🌍 Worldwide Shipping Available | Fast & Secure Delivery ✈️

Dunlop Express Wet Area Waterproofing Membrane – 5kg

Description

Dunlop Express Wet Area Waterproofing Membrane is a high-performance, fast-drying liquid membrane designed for use in internal wet areas including bathrooms, showers, laundries, and kitchens. This flexible, water-based acrylic polyurethane formulation creates a seamless and highly durable waterproof barrier that is tile-ready within hours.

It’s suitable for use under tile adhesives, screeds, and other flooring products. The product forms a tough, elastomeric layer that resists movement, cracking, and water penetration. It meets the requirements of Class III membranes and is suitable for both floor and wall applications.

Surface Preparation:
Ensure all surfaces are clean, dry, and structurally sound. Remove dust, grease, oil, curing compounds, and loose or flaking materials. Prime all surfaces using a compatible primer. On porous or highly absorbent surfaces, apply a second primer coat if needed. Any existing cracks, gaps, or joints should be sealed or reinforced using bond breakers or reinforcing fabric.

Application Instructions:

  • Apply the membrane using a brush or roller.

  • Two coats are required for effective waterproofing.

  • First coat should be applied in one direction.

  • Once dry to the touch (approx. 2 hours), apply the second coat in the opposite direction.

  • Membrane should extend at least 150mm up walls in general wet areas and 1.8m in shower recesses.

  • Waterproofing must be applied continuously and without breaks or pinholes.

  • Use reinforcing fabric over joints and corners if required.

  • Avoid application in conditions below 10°C or above 35°C.

Coverage:
Approximately 1m² per litre per coat. A 5kg pail covers roughly 2.5m² with two coats, depending on surface porosity.

Drying Time:

  • Touch dry: 1–2 hours

  • Recoat time: 2 hours

  • Ready for tiling: 4–6 hours

  • Fully cured: 24 hours
    Drying times will vary with ambient temperature and humidity.

Clean Up:
Clean tools and equipment immediately after use with water. Do not allow membrane to dry on tools.

Technical Data:

  • Type: Water-based acrylic polyurethane

  • Classification: Class III membrane

  • Application Method: Brush or roller

  • Flexibility: High

  • Water Resistance: Excellent

  • Colour: Grey

  • Shelf Life: 12 months (unopened in cool, dry conditions)

Dunlop Express Wet Area Waterproofing Membrane – 5kg

Product form

Dunlop Express Wet Area Waterproofing Membrane is a high-performance, fast-drying liquid membrane designed for use in internal wet areas including... Read more

In Stock  Express Post: 1-3 Days | Standard Post: 2-5 Days

$80.40

    • Guaranteed secure & safe checkout.

      paypal

      Description

      Dunlop Express Wet Area Waterproofing Membrane is a high-performance, fast-drying liquid membrane designed for use in internal wet areas including bathrooms, showers, laundries, and kitchens. This flexible, water-based acrylic polyurethane formulation creates a seamless and highly durable waterproof barrier that is tile-ready within hours.

      It’s suitable for use under tile adhesives, screeds, and other flooring products. The product forms a tough, elastomeric layer that resists movement, cracking, and water penetration. It meets the requirements of Class III membranes and is suitable for both floor and wall applications.

      Surface Preparation:
      Ensure all surfaces are clean, dry, and structurally sound. Remove dust, grease, oil, curing compounds, and loose or flaking materials. Prime all surfaces using a compatible primer. On porous or highly absorbent surfaces, apply a second primer coat if needed. Any existing cracks, gaps, or joints should be sealed or reinforced using bond breakers or reinforcing fabric.

      Application Instructions:

      • Apply the membrane using a brush or roller.

      • Two coats are required for effective waterproofing.

      • First coat should be applied in one direction.

      • Once dry to the touch (approx. 2 hours), apply the second coat in the opposite direction.

      • Membrane should extend at least 150mm up walls in general wet areas and 1.8m in shower recesses.

      • Waterproofing must be applied continuously and without breaks or pinholes.

      • Use reinforcing fabric over joints and corners if required.

      • Avoid application in conditions below 10°C or above 35°C.

      Coverage:
      Approximately 1m² per litre per coat. A 5kg pail covers roughly 2.5m² with two coats, depending on surface porosity.

      Drying Time:

      • Touch dry: 1–2 hours

      • Recoat time: 2 hours

      • Ready for tiling: 4–6 hours

      • Fully cured: 24 hours
        Drying times will vary with ambient temperature and humidity.

      Clean Up:
      Clean tools and equipment immediately after use with water. Do not allow membrane to dry on tools.

      Technical Data:

      • Type: Water-based acrylic polyurethane

      • Classification: Class III membrane

      • Application Method: Brush or roller

      • Flexibility: High

      • Water Resistance: Excellent

      • Colour: Grey

      • Shelf Life: 12 months (unopened in cool, dry conditions)

      Recently viewed products

        Login

        Forgot your password?

        Don't have an account yet?
        Create account