them ideal for use in the home, office and school as an alternative to drawing pins, staples or tape. They are solvent free and non-toxic. Bostik Glu Dots are also available in an EXTRA STRENGTH version, for permanent applications.
APPLICATIONS
- Holding up posters, cards, certificates, notices, maps, menus, calendars,
messages, timetables, learning aids, children paintings, decorations, etc.
- Keeping in place telephones, mouse pads, pens, candles, figurines, vases, calculators, ornaments, etc.
- Keeping picture frames straight.
- Sticking photos in an album.
- Ideal for school projects, scrapbooking, art and craft projects.
ADHESION
Bostik Removable Glu Dots sticks extremely well to non-porous surfaces such as metal, glass, plastics, vinyl coated and painted surfaces and porous surfaces such as paper, boards, cloth, and wood.
LIMITATIONS
- Not suitable for highly absorbent, damp or dusty surfaces.
- Not suitable for holding up heavy objects.
- May damage delicate papers on removal.
Safety Instructions:
Bostik Removable Glu Dots is non-toxic. The product poses a choking hazard if ingested. In the event of ingestion, the mouth should be washed with water. Seek medical assistance if irritation or discomfort persists.
Refer to our Safety Data Sheet for further toxicological information and comprehensive handling instructions.
Surface Preparation:
Ensure that surfaces are clean, dry and free of any dust, grease and loose materials.
How to Use:
1. Tear along the perforations.
2. Peel off the paper backing.
3. Press the dot firmly onto the first surface.
4. Remove the clear film.
5. Press the second surface firmly onto the dot.
6. Reposition if necessary
Cleaning
Remove dots carefully by rubbing and rolling them off. Use mineral turpentine to remove any remaining residue.
Storage
The shelf life of the product is indefinite if stored at room temperature.
Packaging
64 Glu Dots in a wallet
Out Of Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
DESCRIPTION
Bostik Hard Plastics Adhesive is a solvent-borne adhesive based on SBS polyurethane. It has the advantages of easy application, by comb or brush and immediate strength on contact.
YOUR SMART ADVANTAGES
- Clear and water-resistant
- Easy to apply
- Immediate strength on contact
- For tough repairs
USES
Bostik Hard Plastics Adhesive is suitable for bonding the following plastics to themselves and each other: PVC-U, ABS, High Impact Polystyrene. It has wide range of uses for repairing household objects. Bostik Hard Plastics adhesive is also useful for sticking most clear plastics, wood, metal and leather.
PRODUCT CHARACTERISTICS
Colour Transparent
Form Mobile liquid
Specific Gravity 0.92 approx.
Composition Synthetic resin
Viscosity Low
Solids Content 27% approx.
Odor Ketonic
PREPARATION
1. Make sure all surfaces to be bonded are clean and dry, free from dust, dirt and grease.
APPLICATION
2. Remove tube cap and spread the adhesive evenly over both surfaces.
3. Leave the coated surfaces until the adhesive is just tacky, approximately 4 minutes at normal room temperature.
4. Ensure the surfaces are accurately aligned and then press firmly together. They will stick immediately.
CLEANING
5. After use, wipe the nozzle with a clean dry cloth (avoiding skin contact).
7. Bostik Hard Plastics adhesive can be removed using acetone before set. Solvents can damage some surfaces, therefore carry out a test on a small area first.
PRECAUTIONS IN USE
Bostik Hard Plastics adhesive is not suitable for polyolefins e.g. polythene, polypropylene or PTFE. It should not be used for repairing items that hold hot liquids.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Bostik Hot Melt Sticks are made of a general purpose translucent flexible hot melt in a stick form for use with the Bostik Hot Melt Glue Gun. It provides an instant, fast, clean and versatile bond between a myriad of household and craft materials and suitable for many porous materials.
Recommended Uses
Ideal for:
Craft projects
Home décor projects
Minor household repairs
DIY projects
Materials
Designed to stick to:
Most craft and household materials
Fabric
Wood
Leather
Most plastics
Polystyrene
Ceramics
Features
Once heated and gunned out, it provides instant adhesion
Adhesive is clear and flexible when dry
Fast, clean and versatile
Out Of Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Non-toxic PVA glue that is non-staining and dries clear. Ideal for models, masks and other craftwork. Non-staining and specially developed to easily wash off clothes, hands and upholstery, even when dry! Made in Australia
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Bostik HG3 Hot Melt Glue Gun is an electric hot melt gun that uses Bostik HG3 Hot Melt Glue Sticks to provide an instant, fast, clean and versatile adhesion to a myriad of household and craft materials. It is rated 110-240 volts, 50/60Hz, 55 watts with a working temperature of 193°C.
Recommended Uses
Ideal for:
Craft projects
Home décor projects
Minor household repairs
DIY projects
Most craft and household materials
Fabric
Wood
Leather
Most plastics
Polystyrene
Ceramics
Key Features:
Easy to use trigger action
Designed to fit neatly in the hand
Designed for use with Bostik HG3 Glue Sticks
Uses:
Bostik HG3 Glue Gun, using Bostik HG3 Glue glue sticks provide an instant fast, clean and versatile adhesion to a myriad of household and craft materials.
- Bostik HG3 Glue Gun is designed for DIY Tasks and household repairs, hobby, craft-work, and home décor projects. Instantly bonds most craft and household materials including, fabric, wood, leather, most plastics, ceramics and metal
Application:
1. Clip metal stand on the glue gun. Always use the stand. Never lie gun down on the side when in use or whilst cooling down this will cause gun failure.
2. Insert Bostik HG3 glue stick gently through the tunnel at the back of the gun. Never use excessive force as the glue stick will clog the channel.
3. Plug the cord into an electrical outlet and wait 5 minutes to heat up the glue. Ensure glue is hot or glue will not extrude through the gun.
4. Apply adhesive by gentle continuous pressure and to the more difficult surface to bond (usually smooth surfaces are more difficult to adhere than rough, porous surfaces).
5. Release trigger to stop the flow of glue.
6. Glue does not need to be spread. Do not touch
7. Molten adhesive, as temperatures around 200°C will cause serious burns.
8. Join surfaces as quickly as possible for optimum bond strength.
9. To bond foam products (polystyrene foam etc) to another surface, apply adhesive in an “S” pattern to the surface to which the foam will be bonded, rather than directly to the foam.
10. To bond fabrics, use a smaller “S” pattern for additional strength.
11. Small drops of glue can be easily removed when cold.
12. Residual glue can be remelted and removed from most bonded surfaces with a warm knife.
13. When you have finished using the gun, switch off and unplug it.
14. Allow the glue stick to remain in the gun – do not remove the stick from the rear of the gun at any time
Out Of Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Bostik Multi Bond is a general purpose solvent based Nitrile Rubber Adhesive. It is nearly clear in colour and will give excellent bonds that are both chemical and temperature resistant. It is packaged in a convenient aluminium tube for ease of use.
Where to Use
Residential
Commercial
Industrial
Substrates
Toys
Leather Goods
Furniture
Upholstery
Jewellery
Materials
Leather
Metals
Wood
Canvas
PVC
Plastics
Features
Quick bonding
Easy to use
Chemical and temperature resistant
It has many household and industrial uses and is particularly suitable for bonding leather, metals, wood, canvas PVC and other plastics. It is widely used in the repair of toys, leather goods, furniture, upholstery, jewellery and in the handicraft making areas.
This is an excellent product where quick bonding and a clear bond line is required especially in the DIY market.
Instructions
Surface Preparation
Surfaces to be bonded must be dry, clean and free of grease. If surfaces are non-porous, smooth and glossy, roughen with glass paper (preferably) or apply solvent suck as Acetone
As a two way dry stick:
Apply an even film onto both substrates, leave 5-10 minutes then join together with as much as possible taking care not to trap any air.
As a one way wet stick:
Usually, this technique is employed when either one or both of substrates to be bonded are porous (e.g. fabrics, cardboard).
Clean Up
Any wet or partially wet adhesive can be removed with scraping and Bostik Solvent 9901. The dried adhesive is best removed with a scraper or by sanding.
STORAGE AND SHELF LIFE
A minimum of 12 months in original sealed packaging if stored under cover away from heat.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Bostik Nail It Fast Cure White: The Acrylic Adhesive for Rapid, Strong & Odorless Bonds
Product Overview
Bostik Nail It Fast Cure is a fast-curing, versatile acrylic adhesive that offers strong and durable bonds. It's easy to apply and almost odorless.
Key Benefits
Solvent-free formula
Suitable for EPS and XPS
Non-corrosive towards metal
Easy to apply and clean
Applications
Specifically developed for bonding:
Wood, chipboard, hardboard
uPVC to brickwork, stone or concrete
Ceramic tiles to porous substrates
Limitations
Not suitable for PE, PP, PC, PMMA, PTFE, soft plastics, neoprene, and bituminous substrates. Not designed for continuous exposure to water or for movement joints.
Application Instructions
Apply the adhesive in a ventilating manner, using vertical stripes or dots. Material should be placed by shoving and pushing firmly.
Surface Preparation
All substrates must be solid, clean, dry, and free from grease and dust. For porous substrates, priming may be required.
Cleaning & Maintenance
Tools and uncured material can be cleaned with water or Methylated Spirit. Cured material must be removed mechanically. Bostik HANDY WIPES are recommended for cleaning hands.
Colour Options
Available in white.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Bostik Nail It Instant Grab White: Grab It Fast, Hold It Forever
Product Overview
Bostik Nail It Instant Grab White is a high-quality professional adhesive crafted with MSP (Modified-Silyl Polymer) technology. It offers extremely high initial tack, eliminating the need for fixation or support during curing.
Smart Advantages
Extremely high initial tack
No fixation or support needed during curing
Free of isocyanates, phthalates, solvents, and silicones
Suitable for both interior and exterior use
Non-corrosive towards metals
Almost odorless
Resistant to moisture, weather, and UV
Applications
Universal bonding adhesive suitable for:
Stone, Concrete, Glass
Metals, Alloys, Stainless steel
Plastics, Polyurethane, PVC
Wood, Paint Systems
Directions for Use
Application should be done in vertical stripes using a caulking gun. No need for fixation or support due to high initial strength.
Limitations
Not suitable for certain plastics, continuous water exposure, or movement joints.
Cleaning & Safety
Remove excess uncured adhesive with Bostik Handy Wipe or a damp cloth. Cured adhesive can only be mechanically removed.
Product Codes & Specifications
Available in 290ml cartridges. Temperature resistance ranges from -40°C to +90°C.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Bostik Seal it Kitchen & Bathroom Light Grey: The All-In-One Solution for Wet Areas
Product Overview
A premium oxime-curing silicone sealant specifically formulated to resist mildew and mold in hot, humid environments.
Key Features
Neutral cure for versatile application
Excellent for UV exposure and porous surfaces
Resistant to mold and mildew
±25% joint movement capabilities
WaterMark approved for quality assurance
Low odour and UV resistant
Safe on various materials including galvanized steel and concrete
Where to Use
This product is ideal for sealing in:
Kitchens, bathrooms, toilets, and showers
Basins and vanity units
Glass partitions
Ceramic tiles
Vitreous enamel
Most laminated surfaces
Fibre glass
Rimless sinks
Instructions
Apply on clean, dry surfaces for optimal results. Follow safety guidelines as stated on the product label.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Bostik Seal it Kitchen & Bathroom Translucent: The All-In-One Solution for Wet Areas
Product Overview
A premium oxime-curing silicone sealant specifically formulated to resist mildew and mold in hot, humid environments.
Key Features
Neutral cure for versatile application
Excellent for UV exposure and porous surfaces
Resistant to mold and mildew
±25% joint movement capabilities
WaterMark approved for quality assurance
Low odour and UV resistant
Safe on various materials including galvanized steel and concrete
Where to Use
This product is ideal for sealing in:
Kitchens, bathrooms, toilets, and showers
Basins and vanity units
Glass partitions
Ceramic tiles
Vitreous enamel
Most laminated surfaces
Fibre glass
Rimless sinks
Instructions
Apply on clean, dry surfaces for optimal results. Follow safety guidelines as stated on the product label.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Bostik Seal it Kitchen & Bathroom White: The All-In-One Solution for Wet Areas
Product Overview
A premium oxime-curing silicone sealant specifically formulated to resist mildew and mold in hot, humid environments.
Key Features
Neutral cure for versatile application
Excellent for UV exposure and porous surfaces
Resistant to mold and mildew
±25% joint movement capabilities
WaterMark approved for quality assurance
Low odour and UV resistant
Safe on various materials including galvanized steel and concrete
Where to Use
This product is ideal for sealing in:
Kitchens, bathrooms, toilets, and showers
Basins and vanity units
Glass partitions
Ceramic tiles
Vitreous enamel
Most laminated surfaces
Fibre glass
Rimless sinks
Instructions
Apply on clean, dry surfaces for optimal results. Follow safety guidelines as stated on the product label.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Noise, vibration, and impact dampening properties are exceptional.
Adhesion and sealing qualities are excellent.
Tack-free time and cure speed are both quick.
It's safe to use in both salt and fresh water.
Designed in Australia
Seal N Flex Auto & Marine FC is a high-performance, fast-curing polyurethane adhesive and sealant from Bostik.
Bostik Seal N Flex Auto & Marine FC has remarkable adhesion properties and is appropriate for a wide range of internal and external industrial and automotive adhesion applications.
It's paintable, slump-resistant, and water-resistant, as well as resistant to fungal assault.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Noise, vibration, and impact dampening properties are exceptional.
Adhesion and sealing qualities are excellent.
Tack-free time and cure speed are both quick.
It's safe to use in both salt and fresh water.
Designed in Australia
Seal N Flex Auto & Marine FC is a high-performance, fast-curing polyurethane adhesive and sealant from Bostik.
Bostik Seal N Flex Auto & Marine FC has remarkable adhesion properties and is appropriate for a wide range of internal and external industrial and automotive adhesion applications.
It's paintable, slump-resistant, and water-resistant, as well as resistant to fungal assault.
Out Of Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Bostik Soft Plastics Adhesive is a strong water-resistant polyurethane-based adhesive, designed for long-lasting repairs of objects made from common soft and flexible plastics. It is quick-drying leaving a clear and almost invisible glue line. Ideal for repair of inflatable swimming pool toys.
APPLICATIONS
Repair of inflatable toys, plastic raincoats, lilos and vinyl swimming pools. Also suitable as a general-purpose glue for DIY repairs around the house and for arts and craft.
ADHESION
Adheres to rigid and soft (plasticized) PVC, ABS, Perspex, Polystyrene (solid), Formica polyurethane, and fibreglass. Also bonds a variety of other materials such as metal, glass, porcelain, ceramic, leather, most rubbers, felt, cork, fabric, cardboard, paper, coated and uncoated wood.
LIMITATIONS
- Not suitable on plastics such as polypropylene, polyethylene.
- Not suitable on expanded polystyrene, rayon and acetate fabrics, EPDM and silicone rubber.
SURFACE PREPARATION
Surfaces must be clean, dry and free from all loose materials, dust, dirt, oil, rust and any other contaminants. For improved adhesion, surfaces should be lightly abraded and then wiped with a solvent such as acetone. Poor surface preparation may result in a weak bond and delamination of the substrates along the glue line.
HOW TO USE
1. Ensure that surfaces are prepared as above.
Wet stick method:
2. Spread an even film of adhesive onto both surfaces. If required, use the PVC patch provided.
3. Leave the surfaces open for approximately 5 minutes, until almost dry.
4. Bring surfaces together firmly until bonded. If necessary, hold together with a clamp or tape.
5. Full strength develops after 24 hours.
Dry stick method:
6. This application method achieves the strongest and fastest bond. It is ideal for heavy-duty repairs or when initial high bond strength is required.
7. Spread an even film of adhesive onto both surfaces. Allow drying completely.
8. Re-activate the glue by applying a suitable heat source over the surfaces, e.g. a hairdryer.
9. Once the surfaces are very hot, bring together and press firmly to ensure good contact for about 2 minutes.
10. Depending on the application, the object may be handled immediately.
11. Full strength develops after 24 hours.
CLEANING
- Wet adhesive can be cleaned with acetone.
- Dried adhesive can be removed mechanically or with acetone. If using acetone, check for substrate compatibility prior to use.
PRODUCT CHARACTERISTICS
Type Polyurethane
Appearance Clear viscous liquid
Density (g/cm³) Approximately 0.9
Odour Mildly pungent odour
Solids (%) Approximately 15
Viscosity (cps) Approximately 3500
TYPICAL PERFORMANCE DATA
Initial setting time 10 minutes to 2 hours (depending on porosity of substrate)
Final setting time 24 hours
Temperature resistance Approximately -20 to 80°C
Water resistance Excellent
Out Of Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Bostik Super Glue is a multipurpose glue that bonds most non-porous materials in seconds. It dries to a clear, permanent bond with exceptional tensile strength up to 210 kg per square cm.
Recommended Uses:
-Precision work
-DIY projects
-Home handyman projects
-Electrical
-Optical
-Watch
-Jewellery
-Car accessories
-Materials
Designed to stick:
-Metal
-Ceramic
-Wood
-Most plastics - (not polyethylene or polypropylene)
-Natural and synthetic rubber
-Leather
Features:
-Dries clear
-Exceptional tensile strength up to 210kg per square cm
-Enables precision work due to its small size
Out Of Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Fast, strong and resistant super glue gel
Product overview
Bostik Fix & Glue Gel is the latest technology available in the market, which sticks in a few seconds and provides a strong, long-lasting bond. Its gel consistency makes it suitable for vertical surfaces. It is easy to use through its precise nozzle, in which the product will remain liquid for up to 12 months. Most importantly, Fix & Glue Gel is solvent-free and odourless – making it a safer option.
Product Details
Flexible and durable bond resists knocks and drops
Water & temperature resistant
Solvent-free
Non-irritant, and odourless
No respiratory allergens
Recommended Uses
Bostik Fix & Glue Gel is a great repair solution, in particular for vertical surfaces. Bonds almost all materials, including:
Porcelain
Ceramic
Glass
Mirror
Leather
Wood
Paper
Metal
Fabric
Hard plastic
Tiles
Concrete
Brick
Stone
Out Of Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Fast, strong and resistant super glue gel
Product overview
Bostik Fix & Glue Gel is the latest technology available in the market, which sticks in a few seconds and provides a strong, long-lasting bond. Its gel consistency makes it suitable for vertical surfaces. It is easy to use through its precise nozzle, in which the product will remain liquid for up to 12 months. Most importantly, Fix & Glue Gel is solvent-free and odourless – making it a safer option.
Product Details
Flexible and durable bond resists knocks and drops
Water & temperature resistant
Solvent-free
Non-irritant, and odourless
No respiratory allergens
Recommended Uses
Bostik Fix & Glue Gel is a great repair solution, in particular for vertical surfaces. Bonds almost all materials, including:
Porcelain
Ceramic
Glass
Mirror
Leather
Wood
Paper
Metal
Fabric
Hard plastic
Tiles
Concrete
Brick
Stone
Out Of Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Bostik Super Glue is a multipurpose glue that bonds most non-porous materials in seconds. It dries to a clear, permanent bond with exceptional tensile strength up to 210 kg per square cm.
Recommended Uses:
-Precision work
-DIY projects
-Home handyman projects
-Electrical
-Optical
-Watch
-Jewellery
-Car accessories
-Materials
Designed to stick:
-Metal
-Ceramic
-Wood
-Most plastics - (not polyethylene or polypropylene)
-Natural and synthetic rubber
-Leather
Features:
-Dries clear
-Exceptional tensile strength up to 210kg per square cm
-Enables precision work due to its small size
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Bostik Ultra-Strong Clear Super Glue (Liquid, Odourless, Fast-Setting)
Ultra-Strong Clear Super Glue is a professional-grade, medium-viscosity liquid adhesive designed for quick, reliable repairs on most non-porous materials. It forms an instant high-strength bond that sets in seconds and reaches full cure in 24 hours. The clear, solvent-free formulation is virtually odourless for a cleaner, more comfortable user experience, and its slightly flexible bond helps resist knocks and everyday drops once cured.
Why You’ll Love It
Fast setting: bonds in seconds to get you back to work quickly.
Ultra strong: high strength once fully cured for durable, long-lasting repairs.
Water & heat resistant: engineered to stand up to common household moisture and temperature swings.
Odourless & solvent-free: cleaner application with a safer, low-irritation formula.
Slightly flexible bond: helps absorb minor shocks and everyday handling.
Ideal Materials
Best results on clean, dry, non-porous surfaces including:
China, ceramics and porcelain (non-permanent on items subject to frequent washing)
Rubber and elastomers
Metals and metal components
Jewellery repair (non-food contact)
Many rigid plastics*
*Not suitable for polyethylene (PE), polypropylene (PP) or PTFE (Teflon®). Not recommended for permanently bonding glass, high-alkaline materials, or items that are regularly washed. Avoid paper and other highly porous substrates.
Where It Excels
Quick household fixes (knobs, clips, figurines, trim)
Hobby & craft assembly (non-porous parts)
Workshop touch-ups and small component repair
Office and general repair kits
How It Works
This liquid cyanoacrylate reacts with trace moisture on surfaces to polymerise rapidly, forming a high-strength thermoplastic bond. The medium viscosity helps wet out tight-fitting parts while minimising run-off when applied sparingly.
Before You Start
Surface prep: Ensure both surfaces are clean, dry, and free from dust, oil, rust, release agents or old adhesive. Lightly abrade glossy plastics/metal where appropriate and wipe clean.
Dry fit first: Check alignment, clamping and support so parts come together quickly and accurately.
Protect work area: Use disposable backing and keep caps, tissues and a small amount of acetone or nail-polish remover handy for cleanup.
Application (Liquid)
Open: For first use, attach/screw the nozzle and remove the cap.
Apply a tiny amount: Place a small drop on one surface only. More glue can slow cure and weaken the joint.
Assemble: Bring parts together immediately and hold with firm, even pressure for ~20 seconds. Avoid movement during initial set.
Let it cure: Handling strength develops quickly; allow 24 hours for full cure and maximum performance.
Clean-Up & Rework
Fresh squeeze-out: Wipe carefully. Small residues may be treated with acetone/nail-polish remover and gently scraped once softened.
On skin: Do not pull apart. Soak in warm, soapy water and gently roll/peel. Use a blunt tool (e.g., spoon handle) to separate bonded skin slowly.
Pro Tips for Best Results
Use the smallest effective drop—thin bondlines are stronger.
Maintain close-fitting joints; gaps reduce cure speed and strength.
Avoid bonding on PE, PP, PTFE and materials with heavy plasticisers or strong alkalinity.
Allow the full 24-hour cure before exposing to stress, moisture or heat.
Storage & Shelf Life
Store tightly closed in a cool, dry place below 25 °C, away from direct sunlight.
Typical shelf life: 12 months from manufacture when stored as directed.
Safety
Cyanoacrylate adhesive: bonds skin and eyes in seconds. Keep out of reach of children.
Wear protective gloves and eye protection.
In eyes: rinse immediately with water and seek medical attention.
Specifications
Technology
Modified Ethyl Cyanoacrylate (liquid, medium viscosity)
Appearance / Colour
Clear
Typical Working / Set Time
Up to ~20 seconds (conditions and substrates affect speed)
Full Cure
24 hours
Water & Heat Resistance
Resistant after full cure (not for continual immersion or high-temperature structural loads)
Odour / Solvents
Virtually odourless; solvent-free formulation
Bond Character
Slightly flexible; resists minor knocks and drops when fully cured
Suitable Substrates
China, ceramics, rubber, metal, jewellery, many rigid plastics (non-porous, clean, dry)
Not Recommended
PE, PP, PTFE; permanent glass bonds; high-alkaline materials; frequently washed items; paper/very porous substrates
Cleanup (Uncured)
Acetone or nail-polish remover; scrape gently once softened
Storage
Cool, dry, below 25 °C; protect from sunlight
Shelf Life
12 months from manufacture (stored as directed)
FAQs
Can I use it on flexible rubbers? Yes, many rubbers bond well; ensure surfaces are clean and oil-free.
Is it dishwasher-safe? Not recommended for items that are regularly washed, soaked or immersed.
Why shouldn’t I flood the joint? Excess adhesive slows cure and weakens the bond—thin layers perform best.
Disposal
Allow small residues to cure fully (exposed to air) before disposal in accordance with local regulations.
![Bostik Seal N Flex Auto & Marine FC Adhesive & Sealant [Black]](//gluesaustralia.com.au/cdn/shop/files/9310492265025_0316718a-8147-4bdd-955a-19d6d8a0bc59.png?v=1754712705&width=645)
![Bostik Seal N Flex Auto & Marine FC Adhesive & Sealant [White]](//gluesaustralia.com.au/cdn/shop/files/9310492265001_6fb5fccc-7784-41bb-9997-bbd917e3c834.png?v=1754712704&width=645)
![Bostik Seal N Flex Auto & Marine FC Adhesive & Sealant [Black]](http://gluesaustralia.com.au/cdn/shop/files/9310492265025_0316718a-8147-4bdd-955a-19d6d8a0bc59.png?v=1754712705&width=645)
![Bostik Seal N Flex Auto & Marine FC Adhesive & Sealant [White]](http://gluesaustralia.com.au/cdn/shop/files/9310492265001_6fb5fccc-7784-41bb-9997-bbd917e3c834.png?v=1754712704&width=645)
