Description
Protek Type N Clear Solvent Cement is a PVC-U pipe cement made for non-pressure joints, supplied here in a 250ml container with a built-in brush cap. It is designed for plumbers, electricians and DIYers who are joining PVC pipe, fittings and sheet on drainage, sewerage, stormwater and conduit work.
About the formula
A clear, viscous, solvent-based cement that softens the PVC surfaces so the pipe and fitting fuse into one joint as the solvent evaporates. It is formulated for non-pressure (Type N) applications only. The manufacturer states it conforms to AS/NZS 3879 and is approved to AS/NZS 4020 for use in contact with drinking water. It also carries Watermark and ISO 9001:2008 accreditation, is Australian made and comes with a 10 year manufacturer's warranty. The container cap carries a natural bristle brush, so there is no separate applicator to buy.
Where to use it
Indoors: waste and drainage pipework, electrical conduit and PVC sheet jointing in residential, commercial and industrial buildings.
Outdoors: sewerage, drainage and stormwater lines in non-pressure PVC-U pipe up to 100mm diameter.
Suitable material: PVC-U pipe, fittings and sheet. It is not intended for pressure pipe systems.
How to use it
- Cut the pipe square, remove burrs from the inside and outside edges, and dry fit the joint to check alignment.
- Wipe the spigot and socket clean and dry, then clean and prime both surfaces with Protek Priming Fluid. Priming is recommended before applying the cement.
- Brush an even coat of cement onto the spigot and inside the socket, push the joint together promptly and hold it briefly.
- Work on one joint at a time, wipe away excess cement and reseal the cap tightly after use.
- Follow the jointing method in AS/NZS 2032 and the manufacturer's instructions for set and cure times.
Important notes
Type N cement is for non-pressure applications only. Use a Type P cement for pressure pipe. The retailer data lists this size for PVC pipe up to 100mm diameter. Use in a well-ventilated area, because the vapour is strong and the cement is highly flammable. Do not use it on other plastics.
Specifications
| Brand |
Protek |
| Product |
Type N Clear Solvent Cement (Model A6006) |
| Size |
250ml |
| Colour |
Clear |
| Base |
Solvent-based, viscous liquid |
| Application |
Brush applied, via the cap-mounted natural bristle brush |
| Standards and approvals |
AS/NZS 3879, AS/NZS 4020, Watermark, ISO 9001:2008 |
| Use |
Joints in non-pressure PVC-U pipe, fittings and sheet |
| Origin and warranty |
Australian made, 10 year manufacturer's warranty |
| Low VOC |
No |
Safety
The main ingredients are methyl ethyl ketone, cyclohexanone and tetrahydrofuran. Keep away from heat, sparks, open flames and other ignition sources, and do not smoke. Use outdoors or with good ventilation, and wear safety glasses or goggles and chemical-resistant gloves. Store in the original container, tightly sealed, in a cool, well-ventilated place away from ignition sources. Refer to the Safety Data Sheet (SDS) for full details.
