In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Overview: Selleys White For Life Wet Area Waterproof Silicone Sealant is a premium, 100% silicone sealant designed to provide a long-lasting, waterproof, and mould-resistant seal in high-moisture areas such as bathrooms, kitchens, and laundries. Its advanced formulation ensures the sealant remains brilliant white over time, resisting yellowing, staining, and blackening.
Surface Preparation: Ensure all surfaces are clean, dry, and free from dirt, dust, oil, and loose materials. Clean the area with mineral turpentine and wipe dry with a clean cloth before application.
Application Instructions:
Cut the nozzle at a 45° angle to the desired bead size.
Cut the cartridge tip and fit the nozzle.
Place the cartridge into a caulking gun and apply steady pressure to ensure the sealant is pushed into the joint.
Tool the sealant with a spatula dipped in detergent water within 5-10 minutes of application for a smooth finish.
Clean up any excess sealant with mineral turpentine before it skins.
Allow the sealant to cure fully, which typically takes 72 hours.
Coverage: The coverage depends on the joint size; for example, a 5mm x 5mm joint will yield approximately 12 linear meters per 300g cartridge.
Drying Time: The sealant skins in about 10 minutes and cures fully in 72 hours.
Clean-Up: Uncured sealant can be removed with mineral turpentine. Once cured, the sealant is extremely difficult to remove and must be abraded or trimmed with a knife.
Technical Data:
Technology: Acetic cure silicone
Colour: White
Density: 1.05 g/cm³
Shore A Hardness: Approximately 20
Tensile Strength: 1.5 MPa
Elongation at Break: 400%
Service Temperature Range: -60°C to +150°C
Sold Out
Express Post: 1-3 Days | Standard Post: 2-5 Days
Photo dots are fantastic for fixing pictures and certificates. It replaces photo corners, messy liquid glues and sprays, making it an easier option to use for mounting photographs and pictures, holding certificates and photos in place for framing and scrapbooking.
Photo Dots pack contains clear, flat double-sided, strong adhesive dots.
Each adhesive dot is acid-free, lignin free and non-toxic, to ensure photos do not discolour or damage over time.
Photo Dots are thinner than Sticky Dots, giving them a seamless look without protruding behind the photo.
Each pack contains 64 dots.
Sold Out
Express Post: 1-3 Days | Standard Post: 2-5 Days
Sticky Dots Permanent is a clear, double-sided, strong, permanent, adhesive glue dot. Sticky Dots Permanent are fantastic for when a stronger fix is required.
It replaces messy liquid glues, staples, tacks, drawing pins and paperclips, making it an easier option to use for arts and craft, scrapbooking, memos, noticeboards, presentations, card marking, albums, gift wrapping and school projects.
Each adhesive dot is acid-free, lignin-free and non-toxic.
Each dot measures approximately 10mm in diameter
Sold Out
Express Post: 1-3 Days | Standard Post: 2-5 Days
Sticky Dots Removable is a clear, double-sided, strong, adhesive glue dot. It is easily removable, leaving no residues behind. Simply roll the dots off with your fingertips to remove.
It replaces messy liquid glues, staples, tacks, drawing pins and paperclips, making it an easier option to use for arts and craft, scrapbooking, memos, noticeboards, presentations, card marking, albums, gift wrapping and school projects.
Each adhesive dot is acid-free, lignin free and non-toxic.
Each dot measures approximately 10mm in diameter
Sold Out
Express Post: 1-3 Days | Standard Post: 2-5 Days
Sika MaxTack® is a one part high strength, copolymer dispersion adhesive.
Uses Sika MaxTack® is a multipurpose high strength, high initial grab adhesive for bonding building materials indoor and in sheltered outdoor areas.
- Sika MaxTack® has strong adhesion on various porous materials such as concrete, mortar, fiber cement, wood and painted substrates or decorative pieces.
- Sika MaxTack® is suitable to bond decorative parts as skirting board, wood frame, panel, terra cotta tile, anodised aluminium, hard PVC profiles, polystyrene moulding and panel, polystyrene ceiling tile, wood stick and moulding.
For other substrates and specific paints: carry out pre-trials.
Characteristics:
Advantages
- Good workability
- Powerful grab properties (green strength)
- Odourless
- Nail-free fixing
- For interior use on wall and ceiling
- For sheltered outdoor use on wall (canopy, balcony)
- Over paintable by an emulsion waterborne paint
- Bonds to a wide range of substrates
Colour Off white
Shelf Life:
18 months from the date of production if stored in undamaged original sealed containers, in dry conditions and protected from direct sunlight at temperatures between +10°C and +25°C.
Sika MaxTack® must be protected from frost.
Sold Out
Express Post: 1-3 Days | Standard Post: 2-5 Days
Sika MaxTack® is a one part high strength, copolymer dispersion adhesive.
Uses Sika MaxTack® is a multipurpose high strength, high initial grab adhesive for bonding building materials indoor and in sheltered outdoor areas.
- Sika MaxTack® has strong adhesion on various porous materials such as concrete, mortar, fiber cement, wood and painted substrates or decorative pieces.
- Sika MaxTack® is suitable to bond decorative parts as skirting board, wood frame, panel, terra cotta tile, anodised aluminium, hard PVC profiles, polystyrene moulding and panel, polystyrene ceiling tile, wood stick and moulding.
For other substrates and specific paints: carry out pre-trials.
Characteristics:
Advantages
- Good workability
- Powerful grab properties (green strength)
- Odourless
- Nail-free fixing
- For interior use on wall and ceiling
- For sheltered outdoor use on wall (canopy, balcony)
- Over paintable by an emulsion waterborne paint
- Bonds to a wide range of substrates
Colour Off white
Shelf Life:
18 months from the date of production if stored in undamaged original sealed containers, in dry conditions and protected from direct sunlight at temperatures between +10°C and +25°C.
Sika MaxTack® must be protected from frost.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Sika AnchorFix-1 Grey Structural Adhesive 300 ml
Overview
Sika AnchorFix-1 Grey Structural Adhesive 300 ml is a high quality chemical anchoring adhesive designed to deliver consistent, reliable bonding performance for trade professionals and serious DIYers. It is formulated for dependable adhesion, easy application, and clean finishing so you can complete jobs with confidence and minimal rework.
Why choose this product
Reliable bond performance supported by proven chemistry and rigorous quality control.
Smooth, predictable application that helps reduce mess and cleanup time.
Versatile adhesion profile suited to a wide range of substrates and project types.
Clear guidance on surface preparation, application method, and curing to help achieve the best possible result.
Suitable for residential fit-outs, maintenance, repairs, and light commercial projects.
Suitable materials
concrete
masonry
natural stone
hollow substrates with sleeves
Typical applications
General installation, repair, and maintenance where a durable bond is required.
Interior work that benefits from a neat finish and tidy joints.
Projects where dependable initial grab and high final strength are important.
Surface preparation
Ensure all surfaces are clean, sound, and dry. Remove dust, oil, release agents, laitance, and any loose or flaky material. For dense or non-porous surfaces, light abrasion improves key. Test adhesion on a small area if you are unsure about compatibility. Observe local safety requirements when sanding or cutting.
Application
Check ambient and substrate temperature. Observe minimum bond and substrate temperatures specified by the manufacturer. Keep resin warm in cold weather.
Cut the nozzle to the required bead size or prepare the container according to the product type.
Apply an even bead or spread with a suitable trowel where required. Avoid trapping air.
Press the materials together, ensuring full contact. For sheet goods, roll firmly to promote transfer and wetting.
Support, clamp, or brace as needed until the adhesive develops sufficient handling strength.
Cure and working time
Cure time depends on substrate temperature. At 20°C typical cure is within a few hours. Do not load anchors until fully cured. Cooler temperatures and high humidity will slow curing, while warmer, drier conditions accelerate it. Do not load or finish until the bond has developed adequate strength. Always follow best practice for ventilation and safe handling during cure.
Coverage
Coverage varies based on substrate profile, bead size, and installation method. As a guide, a 300 ml cartridge with a 6 mm round bead can lay several linear meters. For trowel applied adhesives, a notched trowel pattern will influence yield. Plan to have extra on hand for porous or uneven surfaces.
Limitations
Do not apply to surfaces that are visibly wet unless the product specifically allows damp application.
Avoid continuous water immersion unless the product is rated for that exposure.
Not all plastics are compatible; test on polypropylene, polyethylene, and PTFE if required.
Observe maximum service temperature and any movement or vibration limits appropriate to the application.
Clean up
Wipe uncured resin with appropriate solvent. Once cured, it is chemically resistant and must be removed mechanically. Always read the product label and follow local regulations for disposal of leftover material and containers.
Safety
Read the label before use and keep out of reach of children. Use in a well ventilated area. Wear protective gloves and eye protection. If on skin, wash with soap and water. If in eyes, rinse cautiously and seek medical advice if irritation persists. Do not ingest. Refer to the product Safety Data Sheet for detailed information.
Storage
Store upright in a cool, dry place away from direct sunlight and heat sources. Keep the cap or nozzle tightly closed when not in use. Do not allow to freeze unless the product literature states it is freeze-thaw stable. Rotate stock to use older product first.
Troubleshooting
Poor adhesion: Check surface prep, remove contaminants, and reapply with firm pressure.
Slow cure: Verify temperature and humidity. Increase airflow or allow more time.
Excess squeeze-out: Reduce bead size or spread more evenly. Clean residue before it skins.
Frequently asked questions
Can I paint over it? Many adhesives can be overcoated once cured. Test a small area with your paint system first.
Is it suitable outdoors? Check the product label for outdoor rating. Protect fresh adhesive from rain until cured.
What is the service temperature range? Typical service ranges suit most building environments. Avoid direct flame or extreme heat.
How do I remove cured material? Mechanical methods are usually required. Work carefully to avoid damaging surrounding finishes.
Why buy from Glues Australia
We curate a focused range so you can choose faster and build better. Every product listing includes practical how to detail, compatibility guidance, and straightforward support from a team that understands trade requirements. Order with confidence and get your project moving.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Sika AnchorFix 3001 Epoxy Chemical Anchoring Adhesive 250 ml Sika AnchorFix 3001 is a two part, high performance epoxy anchoring adhesive for fixing threaded rods, bolts, and reinforcement bars into cracked or uncracked concrete and other solid substrates. It delivers very high load capacity, reliable performance in damp concrete, and a long open time that makes placement simple on site. Why choose AnchorFix 3001 High load capacity with shrinkage free cure Works in dry or damp concrete and overhead locations Long open time for easier installation Seismic tested C1 and fire resistant Styrene free and low wastage Approved for contact with drinking water Typical uses Rebar and threaded rod anchoring in new builds and refurbishments Fixing balustrades, handrails, supports, and railings Securing window and door frames and general metalwork Suitable substrates Concrete cracked or uncracked Solid and hollow masonry Natural and reconstituted stone Wood and solid rock Key approvals Complies with NCC reference to AS 5216 design of post installed fastenings in concrete Potable water approved to AS 4020 ICC-ES ESR-3608 for anchoring in cracked concrete under static, wind, and earthquake loading Specifications
Chemistry
Epoxy, two part 1 to 1 by volume
Colour
Mixed grey
Density
Approx 1.49 kg per L
Service temperature
Long term from minus 40 °C to plus 40 °C
Compressive strength
Approx 85 N per mm² at 7 days
Tensile strength
Approx 23 N per mm² at 7 days
Mixing
Static mixer nozzle supplied, standard sealant gun for 250 ml
Packaging
250 ml cartridge
Shelf life
24 months unopened at 10 to 25 °C in dry storage
Open time and cure guide
Substrate or ambient temperature
Open time
Full cure
+25 to +30 °C
About 8 minutes
About 6 hours
+20 to +25 °C
About 11 minutes
About 7 hours
+15 to +20 °C
About 15 minutes
About 8 hours
+10 to +15 °C
About 20 minutes
About 12 hours
+5 to +10 °C
Use with warmed cartridge minimum 10 °C
About 24 hours
How to use Drill the hole to the specified diameter and depth for the anchor size. Clean thoroughly. Blow out dust with oil free compressed air and brush with a steel hole cleaning brush. Repeat the blow and brush steps to remove all fines. Fit the static mixer. Dispense material until a uniform grey appears and discard the first small amount. Inject from the bottom of the hole while withdrawing the nozzle to avoid trapping air. For deep holes use an extension tube. In hollow masonry use a perforated sleeve. Insert the anchor with a slow rotary motion until set at depth. Excess resin should slightly extrude. Do not disturb or load until the full cure time has elapsed for the temperature. Good to know Non sag formula for overhead applications Ensure substrate is sound, clean, and at least 3 °C above dew point Clean tools immediately after use. Cured material must be removed mechanically What is included One 250 ml cartridge with static mixer nozzle. Applicator gun not included. Storage Store sealed in a cool, dry place between 10 and 25 °C. Keep out of direct sun and away from moisture. Safety Read the Safety Data Sheet before use. Wear suitable PPE and provide ventilation. Keep out of reach of children.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Sika AnchorFix®-1 is a high-performance, styrene-free chemical anchoring adhesive designed for fast and reliable installations in both construction and DIY projects. This two-component, solvent-free, polyester-based adhesive is ideal for securing rebars, threaded rods, bolts, and special fastening systems in concrete, hollow and solid masonry, hard natural stone, and solid rock. It cures rapidly, even in low temperatures, and can be applied using standard guns.
Advantages:
Fast curing
Compatible with standard guns
Usable in low temperatures
High load capacity
ETA approved
Non-sag, even overhead
Styrene-free
Low odor and wastage
Technical Information:
Compressive Strength: ~60 N/mm² (7 days, +20°C)
Modulus of Elasticity in Compression: ~3,500 N/mm²
Tensile Strength in Flexure: ~28 N/mm²
Tensile Strength: ~12 N/mm²
Temperature Resistance: +50°C (long-term), +80°C (short-term)
Glass Transition Temperature: +60°C
Color:
Component A: White
Component B: Black
Mixed: Light grey
Usage: Ideal for various grades of rebars, threaded rods, bolts, and special fastening systems. Substrates may vary, so testing is recommended to ensure suitability, especially with natural stones. Always ensure the substrate is clean, dry, and free of contaminants. Perform pull-out tests if the substrate strength is unknown.
Mixing and Application:
Mix the components in a 10:1 ratio by volume.
The material must be between +5°C and +40°C for application.
Ensure the substrate temperature is between -10°C and +40°C.
Shelf Life and Storage:
Shelf life is 12 months from the date of production when stored properly.
Store in unopened, sealed, and undamaged packaging in dry conditions between +5°C and +25°C.
Curing Times:
+30°C: Open time 4 minutes, Curing time 35 minutes
+25°C: Open time 4 minutes, Curing time 40 minutes
+20°C: Open time 5 minutes, Curing time 50 minutes
+10°C: Open time 6 minutes, Curing time 85 minutes
+5°C: Open time 10 minutes, Curing time 145 minutes
-10°C: Open time 30 minutes, Curing time 24 hours
Approvals and Certifications:
Complies with NCC 2019 reference to AS 5216:2018 for post-installed and cast-in fastenings in concrete.
ETA-approved for use in masonry and non-cracked concrete, with CE marking.
Cleaning of Equipment:
Clean tools with Sika® Colma Cleaner immediately after use. Hardened material can only be removed mechanically.
For detailed design considerations, refer to "Technical Documentation Sika AnchorFix®-1" (Ref: 870 43 01).
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Premium, coarse-grained, wide crack filler, Coarse-grained consistency for maximum filling capacity. Application thickness up to 5mm per layer, to a maximum of 30mm. Fast drying and easy to sand
Use:
Suitable for indoor filling and repair where thicker filling capability is needed
A finer grade filler such as Sika® Filler 101 should be used for finishing surfaces before painting
Features
Ready to use, no mixing required
Easy application
Thick layer filling and levelling ability
High initial tack or grab on plaster and concrete
Quick drying
Colour: Grey
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Premium, coarse-grained, wide crack filler, Coarse-grained consistency for maximum filling capacity. Application thickness up to 5mm per layer, to a maximum of 30mm. Fast drying and easy to sand
Use:
Suitable for indoor filling and repair where thicker filling capability is needed
A finer grade filler such as Sika® Filler 101 should be used for finishing surfaces before painting
Features
Ready to use, no mixing required
Easy application
Thick layer filling and levelling ability
High initial tack or grab on plaster and concrete
Quick drying
Colour: Grey
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Premium, coarse-grained, wide crack filler, Coarse-grained consistency for maximum filling capacity. Application thickness up to 5mm per layer, to a maximum of 30mm. Fast drying and easy to sand
Use:
Suitable for indoor filling and repair where thicker filling capability is needed
A finer grade filler such as Sika® Filler 101 should be used for finishing surfaces before painting
Features
Ready to use, no mixing required
Easy application
Thick layer filling and levelling ability
High initial tack or grab on plaster and concrete
Quick drying
Colour: Grey
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
SIKA® FILLER 107 | PLASTER FILLER
Premium, wet area, fine surface filler
Fine surface filler that will not rehydrate in humid conditions such as kitchens and bathrooms
Application thickness up to 4mm per layer
Suitable for use in exterior situations when overpainted
USE
Sika® Filler 107 is suitable for interior surface filling work on plaster, woven fabrics, old wallpapers, etc. in wet environments such as kitchens and bathrooms etc.
CHARACTERISTICS AND ADVANTAGES
Ready to use, no mixing required
Easy application
High initial tack or grab on plaster and concrete
Quick drying
Not sensitive to moisture
Appearance / Colours Grey / blue, grey paste
Storage
Storage Conditions / Shelf-Life
12 months from date of production if stored properly in undamaged and unopened original sealed packaging, in dry conditions. Protect from frost.
Technical Data
Chemical Base Filled styrene-acrylate dispersion
Density ~ 1.050 kg/l
Solid Content ~ 62%
Grading Dmax : 0.15 mm
Layer Thickness 4 mm max.
Consumption This depends on the substrate roughness and thickness of the layer applied.
As a guide, ~ 1 l of Sika® Filler-107 can fill ~ 1 m2 per mm thick.
Substrate Quality Clean, free from dust, dry and oil.
Application Conditions / Limitations
Substrate Temperature +5°C min. / +35°C max.
Ambient Temperature +5°C min. / +35°C max.
Application Instructions
Mixing Sika® Filler-107 is supplied ready to use - no mixing is required.
Application Method / Tools
Sika® Filler-107 can be applied with a spatula in layer thicknesses from 0 - 4 mm. When filling deep holes or cracks above 4 mm the filler should be applied in several layers and must be allowed to almost dry before each subsequent layer is applied.
Cleaning of Tools Clean all tools and application equipment with water immediately after use. Hardened/cured material can only be mechanically removed.
Waiting Time / Overcoating
Drying Time: 2 to 4 hours (thicker applications might require longer time)
Paintability: Approx. 12 hours
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
SIKA® FILLER 107 | PLASTER FILLER
Premium, wet area, fine surface filler
Fine surface filler that will not rehydrate in humid conditions such as kitchens and bathrooms
Application thickness up to 4mm per layer
Suitable for use in exterior situations when overpainted
USE
Sika® Filler 107 is suitable for interior surface filling work on plaster, woven fabrics, old wallpapers, etc. in wet environments such as kitchens and bathrooms etc.
CHARACTERISTICS AND ADVANTAGES
Ready to use, no mixing required
Easy application
High initial tack or grab on plaster and concrete
Quick drying
Not sensitive to moisture
Appearance / Colours Grey / blue, grey paste
Packaging 500 ml plastic tube
5 l and 10 l plastic pail
Storage
Storage Conditions / Shelf-Life
12 months from date of production if stored properly in undamaged and unopened original sealed packaging, in dry conditions. Protect from frost.
Technical Data
Chemical Base Filled styrene-acrylate dispersion
Density ~ 1.050 kg/l
Solid Content ~ 62%
Grading Dmax : 0.15 mm
Layer Thickness 4 mm max.
Consumption This depends on the substrate roughness and thickness of the layer applied.
As a guide, ~ 1 l of Sika® Filler-107 can fill ~ 1 m2 per mm thick.
Substrate Quality Clean, free from dust, dry and oil.
Application Conditions / Limitations
Substrate Temperature +5°C min. / +35°C max.
Ambient Temperature +5°C min. / +35°C max.
Application Instructions
Mixing Sika® Filler-107 is supplied ready to use - no mixing is required.
Application Method / Tools
Sika® Filler-107 can be applied with a spatula in layer thicknesses from 0 - 4 mm. When filling deep holes or cracks above 4 mm the filler should be applied in several layers and must be allowed to almost dry before each subsequent layer is applied.
Cleaning of Tools Clean all tools and application equipment with water immediately after use. Hardened/cured material can only be mechanically removed.
Waiting Time / Overcoating
Drying Time: 2 to 4 hours (thicker applications might require longer time)
Paintability: Approx. 12 hours
Sold Out
Express Post: 1-3 Days | Standard Post: 2-5 Days
Sika® Filler One Strike Maxi is revolutionary ready-mixed lightweight filler for the preparation of numerous surfaces prior to painting or wallpapering. For filling on plaster, brick, stone, wood and render.
Fills in one go- No need to build up layers of filler – fills up to 75mm deep in one application
No sanding or sagging
Fast drying and easy to sand
CHARACTERISTICS AND ADVANTAGES
Fills in one go- No need to build up layers of filler – fills up to 75mm deep in one application
No sanding or sagging
Fast drying and easy to sand
Internal/external use
Overpaintable
Overstainable
Easy to use
Dries brilliant white
COLOUR: White
Sika® Filler One Strike is revolutionary ready-mixed lightweight filler for the preparation of numerous surfaces prior to painting or wallpapering. Based on high strength lightweight polymeric fillers, the product outperforms conventional fillers in most applications
Designed for professional and D.I.Y use.
Uses
Sika® Filler One Strike 1 is suitable for filling of gap in:
Plaster
Brick
Stone
Wood
Render
Characteristics
Advantages
Fills in one go- No need to build up layers of filler - fills up to 75mm deep in one application.
Easy to use - lightweight paste is incredibly easy to apply.
No sanding required - finishes to a smooth surface.
No sagging - the lightweight properties of Sika® Filler One Strike prevent sagging even on ceilings.
Non-shrink - will not shrink back whilst drying.
Quick drying - ready to paint/paper in just 30 minutes.
Overpaintable with most solvent based and emulsion paints.
Overstainable
Internal/external use.
Dries brilliant white
Product Data
Appearance / Colour Lightweight brilliant white paste
Packaging 300 ml cartridge
Storage
Storage Conditions /
Shelf-Life
24 months from date of production if stored properly in undamaged and unopened original sealed packaging, in cool and dry conditions. Protect from frost.
Technical Data
Chemical Base Filled water based polymer dispersion.
Density ~ 0.49-053 kg/l
Solid Content ~ 61% (w/w)
pH 8.0 – 9.0
Grading Dmax : 0.12 mm
Layer Thickness Maximum Width: 50 mm
Maximum Fill: 75 mm
System Information
Application Details
Consumption This depends on the substrate roughness and thickness of the layer applied.
As a guide, ~ 1 cartridge of Sika®
Filler One Strike yields 0.3 m
2 per mm thick.
Substrate Quality Clean, free from dust, dry and oil.
Application Conditions / Limitations
Substrate Temperature +5°C min. / +30°C max.
Ambient Temperature
+5°C min. / +30°C max.
Application Instructions
Mixing Sika® Filler One Strike is supplied ready to use - no mixing is required.
Application Method /
Tools
Apply direct from pail with spatula/spreader. Smooth over surface and allow drying. Sanding is not normally required although the product may be sanded if required.
Sika® Filler One Strike can be painted over after approx. 30 minutes using water based paints. Leave to dry for 12 hours when using solvent based paints. Cleaning of Tools Clean all tools and application equipment with water immediately after use.
Hardened / cured material can only be mechanically removed.
Waiting Time /
Overcoating
Drying Time:
Note:
~ 30 minutes at 20°C
The drying time correspond to thin layer thickness. If deep holes or cracks are filled, longer time is required in order for the product to harden in its full thickness.
Notes on Application /
Limitations
• Do not use to fill plastic or metals.
• Do not apply when rain is imminent (external use).
• Do not apply in temperatures (ambient and surface) below 5°C.
• If using externally overpainting is essential
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
SIKA® FILLER-101 | FINE SURFACE FILLER
Premium, fine surface filler
Very fine consistency for fine surface filling
Application thickness up to 3mm per layer
Fast drying and easy to sand
USE
Suitable for indoor filling work on plaster boards, fabrics, old wallpapers, etc.
Smooth finish
CHARACTERISTICS AND ADVANTAGES
Ready to use, no mixing required
Easy application
High initial tack or grab on plaster and concrete
Quick drying
COLOUR: White
Appearance / Colour White paste
Packaging 500 ml plastic tube
Storage
Storage Conditions / Shelf-Life
12 months from date of production if stored properly in undamaged and unopened original sealed packaging, in cool and dry conditions. Protect from frost.
Technical Data
Chemical Base Filled styrene-acrylate dispersion.
Density ~ 1.100 kg/l
Solid Content
~ 55%
Grading Dmax : 0.12 mm
Layer Thickness 3 mm max.
Application Details
Consumption
This depends on the substrate roughness and thickness of the layer applied.
As a guide, ~ 1 l of Sika®
Filler-101 can fill ~ 1 m2 per mm thick.
Substrate Quality Clean, free from dust, dry and oil.
Application
Conditions / Limitations
Substrate Temperature +5°C min. / +35°C max.
Ambient Temperature +5°C min. / +35°C max.
Application Instructions
Mixing Sika® Filler-101 is supplied ready to use - no mixing is required.
Application Method / Tools
Sika® Filler-101 can be applied with spatula in layer thicknesses from 0 - 3 mm. When filling deeper holes or cracks the filler must be applied in several layers and must be allowed to almost dry. Holes and cracks from 4 - 15 mm can more easily be filled with Sika® Filler-105. When dried finish the surface with Sika® Filler-101. Cleaning of Tools Clean all tools and application equipment with water immediately after use. Hardened / cured material can only be mechanically removed.
Waiting Time / Overcoating
Drying Time: ~ 2 hours
Paintability: ~ 4 hours
Value Base All technical data stated in this Product Data Sheet are based on laboratory tests.
Actual measured data may vary due to circumstances beyond our control.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
SIKA® FILLER-101 | FINE SURFACE FILLER
Premium, fine surface filler
Very fine consistency for fine surface filling
Application thickness up to 3mm per layer
Fast drying and easy to sand
USE
Suitable for indoor filling work on plaster boards, fabrics, old wallpapers, etc.
Smooth finish
CHARACTERISTICS AND ADVANTAGES
Ready to use, no mixing required
Easy application
High initial tack or grab on plaster and concrete
Quick drying
COLOUR: White
Appearance / Colour White paste
Packaging 500 ml plastic tube
Storage
Storage Conditions / Shelf-Life
12 months from date of production if stored properly in undamaged and unopened original sealed packaging, in cool and dry conditions. Protect from frost.
Technical Data
Chemical Base Filled styrene-acrylate dispersion.
Density ~ 1.100 kg/l
Solid Content
~ 55%
Grading Dmax : 0.12 mm
Layer Thickness 3 mm max.
Application Details
Consumption
This depends on the substrate roughness and thickness of the layer applied.
As a guide, ~ 1 l of Sika®
Filler-101 can fill ~ 1 m2 per mm thick.
Substrate Quality Clean, free from dust, dry and oil.
Application
Conditions / Limitations
Substrate Temperature +5°C min. / +35°C max.
Ambient Temperature +5°C min. / +35°C max.
Application Instructions
Mixing Sika® Filler-101 is supplied ready to use - no mixing is required.
Application Method / Tools
Sika® Filler-101 can be applied with spatula in layer thicknesses from 0 - 3 mm. When filling deeper holes or cracks the filler must be applied in several layers and must be allowed to almost dry. Holes and cracks from 4 - 15 mm can more easily be filled with Sika® Filler-105. When dried finish the surface with Sika® Filler-101. Cleaning of Tools Clean all tools and application equipment with water immediately after use. Hardened / cured material can only be mechanically removed.
Waiting Time / Overcoating
Drying Time: ~ 2 hours
Paintability: ~ 4 hours
Value Base All technical data stated in this Product Data Sheet are based on laboratory tests.
Actual measured data may vary due to circumstances beyond our control.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
SIKA® FILLER-101 | FINE SURFACE FILLER
Premium, fine surface filler
Very fine consistency for fine surface filling
Application thickness up to 3mm per layer
Fast drying and easy to sand
USE
Suitable for indoor filling work on plaster boards, fabrics, old wallpapers, etc.
Smooth finish
CHARACTERISTICS AND ADVANTAGES
Ready to use, no mixing required
Easy application
High initial tack or grab on plaster and concrete
Quick drying
COLOUR: White
Appearance / Colour White paste
Packaging 500 ml plastic tube
Storage
Storage Conditions / Shelf-Life
12 months from date of production if stored properly in undamaged and unopened original sealed packaging, in cool and dry conditions. Protect from frost.
Technical Data
Chemical Base Filled styrene-acrylate dispersion.
Density ~ 1.100 kg/l
Solid Content
~ 55%
Grading Dmax : 0.12 mm
Layer Thickness 3 mm max.
Application Details
Consumption
This depends on the substrate roughness and thickness of the layer applied.
As a guide, ~ 1 l of Sika®
Filler-101 can fill ~ 1 m2 per mm thick.
Substrate Quality Clean, free from dust, dry and oil.
Application
Conditions / Limitations
Substrate Temperature +5°C min. / +35°C max.
Ambient Temperature +5°C min. / +35°C max.
Application Instructions
Mixing Sika® Filler-101 is supplied ready to use - no mixing is required.
Application Method / Tools
Sika® Filler-101 can be applied with spatula in layer thicknesses from 0 - 3 mm. When filling deeper holes or cracks the filler must be applied in several layers and must be allowed to almost dry. Holes and cracks from 4 - 15 mm can more easily be filled with Sika® Filler-105. When dried finish the surface with Sika® Filler-101. Cleaning of Tools Clean all tools and application equipment with water immediately after use. Hardened / cured material can only be mechanically removed.
Waiting Time / Overcoating
Drying Time: ~ 2 hours
Paintability: ~ 4 hours
Value Base All technical data stated in this Product Data Sheet are based on laboratory tests.
Actual measured data may vary due to circumstances beyond our control.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Sika Firerate is a gunnable acrylic based jointing and sealing compound specially formulated with inorganic fillers to provide a fire barrier. Sika Firerate has been tested for fire resistance for up to 4 hours according to AS 1530.4 in masonry wall and floor joints.
USE
Sika Firerate is suitable for sealing joints in concrete or masonry that must have a fire rated resistance to Australian Standards. Sika Firerate also fulfils the basic function of a gap filler and joint sealant against water and dust penetration.
CHARACTERISTICS AND ADVANTAGES
Safe to use – contains no asbestos or fibres.
Paintable.
Good flexibility and adhesion to concrete and masonry.
Interior use only.
Easily applied with normal caulking equipment.
Easy tooling off.
Economical – single product for both fireproofing and sealing functions.
Water clean-up of tools and equipment while still uncured.
Excellent acoustic performance, test report available.
COLOUR
Grey
CHARACTERISTICS/ADVANTAGES
• Up to 4 hours fire resistance according to AS 1530.4
• Very good resistance to weathering
• Movement capability of ± 20 %
• Easy to smooth and very good workability
• Good adhesion to many different substrates
• Water clean-up of uncured sealant
.
APPROVALS / STANDARDS
• AS 1530.4 FRL
• ISO 717.2 Rw (Ctr) = 64 (-13)
SUBSTRATE PREPARATION
The substrate must be clean, dry, sound and homogeneous, free from oils, grease, dust and loose or friable particles. Sika® Firerate adheres without primers and/or activators.
APPLICATION METHOD / TOOLS
Sika® Firerate is supplied ready to use. After the necessary substrate preparation, insert a suitable backing rod to the required depth and apply any primer if necessary. Insert a foil pack or cartridge into the sealant gun and extrude Sika® Firerate into the joint making sure that it comes into full contact with the sides of the joint and avoids any air entrapment. Sika® Firerate sealant must be firmly tooled against the joint sides to ensure adequate adhesion. It is recommended to use masking tape where exact joint lines or neat lines are required. Remove the tape within the skin time. Do not use tooling products containing solvents. Water can be used if wet tooling is required.
CLEANING OF TOOLS
Clean all tools and application equipment immediately after use with water. Once cured, residual material can only be removed mechanically
LIMITATIONS
• Sika® Firerate may be overpainted with solvent free paints.
• Do not use Sika® Firerate on damp and/or wet substrates.
• Do not apply Sika Firerate at temperatures below 5ºC
• Do not use Sika® Firerate to seal joints in and around swimming pools.
• Do not use Sika® Firerate to seal joints in external applications on non-porous substrates.
• Do not use Sika® Firerate for joints under water pressure or for permanent water immersion.
• Do not expose uncured Sika® Firerate to rain or water as this may interfere with the curing reaction.
BASIS OF PRODUCT DATA
All technical data stated in this Data Sheet are based on laboratory tests. Actual measured data may vary due to circumstances beyond our control.
ECOLOGY, HEALTH AND SAFETY
For information and advice on the safe handling, storage and disposal of chemical products, users shall refer to the most recent Safety Data Sheet (SDS) containing physical, ecological, toxicological and other safety related data.
Sold Out
Express Post: 1-3 Days | Standard Post: 2-5 Days
A transparent polyurethane paste adhesive. SuperGrip 30 Minute is a versatile, ready to use, fast curing, general purpose construction adhesive.
Uses Bonding of:
• Edge bonding of particle board flooring
• Timber & MDF
• Marble & Stone
• Concrete
• Block/blocks
• Glass
• Fibre cement
• Tiles
• Rubber
• Metals
• Aluminium
Advantages
• 100% waterproof (BS-EN204)
• Incredibly strong
• Bonds almost anything, including LOSP treated timber
• Non drip
• No shrinkage
• Cures in 30 minutes*
• Interior and exterior use
• High temperature resistance (minus 30ºC to 100ºC)
• Cures transparent
• Does not stain
Technical Data (Typical)
Density: 1.12 g/cm³
Solids content: 100% approximately
Cure type: Humidity curing
Application temperature: 5ºC to 35ºC
Service temperature: -30ºC to +100ºC
Relocation time: Approximately 5-10 minutes depending on temperature and ventilation.
Cure time: Approximately 30 minutes, depending on temperature, moisture content of
surfaces and adhesive thickness.
Strength will increase over 24 hours.
Flammability: Non flammable
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Showerbond is a solvent based, fast grab, gun grade adhesive. It has been specifically formulated for bonding plastic shower linings to gypsum plasterboard or fibre cement wall linings, as well as timber.
Use Showerbond is used for bonding plastic shower linings to wall linings.
Advantages
Fast curing.
Will not damage plastic shower liners.
Panels can be relocated for up to 30 minutes after positioning.
Excellent adhesion to most common building materials.
Easy to apply and clean up.
Recommended for use with Seratone Silverseal, Clearlite Showers, Duracryl®
,and Athena Showers
Product Data
Form: Smooth paste
Colour: Green
Storage & Shelf Life: Twelve (12) months when stored in original unopened containers in a cool, dry place
away from naked flames.
Packaging: Showerbond is supplied in 300 ml cartridges.
Technical Data
Solids content: 65% approx. by weight
Cure type: Solvent release
Cure rate: 24 hours @ 20C
Application temperature: 5C to 35C
Skinning time: 1 minute
Relocation time: Up to 30 minutes, depending on temperature and ventilation
Flammability: Flammable solvents are released during cure
Toxicity: Non toxic when cured
Movement accommodation: Slight, will accept normal building movement
Coverage: On average, one cartridge of Showerbond will supply 20 metres of 5 mm bead.
Application Conditions
Surface Preparation Ensure both surfaces to be bonded are clean, dry and grease free. Cut nozzle on cartridge as shown below so that a 5-6 mm bead will be extruded.
Application
Apply a 5-6 mm bead in vertical lines at 100 mm centres onto substrate, and apply continuous bead within 15 mm of the perimeter line of the shower lining.
Place shower lining onto wall within 10 minutes and firmly press the entire sheet with your hands so that full contact is made with all beads of adhesive.
Brace the lining as required in the shower manufacturer's installation instructions.
Bracing if required should remain in position for not less than 18 hours. The shower should not be used for at least 24 hours after the wall lining has been installed. Do not apply blobs of adhesive. These will cause unsightly undulations and buckles in the sheet.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
SikaBond®-115 Max Tack is a 1-part construction adhesive with high final strength, designed for bonding most construction material substrates. It is suitable for internal and sheltered outdoor use.
Key Features:
Easy to apply
Easy to clean
Rapid build-up of strength
High final strength
Very low emissions (Acrylic dispersion)
Applications:
Ideal for bonding various construction components, including:
Skirting boards
Wooden frames
Battens
Mouldings
Panels
Terracotta tiles
Anodised aluminium
Polystyrene mouldings and ceiling tiles
Bonds well to materials like:
Concrete
Mortar
Fibre cement
Wood
Painted surfaces
Shelf Life & Storage:
Shelf life: 18 months from production date.
Storage conditions: Store in original, unopened, undamaged packaging in a dry environment, at temperatures between +5°C and +25°C.
Technical Details:
Density: ~1.40 kg/l (ISO 1183-1)
Application Instructions:
Follow standard building and construction practices when applying SikaBond®-115 Max Tack.
Substrate Preparation:
Ensure the substrate is clean, sound, dry, and free from contaminants like oil, grease, cement laitance, old sealants, and loose paint.
Remove dust and friable material through wire brushing, grinding, sanding, or other mechanical methods.
For best results, follow these priming and pre-treatment steps:
Non-Porous Substrates:
For surfaces such as aluminium, anodised aluminium, stainless steel, PVC, and glazed tiles:
Slightly roughen the surface using a fine abrasive pad.
Clean and pre-treat using Sika® Aktivator-205 applied with a clean cloth. Wait 15 minutes before applying adhesive (within 6 hours).
For metals like copper, brass, and titanium-zinc:
Clean and pre-treat using Sika® Aktivator-205. After 15 minutes, apply Sika® Primer-3 N by brush. Wait at least 30 minutes (within 8 hours) before applying adhesive.
Porous Substrates:
For concrete, aerated concrete, mortars, and bricks:
Prime the surface with Sika® Primer-3 N. Wait at least 30 minutes (within 8 hours) before applying adhesive.
Note: Primers are adhesion promoters and are not a substitute for proper surface preparation. They also enhance the long-term bond strength.
Cleaning of Tools:
Clean tools and equipment immediately after use with Sika® Remover-208.
For skin cleaning, use Sika® Cleaning Wipes-100.
Once cured, the adhesive can only be removed mechanically.
For more information, please consult Sika Technical Services.
Sold Out
Express Post: 1-3 Days | Standard Post: 2-5 Days
Sika MaxTack® 100g: Secure Your Projects with Unmatched Initial Grab
Product Overview
Sika MaxTack® 100g is a high-strength, solvent-free adhesive with incredible initial tack.
Advantages
High initial tack and powerful grab
Secure bonding without the need for tapes, nails, or screws
Excellent workability and over-paintable with water-based paints
Perfect for both interior and sheltered outdoor use
Applications
Designed for the bonding of:
Skirting boards, wood frames, and panels
Anodised aluminum and hard PVC profiles
Polystyrene mouldings, ceiling tiles, and more
Packaging
Available in 100g foil packs, 24 packs per box.
Color Options
Off-white in color.
Application Instructions
Ensure the substrate is clean and dry. For best results, follow our standard construction guidelines.
Cleaning & Maintenance
Clean tools immediately after use with water. Hardened material can only be removed mechanically.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
SikaBond®-145 SuperGrip
Premium polyurethane construction adhesive with fast build up of Strength
SikaBond®-145 SuperGrip is a premium grade one-component polyurethane construction adhesive with good initial grab and high strength after 30 minutes^. SikaBond®-145 SuperGrip is a versatile, ready to use, fast curing, general purpose construction adhesive suitable for interior and exterior use.
One-component.
Interior & exterior.
Non-shrink.
Usage
SikaBond®-145 SuperGrip is suitable for use in construction and repair applications where a permanent strong bond is required between porous-nonporous surfaces. SikaBond®-145 SuperGrip is suitable for bonding most common construction materials such as:
Wood
MDF
Concrete
Brick
Metal
Polystrene
Polyurethane foam
Some PVC
Marble
Granite
Ceramic
LOSP Timber
Advantages
One-component.
Interior & exterior.
Non-shrink.
Non-sag.
High initial grab.
Adheres rapidly.
Stong bond in 30 minutes^.
Fast cure.
Solvent-free.
Resistant to heat.
Resistant to weathering.
Water resistant -D4 according to DIN En 204
Applies white, can dry translucent if applied in thin layers.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
SikaBond® - PVA is a high solids, one part Cross-linking PVA which meets the D3/BS EN204 specification. SikaBond® - PVA is an ideal product for bonding a wide range of timber components including tongue and groove solid timber and laminated flooring substrates giving tough, flexible permanent bonding.
Uses
SikaBond® -PVA can be used on most substrates due to its excellent adhesion. These include:
Timber
MDF boards
Particle boards
Ply woods
Advantages
- Excellent water resistance
- High bond strength within 24 hours
- Suitable for interior and exterior applications
Storage and Shelf Life
Store in a cool, dry place with 25oC maximum condition. This material will keep for at least twelve (12) months.
Instructions for Use
Surface Preparation Surfaces to be bonded should be clean, dry and free from dust and oil. Edges should be squarely machined to ensure maximum contact.
Application
SikaBond® -PVA is to be applied by squeeze bottle, brush or roller. Bonds should be assembled within a few minutes and then tightly clamped or pressed until the adhesive has set. Wipe off adhesive squeeze out immediately after assembly with a dry or lightly damp cloth.
Assemblies are best left overnight before moving or transportation. Maximum bond strength is achieved within 48 hours. Allow floors 24 hours for the adhesive to cure prior to using. SikaBond® -PVA should be used as supplied.
Cleaning Wipe off adhesive squeeze out immediately after assembly with a dry or lightly damp cloth.
Colour: White
Density: 1.08 kg/L
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Sikaflex®-111 Stick & Seal is a high-performance 1-part multipurpose adhesive and sealant that bonds and seals a wide range of construction materials for both internal and external applications. Its advanced silane-terminated polymer technology delivers exceptional adhesion without surface pre-treatment, even on damp substrates.
Key Features
Bonds well to a wide variety of substrates without surface pre-treatment
Adheres to damp concrete and other porous materials
Compatible with most construction materials, including EPS/XPS and building wraps
Excellent mechanical strength and weathering resistance
Low VOC, LEED v4 EQc 2 compliant, and EC 1PLUS certified
Ideal for bonding and sealing in indoor and outdoor environments
Where to Use
Designed for professional and DIY use across construction and renovation projects. Perfect for bonding or sealing:
Concrete and masonry
Wood and timber components
Ceramic, stone, and tiles
Metal surfaces
Glass and plastic materials such as PVC, PA, PET, and EPS/XPS
Applications
Adhesive for bonding construction components
Sealant for vertical and horizontal joints
Repairs, renovations, and installations in building and civil works
Technical Information
Composition
Silane-terminated polymer
Density
~1.40 kg/L (ISO 1183-1)
Shore A Hardness
~36 (after 28 days)
Tensile Strength
~1.5 N/mm² (ISO 37)
Elastic Recovery
~75 % (ISO 7389)
Service Temperature
−50 °C to +80 °C
Curing Rate
~3 mm per 24 h (at 23 °C / 50 % r.h.)
Skinning Time
~35 minutes (at 23 °C / 50 % r.h.)
Colour Options
Available in White, Concrete Grey, and Black.
Packaging
290 ml cartridge | 12 cartridges per box
Storage & Shelf Life
Store unopened in a cool, dry place between +5 °C and +25 °C. Shelf life 12 months from production date.
Certifications
CE Marking – EN 15651-1 (Facade elements Class F EXT-INT CC 20HM)
GEV-EMICODE EC 1PLUS (Very Low Emissions)
LEED v4 EQc 2 Low-Emitting Materials compliant
French VOC Regulation Class A+
Why Choose Sikaflex®-111 Stick & Seal
This versatile adhesive-sealant provides superior adhesion on most construction materials, making it the go-to solution for professionals and renovators who need reliable bonding and sealing performance. Whether you are working on concrete, metal, or plastic, Sikaflex®-111 Stick & Seal ensures a flexible, durable, and weather-resistant joint every time.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Sikaflex®-111 Stick & Seal is a high-performance 1-part multipurpose adhesive and sealant that bonds and seals a wide range of construction materials for both internal and external applications. Its advanced silane-terminated polymer technology delivers exceptional adhesion without surface pre-treatment, even on damp substrates.
Key Features
Bonds well to a wide variety of substrates without surface pre-treatment
Adheres to damp concrete and other porous materials
Compatible with most construction materials, including EPS/XPS and building wraps
Excellent mechanical strength and weathering resistance
Low VOC, LEED v4 EQc 2 compliant, and EC 1PLUS certified
Ideal for bonding and sealing in indoor and outdoor environments
Where to Use
Designed for professional and DIY use across construction and renovation projects. Perfect for bonding or sealing:
Concrete and masonry
Wood and timber components
Ceramic, stone, and tiles
Metal surfaces
Glass and plastic materials such as PVC, PA, PET, and EPS/XPS
Applications
Adhesive for bonding construction components
Sealant for vertical and horizontal joints
Repairs, renovations, and installations in building and civil works
Technical Information
Composition
Silane-terminated polymer
Density
~1.40 kg/L (ISO 1183-1)
Shore A Hardness
~36 (after 28 days)
Tensile Strength
~1.5 N/mm² (ISO 37)
Elastic Recovery
~75 % (ISO 7389)
Service Temperature
−50 °C to +80 °C
Curing Rate
~3 mm per 24 h (at 23 °C / 50 % r.h.)
Skinning Time
~35 minutes (at 23 °C / 50 % r.h.)
Colour Options
Available in White, Concrete Grey, and Black.
Packaging
290 ml cartridge | 12 cartridges per box
Storage & Shelf Life
Store unopened in a cool, dry place between +5 °C and +25 °C. Shelf life 12 months from production date.
Certifications
CE Marking – EN 15651-1 (Facade elements Class F EXT-INT CC 20HM)
GEV-EMICODE EC 1PLUS (Very Low Emissions)
LEED v4 EQc 2 Low-Emitting Materials compliant
French VOC Regulation Class A+
Why Choose Sikaflex®-111 Stick & Seal
This versatile adhesive-sealant provides superior adhesion on most construction materials, making it the go-to solution for professionals and renovators who need reliable bonding and sealing performance. Whether you are working on concrete, metal, or plastic, Sikaflex®-111 Stick & Seal ensures a flexible, durable, and weather-resistant joint every time.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Sikaflex®-111 Stick & Seal is a high-performance 1-part multipurpose adhesive and sealant that bonds and seals a wide range of construction materials for both internal and external applications. Its advanced silane-terminated polymer technology delivers exceptional adhesion without surface pre-treatment, even on damp substrates.
Key Features
Bonds well to a wide variety of substrates without surface pre-treatment
Adheres to damp concrete and other porous materials
Compatible with most construction materials, including EPS/XPS and building wraps
Excellent mechanical strength and weathering resistance
Low VOC, LEED v4 EQc 2 compliant, and EC 1PLUS certified
Ideal for bonding and sealing in indoor and outdoor environments
Where to Use
Designed for professional and DIY use across construction and renovation projects. Perfect for bonding or sealing:
Concrete and masonry
Wood and timber components
Ceramic, stone, and tiles
Metal surfaces
Glass and plastic materials such as PVC, PA, PET, and EPS/XPS
Applications
Adhesive for bonding construction components
Sealant for vertical and horizontal joints
Repairs, renovations, and installations in building and civil works
Technical Information
Composition
Silane-terminated polymer
Density
~1.40 kg/L (ISO 1183-1)
Shore A Hardness
~36 (after 28 days)
Tensile Strength
~1.5 N/mm² (ISO 37)
Elastic Recovery
~75 % (ISO 7389)
Service Temperature
−50 °C to +80 °C
Curing Rate
~3 mm per 24 h (at 23 °C / 50 % r.h.)
Skinning Time
~35 minutes (at 23 °C / 50 % r.h.)
Colour Options
Available in White, Concrete Grey, and Black.
Packaging
290 ml cartridge | 12 cartridges per box
Storage & Shelf Life
Store unopened in a cool, dry place between +5 °C and +25 °C. Shelf life 12 months from production date.
Certifications
CE Marking – EN 15651-1 (Facade elements Class F EXT-INT CC 20HM)
GEV-EMICODE EC 1PLUS (Very Low Emissions)
LEED v4 EQc 2 Low-Emitting Materials compliant
French VOC Regulation Class A+
Why Choose Sikaflex®-111 Stick & Seal
This versatile adhesive-sealant provides superior adhesion on most construction materials, making it the go-to solution for professionals and renovators who need reliable bonding and sealing performance. Whether you are working on concrete, metal, or plastic, Sikaflex®-111 Stick & Seal ensures a flexible, durable, and weather-resistant joint every time.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Sikaflex®-118 Extreme Grab is a 1- part construction adhesive with very high initial grab which bonds most construction material substrates. Internal and external use.
Very high initial grab
Fixing of heavy objects without temporary fixation
Good workability
Usage
An adhesive to bond most construction components and materials such as:
Concrete
Masonry
Most stones
Ceramic
Wood
Metals
Glass
Mirrors*
Advantages
Very high initial grab
Fixing of heavy objects without temporary fixation
Good workability
Very low emissions
Adhesive-sealant with CE marking
Packaging
290 ml cartridge, 12 cartridges per box
Colour
White
Composition
Silane terminated polymer
Storage conditions
The product must be stored in original, unopened and undamaged sealed packaging in dry conditions at temperatures between +5 °C and +25 °C. Always refer to packaging.
Density
~1.40 kg/l
Technical Information
Shore A hardness
~50 (after 28 d)
Tensile strength
~2.2 N/mm2
Tear propagation resistance
~10.0 N/mm
Service temperature
−40 °C min. / +80 °C max.
SUBSTRATE PREPARATION
The substrate must be sound, clean, dry and free of all contaminants such as dirt, oil, grease, cement laitance, old sealants and poorly bonded paint coatings which could affect adhesion of the adhesive.
For optimum adhesion and critical, high performance applications the following priming and/or pre-treatment procedures shall be followed:
Non-porous substrates
Aluminium, anodised aluminium, stainless steel, galvanised steel, powder coated metals or glazed tiles, slightly roughen surface with a fine abrasive pad. Clean and pre-treat using Sika® Aktivator-205 applied with a clean cloth.
Before bonding / sealing, allow a waiting time of > 15 minutes (< 6 hours).
Other metals, such as copper, brass and titanium-zinc, clean and pre-treat using Sika® Aktivator-205 applied with a clean cloth. After a waiting time of > 15 minutes (< 6 hours). Apply Sika® Primer-3 N applied by brush. Allow a further waiting time of > 30 minutes (< 8 hours) before bonding / sealing.
PVC has to be cleaned and pre-treated using Sika® Primer-215 applied with a brush. Allow a waiting time of > 15 minutes (< 8 hours) before bonding / sealing.
Porous substrates
Concrete, aerated concrete and cement based renders, mortars and bricks, prime surface using Sika® Primer-3 N applied by brush.
Before bonding / sealing, allow a waiting time of > 30 minutes (< 8 hours).
For more detailed advice and instructions contact Sika Technical Services.
Note: Primers are adhesion promoters and not an alternative to improve poor preparation / cleaning of joint surfaces. Primers also improve the long term adhesion performance of a sealed joint.
CLEANING OF EQUIPMENT
Clean all tools and application equipment immediately after use with Sika® Remover-208. Once cured, hardened material can only be removed mechanically.
For cleaning skin use Sika® Hand Wipes.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Multi-purpose adhesive sealant with a wide adhesion range
Sikaflex®-221 is a multi-purpose 1-component polyurethane adhesive / sealant that bonds well to a wide variety of substrates like metals, metal primers and paint coatings (2-component systems), ceramic materials and plastics. It is suitable for making permanent elastic seals.
Bonds well to a wide variety of substrates
Resistant to ageing
Can be sanded and painted
PRODUCT BENEFITS
Bonds well to a wide variety of substrates
Resistant to ageing
Can be sanded and painted
Passes EN45545-2 R1/R7 HL3
Non-corrosive
Low odour
NSF-approved for incidental food contact
Potable water approved (meets AS4020 requirements)
Usage
Sikaflex®-221 bonds well to a wide variety of substrates and is suitable for making permanent elastic seals . Suitable substrate materials are metals, metal primers and paint coatings (2-component systems), ceramic materials and plastics. It is ideally used for internal sealing and simple bonding applications. Seek manufacturer’s advice and perform tests on original substrates before using Sikaflex®-221 on materials prone to stress cracking. This product is suitable for experienced professional users only. Test with actual substrates and conditions have to be performed to ensure adhesion and material compatibility.
Surface preparation
Surfaces must be clean, dry and free from grease, oil and dust.
Surface treatment depends on the specific nature of the substrates and is crucial for a long lasting bond. Suggestions for surface preparation may be found on the current edition of the appropriate Sika® Pre-Treatment Chart. Consider that these suggestions are based on experience and have in any case to be verified by tests on original substrates.
Application
Sikaflex®-221 can be processed between 5 °C and 40 °C but changes in reactivity and application properties have to be considered. The optimum temperature for substrate and sealant is between 15 °C and 25 °C.
Sikaflex®-221 can be processed with hand, pneumatic or electric driven piston guns as well as pump equipment. For advice on selecting and setting up a suitable pump system, contact the System Engineering Department of Sika Industry.
Tooling and finishing
Tooling and finishing must be carried out within the skin time of the sealant. It is recommended using Sika® Tooling Agent N. Other finishing agents must be tested for suitability and compatibility prior the use.
Removal
Uncured Sikaflex®-221 can be removed from tools and equipment with Sika® Remover-208 or another suitable solvent. Once cured, the material can only be removed mechanically. Hands and exposed skin have to be washed immediately using hand wipes such as Sika® Cleaner-350H or a suitable industrial hand cleaner and water. Do not use solvents on skin.
Overpainting
Sikaflex®-221 can be painted after formation of a skin. If the paint requires a baking process, best performance is achieved by allowing the sealant to fully cure first. 1C-PUR and 2C-acrylic based paints are usually suitable. All paints have to be tested by carrying preliminary trials under manufacturing conditions. The elasticity of paints is usually lower than of sealants what could lead to cracking of the paint film in the joint area.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Multi-purpose adhesive sealant with a wide adhesion range
Sikaflex®-221 is a multi-purpose 1-component polyurethane adhesive / sealant that bonds well to a wide variety of substrates like metals, metal primers and paint coatings (2-component systems), ceramic materials and plastics. It is suitable for making permanent elastic seals.
Bonds well to a wide variety of substrates
Resistant to ageing
Can be sanded and painted
PRODUCT BENEFITS
Bonds well to a wide variety of substrates
Resistant to ageing
Can be sanded and painted
Passes EN45545-2 R1/R7 HL3
Non-corrosive
Low odour
NSF-approved for incidental food contact
Potable water approved (meets AS4020 requirements)
Usage
Sikaflex®-221 bonds well to a wide variety of substrates and is suitable for making permanent elastic seals . Suitable substrate materials are metals, metal primers and paint coatings (2-component systems), ceramic materials and plastics. It is ideally used for internal sealing and simple bonding applications. Seek manufacturer’s advice and perform tests on original substrates before using Sikaflex®-221 on materials prone to stress cracking. This product is suitable for experienced professional users only. Test with actual substrates and conditions have to be performed to ensure adhesion and material compatibility.
Surface preparation
Surfaces must be clean, dry and free from grease, oil and dust.
Surface treatment depends on the specific nature of the substrates and is crucial for a long lasting bond. Suggestions for surface preparation may be found on the current edition of the appropriate Sika® Pre-Treatment Chart. Consider that these suggestions are based on experience and have in any case to be verified by tests on original substrates.
Application
Sikaflex®-221 can be processed between 5 °C and 40 °C but changes in reactivity and application properties have to be considered. The optimum temperature for substrate and sealant is between 15 °C and 25 °C.
Sikaflex®-221 can be processed with hand, pneumatic or electric driven piston guns as well as pump equipment. For advice on selecting and setting up a suitable pump system, contact the System Engineering Department of Sika Industry.
Tooling and finishing
Tooling and finishing must be carried out within the skin time of the sealant. It is recommended using Sika® Tooling Agent N. Other finishing agents must be tested for suitability and compatibility prior the use.
Removal
Uncured Sikaflex®-221 can be removed from tools and equipment with Sika® Remover-208 or another suitable solvent. Once cured, the material can only be removed mechanically. Hands and exposed skin have to be washed immediately using hand wipes such as Sika® Cleaner-350H or a suitable industrial hand cleaner and water. Do not use solvents on skin.
Overpainting
Sikaflex®-221 can be painted after formation of a skin. If the paint requires a baking process, best performance is achieved by allowing the sealant to fully cure first. 1C-PUR and 2C-acrylic based paints are usually suitable. All paints have to be tested by carrying preliminary trials under manufacturing conditions. The elasticity of paints is usually lower than of sealants what could lead to cracking of the paint film in the joint area.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Elastic adhesive for vehicle assembly bonding
Sikaflex®-252 is an elastic 1-component polyurethane adhesive especially designed for bonding large components in vehicle assembly. It is suitable for bonding coated metal, GRP, ceramic materials and plastics.
Bonds well to a wide variety of substrates
Capable of withstanding high dynamic stresses
Good gap-filling properties
PRODUCT BENEFITS
Bonds well to a wide variety of substrates
Capable of withstanding high dynamic stresses
Good gap-filling properties
Can be painted
Vibration-damping
Electrically non-conductive
Usage
Sikaflex®-252 is suitable for assemblies that are subject to dynamic stresses. Suitable substrate materials are timber, metals, particularly aluminum (including anodized components), sheet steel (including phosphated, chromated and galvanized components), metal primers and paint coatings (2-component systems), ceramic materials and plastics. Seek manufacturer’s advice before using on plastics that are prone to stress cracking. This product is suitable for professional experienced users only. Tests with actual substrates and conditions have to be performed to ensure adhesion and material compatibility.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
High strength, structural grade polyurethane adhesive sealant
High strength elastic adhesive, suitable for structural joints subjected to high dynamic stress
Suitable for use on trucks, trailers and caravans with excellent adhesion to timber, metals, primers and paint coatings
Vibration dampening
USE
Sikaflex® 252 is suitable for structural joints that will be subjected to dynamic stresses. Suitable substrate materials are timber, metals, particularly aluminium (incl. anodized components), sheet steel (incl. phosphated, chromated and zinc-plated components), metal primers and paint coatings (2-c systems), ceramic materials and plastics.
CHARACTERISTICS AND ADVANTAGES
1-C formulation
Elastic
Can be overpainted
Good gap-filling properties
Capable of withstanding high dynamic stresses
Vibration
Damping
Non-corrosive
Electrically non-conductive
Bonds well to a wide variety of substrates
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Sikaflex®-291 Marine Adhesive Sealant Multifunctional, IMO-Compliant
Sikaflex®-291 is a non-sag, 1-component polyurethane sealant developed for the marine market. It cures on exposure to atmospheric moisture to form a durable, elastic seal. Engineered for demanding on-board environments, Sikaflex®-291 meets International Maritime Organization (IMO) requirements and is suitable for a wide range of sealing and light bonding tasks above and below deck.
Why Choose Sikaflex®-291
Excellent adhesion to common marine substrates
Good ageing & weathering resistance for long service life
Elastic to absorb vibration and movement
Low odour and non-corrosive
Overpaintable and sandable after cure*
Available colours: White, Grey, Black
*Always test paint compatibility. Paint elasticity is typically lower than sealant elasticity and can crack in the joint area.
Typical Uses
Multipurpose sealing and light bonding in marine construction, including elastic, vibration-resistant joints and interior sealing applications.
Suitable Substrates
Wood
Metals, metal primers and 2-component paint systems
Ceramic materials
Plastics such as GRP (fibreglass), etc.
Do Not Use On
Plastics prone to stress cracking (e.g. acrylic/Plexiglas®, polycarbonate)
Professional users only. Always test with actual substrates and site conditions to confirm adhesion and compatibility.
Technical Data (Typical)
Property
Method / Note
Value
Chemical base
—
1-component polyurethane
Cure mechanism
—
Moisture-curing
Colour
CQP001-1
White, Grey, Black
Density (uncured)
—
~1.3 kg/L (colour-dependent)
Non-sag properties
—
Good
Application temperature
Ambient
5 – 40 °C (optimum 15 – 25 °C)
Skin time
CQP019-1 (A)
~60 minutes
Open time
CQP526-1 (A)
~45 minutes
Curing speed
CQP049-1
Depends on temperature & humidity (see TDS)
Shrinkage
CQP014-1
~5 %
Shore A hardness
CQP023-1 / ISO 48-4
~40
Tensile strength
CQP036-1 / ISO 527
~1.8 MPa
Elongation at break
CQP036-1 / ISO 527
~500 %
Tear resistance
CQP045-1 / ISO 34
~6 N/mm
Service temperature (continuous)
CQP513-1
−50 to +90 °C
Service temperature (short-term)
CQP513-1
+160 °C (4 h), +180 °C (1 h)
Shelf life
(B)
12 months (store < 25 °C)
CQP = Corporate Quality Procedure. (A) 23 °C / 50 % r.h. (B) Storage below 25 °C.
Application Guidance
Surface Preparation
Substrates must be clean, dry, and free from grease, oil, and dust. Surface treatment depends on the substrate and is crucial for durability. Refer to the current Sika® Pre-treatment Chart for Marine Applications and verify with tests on original substrates.
Application
Process between 5 °C and 40 °C; reactivity and handling change with temperature and humidity.
Optimum substrate and product temperature is 15 – 25 °C.
Apply with hand, pneumatic, or electric piston guns, or suitable pump equipment.
Tooling & Finishing
Tool within the skin time.
Recommended finishing agent: Sika® Tooling Agent N (test any alternative agent for suitability).
Cleaning & Removal
Uncured material: remove from tools/equipment with Sika® Remover-208 or a suitable solvent.
Cured material: remove mechanically (e.g. knife, wire, abrasion).
Skin/hands: clean immediately with Sika® Cleaner-350H towels or an appropriate industrial hand cleaner and water. Do not use solvents on skin.
Overpainting
Best painted after skin formation; performance can be improved by treating the joint surface with Sika® Aktivator-100 or Sika® Aktivator-205 before painting.
If the paint requires baking > 80 °C, allow the sealant to fully cure first.
Always conduct preliminary trials under manufacturing conditions.
Avoid using enamel, alkyd, and chlorinated rubber paints on the joint area.
Compliance & Approvals
Meets requirements set out by the International Maritime Organization (IMO).
Associated with the marine “Wheelmark” conformity mark under the Marine Equipment Directive (MED) where applicable.
FAQs
Can Sikaflex®-291 be overpainted?
Yes, once cured and after preliminary testing for compatibility. Note that paint elasticity is usually lower than the sealant’s and may crack over the joint. Enamel, alkyd, and chlorinated rubber paints should not be used on the joint area.
What is a “marine grade” sealant/adhesive?
Sika’s marine range is designed for flexible, waterproof, and durable assemblies across vessels from small yachts to large ships, for maintenance and construction tasks above and below the waterline.
When and why should a primer be used?
Primers promote adhesion on certain substrates. Sika® Primer-210 is commonly used prior to applying 1-component polyurethanes like Sikaflex®-291. Always confirm with testing.
What does the Wheelmark indicate?
The Wheelmark symbolizes conformity with marine equipment standards under the EU Marine Equipment Directive (MED).
Which substrates does Sikaflex®-291 bond to?
Wood; metals, metal primers and 2-C paint systems; ceramics; and plastics such as GRP. Avoid plastics prone to stress cracking (e.g. acrylic/Plexiglas®, polycarbonate).
How do I remove Sikaflex®-291?
Uncured: Sika® Hand Wipes or Sika® Remover-208 for tools/surfaces. Cured: mechanical methods (knife, wire, abrasion). Remover-208 will not remove cured material.
Important: Information above is based on typical data. Performance depends on substrate, preparation, joint design, and application conditions. Conduct on-site tests to verify suitability. Always consult the latest Technical Data Sheet (TDS) and Safety Data Sheet (SDS).
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Sikaflex®-291 Marine Adhesive Sealant Multifunctional, IMO-Compliant
Sikaflex®-291 is a non-sag, 1-component polyurethane sealant developed for the marine market. It cures on exposure to atmospheric moisture to form a durable, elastic seal. Engineered for demanding on-board environments, Sikaflex®-291 meets International Maritime Organization (IMO) requirements and is suitable for a wide range of sealing and light bonding tasks above and below deck.
Why Choose Sikaflex®-291
Excellent adhesion to common marine substrates
Good ageing & weathering resistance for long service life
Elastic to absorb vibration and movement
Low odour and non-corrosive
Overpaintable and sandable after cure*
Available colours: White, Grey, Black
*Always test paint compatibility. Paint elasticity is typically lower than sealant elasticity and can crack in the joint area.
Typical Uses
Multipurpose sealing and light bonding in marine construction, including elastic, vibration-resistant joints and interior sealing applications.
Suitable Substrates
Wood
Metals, metal primers and 2-component paint systems
Ceramic materials
Plastics such as GRP (fibreglass), etc.
Do Not Use On
Plastics prone to stress cracking (e.g. acrylic/Plexiglas®, polycarbonate)
Professional users only. Always test with actual substrates and site conditions to confirm adhesion and compatibility.
Technical Data (Typical)
Property
Method / Note
Value
Chemical base
—
1-component polyurethane
Cure mechanism
—
Moisture-curing
Colour
CQP001-1
White, Grey, Black
Density (uncured)
—
~1.3 kg/L (colour-dependent)
Non-sag properties
—
Good
Application temperature
Ambient
5 – 40 °C (optimum 15 – 25 °C)
Skin time
CQP019-1 (A)
~60 minutes
Open time
CQP526-1 (A)
~45 minutes
Curing speed
CQP049-1
Depends on temperature & humidity (see TDS)
Shrinkage
CQP014-1
~5 %
Shore A hardness
CQP023-1 / ISO 48-4
~40
Tensile strength
CQP036-1 / ISO 527
~1.8 MPa
Elongation at break
CQP036-1 / ISO 527
~500 %
Tear resistance
CQP045-1 / ISO 34
~6 N/mm
Service temperature (continuous)
CQP513-1
−50 to +90 °C
Service temperature (short-term)
CQP513-1
+160 °C (4 h), +180 °C (1 h)
Shelf life
(B)
12 months (store < 25 °C)
CQP = Corporate Quality Procedure. (A) 23 °C / 50 % r.h. (B) Storage below 25 °C.
Application Guidance
Surface Preparation
Substrates must be clean, dry, and free from grease, oil, and dust. Surface treatment depends on the substrate and is crucial for durability. Refer to the current Sika® Pre-treatment Chart for Marine Applications and verify with tests on original substrates.
Application
Process between 5 °C and 40 °C; reactivity and handling change with temperature and humidity.
Optimum substrate and product temperature is 15 – 25 °C.
Apply with hand, pneumatic, or electric piston guns, or suitable pump equipment.
Tooling & Finishing
Tool within the skin time.
Recommended finishing agent: Sika® Tooling Agent N (test any alternative agent for suitability).
Cleaning & Removal
Uncured material: remove from tools/equipment with Sika® Remover-208 or a suitable solvent.
Cured material: remove mechanically (e.g. knife, wire, abrasion).
Skin/hands: clean immediately with Sika® Cleaner-350H towels or an appropriate industrial hand cleaner and water. Do not use solvents on skin.
Overpainting
Best painted after skin formation; performance can be improved by treating the joint surface with Sika® Aktivator-100 or Sika® Aktivator-205 before painting.
If the paint requires baking > 80 °C, allow the sealant to fully cure first.
Always conduct preliminary trials under manufacturing conditions.
Avoid using enamel, alkyd, and chlorinated rubber paints on the joint area.
Compliance & Approvals
Meets requirements set out by the International Maritime Organization (IMO).
Associated with the marine “Wheelmark” conformity mark under the Marine Equipment Directive (MED) where applicable.
FAQs
Can Sikaflex®-291 be overpainted?
Yes, once cured and after preliminary testing for compatibility. Note that paint elasticity is usually lower than the sealant’s and may crack over the joint. Enamel, alkyd, and chlorinated rubber paints should not be used on the joint area.
What is a “marine grade” sealant/adhesive?
Sika’s marine range is designed for flexible, waterproof, and durable assemblies across vessels from small yachts to large ships, for maintenance and construction tasks above and below the waterline.
When and why should a primer be used?
Primers promote adhesion on certain substrates. Sika® Primer-210 is commonly used prior to applying 1-component polyurethanes like Sikaflex®-291. Always confirm with testing.
What does the Wheelmark indicate?
The Wheelmark symbolizes conformity with marine equipment standards under the EU Marine Equipment Directive (MED).
Which substrates does Sikaflex®-291 bond to?
Wood; metals, metal primers and 2-C paint systems; ceramics; and plastics such as GRP. Avoid plastics prone to stress cracking (e.g. acrylic/Plexiglas®, polycarbonate).
How do I remove Sikaflex®-291?
Uncured: Sika® Hand Wipes or Sika® Remover-208 for tools/surfaces. Cured: mechanical methods (knife, wire, abrasion). Remover-208 will not remove cured material.
Important: Information above is based on typical data. Performance depends on substrate, preparation, joint design, and application conditions. Conduct on-site tests to verify suitability. Always consult the latest Technical Data Sheet (TDS) and Safety Data Sheet (SDS).
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Sikaflex® Pro+ - Solvent-Free, Highly Flexible Sealant & Adhesive
All new solvent-free, highly flexible, primer-less sealant and adhesive is the one-stop product for any tradesman and handyman's home building or renovation.
Sikaflex® Pro+ is a 1-component moisture curing polyurethane elastic sealant and adhesive that is formulated with Sika’s newly engineered i-Cure technology to provide higher performance, more movement capability, and improved bubble-free curing.
Sika’s new i-Cure technology is user and eco-friendly, with no solvents and a low environmental impact, while maintaining the performance of traditional polyurethane. It is suitable for overpainting with traditional paint coatings. The i-Cure® technology has an early initial set and overcomes bubbling in the sealant while curing, even in extreme conditions.
Sikaflex® Pro+ is a high-performance, interior and exterior elastic joint sealant with excellent water, weather, and ageing resistance. It has many uses, including:
Expansion joints in walls and cladding
Sealing around doors and window frames
Sealing penetrations in walls and floors for pipes
Sealing joints in concrete and masonry elements
Sealant for draught-proofing and general sealing and filling applications
Pro+ can be used on a multitude of applications and common building substrates. It has good adhesion to damp substrates. To name a few, Pro+ can be used on:
Aluminium
Steel
Powder-coated metals or glazed tiles
Concrete, aerated concrete, cement-based renders, mortars, and bricks
Application of Sikaflex® Pro+
Ensure all surfaces are structurally sound, clean, dry, and free from any grease, etc. (The surface can be damp but not wet. If uncertain, apply masking tape to test adhesion. If masking tape sticks to the surface, it's OK to proceed.)
Movement joints must have a minimum width and depth of 5mm. Apply a bond-breaker tape, or backing rod to the base of the joint to prevent 3-sided adhesion. To keep the work clean, apply masking tape to the top edge of the joint on each face.
Cut the nozzle to the required width and gun sealant into the joint. Avoid voids or air entrapment in the joint when applying.
Before the sealant has skinned, tool off with an appropriate spatula to give a smooth finish.
Remove the masking tape and clean up immediately.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Sikaflex® Pro+ - Solvent-Free, Highly Flexible Sealant & Adhesive
All new solvent-free, highly flexible, primer-less sealant and adhesive is the one-stop product for any tradesman and handyman's home building or renovation.
Sikaflex® Pro+ is a 1-component moisture curing polyurethane elastic sealant and adhesive that is formulated with Sika’s newly engineered i-Cure technology to provide higher performance, more movement capability, and improved bubble-free curing.
Sika’s new i-Cure technology is user and eco-friendly, with no solvents and a low environmental impact, while maintaining the performance of traditional polyurethane. It is suitable for overpainting with traditional paint coatings. The i-Cure® technology has an early initial set and overcomes bubbling in the sealant while curing, even in extreme conditions.
Sikaflex® Pro+ is a high-performance, interior and exterior elastic joint sealant with excellent water, weather, and ageing resistance. It has many uses, including:
Expansion joints in walls and cladding
Sealing around doors and window frames
Sealing penetrations in walls and floors for pipes
Sealing joints in concrete and masonry elements
Sealant for draught-proofing and general sealing and filling applications
Pro+ can be used on a multitude of applications and common building substrates. It has good adhesion to damp substrates. To name a few, Pro+ can be used on:
Aluminium
Steel
Powder-coated metals or glazed tiles
Concrete, aerated concrete, cement-based renders, mortars, and bricks
Application of Sikaflex® Pro+
Ensure all surfaces are structurally sound, clean, dry, and free from any grease, etc. (The surface can be damp but not wet. If uncertain, apply masking tape to test adhesion. If masking tape sticks to the surface, it's OK to proceed.)
Movement joints must have a minimum width and depth of 5mm. Apply a bond-breaker tape, or backing rod to the base of the joint to prevent 3-sided adhesion. To keep the work clean, apply masking tape to the top edge of the joint on each face.
Cut the nozzle to the required width and gun sealant into the joint. Avoid voids or air entrapment in the joint when applying.
Before the sealant has skinned, tool off with an appropriate spatula to give a smooth finish.
Remove the masking tape and clean up immediately.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
SikaSeal® Super-200 is great for sealing of connection joints with moderate movement
Good UV resistance
Low odour
For exterior and interior use
USE
Sealing of connection joints with moderate movement around windows, window sills, doors, PVC pipes, dry partition walls and ceiling
Filling of cracks on interior and exterior walls (with no permanent water immersion)
CHARACTERISTICS AND ADVANTAGES
For exterior and interior use
High movement capability ±12.5%
Good UV resistance
Solvent-free, low odour
Overpaintable
Very good adhesion on most construction materials such as concrete, plaster, wood
Possible storage at -10°C for short period of time (max 24h)
Conforms to EN 15651-1 F INT EXT
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
DESCRIPTION
SikaSeal® Acrylic 100 is a flexible, one component, water based acrylic joint sealant and gap filler where low demand of elongation are required, for interior use.
USES
SikaSeal® Acrylic 100 is suitable for sealing low movement joints around:
? brick
? Concrete
? Plasterboard
? Windows
? Doors
? Ceramic tiles
SikaSeal® Acrylic 100 fills cracks and adheres to:
? Glass
? Wood
? Aluminium
? Brick
? Concrete
? Plasterboard
? Ceramic
? Painted surfaces.
CHARACTERISTICS / ADVANTAGES
Excellent adhesion to most common construction materials.
Water clean-up of uncured sealant.
Can be sanded back once fully cured if required to give smooth surface finish.
Can be painted over using water based paints.
Non-toxic
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
SikaSeal® Roof & Gutter Silicone Sealant
Product Type: 1-component neutral cure roof and gutter silicone sealant
Product Overview
SikaSeal® Roof & Gutter is a versatile, one-component, neutral curing silicone sealant designed for use in roofing and guttering applications. This sealant offers excellent adhesion to a variety of construction materials and is ideal for sealing roofs, gutters, and plumbing fixtures, both for exterior and interior applications. It cures quickly and provides a flexible, waterproof seal with superior temperature resistance.
Key Features
Neutral cure, low odour formula
Excellent adhesion to common construction materials such as glass, metals, ceramics, tiles, plastics, concrete, and rubber
Fast curing with a non-sag formula for easy application
Interior and exterior use with a temperature resistance range of -40°C to +150°C
High movement capability (±25% for translucent, ±50% for coloured variants)
Waterproof seal for durable, long-lasting performance
Non-toxic and water-potable approved per AS/NZS 4020:2018
Applications
SikaSeal® Roof & Gutter is ideal for:
Roof and gutter sealing
Sealing polycarbonate roof sheeting
General sealing around plumbing fixtures and penetrations
Sealing interior and exterior joints
Specifications
Packaging
300ml cartridge
Shelf Life
12 months (if stored properly)
Colours Available
Translucent, Grey, White, Black
Density
Translucent: ~1.02 kg/l, Colours: ~1.39 kg/l
Shore A Hardness
Translucent: ~26, Colours: ~46
Elongation at Break
Translucent: ~250%, Colours: ~310%
Movement Capability
Translucent: ±25%, Colours: ±50%
Service Temperature
-40°C to +150°C
Application Instructions
Ensure the substrate is clean, dry, and free from oils, grease, dust, and other contaminants. For optimal adhesion, follow the recommended priming procedures based on the substrate type (non-porous or porous). Apply SikaSeal® Roof & Gutter using a sealant gun, ensuring full contact with the joint sides. Tool the sealant immediately after application for a smooth, durable finish.
Important Considerations
Do not apply on natural stone or bituminous substrates
Not recommended for use under water pressure or in permanent water immersion
Pre-test required on stressed polyacrylate and polycarbonate materials
May cause discoloration on light-colored silicone when exposed to UV radiation (this does not affect the product's performance)
Not suitable for use in confined spaces with no air circulation (requires atmospheric moisture to cure)
Packaging & Storage
Store in the original, unopened packaging in a dry location between +5°C and +25°C. Shelf life is 12 months from the production date under proper storage conditions.
Contact & Ordering
For more information or to place an order, contact us at admin@gluesaustralia.com.au
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Usage
Sikasil®-670 Fire is designed for fire rated movement and connection joints on porous and non-porous substrates.
Advantages
Up to 4 hours fire resistance according to AS 1530.4
Up to 4 hours fire resistance according to EN 1366-4
Very good resistance to weathering
Movement capability of ± 35% (ASTM C 719)
Easy to smooth and very good workability
Good adhesion to many different substrates
Neutral curing
Colour
Grey
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
SIKASIL® -670 FIRE | JOINT SEALANT
Fire-rated joint sealant
Up to 4 hours fire resistance according to EN 1366-4
Very good resistance to weathering
Easy to smooth and very good workability
DESCRIPTION
Sikasil®-670 Fire is a fire-rated, 1-component, moisture-curing, low-modulus elastic joint sealant.
USES
Sikasil®-670 Fire is designed for fire rated movement
and connection joints on porous and non-porous substrates.
CHARACTERISTICS / ADVANTAGES
▪ Up to 4 hours fire resistance according to EN 1366-4
▪ Very good resistance to weathering
▪ Movement capability of ± 35% (ASTM C 719)
▪ Easy to smooth and very good workability
▪ Good adhesion to many different substrates
▪ Neutral curing
ENVIRONMENTAL INFORMATION
▪ LEED® EQc 4.1
▪ SCAQMD, Rule 1168
▪ BAAQMD, Reg. 8, Rule 51
APPROVALS / STANDARDS
▪ EN 15651-1 F EXT-INT CC 25 LM
▪ EN 15651-4 PW INT
▪ ISO 11600 F 25 LM & G 25 LM
▪ ASTM C 920, class 35
▪ EN 1366-4 assessment report
▪ ETAG 026 assessment report
▪ EN 13501-2 classification report
▪ EN 140-3
▪ EN 13501-1 class B-s2-d0
PRODUCT INFORMATION
Chemical Base Neutral cure silicone
Colour: Grey
Storage Conditions Sikasil®-670 Fire shall be stored in dry conditions, where it is protected from direct sunlight and at temperatures between +5 °C and +25 °C.
Density 1.35 kg/l approx. (ISO 1183-1)
TECHNICAL INFORMATION
Shore A Hardness 16 approx. (after 28 days) (ISO 868)
Secant Tensile Modulus 0.30 N/mm2 approx. at 100% elongation (23 °C) (ISO 8339)
0.50 N/mm2 approx. at 100% elongation (−20 °C)
Elongation at Break 650% approx. (ISO 37)
Elastic Recovery 70% approx. (ISO 7389)
Tear Propagation Resistance 4.0 N/mm approx. (ISO 34)
Movement Capability ±25% (ISO 9047) ±35% (ASTM C 719)
Service Temperature −40 °C to +150 °C
Joint Design The joint width must be designed to suit the joint movement required and the movement capability of the sealant. The joint width shall be ≥ 10 mm and ≤ 40 mm. The joint depth shall be ≤ 20 mm. A width to depth ratio of 2:1 must be maintained (for exceptions, see table below).
Backing Material Use polyethylene foam backing rods.
Sag Flow 2 mm approx. (20 mm profile, 50 °C) (ISO 7390)
Ambient Air Temperature +5 °C to +40 °C, min. 3 °C above dew point temperature
Substrate Temperature +5 °C to +40 °C
Curing Rate 2 mm/24 hours approx. (23 °C / 50% r.h.) (CQP 049-2)
Skin Time 25 minutes approx. (23 °C / 50% r.h.) (CQP 019-1)
Tooling Time 20 minutes approx. (23 °C / 50% r.h.) (CQP 019-2)
APPLICATION INSTRUCTIONS
SUBSTRATE PREPARATION
The substrate must be clean, dry, sound and homogeneous, free from oils, grease, dust and loose or friable particles. Sikasil®-670 Fire adheres without
primers and/or activators
APPLICATION METHOD / TOOLS
Sikasil®-670 Fire is supplied ready to use.
After the necessary substrate preparation, insert a suitable backing rod to the required depth and apply any primer if necessary. Insert a foil pack or cartridge into the sealant gun and extrude Sikasil®-670 Fire into the joint making sure that it comes into full contact with the sides of the joint and avoids any air entrapment. Sikasil®-670 Fire sealant must be firmly tooled against the joint sides to ensure adequate adhesion. It is recommended to use masking tape where exact joint lines or neat lines are required. Remove the tape within the skin time. Do not use tooling products containing solvents.
CLEANING OF TOOLS
Clean all tools and application equipment immediately after use with Sika® Remover-208 and/or Sika® TopClean T. Once cured, residual material can only be removed mechanically.
FURTHER DOCUMENTS
▪ Safety Data Sheet (SDS)
▪ EN 13501-2 classification report
▪ ETAG 026 assessment report
▪ Brochure Sika Fire Protection Solutions
LIMITATIONS
▪ Sikasil®-670 Fire cannot be overpainted.
Colour variations may occur due to exposure to chemicals, high temperatures and/or UV-radiation (especially with the colour shade white). However, a change in colour is purely of aesthetic nature and does not adversely influence the technical performance or durability of the product.
▪ Do not use Sikasil®-670 Fire on natural stone.
Do not use Sikasil®-670 Fire on bituminous substrates, natural rubber, EPDM rubber or on any building materials which might bleed oils, plasticizers or solvents that could attack the sealant.
▪ Do not use Sikasil®-670 Fire to seal joints in and around swimming pools.
▪ Do not use Sikasil®-670 Fire for joints under water pressure or for permanent water immersion.
▪ Do not expose uncured Sikasil®-670 Fire to alcohol-containing products as this may interfere with the curing reaction.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
SikaTitan®
258 is a primerless to windscreen, one-component direct glazing adhesive. It is easy to apply and has a paste-like consistency. On exposure to atmospheric moisture it cures to a durable elastomer. SikaTitan® -258 provides a long tack-free time and ensures a safe application even under warm conditions. Note: Primerless application requires the glass to be prepared with a non-antistatic glass cleaner.
Also the bonding surfaces must be free of contamination prior to the application of the adhesive. SikaTitan® -258 is manufactured in accordance with ISO 9001 / 14001 quality assurance system and with the responsible care program.
Product Benefits
- Primerless to glass
- One-component formulation
- Cold application
- Good application properties such as bead stability / good non-sag properties
- Short cut-off string
- Tested according to FMVSS 212/208 (with double-side airbags, no seatbelts)
Areas of Application
SikaTitan® -258 is suitable for direct-glazing applications in the Automotive Glass Replacement business. With its good performance and application properties it is suitable for mobile as well as inhouse installations.This product is to be used by professional experienced fitters only. If this product is used for other applications than Automotive Glass Replacement, trials must be carried out prior to use.
Technical Product Data
Chemical base 1-C polyurethane
Colour (CQP1) 001-1) Black
Cure mechanism Moisture-curing
Density (uncured) (CQP 006-4) 1.1 kg/l approx.
Non-sag properties (CQP 061-1) Good
Application temperature +5 to +40°C Skin time2)
(CQP 019-1) 40min. approx.
Open time2)
(CQP 526-1) 30min. approx.
Curing speed(CQP 049-1)
Shore A hardness (CQP 023-1 / ISO 868) 51 approx.
Tensile strength (CQP 036-1 / ISO 37) 5 MPa approx.
Elongation at break (CQP 036-1 / ISO 37) 650% approx.
Tensile lap-shear strength (CQP 046-1 / ISO 4587) 2.5 MPa approx.
Safe Drive-Away Time2)
(cars) with double side airbag
according to FMVSS 212 / 208 (CQP 511-1) without airbag
6 hours
2 hours
Chemical Resistance
SikaTitan® -258 is resistant to fresh water, seawater, limewater, sewage effluent, diluted acids and caustic solutions; temporarily resistant to fuels, mineral oils, vegetable and animal fats and oils; not resistant to organic acids and caustic solutions or solvents.
Method of Application
Removal of old glass
Remove damaged glass in accordance with the vehicle manufacturer’s instructions.
Surface preparation
Surfaces must be clean, dry and free from dust and grease. The bond faces must be prepared with a non-antistatic glass cleaner.
Bonding surface must be free of contaminants before application of the product. Windshields without ceramic coatings need additional UV protection.
Application
Cut off the tip of the nozzle in accordance with the vehicle manufacturer's recommendations and screw onto the cartridge. It is recommended to apply the adhesive with a piston-type application gun. To ensure a uniform thickness of adhesive bead, we recommend that the adhesive be applied in the form of a triangular bead (see fig. 1 below).
The substrate temperature must be between 5°C and 35°C.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
SikaSeal®-401 Aquarium
Premium one-component aquatic life safe silicone sealant
SikaSeal® 401 Aquarium is a premium one-component room temperature vulcanising (RTV) silicone rubber that is safe for aquatic life and designed for sealing applications in aquariums, ponds and water pumps. It adheres very well to glass and aluminium, is UV resistant and has excellent gap filling properties.
Extreme temperature resistance (-50°c to +250°c)
Excellent vibration, UV and weathering resistance
Good gap filling properties
Usage
Fish tanks
Water pumps
Aluminium
Glass
Advantages
Extreme temperature resistance (-50°c to +250°c)
Excellent vibration, UV and weathering resistance
Good gap filling properties
Highly versatile
Easy to apply
Aquarium safe
Composition
1-C Silicone (acetoxy)
Shelf life
18 months from date of production if in undamaged and unopened original sealed containers and stored according to the storage conditions.
Storage conditions
Must be stored in dry conditions and protected from direct sunlight at temperatures between +10ºC and +25ºC.
Density
~1.02 kg/l
Application
Application steps
SUBSTRATE PREPARATION
Ensure all surfaces are clean, dry and free from dust, grease and loose material. Remove all old gasket material from mating surfaces before cleaning with a residue free solvent and allow to completely dry.
CLEANING OF EQUIPMENT
Uncured, excess SikaSeal® 401 Aquarium may be removed with Sika® Remover- 208 or another suitable solvent. Once cured, the excess sealant can be trimmed away from the edges with a knife.
PRODUCT INFORMATION
Composition 1-C Silicone (acetoxy)
Packaging 75g Tube, 12 Tube per box
Colour Clear
Shelf life 18 months from date of production if in undamaged and unopened original sealed containers and stored according to the storage conditions.
Storage conditions Must be stored in dry conditions and protected from direct sunlight at
temperatures between +10ºC and +25ºC.
Density ~1.02 kg/l
Shore A Hardness ~23
Tensile Strength 1.0 N/mm2
Secant Tensile Modulus 1.1 n/mm2
Elongation at Break ~500%
Ambient Air Temperature +5°c to +45°c
Curing Rate ~3mm per 24 hours
Skinning time ~7-10 minutes
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
SikaBond is a high strength contact adhesive that will not slump on vertical surfaces. It can be used as a one way liquid adhesive, or a two way contact adhesive, on a variety of surfaces.
Uses SikaBond can be used on most substrates due to its excellent adhesion.
These include:
Floor and wall panels.
Wood, plasterboard and chipboard.
Aluminium, iron and steel.
Concrete, cement sheeting and masonry.
Advantages
One component ready to use.
Fast drying time.
Easy to use.
High adhesion strength.
Non-slump.
Storage and Shelf Life
Stored in the original sealed packaging at temperatures of between 5ºC and 35ºC, this material will keep for at least twelve (12) months.
Instructions for Use
Surface Preparation All surfaces must be clean, sound, dry and free of oil, grease and surface contamination. Thoroughly remove all loose particles and dust. Any loose flaking must be removed and light sanding is recommended.
Application
One Way Method:
This method is recommended for heavier panels or where load or stress is expected. Apply a 4 to 6mm bead of SikaBond using a cartridge gun, making sure the beads are no more than 45cm apart. Bring both substrates immediately together and clamp, nail or screw for a minimum of 24 hours. For butt joints use adhesive on both panel edges.
Two Way Method:
Apply adhesive as in one way method, bring together substrates, and press firmly over entire surface to transfer adhesive. Then pull apart. Allow adhesive to tack off for 3 to 5 minutes depending on weather conditions, reposition the objects and press together firmly. The surfaces should be tapped together with a hammer and a padded block to ensure maximum contact. Maximum bond strength will be achieved in 12 to 72 hours, depending on substrates and weather. Heavy panels may require temporary mechanical fastening until maximum strength is achieved.
In Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Instant set, high viscosity, multipurpose super glue
Suitable for bonding substrates with irregular surfaces and in vertical applications
Super high strength bond to most plastics, rubber, timber, ceramics, paper, card, leather and metals
Controlled dosage applicator nozzle
Use:
As an instant setting adhesive for small bonding jobs such as bonding most metals, plastics, rubber, fabrics, wood, paper and other materials
Can be used on porous substrates such as porcelain and china
Small repairs to glasses, bonded shoe soles, picture frames, ceramics, toys and small electronic equipment, etc.
Surfaces with small irregularities max. 0.5 mm
On vertical surfaces
Characteristics and Advantages
One Component
Easy to apply, non-sag, gel consistency
Very rapid, tenacious bond to numerous substrates, e.g., plastics, rubber, metals, wood, ceramics, paper, card
Low consumption adhesive
Versatile, allows adhesion between different materials
Colourless
Durable
Packaging
3 g Tube
![Sika Sikaflex 118 Extreme Grab 290ml [White]](//gluesaustralia.com.au/cdn/shop/files/7612895530055_35bcc6bf-bbee-4219-b850-30fa7a6b83ac.png?v=1754711711&width=645)
![Sika Sikaflex 221 Heavy Duty Adhesive Sealant 310ml [Black]](//gluesaustralia.com.au/cdn/shop/files/4520524003395_211a040d-fd65-46e4-b320-62196c5157c2.png?v=1754711709&width=645)
![Sika Sikaflex 221 Heavy Duty Adhesive Sealant 310ml [White]](//gluesaustralia.com.au/cdn/shop/files/4520524003593_20527af7-fe08-426c-ab91-1e7cb16de683.png?v=1754711708&width=645)
![Sika Sikaflex 252 High Strength Structural Adhesive Sealant [Black]](//gluesaustralia.com.au/cdn/shop/files/7612895456188_c10ea96d-b0be-41ba-a0ee-9656fab35b16.jpg?v=1754711652&width=645)
![Sika Sikaflex 252 High Strength structural Adhesive Sealant [White]](//gluesaustralia.com.au/cdn/shop/files/7612895456164_5c293f0a-df90-415e-875b-0ed963018cfa.jpg?v=1754711706&width=645)
![Sika Sikaflex 291 Marine Adhesive Sealant [Black]](//gluesaustralia.com.au/cdn/shop/files/45205240096_bb4dfb0d-a336-4739-9b91-9ca89764b874.jpg?v=1754711704&width=645)
![Sika Sikaflex 291 Marine Adhesive Sealant [White]](//gluesaustralia.com.au/cdn/shop/files/45205240096_bb9d6399-3f9c-4c6e-aeb9-97604f6829a6.jpg?v=1754711703&width=645)
![Sika Sikaflex Pro+ Sealant 310ml [White]](//gluesaustralia.com.au/cdn/shop/files/4520524025.jpg?v=1754724135&width=645)
![Sika Sikaflex Pro+ Sealant For Concrete and Masonry Facades 600ml [White]](//gluesaustralia.com.au/cdn/shop/files/45205240085.jpg?v=1754724137&width=645)
![Sika SikaSeal 300 Glass & Weather Seal [Transparent]](//gluesaustralia.com.au/cdn/shop/files/9318324011314_17b1b8c7-fa52-428b-bf6f-872b3b964d3b.png?v=1754711699&width=645)
![Sika SikaSeal Flexible Gap Filler Super-200 Paintable [Transparent]](//gluesaustralia.com.au/cdn/shop/files/9318324010690_a135bef3-1e63-49fe-b52d-552f6c48153c.png?v=1754711651&width=645)
![Sika SikaSeal Gap Filler Acrylic 100 Sandable Paintable [White]](//gluesaustralia.com.au/cdn/shop/files/9318324010676_f8ac62bc-ef55-4a57-a739-47528a1aae8c.jpg?v=1754711697&width=645)
![Sika SikaSeal Roof & Gutter Silicone Sealant [Black]](//gluesaustralia.com.au/cdn/shop/files/9318324010461.png?v=1754724138&width=645)
![Sika SikaSeal Roof & Gutter Silicone Sealant [Grey]](//gluesaustralia.com.au/cdn/shop/files/9318324010454.png?v=1754724138&width=645)
![Sika SikaSil 670 Fire Rated Silicone Sealant [Grey]](//gluesaustralia.com.au/cdn/shop/files/9318324012236_d7a5d83c-0ea4-4a46-88bb-55e873bf5a05.jpg?v=1754711696&width=645)
![Sika Sikasil 670 Fire Resistant Silicone Sealant [Grey]](//gluesaustralia.com.au/cdn/shop/files/7612895181462_fe2d5a8d-2a66-433f-9d24-2dfa9adec11a.jpg?v=1754711694&width=645)
![Sika Sikasil Pool Silicone Water Resistance [Transparent]](//gluesaustralia.com.au/cdn/shop/files/76128946_314287d6-23cc-4ab5-90d4-1c020429de31.png?v=1754711691&width=645)
![Sika Sikaflex 118 Extreme Grab 290ml [White]](http://gluesaustralia.com.au/cdn/shop/files/7612895530055_35bcc6bf-bbee-4219-b850-30fa7a6b83ac.png?v=1754711711&width=645)
![Sika Sikaflex 221 Heavy Duty Adhesive Sealant 310ml [Black]](http://gluesaustralia.com.au/cdn/shop/files/4520524003395_211a040d-fd65-46e4-b320-62196c5157c2.png?v=1754711709&width=645)
![Sika Sikaflex 221 Heavy Duty Adhesive Sealant 310ml [White]](http://gluesaustralia.com.au/cdn/shop/files/4520524003593_20527af7-fe08-426c-ab91-1e7cb16de683.png?v=1754711708&width=645)
![Sika Sikaflex 252 High Strength Structural Adhesive Sealant [Black]](http://gluesaustralia.com.au/cdn/shop/files/7612895456188_c10ea96d-b0be-41ba-a0ee-9656fab35b16.jpg?v=1754711652&width=645)
![Sika Sikaflex 252 High Strength structural Adhesive Sealant [White]](http://gluesaustralia.com.au/cdn/shop/files/7612895456164_5c293f0a-df90-415e-875b-0ed963018cfa.jpg?v=1754711706&width=645)
![Sika Sikaflex 291 Marine Adhesive Sealant [Black]](http://gluesaustralia.com.au/cdn/shop/files/45205240096_bb4dfb0d-a336-4739-9b91-9ca89764b874.jpg?v=1754711704&width=645)
![Sika Sikaflex 291 Marine Adhesive Sealant [White]](http://gluesaustralia.com.au/cdn/shop/files/45205240096_bb9d6399-3f9c-4c6e-aeb9-97604f6829a6.jpg?v=1754711703&width=645)
![Sika Sikaflex Pro+ Sealant 310ml [White]](http://gluesaustralia.com.au/cdn/shop/files/4520524025.jpg?v=1754724135&width=645)
![Sika Sikaflex Pro+ Sealant For Concrete and Masonry Facades 600ml [White]](http://gluesaustralia.com.au/cdn/shop/files/45205240085.jpg?v=1754724137&width=645)
![Sika SikaSeal 300 Glass & Weather Seal [Transparent]](http://gluesaustralia.com.au/cdn/shop/files/9318324011314_17b1b8c7-fa52-428b-bf6f-872b3b964d3b.png?v=1754711699&width=645)
![Sika SikaSeal Flexible Gap Filler Super-200 Paintable [Transparent]](http://gluesaustralia.com.au/cdn/shop/files/9318324010690_a135bef3-1e63-49fe-b52d-552f6c48153c.png?v=1754711651&width=645)
![Sika SikaSeal Gap Filler Acrylic 100 Sandable Paintable [White]](http://gluesaustralia.com.au/cdn/shop/files/9318324010676_f8ac62bc-ef55-4a57-a739-47528a1aae8c.jpg?v=1754711697&width=645)
![Sika SikaSeal Roof & Gutter Silicone Sealant [Black]](http://gluesaustralia.com.au/cdn/shop/files/9318324010461.png?v=1754724138&width=645)
![Sika SikaSeal Roof & Gutter Silicone Sealant [Grey]](http://gluesaustralia.com.au/cdn/shop/files/9318324010454.png?v=1754724138&width=645)
![Sika SikaSil 670 Fire Rated Silicone Sealant [Grey]](http://gluesaustralia.com.au/cdn/shop/files/9318324012236_d7a5d83c-0ea4-4a46-88bb-55e873bf5a05.jpg?v=1754711696&width=645)
![Sika Sikasil 670 Fire Resistant Silicone Sealant [Grey]](http://gluesaustralia.com.au/cdn/shop/files/7612895181462_fe2d5a8d-2a66-433f-9d24-2dfa9adec11a.jpg?v=1754711694&width=645)
![Sika Sikasil Pool Silicone Water Resistance [Transparent]](http://gluesaustralia.com.au/cdn/shop/files/76128946_314287d6-23cc-4ab5-90d4-1c020429de31.png?v=1754711691&width=645)
