In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
The Premium Wet Area Sealant
Wet areas
Baths, showers, toilets
Easy to use
Contains strong fungicides to fight mould
Maxisil A Ceramic Silicone is an acetic cure silicone recommended for all ceramic tile areas, especially for expansion joints in bathrooms, kitchens, and flooring sectors.
Built-in fungicides for mould resistance
For both exterior and interior use
Excellent weatherability, resistant to ageing and UV radiation
Resistant to chemicals and temperature
Primerless adhesion to clean, dry surfaces such as ceramics, glass, acrylics, aluminium, and painted wood
Very good tooling and smoothing properties
Time-saving with an easy cleanup system
Please note that colour samples are not true to the actual colour. This is a guide only.
Characteristics
1-component acetate-curing silicone sealant
Excellent weathering, ageing, and UV resistance
Enables a great finish, will not string during application
Good tooling and smoothing properties
Contains fungicides
Medium skin formation time for easy handling
Very good adhesion on ceramic substrates
Primerless adhesion to many substrates
Stress expansion modulus at 100% (DIN 53 504, S3A): 0.3 N/mm²
Meets DIN 18545, part 2D (German industrial standard)
Available in a variety of colours (custom colours available upon request)
Fields of Application
Sealing connection joints between ceramic tiles, showers, baths, and flooring sections
Expansion/movement joints in bathrooms and wet areas
Connection joints on door and window frames
Sealing double-glazing joints
Glass block glazing
Sealing general building substrates
Suitable for interior and exterior use
Important Information
Before application, ensure materials in the contact area are compatible with the sealant and with each other to prevent damage or discoloration. If in doubt, consult the manufacturers of surrounding substrates.
While curing, small amounts of acetic acid are released — ensure good ventilation
After curing, the product is odourless and harmless
Thicker silicone layers require longer vulcanisation time
Not for full-surface bonding unless construction prerequisites are met
For layers over 15mm, contact our technical department
Avoid contact with bitumen-containing materials or those releasing solvents (e.g. butyl, EPDM, neoprene, bituminous paints)
When replacing mould-contaminated joints, remove all old sealant and treat areas with Maxisil Anti-Mildew Spray
Technical Properties
Skin-forming time (23°C / 50% RAH)
~ 15 min
Curing in 24h (23°C / 50% RAH)
~ 2–3 mm
Processing temperature
+5°C to +35°C
Viscosity (23°C)
Pasty, stable
Density (23°C, ISO 1183-1)
~ 1.0 g/cm³
Shore A hardness (ISO 868)
~ 20
Permissible movement capability
—
Out Of Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
This is a two-part, smooth, dark grey paste that cures to form a hard, durable polymer that is extremely thermally conductive, yet electrically insulating. It is it very viscous because it is highly filled with thermally conductive ceramic powders for maximum thermal conductivity. It bonds well to metals, ceramics, glass, and most plastics used in electronic assemblies.
It has a convenient 1-to-1 mix ratio and a 4-hour working life. The mixed adhesive can essentially act like a one-part adhesive for the duration of a work shift. Unlike one-part adhesives, it does not require high curing temperatures or frozen storage, and it has a very long shelf life.
This product comes packaged in separate 3 mL graduated syringes that can be accurately dispensed
Applications & Usages
This product is designed to bond heat sinks, LED’s, and other heat generating components in electronic assemblies. It is suitable for manufacturing, repair, and hobbyist sectors. Use it when a thixotropic adhesive paste with maximum thermal conductivity and a very long working life is required. For automatic dispensing applications, use the 8329TFS, which has a lower viscosity at the cost of slightly lower thermal conductivity.
Benefits and Features
• Thermal conductivity: 1.44 W/(m·K)
• 1:1 mix ratio by volume
• Working life: 4 hours
• Cure time 1 hour at 80°C or 96 hours at room temperature
• Room temperature storage
• Good adhesive strength
• Strong resistance to water, brine, acids, bases, and aliphatic hydrocarbons
Usage Parameters
Properties Value
Working Life a) 4 h
Full Cure @25 °C [77 °F] 96 h
Full Cure @80 °C [176 °F] 1 h
Properties Value
Constant Service -65 to 165 °C
Temperature [-85 to 329 °F]
Intermittent Temp. -70 to 200 °C
Limits b)
[-40 to 302 °F]
Storage Temperature 22 to 27 °C
of Unmixed Parts [72 to 81 °F]
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
The Monarch Mini Skeleton caulking gun is a smaller size caulking gun matched to the range of Monarch Mini sealant cartridges. This compact design provides easier access to tight spaces where conventional size guns find it difficult. Featuring an inbuilt cartridge opener, the mini caulking gun can open a cartridge safely without using a knife for quick & easy use.
FEATURES
Small, lightweight design
Inbuilt cartridge opener
Dripless
BENEFITS
Lightweight
Swivel head for easy storage
Comfortable design
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Monarch Mini Easy Nails Beige: The Compact, Quick-Grip Construction Adhesive
Features & Benefits
Fast grab for immediate adhesion
High bond strength secures various building materials
No sag, minimal vertical slip
Easy water clean-up
Suitable for timber, metal, ceramics, and masonry
Why Choose Monarch Mini Easy Nails Beige?
When it comes to small construction projects, Monarch Mini Easy Nails in Beige offers the perfect solution. Its compact design allows for easy application in tight spaces, especially when used with a Monarch Mini Compact Caulking Gun. Not only does it provide a strong bond, but it also allows for quick water clean-up, making it an essential choice for any DIY or professional project.
Out Of Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Monarch Mini Fill Sand Go™
MONARCH MINI® FILL SAND GO™ is an all in one solution to almost every DIY filling repair job. It’s a quick-dry, ready mixed, water-based formula that is suitable for small to medium cracks and holes in plasterboard & timber surfaces.
The innovative MONARCH MINI® FILL SAND GO™ is a 3 in 1 product solution that includes a filling blade applicator as well as an ingenious sanding tool with a reversible sanding sponge. This allows you to complete the filling repair from start to finish without the hassle of requiring extra tools.
FEATURES
Innovative 3 in 1 Solution
Filler, Applicator & Sanding Puck with Sponge All included
Suitable for Interior repairs on Plasterboard & Timber
BENEFITS
Quick Dry Formula
Ready to Use Multi-Purpose Filler
Paintable
Sandable
Low Shrinkage
UV Resistant
Low Odour
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Monarch Mini Roof & Gutter Clear Silicone: The Compact Caulking Solution
Product Overview
Designed for roofing and outdoor applications, the Monarch Mini is perfect for a variety of materials like metal, brick, galvanized iron, tiles, and aluminium.
Key Features & Benefits
Quick exposure to light running water
UV resistant for lasting outdoor use
Neutral cure, making it versatile and safe for different materials
Non-corrosive and AS 4020 approved
Compatible with Monarch Mini Compact Caulking Gun
Perfect For
Great for small projects where a full-size cartridge is not needed. Ideal for:
Repairing gutters
Fixing roofs
Mending downpipes
Tight spaces that traditional cartridges can't reach
Colors Available
Available in black and translucent versions for versatility in your projects.
How To Use
Best when used with a Monarch Mini Compact Caulking Gun to reach tight spaces. Always follow the safety guidelines as provided on the product label.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Monarch Mini Roof & Gutter Silicone is a neutral cure silicone sealant that is ideal for repairing or installing gutters, roofs, downpipes, skylights and more. It can also be used to install metal sheets in the roofing industry and various other building services.
With such versatility on offer it's no wonder this product's demand has soared so rapidly! What else would you want from your sealant? Well there are added features like its flexibility and resilience that make it perfect for all applications. You can count on Monarch Mini Roof & Gutter Silicone to stick around because of its long-lasting durability - don't wait until disaster strikes again when you could have had the protection you needed beforehand.
FEATURES
Premium quality 100% silicone
Non-corrosive
Neutral cure
AS 4020 approved
BENEFITS
Quick exposure to light running water
Suitable for use in all weather
UV resistant
Monarch Mini™ is an innovative range of sealants, fillers, adhesives and accessories for the sealant market. This range of products brings a much easier way to apply sealants or adhesives compared with using traditional products.
The Monarch Mini’s unique and compact sealant cartridge features a shorter length and a smaller diameter, making it easier to control and apply. Reaching into tight spaces where conventional caulking guns can’t, Monarch Mini’s lightweight and superior handling make it more practical and easy to use.
In addition to the Monarch Mini cartridge range are nozzles and caulking guns, which capitalise on the shorter cartridge and increase the places where it can be used. Filled with only premium quality materials, the Monarch Mini™ range is suited to both the DIY market and sections of the trade market, making Monarch Mini a very versatile option.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Monarch Mini Silicone is the sealant for your home. Especially useful in kitchens, bathrooms and laundries where sinks, baths, vanities and showers are installed and other outdoor patio areas, this durable polymer creates a waterproof barrier that'll stand up to wear-and-tear while resisting heat or cold when conditions change outside. A versatile property for any project you're working on!
Monarch Mini Silicone sealant is ideal for kitchens, bathrooms and laundries, where sinks, baths, vanities & showers are installed & for other outdoor uses. Available in a variety of colours.
FEATURES
Premium quality 100% silicone
Ideal for wet areas
Indoor and outdoor use
Maximum flexibility
BENEFITS
Proven to last in all weather
Mould resistant
Tack free in 10 minutes
Monarch Mini™ is an innovative range of sealants, fillers, adhesives and accessories for the sealant market. This range of products brings a much easier way to apply sealants or adhesives compared with using traditional products.
The Monarch Mini’s unique and compact sealant cartridge features a shorter length and a smaller diameter, making it easier to control and apply. Reaching into tight spaces where conventional caulking guns can’t, Monarch Mini’s lightweight and superior handling make it more practical and easy to use.
In addition to the Monarch Mini cartridge range are nozzles and caulking guns, which capitalise on the shorter cartridge and increase the places where it can be used. Filled with only premium quality materials, the Monarch Mini™ range is suited to both the DIY market and sections of the trade market, making Monarch Mini a very versatile option.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Monarch Mini Silicone is the sealant for your home. Especially useful in kitchens, bathrooms and laundries where sinks, baths, vanities and showers are installed and other outdoor patio areas, this durable polymer creates a waterproof barrier that'll stand up to wear-and-tear while resisting heat or cold when conditions change outside. A versatile property for any project you're working on!
Monarch Mini Silicone sealant is ideal for kitchens, bathrooms and laundries, where sinks, baths, vanities & showers are installed & for other outdoor uses. Available in a variety of colours.
FEATURES
Premium quality 100% silicone
Ideal for wet areas
Indoor and outdoor use
Maximum flexibility
BENEFITS
Proven to last in all weather
Mould resistant
Tack free in 10 minutes
Monarch Mini™ is an innovative range of sealants, fillers, adhesives and accessories for the sealant market. This range of products brings a much easier way to apply sealants or adhesives compared with using traditional products.
The Monarch Mini’s unique and compact sealant cartridge features a shorter length and a smaller diameter, making it easier to control and apply. Reaching into tight spaces where conventional caulking guns can’t, Monarch Mini’s lightweight and superior handling make it more practical and easy to use.
In addition to the Monarch Mini cartridge range are nozzles and caulking guns, which capitalise on the shorter cartridge and increase the places where it can be used. Filled with only premium quality materials, the Monarch Mini™ range is suited to both the DIY market and sections of the trade market, making Monarch Mini a very versatile option.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
The Monarch Mini Skeleton caulking gun is a smaller size caulking gun matched to the range of Monarch Mini sealant cartridges. This compact design provides easier access to tight spaces where conventional size guns find difficult. Featuring an inbuilt cartridge opener, the mini caulking gun can open a cartridge safely without using a knife for quick & easy use.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Nordsjö Professional Flexible Wood Filler repairs small cracks and holes in wood. As the name implies, it is a flexible filling for wood, great for interior and exterior use.
Suitable for all types of interior & exterior wood
Quick drying, easy to sand
Water resistant finish will not shrink, crack or crumble
Stainable and paintable
Properties
Ready for use
Excellent adhesion to all types of wood
Tough and durable fill that flexes with the natural movement of wood
Accepts nails and screws
Sandable and paintable after approx. 3 hours (1 cm layer at 20°C)
Must be overcoated when used outside (minimum 2 coats)
Paintable with all types of paint
Maximum layer thickness: 1 cm
Maximum depth: 2 cm
Colour: natural/pine
How to apply
Substrate must be clean, dry, dust and grease free.
Remove all loose material.
Mix the product well before use.
Product can be applied directly from the pot.
Apply filler firmly into the hole with a filling knife.
For a smooth result, finish with a damp filling knife.
For deeper repairs, build up in layers of 1cm, letting the product dry in between layers.
Once dry, sand the filler so it is even with the surface and dust off. Finish with a stain, varnish or paint. The filler may stain or varnish differently to the surrounding wood.
Clean tools with warm water.
Do not store or use below 5°C.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Nordsjö Professional Flexible Wood Filler repairs small cracks and holes in wood. As the name implies, it is a flexible filling for wood, great for interior and exterior use.
Suitable for all types of interior & exterior wood
Quick drying, easy to sand
Water resistant finish will not shrink, crack or crumble
Stainable and paintable
Properties
Ready for use
Excellent adhesion to all types of wood
Tough and durable fill that flexes with the natural movement of wood
Accepts nails and screws
Sandable and paintable after approx. 3 hours (1 cm layer at 20°C)
Must be overcoated when used outside (minimum 2 coats)
Paintable with all types of paint
Maximum layer thickness: 1 cm
Maximum depth: 2 cm
Colour: natural/pine
How to apply
Substrate must be clean, dry, dust and grease free.
Remove all loose material.
Mix the product well before use.
Product can be applied directly from the pot.
Apply filler firmly into the hole with a filling knife.
For a smooth result, finish with a damp filling knife.
For deeper repairs, build up in layers of 1cm, letting the product dry in between layers.
Once dry, sand the filler so it is even with the surface and dust off. Finish with a stain, varnish or paint. The filler may stain or varnish differently to the surrounding wood.
Clean tools with warm water.
Do not store or use below 5°C.
Out Of Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Nordsjö Professional Rapid Repair Filler quickly fills small cracks and holes, such as drill and nail holes. It adheres perfectly to stone, concrete, drywall, plaster and stucco.
For filling and repairing small cracks and holes, such as drill holes and nails
Excellent adhesion to plasterboard, wood, brick, concrete, fiber cement, drywall, plaster and render
Not for use on metal, plastic, PVC and damp surfaces
Suitable for interior & exterior use
Tools Needed
Sharp Knife
Fine Sandpaper
Properties
Ready to use
Rapid dry: sand and paint after 15 minutes (5 mm layer at 20°C) with all types of paint
Easy to sand
Will not shrink
Accepts nails and screws
Maximum layer thickness: 5 mm
Maximum depth: 5 mm
Must be painted over when used outside (minimum 2 coats)
Colour: White
How to apply
Substrate must be clean, dry, dust and grease free.
Remove all loose materials.
Mix the product well before use.
Press filler into crack with a filling knife, smoothing off with a wet filling knife.
For deeper repairs, build up in layers of 5 mm, letting the product dry in between layers.
Remove any excess filler and leave to dry.
Once dry sand lightly if required.
Clean tools and hands with warm water immediately after use.
Do not store or use below 5°C.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Nordsjö Professional Rapid Repair Filler quickly fills small cracks and holes, such as drill and nail holes. It adheres perfectly to stone, concrete, drywall, plaster and stucco.
For filling and repairing small cracks and holes, such as drill holes and nails
Excellent adhesion to plasterboard, wood, brick, concrete, fiber cement, drywall, plaster and render
Not for use on metal, plastic, PVC and damp surfaces
Suitable for interior & exterior use
Tools Needed
Sharp Knife
Fine Sandpaper
Properties
Ready to use
Rapid dry: sand and paint after 15 minutes (5 mm layer at 20°C) with all types of paint
Easy to sand
Will not shrink
Accepts nails and screws
Maximum layer thickness: 5 mm
Maximum depth: 5 mm
Must be painted over when used outside (minimum 2 coats)
Colour: White
How to apply
Substrate must be clean, dry, dust and grease free.
Remove all loose materials.
Mix the product well before use.
Press filler into crack with a filling knife, smoothing off with a wet filling knife.
For deeper repairs, build up in layers of 5 mm, letting the product dry in between layers.
Remove any excess filler and leave to dry.
Once dry sand lightly if required.
Clean tools and hands with warm water immediately after use.
Do not store or use below 5°C.
Out Of Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Nordsjö Professional Super Filler is an ideal product for indoors and outdoors. Effortlessly fills holes up to 10 cm deep. Does not sag, also suitable for vertical and ceiling repairs. You are always assured of a premium result.
Fills cracks and holes up to 10cm in brick, stone, wood, fibre cement, render, concrete, polystyrene, plasterboard, plaster and stucco
Ideal for over-head applications (non-slump formula)
Excellent adhesion to all cementitious surfaces
Suitable for interior and exterior applications
Not suitable for use on damp surfaces
Tools Needed:
Filling Knife
Properties:
Ready to use
Will not shrink or sag
Easy to sand
Accepts nails and screws
Paintable after approx. 2 hours (5 cm layer at 20°C) with a water-based paint
Sandable after 24 hours
Accepts oil-based paints after 48 hours
Maximum layer thickness: 5 cm
Maximum depth: 10 cm
Colour: Light Grey
How to Apply:
Substrate must be clean, dry, dust and grease free.
Remove all loose material.
Mix well before use.
Product can be used directly from the pot.
Apply the product firmly in to the hole with a filling knife.
For a super smooth result, finish with a damp filling knife.
For holes deeper than 5 cm, apply in layers, with sufficient drying time between the layers.
Replace cover sheet after use and ensure lid is properly closed.
Once dry sand to a smooth nish.
Clean tools with warm water immediately after use.
Do not store or use under 5°C.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Nordsjö Professional Super Filler is an ideal product for indoors and outdoors. Effortlessly fills holes up to 10 cm deep. Does not sag, also suitable for vertical and ceiling repairs. You are always assured of a premium result.
Fills cracks and holes up to 10cm in brick, stone, wood, fibre cement, render, concrete, polystyrene, plasterboard, plaster and stucco
Ideal for over-head applications (non-slump formula)
Excellent adhesion to all cementitious surfaces
Suitable for interior and exterior applications
Not suitable for use on damp surfaces
Tools Needed:
Filling Knife
Properties:
Ready to use
Will not shrink or sag
Easy to sand
Accepts nails and screws
Paintable after approx. 2 hours (5 cm layer at 20°C) with a water-based paint
Sandable after 24 hours
Accepts oil-based paints after 48 hours
Maximum layer thickness: 5 cm
Maximum depth: 10 cm
Colour: Light Grey
How to Apply:
Substrate must be clean, dry, dust and grease free.
Remove all loose material.
Mix well before use.
Product can be used directly from the pot.
Apply the product firmly in to the hole with a filling knife.
For a super smooth result, finish with a damp filling knife.
For holes deeper than 5 cm, apply in layers, with sufficient drying time between the layers.
Replace cover sheet after use and ensure lid is properly closed.
Once dry sand to a smooth nish.
Clean tools with warm water immediately after use.
Do not store or use under 5°C.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Nordsjö Professional Super Filler is an ideal product for indoors and outdoors. Effortlessly fills holes up to 10 cm deep. Does not sag, also suitable for vertical and ceiling repairs. You are always assured of a premium result.
Fills cracks and holes up to 10cm in brick, stone, wood, fibre cement, render, concrete, polystyrene, plasterboard, plaster and stucco
Ideal for over-head applications (non-slump formula)
Excellent adhesion to all cementitious surfaces
Suitable for interior and exterior applications
Not suitable for use on damp surfaces
Tools Needed:
Filling Knife
Properties:
Ready to use
Will not shrink or sag
Easy to sand
Accepts nails and screws
Paintable after approx. 2 hours (5 cm layer at 20°C) with a water-based paint
Sandable after 24 hours
Accepts oil-based paints after 48 hours
Maximum layer thickness: 5 cm
Maximum depth: 10 cm
Colour: Light Grey
How to Apply:
Substrate must be clean, dry, dust and grease free.
Remove all loose material.
Mix well before use.
Product can be used directly from the pot.
Apply the product firmly in to the hole with a filling knife.
For a super smooth result, finish with a damp filling knife.
For holes deeper than 5 cm, apply in layers, with sufficient drying time between the layers.
Replace cover sheet after use and ensure lid is properly closed.
Once dry sand to a smooth nish.
Clean tools with warm water immediately after use.
Do not store or use under 5°C.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Nordsjö Professional Super Filler is an ideal product for indoors and outdoors. Effortlessly fills holes up to 10 cm deep. Does not sag, also suitable for vertical and ceiling repairs. You are always assured of a premium result.
Fills cracks and holes up to 10cm in brick, stone, wood, fibre cement, render, concrete, polystyrene, plasterboard, plaster and stucco
Ideal for over-head applications (non-slump formula)
Excellent adhesion to all cementitious surfaces
Suitable for interior and exterior applications
Not suitable for use on damp surfaces
Tools Needed:
Filling Knife
Properties:
Ready to use
Will not shrink or sag
Easy to sand
Accepts nails and screws
Paintable after approx. 2 hours (5 cm layer at 20°C) with a water-based paint
Sandable after 24 hours
Accepts oil-based paints after 48 hours
Maximum layer thickness: 5 cm
Maximum depth: 10 cm
Colour: Light Grey
How to Apply:
Substrate must be clean, dry, dust and grease free.
Remove all loose material.
Mix well before use.
Product can be used directly from the pot.
Apply the product firmly in to the hole with a filling knife.
For a super smooth result, finish with a damp filling knife.
For holes deeper than 5 cm, apply in layers, with sufficient drying time between the layers.
Replace cover sheet after use and ensure lid is properly closed.
Once dry sand to a smooth nish.
Clean tools with warm water immediately after use.
Do not store or use under 5°C.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Nordsjö Professional Light and Smooth Super Filler, fills without the need for sanding. Thanks to our unique lightweight technology, our Light and Smooth filler immediately gives you a smooth finish. It does not sag and is easy to model, making it ideal for ceilings and walls.
High performance extra lightweight filler for all general interior and exterior repairs
Fills deep cracks and holes up to 10cm in plasterboard, wood, fiber cement, concrete, brick and most other common building materials
Ideal for over-head applications (non-slump formula)
Properties
Ready to use
Will not shrink or sag
Super smooth finish – no sanding required
Paintable with all types of paint
Maximum layer thickness: 5 cm
Maximum depth: 10 cm
Easy to apply and shape
Quick drying: paint after approx. 2 hours (5 cm layer at 20°C) with water-based paints
How to apply
Substrate must be clean, dry, dust and grease free.
Remove all loose materials.
Before application, metal surfaces such as nails and screws should be treated with an appropriate rust resistant primer.
Stir into a smooth paste (if the filler is too dry, just add a few drops of water).
Press filler into hole with a filling knife, smoothing off with a wet filling knife.
For holes deeper than 5 cm, apply in layers, with sufficient drying time between the layers.
No sanding is required. If sanding, wait for 24 hours.
If painting over with an oil-based finish, wait 14 days.
Must be painted over when used outside (minimum 2 coats).
Colour: White.
Not suitable for drilling.
Clean tools and hands immediately after use with warm water.
Do not store or use below 5 ° C.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Nordsjö Professional Light and Smooth Super Filler, fills without the need for sanding. Thanks to our unique lightweight technology, our Light and Smooth filler immediately gives you a smooth finish. It does not sag and is easy to model, making it ideal for ceilings and walls.
High performance extra lightweight filler for all general interior and exterior repairs
Fills deep cracks and holes up to 10cm in plasterboard, wood, fiber cement, concrete, brick and most other common building materials
Ideal for over-head applications (non-slump formula)
Properties
Ready to use
Will not shrink or sag
Super smooth finish – no sanding required
Paintable with all types of paint
Maximum layer thickness: 5 cm
Maximum depth: 10 cm
Easy to apply and shape
Quick drying: paint after approx. 2 hours (5 cm layer at 20°C) with water-based paints
How to apply
Substrate must be clean, dry, dust and grease free.
Remove all loose materials.
Before application, metal surfaces such as nails and screws should be treated with an appropriate rust resistant primer.
Stir into a smooth paste (if the filler is too dry, just add a few drops of water).
Press filler into hole with a filling knife, smoothing off with a wet filling knife.
For holes deeper than 5 cm, apply in layers, with sufficient drying time between the layers.
No sanding is required. If sanding, wait for 24 hours.
If painting over with an oil-based finish, wait 14 days.
Must be painted over when used outside (minimum 2 coats).
Colour: White.
Not suitable for drilling.
Clean tools and hands immediately after use with warm water.
Do not store or use below 5 ° C.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Nordsjö Professional Light and Smooth Super Filler, fills without the need for sanding. Thanks to our unique lightweight technology, our Light and Smooth filler immediately gives you a smooth finish. It does not sag and is easy to model, making it ideal for ceilings and walls.
High performance extra lightweight filler for all general interior and exterior repairs
Fills deep cracks and holes up to 10cm in plasterboard, wood, fiber cement, concrete, brick and most other common building materials
Ideal for over-head applications (non-slump formula)
Properties
Ready to use
Will not shrink or sag
Super smooth finish – no sanding required
Paintable with all types of paint
Maximum layer thickness: 5 cm
Maximum depth: 10 cm
Easy to apply and shape
Quick drying: paint after approx. 2 hours (5 cm layer at 20°C) with water-based paints
How to apply
Substrate must be clean, dry, dust and grease free.
Remove all loose materials.
Before application, metal surfaces such as nails and screws should be treated with an appropriate rust resistant primer.
Stir into a smooth paste (if the filler is too dry, just add a few drops of water).
Press filler into hole with a filling knife, smoothing off with a wet filling knife.
For holes deeper than 5 cm, apply in layers, with sufficient drying time between the layers.
No sanding is required. If sanding, wait for 24 hours.
If painting over with an oil-based finish, wait 14 days.
Must be painted over when used outside (minimum 2 coats).
Colour: White.
Not suitable for drilling.
Clean tools and hands immediately after use with warm water.
Do not store or use below 5 ° C.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Nordsjö Professional Fine Filler is an indoor super smooth filler for primed new wood or previously painted clean wooden surfaces and or concrete walls and ceilings. It is ideal for fixing minor imperfections on painted surfaces before repainting. On wood, it is ideal for cracks and joints.
For use on interior walls and joinery, including doors, windows, trim, architraves and skirting boards
Fill fine cracks up to 2mm, minor blemishes or wood grain for a professional, glass smooth surface for painting
Properties
Ready to use
Sand & paint after 4 hours
Super smooth white finish
Easy to sand
Maximum depth: 2 mm
Particle size: Max 0.10 mm
How to apply
Substrate and crack must be clean, dry and free from loose material.
New wood should be primed first.
Rub down gloss surfaces for improved adhesion.
Metal surfaces such as nails and screws should be treated with an appropriate rust resistant primer.
Apply with a filling knife and spread over the surface, pressing in well.
Remove any excess filler and leave to dry.
For an even smoother finish rub down with fine sand paper.
Use appropriate protection when sanding.
Do not apply when the surface temperature is below + 5°C.
Replace lid after use.
Wash tools with warm water.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Nordsjö Professional Fine Filler is an indoor super smooth filler for primed new wood or previously painted clean wooden surfaces and or concrete walls and ceilings. It is ideal for fixing minor imperfections on painted surfaces before repainting. On wood, it is ideal for cracks and joints.
For use on interior walls and joinery, including doors, windows, trim, architraves and skirting boards
Fill fine cracks up to 2mm, minor blemishes or wood grain for a professional, glass smooth surface for painting
Properties
Ready to use
Sand & paint after 4 hours
Super smooth white finish
Easy to sand
Maximum depth: 2 mm
Particle size: Max 0.10 mm
How to apply
Substrate and crack must be clean, dry and free from loose material.
New wood should be primed first.
Rub down gloss surfaces for improved adhesion.
Metal surfaces such as nails and screws should be treated with an appropriate rust resistant primer.
Apply with a filling knife and spread over the surface, pressing in well.
Remove any excess filler and leave to dry.
For an even smoother finish rub down with fine sand paper.
Use appropriate protection when sanding.
Do not apply when the surface temperature is below + 5°C.
Replace lid after use.
Wash tools with warm water.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Nordsjö Professional Fine Filler is an indoor super smooth filler for primed new wood or previously painted clean wooden surfaces and or concrete walls and ceilings. It is ideal for fixing minor imperfections on painted surfaces before repainting. On wood, it is ideal for cracks and joints.
For use on interior walls and joinery, including doors, windows, trim, architraves and skirting boards
Fill fine cracks up to 2mm, minor blemishes or wood grain for a professional, glass smooth surface for painting
Properties
Ready to use
Sand & paint after 4 hours
Super smooth white finish
Easy to sand
Maximum depth: 2 mm
Particle size: Max 0.10 mm
How to apply
Substrate and crack must be clean, dry and free from loose material.
New wood should be primed first.
Rub down gloss surfaces for improved adhesion.
Metal surfaces such as nails and screws should be treated with an appropriate rust resistant primer.
Apply with a filling knife and spread over the surface, pressing in well.
Remove any excess filler and leave to dry.
For an even smoother finish rub down with fine sand paper.
Use appropriate protection when sanding.
Do not apply when the surface temperature is below + 5°C.
Replace lid after use.
Wash tools with warm water.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
The product that started it all. Original Gorilla Glue built a name for itself with its incredible, industrial holding power and versatility. Water activated, it expands into materials to form an incredibly strong bond to virtually anything. Gorilla Glue is your solution for almost any project or repair. It’s 100% waterproof, safe for indoor and outdoor use and strong enough to stand up to the elements. Plus, its expansion allows it to penetrate the glued surface for a superior bond. Sand it, paint it, stain it. Simply stated, it’s the Toughest Glue on Planet Earth.
Directions:
Prepare and Dampen the Surfaces
If you’re using Original Gorilla Glue for the first time, or bonding a new type of material, we always recommend trying a test piece first.
Prepare your surfaces: All surfaces must be clean, dust free and tight fitting. For shiny surfaces, such as metals, glass and some plastics, roughen up the material to give the glue something to bite into.
Damp It: Lightly dampen one surface with water. We recommend using a damp cloth or spraying with water. Do not saturate the surface. For dense hardwoods, lightly dampen both surfaces prior to gluing.
Evenly Apply Gorilla Glue Onto the Dry Surface
Glue It: Carefully apply onto the dry surface. Do not over apply. We recommend wearing gloves or spreading the glue with a disposable brush. In some instances, Gorilla Glue can be a skin sensitizer. If you are predisposed to skin reactions, please take the extra precaution.
If you do get the glue on your skin, try removing it with a dry cloth or paper towel first (particularly if the glue is still tacky). If that doesn’t work, try washing with soap and cold water, or using an exfoliator with a gritty texture. Dry your skin and apply lotion. We do not recommend using any kind of alcohol or acetone. This actually strips the skin of its natural oils, which means the glue is more likely to stick.
Clamp the Two Surfaces Together Tightly
Clamp It: Make sure the clamping pressure is distributed evenly across the surface. Or, if you don’t have a clamp, use heavy objects or Gorilla Tape® to achieve the appropriate clamping pressure. For lighter objects, try using rubber bands to hold the pieces together tightly. Clamp objects for 1–2 hours. For best results, allow 24 hours to cure.
Clean up
If you need to remove any uncured “squeeze out” or wet glue, we recommend wiping with a dry cloth or using a standard paint thinner. Make sure to read and follow directions if using a paint thinner. Always wear gloves. Once the glue is dry, it is best removed mechanically: Try sanding, chiselling, scraping or picking. The dried glue will not damage tools.
Storage Tips
After each use, wipe the bottle’s lid and nozzle clean with a dry cloth. For 2 oz. bottles, tightly replace the lid after wiping clean and store in a cool, dry place. For bottle sizes 4 oz. and larger, we suggest squeezing excess air out of the bottle. While still squeezing, tightly replace the cap and then store in a cool, dry place. This helps eliminate moisture in the bottle. You should expect a year shelf life.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
The product that started it all. Original Gorilla Glue built a name for itself with its incredible, industrial holding power and versatility. Water activated, it expands into materials to form an incredibly strong bond to virtually anything. Gorilla Glue is your solution for almost any project or repair. It’s 100% waterproof, safe for indoor and outdoor use and strong enough to stand up to the elements. Plus, its expansion allows it to penetrate the glued surface for a superior bond. Sand it, paint it, stain it. Simply stated, it’s the Toughest Glue on Planet Earth.
Directions:
Prepare and Dampen the Surfaces
If you’re using Original Gorilla Glue for the first time, or bonding a new type of material, we always recommend trying a test piece first.
Prepare your surfaces: All surfaces must be clean, dust free and tight fitting. For shiny surfaces, such as metals, glass and some plastics, roughen up the material to give the glue something to bite into.
Damp It: Lightly dampen one surface with water. We recommend using a damp cloth or spraying with water. Do not saturate the surface. For dense hardwoods, lightly dampen both surfaces prior to gluing.
Evenly Apply Gorilla Glue Onto the Dry Surface
Glue It: Carefully apply onto the dry surface. Do not over apply. We recommend wearing gloves or spreading the glue with a disposable brush. In some instances, Gorilla Glue can be a skin sensitizer. If you are predisposed to skin reactions, please take the extra precaution.
If you do get the glue on your skin, try removing it with a dry cloth or paper towel first (particularly if the glue is still tacky). If that doesn’t work, try washing with soap and cold water, or using an exfoliator with a gritty texture. Dry your skin and apply lotion. We do not recommend using any kind of alcohol or acetone. This actually strips the skin of its natural oils, which means the glue is more likely to stick.
Clamp the Two Surfaces Together Tightly
Clamp It: Make sure the clamping pressure is distributed evenly across the surface. Or, if you don’t have a clamp, use heavy objects or Gorilla Tape® to achieve the appropriate clamping pressure. For lighter objects, try using rubber bands to hold the pieces together tightly. Clamp objects for 1–2 hours. For best results, allow 24 hours to cure.
Clean up
If you need to remove any uncured “squeeze out” or wet glue, we recommend wiping with a dry cloth or using a standard paint thinner. Make sure to read and follow directions if using a paint thinner. Always wear gloves. Once the glue is dry, it is best removed mechanically: Try sanding, chiselling, scraping or picking. The dried glue will not damage tools.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
This product is a quality PVA glue suitable for general woodworking. It is non-toxic, will not stain timber and dries clear. Suitable for Wood, Particle Board, Unglazed Pottery, Laminating, veneers, paper, cardboard, leather, foam and cloth
Directions:
Ensure all surfaces are clean, dry and free of oil, grease and wax
Shake well before use
Only apply to one surface
Press surfaces together while the adhesive is still wet and clamp lightly (approx 2 to 4 hours in normal conditions)
Remove excess glue with a damp cloth
Great strength is achieved when dried overnight
Cleaning: Clean up with water. Wash hands after use
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Highly flexible as well as mould and UV resistant, Parfix All Purpose Silicone is suitable for use on shower screens, metal roofing, concrete and gutters.
Highly flexible
Mould and UV resistant
Neutral cure
Non-corrosive
Out Of Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Parfix everyday adhesive is an easy mix, two-part epoxy adhesive provides a strong, rigid bond, designed for use with most common household materials including china, metal, glass, leather, rubber, wood and most plastics.
Fast setting
Easy mix
Rigid bond
Out Of Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Parfix Fast Grip is a solvent-based contact adhesive that is heat and water-resistant, making it suitable for use in kitchens and bathrooms.
Immediate strong bond
Heat and water resistant
Brush application
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Paintable
Flexible
Durable
Parfix Gap Filler is a multi-purpose flexible filler that is suitable for interior applications such as skirting and architraves, door and window frames.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Parfix Glass Silicone Black: Unmatched Bonding for All Your Glass Needs
Key Features
Excellent bond to glass
Acetic cure for optimal sealing
Designed for interior and exterior use
UV resistant and shrink-proof
Specifications
Colour
Black
Model Name
Parfix Window and Glass 300g
Model Number
9300697122445
Material
Silicone polymer
Paintable
No
Stainable
No
UV Resistant
Yes
Outdoor
Yes
Indoor
Yes
Shrink Resistant
Yes
Sandable
No
Applications
Suitable for use on windows, glass partitions, and glass blocks.
Instructions
For optimal results, apply on clean, dry surfaces. Follow safety guidelines for acetic cure silicones.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Sanitary grade silicone
Acetic cure
Excellent adhesion
Watertight seal
Parfix Bathroom And Kitchen Silicone cures to produce a watertight seal and contains agents to resist the growth of mould and fungus. This white coloured sanitary grade sealant is most suited to use on shower recesses, splashbacks, bathtubs and vanities.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Sanitary grade silicone
Acetic cure
Excellent adhesion
Watertight seal
Parfix Bathroom And Kitchen Silicone cures to produce a watertight seal and contains agents to resist the growth of mould and fungus. This white coloured sanitary grade sealant is most suited to use on shower recesses, splashbacks, bathtubs and vanities.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Parfix Maxi Nails 300g: The Ultimate Multi-Surface Construction Adhesive
Key Features
High-strength bond suitable for a variety of applications
Paintable for aesthetic versatility
Effective both indoors and outdoors
Specifications
Colour:
Beige
Model Name:
Parfix 300g Maxi Nails Construction Adhesive
Material:
Polymer Dissolved in Hydrocarbon Solvent
Outdoor:
Yes
Indoor:
Yes
Why Choose Parfix Maxi Nails 300g?
Designed to handle a multitude of construction challenges, Parfix Maxi Nails 300g provides a robust bond that lasts. Whether you're working indoors or taking on external projects, this adhesive is formulated to give you the results you need.
Out Of Stock
Express Post: 1-3 Days | Standard Post: 2-5 Days
Parfix Maxi Nails Fast is a water based construction adhesive that grabs quickly and provides high bond strength between a wide range of materials including concrete, plywood, ceramics, brick and plasterboard.
Fast acting, adheres within minutes
Quick & easy clean up with water
Low odour
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Partix Multipurpose Filler Powder This product is ideal for filling cracks, holes and gaps inside the home. It is strong and can be easily sanded to a smooth finish ready for painting. When dry, it can be nailed or screwed without splitting or breaking.
SUITABLE FOR
Interior repairs to plaster, brick, plasterboard, masonry and timber. For repairs where movement occurs, use Parfix Gap Filler.
PREPARATION
Ensure surfaces are clean, dry and free from dust and loose material. Glossy surfaces should be roughened with sandpaper to provide key.
MIXING
Add 2½ parts of Parfix Multi-Purpose Filler to 1 part water (by volume) and mix thoroughly into a smooth paste with a clean filling knife.
Once mixed, stays workable for up to 45 minutes.
Do not add water to extend working time. 4 Contamination with dried filler will shorten the working time.
APPLICATION
Press filler into crack with a flexible filling blade (overfilling slightly to allow for sanding back) then smooth off.
Wait 3-4 hours for filler to dry before sanding with a medium grade sandpaper Use a damp sponge to wipe away dist
CLEANING
Clean tools with water and reseal pack after use. Store in a cool, dry place.
PAINT PREPARATION
Before painting, apply a suitable primer/undercoat
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Sandable
Paintable
Ready mixed
Weather resistant
Parfix multipurpose filler is a versatile, ready mixed filler ideal for filling cracks, holes and gaps inside and outside the home.
Sandable and paintable, it enables a smooth finish.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Sandable
Paintable
Ready mixed
Weather resistant
Parfix multipurpose filler is a versatile, ready mixed filler ideal for filling cracks, holes and gaps inside and outside the home.
Sandable and paintable, it enables a smooth finish.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Parfix PVA is a PVA based adhesive suitable for general interior woodworking joinery and other craft uses. It is non-toxic, will not stain timber and dries clear.
High strength
Clear drying
Water clean up
![MaxisiL A Silicone Sealant [Colour: A28 Brown]](//gluesaustralia.com.au/cdn/shop/files/693_720.jpg?v=1754724110&width=645)
![MaxisiL A Silicone Sealant [Colour: A29 Havana]](//gluesaustralia.com.au/cdn/shop/files/9326816000715.jpg?v=1754724111&width=645)
![Monarch Mini Gap Filler [Black]](//gluesaustralia.com.au/cdn/shop/files/9320090030567_dd3b7bac-a9e5-4986-9275-2bff35fb52de.jpg?v=1754712316&width=645)
![Monarch Mini Gap Filler [Brown]](//gluesaustralia.com.au/cdn/shop/files/9320090030574_91b63521-91d4-427c-ba6f-c5f54343a9c6.jpg?v=1754712314&width=645)
![Monarch Mini Gap Filler [Cream]](//gluesaustralia.com.au/cdn/shop/files/9320090030581_c5a95353-e7ee-4d92-8445-93066291f976.jpg?v=1754712313&width=645)
![Monarch Mini Gap Filler [White]](//gluesaustralia.com.au/cdn/shop/files/9320090029080_1b178ddb-e3de-4ec1-83bb-8e320595bdb3.jpg?v=1754712311&width=645)
![Monarch Mini Roof and Gutter Silicone [Black]](//gluesaustralia.com.au/cdn/shop/files/9320090029257_ad8c4dd8-7138-4341-881e-1e58084dc0c8.png?v=1754716023&width=645)
![Monarch Mini Roof and Gutter Silicone [Black]](//gluesaustralia.com.au/cdn/shop/files/9320090029257_d1f88907-d8a6-4e7f-b887-a4ac4f2ab20a.png?v=1754716023&width=645)
![Monarch Mini Silicone Mould Resistant [Translucent]](//gluesaustralia.com.au/cdn/shop/files/9320090029073_9b2a79dd-e58b-4fb6-a3b1-d6525871d967.png?v=1754712303&width=645)
![Monarch Mini Silicone Mould Resistant [White]](//gluesaustralia.com.au/cdn/shop/files/9320090029066_2af7d350-636b-476c-9c8a-71b4ddb4f0e5.png?v=1754712301&width=645)
![Parfix Gap Filler Flexible Paintable Interior [White]](//gluesaustralia.com.au/cdn/shop/files/9300697115812_e966678a-f2ee-4e79-abc6-2f960851c302.png?v=1754712264&width=645)
![Parfix Kitchen & Bathroom Silicone Sealant 300g [White]](//gluesaustralia.com.au/cdn/shop/files/9300697115928_85e9adb4-ec92-46ea-8eda-b6ab353e59f8.jpg?v=1754712261&width=645)
![Parfix Kitchen Bathroom Silicone Sealant [Clear]](//gluesaustralia.com.au/cdn/shop/files/9300697115935_9d24cb9e-09d9-43f4-8d51-2c3a3b021f3d.jpg?v=1754712259&width=645)
![MaxisiL A Silicone Sealant [Colour: A28 Brown]](http://gluesaustralia.com.au/cdn/shop/files/693_720.jpg?v=1754724110&width=645)
![MaxisiL A Silicone Sealant [Colour: A29 Havana]](http://gluesaustralia.com.au/cdn/shop/files/9326816000715.jpg?v=1754724111&width=645)
![Monarch Mini Gap Filler [Black]](http://gluesaustralia.com.au/cdn/shop/files/9320090030567_dd3b7bac-a9e5-4986-9275-2bff35fb52de.jpg?v=1754712316&width=645)
![Monarch Mini Gap Filler [Brown]](http://gluesaustralia.com.au/cdn/shop/files/9320090030574_91b63521-91d4-427c-ba6f-c5f54343a9c6.jpg?v=1754712314&width=645)
![Monarch Mini Gap Filler [Cream]](http://gluesaustralia.com.au/cdn/shop/files/9320090030581_c5a95353-e7ee-4d92-8445-93066291f976.jpg?v=1754712313&width=645)
![Monarch Mini Gap Filler [White]](http://gluesaustralia.com.au/cdn/shop/files/9320090029080_1b178ddb-e3de-4ec1-83bb-8e320595bdb3.jpg?v=1754712311&width=645)
![Monarch Mini Roof and Gutter Silicone [Black]](http://gluesaustralia.com.au/cdn/shop/files/9320090029257_ad8c4dd8-7138-4341-881e-1e58084dc0c8.png?v=1754716023&width=645)
![Monarch Mini Roof and Gutter Silicone [Black]](http://gluesaustralia.com.au/cdn/shop/files/9320090029257_d1f88907-d8a6-4e7f-b887-a4ac4f2ab20a.png?v=1754716023&width=645)
![Monarch Mini Silicone Mould Resistant [Translucent]](http://gluesaustralia.com.au/cdn/shop/files/9320090029073_9b2a79dd-e58b-4fb6-a3b1-d6525871d967.png?v=1754712303&width=645)
![Monarch Mini Silicone Mould Resistant [White]](http://gluesaustralia.com.au/cdn/shop/files/9320090029066_2af7d350-636b-476c-9c8a-71b4ddb4f0e5.png?v=1754712301&width=645)
![Parfix Gap Filler Flexible Paintable Interior [White]](http://gluesaustralia.com.au/cdn/shop/files/9300697115812_e966678a-f2ee-4e79-abc6-2f960851c302.png?v=1754712264&width=645)
![Parfix Kitchen & Bathroom Silicone Sealant 300g [White]](http://gluesaustralia.com.au/cdn/shop/files/9300697115928_85e9adb4-ec92-46ea-8eda-b6ab353e59f8.jpg?v=1754712261&width=645)
![Parfix Kitchen Bathroom Silicone Sealant [Clear]](http://gluesaustralia.com.au/cdn/shop/files/9300697115935_9d24cb9e-09d9-43f4-8d51-2c3a3b021f3d.jpg?v=1754712259&width=645)
