Description
Key features
- Dries clear for a neat, invisible finish
- Non toxic and low odour
- Water based for easy clean up before curing
- Suitable for brush or nozzle application
- Paintable when dry
- Strong bond on porous surfaces
Ideal for
- Paper, cardboard, photos, and scrapbooking
- Craft foam, felt, and fabric edge bonding
- Balsa wood and other light timbers
- School and hobby projects
Directions
- Ensure surfaces are clean, dry, and free of dust or oil.
- Apply a thin, even coat to one surface. For very porous materials, coat both surfaces.
- Join pieces while the glue is wet and press firmly. Clamp or weight if needed.
- Wipe away excess with a damp cloth.
- Allow to set. Light handling is typically possible after 30 to 60 minutes. Full strength develops after 24 hours.
Clean up
Clean tools and fresh spills with a damp cloth. Once cured, scraping or sanding may be required.
Handy tips
- For stronger joints on timber, lightly sand and dry fit pieces before gluing.
- Avoid excessive glue, which can lead to slow drying and warping on thin paper.
- Not suitable for continuous water immersion or load bearing joins.
Storage
Replace cap after use. Store upright in a cool, dry place away from frost and direct heat.
Safety
Non toxic formula. If irritation occurs, discontinue use.
Technical details
| Base |
PVA emulsion |
| Appearance |
White, dries clear |
| Viscosity |
Medium, smooth flow |
| Open time |
Up to 10 minutes depending on surface and coat weight |
| Set time |
Approx. 30 to 60 minutes |
| Full cure |
24 hours |
| Water resistance |
Not recommended for prolonged moisture exposure |
| Paintable |
Yes, once fully dry |
