In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Overview: Selleys White For Life Wet Area Waterproof Silicone Sealant is a premium, 100% silicone sealant designed to provide a long-lasting, waterproof, and mould-resistant seal in high-moisture areas such as bathrooms, kitchens, and laundries. Its advanced formulation ensures the sealant remains brilliant white over time, resisting yellowing, staining, and blackening.
Surface Preparation: Ensure all surfaces are clean, dry, and free from dirt, dust, oil, and loose materials. Clean the area with mineral turpentine and wipe dry with a clean cloth before application.
Application Instructions:
Cut the nozzle at a 45° angle to the desired bead size.
Cut the cartridge tip and fit the nozzle.
Place the cartridge into a caulking gun and apply steady pressure to ensure the sealant is pushed into the joint.
Tool the sealant with a spatula dipped in detergent water within 5-10 minutes of application for a smooth finish.
Clean up any excess sealant with mineral turpentine before it skins.
Allow the sealant to cure fully, which typically takes 72 hours.
Coverage: The coverage depends on the joint size; for example, a 5mm x 5mm joint will yield approximately 12 linear meters per 300g cartridge.
Drying Time: The sealant skins in about 10 minutes and cures fully in 72 hours.
Clean-Up: Uncured sealant can be removed with mineral turpentine. Once cured, the sealant is extremely difficult to remove and must be abraded or trimmed with a knife.
Technical Data:
Technology: Acetic cure silicone
Colour: White
Density: 1.05 g/cm³
Shore A Hardness: Approximately 20
Tensile Strength: 1.5 MPa
Elongation at Break: 400%
Service Temperature Range: -60°C to +150°C
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Selleys MarineFlex delivers a waterproof seal for joints & gaps, even under water*. Suitable for boats, pools & spas.
MarineFlex high-performance adhesive sealant can be used on boats, pools & spas, where you need a waterproof seal or bond, even underwater* It can be applied & will cure under water – no need to drain your pool or spa. Compared to traditional polyurethanes it provides a more durable seal & bond with superior UV resistance.
Features
Salt, fresh & chlorinated water (pools/spas)^
Above and below the waterline
No primer required
Shock absorbing & vibration dampening
Solvent & isocyanate free
Sandable when fully cured
Powered by Sil-X advanced polymer technology
Limitations
#Not suitable for PP, PE or PTFE
*critical seals/repairs underwater should be regularly checked & repaired if required. Not for polycarbonate and Perspex underwater
^Gelcoat must be lightly sanded prior to product application
Where can this product be used?
Suitable for boats, pools & spas^
What materials is this product suitable for?
Metals
Glass
Ceramic Tiles
Sealed/painted timber & concrete
Fibreglass
Gelcoat*
Most plastics# (pre-test before use)
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Sika AnchorFix®-1 is a high-performance, styrene-free chemical anchoring adhesive designed for fast and reliable installations in both construction and DIY projects. This two-component, solvent-free, polyester-based adhesive is ideal for securing rebars, threaded rods, bolts, and special fastening systems in concrete, hollow and solid masonry, hard natural stone, and solid rock. It cures rapidly, even in low temperatures, and can be applied using standard guns.
Advantages:
Fast curing
Compatible with standard guns
Usable in low temperatures
High load capacity
ETA approved
Non-sag, even overhead
Styrene-free
Low odor and wastage
Technical Information:
Compressive Strength: ~60 N/mm² (7 days, +20°C)
Modulus of Elasticity in Compression: ~3,500 N/mm²
Tensile Strength in Flexure: ~28 N/mm²
Tensile Strength: ~12 N/mm²
Temperature Resistance: +50°C (long-term), +80°C (short-term)
Glass Transition Temperature: +60°C
Color:
Component A: White
Component B: Black
Mixed: Light grey
Usage: Ideal for various grades of rebars, threaded rods, bolts, and special fastening systems. Substrates may vary, so testing is recommended to ensure suitability, especially with natural stones. Always ensure the substrate is clean, dry, and free of contaminants. Perform pull-out tests if the substrate strength is unknown.
Mixing and Application:
Mix the components in a 10:1 ratio by volume.
The material must be between +5°C and +40°C for application.
Ensure the substrate temperature is between -10°C and +40°C.
Shelf Life and Storage:
Shelf life is 12 months from the date of production when stored properly.
Store in unopened, sealed, and undamaged packaging in dry conditions between +5°C and +25°C.
Curing Times:
+30°C: Open time 4 minutes, Curing time 35 minutes
+25°C: Open time 4 minutes, Curing time 40 minutes
+20°C: Open time 5 minutes, Curing time 50 minutes
+10°C: Open time 6 minutes, Curing time 85 minutes
+5°C: Open time 10 minutes, Curing time 145 minutes
-10°C: Open time 30 minutes, Curing time 24 hours
Approvals and Certifications:
Complies with NCC 2019 reference to AS 5216:2018 for post-installed and cast-in fastenings in concrete.
ETA-approved for use in masonry and non-cracked concrete, with CE marking.
Cleaning of Equipment:
Clean tools with Sika® Colma Cleaner immediately after use. Hardened material can only be removed mechanically.
For detailed design considerations, refer to "Technical Documentation Sika AnchorFix®-1" (Ref: 870 43 01).
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Premium, coarse-grained, wide crack filler, Coarse-grained consistency for maximum filling capacity. Application thickness up to 5mm per layer, to a maximum of 30mm. Fast drying and easy to sand
Use:
Suitable for indoor filling and repair where thicker filling capability is needed
A finer grade filler such as Sika® Filler 101 should be used for finishing surfaces before painting
Features
Ready to use, no mixing required
Easy application
Thick layer filling and levelling ability
High initial tack or grab on plaster and concrete
Quick drying
Colour: Grey
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Premium, coarse-grained, wide crack filler, Coarse-grained consistency for maximum filling capacity. Application thickness up to 5mm per layer, to a maximum of 30mm. Fast drying and easy to sand
Use:
Suitable for indoor filling and repair where thicker filling capability is needed
A finer grade filler such as Sika® Filler 101 should be used for finishing surfaces before painting
Features
Ready to use, no mixing required
Easy application
Thick layer filling and levelling ability
High initial tack or grab on plaster and concrete
Quick drying
Colour: Grey
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Premium, coarse-grained, wide crack filler, Coarse-grained consistency for maximum filling capacity. Application thickness up to 5mm per layer, to a maximum of 30mm. Fast drying and easy to sand
Use:
Suitable for indoor filling and repair where thicker filling capability is needed
A finer grade filler such as Sika® Filler 101 should be used for finishing surfaces before painting
Features
Ready to use, no mixing required
Easy application
Thick layer filling and levelling ability
High initial tack or grab on plaster and concrete
Quick drying
Colour: Grey
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
SIKA® FILLER 107 | PLASTER FILLER
Premium, wet area, fine surface filler
Fine surface filler that will not rehydrate in humid conditions such as kitchens and bathrooms
Application thickness up to 4mm per layer
Suitable for use in exterior situations when overpainted
USE
Sika® Filler 107 is suitable for interior surface filling work on plaster, woven fabrics, old wallpapers, etc. in wet environments such as kitchens and bathrooms etc.
CHARACTERISTICS AND ADVANTAGES
Ready to use, no mixing required
Easy application
High initial tack or grab on plaster and concrete
Quick drying
Not sensitive to moisture
Appearance / Colours Grey / blue, grey paste
Storage
Storage Conditions / Shelf-Life
12 months from date of production if stored properly in undamaged and unopened original sealed packaging, in dry conditions. Protect from frost.
Technical Data
Chemical Base Filled styrene-acrylate dispersion
Density ~ 1.050 kg/l
Solid Content ~ 62%
Grading Dmax : 0.15 mm
Layer Thickness 4 mm max.
Consumption This depends on the substrate roughness and thickness of the layer applied.
As a guide, ~ 1 l of Sika® Filler-107 can fill ~ 1 m2 per mm thick.
Substrate Quality Clean, free from dust, dry and oil.
Application Conditions / Limitations
Substrate Temperature +5°C min. / +35°C max.
Ambient Temperature +5°C min. / +35°C max.
Application Instructions
Mixing Sika® Filler-107 is supplied ready to use - no mixing is required.
Application Method / Tools
Sika® Filler-107 can be applied with a spatula in layer thicknesses from 0 - 4 mm. When filling deep holes or cracks above 4 mm the filler should be applied in several layers and must be allowed to almost dry before each subsequent layer is applied.
Cleaning of Tools Clean all tools and application equipment with water immediately after use. Hardened/cured material can only be mechanically removed.
Waiting Time / Overcoating
Drying Time: 2 to 4 hours (thicker applications might require longer time)
Paintability: Approx. 12 hours
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
SIKA® FILLER 107 | PLASTER FILLER
Premium, wet area, fine surface filler
Fine surface filler that will not rehydrate in humid conditions such as kitchens and bathrooms
Application thickness up to 4mm per layer
Suitable for use in exterior situations when overpainted
USE
Sika® Filler 107 is suitable for interior surface filling work on plaster, woven fabrics, old wallpapers, etc. in wet environments such as kitchens and bathrooms etc.
CHARACTERISTICS AND ADVANTAGES
Ready to use, no mixing required
Easy application
High initial tack or grab on plaster and concrete
Quick drying
Not sensitive to moisture
Appearance / Colours Grey / blue, grey paste
Packaging 500 ml plastic tube
5 l and 10 l plastic pail
Storage
Storage Conditions / Shelf-Life
12 months from date of production if stored properly in undamaged and unopened original sealed packaging, in dry conditions. Protect from frost.
Technical Data
Chemical Base Filled styrene-acrylate dispersion
Density ~ 1.050 kg/l
Solid Content ~ 62%
Grading Dmax : 0.15 mm
Layer Thickness 4 mm max.
Consumption This depends on the substrate roughness and thickness of the layer applied.
As a guide, ~ 1 l of Sika® Filler-107 can fill ~ 1 m2 per mm thick.
Substrate Quality Clean, free from dust, dry and oil.
Application Conditions / Limitations
Substrate Temperature +5°C min. / +35°C max.
Ambient Temperature +5°C min. / +35°C max.
Application Instructions
Mixing Sika® Filler-107 is supplied ready to use - no mixing is required.
Application Method / Tools
Sika® Filler-107 can be applied with a spatula in layer thicknesses from 0 - 4 mm. When filling deep holes or cracks above 4 mm the filler should be applied in several layers and must be allowed to almost dry before each subsequent layer is applied.
Cleaning of Tools Clean all tools and application equipment with water immediately after use. Hardened/cured material can only be mechanically removed.
Waiting Time / Overcoating
Drying Time: 2 to 4 hours (thicker applications might require longer time)
Paintability: Approx. 12 hours
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
SIKA® FILLER-101 | FINE SURFACE FILLER
Premium, fine surface filler
Very fine consistency for fine surface filling
Application thickness up to 3mm per layer
Fast drying and easy to sand
USE
Suitable for indoor filling work on plaster boards, fabrics, old wallpapers, etc.
Smooth finish
CHARACTERISTICS AND ADVANTAGES
Ready to use, no mixing required
Easy application
High initial tack or grab on plaster and concrete
Quick drying
COLOUR: White
Appearance / Colour White paste
Packaging 500 ml plastic tube
Storage
Storage Conditions / Shelf-Life
12 months from date of production if stored properly in undamaged and unopened original sealed packaging, in cool and dry conditions. Protect from frost.
Technical Data
Chemical Base Filled styrene-acrylate dispersion.
Density ~ 1.100 kg/l
Solid Content
~ 55%
Grading Dmax : 0.12 mm
Layer Thickness 3 mm max.
Application Details
Consumption
This depends on the substrate roughness and thickness of the layer applied.
As a guide, ~ 1 l of Sika®
Filler-101 can fill ~ 1 m2 per mm thick.
Substrate Quality Clean, free from dust, dry and oil.
Application
Conditions / Limitations
Substrate Temperature +5°C min. / +35°C max.
Ambient Temperature +5°C min. / +35°C max.
Application Instructions
Mixing Sika® Filler-101 is supplied ready to use - no mixing is required.
Application Method / Tools
Sika® Filler-101 can be applied with spatula in layer thicknesses from 0 - 3 mm. When filling deeper holes or cracks the filler must be applied in several layers and must be allowed to almost dry. Holes and cracks from 4 - 15 mm can more easily be filled with Sika® Filler-105. When dried finish the surface with Sika® Filler-101. Cleaning of Tools Clean all tools and application equipment with water immediately after use. Hardened / cured material can only be mechanically removed.
Waiting Time / Overcoating
Drying Time: ~ 2 hours
Paintability: ~ 4 hours
Value Base All technical data stated in this Product Data Sheet are based on laboratory tests.
Actual measured data may vary due to circumstances beyond our control.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
SIKA® FILLER-101 | FINE SURFACE FILLER
Premium, fine surface filler
Very fine consistency for fine surface filling
Application thickness up to 3mm per layer
Fast drying and easy to sand
USE
Suitable for indoor filling work on plaster boards, fabrics, old wallpapers, etc.
Smooth finish
CHARACTERISTICS AND ADVANTAGES
Ready to use, no mixing required
Easy application
High initial tack or grab on plaster and concrete
Quick drying
COLOUR: White
Appearance / Colour White paste
Packaging 500 ml plastic tube
Storage
Storage Conditions / Shelf-Life
12 months from date of production if stored properly in undamaged and unopened original sealed packaging, in cool and dry conditions. Protect from frost.
Technical Data
Chemical Base Filled styrene-acrylate dispersion.
Density ~ 1.100 kg/l
Solid Content
~ 55%
Grading Dmax : 0.12 mm
Layer Thickness 3 mm max.
Application Details
Consumption
This depends on the substrate roughness and thickness of the layer applied.
As a guide, ~ 1 l of Sika®
Filler-101 can fill ~ 1 m2 per mm thick.
Substrate Quality Clean, free from dust, dry and oil.
Application
Conditions / Limitations
Substrate Temperature +5°C min. / +35°C max.
Ambient Temperature +5°C min. / +35°C max.
Application Instructions
Mixing Sika® Filler-101 is supplied ready to use - no mixing is required.
Application Method / Tools
Sika® Filler-101 can be applied with spatula in layer thicknesses from 0 - 3 mm. When filling deeper holes or cracks the filler must be applied in several layers and must be allowed to almost dry. Holes and cracks from 4 - 15 mm can more easily be filled with Sika® Filler-105. When dried finish the surface with Sika® Filler-101. Cleaning of Tools Clean all tools and application equipment with water immediately after use. Hardened / cured material can only be mechanically removed.
Waiting Time / Overcoating
Drying Time: ~ 2 hours
Paintability: ~ 4 hours
Value Base All technical data stated in this Product Data Sheet are based on laboratory tests.
Actual measured data may vary due to circumstances beyond our control.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
SIKA® FILLER-101 | FINE SURFACE FILLER
Premium, fine surface filler
Very fine consistency for fine surface filling
Application thickness up to 3mm per layer
Fast drying and easy to sand
USE
Suitable for indoor filling work on plaster boards, fabrics, old wallpapers, etc.
Smooth finish
CHARACTERISTICS AND ADVANTAGES
Ready to use, no mixing required
Easy application
High initial tack or grab on plaster and concrete
Quick drying
COLOUR: White
Appearance / Colour White paste
Packaging 500 ml plastic tube
Storage
Storage Conditions / Shelf-Life
12 months from date of production if stored properly in undamaged and unopened original sealed packaging, in cool and dry conditions. Protect from frost.
Technical Data
Chemical Base Filled styrene-acrylate dispersion.
Density ~ 1.100 kg/l
Solid Content
~ 55%
Grading Dmax : 0.12 mm
Layer Thickness 3 mm max.
Application Details
Consumption
This depends on the substrate roughness and thickness of the layer applied.
As a guide, ~ 1 l of Sika®
Filler-101 can fill ~ 1 m2 per mm thick.
Substrate Quality Clean, free from dust, dry and oil.
Application
Conditions / Limitations
Substrate Temperature +5°C min. / +35°C max.
Ambient Temperature +5°C min. / +35°C max.
Application Instructions
Mixing Sika® Filler-101 is supplied ready to use - no mixing is required.
Application Method / Tools
Sika® Filler-101 can be applied with spatula in layer thicknesses from 0 - 3 mm. When filling deeper holes or cracks the filler must be applied in several layers and must be allowed to almost dry. Holes and cracks from 4 - 15 mm can more easily be filled with Sika® Filler-105. When dried finish the surface with Sika® Filler-101. Cleaning of Tools Clean all tools and application equipment with water immediately after use. Hardened / cured material can only be mechanically removed.
Waiting Time / Overcoating
Drying Time: ~ 2 hours
Paintability: ~ 4 hours
Value Base All technical data stated in this Product Data Sheet are based on laboratory tests.
Actual measured data may vary due to circumstances beyond our control.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Sika Firerate is a gunnable acrylic based jointing and sealing compound specially formulated with inorganic fillers to provide a fire barrier. Sika Firerate has been tested for fire resistance for up to 4 hours according to AS 1530.4 in masonry wall and floor joints.
USE
Sika Firerate is suitable for sealing joints in concrete or masonry that must have a fire rated resistance to Australian Standards. Sika Firerate also fulfils the basic function of a gap filler and joint sealant against water and dust penetration.
CHARACTERISTICS AND ADVANTAGES
Safe to use – contains no asbestos or fibres.
Paintable.
Good flexibility and adhesion to concrete and masonry.
Interior use only.
Easily applied with normal caulking equipment.
Easy tooling off.
Economical – single product for both fireproofing and sealing functions.
Water clean-up of tools and equipment while still uncured.
Excellent acoustic performance, test report available.
COLOUR
Grey
CHARACTERISTICS/ADVANTAGES
• Up to 4 hours fire resistance according to AS 1530.4
• Very good resistance to weathering
• Movement capability of ± 20 %
• Easy to smooth and very good workability
• Good adhesion to many different substrates
• Water clean-up of uncured sealant
.
APPROVALS / STANDARDS
• AS 1530.4 FRL
• ISO 717.2 Rw (Ctr) = 64 (-13)
SUBSTRATE PREPARATION
The substrate must be clean, dry, sound and homogeneous, free from oils, grease, dust and loose or friable particles. Sika® Firerate adheres without primers and/or activators.
APPLICATION METHOD / TOOLS
Sika® Firerate is supplied ready to use. After the necessary substrate preparation, insert a suitable backing rod to the required depth and apply any primer if necessary. Insert a foil pack or cartridge into the sealant gun and extrude Sika® Firerate into the joint making sure that it comes into full contact with the sides of the joint and avoids any air entrapment. Sika® Firerate sealant must be firmly tooled against the joint sides to ensure adequate adhesion. It is recommended to use masking tape where exact joint lines or neat lines are required. Remove the tape within the skin time. Do not use tooling products containing solvents. Water can be used if wet tooling is required.
CLEANING OF TOOLS
Clean all tools and application equipment immediately after use with water. Once cured, residual material can only be removed mechanically
LIMITATIONS
• Sika® Firerate may be overpainted with solvent free paints.
• Do not use Sika® Firerate on damp and/or wet substrates.
• Do not apply Sika Firerate at temperatures below 5ºC
• Do not use Sika® Firerate to seal joints in and around swimming pools.
• Do not use Sika® Firerate to seal joints in external applications on non-porous substrates.
• Do not use Sika® Firerate for joints under water pressure or for permanent water immersion.
• Do not expose uncured Sika® Firerate to rain or water as this may interfere with the curing reaction.
BASIS OF PRODUCT DATA
All technical data stated in this Data Sheet are based on laboratory tests. Actual measured data may vary due to circumstances beyond our control.
ECOLOGY, HEALTH AND SAFETY
For information and advice on the safe handling, storage and disposal of chemical products, users shall refer to the most recent Safety Data Sheet (SDS) containing physical, ecological, toxicological and other safety related data.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Showerbond is a solvent based, fast grab, gun grade adhesive. It has been specifically formulated for bonding plastic shower linings to gypsum plasterboard or fibre cement wall linings, as well as timber.
Use Showerbond is used for bonding plastic shower linings to wall linings.
Advantages
Fast curing.
Will not damage plastic shower liners.
Panels can be relocated for up to 30 minutes after positioning.
Excellent adhesion to most common building materials.
Easy to apply and clean up.
Recommended for use with Seratone Silverseal, Clearlite Showers, Duracryl®
,and Athena Showers
Product Data
Form: Smooth paste
Colour: Green
Storage & Shelf Life: Twelve (12) months when stored in original unopened containers in a cool, dry place
away from naked flames.
Packaging: Showerbond is supplied in 300 ml cartridges.
Technical Data
Solids content: 65% approx. by weight
Cure type: Solvent release
Cure rate: 24 hours @ 20C
Application temperature: 5C to 35C
Skinning time: 1 minute
Relocation time: Up to 30 minutes, depending on temperature and ventilation
Flammability: Flammable solvents are released during cure
Toxicity: Non toxic when cured
Movement accommodation: Slight, will accept normal building movement
Coverage: On average, one cartridge of Showerbond will supply 20 metres of 5 mm bead.
Application Conditions
Surface Preparation Ensure both surfaces to be bonded are clean, dry and grease free. Cut nozzle on cartridge as shown below so that a 5-6 mm bead will be extruded.
Application
Apply a 5-6 mm bead in vertical lines at 100 mm centres onto substrate, and apply continuous bead within 15 mm of the perimeter line of the shower lining.
Place shower lining onto wall within 10 minutes and firmly press the entire sheet with your hands so that full contact is made with all beads of adhesive.
Brace the lining as required in the shower manufacturer's installation instructions.
Bracing if required should remain in position for not less than 18 hours. The shower should not be used for at least 24 hours after the wall lining has been installed. Do not apply blobs of adhesive. These will cause unsightly undulations and buckles in the sheet.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
SikaBond®-115 Max Tack is a 1-part construction adhesive with high final strength, designed for bonding most construction material substrates. It is suitable for internal and sheltered outdoor use.
Key Features:
Easy to apply
Easy to clean
Rapid build-up of strength
High final strength
Very low emissions (Acrylic dispersion)
Applications:
Ideal for bonding various construction components, including:
Skirting boards
Wooden frames
Battens
Mouldings
Panels
Terracotta tiles
Anodised aluminium
Polystyrene mouldings and ceiling tiles
Bonds well to materials like:
Concrete
Mortar
Fibre cement
Wood
Painted surfaces
Shelf Life & Storage:
Shelf life: 18 months from production date.
Storage conditions: Store in original, unopened, undamaged packaging in a dry environment, at temperatures between +5°C and +25°C.
Technical Details:
Density: ~1.40 kg/l (ISO 1183-1)
Application Instructions:
Follow standard building and construction practices when applying SikaBond®-115 Max Tack.
Substrate Preparation:
Ensure the substrate is clean, sound, dry, and free from contaminants like oil, grease, cement laitance, old sealants, and loose paint.
Remove dust and friable material through wire brushing, grinding, sanding, or other mechanical methods.
For best results, follow these priming and pre-treatment steps:
Non-Porous Substrates:
For surfaces such as aluminium, anodised aluminium, stainless steel, PVC, and glazed tiles:
Slightly roughen the surface using a fine abrasive pad.
Clean and pre-treat using Sika® Aktivator-205 applied with a clean cloth. Wait 15 minutes before applying adhesive (within 6 hours).
For metals like copper, brass, and titanium-zinc:
Clean and pre-treat using Sika® Aktivator-205. After 15 minutes, apply Sika® Primer-3 N by brush. Wait at least 30 minutes (within 8 hours) before applying adhesive.
Porous Substrates:
For concrete, aerated concrete, mortars, and bricks:
Prime the surface with Sika® Primer-3 N. Wait at least 30 minutes (within 8 hours) before applying adhesive.
Note: Primers are adhesion promoters and are not a substitute for proper surface preparation. They also enhance the long-term bond strength.
Cleaning of Tools:
Clean tools and equipment immediately after use with Sika® Remover-208.
For skin cleaning, use Sika® Cleaning Wipes-100.
Once cured, the adhesive can only be removed mechanically.
For more information, please consult Sika Technical Services.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
SikaBond®-145 SuperGrip
Premium polyurethane construction adhesive with fast build up of Strength
SikaBond®-145 SuperGrip is a premium grade one-component polyurethane construction adhesive with good initial grab and high strength after 30 minutes^. SikaBond®-145 SuperGrip is a versatile, ready to use, fast curing, general purpose construction adhesive suitable for interior and exterior use.
One-component.
Interior & exterior.
Non-shrink.
Usage
SikaBond®-145 SuperGrip is suitable for use in construction and repair applications where a permanent strong bond is required between porous-nonporous surfaces. SikaBond®-145 SuperGrip is suitable for bonding most common construction materials such as:
Wood
MDF
Concrete
Brick
Metal
Polystrene
Polyurethane foam
Some PVC
Marble
Granite
Ceramic
LOSP Timber
Advantages
One-component.
Interior & exterior.
Non-shrink.
Non-sag.
High initial grab.
Adheres rapidly.
Stong bond in 30 minutes^.
Fast cure.
Solvent-free.
Resistant to heat.
Resistant to weathering.
Water resistant -D4 according to DIN En 204
Applies white, can dry translucent if applied in thin layers.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
SikaBond® - PVA is a high solids, one part Cross-linking PVA which meets the D3/BS EN204 specification. SikaBond® - PVA is an ideal product for bonding a wide range of timber components including tongue and groove solid timber and laminated flooring substrates giving tough, flexible permanent bonding.
Uses
SikaBond® -PVA can be used on most substrates due to its excellent adhesion. These include:
Timber
MDF boards
Particle boards
Ply woods
Advantages
- Excellent water resistance
- High bond strength within 24 hours
- Suitable for interior and exterior applications
Storage and Shelf Life
Store in a cool, dry place with 25oC maximum condition. This material will keep for at least twelve (12) months.
Instructions for Use
Surface Preparation Surfaces to be bonded should be clean, dry and free from dust and oil. Edges should be squarely machined to ensure maximum contact.
Application
SikaBond® -PVA is to be applied by squeeze bottle, brush or roller. Bonds should be assembled within a few minutes and then tightly clamped or pressed until the adhesive has set. Wipe off adhesive squeeze out immediately after assembly with a dry or lightly damp cloth.
Assemblies are best left overnight before moving or transportation. Maximum bond strength is achieved within 48 hours. Allow floors 24 hours for the adhesive to cure prior to using. SikaBond® -PVA should be used as supplied.
Cleaning Wipe off adhesive squeeze out immediately after assembly with a dry or lightly damp cloth.
Colour: White
Density: 1.08 kg/L
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Sikaflex®-118 Extreme Grab is a 1- part construction adhesive with very high initial grab which bonds most construction material substrates. Internal and external use.
Very high initial grab
Fixing of heavy objects without temporary fixation
Good workability
Usage
An adhesive to bond most construction components and materials such as:
Concrete
Masonry
Most stones
Ceramic
Wood
Metals
Glass
Mirrors*
Advantages
Very high initial grab
Fixing of heavy objects without temporary fixation
Good workability
Very low emissions
Adhesive-sealant with CE marking
Packaging
290 ml cartridge, 12 cartridges per box
Colour
White
Composition
Silane terminated polymer
Storage conditions
The product must be stored in original, unopened and undamaged sealed packaging in dry conditions at temperatures between +5 °C and +25 °C. Always refer to packaging.
Density
~1.40 kg/l
Technical Information
Shore A hardness
~50 (after 28 d)
Tensile strength
~2.2 N/mm2
Tear propagation resistance
~10.0 N/mm
Service temperature
−40 °C min. / +80 °C max.
SUBSTRATE PREPARATION
The substrate must be sound, clean, dry and free of all contaminants such as dirt, oil, grease, cement laitance, old sealants and poorly bonded paint coatings which could affect adhesion of the adhesive.
For optimum adhesion and critical, high performance applications the following priming and/or pre-treatment procedures shall be followed:
Non-porous substrates
Aluminium, anodised aluminium, stainless steel, galvanised steel, powder coated metals or glazed tiles, slightly roughen surface with a fine abrasive pad. Clean and pre-treat using Sika® Aktivator-205 applied with a clean cloth.
Before bonding / sealing, allow a waiting time of > 15 minutes (< 6 hours).
Other metals, such as copper, brass and titanium-zinc, clean and pre-treat using Sika® Aktivator-205 applied with a clean cloth. After a waiting time of > 15 minutes (< 6 hours). Apply Sika® Primer-3 N applied by brush. Allow a further waiting time of > 30 minutes (< 8 hours) before bonding / sealing.
PVC has to be cleaned and pre-treated using Sika® Primer-215 applied with a brush. Allow a waiting time of > 15 minutes (< 8 hours) before bonding / sealing.
Porous substrates
Concrete, aerated concrete and cement based renders, mortars and bricks, prime surface using Sika® Primer-3 N applied by brush.
Before bonding / sealing, allow a waiting time of > 30 minutes (< 8 hours).
For more detailed advice and instructions contact Sika Technical Services.
Note: Primers are adhesion promoters and not an alternative to improve poor preparation / cleaning of joint surfaces. Primers also improve the long term adhesion performance of a sealed joint.
CLEANING OF EQUIPMENT
Clean all tools and application equipment immediately after use with Sika® Remover-208. Once cured, hardened material can only be removed mechanically.
For cleaning skin use Sika® Hand Wipes.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Multi-purpose adhesive sealant with a wide adhesion range
Sikaflex®-221 is a multi-purpose 1-component polyurethane adhesive / sealant that bonds well to a wide variety of substrates like metals, metal primers and paint coatings (2-component systems), ceramic materials and plastics. It is suitable for making permanent elastic seals.
Bonds well to a wide variety of substrates
Resistant to ageing
Can be sanded and painted
PRODUCT BENEFITS
Bonds well to a wide variety of substrates
Resistant to ageing
Can be sanded and painted
Passes EN45545-2 R1/R7 HL3
Non-corrosive
Low odour
NSF-approved for incidental food contact
Potable water approved (meets AS4020 requirements)
Usage
Sikaflex®-221 bonds well to a wide variety of substrates and is suitable for making permanent elastic seals . Suitable substrate materials are metals, metal primers and paint coatings (2-component systems), ceramic materials and plastics. It is ideally used for internal sealing and simple bonding applications. Seek manufacturer’s advice and perform tests on original substrates before using Sikaflex®-221 on materials prone to stress cracking. This product is suitable for experienced professional users only. Test with actual substrates and conditions have to be performed to ensure adhesion and material compatibility.
Surface preparation
Surfaces must be clean, dry and free from grease, oil and dust.
Surface treatment depends on the specific nature of the substrates and is crucial for a long lasting bond. Suggestions for surface preparation may be found on the current edition of the appropriate Sika® Pre-Treatment Chart. Consider that these suggestions are based on experience and have in any case to be verified by tests on original substrates.
Application
Sikaflex®-221 can be processed between 5 °C and 40 °C but changes in reactivity and application properties have to be considered. The optimum temperature for substrate and sealant is between 15 °C and 25 °C.
Sikaflex®-221 can be processed with hand, pneumatic or electric driven piston guns as well as pump equipment. For advice on selecting and setting up a suitable pump system, contact the System Engineering Department of Sika Industry.
Tooling and finishing
Tooling and finishing must be carried out within the skin time of the sealant. It is recommended using Sika® Tooling Agent N. Other finishing agents must be tested for suitability and compatibility prior the use.
Removal
Uncured Sikaflex®-221 can be removed from tools and equipment with Sika® Remover-208 or another suitable solvent. Once cured, the material can only be removed mechanically. Hands and exposed skin have to be washed immediately using hand wipes such as Sika® Cleaner-350H or a suitable industrial hand cleaner and water. Do not use solvents on skin.
Overpainting
Sikaflex®-221 can be painted after formation of a skin. If the paint requires a baking process, best performance is achieved by allowing the sealant to fully cure first. 1C-PUR and 2C-acrylic based paints are usually suitable. All paints have to be tested by carrying preliminary trials under manufacturing conditions. The elasticity of paints is usually lower than of sealants what could lead to cracking of the paint film in the joint area.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Multi-purpose adhesive sealant with a wide adhesion range
Sikaflex®-221 is a multi-purpose 1-component polyurethane adhesive / sealant that bonds well to a wide variety of substrates like metals, metal primers and paint coatings (2-component systems), ceramic materials and plastics. It is suitable for making permanent elastic seals.
Bonds well to a wide variety of substrates
Resistant to ageing
Can be sanded and painted
PRODUCT BENEFITS
Bonds well to a wide variety of substrates
Resistant to ageing
Can be sanded and painted
Passes EN45545-2 R1/R7 HL3
Non-corrosive
Low odour
NSF-approved for incidental food contact
Potable water approved (meets AS4020 requirements)
Usage
Sikaflex®-221 bonds well to a wide variety of substrates and is suitable for making permanent elastic seals . Suitable substrate materials are metals, metal primers and paint coatings (2-component systems), ceramic materials and plastics. It is ideally used for internal sealing and simple bonding applications. Seek manufacturer’s advice and perform tests on original substrates before using Sikaflex®-221 on materials prone to stress cracking. This product is suitable for experienced professional users only. Test with actual substrates and conditions have to be performed to ensure adhesion and material compatibility.
Surface preparation
Surfaces must be clean, dry and free from grease, oil and dust.
Surface treatment depends on the specific nature of the substrates and is crucial for a long lasting bond. Suggestions for surface preparation may be found on the current edition of the appropriate Sika® Pre-Treatment Chart. Consider that these suggestions are based on experience and have in any case to be verified by tests on original substrates.
Application
Sikaflex®-221 can be processed between 5 °C and 40 °C but changes in reactivity and application properties have to be considered. The optimum temperature for substrate and sealant is between 15 °C and 25 °C.
Sikaflex®-221 can be processed with hand, pneumatic or electric driven piston guns as well as pump equipment. For advice on selecting and setting up a suitable pump system, contact the System Engineering Department of Sika Industry.
Tooling and finishing
Tooling and finishing must be carried out within the skin time of the sealant. It is recommended using Sika® Tooling Agent N. Other finishing agents must be tested for suitability and compatibility prior the use.
Removal
Uncured Sikaflex®-221 can be removed from tools and equipment with Sika® Remover-208 or another suitable solvent. Once cured, the material can only be removed mechanically. Hands and exposed skin have to be washed immediately using hand wipes such as Sika® Cleaner-350H or a suitable industrial hand cleaner and water. Do not use solvents on skin.
Overpainting
Sikaflex®-221 can be painted after formation of a skin. If the paint requires a baking process, best performance is achieved by allowing the sealant to fully cure first. 1C-PUR and 2C-acrylic based paints are usually suitable. All paints have to be tested by carrying preliminary trials under manufacturing conditions. The elasticity of paints is usually lower than of sealants what could lead to cracking of the paint film in the joint area.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Elastic adhesive for vehicle assembly bonding
Sikaflex®-252 is an elastic 1-component polyurethane adhesive especially designed for bonding large components in vehicle assembly. It is suitable for bonding coated metal, GRP, ceramic materials and plastics.
Bonds well to a wide variety of substrates
Capable of withstanding high dynamic stresses
Good gap-filling properties
PRODUCT BENEFITS
Bonds well to a wide variety of substrates
Capable of withstanding high dynamic stresses
Good gap-filling properties
Can be painted
Vibration-damping
Electrically non-conductive
Usage
Sikaflex®-252 is suitable for assemblies that are subject to dynamic stresses. Suitable substrate materials are timber, metals, particularly aluminum (including anodized components), sheet steel (including phosphated, chromated and galvanized components), metal primers and paint coatings (2-component systems), ceramic materials and plastics. Seek manufacturer’s advice before using on plastics that are prone to stress cracking. This product is suitable for professional experienced users only. Tests with actual substrates and conditions have to be performed to ensure adhesion and material compatibility.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
High strength, structural grade polyurethane adhesive sealant
High strength elastic adhesive, suitable for structural joints subjected to high dynamic stress
Suitable for use on trucks, trailers and caravans with excellent adhesion to timber, metals, primers and paint coatings
Vibration dampening
USE
Sikaflex® 252 is suitable for structural joints that will be subjected to dynamic stresses. Suitable substrate materials are timber, metals, particularly aluminium (incl. anodized components), sheet steel (incl. phosphated, chromated and zinc-plated components), metal primers and paint coatings (2-c systems), ceramic materials and plastics.
CHARACTERISTICS AND ADVANTAGES
1-C formulation
Elastic
Can be overpainted
Good gap-filling properties
Capable of withstanding high dynamic stresses
Vibration
Damping
Non-corrosive
Electrically non-conductive
Bonds well to a wide variety of substrates
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Sikaflex®-291 Marine Adhesive Sealant Multifunctional, IMO-Compliant
Sikaflex®-291 is a non-sag, 1-component polyurethane sealant developed for the marine market. It cures on exposure to atmospheric moisture to form a durable, elastic seal. Engineered for demanding on-board environments, Sikaflex®-291 meets International Maritime Organization (IMO) requirements and is suitable for a wide range of sealing and light bonding tasks above and below deck.
Why Choose Sikaflex®-291
Excellent adhesion to common marine substrates
Good ageing & weathering resistance for long service life
Elastic to absorb vibration and movement
Low odour and non-corrosive
Overpaintable and sandable after cure*
Available colours: White, Grey, Black
*Always test paint compatibility. Paint elasticity is typically lower than sealant elasticity and can crack in the joint area.
Typical Uses
Multipurpose sealing and light bonding in marine construction, including elastic, vibration-resistant joints and interior sealing applications.
Suitable Substrates
Wood
Metals, metal primers and 2-component paint systems
Ceramic materials
Plastics such as GRP (fibreglass), etc.
Do Not Use On
Plastics prone to stress cracking (e.g. acrylic/Plexiglas®, polycarbonate)
Professional users only. Always test with actual substrates and site conditions to confirm adhesion and compatibility.
Technical Data (Typical)
Property
Method / Note
Value
Chemical base
—
1-component polyurethane
Cure mechanism
—
Moisture-curing
Colour
CQP001-1
White, Grey, Black
Density (uncured)
—
~1.3 kg/L (colour-dependent)
Non-sag properties
—
Good
Application temperature
Ambient
5 – 40 °C (optimum 15 – 25 °C)
Skin time
CQP019-1 (A)
~60 minutes
Open time
CQP526-1 (A)
~45 minutes
Curing speed
CQP049-1
Depends on temperature & humidity (see TDS)
Shrinkage
CQP014-1
~5 %
Shore A hardness
CQP023-1 / ISO 48-4
~40
Tensile strength
CQP036-1 / ISO 527
~1.8 MPa
Elongation at break
CQP036-1 / ISO 527
~500 %
Tear resistance
CQP045-1 / ISO 34
~6 N/mm
Service temperature (continuous)
CQP513-1
−50 to +90 °C
Service temperature (short-term)
CQP513-1
+160 °C (4 h), +180 °C (1 h)
Shelf life
(B)
12 months (store < 25 °C)
CQP = Corporate Quality Procedure. (A) 23 °C / 50 % r.h. (B) Storage below 25 °C.
Application Guidance
Surface Preparation
Substrates must be clean, dry, and free from grease, oil, and dust. Surface treatment depends on the substrate and is crucial for durability. Refer to the current Sika® Pre-treatment Chart for Marine Applications and verify with tests on original substrates.
Application
Process between 5 °C and 40 °C; reactivity and handling change with temperature and humidity.
Optimum substrate and product temperature is 15 – 25 °C.
Apply with hand, pneumatic, or electric piston guns, or suitable pump equipment.
Tooling & Finishing
Tool within the skin time.
Recommended finishing agent: Sika® Tooling Agent N (test any alternative agent for suitability).
Cleaning & Removal
Uncured material: remove from tools/equipment with Sika® Remover-208 or a suitable solvent.
Cured material: remove mechanically (e.g. knife, wire, abrasion).
Skin/hands: clean immediately with Sika® Cleaner-350H towels or an appropriate industrial hand cleaner and water. Do not use solvents on skin.
Overpainting
Best painted after skin formation; performance can be improved by treating the joint surface with Sika® Aktivator-100 or Sika® Aktivator-205 before painting.
If the paint requires baking > 80 °C, allow the sealant to fully cure first.
Always conduct preliminary trials under manufacturing conditions.
Avoid using enamel, alkyd, and chlorinated rubber paints on the joint area.
Compliance & Approvals
Meets requirements set out by the International Maritime Organization (IMO).
Associated with the marine “Wheelmark” conformity mark under the Marine Equipment Directive (MED) where applicable.
FAQs
Can Sikaflex®-291 be overpainted?
Yes, once cured and after preliminary testing for compatibility. Note that paint elasticity is usually lower than the sealant’s and may crack over the joint. Enamel, alkyd, and chlorinated rubber paints should not be used on the joint area.
What is a “marine grade” sealant/adhesive?
Sika’s marine range is designed for flexible, waterproof, and durable assemblies across vessels from small yachts to large ships, for maintenance and construction tasks above and below the waterline.
When and why should a primer be used?
Primers promote adhesion on certain substrates. Sika® Primer-210 is commonly used prior to applying 1-component polyurethanes like Sikaflex®-291. Always confirm with testing.
What does the Wheelmark indicate?
The Wheelmark symbolizes conformity with marine equipment standards under the EU Marine Equipment Directive (MED).
Which substrates does Sikaflex®-291 bond to?
Wood; metals, metal primers and 2-C paint systems; ceramics; and plastics such as GRP. Avoid plastics prone to stress cracking (e.g. acrylic/Plexiglas®, polycarbonate).
How do I remove Sikaflex®-291?
Uncured: Sika® Hand Wipes or Sika® Remover-208 for tools/surfaces. Cured: mechanical methods (knife, wire, abrasion). Remover-208 will not remove cured material.
Important: Information above is based on typical data. Performance depends on substrate, preparation, joint design, and application conditions. Conduct on-site tests to verify suitability. Always consult the latest Technical Data Sheet (TDS) and Safety Data Sheet (SDS).
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Sikaflex®-291 Marine Adhesive Sealant Multifunctional, IMO-Compliant
Sikaflex®-291 is a non-sag, 1-component polyurethane sealant developed for the marine market. It cures on exposure to atmospheric moisture to form a durable, elastic seal. Engineered for demanding on-board environments, Sikaflex®-291 meets International Maritime Organization (IMO) requirements and is suitable for a wide range of sealing and light bonding tasks above and below deck.
Why Choose Sikaflex®-291
Excellent adhesion to common marine substrates
Good ageing & weathering resistance for long service life
Elastic to absorb vibration and movement
Low odour and non-corrosive
Overpaintable and sandable after cure*
Available colours: White, Grey, Black
*Always test paint compatibility. Paint elasticity is typically lower than sealant elasticity and can crack in the joint area.
Typical Uses
Multipurpose sealing and light bonding in marine construction, including elastic, vibration-resistant joints and interior sealing applications.
Suitable Substrates
Wood
Metals, metal primers and 2-component paint systems
Ceramic materials
Plastics such as GRP (fibreglass), etc.
Do Not Use On
Plastics prone to stress cracking (e.g. acrylic/Plexiglas®, polycarbonate)
Professional users only. Always test with actual substrates and site conditions to confirm adhesion and compatibility.
Technical Data (Typical)
Property
Method / Note
Value
Chemical base
—
1-component polyurethane
Cure mechanism
—
Moisture-curing
Colour
CQP001-1
White, Grey, Black
Density (uncured)
—
~1.3 kg/L (colour-dependent)
Non-sag properties
—
Good
Application temperature
Ambient
5 – 40 °C (optimum 15 – 25 °C)
Skin time
CQP019-1 (A)
~60 minutes
Open time
CQP526-1 (A)
~45 minutes
Curing speed
CQP049-1
Depends on temperature & humidity (see TDS)
Shrinkage
CQP014-1
~5 %
Shore A hardness
CQP023-1 / ISO 48-4
~40
Tensile strength
CQP036-1 / ISO 527
~1.8 MPa
Elongation at break
CQP036-1 / ISO 527
~500 %
Tear resistance
CQP045-1 / ISO 34
~6 N/mm
Service temperature (continuous)
CQP513-1
−50 to +90 °C
Service temperature (short-term)
CQP513-1
+160 °C (4 h), +180 °C (1 h)
Shelf life
(B)
12 months (store < 25 °C)
CQP = Corporate Quality Procedure. (A) 23 °C / 50 % r.h. (B) Storage below 25 °C.
Application Guidance
Surface Preparation
Substrates must be clean, dry, and free from grease, oil, and dust. Surface treatment depends on the substrate and is crucial for durability. Refer to the current Sika® Pre-treatment Chart for Marine Applications and verify with tests on original substrates.
Application
Process between 5 °C and 40 °C; reactivity and handling change with temperature and humidity.
Optimum substrate and product temperature is 15 – 25 °C.
Apply with hand, pneumatic, or electric piston guns, or suitable pump equipment.
Tooling & Finishing
Tool within the skin time.
Recommended finishing agent: Sika® Tooling Agent N (test any alternative agent for suitability).
Cleaning & Removal
Uncured material: remove from tools/equipment with Sika® Remover-208 or a suitable solvent.
Cured material: remove mechanically (e.g. knife, wire, abrasion).
Skin/hands: clean immediately with Sika® Cleaner-350H towels or an appropriate industrial hand cleaner and water. Do not use solvents on skin.
Overpainting
Best painted after skin formation; performance can be improved by treating the joint surface with Sika® Aktivator-100 or Sika® Aktivator-205 before painting.
If the paint requires baking > 80 °C, allow the sealant to fully cure first.
Always conduct preliminary trials under manufacturing conditions.
Avoid using enamel, alkyd, and chlorinated rubber paints on the joint area.
Compliance & Approvals
Meets requirements set out by the International Maritime Organization (IMO).
Associated with the marine “Wheelmark” conformity mark under the Marine Equipment Directive (MED) where applicable.
FAQs
Can Sikaflex®-291 be overpainted?
Yes, once cured and after preliminary testing for compatibility. Note that paint elasticity is usually lower than the sealant’s and may crack over the joint. Enamel, alkyd, and chlorinated rubber paints should not be used on the joint area.
What is a “marine grade” sealant/adhesive?
Sika’s marine range is designed for flexible, waterproof, and durable assemblies across vessels from small yachts to large ships, for maintenance and construction tasks above and below the waterline.
When and why should a primer be used?
Primers promote adhesion on certain substrates. Sika® Primer-210 is commonly used prior to applying 1-component polyurethanes like Sikaflex®-291. Always confirm with testing.
What does the Wheelmark indicate?
The Wheelmark symbolizes conformity with marine equipment standards under the EU Marine Equipment Directive (MED).
Which substrates does Sikaflex®-291 bond to?
Wood; metals, metal primers and 2-C paint systems; ceramics; and plastics such as GRP. Avoid plastics prone to stress cracking (e.g. acrylic/Plexiglas®, polycarbonate).
How do I remove Sikaflex®-291?
Uncured: Sika® Hand Wipes or Sika® Remover-208 for tools/surfaces. Cured: mechanical methods (knife, wire, abrasion). Remover-208 will not remove cured material.
Important: Information above is based on typical data. Performance depends on substrate, preparation, joint design, and application conditions. Conduct on-site tests to verify suitability. Always consult the latest Technical Data Sheet (TDS) and Safety Data Sheet (SDS).
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Sikaflex® Pro+ - Solvent-Free, Highly Flexible Sealant & Adhesive
All new solvent-free, highly flexible, primer-less sealant and adhesive is the one-stop product for any tradesman and handyman's home building or renovation.
Sikaflex® Pro+ is a 1-component moisture curing polyurethane elastic sealant and adhesive that is formulated with Sika’s newly engineered i-Cure technology to provide higher performance, more movement capability, and improved bubble-free curing.
Sika’s new i-Cure technology is user and eco-friendly, with no solvents and a low environmental impact, while maintaining the performance of traditional polyurethane. It is suitable for overpainting with traditional paint coatings. The i-Cure® technology has an early initial set and overcomes bubbling in the sealant while curing, even in extreme conditions.
Sikaflex® Pro+ is a high-performance, interior and exterior elastic joint sealant with excellent water, weather, and ageing resistance. It has many uses, including:
Expansion joints in walls and cladding
Sealing around doors and window frames
Sealing penetrations in walls and floors for pipes
Sealing joints in concrete and masonry elements
Sealant for draught-proofing and general sealing and filling applications
Pro+ can be used on a multitude of applications and common building substrates. It has good adhesion to damp substrates. To name a few, Pro+ can be used on:
Aluminium
Steel
Powder-coated metals or glazed tiles
Concrete, aerated concrete, cement-based renders, mortars, and bricks
Application of Sikaflex® Pro+
Ensure all surfaces are structurally sound, clean, dry, and free from any grease, etc. (The surface can be damp but not wet. If uncertain, apply masking tape to test adhesion. If masking tape sticks to the surface, it's OK to proceed.)
Movement joints must have a minimum width and depth of 5mm. Apply a bond-breaker tape, or backing rod to the base of the joint to prevent 3-sided adhesion. To keep the work clean, apply masking tape to the top edge of the joint on each face.
Cut the nozzle to the required width and gun sealant into the joint. Avoid voids or air entrapment in the joint when applying.
Before the sealant has skinned, tool off with an appropriate spatula to give a smooth finish.
Remove the masking tape and clean up immediately.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Sikaflex®-111 Stick & Seal White: The Multipurpose Adhesive & Sealant
Product Overview
Experience the versatility of Sikaflex®-111 Stick & Seal, a 1-part adhesive and sealant that caters to both internal and external projects.
Key Advantages
Bonds to a plethora of substrates without the need for surface pre-treatment
Excellent adhesion to damp concrete
Compatible with a multitude of construction materials
Strong mechanical and weathering resistance
CE Marking for quality assurance
Usage
Sikaflex®-111 is perfect for bonding and sealing the following materials:
Concrete
Masonry
Most stones
Ceramic
Wood
Metal
Glass
Various Plastics
Packaging
Available in 290 ml cartridges, 12 per box.
Application Instructions
Ensure the substrate is clean and free of contaminants for optimum adhesion. For detailed application instructions, please contact Sika Technical Services.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
SikaSeal® Super-200 is great for sealing of connection joints with moderate movement
Good UV resistance
Low odour
For exterior and interior use
USE
Sealing of connection joints with moderate movement around windows, window sills, doors, PVC pipes, dry partition walls and ceiling
Filling of cracks on interior and exterior walls (with no permanent water immersion)
CHARACTERISTICS AND ADVANTAGES
For exterior and interior use
High movement capability ±12.5%
Good UV resistance
Solvent-free, low odour
Overpaintable
Very good adhesion on most construction materials such as concrete, plaster, wood
Possible storage at -10°C for short period of time (max 24h)
Conforms to EN 15651-1 F INT EXT
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
SikaSeal® Roof & Gutter Silicone Sealant
Product Type: 1-component neutral cure roof and gutter silicone sealant
Product Overview
SikaSeal® Roof & Gutter is a versatile, one-component, neutral curing silicone sealant designed for use in roofing and guttering applications. This sealant offers excellent adhesion to a variety of construction materials and is ideal for sealing roofs, gutters, and plumbing fixtures, both for exterior and interior applications. It cures quickly and provides a flexible, waterproof seal with superior temperature resistance.
Key Features
Neutral cure, low odour formula
Excellent adhesion to common construction materials such as glass, metals, ceramics, tiles, plastics, concrete, and rubber
Fast curing with a non-sag formula for easy application
Interior and exterior use with a temperature resistance range of -40°C to +150°C
High movement capability (±25% for translucent, ±50% for coloured variants)
Waterproof seal for durable, long-lasting performance
Non-toxic and water-potable approved per AS/NZS 4020:2018
Applications
SikaSeal® Roof & Gutter is ideal for:
Roof and gutter sealing
Sealing polycarbonate roof sheeting
General sealing around plumbing fixtures and penetrations
Sealing interior and exterior joints
Specifications
Packaging
300ml cartridge
Shelf Life
12 months (if stored properly)
Colours Available
Translucent, Grey, White, Black
Density
Translucent: ~1.02 kg/l, Colours: ~1.39 kg/l
Shore A Hardness
Translucent: ~26, Colours: ~46
Elongation at Break
Translucent: ~250%, Colours: ~310%
Movement Capability
Translucent: ±25%, Colours: ±50%
Service Temperature
-40°C to +150°C
Application Instructions
Ensure the substrate is clean, dry, and free from oils, grease, dust, and other contaminants. For optimal adhesion, follow the recommended priming procedures based on the substrate type (non-porous or porous). Apply SikaSeal® Roof & Gutter using a sealant gun, ensuring full contact with the joint sides. Tool the sealant immediately after application for a smooth, durable finish.
Important Considerations
Do not apply on natural stone or bituminous substrates
Not recommended for use under water pressure or in permanent water immersion
Pre-test required on stressed polyacrylate and polycarbonate materials
May cause discoloration on light-colored silicone when exposed to UV radiation (this does not affect the product's performance)
Not suitable for use in confined spaces with no air circulation (requires atmospheric moisture to cure)
Packaging & Storage
Store in the original, unopened packaging in a dry location between +5°C and +25°C. Shelf life is 12 months from the production date under proper storage conditions.
Contact & Ordering
For more information or to place an order, contact us at admin@gluesaustralia.com.au
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
SIKASIL® -670 FIRE | JOINT SEALANT
Fire-rated joint sealant
Up to 4 hours fire resistance according to EN 1366-4
Very good resistance to weathering
Easy to smooth and very good workability
DESCRIPTION
Sikasil®-670 Fire is a fire-rated, 1-component, moisture-curing, low-modulus elastic joint sealant.
USES
Sikasil®-670 Fire is designed for fire rated movement
and connection joints on porous and non-porous substrates.
CHARACTERISTICS / ADVANTAGES
▪ Up to 4 hours fire resistance according to EN 1366-4
▪ Very good resistance to weathering
▪ Movement capability of ± 35% (ASTM C 719)
▪ Easy to smooth and very good workability
▪ Good adhesion to many different substrates
▪ Neutral curing
ENVIRONMENTAL INFORMATION
▪ LEED® EQc 4.1
▪ SCAQMD, Rule 1168
▪ BAAQMD, Reg. 8, Rule 51
APPROVALS / STANDARDS
▪ EN 15651-1 F EXT-INT CC 25 LM
▪ EN 15651-4 PW INT
▪ ISO 11600 F 25 LM & G 25 LM
▪ ASTM C 920, class 35
▪ EN 1366-4 assessment report
▪ ETAG 026 assessment report
▪ EN 13501-2 classification report
▪ EN 140-3
▪ EN 13501-1 class B-s2-d0
PRODUCT INFORMATION
Chemical Base Neutral cure silicone
Colour: Grey
Storage Conditions Sikasil®-670 Fire shall be stored in dry conditions, where it is protected from direct sunlight and at temperatures between +5 °C and +25 °C.
Density 1.35 kg/l approx. (ISO 1183-1)
TECHNICAL INFORMATION
Shore A Hardness 16 approx. (after 28 days) (ISO 868)
Secant Tensile Modulus 0.30 N/mm2 approx. at 100% elongation (23 °C) (ISO 8339)
0.50 N/mm2 approx. at 100% elongation (−20 °C)
Elongation at Break 650% approx. (ISO 37)
Elastic Recovery 70% approx. (ISO 7389)
Tear Propagation Resistance 4.0 N/mm approx. (ISO 34)
Movement Capability ±25% (ISO 9047) ±35% (ASTM C 719)
Service Temperature −40 °C to +150 °C
Joint Design The joint width must be designed to suit the joint movement required and the movement capability of the sealant. The joint width shall be ≥ 10 mm and ≤ 40 mm. The joint depth shall be ≤ 20 mm. A width to depth ratio of 2:1 must be maintained (for exceptions, see table below).
Backing Material Use polyethylene foam backing rods.
Sag Flow 2 mm approx. (20 mm profile, 50 °C) (ISO 7390)
Ambient Air Temperature +5 °C to +40 °C, min. 3 °C above dew point temperature
Substrate Temperature +5 °C to +40 °C
Curing Rate 2 mm/24 hours approx. (23 °C / 50% r.h.) (CQP 049-2)
Skin Time 25 minutes approx. (23 °C / 50% r.h.) (CQP 019-1)
Tooling Time 20 minutes approx. (23 °C / 50% r.h.) (CQP 019-2)
APPLICATION INSTRUCTIONS
SUBSTRATE PREPARATION
The substrate must be clean, dry, sound and homogeneous, free from oils, grease, dust and loose or friable particles. Sikasil®-670 Fire adheres without
primers and/or activators
APPLICATION METHOD / TOOLS
Sikasil®-670 Fire is supplied ready to use.
After the necessary substrate preparation, insert a suitable backing rod to the required depth and apply any primer if necessary. Insert a foil pack or cartridge into the sealant gun and extrude Sikasil®-670 Fire into the joint making sure that it comes into full contact with the sides of the joint and avoids any air entrapment. Sikasil®-670 Fire sealant must be firmly tooled against the joint sides to ensure adequate adhesion. It is recommended to use masking tape where exact joint lines or neat lines are required. Remove the tape within the skin time. Do not use tooling products containing solvents.
CLEANING OF TOOLS
Clean all tools and application equipment immediately after use with Sika® Remover-208 and/or Sika® TopClean T. Once cured, residual material can only be removed mechanically.
FURTHER DOCUMENTS
▪ Safety Data Sheet (SDS)
▪ EN 13501-2 classification report
▪ ETAG 026 assessment report
▪ Brochure Sika Fire Protection Solutions
LIMITATIONS
▪ Sikasil®-670 Fire cannot be overpainted.
Colour variations may occur due to exposure to chemicals, high temperatures and/or UV-radiation (especially with the colour shade white). However, a change in colour is purely of aesthetic nature and does not adversely influence the technical performance or durability of the product.
▪ Do not use Sikasil®-670 Fire on natural stone.
Do not use Sikasil®-670 Fire on bituminous substrates, natural rubber, EPDM rubber or on any building materials which might bleed oils, plasticizers or solvents that could attack the sealant.
▪ Do not use Sikasil®-670 Fire to seal joints in and around swimming pools.
▪ Do not use Sikasil®-670 Fire for joints under water pressure or for permanent water immersion.
▪ Do not expose uncured Sikasil®-670 Fire to alcohol-containing products as this may interfere with the curing reaction.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
SikaTitan®
258 is a primerless to windscreen, one-component direct glazing adhesive. It is easy to apply and has a paste-like consistency. On exposure to atmospheric moisture it cures to a durable elastomer. SikaTitan® -258 provides a long tack-free time and ensures a safe application even under warm conditions. Note: Primerless application requires the glass to be prepared with a non-antistatic glass cleaner.
Also the bonding surfaces must be free of contamination prior to the application of the adhesive. SikaTitan® -258 is manufactured in accordance with ISO 9001 / 14001 quality assurance system and with the responsible care program.
Product Benefits
- Primerless to glass
- One-component formulation
- Cold application
- Good application properties such as bead stability / good non-sag properties
- Short cut-off string
- Tested according to FMVSS 212/208 (with double-side airbags, no seatbelts)
Areas of Application
SikaTitan® -258 is suitable for direct-glazing applications in the Automotive Glass Replacement business. With its good performance and application properties it is suitable for mobile as well as inhouse installations.This product is to be used by professional experienced fitters only. If this product is used for other applications than Automotive Glass Replacement, trials must be carried out prior to use.
Technical Product Data
Chemical base 1-C polyurethane
Colour (CQP1) 001-1) Black
Cure mechanism Moisture-curing
Density (uncured) (CQP 006-4) 1.1 kg/l approx.
Non-sag properties (CQP 061-1) Good
Application temperature +5 to +40°C Skin time2)
(CQP 019-1) 40min. approx.
Open time2)
(CQP 526-1) 30min. approx.
Curing speed(CQP 049-1)
Shore A hardness (CQP 023-1 / ISO 868) 51 approx.
Tensile strength (CQP 036-1 / ISO 37) 5 MPa approx.
Elongation at break (CQP 036-1 / ISO 37) 650% approx.
Tensile lap-shear strength (CQP 046-1 / ISO 4587) 2.5 MPa approx.
Safe Drive-Away Time2)
(cars) with double side airbag
according to FMVSS 212 / 208 (CQP 511-1) without airbag
6 hours
2 hours
Chemical Resistance
SikaTitan® -258 is resistant to fresh water, seawater, limewater, sewage effluent, diluted acids and caustic solutions; temporarily resistant to fuels, mineral oils, vegetable and animal fats and oils; not resistant to organic acids and caustic solutions or solvents.
Method of Application
Removal of old glass
Remove damaged glass in accordance with the vehicle manufacturer’s instructions.
Surface preparation
Surfaces must be clean, dry and free from dust and grease. The bond faces must be prepared with a non-antistatic glass cleaner.
Bonding surface must be free of contaminants before application of the product. Windshields without ceramic coatings need additional UV protection.
Application
Cut off the tip of the nozzle in accordance with the vehicle manufacturer's recommendations and screw onto the cartridge. It is recommended to apply the adhesive with a piston-type application gun. To ensure a uniform thickness of adhesive bead, we recommend that the adhesive be applied in the form of a triangular bead (see fig. 1 below).
The substrate temperature must be between 5°C and 35°C.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
SikaSeal®-401 Aquarium
Premium one-component aquatic life safe silicone sealant
SikaSeal® 401 Aquarium is a premium one-component room temperature vulcanising (RTV) silicone rubber that is safe for aquatic life and designed for sealing applications in aquariums, ponds and water pumps. It adheres very well to glass and aluminium, is UV resistant and has excellent gap filling properties.
Extreme temperature resistance (-50°c to +250°c)
Excellent vibration, UV and weathering resistance
Good gap filling properties
Usage
Fish tanks
Water pumps
Aluminium
Glass
Advantages
Extreme temperature resistance (-50°c to +250°c)
Excellent vibration, UV and weathering resistance
Good gap filling properties
Highly versatile
Easy to apply
Aquarium safe
Composition
1-C Silicone (acetoxy)
Shelf life
18 months from date of production if in undamaged and unopened original sealed containers and stored according to the storage conditions.
Storage conditions
Must be stored in dry conditions and protected from direct sunlight at temperatures between +10ºC and +25ºC.
Density
~1.02 kg/l
Application
Application steps
SUBSTRATE PREPARATION
Ensure all surfaces are clean, dry and free from dust, grease and loose material. Remove all old gasket material from mating surfaces before cleaning with a residue free solvent and allow to completely dry.
CLEANING OF EQUIPMENT
Uncured, excess SikaSeal® 401 Aquarium may be removed with Sika® Remover- 208 or another suitable solvent. Once cured, the excess sealant can be trimmed away from the edges with a knife.
PRODUCT INFORMATION
Composition 1-C Silicone (acetoxy)
Packaging 75g Tube, 12 Tube per box
Colour Clear
Shelf life 18 months from date of production if in undamaged and unopened original sealed containers and stored according to the storage conditions.
Storage conditions Must be stored in dry conditions and protected from direct sunlight at
temperatures between +10ºC and +25ºC.
Density ~1.02 kg/l
Shore A Hardness ~23
Tensile Strength 1.0 N/mm2
Secant Tensile Modulus 1.1 n/mm2
Elongation at Break ~500%
Ambient Air Temperature +5°c to +45°c
Curing Rate ~3mm per 24 hours
Skinning time ~7-10 minutes
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
SikaBond is a high strength contact adhesive that will not slump on vertical surfaces. It can be used as a one way liquid adhesive, or a two way contact adhesive, on a variety of surfaces.
Uses SikaBond can be used on most substrates due to its excellent adhesion.
These include:
Floor and wall panels.
Wood, plasterboard and chipboard.
Aluminium, iron and steel.
Concrete, cement sheeting and masonry.
Advantages
One component ready to use.
Fast drying time.
Easy to use.
High adhesion strength.
Non-slump.
Storage and Shelf Life
Stored in the original sealed packaging at temperatures of between 5ºC and 35ºC, this material will keep for at least twelve (12) months.
Instructions for Use
Surface Preparation All surfaces must be clean, sound, dry and free of oil, grease and surface contamination. Thoroughly remove all loose particles and dust. Any loose flaking must be removed and light sanding is recommended.
Application
One Way Method:
This method is recommended for heavier panels or where load or stress is expected. Apply a 4 to 6mm bead of SikaBond using a cartridge gun, making sure the beads are no more than 45cm apart. Bring both substrates immediately together and clamp, nail or screw for a minimum of 24 hours. For butt joints use adhesive on both panel edges.
Two Way Method:
Apply adhesive as in one way method, bring together substrates, and press firmly over entire surface to transfer adhesive. Then pull apart. Allow adhesive to tack off for 3 to 5 minutes depending on weather conditions, reposition the objects and press together firmly. The surfaces should be tapped together with a hammer and a padded block to ensure maximum contact. Maximum bond strength will be achieved in 12 to 72 hours, depending on substrates and weather. Heavy panels may require temporary mechanical fastening until maximum strength is achieved.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Instant set, high viscosity, multipurpose super glue
Suitable for bonding substrates with irregular surfaces and in vertical applications
Super high strength bond to most plastics, rubber, timber, ceramics, paper, card, leather and metals
Controlled dosage applicator nozzle
Use:
As an instant setting adhesive for small bonding jobs such as bonding most metals, plastics, rubber, fabrics, wood, paper and other materials
Can be used on porous substrates such as porcelain and china
Small repairs to glasses, bonded shoe soles, picture frames, ceramics, toys and small electronic equipment, etc.
Surfaces with small irregularities max. 0.5 mm
On vertical surfaces
Characteristics and Advantages
One Component
Easy to apply, non-sag, gel consistency
Very rapid, tenacious bond to numerous substrates, e.g., plastics, rubber, metals, wood, ceramics, paper, card
Low consumption adhesive
Versatile, allows adhesion between different materials
Colourless
Durable
Packaging
3 g Tube
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
SikaBond Fast is a premium, water-based, multi-purpose construction adhesive providing strong initial grab and high bond strength.
Uses:
SikaBond Fast can be used on most substrates due to its excellent adhesion.
These include:
- Fixing polystyrene wall panels
- Replacing loose tiles on walls
- Skirting boards, architraves and trims to walls
- Bonding panels to wall studs
- Bonding particleboard, plywood, fibre cement and strip flooring to joists
Advantages :
- Complies to AS2329-1980, “Mastic Adhesives for Fixing Wallboards”
- Natural wood colour
- Reduces the number of mechanical fasteners required to install floors or walls.
- Can be repositioned for up to 60 minutes after application
- Reduces squeaking associated with nail ride in floors
- Paintable with water-based surface coatings
- Easy to use one component
- Bridges gaps up to 9 mm
- Strong adhesion to metal
- No fumes
- High bond strength and heat resistance
- Flows easily at all temperatures
- Easy cleanup
- Fast initial grab – minimises slippage on vertical surfaces
Storage and Shelf Life
Stored in the original sealed packaging at temperatures of between 5oC and 35oC, this material will keep for at least two (2) years.
Instructions for Use
Surface Preparation All surfaces must be clean, sound, dry and free of oil, grease and surface contamination. Thoroughly remove all loose particles and dust. Any loose flaking material must be removed and light sanding is recommended. SikaBond Fast will adhere to damp (not wet) substrates but drying times may increase. Substrates should be above 5ºC. Do not bond 2 non-porous substrates ensure that one surface is porous.
Application
Apply a 5 mm bead of SikaBond Fast to one surface using a cartridge gun; ensure the beads are no more than 45cm apart. Bring both substrates immediately together and clamp, nail or screw for a minimum of 24 hours. For butt joints use adhesive on both panel edges.
Cleaning
The uncured material can be cleaned with water. The hardened material can only be removed by mechanical means.
Technical Data (Typical)
Colour Pale Brown
Specific Gravity ~ 1.4
Skinning Time 20 minutes
Repositioning Time 60 minutes
Full Cure 24 hours depending on conditions
When both surfaces are porous firm, a slip-resistant bond will develop after 15 minutes at 30ºC and 60 minutes at 10ºC. Should one surface be non-porous or the substrate damp, a firm slip resistant bond will be achieved in approximately 8 hours. After 24 hours, 90% of the final strength will be achieved. (dependant on temperature, the porosity of the substrates, humidity and ventilation).
Service temperature -5ºC to +90ºC
Packaging 420 gram cartridge (12 cartridges per box)
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
SikaBond® - PVA is a high solids, one part Cross-linking PVA which meets the D3/BS EN204 specification. SikaBond® - PVA is an ideal product for bonding a wide range of timber components including tongue and groove solid timber and laminated flooring substrates giving tough, flexible permanent bonding.
Uses
SikaBond® -PVA can be used on most substrates due to its excellent adhesion. These include:
Timber
MDF boards
Particle boards
Ply woods
Advantages
- Excellent water resistance
- High bond strength within 24 hours
- Suitable for interior and exterior applications
Storage and Shelf Life
Store in a cool, dry place with 25oC maximum condition. This material will keep for at least twelve (12) months.
Instructions for Use
Surface Preparation Surfaces to be bonded should be clean, dry and free from dust and oil. Edges should be squarely machined to ensure maximum contact.
Application
SikaBond® -PVA is to be applied by squeeze bottle, brush or roller. Bonds should be assembled within a few minutes and then tightly clamped or pressed until the adhesive has set. Wipe off adhesive squeeze out immediately after assembly with a dry or lightly damp cloth.
Assemblies are best left overnight before moving or transportation. Maximum bond strength is achieved within 48 hours. Allow floors 24 hours for the adhesive to cure prior to using. SikaBond® -PVA should be used as supplied.
Cleaning Wipe off adhesive squeeze out immediately after assembly with a dry or lightly damp cloth.
Colour: White
Density: 1.08 kg/L
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
SikaBond® -TechGrip is a high strength multipurpose, polyurethane glue that provides a super strong bond to almost any substrate and is ideal for woodworking and project work.
Uses
SikaBond® -TechGrip can be used on most substrates due to its excellent adhesion. These include:
Wood
Stone
Metals
Glass
Ceramics
Concrete
Brick
Masonry
Advantages
Waterproof
Resistant to solvents and chemicals
Paintable with water based and solvent based paints
High adhesion strength
Storage and Shelf Life
Store in a cool, dry place with 25C maximum condition. This material will keep for at least twelve (12) months.
Instructions for Use
Surface Preparation Ensure all surfaces are clean, dry, oil and dust free and that one surface is porous. (SikaBond® -TechGrip works best when both surfaces are porous).
Application
Apply sparingly to one surface and bring surfaces together within 15 minutes. Secure/clamp for 3-4 hours. Wipe excess away with a cloth to limit sanding after cure. Allow 24 hours for full cure. As glue will foam a little while curing, wipe off excess with a cloth to limit sanding and painting. Slightly dampen dry timber surfaces to improve bond and accelerate cure. Cleaning Wipe nozzle and cap of bottle after use and dispose of any unused material in accordance with local authority regulations.
Colour: Brown
Density 1.11 kg/litre approx.
Bond Strength Tensile Strength - 3030kpa
Test Substrate - Timber: End grain to end grain
Viscosity 6,000cps
Handling Precautions
Avoid contact with skin and eyes.
Wear protective gloves and eye protection during work.
If skin contact occurs, wash skin thoroughly.
If in eyes, hold eyes open, flood with warm water, seek medical attention without delay.
A full Material Safety Data sheet is available from Sika on request.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
SikaBond® -TechGrip is a high strength multipurpose, polyurethane glue that provides a super strong bond to almost any substrate and is ideal for woodworking and project work.
Uses
SikaBond® -TechGrip can be used on most substrates due to its excellent adhesion. These include:
Wood
Stone
Metals
Glass
Ceramics
Concrete
Brick
Masonry
Advantages
Waterproof
Resistant to solvents and chemicals
Paintable with water based and solvent based paints
High adhesion strength
Storage and Shelf Life
Store in a cool, dry place with 25C maximum condition. This material will keep for at least twelve (12) months.
Instructions for Use
Surface Preparation Ensure all surfaces are clean, dry, oil and dust free and that one surface is porous. (SikaBond® -TechGrip works best when both surfaces are porous).
Application
Apply sparingly to one surface and bring surfaces together within 15 minutes. Secure/clamp for 3-4 hours. Wipe excess away with a cloth to limit sanding after cure. Allow 24 hours for full cure. As glue will foam a little while curing, wipe off excess with a cloth to limit sanding and painting. Slightly dampen dry timber surfaces to improve bond and accelerate cure. Cleaning Wipe nozzle and cap of bottle after use and dispose of any unused material in accordance with local authority regulations.
Colour: Brown
Density 1.11 kg/litre approx.
Bond Strength Tensile Strength - 3030kpa
Test Substrate - Timber: End grain to end grain
Viscosity 6,000cps
Handling Precautions
Avoid contact with skin and eyes.
Wear protective gloves and eye protection during work.
If skin contact occurs, wash skin thoroughly.
If in eyes, hold eyes open, flood with warm water, seek medical attention without delay.
A full Material Safety Data sheet is available from Sika on request.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
SikaBond® SprayFix: The Ultimate Aerosol Spray Adhesive for Multipurpose Use
High-Performance, Fast-Drying, & Repositionable Adhesive
SikaBond® SprayFix is your go-to aerosol spray adhesive for both temporary and permanent bonding. With its high performance, low odour, and fast-drying time, it's designed for your convenience.
Key Advantages:
Easy to use
Low odour
Dries clear
Fast drying time (approximately 2-4 minutes)
High initial strength
Contains no chlorinated solvents - suitable for indoor use
Repositionable for 1-2 minutes
Applications Include:
Upholstery
Floor Repairs
Furniture Lamination
Art and Crafts (e.g., mounting prints)
Suitable Substrates:
Felts and Fabrics
Metals
Foams
Cork
Most Plastics
Rubber Gaskets
Fibreglass
Wood (e.g., plywood, particle board)
How to Use:
Ensure the surface is clean, dry, and free of dust and grease.
Shake the can well before use.
Hold the can approximately 80-100 mm from the surface and spray lightly.
Allow a few minutes for drying.
Packaging:
Available in 150g and 350g aerosol cans.
Color:
White when applied, clear when dry.
Cleaning of Equipment:
After use, invert the can and press the tip until clear propellant comes out for cleaning. Uncured overspray can be removed with Sika® Colma Cleaner or another suitable solvent.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Introducing Sika SikaFlex 227: Your All-in-One Car Body Sealant
Product Highlights
Fast Skinning
Low Odour
Paintable and Sandable
Resistant to Ageing
Silicone-Free
Product Usage
Perfect for sealing, seam sealing, simple bonding, vibration reduction, and sound deadening in car body repair and construction.
Compatibility
Works well with metal primers, paint coatings, metals, and plastics. Always test before use on new substrates.
Packaging
Comes in a 310 ml cartridge for easy application.
Technical Specifications
Cure Mechanism: Moisture-curing
Application Temperature: 535°C
Shelf Life: 12 months when stored below 25°C
Application and Removal
For detailed application and removal guidelines, consult the manufacturer's manual.
Precautions
This product is intended for use by experienced professionals. Always perform tests for compatibility.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Introducing Sika SikaFlex 227: Your All-in-One Car Body Sealant
Product Highlights
Fast Skinning
Low Odour
Paintable and Sandable
Resistant to Ageing
Silicone-Free
Product Usage
Perfect for sealing, seam sealing, simple bonding, vibration reduction, and sound deadening in car body repair and construction.
Compatibility
Works well with metal primers, paint coatings, metals, and plastics. Always test before use on new substrates.
Packaging
Comes in a 310 ml cartridge for easy application.
Technical Specifications
Cure Mechanism: Moisture-curing
Application Temperature: 535°C
Shelf Life: 12 months when stored below 25°C
Application and Removal
For detailed application and removal guidelines, consult the manufacturer's manual.
Precautions
This product is intended for use by experienced professionals. Always perform tests for compatibility.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
One-component, solvent-free, multipurpose adhesive and sealant with a crystal clear appearance suitable for most surfaces
100% crystal clear / transparent
Good workability
Very good adhesion on many typical building materials
Use:
Sikaflex® Crystal Clear is designed as a multipurpose adhesive and is suitable for most surfaces including:
Plasterboard
Wood surfaces
Painted enamel
Polyester
Plastic
Sikaflex® Crystal Clear is designed as a sealant for vertical and horizontal indoor connection joints between partition walls, for metal and wood constructions.
CHARACTERISTICS AND ADVANTAGES
100% crystal clear / transparent
Good workability
Low shrinkage during cure
Flexible and elastic
Can be used on damp concrete
Very good adhesion on many typical building materials
COLOUR: Transparent
Product Data
Appearance / Colours Transparent
Packaging 300 g cartridge (290 ml), 12 cartridges per box
Storage Conditions / Shelf-Life
Sikaflex® Crystal Clear has a shelf life of 12 months from the date of production, if it is stored properly in undamaged, original, sealed packaging, and if the storage conditions are met.
Technical Data
Chemical Base Silane terminated polymer
Density 1.05 kg/l approx. (ISO 1183-1)
Tensile Strength 2.0 N/mm2 approx. (ISO 37)
Shore A Hardness 30 approx. (after 28 days) (ISO 868)
Elongation at Break 400% approx. (ISO 37)
Elastic Recovery 70% approx. (ISO 7389)
Tear Propagation
Resistance
4.0 N/mm approx. (ISO 34)
Service Temperature −40 °C to +70 °C
SUBSTRATE PREPARATION
The substrate must be clean, dry, sound and homogeneous, free from oils, grease, dust and loose or friable particles. Sikaflex® Crystal Clear adheres without primers and/or activators. However, for optimum adhesion and critical, high performance applications,
such as on multi-story buildings, highly stressed joints, extreme weather exposure or water immersion, the following priming and/or pretreatment procedures shall be followed:
Non-porous substrates
Aluminium, anodised aluminium, stainless steel, PVC, galvanised steel, powder coated metals or glazed tiles have to be cleaned and pre-treated using Sika® Aktivator-205, wiped on with a clean towel. Before sealing, allow a flash-off time of > 15 minutes (< 6 hours). Other metals, such as copper, brass and titanium-zinc, also have to be cleaned and pre-treated using Sika® Aktivator-205,wiped on with a clean towel. After the necessary flash-off time, use a brush to apply Sika® Primer-3 N and allow a further flash-off time of > 30minutes (< 8 hours) before sealing the joints.
Porous substrates
Concrete, aerated concrete and cement based renders, mortars and bricks shall be primed using Sika® Primer-3 N applied with a brush. Before sealing, allow a flash-off time of > 30 minutes (< 8 hours).For more detailed advice and instructions please contact the local Sika Technical Services Department.
Note: Primers are adhesion promoters. They are neither a substitute for the correct cleaning of a surface, nor do they improve the strength of the surface significantly.
Bonding
After substrate preparation, apply Sikaflex® Crystal Clear in beads, strips or spots to the bonding surface in intervals of a few centimetres each. Use hand pressure only to set the element to be bonded into position. If necessary, use SikaTack® Panel Tape during the initial hours of curing. An incorrectly positioned element can easily be unfastened and repositioned during the first few minutes after application. Apply pressure again.
Optimum bonding will be obtained after the complete curing of Sikaflex® Crystal Clear. The recommended adhesive layer thickness (depending on surface evenness) is ≤3 mm. Fresh, uncured adhesive remaining on the surface must be removed immediately. Final strength will be obtained after complete curing of Sikaflex® Crystal Clear.
Sealing
After the necessary substrate preparation, insert a suitable backing rod to the required depth and apply any primer if necessary. Insert a cartridge into the sealant gun and extrude Sikaflex® Crystal Clear into the joint making sure that it comes into full contact with the sides of the joint and avoids any air entrapment. Sikaflex® Crystal Clear sealant must be firmly tooled against the joint sides to ensure adequate adhesion. It is recommended to use masking tape where exact joint lines or neat lines are required. Remove the tape within the skin time. Do not use tooling products containing solvents.
Cleaning of Tools Clean all tools and application equipment immediately after use with Sika® Remover-208 and/or Sika® Wonder Wipes. Once cured, residual material can only be removed mechanically.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Sikaflex-227 is a one-component polyurethane sealant designed for car body construction, curing on exposure to atmospheric moisture to form a durable elastomer.
USESikaflex-227 is suitable for sealing, seam sealing, simple bonding as well as for vibration reduction and sound deadening measures in crash body repair and car body construction.
Suitable substrate materials are metal primers and paint coatings (two-part systems), metals, painted plastics and plastics.
CHARACTERISTICS AND ADVANTAGESOEM approved qualityFast over-paintableResistant to ageingLow odourCan be sandedBonds well to a wide variety of substratesShort cut-off stringOverhead work possibleFast curingSilicone free
Product Benefits- Adheres to a wide range of substrates, without primer in many cases- Exhibits tenacious adhesion to aluminium, FRP, steel, wood, SMC, RIM, prepainted metals, ZINCALUME, Zincgrip, and aluminized steel, without attacking the metal coating- Fast tack free time- Cures rapidly to an elastic consistency with excellent cut and tear resistance- Low odour, non-staining- Paintable- Weather resistant- Resistant to road salts
Areas of Application- Sealing exterior lap seams in many applications, including truck trailers, RV's, metal roofs, window perimeters, grain bins and HVAC units- Sealing rivet seams- Sealing of exposed and concealed joints of aluminium, steel, coated metals, wood, roof rails, and door hinges in transport equipment- Sealing and caulking expansion joints- May be suitable for use on a wide variety of substrates; including aluminium, steel, glass, wood, metal primers and paint coating (2-c systems), metals, painted plastics and many different types of plastic.
Cure MechanismSikaflex®-227 cures by reaction with atmospheric moisture. At low temperatures, the water content of the air is generally lower and the curing reaction proceeds somewhat slower
Chemical ResistanceSikaflex®-227 is resistant to fresh water, aqueous cleaning solutions; temporarily resistant to fuels, mineral oils, vegetable and animal fats and oils; not resistant to organic and mineral acids, alcohol, and caustic solutions or solvents. The above information is offered for general guidance only.
Method of ApplicationSurface preparationSurfaces must be clean, dry and free from all traces of grease, oil and dust. As a rule, the substrates must be prepared in accordance with the instructions given in the current Sika Pre-Treatment Chart.
ApplicationCartridges: Cut tip to joint size.Puncture airtight seal. Install with hand or power operated gun.Unipacks: Place unipack in the application gun and snip off the closure clip. Cut off the tip of the nozzle to suit joint width and gun the sealant into the joint with a suitable compressed air or hand operated gun, taking care to avoid air entrapment. Once opened, packs should be used up within a relatively short space of time. Do not apply at temperatures below 40°F (5°C) or above 100°F (38°C). The optimum temperature for substrate and sealant is between 60°F (15°C) and 77°F (25°C). For advice on selecting and setting up a suitable pump system, please contact the System Engineering Department.
Tooling and finishingTooling and finishing must be carried out within the tack-free time of the sealant. Finishing agents or lubricants must be tested for suitability/ compatibility.
RemovalUncured Sikaflex®-227 can be removed from tools and equipment with Sika® Remover-208 or another suitable solvent. Once cured, the material can only be removed mechanically. Strictly follow the solvent manufacturer's instructions for use and warnings.Hands and exposed skin should be washed immediately using a suitable industrial hand cleaner and water. Do not use solvents on the skin!
OverpaintingSikaflex®-227 can be overpainted when tack-free. The paint and paint process must be tested for compatibility by carrying out preliminary trials. Sikaflex®-227 should not be exposed to baking temperatures until it has attained a full cure. It should be understood that the hardness and film thickness of the paint may impair the elasticity of the sealant and lead to cracking of the paint film with time.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Sikaflex-227 is a one-component polyurethane sealant designed for car body construction, curing on exposure to atmospheric moisture to form a durable elastomer.
USESikaflex-227 is suitable for sealing, seam sealing, simple bonding as well as for vibration reduction and sound deadening measures in crash body repair and car body construction.
Suitable substrate materials are metal primers and paint coatings (two-part systems), metals, painted plastics and plastics.
CHARACTERISTICS AND ADVANTAGESOEM approved qualityFast over-paintableResistant to ageingLow odourCan be sandedBonds well to a wide variety of substratesShort cut-off stringOverhead work possibleFast curingSilicone free
Product Benefits- Adheres to a wide range of substrates, without primer in many cases- Exhibits tenacious adhesion to aluminium, FRP, steel, wood, SMC, RIM, prepainted metals, ZINCALUME, Zincgrip, and aluminized steel, without attacking the metal coating- Fast tack free time- Cures rapidly to an elastic consistency with excellent cut and tear resistance- Low odour, non-staining- Paintable- Weather resistant- Resistant to road salts
Areas of Application- Sealing exterior lap seams in many applications, including truck trailers, RV's, metal roofs, window perimeters, grain bins and HVAC units- Sealing rivet seams- Sealing of exposed and concealed joints of aluminium, steel, coated metals, wood, roof rails, and door hinges in transport equipment- Sealing and caulking expansion joints- May be suitable for use on a wide variety of substrates; including aluminium, steel, glass, wood, metal primers and paint coating (2-c systems), metals, painted plastics and many different types of plastic.
Cure MechanismSikaflex®-227 cures by reaction with atmospheric moisture. At low temperatures, the water content of the air is generally lower and the curing reaction proceeds somewhat slower
Chemical ResistanceSikaflex®-227 is resistant to fresh water, aqueous cleaning solutions; temporarily resistant to fuels, mineral oils, vegetable and animal fats and oils; not resistant to organic and mineral acids, alcohol, and caustic solutions or solvents. The above information is offered for general guidance only.
Method of ApplicationSurface preparationSurfaces must be clean, dry and free from all traces of grease, oil and dust. As a rule, the substrates must be prepared in accordance with the instructions given in the current Sika Pre-Treatment Chart.
ApplicationCartridges: Cut tip to joint size.Puncture airtight seal. Install with hand or power operated gun.Unipacks: Place unipack in the application gun and snip off the closure clip. Cut off the tip of the nozzle to suit joint width and gun the sealant into the joint with a suitable compressed air or hand operated gun, taking care to avoid air entrapment. Once opened, packs should be used up within a relatively short space of time. Do not apply at temperatures below 40°F (5°C) or above 100°F (38°C). The optimum temperature for substrate and sealant is between 60°F (15°C) and 77°F (25°C). For advice on selecting and setting up a suitable pump system, please contact the System Engineering Department.
Tooling and finishingTooling and finishing must be carried out within the tack-free time of the sealant. Finishing agents or lubricants must be tested for suitability/ compatibility.
RemovalUncured Sikaflex®-227 can be removed from tools and equipment with Sika® Remover-208 or another suitable solvent. Once cured, the material can only be removed mechanically. Strictly follow the solvent manufacturer's instructions for use and warnings.Hands and exposed skin should be washed immediately using a suitable industrial hand cleaner and water. Do not use solvents on the skin!
OverpaintingSikaflex®-227 can be overpainted when tack-free. The paint and paint process must be tested for compatibility by carrying out preliminary trials. Sikaflex®-227 should not be exposed to baking temperatures until it has attained a full cure. It should be understood that the hardness and film thickness of the paint may impair the elasticity of the sealant and lead to cracking of the paint film with time.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Sikaflex®-111 Stick & Seal Black: Seal, Bond, and Build with Ease
Product Overview
The one-stop solution for all your adhesive and sealing needsSikaflex®-111 Stick & Seal Black.
Advantages
Bonds effortlessly to a myriad of substrates with no surface pre-treatment needed
Excellent for use on damp concrete
Fully compatible with most construction materials
Durable against weathering and mechanical wear
CE Marked for quality assurance
Usage Scenarios
This versatile product is perfect for:
Concrete
Masonry
Stones
Ceramic
Wood
Metal
Glass
Plastics including PVC, PA, PET, and EPS/XPS
Packaging
Available in 290 ml cartridges, packed 12 cartridges per box.
Color Options
Also available in White and Concrete Grey.
Application Guidelines
For best results, the substrate should be free of contaminants. Further instructions for both porous and non-porous substrates are available.
Cleaning & Maintenance
Use Sika® Remover-208 for cleaning tools and Sika® Cleaning Wipes for skin.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Sikaflex®-111 Stick & Seal Grey: The Multipurpose Adhesive & Sealant
Product Overview
Experience the versatility of Sikaflex®-111 Stick & Seal, a 1-part adhesive and sealant that caters to both internal and external projects.
Key Advantages
Bonds to a plethora of substrates without the need for surface pre-treatment
Excellent adhesion to damp concrete
Compatible with a multitude of construction materials
Strong mechanical and weathering resistance
CE Marking for quality assurance
Usage
Sikaflex®-111 is perfect for bonding and sealing the following materials:
Concrete
Masonry
Most stones
Ceramic
Wood
Metal
Glass
Various Plastics
Packaging
Available in 290 ml cartridges, 12 per box.
Color Options
Choose from White, Concrete Grey, or Black to match your project requirements.
Application Instructions
Ensure the substrate is clean and free of contaminants for optimum adhesion. For detailed application instructions, please contact Sika Technical Services.
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Sikaflex®-291 Tube Black: Marine-Grade, Multipurpose Polyurethane Sealant
Product Benefits
IMO Certified
Bonds to a wide variety of substrates
Good ageing and weathering resistance
Elastic and low odour
Non-corrosive, Overpaintable and Sandable
Usage
Sikaflex®-291 is a multipurpose product suitable for marine constructions. It is ideal for making elastic, vibration-resistant joint seals and can also be used for interior sealing applications.
Application Information
Surface preparation is key. Surfaces must be clean, dry and free from grease, oil, and dust. Further application tips can be found in the Sika Pre-treatment Chart for Marine Applications.
Additional Details
Application Temperature: 5 ? 40 °C
Skin Time: 60 minutes
Shore A Hardness: 40
Shelf Life: 12 months when stored below 25°C
In Stock - Ready to ship
Express Post: 1-3 Days | Standard Post: 2-5 Days
Premium one component room temperature vulcanising silicone sealant
USE
Fridge and freezer sealing
Pizza oven sealing
Oven sealing
Aluminium
Glass
CHARACTERISTICS AND ADVANTAGES
High temperature resistance (-50 to 250OC)
Excellent adhesion
Gap filling properties
Heat proof
Vibration resistant
Highly versatile
PACKAGING: 300 ml cartridges
COLOUR: Black
SikaSeal® Appliance Silicone Sealant is a premium one component room temperature vulcanising (RTV) silicone rubber designed for flexible gasketing and sealing applications. SikaSeal® Appliance Silicone Sealant forms a tough but flexible seal of all shapes and sizes and fills any surface voids. The cured product can withstand vibration, weathering, temperature extremes, water oil and grease without hardening, shrinking or cracking.
Uses
Fridge and freezer sealing
Pizza oven sealing
Oven sealing
Aluminium
Glass
Characteristics / Advantages
High temperature resistance (-50 - 250°C)
Excellent adhesion
Heat proof
Gap Filling properties
Vibration resistant
Highly versatile
Product Data
Colour Black
Packaging 300ml Cartridge, 12 cartridges per box
Storage
18 months from date of production if stored in undamaged and unopened original sealed containers, in dry conditions and protected from direct sunlight at temperatures between +10ºC and +25ºC.
Technical Data
Chemical Base 1-C silicone
Density (uncured) 1.0 kg/l approx.
Skin Time 10 min approx.
Tack-free time 20 min approx.
Curing Time 24 hours approx.
Cure Mechanism Moisture-curing
Cure Type Acetoxy
Application temperature 5 - 45°C
Mechanical/Physical Properties
Tensile Strength 1.0 N/mm2 approx.
Shore a Hardness 25 approx.
Ultimate Elongation 600% approx.
Application Details
Ensure all surfaces are clean, dry and free from dust, grease and loose material. Remove all old gasket material from mating surfaces before cleaning with a residue-free solvent and allowing drying properly. Cut the nozzle at a 45° angle to the desired bead size (3 mm is suitable for most applications) then apply a continuous and even bead along the joint. Cure Mechanism SikaSeal® Appliance cures by reaction with atmospheric moisture. The reaction thus starts at the surface and proceeds to the core of the joint. The curing speed depends on the relative humidity, temperature and thickness of the sealant. At low temperatures, the water content of the air is lower and the curing reaction proceeds more slowly.
Clean Up Uncured, excess SikaSeal® Appliance may be removed with Sika® Remover-208 or another suitable solvent. Once cured, the excess sealant can be trimmed away from the edges with a knife.
Application Conditions/ Limitations
Restrictions On Use SikaSeal® Appliance is not recommended for use in applications where it will be permanently exposed to temperatures exceeding 250°C or in contact with fuels. The above information is offered for general guidance only.
![Sika Sikaflex 118 Extreme Grab 290ml [White]](//gluesaustralia.com.au/cdn/shop/files/7612895530055_35bcc6bf-bbee-4219-b850-30fa7a6b83ac.png?v=1754711711&width=645)
![Sika Sikaflex 221 Heavy Duty Adhesive Sealant 310ml [Black]](//gluesaustralia.com.au/cdn/shop/files/4520524003395_211a040d-fd65-46e4-b320-62196c5157c2.png?v=1754711709&width=645)
![Sika Sikaflex 221 Heavy Duty Adhesive Sealant 310ml [White]](//gluesaustralia.com.au/cdn/shop/files/4520524003593_20527af7-fe08-426c-ab91-1e7cb16de683.png?v=1754711708&width=645)
![Sika Sikaflex 252 High Strength Structural Adhesive Sealant [Black]](//gluesaustralia.com.au/cdn/shop/files/7612895456188_c10ea96d-b0be-41ba-a0ee-9656fab35b16.jpg?v=1754711652&width=645)
![Sika Sikaflex 252 High Strength structural Adhesive Sealant [White]](//gluesaustralia.com.au/cdn/shop/files/7612895456164_5c293f0a-df90-415e-875b-0ed963018cfa.jpg?v=1754711706&width=645)
![Sika Sikaflex 291 Marine Adhesive Sealant [Black]](//gluesaustralia.com.au/cdn/shop/files/45205240096_bb4dfb0d-a336-4739-9b91-9ca89764b874.jpg?v=1754711704&width=645)
![Sika Sikaflex 291 Marine Adhesive Sealant [White]](//gluesaustralia.com.au/cdn/shop/files/45205240096_bb9d6399-3f9c-4c6e-aeb9-97604f6829a6.jpg?v=1754711703&width=645)
![Sika Sikaflex Pro+ Sealant 310ml [White]](//gluesaustralia.com.au/cdn/shop/files/4520524025.jpg?v=1754724135&width=645)
![Sika SikaSeal 300 Glass & Weather Seal [Transparent]](//gluesaustralia.com.au/cdn/shop/files/9318324011314_17b1b8c7-fa52-428b-bf6f-872b3b964d3b.png?v=1754711699&width=645)
![Sika SikaSeal Flexible Gap Filler Super-200 Paintable [Transparent]](//gluesaustralia.com.au/cdn/shop/files/9318324010690_a135bef3-1e63-49fe-b52d-552f6c48153c.png?v=1754711651&width=645)
![Sika SikaSeal Roof & Gutter Silicone Sealant [Black]](//gluesaustralia.com.au/cdn/shop/files/9318324010461.png?v=1754724138&width=645)
![Sika SikaSeal Roof & Gutter Silicone Sealant [Grey]](//gluesaustralia.com.au/cdn/shop/files/9318324010454.png?v=1754724138&width=645)
![Sika Sikasil 670 Fire Resistant Silicone Sealant [Grey]](//gluesaustralia.com.au/cdn/shop/files/7612895181462_fe2d5a8d-2a66-433f-9d24-2dfa9adec11a.jpg?v=1754711694&width=645)
![Sika Sikasil Pool Silicone Water Resistance [White]](//gluesaustralia.com.au/cdn/shop/files/7612894609400_e5cdedf3-65af-430d-be37-52c0a1c7ff7a.png?v=1754711689&width=645)
![Sikaflex Sika 227 Automotive Sealant Fast Curing non-sagging 310ml [Black]](//gluesaustralia.com.au/cdn/shop/files/4520524003562_9dff8874-70fe-48dd-b768-e32af265ef3b.jpg?v=1754711664&width=645)
![Sikaflex Sika 227 Automotive Sealant Fast Curing non-sagging 310ml [White]](//gluesaustralia.com.au/cdn/shop/files/4520524002800_e901daee-d941-4c51-bb2c-fdfedd9a6316.jpg?v=1754711662&width=645)
![Sika Sikaflex 118 Extreme Grab 290ml [White]](http://gluesaustralia.com.au/cdn/shop/files/7612895530055_35bcc6bf-bbee-4219-b850-30fa7a6b83ac.png?v=1754711711&width=645)
![Sika Sikaflex 221 Heavy Duty Adhesive Sealant 310ml [Black]](http://gluesaustralia.com.au/cdn/shop/files/4520524003395_211a040d-fd65-46e4-b320-62196c5157c2.png?v=1754711709&width=645)
![Sika Sikaflex 221 Heavy Duty Adhesive Sealant 310ml [White]](http://gluesaustralia.com.au/cdn/shop/files/4520524003593_20527af7-fe08-426c-ab91-1e7cb16de683.png?v=1754711708&width=645)
![Sika Sikaflex 252 High Strength Structural Adhesive Sealant [Black]](http://gluesaustralia.com.au/cdn/shop/files/7612895456188_c10ea96d-b0be-41ba-a0ee-9656fab35b16.jpg?v=1754711652&width=645)
![Sika Sikaflex 252 High Strength structural Adhesive Sealant [White]](http://gluesaustralia.com.au/cdn/shop/files/7612895456164_5c293f0a-df90-415e-875b-0ed963018cfa.jpg?v=1754711706&width=645)
![Sika Sikaflex 291 Marine Adhesive Sealant [Black]](http://gluesaustralia.com.au/cdn/shop/files/45205240096_bb4dfb0d-a336-4739-9b91-9ca89764b874.jpg?v=1754711704&width=645)
![Sika Sikaflex 291 Marine Adhesive Sealant [White]](http://gluesaustralia.com.au/cdn/shop/files/45205240096_bb9d6399-3f9c-4c6e-aeb9-97604f6829a6.jpg?v=1754711703&width=645)
![Sika Sikaflex Pro+ Sealant 310ml [White]](http://gluesaustralia.com.au/cdn/shop/files/4520524025.jpg?v=1754724135&width=645)
![Sika SikaSeal 300 Glass & Weather Seal [Transparent]](http://gluesaustralia.com.au/cdn/shop/files/9318324011314_17b1b8c7-fa52-428b-bf6f-872b3b964d3b.png?v=1754711699&width=645)
![Sika SikaSeal Flexible Gap Filler Super-200 Paintable [Transparent]](http://gluesaustralia.com.au/cdn/shop/files/9318324010690_a135bef3-1e63-49fe-b52d-552f6c48153c.png?v=1754711651&width=645)
![Sika SikaSeal Roof & Gutter Silicone Sealant [Black]](http://gluesaustralia.com.au/cdn/shop/files/9318324010461.png?v=1754724138&width=645)
![Sika SikaSeal Roof & Gutter Silicone Sealant [Grey]](http://gluesaustralia.com.au/cdn/shop/files/9318324010454.png?v=1754724138&width=645)
![Sika Sikasil 670 Fire Resistant Silicone Sealant [Grey]](http://gluesaustralia.com.au/cdn/shop/files/7612895181462_fe2d5a8d-2a66-433f-9d24-2dfa9adec11a.jpg?v=1754711694&width=645)
![Sika Sikasil Pool Silicone Water Resistance [White]](http://gluesaustralia.com.au/cdn/shop/files/7612894609400_e5cdedf3-65af-430d-be37-52c0a1c7ff7a.png?v=1754711689&width=645)
![Sikaflex Sika 227 Automotive Sealant Fast Curing non-sagging 310ml [Black]](http://gluesaustralia.com.au/cdn/shop/files/4520524003562_9dff8874-70fe-48dd-b768-e32af265ef3b.jpg?v=1754711664&width=645)
![Sikaflex Sika 227 Automotive Sealant Fast Curing non-sagging 310ml [White]](http://gluesaustralia.com.au/cdn/shop/files/4520524002800_e901daee-d941-4c51-bb2c-fdfedd9a6316.jpg?v=1754711662&width=645)
