Description
The Kincrome K28220 is a 47 piece, 1/2" drive metric impact socket and bit set built for workshop and trade use with air tools and power tools. It pairs twelve impact rated sockets with a driver, an extension bar and a 33 piece bit set, all stored together in a machined tin case.
About the product
The sockets and accessories are made from chrome molybdenum steel (Cr-Mo), which Kincrome hardens and tempers for tough, high torque work. Kincrome states the range meets and exceeds ANSI, DIN 3121 and DIN 3129 standards. The metric sockets run from 10mm to 27mm, covering the common fastener sizes met in automotive, mechanical and general workshop jobs.
Where to use it
Indoors: workshop and garage maintenance, machinery servicing and general mechanical repairs with an impact wrench or impact driver.
Outdoors: wheel nuts, suspension bolts, trailer work and equipment repairs on site or in the driveway.
What is included
- 12 x 1/2" drive metric impact sockets: 10, 12, 13, 14, 15, 16, 17, 18, 19, 21, 24 and 27mm
- 1 x 1/2" socket driver
- 1 x 1/2" impact extension bar, 150mm
- 1 x 33 piece, 25mm impact bit set (Phillips, hex, square, Torx and blade)
- Machined tin storage case with PVC tray
How to use it
Fit the socket or bit to a 1/2" drive pneumatic or power tool, use the extension bar where access is tight, and return each piece to its place in the tray after the job. Always wear eye protection, and never hold the socket or accessory while the tool is running. Stop driving once a fastener is tight rather than continuing to hammer it. Do not use damaged or worn sockets or accessories.
Important notes
Use only impact rated sockets and accessories on impact tools, and never swap in standard sockets. Check pieces regularly and replace any that are cracked, rounded or worn.
Specifications
| Brand |
Kincrome |
| Model number |
K28220 |
| Product |
47 Piece Impact Socket & Bit Set |
| Pieces |
47 |
| Drive size |
1/2" |
| Measurement |
Metric |
| Socket size range |
10mm to 27mm |
| Extension bar |
150mm |
| Bit set |
33 piece, 25mm |
| Material |
Chrome molybdenum (Cr-Mo) steel |
| Colour |
Blue |
| Case |
Machined tin case with PVC tray |
| Standards |
ANSI, DIN 3121 and DIN 3129 (as stated by Kincrome) |
| Case dimensions |
240 x 110 x 45mm |
| Weight |
2.45kg |
Care and storage
Wipe sockets and bits clean after use and keep them in the case to protect them from moisture and knocks. Store the case in a dry place away from damp. Inspect pieces before each use and retire any that show damage or wear.
