Description
Dunlop Ready-to-Go Coloured Grout is a premium, pre-mixed grout for fast, clean results on walls and floors. No mixing, no mess, just open, apply, and buff for a smooth, long-lasting finish. The formula includes Grout Shield for anti-mould and anti-bacterial protection to help surfaces stay cleaner for longer. Suitable for interior and exterior applications, and available in a wide colour range to match or contrast your tiles.
- Ready-mixed convenience, apply straight from the tub
- Contains Grout Shield for mould and bacteria resistance
- Use on walls & floors, indoors & outdoors*
- Ideal for joint widths from 1–5 mm
- Great for rejuvenating old grout (min. removal depth: 1 mm walls, 2 mm floors)
*Always follow the data sheet guidance for your specific area and exposure.
Where to Use
- Ceramic, porcelain and most glazed tiles
- Bathrooms, kitchens, splashbacks, laundries, living areas
- Light-duty exterior tiled areas (check exposure & substrate)
This grout is designed for typical domestic and light commercial tiling where a smooth, uniform finish is desired.
Colours & Finish
Available in a contemporary colour palette (e.g. whites and greys) to complement most tile styles. Use Dunlop’s colour selector to visualise combinations before you start.
Coverage
Coverage varies by tile size, joint width and depth. As a guide (per kg) of grout:
| Tile size (L×W×Thickness) |
Joint width 1.5 mm |
Joint width 3 mm |
Joint width 5 mm |
| 25×25×4 mm mosaics |
≈1.04 m²/kg |
≈0.52 m²/kg |
≈0.31 m²/kg |
| 100×100×8 mm |
≈2.08 m²/kg |
≈1.04 m²/kg |
≈0.63 m²/kg |
| 200×200×8 mm |
≈4.17 m²/kg |
≈2.08 m²/kg |
≈1.25 m²/kg |
Tip: Allow an extra 10–15% for wastage due to technique, tile type and site conditions.
Directions (Summary)
-
Prep: Ensure joints are clean, dry, and free from dust, adhesive residue and contaminants. For rejuvenation, remove at least 1 mm (walls) or 2 mm (floors) of old grout.
-
Apply: Using a rubber grout float, force grout firmly into joints at a 45° angle.
-
Strike & shape: Allow grout to firm in the joint (~15 mins). Shape joints as required.
-
Clean: Wipe diagonally with a dense, damp sponge, rinsing frequently. Use minimal water to reduce shade variation and shrinkage.
-
Buff: When touch-dry (typically 6–24 hrs), buff tile faces with a clean, dry cloth.
Drying & Use
- Initial set at ~24 hrs at 23 °C / 50% RH
- Shower walls can be exposed to water after ~24 hrs
Clean-Up & Storage
Clean tools and residue with water while the grout is still wet. Reseal the tub between uses to prevent skinning. Store upright in a cool, dry place.
Safety
Read the Safety Data Sheet before use and follow PPE guidance. Avoid contact with eyes and prolonged skin contact. Keep out of reach of children.
