Selleys Auto Fix Windscreen Sealant 100 mL - Black
Stop leaks fast around windscreens and windows with a durable, weather resistant silicone seal. Selleys Auto Fix Windscreen Sealant forms a waterproof barrier that resists vibration, UV and temperature extremes, keeping water, dust and drafts out.
Why choose this sealant
- 100 percent neutral cure silicone for reliable sealing
- Forms a waterproof seal to stop leaks quickly
- UV and weather resistant for long term performance
- Skins in 5 minutes and is touch dry in about 30 minutes
- Handles joint movement up to 25 percent
Suitable surfaces
- Glass and windscreens
- Rubber surrounds and trims
- Painted surfaces and most plastics
- Metal frames and channels
Typical applications
- Sealing between windscreen glass and rubber
- Sealing between rubber and metal frames
- Stopping minor water ingress around vehicle windows
- General sealing where a flexible, black silicone finish is desired
Key specifications
| Technology |
Neutral cure silicone |
| Colour |
Black |
| Movement capability |
Up to 25 percent |
| Skin time |
About 5 minutes |
| Set time |
About 30 minutes |
| Full cure |
Approximately 24 hours |
| Service temperature |
-40°C to 180°C |
| Application temperature |
-20°C to 50°C |
| VOC |
26 g/L |
| Pack size |
100 mL tube |
Directions
- Remove any dirt or moisture between the rubber and glass, or rubber and metal. Clean with mineral turpentine and allow to dry.
- Remove cap, unscrew nozzle, pierce inner seal, refit nozzle, then cut the tip at a 45 degree angle.
- Insert the nozzle between the rubber and glass or rubber and metal where possible. Squeeze the tube with steady pressure to push sealant into the joint. Smooth off with a gloved finger.
- If additional smoothing is needed, do it before the sealant skins.
- Clean up uncured sealant with mineral turpentine. Cured material must be cut or scraped away.
- Replace the cap after use. Allow sealant in the nozzle to cure, then remove before next use.
Handy tips
- For neat lines, mask both sides of the joint and remove tape before the sealant skins.
- Best results occur when the joint is clean, dry and free of loose material.
Limitations
- Not recommended on natural rubber, NBR or chloroprene neoprene due to poor adhesion.
Clean up and storage
- Clean uncured sealant with mineral turpentine. Remove cured sealant by cutting or scraping.
- Store in a cool, dry place below 30°C. Use within 24 months of production.
What you get
- 1 x Selleys Auto Fix Windscreen Sealant 100 mL - Black
