Selleys Araldite Rapid Epoxy Adhesive 14 mL
Fast-setting, two-part epoxy for quick, durable repairs at home, in the workshop, or on site. The self-mixing syringe makes application clean and precise, setting in about 90 seconds and reaching handling strength soon after. Dries translucent for a neat finish.
Key benefits
- Sets in approximately 90 seconds for rapid fixes
- High strength bond up to 75 kg/cm² when fully cured
- Dries translucent for low-visibility repairs
- Self-mixing nozzle for easy, accurate application
- Versatile bonding across common materials
Best for
- Everyday repairs and small assemblies
- Fixing chipped ceramics and china
- Metal, glass, leather, rubber, and many plastics
Suitable materials
China, metal, glass, leather, rubber, and most plastics. Not suitable for PTFE, polyethylene, or polypropylene.
How to use
-
Prep Abrade, clean, and dry both surfaces.
-
Attach nozzle Remove cap, fit and lock the self-mixing nozzle, then purge a small amount until evenly mixed.
-
Apply Spread adhesive on both surfaces and join within 1 minute.
-
Hold Support the bond for about 10 minutes to prevent movement.
-
Cure Maximum strength develops after about 16 hours. Allow longer in cold conditions.
Clean up
Wipe away uncured adhesive with acetone. Remove and dispose of the used mixing nozzle before the adhesive sets in the tip.
Technical details
| Technology |
Two-part epoxy |
| Set time |
About 90 seconds |
| Handling time |
Approximately 10 minutes |
| Full cure |
About 16 hours |
| Colour when dry |
Translucent |
| Temperature resistance |
Up to 60 °C |
| Pack size |
14 mL self-mixing syringe |
Good to know
- Bond may soften above 60 °C and regains strength when cooled.
- Pre-test on leather and rubber to confirm suitability.
- May discolor with prolonged UV exposure.
- Store in a cool, dry place. Replace cap after removing the used nozzle.
Safety
Follow the safety directions on the packaging. Use in a well-ventilated area and avoid skin contact. Keep out of reach of children.
