Meet your go to epoxy putty for fast, permanent style repairs. Gorilla All Purpose Epoxy Stick is a hand mixable putty that sets in about 10 minutes and cures in 24 hours to a tough, machinable finish. Once cured it can be drilled, sanded, and painted. It is waterproof, non rusting, and ready for indoor or outdoor jobs around the home, car, boat, and garden.
Why you will like it
- Fast setting. Approximate set time 10 minutes. Paintable after about 1 hour.
- Full cure in about 24 hours for a hard wearing repair.
- Works on most common materials including metal, PVC, many rigid plastics, wood, stone, ceramic, brick, concrete, fiberglass, and glass.
- Non rusting formulation for durable repairs in wet or humid areas.
- Waterproof when cured. Suitable for indoor and outdoor use.
- NSF ANSI 61 certified drinking water safe for contact with potable water once cured.
Great for
- Plumbing repairs such as sealing low pressure leaks and patching drainage pipes
- Automotive trims and general panels that do not exceed service temperature of typical epoxy repairs
- Household fixes like filling holes, anchoring hardware, rebuilding small parts, and edge repairs
- DIY and craft projects that need a sculptable, sandable fill
Important use notes
- Not for exhaust systems.
- For plumbing, use for temporary repair of drainage pipes or low pressure pipes only. Turn water off, apply, then wait at least 1 hour before turning water back on.
- Bonded wood should not be submerged or soaked after repair.
How to use
- Wear disposable gloves. Work in a well ventilated area.
- Prepare the surface. Clean off dust, oil, and loose material. Roughen smooth surfaces with sandpaper.
- Cut the amount you need. Remove the film wrapper and foil sticker. Reseal unused putty to limit air exposure.
- Knead for 30 to 60 seconds until the colour is uniform. Mix thoroughly or it will not harden completely.
- Apply within 5 minutes of mixing. Press firmly into place. Smooth with wet gloved fingers if a smooth finish is desired.
- Remove any squeeze out before hardening. Allow to set about 10 minutes. Paint after about 1 hour. Full cure about 24 hours.
Specifications
Format |
Hand mixable epoxy putty stick |
Size |
56.7 g |
Set time |
About 10 minutes |
Paintable |
After about 1 hour |
Full cure |
About 24 hours |
Indoor or outdoor |
Yes, waterproof when cured |
Drill, sand, paint after cure |
Yes |
Drinking water contact |
NSF ANSI 61 certified drinking water safe once cured |
Clean up and storage
- While uncured, wipe away with soap and water, acetone, or isopropyl alcohol.
- For cured material, remove by sanding, scraping, or chiseling.
- Store the stick in its vial with film and foil sticker re applied. Keep sealed in a cool, dry place. Keep away from children and animals.
Safety
Wear gloves during mixing and application. Avoid contact with skin and eyes. If in eyes rinse with water for 15 minutes. If on skin wash with soap and water. Use in a well ventilated area. For medical emergencies in Australia call 000.